Graphene-Based Materials for Lithium-Ion Hybrid Supercapacitors

Unraveling the energy storage mechanism in graphene-based nonaqueous electrochemical capacitors by gap-enhanced Raman spectroscopy

Graphene has been extensively utilized as an electrode material for nonaqueous electrochemical capacitors. However, a comprehensive understanding of the charging mechanism and ion arrangement at the graphene/electrolyte interface remain elusive. Herein, a gap-enhanced Raman spectroscopic strategy is designed to characterize the dynamic interfacial process of graphene with an adjustable number of layers, which is based on synergistic enhancement of localized surface plasmons from shell-isolated nanoparticles and a metal substrate. By employing such a strategy combined with complementary characterization techniques, we study the potential-dependent configuration of adsorbed ions and capacitance curves for graphene based on the number of layers. As the number of layers increases, the properties of graphene transform from a metalloid nature to graphite-like behavior. The charging mechanism shifts from co-ion desorption in single-layer graphene to ion exchange domination in few-layer graphene. The increase in area specific capacitance from 64 to 145 µF cm-2 is attributed to the influence on ion packing, thereby impacting the electrochemical performance. Furthermore, the potential-dependent coordination structure of lithium bis(fluorosulfonyl) imide in tetraglyme ([Li(G4)][FSI]) at graphene/electrolyte interface is revealed. This work adds to the understanding of graphene interfaces with distinct properties, offering insights for optimization of electrochemical capacitors.

Solution-Based Deep Prelithiation for Lithium-Ion Capacitors with High Energy Density

Lithium-ion capacitors (LICs) exhibit superior power density and cyclability compared to lithium-ion batteries. However, the low initial Coulombic efficiency (ICE) of amorphous carbon anodes (e.g., hard carbon (HC) and soft carbon (SC)) limits the energy density of LICs by underutilizing cathode capacity. Here, a solution-based deep prelithiation strategy for carbon anodes is applied using a contact-ion pair dominant solution, offering high energy density based on a systematic electrode balancing based on the cathode capacity increased beyond the original theoretical limit. Increasing the anode ICE to 150% over 100%, the activated carbon (AC) capacity is doubled by activating Li+ cation storage, which unleashes rocking-chair LIC operation alongside the dual-ion-storage mechanism. The increased AC capacity results in an energy density of 106.6 Wh kg-1 AC+SC, equivalent to 281% of that of LICs without prelithiation. Moreover, this process lowers the cathode-anode mass ratio, reducing the cell thickness by 67% without compromising the cell capacity. This solution-based deep chemical prelithiation promises high-energy LICs based on transition metal-free, earth-abundant active materials to meet the practical demands of power-intensive applications.

High-energy-density zinc ion capacitors based on 3D porous free-standing defect-reduced graphene oxide hydrogel cathodes

Zinc ion capacitors (ZICs) have shown potential for breaking the energy density ceiling of traditional supercapacitors (SCs) via appropriate device design. Nevertheless, a significant challenge remains in advancing ZIC positive electrode materials with excellent conductivity, high specific capacitance, and reliable cycle stability. A highly attractive option for carbon-based electrode materials is reduced graphene oxide (RGO) due to its vast specific surface area, prominent porosity, and 3D cross-linked frame. However, the tight stacking of RGO sheets driven by van der Waals forces can restrict active sites, decrease specific capacitance, and elevate electrochemical impedance. To overcome these challenges, 3D defective RGO (DRGO) hydrogels were prepared by a metal Co cocatalytic gasification reaction. This method produced mesoporous defects on the surface of RGO hydrogels via a low-temperature hydrothermal self-assembly strategy. The surface of the layer has a wide and uniform distribution, which can offer abundant redox active sites, rich ion transfer channels, and fast reaction kinetics. In this work, 3D DRGO//Zn exhibited a wide operating window (0-1.8 V), high specific capacitance (189.39 F g-1 at 1 A g-1), outstanding energy density (85.23 W h kg-1 at 960.31 W kg-1; 52.36 W h kg-1 at 17454.87 W kg-1), and persistent cycling life (98.86% initial capacitance retention after 10 000 cycles at 10 A g-1). This study emphasizes the device design of ZIC and promising prospects of using 3D DRGO hydrogel as a feasible positive electrode for ZIC.

Metal Negatrode Supercapatteries: Advancements, Challenges, and Future Perspectives for High-Performance Energy Storage

Metal negatrode supercapattery (MNSC) is an emerging technology that combines the high energy storage capabilities of batteries with the high-power delivery of supercapacitors, thereby offering promising solutions for various applications, such as energy storage systems, electric vehicles, and portable electronics. This review article presents a comprehensive analysis of the potential of MNSCs as a prospective energy storage technology. MNSCs utilize a specific configuration in which the negatrode consists of a metal or metal-rich electrode, such as sodium, aluminum, potassium, or zinc, whereas the positrode functions as a supercapacitor electrode. The utilization of negatrodes with low electrochemical potential and high electrical conductivity is crucial for achieving high specific energy in energy storage devices, despite facing numerous challenges. The present study discusses the design and fabrication aspects of MNSCs, including the selection of appropriate metal negatrodes, electrolytes, and positrodes, alongside the fundamental operational mechanisms. Additionally, this review explores the challenges encountered in MNSCs and proposes solutions to enhance their performance, such as addressing dendrite formation and instability of metal electrodes.

