Tunable mesoporous bilayer photonic resins with chiral nematic structures and actuator properties

Polysaccharide Nanocrystals-Based Chiral Nematic Structures: From Self-Assembly Mechanisms, Regulation, to Applications

Chiral architectures, one of the key structural features of natural systems ranging from the nanoscale to macroscale, are an infinite source of inspiration for functional materials. Researchers have been, and still are, strongly pursuing the goal of constructing such structures with renewable and sustainable building blocks via simple and efficient strategies. With the merits of high sustainability, renewability, and the ability to self-assemble into chiral nematic structures in aqueous suspensions that can be preserved in the solid state, polysaccharide nanocrystals (PNs) including cellulose nanocrystals (CNCs) and chitin nanocrystals (ChNCs) offer opportunities to reach the target. We herein provide a comprehensive review that focuses on the development of CNCs and ChNCs for the use in advanced functional materials. First, the introduction of CNCs and ChNCs, and cellulose- and chitin-formed chiral nematic organizations in the natural world, are given. Then, the self-assembly process of such PNs and the factors influencing this process are comprehensively discussed. After that, we showcased the emerging applications of the self-assembled chiral nematic structures of CNCs and ChNCs. Finally, this review concludes with perspectives on the challenges and opportunities in this field.

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Bioinspired humidity-responsive liquid crystalline materials: from adaptive soft actuators to visualized sensors and detectors

Inspired by nature, humidity-responsive materials and devices have attracted significant interest from scientists in multiple disciplines, ranging from chemistry, physics and materials science to biomimetics. Owing to their superiorities, including harmless stimulus and untethered control, humidity-driven materials have been widely investigated for application in soft robots, smart sensors and detectors, biomimetic devices and anticounterfeiting labels. Especially, humidity-responsive liquid crystalline materials are particularly appealing due to the combination of programmable and adaptive liquid crystal matrix and humidity-controllability, enabling the fabrication of advanced self-adaptive robots and visualized sensors. In this review, we summarize the recent progress in humidity-driven liquid crystalline materials. First, a brief introduction of liquid crystal materials, including liquid crystalline polymers, cholesteric liquid crystals, blue-phase liquid crystals and cholesteric cellulose nanocrystals is provided. Subsequently, the mechanisms of humidity-responsiveness are presented, followed by the diverse strategies for the fabrication of humidity-responsive liquid crystalline materials. The applications of humidity-driven devices will be presented ranging from soft actuators to visualized sensors and detectors. Finally, we provide an outlook on the development of humidity-driven liquid crystalline materials.

Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review

Cellulosic sources, such as lignocellulose-rich biomass, can be mechanically or acid degraded to produce inclusions called cellulose nanocrystals (CNCs). They have several uses in the sectors of biomedicine, photonics, and material engineering because of their biodegradability, renewability, sustainability, and mechanical qualities. The processing and design of CNC-based products are inextricably linked to the rheological behaviour of CNC suspension or in combination with other chemicals, such as surfactants or polymers; in this context, rheology offers a significant link between microstructure and macro scale flow behaviour that is intricately linked to material response in applications. The flow behaviour of CNC items must be properly specified in order to produce goods with value-added characteristics. In this review article, we provide new research on the shear rheology of CNC dispersion and CNC-based hydrogels in the linear and nonlinear regime, with storage modulus values reported to range from ~10^-3 to 10³ Pa. Applications in technology and material science are also covered simultaneously. We carefully examined the effects of charge density, aspect ratio, concentration, persistence length, alignment, liquid crystal formation, the cause of chirality in CNCs, interfacial behaviour and interfacial rheology, linear and nonlinear viscoelasticity of CNC suspension in bulk and at the interface using the currently available literature.

Dual-emitting cellulose nanocrystal hybrid materials with circularly polarized luminescence for anti-counterfeiting labels

Cellulose nanocrystal (CNC) hybrid materials with numerous optical states have great potential as anti-counterfeiting labels and information encryption materials. However, it is challenging to construct multicolor emitting materials with tunable behaviors, which can dramatically enhance anti-counterfeiting abilities. Here, free-standing composite films with vivid multi-structural colors and dual-emitting fluorescence are successfully fabricated through a host-guest coassembly strategy. The lanthanide complex and an aggregation-induced emission molecule (tetraphenylethylene derivative, TPEC) are selected as luminescent guests, which are integrated into the chiral nematic structure of CNCs. The obtained photonic films display broadband reflection across the visible spectrum, which may be attributed to the chiral nematic domains with variations in the helical pitches and helical axis orientations. Under 254 nm excitation, the film exhibits bright red emission, while blue-green emission switching occurs under 365 nm excitation. The broad reflection band of the film covers both the green and red fluorescent emission centers, and right circularly polarized luminescence emission with different dissymmetry factors is produced due to the selective reflection of the left chiral nematic structure. A large glum value up to -0.21 at 600 nm was realized. Additionally, CNC-based materials with tailored shapes are further used in anti-counterfeit tags and decorative applications.