New Class of High-Energy, High-Power Capacitive Devices Enabled by Stabilized Lithium Metal Anodes

Lithium-ion capacitors (LIC) combine the energy storage mechanisms of lithium-ion batteries and electric double layer capacitors (EDLC) and are supposed to promise the best of both worlds: high energy and power density combined with a long life. However, the lack of lithium cation sources in the carbon cathode demands the cumbersome step of prelithiation of the graphite anode, mainly by using sacrificial lithium metal, hindering the mass adoption of LICs. Here, in a conceptually new class of devices termed lithium metal capacitors (LMC), we replace the graphite anode with a lithium metal anode stabilized by a complex yet stable solid-electrolyte interface (SEI). Via a specialized formation process, the well-explored synergetic reaction between the LiNO3 additive and controlled amounts of polysulfides in an ether-based electrolyte stabilizes the SEI on the lithium metal electrode. Optimized devices at the coin cell level deliver 55 mAh g-1 at a fast 30C discharge rate and maintain 95% capacity after 8000 cycles. At the pouch-cell level, energy densities of 13 Wh kg-1 are readily achieved, indicating the transferability of the technology to practical scales. The LMC, a new class of capacitive device, eliminates the prelithiation process of the conventional LIC, allowing practical production at scale and offering exciting avenues for exploring versatile cathode chemistries on account of using a lithium metal anode.

Recent Progress of 2D Layered Materials in Water-in-Salt/Deep Eutectic Solvent-Based Liquid Electrolytes for Supercapacitors

Supercapacitors are candidates with the greatest potential for use in sustainable energy resources. Extensive research is being carried out to improve the performances of state-of-art supercapacitors to meet our increased energy demands because of huge technological innovations in various fields. The development of high-performing materials for supercapacitor components such as electrodes, electrolytes, current collectors, and separators is inevitable. To boost research in materials design and production toward supercapacitors, the up-to-date collection of recent advancements is necessary for the benefit of active researchers. This review summarizes the most recent developments of water-in-salt (WIS) and deep eutectic solvents (DES), which are considered significant electrolyte systems to advance the energy density of supercapacitors, with a focus on two-dimensional layered nanomaterials. It provides a comprehensive survey of 2D materials (graphene, MXenes, and transition-metal oxides/dichalcogenides/sulfides) employed in supercapacitors using WIS/DES electrolytes. The synthesis and characterization of various 2D materials along with their electrochemical performances in WIS and DES electrolyte systems are described. In addition, the challenges and opportunities for the next-generation supercapacitor devices are summarily discussed.

An In Situ Fabricated Graphene/Bipolar Polymer Hybrid Material Delivers Ultralong Cycle Life over 15 000 Cycles as a High-Performance Electrode Material

Organic electrode materials are promising for the future energy storage systems owing to their tunable structures, abundant resources, and environmental friendliness. Many advanced lithium-ion batteries with organic electrodes have been developed and show excellent performance. However, developing organic materials with overall superior performance still faces great challenges, such as low capacity, poor stability, inferior conductivity, and low utilization of active sites. To address these issues, a bipolar polymer (Fc-DAB) is designed and further polymerized in situ with three-dimensional graphene (3DG), offering a hybrid material (Fc-DAB@3DG) with a variety of merits. Fc-DAB possesses stable polymer backbone and multiple redox-active sites that can improve stability and capacity simultaneously. The embedded highly conductive 3DG network endows Fc-DAB@3DG with stable conductive framework, large surface area, and porous morphology all together, so the fast diffusion of ions/electrons can be achieved, leading to high utilization of active sites and enhanced electrochemical performance. As a result, Fc-DAB@3DG cathode delivers capacity of ≈260 mA h g^-1 at 25 mA g^-1 , ultra-long cycle life over 15 000 cycles at 2000 mA g^-1 with retention of 99.999% per cycle, and remarkable rate performance. The quasi-solid Li-metal battery and full cell fabricated using this material also exhibit superior electrochemical performance.

Study of Viscoelastic Properties of Graphene Foams Using Dynamic Mechanical Analysis and Coarse-Grained Molecular Dynamics Simulations

As a promising nano-porous material for energy dissipation, the viscoelastic properties of three-dimensional (3D) graphene foams (GrFs) are investigated by combining a dynamic mechanical analysis (DMA) and coarse-grained molecular dynamic (CGMD) simulations. The effects of the different factors, such as the density of the GrFs, temperature, loading frequency, oscillatory amplitude, the pre-strain on the storage and loss modulus of the GrFs as well as the micro-mechanical mechanisms are mainly focused upon. Not only the storage modulus but also the loss modulus are found to be independent of the temperature and the frequency. The storage modulus can be weakened slightly by bond-breaking with an increasing loading amplitude. Furthermore, the tensile/compressive pre-strain and density of the GrFs can be used to effectively tune the viscoelastic properties of the GrFs. These results should be helpful not only for understanding the mechanical mechanism of GrFs but also for optimal designs of advanced damping materials.

Carbon-Shielded Selenium-Rich Trimetallic Selenides as Advanced Electrode Material for Durable Li-Ion Batteries and Supercapacitors

In order to achieve a sustainable future, researchers must continue to research improved electrode materials. Considering the high electronic conductivity, versatile redox activity, and enhanced energy storage performance, nanostructures have been employed as a novel electrode material for high-performance lithium-ion batteries (LIBs) and supercapacitors. Herein, carbon-coated selenium-rich trimetallic selenide (Cu₂ NiSnSe₄ @C) nanoparticles (NPs) as an efficient electrode material in energy storage devices are prepared. The prepared core-shell Cu₂ NiSnSe₄ @C NPs electrode is employed as an anode material for LIBs, which demonstrated a high reversible specific capacity of 988.46 mA h g^-1 over 100 cycles at 0.1 A g^-1 with good rate capability. Additionally, the core-shell Cu₂ NiSnSe₄ @C NPs electrode exhibited an outstanding capacity of 202.5 mA h g^-1 at 5 A g^-1 even after 10 000 cycles. Exploiting the synergistic characteristics, the core-shell Cu₂ NiSnSe₄ @C NPs material is also investigated as a battery-type electrode for hybrid supercapacitors. The assembled hybrid supercapacitor with Cu₂ NiSnSe₄ @C NPs and activated carbon showed excellent rate capability including high power (5597.77 W kg^-1 ) and energy (64.26 Wh kg^-1 ) densities. Considering the simple synthesis and enhanced energy storage properties, carbon-coated selenium-rich trimetallic selenide can be used as a durable electrode material for practical energy storage devices.

Facile Synthesis and Optimization of CrOOH/rGO-Based Electrode Material for a Highly Efficient Supercapacitor Device

New electrode materials for supercapacitor devices are the primary focus of current research into energy-storage devices. Besides, exact control of the proportions of these new materials while forming electrodes for coin cell supercapacitor devices is very important for the large-scale manufacturing or at industrial scale. Here we report a facile synthesis of CrOOH with ascorbic acid and explore an exact composition with reduced graphene oxide to achieve a highly efficient electrode material for supercapacitor devices. The rGO is synthesized by modified Hummer's method followed by reduction with ascorbic acid, whereas ultrasmall CrOOH nanoparticles result via hydrothermal treatment of the reactants Cr(NO₃)₃, NaOH, and ascorbic acid at 120 °C for 12 h. The ultrasmall CrOOH nanoparticles show an amorphous phase with particle size range 3-10 nm and a calculated band gap of 3.28 eV. Six different composites are prepared by varying the proportion of CrOOH and rGO materials and further utilized as active electrode materials for fabrication of the coin cell supercapacitor devices. We report the highest specific capacitance for the 70% CrOOH and 30% rGO composite that exhibits a capacitance of 199.8 mF cm^-2 with a long cyclic stability up to the tested 10,000 charge/discharge cycles. The proposed supercapacitor device exhibits a high energy and power density of 8.26 Wh kg^-1 and 3756.9 W kg^-1, respectively, at Ragone Plot, showing the commercial viability of the device.

Advances of Carbon Materials for Dual-Carbon Lithium-Ion Capacitors: A Review

Lithium-ion capacitors (LICs) have drawn increasing attention, due to their appealing potential for bridging the performance gap between lithium-ion batteries and supercapacitors. Especially, dual-carbon lithium-ion capacitors (DC-LICs) are even more attractive because of the low cost, high conductivity, and tunable nanostructure/surface chemistry/composition, as well as excellent chemical/electrochemical stability of carbon materials. Based on the well-matched capacity and rate between the cathode and anode, DC-LICs show superior electrochemical performances over traditional LICs and are considered to be one of the most promising alternatives to the current energy storage devices. In particular, the mismatch between the cathode and anode could be further suppressed by applying carbon nanomaterials. Although great progresses of DC-LICs have been achieved, a comprehensive review about the advances of electrode materials is still absent. Herein, in this review, the progresses of traditional and nanosized carbons as cathode/anode materials for DC-LICs are systematically summarized, with an emphasis on their synthesis, structure, morphology, and electrochemical performances. Furthermore, an outlook is tentatively presented, aiming to develop advanced DC-LICs for commercial applications.

Metal-organic frameworks and their derivatives for metal-ion (Li, Na, K and Zn) hybrid capacitors

Metal-ion hybrid capacitors (MIHCs) hold particular promise for next-generation energy storage technologies, which bridge the gap between the high energy density of conventional batteries and the high power density and long lifespan of supercapacitors (SCs). However, the achieved electrochemical performance of available MIHCs is still far from practical requirements. This is primarily attributed to the mismatch in capacity and reaction kinetics between the cathode and anode. In this regard, metal-organic frameworks (MOFs) and their derivatives offer great opportunities for high-performance MIHCs due to their high specific surface area, high porosity, topological diversity, and designable functional sites. In this review, instead of simply enumerating, we critically summarize the recent progress of MOFs and their derivatives in MIHCs (Li, Na, K, and Zn), while emphasizing the relationship between the structure/composition and electrochemical performance. In addition, existing issues and some representative design strategies are highlighted to inspire breaking through existing limitations. Finally, a brief conclusion and outlook are presented, along with current challenges and future opportunities for MOFs and their derivatives in MIHCs.