Naturally Derived Janus Cellulose Nanomaterials: Anisotropic Cellulose Nanomaterial Building Blocks and Their Assembly into Asymmetric Structures

Naturally derived cellulose nanomaterials (CNMs) with desirable physicochemical properties have drawn tremendous attention for their versatile applications in a broad range of fields. More recently, Janus amphiphilic cellulose nanomaterial particles with asymmetric structures (i.e., reducing and nonreducing ends and crystalline and amorphous domains) have been in the spotlight, offering a rich and sophisticated toolbox for Janus nanomaterials. With careful surface and interfacial engineering, Janus CNM particles have demonstrated great potential as surface modifiers, emulsifiers, stabilizers, compatibilizers, and dispersants in emulsions, nanocomposites, and suspensions. Naturally derived Janus CNM particles offer a fascinating opportunity for scaling up the production of self-standing Janus CNM membranes. Nevertheless, most Janus CNM membranes to date are constructed by asymmetric fabrication or asymmetric modification without considering the Janus traits of CNM particles. More future research should focus on the self-assembly of Janus CNM particles into bulk self-standing Janus CNM membranes to enable more straightforward and sustainable approaches for Janus membranes. This review explores the fabrication, structure-property relationship, and Janus configuration mechanisms of Janus CNM particles and membranes. Janus CNM membranes are highlighted for their versatile applications in liquid, thermal, and light management. This review also highlights the significant advances and future perspectives in the construction and application of sustainable Janus CNM particles and membranes.

Self-assembled liquid crystal architectures for soft matter photonics

Self-assembled architectures of soft matter have fascinated scientists for centuries due to their unique physical properties originated from controllable orientational and/or positional orders, and diverse optic and photonic applications. If one could know how to design, fabricate, and manipulate these optical microstructures in soft matter systems, such as liquid crystals (LCs), that would open new opportunities in both scientific research and practical applications, such as the interaction between light and soft matter, the intrinsic assembly of the topological patterns, and the multidimensional control of the light (polarization, phase, spatial distribution, propagation direction). Here, we summarize recent progresses in self-assembled optical architectures in typical thermotropic LCs and bio-based lyotropic LCs. After briefly introducing the basic definitions and properties of the materials, we present the manipulation schemes of various LC microstructures, especially the topological and topographic configurations. This work further illustrates external-stimuli-enabled dynamic controllability of self-assembled optical structures of these soft materials, and demonstrates several emerging applications. Lastly, we discuss the challenges and opportunities of these materials towards soft matter photonics, and envision future perspectives in this field.

Liquid crystal-based structural color actuators

Animals can modify their body shape and/or color for protection, camouflage and communication. This adaptability has inspired fabrication of actuators with structural color changes to endow soft robots with additional functionalities. Using liquid crystal-based materials for actuators with structural color changes is a promising approach. In this review, we discuss the current state of liquid crystal-based actuators with structural color changes and the potential applications of these structural color actuators in soft robotic devices.

Iridescent chiral nematic papers based on cellulose nanocrystals with multiple optical responses for patterned coatings

Chiral nematic papers (CNPs) with mesopores structure based on cellulose nanocrystals (CNCs) were fabricated successfully via a swelling and freeze-drying method. The order of the original chiral nematic cellulose nanocrystals film was preserved in CNPs, which was proved by scanning electron microscopy (SEM), polarized optical microscopy (POM) measurements and circular dichroism (CD) spectra. The CNPs exhibited excellent optical responsive properties to different solvents. Inspired by this feature, a colorable ink containing amounts of gel particles was prepared by pulverizing CNPs/water mixture into a suspension. Patterns written in suspension ink with various colors can be formed when soaked with different solvents. Moreover, CNPs displayed an irreversible color response to compression. Additionally, the hydrophilicity of CNPs was tuned by polyethyleneimine. Modified CNPs exhibited different colors under the identical solvent environment when compared to the original one. Aqueous PEI can be used as an ink to depict responsive photonic patterns on CNPs.

Pigmented Structural Color Actuators Fueled by Near-Infrared Light

Cuttlefish can modify their body shape and both their pigmentary and structural colors for protection. This adaptability has inspired the development of appearance-changing polymers such as structural color actuators, although in most cases, the original shape has been confined to being flat, and pigmented structural color actuators have not yet been reported. Here, we have successfully created a pigmented structural color actuator using a cholesteric liquid crystal elastomer with a lower actuation temperature where both actuation and coloration (structural and pigmental) are tunable with temperature and NIR light. The shape, structural color, and absorption of the NIR-absorbing dye pigment of the actuator all change with temperature. Light can be used to trigger local in-plane bending actuation in flat films and local shape changes in a variety of 3D-shaped objects. A cuttlefish mimic that can sense light and respond by locally changing its appearance was also made to demonstrate the potential of pigmented structural color actuators for signaling and camouflage in soft robotics.