Graphene: A Path-Breaking Discovery for Energy Storage and Sustainability

The global energy situation requires the efficient use of resources and the development of new materials and processes for meeting current energy demand. Traditional materials have been explored to large extent for use in energy saving and storage devices. Graphene, being a path-breaking discovery of the present era, has become one of the most-researched materials due to its fascinating properties, such as high tensile strength, half-integer quantum Hall effect and excellent electrical/thermal conductivity. This paper presents an in-depth review on the exploration of deploying diverse derivatives and morphologies of graphene in various energy-saving and environmentally friendly applications. Use of graphene in lubricants has resulted in improvements to anti-wear characteristics and reduced frictional losses. This comprehensive survey facilitates the researchers in selecting the appropriate graphene derivative(s) and their compatibility with various materials to fabricate high-performance composites for usage in solar cells, fuel cells, supercapacitor applications, rechargeable batteries and automotive sectors.

Intelligent Model for Power Cells State of Charge Forecasting in EV

In electric vehicles and mobile electronic devices, batteries are one of the most critical components. They work by using electrochemical reactions that have been thoroughly investigated to identify their behavior and characteristics at each operating point. One of the fascinating aspects of batteries is their complicated behavior. The type of power cell reviewed in this study is a Lithium Iron Phosphate LiFePO4 (LFP). The goal of this study is to develop an intelligent model that can forecast the power cell State of Charge (SOC). The dataset used to create the model comprises all the operating points measured from an actual system during a capacity confirmation test. Regression approaches based on Deep Learning (DL), such as Long Short-Term Memory networks (LSTM), were evaluated under different model configurations and forecasting horizons.

Stretchable sodium-ion capacitors based on coaxial CNT supported Na2Ti3O7 with high capacitance contribution

Stretchable sodium-ion capacitors (SSICs) are promising energy storage devices for wearable electronic devices, and the development bottleneck is the realization of stretchable battery-type electrodes with desirable electrochemical properties during dynamic deformation. Herein, we find that electrostatic modification of acidified carbon nanotubes with polyamines can introduce active sites and modulate the surface pH microenvironment, thereby developing a route to realize the in situ coaxial nanometerization of sodium titanate (nCNT@NTO). The nCNT@NTO anode material has a fast Na⁺ transport and the high capacitive contribution, which can deliver a high specific capacity (206.5 mA h g^-1 at 0.1 A g^-1) and high rate performance (maintain 51% capacity at 10 A g^-1), and the ideal cycle stability (∼93% capacity retention after 1000 cycles at 5 A g^-1). In addition, acrylate-rubber with high stickiness and stretchability are served as the elastic matrix both of the stretchable electrodes and quasi-solid-state electrolytes, which endows strong adhesion between electrodes and electrolytes. Thus, the accordingly assembled SSIC delivers high energy density of 8.8 mW h cm^-3 (at a power density of 0.024 W cm^-3), and excellent deformation stability (89% capacitance retention after 500 stretching cycles under 100% strain).

Impact of Full Prelithiation of Si-Based Anodes on the Rate and Cycle Performance of Li-Ion Capacitors

The impact of full prelithiation on the rate and cycle performance of a Si-based Li-ion capacitor (LIC) was investigated. Full prelithiation of the anode was achieved by assembling a half cell with a 2 µm-sized Si anode (0 V vs. Li/Li+) and Li metal. A three-electrode full cell (100% prelithiation) was assembled using an activated carbon (AC) cathode with a high specific surface area (3041 m2/g), fully prelithiated Si anode, and Li metal reference electrode. A three-electrode full cell (87% prelithiation) using a Si anode prelithiated with 87% Li ions was also assembled. Both cells displayed similar energy density levels at a lower power density (200 Wh/kg at ≤100 W/kg; based on the total mass of AC and Si). However, at a higher power density (1 kW/kg), the 100% prelithiation cell maintained a high energy density (180 Wh/kg), whereas that of the 87% prelithiation cell was significantly reduced (80 Wh/kg). During charge/discharge cycling at ~1 kW/kg, the energy density retention of the 100% prelithiation cell was higher than that of the 87% prelithiation cell. The larger irreversibility of the Si anode during the initial Li-ion uptake/release cycles confirmed that the simple full prelithiation process is essential for Si-based LIC cells.

Production of a hybrid capacitive storage device via hydrogen gas and carbon electrodes coupling

Conventional electric double-layer capacitors are energy storage devices with a high specific power and extended cycle life. However, the low energy content of this class of devices acts as a stumbling block to widespread adoption in the energy storage field. To circumvent the low-energy drawback of electric double-layer capacitors, here we report the assembly and testing of a hybrid device called electrocatalytic hydrogen gas capacitor containing a hydrogen gas negative electrode and a carbon-based positive electrode. This device operates using pH-universal aqueous electrolyte solutions (i.e., from 0 to 14) in a wide temperature range (i.e., from - 70 °C to 60 °C). In particular, we report specific energy and power of 45 Wh kg^-1 and 458 W kg^-1 (both values based on the electrodes' active materials mass), respectively, at 1 A g^-1 and 25 °C with 9 M H₃PO₄ electrolyte solution. The device also enables capacitance retention of 85% (final capacitance of about 114 F g^-1) after 100,000 cycles at 10 A g^-1 and 25 °C with 1 M phosphate buffer electrolyte solution.