Biomimetic Janus photonic soft actuator with structural color self-reporting

Soft actuators with variable signal/color play an important role in the fields of targeted locomotion, artificial phototropism, drug screening, cargo transportation, and interactive sensing. The ability to achieve rapid response, large curvature, wide bending angle, and full-color display continues to be an unresolved challenge for artificial actuating materials. Inspired by the angle-dependent structural color of broad-tailed hummingbird and the Janus wettability of the lotus leaf, a Janus photonic soft actuator (JPSA) was fabricated by integrating an underwater super-oleophilic copper micro-nano array and oil-phobic inverse opal through a Laplace channel. The JPSA exhibits unidirectional permeability to underwater oil droplets. Attractively, with the combination of a swellable super-oleophilic surface and photonic crystals, JPSAs were endowed with oil-controlled reversible bending behavior with self-reporting angle-dependent color indication. We described for the first time the directional actuating mechanism induced by underwater oil unidirectional penetration and revealed the corresponding actuating kinetics and the inner-stress distribution/transfer by using structural color. As an extension of such theory, a rapid responsive JPSA with a wide bending angle and full-color self-reporting is further fabricated. This work provides an efficient strategy for oil directional transportation and separation in aqueous media and inspires the fabrication of a soft actuator/sensor with structural color self-reporting.

Highly Tough, Stretchable, and Solvent-Resistant Cellulose Nanocrystal Photonic Films for Mechanochromism and Actuator Properties

Cellulose nanocrystals (CNCs)-derived photonic materials have confirmed great potential in producing renewable optical and engineering areas. However, it remains challenging to simultaneously possess toughness, strength, and multiple responses for developing high-performance sensors, intelligent coatings, flexible textiles, and multifunctional devices. Herein, the authors report a facile and robust strategy that poly(ethylene glycol) dimethacrylate (PEGDMA) can be converged into the chiral nematic structure of CNCs by ultraviolet-triggered free radical polymerization in an N,N-dimethylformamide solvent system. The resulting CNC-poly(PEGDMA) composite exhibits impressive strength (42 MPa), stretchability (104%), toughness (31 MJ m^-3 ), and solvent resistance. Notably, it preserves vivid optical iridescence, displaying stretchable variation from red, yellow, to green responding to the applied mechanical stimuli. More interestingly, upon exposure to spraying moisture, it executes sensitive actuation (4.6° s^-1 ) and multiple complex 3D deformation behaviors, accompanied by synergistic iridescent appearances. Due to its structural anisotropy of CNC with typical left-handedness, the actuation shows the capability to generate a high probability (63%) of right-handed helical shapes, mimicking a coiled tendril. The authors envision that this versatile system with sustainability, robustness, mechanochromism, and specific actuating ability will open a sustainable avenue in mechanical sensors, stretchable optics, intelligent actuators, and soft robots.

Directional, Low-Energy Driven Thermal Actuating Bilayer Enabled by Coordinated Submolecular Switching

The authors reveal a thermal actuating bilayer that undergoes reversible deformation in response to low-energy thermal stimuli, for example, a few degrees of temperature increase. It is made of an aligned carbon nanotube (CNT) sheet covalently connected to a polymer layer in which dibenzocycloocta-1,5-diene (DBCOD) actuating units are oriented parallel to CNTs. Upon exposure to low-energy thermal stimulation, coordinated submolecular-level conformational changes of DBCODs result in macroscopic thermal contraction. This unique thermal contraction offers distinct advantages. It's inherently fast, repeatable, low-energy driven, and medium independent. The covalent interface and reversible nature of the conformational change bestow this bilayer with excellent repeatability, up to at least 70 000 cycles. Unlike conventional CNT bilayer systems, this system can achieve high precision actuation readily and can be scaled down to nanoscale. A new platform made of poly(vinylidene fluoride) (PVDF) in tandem with the bilayer can harvest low-grade thermal energy and convert it into electricity. The platform produces 86 times greater energy than PVDF alone upon exposure to 6 °C thermal fluctuations above room temperature. This platform provides a pathway to low-grade thermal energy harvesting. It also enables low-energy driven thermal artificial robotics, ultrasensitive thermal sensors, and remote controlled near infrared (NIR) driven actuators.

Chiral Photonic Liquid Crystal Films Derived from Cellulose Nanocrystals

As a nanoscale renewable resource derived from lignocellulosic materials, cellulose nanocrystals (CNCs) have the features of high purity, high crystallinity, high aspect ratio, high Young's modulus, and large specific surface area. The most interesting trait is that they can form the entire films with bright structural colors through the evaporation-induced self-assembly (EISA) process under certain conditions. Structural color originates from micro-nano structure of CNCs matrixes via the interaction of nanoparticles with light, rather than the absorption and reflection of light from the pigment. CNCs are the new generation of photonic liquid crystal materials of choice due to their simple and convenient preparation processes, environmentally friendly fabrication approaches, and intrinsic chiral nematic structure. Therefore, understanding the forming mechanism of CNCs in nanoarchitectonics is crucial to multiple fields of physics, chemistry, materials science, and engineering application. Herein, a timely summary of the chiral photonic liquid crystal films derived from CNCs is systematically presented. The relationship of CNC, structural color, chiral nematic structure, film performance, and applications of chiral photonic liquid crystal films is discussed. The review article also summarizes the most recent achievements in the field of CNCs-based photonic functional materials along with the faced challenges.

Functional Materials from Nanocellulose: Utilizing Structure-Property Relationships in Bottom-Up Fabrication

It is inherently challenging to recapitulate the precise hierarchical architectures found throughout nature (such as in wood, antler, bone, and silk) using synthetic bottom-up fabrication strategies. However, as a renewable and naturally sourced nanoscale building block, nanocellulose-both cellulose nanocrystals and cellulose nanofibrils-has gained significant research interest within this area. Altogether, the intrinsic shape anisotropy, surface charge/chemistry, and mechanical/rheological properties are some of the critical material properties leading to advanced structure-based functionality within nanocellulose-based bottom-up fabricated materials. Herein, the organization of nanocellulose into biomimetic-aligned, porous, and fibrous materials through a variety of fabrication techniques is presented. Moreover, sophisticated material structuring arising from both the alignment of nanocellulose and via specific process-induced methods is covered. In particular, design rules based on the underlying fundamental properties of nanocellulose are established and discussed as related to their influence on material assembly and resulting structure/function. Finally, key advancements and critical challenges within the field are highlighted, paving the way for the fabrication of truly advanced materials from nanocellulose.

Highly Strong and Solvent-Resistant Cellulose Nanocrystal Photonic Films for Optical Coatings

Cellulose nanocrystals (CNCs) are powerful photonic building blocks for the fabrication of biosourced colored films. A combination of the advantages of self-assembled CNCs and multiple templating agents offers access to the development of novel physicochemical sensors, structural coatings, and optic devices. However, due to the inherent brittleness and water instability of CNC-derived materials, their further applications are widely questionable and restrictive. Here, a soft polymer of poly(vinyl alcohol) (PVA) was introduced into the rigid CNC system to balance molecular interactions, whereafter two hard/soft nanocomposites were fastened through a cross-linking reaction of glutaraldehyde (GA), resulting in a highly flexible, water-stable, and chiral nematic CNC composite film through an evaporation-induced self-assembly technique. For a 1.5 wt % GA-cross-linked 70 wt % CNC loading film, its treatment with harsh hydrophilic exposure (soaking in a strong acid, strong base, and seawater) and various organic solvents show exceptional solvent-resistant abilities. Furthermore, the film can even withstand a weight of 167 g cm^-2 without failure, which is a highly stiff and durable character. Importantly, the film remains a highly ordered chiral nematic organization, being able to act as a highly transparent substrate for selective reflection of left-handed circularly polarized light, preparing fully covered and patterned full-color coatings on various substrates. Our work paves the way for applications in low-cost, durable, and photonic cellulosic coatings.

Recent Advances in Functional Materials through Cellulose Nanofiber Templating

Advanced templating techniques have enabled delicate control of both nano- and microscale structures and have helped thrust functional materials into the forefront of society. Cellulose nanomaterials are derived from natural polymers and show promise as a templating source for advanced materials. Use of cellulose nanomaterials in templating combines nanoscale property control with sustainability, an attribute often lacking in other templating techniques. Use of cellulose nanofibers for templating has shown great promise in recent years, but previous reviews on cellulose nanomaterial templating techniques have not provided extensive analysis of cellulose nanofiber templating. Cellulose nanofibers display several unique properties, including mechanical strength, porosity, high water retention, high surface functionality, and an entangled fibrous network, all of which can dictate distinctive aspects in the final templated materials. Many applications exploit the unique aspects of templating with cellulose nanofibers that help control the final properties of the material, including, but not limited to, applications in catalysis, batteries, supercapacitors, electrodes, building materials, biomaterials, and membranes. A detailed analysis on the use of cellulose nanofibers templating is provided, addressing specifically how careful selection of templating mechanisms and methodologies, combined toward goal applications, can be used to directly benefit chosen applications in advanced functional materials.

Wettability-Controlled Directional Actuating Strategy Based on Bilayer Photonic Crystals

Although the water-triggered bending behavior of bilayer films has been a wide concerned, there are few reports on wettability-controlled directional actuators with visible color changes. Using photonic crystals as carriers, bilayer directional bending structural color actuators were prepared based on the hydrophilic difference. Top inverse opal with strong hydrophilicity can promote water penetration and strengthen the effect of swelling. While, bottom inverse opal with weak hydrophilicity can inhibit water penetration and weaken the effect of swelling. When the bilayer structure is immersed in water, its wettability differences will produce different optical responses for visualization and will bring different swelling performances, resulting in directional bending. Infiltration differences are visualized as structural color red shifts or transparency. The mechanism of the design involves optical diffractions in the fabricated periodic nanostructures, differences in the surface wettability and swelling rate, uses the infiltration and capillary evaporation of water to realize the spectral diversity of reflectance, and the enhancement of bending by gradient infiltration. This work deeply analyzes the improvement of the photonic crystal structure on the optical and bending performance of the wettability-controlled actuator, provides a basic model for the design of bionic components, and opens an idea for the combination of bilayer photonic crystals and actuators.