A Comprehensive Review of Lithium-Ion Capacitor Technology: Theory, Development, Modeling, Thermal Management Systems, and Applications

This review paper aims to provide the background and literature review of a hybrid energy storage system (ESS) called a lithium-ion capacitor (LiC). Since the LiC structure is formed based on the anode of lithium-ion batteries (LiB) and cathode of electric double-layer capacitors (EDLCs), a short overview of LiBs and EDLCs is presented following the motivation of hybrid ESSs. Then, the used materials in LiC technology are elaborated. Later, a discussion regarding the current knowledge and recent development related to electro-thermal and lifetime modeling for the LiCs is given. As the performance and lifetime of LiCs highly depends on the operating temperature, heat transfer modeling and heat generation mechanisms of the LiC technology have been introduced, and the published papers considering the thermal management of LiCs have been listed and discussed. In the last section, the applications of LiCs have been elaborated.

A Review on Recent Advances for Boosting Initial Coulombic Efficiency of Silicon Anodic Lithium Ion batteries

Rechargeable silicon anode lithium ion batteries (SLIBs) have attracted tremendous attention because of their merits, including a high theoretical capacity, low working potential, and abundant natural sources. The past decade has witnessed significant developments in terms of extending the lifespan and maintaining high capacities of SLIBs. However, the detrimental issue of low initial Coulombic efficiency (ICE) toward SLIBs is causing more and more attention in recent years because ICE value is a core index in full battery design that profoundly determines the utilization of active materials and the weight of an assembled battery. Herein, a comprehensive review is presented of recent advances in solutions for improving ICE of SLIBs. From design perspectives, the strategies for boosting ICE of silicon anodes are systematically categorized into several aspects covering structure regulation, prelithiation, interfacial design, binder design, and electrolyte additives. The merits and challenges of various approaches are highlighted and discussed in detail, which provides valuable insights into the rational design and development of state-of-the-art techniques to deal with the deteriorative issue of low ICE of SLIBs. Furthermore, conclusions and future promising research prospects for lifting ICE of SLIBs are proposed at the end of the review.

Crystal Facet and Architecture Engineering of Metal Oxide Nanonetwork Anodes for High-Performance Potassium Ion Batteries and Hybrid Capacitors

Metal oxides are considered as prospective dual-functional anode candidates for potassium ion batteries (PIBs) and hybrid capacitors (PIHCs) because of their abundance and high theoretic gravimetric capacity; however, due to the inherent insulating property of wide band gaps and deficient ion-transport kinetics, metal oxide anodes exhibit poor K⁺ electrochemical performance. In this work, we report crystal facet and architecture engineering of metal oxides to achieve significantly enhanced K⁺ storage performance. A bismuth antimonate (BiSbO₄) nanonetwork with an architecture of perpendicularly crossed single crystal nanorods of majorly exposed (001) planes are synthesized via CTAB-mediated growth. (001) is found to be the preferential surface diffusion path for superior adsorption and K⁺ transport, and in addition, the interconnected nanorods gives rise to a robust matrix to enhance electrical conductivity and ion transport, as well as buffering dramatic volume change during insertion/extraction of K⁺. Thanks to the synergistic effect of facet and structural engineering of BiSbO₄ electrodes, a stable dual conversion-alloying mechanism based on reversible six-electron transfer per formula unit of ternary metal oxides is realized, proceeding by reversible coexistence of potassium peroxide conversion reactions (KO₂↔K₂O) and Bi_xSb_y alloying reactions (BiSb ↔ KBiSb ↔ K₃BiSb). As a result, BiSbO₄ nanonetwork anodes show outstanding potassium ion storage in terms of capacity, cycling life, and rate capability. Finally, the implementation of a BiSbO₄ nanonetwork anode in the state-of-the-art full cell configuration of both PIBs and PIHCs shows satisfactory performance in a Ragone plot that sheds light on their practical applications for a wide range of K⁺-based energy storage devices. We believe this study will propose a promising avenue to design advanced hierarchical nanostructures of ternary or binary conversion-type materials for PIBs, PIHCs, or even for extensive energy storage.

Hierarchically porous activated carbons prepared via a dissipative process: a high-capacity cathode for Li-ion capacitors

Activated carbons with high specific surface area (SSA) and well-modulated pore structure are highly desirable for achieving high-performance capacitive energy storage. Herein, hierarchically porous activated carbons (PACs) are synthesized by a tableting-activation method. The quick release of high-pressure gaseous products from the inside of the tablets can be regarded as a dissipative process, which leads to the formation of well-ordered high density meso- or macropores in the resulting material. The porous structure of the PACs has been modulated by adjusting the dissipative process parameters, such as the tableting pressure and tablet thickness. As a result, the optimal PAC (PAC-10) possesses an ultrahigh SSA (up to 3211 m² g^-1) and a well-developed hierarchical porous structure, which leads to an excellent capacitive energy-storage performance both in an aqueous electrolyte supercapacitor system and a Li ion capacitor (LIC) system. In particular, as a cathode for LICs, PAC-10 exhibits an extremely high specific capacity of 251 mA h g^-1 at 0.5 A g^-1 and still retains 158 mA h g^-1 at a high rate of 15 A g^-1.

A free-standing VN/MXene composite anode for high-performance Li-ion hybrid capacitors

The Li-ion hybrid capacitor (LIHC) is considered as a promising candidate for electrochemical energy storage owing to the high energy and power density. However, the sluggish anodic reaction kinetics and high reaction voltage greatly hinder the overall performance of LIHCs. Herein, a free-standing VN/MXene composite anode with high specific capacity and low reaction voltage was prepared by a simple vacuum filtration method. The obtained VN/MXene composite anode shows a high discharge specific capacity of 501.7 mA h g⁻¹ at 0.1 A g⁻¹ and excellent rate capability (191.8 mA h g⁻¹ at 5 A g⁻¹), as well as much extended cycling stability (1500 cycles at 2 A g⁻¹). When combined with an egg white-derived activated carbon (E-AC) cathode, the assembled LIHC delivers a high specific capacity of 59.1 F g⁻¹ and a high energy density of 129.3 W h kg⁻¹ with a power density of 449.7 W kg⁻¹. Even at a high current density of 5 A g⁻¹, the LIHC still maintains an exciting energy density of 42.81 W h kg⁻¹ at 11 249 W kg⁻¹. Meanwhile, the cycling life can be extended to 5000 cycles with a high capacity retention of 98% at 1 A g⁻¹. We believe that this work opens up new possibilities for developing advanced free-standing MXene-based electrodes for Li-ion storage.

The Li-ion hybrid capacitor (LIHC) is considered as a promising candidate for electrochemical energy storage owing to the high energy and power density.

A template oriented one-dimensional Schiff-base polymer: towards flexible nitrogen-enriched carbonaceous electrodes with ultrahigh electrochemical capacity

Lithium-ion capacitors (LICs) have attracted much attention considering their efficient combination of high energy density and high-power density. However, to meet the increasing requirements of energy storage devices and the flexible portable electronic equipment, it is still challenging to develop flexible LIC anodes with high specific capacity and excellent rate capability. Herein, we propose a delicate bottom-up strategy to integrate unique Schiff-base-type polymers into desirable one-dimensional (1D) polymeric structures. A secondary-polymerization-induced template-oriented synthesis approach realizes the 1D integration of Schiff-base porous organic polymers with appealing characteristics of a high nitrogen-doping level and developed pore channels, and a further thermalization yields flexible nitrogen-enriched carbon nanofibers with high specific capacity and fast ion transport. Remarkably, when used as the flexible anode in LICs, the NPCNF//AC LIC demonstrates a high energy density of 154 W h kg^-1 at 500 W kg^-1 and a high power density of 12.5 kW kg^-1 at 104 W h kg^-1. This work may provide a new scenario for synthesizing 1D Schiff-base-type polymer derived nitrogen-enriched carbonaceous materials towards promising free-standing anodes in LICs.

Graphene-Based Cathode Materials for Lithium-Ion Capacitors: A Review

Lithium-ion capacitors (LICs) are attracting increasing attention because of their potential to bridge the electrochemical performance gap between batteries and supercapacitors. However, the commercial application of current LICs is still impeded by their inferior energy density, which is mainly due to the low capacity of the cathode. Therefore, tremendous efforts have been made in developing novel cathode materials with high capacity and excellent rate capability. Graphene-based nanomaterials have been recognized as one of the most promising cathodes for LICs due to their unique properties, and exciting progress has been achieved. Herein, in this review, the recent advances of graphene-based cathode materials for LICs are systematically summarized. Especially, the synthesis method, structure characterization and electrochemical performance of various graphene-based cathodes are comprehensively discussed and compared. Furthermore, their merits and limitations are also emphasized. Finally, a summary and outlook are presented to highlight some challenges of graphene-based cathode materials in the future applications of LICs.

A Comprehensive Review of Graphene-Based Anode Materials for Lithium-ion Capacitors

Lithium-ion capacitors (LICs) are considered to be one of the most promising energy storage devices which have the potential of integrating high energy of lithium-ion batteries and high power and long cycling life of supercapacitors into one system. However, the current LICs could only provide high power density at the cost of low energy density due to the sluggish Li+ diffusion and/or low electrical conductivity of the anode materials. Moreover, the serious capacity and kinetics imbalances between anode and cathode result in not only inferior rate performance but also unsatisfactory cycling stability. Therefore, designing high-power and structure stable anode materials is of great significance for practical LICs. Under this circumstance, graphene-based materials have been intensively explored as anodes in LICs due to their unique structure and outstanding electrochemical properties and attractive achievements have been made. In this review, the recent progresses of graphene-based anode materials for LICs are systematically summarized. Their synthesis procedure, structure and electrochemical performance are discussed with a special focus on the role of graphene. Finally, the outlook and remaining challenges are presented with some constructive guidelines for future research.