Recent advances in self-assemblies and sensing applications of colloidal photonic crystals

Colloidal photonic crystals (PCs), consisting of highly ordered monodisperse nanoparticles, have been carried out a great deal of research in recent decades due to the attributes of readable signal, easy modification and low cost. With these unique features, colloidal PCs have also gradually become a focus of candidates applied in sensing fields. In this review, an overview of recent advances in colloidal PCs including self-assemblies and sensing applications is illustrated. With respect to the development in self-assemblies of colloidal PCs, the review concentrates on the summary of responsive mechanisms, detection methods, responsive materials, unit cells and fabrication methods. In terms of advances in sensing application of colloidal PCs, various types of sensors are summarized based on the kinds and applications of target analytes. Furthermore, the current limitations and potential future directions of colloidal PCs in self-assemblies and sensing areas are also discussed.

Biodegradable Laser Arrays Self-Assembled from Plant Resources

The transition toward future sustainable societies largely depends on disruptive innovations in biobased materials to substitute nonsustainable advanced functional materials. In the field of optics, advanced devices (e.g., lasers or metamaterial devices) are typically manufactured using top-down engineering and synthetic materials. This work breaks with such concepts and switchable lasers self-assembled from plant-based cellulose nanocrystals and fluorescent polymers at room temperature and from water are shown. Controlled structure formation allows laser-grade cholesteric photonic bandgap materials, in which the photonic bandgap is matched to the fluorescence emission to function as an efficient resonator for low threshold multimode lasing. The lasers can be switched on and off using humidity, and can be printed into pixelated arrays. Additionally, the materials exhibit stiffness above typical thermoplastic polymers and biodegradability in soil. The concept showcases that highly advanced functions can be encoded into biobased materials, and opens the design space for future sustainable optical devices of unprecedented function.

Cellulose Nanocrystal and Water-Soluble Cellulose Derivative Based Electromechanical Bending Actuators

This study reports a versatile method for the development of cellulose nanocrystals (CNCs) and water-soluble cellulose derivatives (methyl cellulose (MC), hydroxypropyl cellulose (HPC), and sodium carboxymethyl cellulose (NaCMC)) films comprising the ionic liquid (IL) 2-hydroxy-ethyl-trimethylammonium dihydrogen phosphate ([Ch][DHP]) for actuator fabrication. The influence of the IL content on the morphology and physico–chemical properties of free-standing composite films was evaluated. Independently of the cellulose derivative, the ductility of the films increases upon [Ch][DHP] incorporation to yield elongation at break values of nearly 15%. An increase on the electrical conductivity as a result of the IL incorporation into cellulosic matrices is found. The actuator performance of composites was evaluated, NaCMC/[Ch][DHP] showing the maximum displacement along the x-axis of 9 mm at 8 Vpp. Based on the obtained high electromechanical actuation performance, together with their simple processability and renewable nature, the materials fabricated here represent a step forward in the development of sustainable soft actuators of high practical relevance.

Optical Recognition of Sulfamethoxazole by a Colored Chiral Nematic Imprinted Film

In this article, an alterable structural color in the reflected light of a chiral nematic imprinted film was fabricated. Bio-template nanocrystalline celluloses were applied as structural oriented templates. Selectivity of the sensor was endowed by the molecular imprinting process which applied sulfamethoxazoles (SMXs) as template molecules, urea and phenol as double functional monomers, and formaldehyde as cross-linkers. The sensor exhibited a chiral nematic blue mesoporous structure, which could selectively recognize SMXs on account of the abundant predetermined rebinding sites. Once SMXs were detected, the sensor showed a visible color variance from blue to yellow and the sensitive concentration range was from 3.9 × 10^-3 to 3.9 mmol L^-1. Both quantitative analyses, selective testing and recycling performance of the sensor were demonstrated. This optical response to SMXs can provide a portable, low-cost and easy-to-use strategy for the convenient detection of SMXs.

Photonic actuators with predefined shapes

Developing actuators with multi-responsibility, large deformation, and predefined shapes is critical for the application of actuators in the field of artificial intelligence. Herein, we report the preparation of a new type of unimorph actuators containing phenol-formaldelyde resin (PFR) and graphene oxide (GO) using the chiral nematic structure of cellulose nanocrystals (CNCs) as the template. The so-obtained PFR/GO films have a unimorph structure with an asymmetric distribution of GO across the film. They exhibit synchronous responses of both photonic properties and actuation to humidifying/dehumidifying. Moreover, PFR/GO films can be forged into desired shapes by aldehyde treatment, and thereby are able to produce complex movements. In addition, the objects with predetermined shapes show good shape recovery capability upon many wetting-drying cycles, especially through the treatment with formaldehyde. A mechanism model for shape predetermination by aldehyde treatment is suggested based on experimental details. By further designing the predetermined shapes and patterns, such PFR/GO actuators may hold great promise for smart actuation devices of highly complex movements.