Mechanical Properties and Deformation Mechanisms of Graphene Foams with Bi-Modal Sheet Thickness by Coarse-Grained Molecular Dynamics Simulations

Graphene foams (GrFs) have been widely used as structural and/or functional materials in many practical applications. They are always assembled by thin and thick graphene sheets with multiple thicknesses; however, the effect of this basic structural feature has been poorly understood by existing theoretical models. Here, we propose a coarse-grained bi-modal GrF model composed of a mixture of 1-layer flexible and 8-layer stiff sheets to study the mechanical properties and deformation mechanisms based on the mesoscopic model of graphene sheets (Model. Simul. Mater. Sci. Eng. 2011, 19, 54003). It is found that the modulus increases almost linearly with an increased proportion of 8-layer sheets, which is well explained by the mixture rule; the strength decreases first and reaches the minimum value at a critical proportion of stiff sheets ~30%, which is well explained by the analysis of structural connectivity and deformation energy of bi-modal GrFs. Furthermore, high-stress regions are mainly dispersed in thick sheets, while large-strain areas mainly locate in thin ones. Both of them have a highly uneven distribution in GrFs due to the intrinsic heterogeneity in both structures and the mechanical properties of sheets. Moreover, the elastic recovery ability of GrFs can be enhanced by adding more thick sheets. These results should be helpful for us to understand and further guide the design of advanced GrF-based materials.

Strain Hardening in Graphene Foams under Shear

Strain hardening is an important issue for the design and application of materials. The strain hardening of graphene foams has been widely observed but poorly understood. Here, by adopting the coarse-grained molecular dynamics method, we systematically investigated the microscopic mechanism and influencing factors of strain hardening and related mechanical properties of graphene foams under shear loading. We found that the strain hardening is induced by cumulative nonlocalized bond-breakings and rearrangements of microstructures. Furthermore, it can be effectively tuned by the number of graphene layers and cross-link densities, i.e., the strain hardening would emerge at a smaller shear strain for the graphene foams with thicker sheets and/or more cross-links. In addition, the shear stiffness G of graphene foams increases linearly with the cross-link density and exponentially with the number of graphene layers n by G ∼ n 1.95. These findings not only improve our understanding of the promising bulk materials but also pave the way for optimizing structural design in wide applications based on their mechanical properties.

Interlayer Structure Engineering of MXene-Based Capacitor-Type Electrode for Hybrid Micro-Supercapacitor toward Battery-Level Energy Density

Micro-supercapacitors are notorious for their low energy densities compared to micro-batteries. While MXenes have been identified as promising capacitor-type electrode materials for alternative zinc-ion hybrid micro-supercapacitors (ZHMSCs) with higher energy density, their tightly spaced layered structure renders multivalent zinc-ions with large radii intercalation inefficient. Herein, through insertion of 1D core-shell conductive BC@PPy nanofibers between MXene nanosheets, an interlayer structure engineering technique for MXene/BC@PPy capacitor-type electrodes towards ZHMSCs is presented. Owing to simultaneously achieving two objectives: (i) widening the interlayer space and (ii) providing conductive connections between the loose MXene layers, enabled by the conductive BC@PPy nanospacer, the approach effectively enhances both ion and electron transport within the layered MXene structure, significantly increasing the areal capacitance of the MXene/BC@PPy film electrode to 388 mF cm-2 , which is a 10-fold improvement from the pure MXene film electrode. Pairing with CNTs/MnO2 battery-type electrodes, the obtained ZHMSCs exhibit an areal energy density up to 145.4 μWh cm-2 with an outstanding 95.8% capacity retention after 25000 cycles, which is the highest among recently reported MXene-based MSCs and approaches the level of micro-batteries. The interlayer structure engineering demonstrated in the MXene-based capacitor-type electrode provides a rational means to achieve battery-levelenergy density in the ZHMSCs.

Rational synthesis of a hierarchical Mo2C/C nanosheet composite with enhanced lithium storage properties

Transition metal carbides have been studied extensively as anode materials for lithium-ion batteries (LIBs), but they suffer from sluggish lithium reaction kinetics and large volume expansion. Herein, a hierarchical Mo2C/C nanosheet composite has been synthesized through a rational pyrolysis strategy, and evaluated as an anode material with enhanced lithium storage properties for LIBs. In the hierarchical Mo2C/C nanosheet composite, large numbers of Mo2C nanosheets with a thickness of 40-100 nm are uniformly anchored onto/into carbon nanosheet matrices. This unique hierarchical architecture can provide favorable ion and electron transport pathways and alleviate the volume change of Mo2C during cycling. As a consequence, the hierarchical Mo2C/C nanosheet composite exhibits high-performance lithium storage with a reversible capacity of up to 868.6 mA h g-1 after 300 cycles at a current density of 0.2 A g-1, as well as a high rate capacity of 541.8 mA h g-1 even at 5.0 A g-1. More importantly, this hierarchical composite demonstrates impressive cyclability with a capacity retention efficiency of 122.1% over 5000 successive cycles at 5.0 A g-1, which surpasses the cycling properties of most other Mo2C-based materials reported to date.