Bioinspired Smart Moisture Actuators Based on Nanoscale Cellulose Materials and Porous, Hydrophilic EVOH Nanofibrous Membranes

Biomimetic actuators with rapid response speed, high sensitivity, and selectivity to external stimulus have found potential applications in smart switches, artificial muscles, and soft robots. The nanoscale structures of actuators enhance the exposed area to stimulus as well as enable versatile control of the actuation behaviors. Freestanding, flexible, and porous water-driven actuators with poly(vinyl alcohol- co-ethylene) (EVOH) nanofibers as the substrate and super hydrophilic nanoscale cellulose materials (cellulose nanofibers, cellulose nanocrystals, bacterial cellulose) as the active substance via uniform mixing or surface depositing were fabricated. The effects of the EVOH nanofiber substrate, the structures and concentrations of nanoscale cellulose materials, as well as the different environmental stimuli like humidity and temperature on the performance of actuators were studied. The water-driven actuation mechanism was proposed from the macroscopic and molecular aspects and the analysis of Gibbs free energy and mechanical energy. The actuator could bend to an angle of 180° and recovered less than 1 s for more than 100 circles without compromising properties when the environmental moisture changed. Furthermore, the multidimensional deformation behaviors of the water-stimulated actuators could also be well tuned by varying the orientations of the nanoscale materials. Additionally, the applications of the prepared actuator were demonstrated.

Compound droplets derived from a cholesteric suspension of cellulose nanocrystals

This study reports microfluidic generation of Janus droplets that consist of a liquid crystal component (a cholesteric aqueous suspension of cellulose nanocrystals, Ch-CNC) and a mineral oil (MO) component. The composition of the droplets was controlled by varying the relative flow rates of MO and Ch-CNC suspension. The shape of the Ch-CNC component of the droplets was changed from a truncated sphere to a hemisphere to a crescent moon. For these three Ch-CNC phase shapes, the Ch packing of the CNC pseudolayers was preserved, however the Ch pitch reduced, which was ascribed to the change in CNC orientation at the Ch-CNC/MO interface from perpendicular to parallel. The shape of the compound droplets was tuned from a dumbbell to a sphere by reducing interfacial tension between the Ch-CNC suspension and MO phases. Photopolymerization of the monomer mixture introduced in the Ch-CNC phase of the droplets and the removal of the sacrificial MO phase enabled the generation of Ch microgels. The results of this work can be used for exploring new applications of Janus colloids and the fabrication of programmable active soft matter.

Biopolymer nanofibrils: structure, modeling, preparation, and applications

Biopolymer nanofibrils exhibit exceptional mechanical properties with a unique combination of strength and toughness, while also presenting biological functions that interact with the surrounding environment. These features of biopolymer nanofibrils profit from their hierarchical structures that spun angstrom to hundreds of nanometer scales. To maintain these unique structural features and to directly utilize these natural supramolecular assemblies, a variety of new methods have been developed to produce biopolymer nanofibrils. In particular, cellulose nanofibrils (CNFs), chitin nanofibrils (ChNFs), silk nanofibrils (SNFs) and collagen nanofibrils (CoNFs), as the four most abundant biopolymer nanofibrils on earth, have been the focus of research in recent years due to their renewable features, wide availability, low-cost, biocompatibility, and biodegradability. A series of top-down and bottom-up strategies have been accessed to exfoliate and regenerate these nanofibrils for versatile advanced applications. In this review, we first summarize the structures of biopolymer nanofibrils in nature and outline their related computational models with the aim of disclosing fundamental structure-property relationships in biological materials. Then, we discuss the underlying methods used for the preparation of CNFs, ChNFs, SNF and CoNFs, and discuss emerging applications for these biopolymer nanofibrils.

Unraveling Mechanisms of Chiral Induction in Double-Helical Metallopolymers

Self-assembled helical polymers hold great promise as new functional materials, where helical handedness controls useful properties such as circularly polarized light emission or electron spin. The technique of subcomponent self-assembly can generate helical polymers from readily prepared monomers. Here we present three distinct strategies for chiral induction in double-helical metallopolymers prepared via subcomponent self-assembly: (1) employing an enantiopure monomer, (2) polymerization in a chiral solvent, (3) using an enantiopure initiating group. Kinetic and thermodynamic models were developed to describe the polymer growth mechanisms and quantify the strength of chiral induction, respectively. We found the degree of chiral induction to vary as a function of polymer length. Ordered, rod-like aggregates more than 70 nm long were also observed in the solid state. Our findings provide a basis to choose the most suitable method of chiral induction based on length, regiochemical, and stereochemical requirements, allowing stereochemical control to be established in easily accessible ways.

Twisted bio-nanorods serve as a template for constructing chiroptically active nanoflowers

Using biomacromolecule-based nanorods as a chiral source is a creative way to fabricate broadband chiroptically active nanoarchitectures. Herein, right-handedly twisted cellulose nanocrystal (CNC) nanorods, serving simultaneously as a chiral template and a building block, were combined with CuO for constructing composite nanoflowers that showed broadband chiroptical activity. Through calcination, the CuO/CNC nanoflowers can transform into chiral CuO with a flower-like architecture. The established preparation technology is expected to provide various novel broadband chiroptically active nanoarchitectures originating from CNCs and metal oxides.

Nanofibrils in nature and materials engineering

Nanofibrillar materials, such as cellulose, chitin and silk, are highly ordered architectures, formed through the self-assembly of repetitive building blocks into higher-order structures, which are stabilized by non-covalent interactions. This hierarchical building principle endows many biological materials with remarkable mechanical strength, anisotropy, flexibility and optical properties, such as structural colour. These features make nanofibrillar biopolymers interesting candidates for the development of strong, sustainable and biocompatible materials for environmental, energy, optical and biomedical applications. However, recreating their architecture is challenging from an engineering perspective. Rational design approaches, applying a combination of theoretical and experimental protocols, have enabled the design of biopolymer-based materials through mimicking nature's multiscale assembly approach. In this Review, we summarize hierarchical design strategies of cellulose, silk and chitin, focusing on nanoconfinement, fibrillar orientation and alignment in 2D and 3D structures. These multiscale architectures are discussed in the context of mechanical and optical properties, and different fabrication strategies for the manufacturing of biopolymer nanofibril-based materials are investigated. We highlight the contribution of rational material design strategies to the development of mechanically anisotropic and responsive materials and examine the future of the material-by-design paradigm.

Aerogel materials with periodic structures imprinted with cellulose nanocrystals

Novel aerogel materials with periodic structures derived from chiral nematic liquid crystalline cellulose nanocrystals (CNCs) are reported. The liquid crystalline structure of phase-separated CNCs is locked by a simple solvent exchange method or silica condensation. Both cellulose and silica/cellulose aerogel materials were obtained after critical point drying, and subsequent calcination of the silica/cellulose composite afforded a silica aerogel with periodic order. Gas adsorption and electron microscopy studies revealed that these materials have high surface areas and a unique chiral nematic structure imparted from the helicoidal CNC template. This is a new, scalable approach to aerogel materials with highly anisotropic structures. The high porosity and periodic, chiral features of these new materials may make them suitable for applications that require anisotropic properties or as hard templates for the construction of other ordered aerogels.

Bioinspired Coupling of Inorganic Layered Nanomaterials with Marine Polysaccharides for Efficient Aqueous Exfoliation and Smart Actuating Hybrids

WS₂ and marine alginate are perfectly coupled to ensure scalable production of exfoliated WS₂ with unprecedented efficiency, further providing super mechanical properties and the photothermal effect to their composites. Combined with the water-intake and cation-binding capabilities of alginate, biomimetic soft devices are designed with stimuli-responsiveness and actuating properties, capable of serving as a photo-driven motor, a walking robot, and a gripper.

Functionalization of cellulose nanocrystals for advanced applications

Replacing the widespread use of petroleum-derived non-biodegradable materials with green and sustainable materials is a pressing challenge that is gaining increasing attention by the scientific community. One such system is cellulose nanocrystal (CNC) derived from acid hydrolysis of cellulosic materials, such as plants, tunicates and agriculture biomass. The utilization of colloidal CNCs can aid in the reduction of carbon dioxide that is responsible for global warming and climate change. CNCs are excellent candidates for the design and development of functional nanomaterials in many applications due to several attractive features, such as high surface area, hydroxyl groups for functionalization, colloidal stability, low toxicity, chirality and mechanical strength. Several large scale manufacturing facilities have been commissioned to produce CNCs of up to 1000kg/day, and this has generated increasing interests in both academic and industrial laboratories. In this feature article, we will describe the recent development of functionalized cellulose nanocrystals for several important applications in ours and other laboratories. We will highlight some challenges and offer perspectives on the potentials of these sustainable nanomaterials.

Flexible Photonic Cellulose Nanocrystal Films

The fabrication of self-assembled cellulose nanocrystal (CNC) films of tunable photonic and mechanical properties using a facile, green approach is demonstrated. The combination of tunable flexibility and iridescence can dramatically expand CNC coating and film barrier capabilities for paints and coating applications, sustainable consumer packaging products, as well as effective templates for photonic and optoelectronic materials and structures.

An autonomous actuator driven by fluctuations in ambient humidity

Devices that respond to negligibly small fluctuations in environmental conditions will be of great value for the realization of more sustainable, low-power-consumption actuators and electronic systems. Herein we report an unprecedented film actuator that seemingly operates autonomously, because it responds to the adsorption and desorption of a minute amount of water (several hundred nanograms per 10 mm(2)) possibly induced by fluctuations in the ambient humidity. The actuation is extremely rapid (50 ms for one curl) and can be repeated >10,000 times without deterioration. On heating or light irradiation, the film loses adsorbed water and bends quickly, so that it can jump vertically up to 10 mm from a surface or hit a glass bead. The film consists of a π-stacked carbon nitride polymer, formed by one-pot vapour-deposition polymerization of guanidinium carbonate, and is characterized by a tough, ultralightweight and highly anisotropic layered structure. An actuator partially protected against water adsorption is also shown to walk unidirectionally.

Recent advances in the biomimicry of structural colours

Nature has mastered the construction of nanostructures with well-defined macroscopic effects and purposes. Structural colouration is a visible consequence of the particular patterning of a reflecting surface with regular structures at submicron length scales. Structural colours usually appear bright, shiny, iridescent or with a metallic look, as a result of physical processes such as diffraction, interference, or scattering with a typically small dissipative loss. These features have recently attracted much research effort in materials science, chemistry, engineering and physics, in order to understand and produce structural colours. In these early stages of photonics, researchers facing an infinite array of possible colour-producing structures are heavily inspired by the elaborate architectures they find in nature. We review here the recent technological strategies employed to artificially mimic the structural colours found in nature, as well as some of their current and potential applications.

Nanocellulose, a tiny fiber with huge applications

Nanocellulose is of increasing interest for a range of applications relevant to the fields of material science and biomedical engineering due to its renewable nature, anisotropic shape, excellent mechanical properties, good biocompatibility, tailorable surface chemistry, and interesting optical properties. We discuss the main areas of nanocellulose research: photonics, films and foams, surface modifications, nanocomposites, and medical devices. These tiny nanocellulose fibers have huge potential in many applications, from flexible optoelectronics to scaffolds for tissue regeneration. We hope to impart the readers with some of the excitement that currently surrounds nanocellulose research, which arises from the green nature of the particles, their fascinating physical and chemical properties, and the diversity of applications that can be impacted by this material.

An Electrolyte-Free Conducting Polymer Actuator that Displays Electrothermal Bending and Flapping Wing Motions under a Magnetic Field

Electroactive materials that change shape in response to electrical stimulation can serve as actuators. Electroactive actuators of this type have great utility in a variety of technologies, including biomimetic artificial muscles, robotics, and sensors. Electroactive actuators developed to date often suffer from problems associated with the need to use electrolytes, slow response times, high driving voltages, and short cycle lifetimes. Herein, we report an electrolyte-free, single component, polymer electroactive actuator, which has a fast response time, high durability, and requires a low driving voltage (<5 V). The process employed for production of this material involves wet-spinning of a preorganized camphorsulfonic acid (CSA)-doped polyaniline (PANI) gel, which generates long, flexible, and conductive (∼270 S/cm) microfibers. Reversible bending motions take place upon application of an alternating current (AC) to the PANI polymer. This motion, promoted by a significantly low driving voltage (<0.5 V) in the presence of an external magnetic field, has a very large swinging speed (9000 swings/min) that lies in the range of those of flies and bees (1000-15000 swings/min) and is fatigue-resistant (>1000000 cycles).

Synergistic action of thermoresponsive and hygroresponsive elements elicits rapid and directional response of a bilayer actuator

A bilayer actuator composed of thermoresponsive and thermo/hygroresponsive elements is developed, which undergoes fast, directional and autonomous curling with a speed of up to 0.7 m s⁻¹and recovers its shape by hydration.

Optically tunable chiral nematic mesoporous cellulose films

Demand for sustainable functional materials has never been larger. The introduction of functionality into pure cellulose might be one step forward in this field as it is one of the most abundant natural biopolymers. In this paper, we demonstrate a straightforward and scalable way to produce iridescent, mesoporous cellulose membranes with tunable colors and porosity. Concomitant assembly of cellulose nanocrystals (CNCs) and condensation of silica precursors results in CNC-silica composites with chiral nematic structures and tunable optical properties. Removal of the stabilizing silica matrix by alkaline or acid treatment gives access to novel chiral nematic mesoporous cellulose (CNMC) films. Importantly, the optical properties and the mesoporosity can be controlled by either varying the silica-to-CNC ratio, or by varying the substrate used during the evaporation-induced self-assembly process. In order to introduce additional functionality, CNMC has been used to stabilize gold nanoparticles with three different concentrations by wet impregnation. These materials are stable in water and can potentially function in sensors, tissue engineering or functional membranes.

Photonic patterns printed in chiral nematic mesoporous resins

Chiral nematic mesoporous phenol-formaldehyde resins, which were prepared using cellulose nanocrystals as a template, can be used as a substrate to produce latent photonic images. These resins undergo swelling, which changes their reflected color. By writing on the films with chemical inks, the density of methylol groups in the resin changes, subsequently affecting their degree of swelling and, consequently, their color. Writing on the films gives latent images that are revealed only upon swelling of the films. Using inkjet printing, it is possible to make higher resolution photonic patterns both as text and images that can be visualized by swelling and erased by drying. This novel approach to printing photonic patterns in resin films may be applied to anti-counterfeit tags, signage, and decorative applications.