High-Performance Lithium-Ion Capacitors Based on Porosity-Regulated Zirconium Metal-Organic Frameworks

Comprised of a battery anode and a supercapacitor cathode, hybrid lithium-ion capacitors (HLICs) are found to be an effective solution to realize both high power density and high energy density at the same time. Organic-inorganic hybrid materials with well-organized framework guided by the reticular chemistry are one of the promising anode materials for HLICs because of rich active sites and ordered porosity. Herein, metal-organic framework consisting of Zr⁴⁺ metal ions and tetrathiafulvalene-based ligands (Zr-MOF) is proposed as the pseudocapacitive anode of HLICs. The Zr-MOF possesses high stability, high crystallinity, and multiple meso-microporous channels favorable for ion transport. The as-prepared Zr-MOF||activated carbon HLICs present high energy density (122.5 Wh kg^-1 ), high power density (12.5 kW kg^-1 ), and stable cycling performance (86% capacity retention after 1000 cycles at 2000 mA g^-1 ) within the operating voltage range of 1.0-4.0 V. The results expand the direct application of MOF for bridging the performance gap between batteries and supercapacitors.

Graphene-Based Two-Dimensional Mesoporous Materials: Synthesis and Electrochemical Energy Storage Applications

Graphene (G)-based two dimensional (2D) mesoporous materials combine the advantages of G, ultrathin 2D morphology, and mesoporous structures, greatly contributing to the improvement of power and energy densities of energy storage devices. Despite considerable research progress made in the past decade, a complete overview of G-based 2D mesoporous materials has not yet been provided. In this review, we summarize the synthesis strategies for G-based 2D mesoporous materials and their applications in supercapacitors (SCs) and lithium-ion batteries (LIBs). The general aspect of synthesis procedures and underlying mechanisms are discussed in detail. The structural and compositional advantages of G-based 2D mesoporous materials as electrodes for SCs and LIBs are highlighted. We provide our perspective on the opportunities and challenges for development of G-based 2D mesoporous materials. Therefore, we believe that this review will offer fruitful guidance for fabricating G-based 2D mesoporous materials as well as the other types of 2D heterostructures for electrochemical energy storage applications.

Progress and Prospects on the Fabrication of Graphene-Based Nanostructures for Energy Storage, Energy Conversion and Biomedical Applications

Graphene, a two-dimensional (2D) layered material has attracted much attention from the scientific community due to its exceptional electrical, thermal, mechanical, biological and optical properties. Hence, numerous applications utilizing graphene-based materials could be conceived in next-generation electronics, chemical and biological sensing, energy conversion and storage, and beyond. The interaction between graphene surfaces with other materials plays a vital role in influencing its properties than other bulk materials. In this review, we outline the recent progress in the production of graphene and related 2D materials, and their uses in energy conversion (solar cells, fuel cells), energy storage (batteries, supercapacitors) and biomedical applications.

Lithium-Ion Capacitors: A Review of Design and Active Materials

Lithium-ion capacitors (LICs) have gained significant attention in recent years for their increased energy density without altering their power density. LICs achieve higher capacitance than traditional supercapacitors due to their hybrid battery electrode and subsequent higher voltage. This is due to the asymmetric action of LICs, which serves as an enhancer of traditional supercapacitors. This culminates in the potential for pollution-free, long-lasting, and efficient energy-storing that is required to realise a renewable energy future. This review article offers an analysis of recent progress in the production of LIC electrode active materials, requirements and performance. In-situ hybridisation and ex-situ recombination of composite materials comprising a wide variety of active constituents is also addressed. The possible challenges and opportunities for future research based on LICs in energy applications are also discussed.

S, O dual-doped porous carbon derived from activation of waste papers as electrodes for high performance lithium ion capacitors

To circumvent the imbalances of electrochemical kinetics and charge-storage capacity between Li⁺ ion battery anodes and capacitive cathodes in lithium-ion capacitors (LICs), dual carbon based LICs are constructed and investigated extensively. Herein, S, O dual-doped 3D net-like porous carbon (S-NPC) is prepared using waste paper as the carbon source through a facile solvothermal treatment and chemical activation. Benefiting from the combination effect of the rich S,O-doping (about 2.1 at% for S, and 9.0 at% for O), high surface area (2262 m² g^-1) and interconnected porous network structure, the S-NPC-40 material exhibits excellent electrochemical performance as both cathode material and anode material for LICs. S, O doping not only increases the pseudocapacity but also improves the electronic conductivity, which is beneficial to reduce the mismatch between the two electrodes. The S-NPC-40//S-NPC-40 LIC delivers high energy densities of 176.1 and 77.8 W h kg^-1 at power densities of 400 and 20 kW kg^-1, respectively, as well as superior cycling stability with 82% capacitance retention after 20 000 cycles at 2 A g^-1. This research provides an efficient method to convert waste paper to porous carbon electrode materials for high performance LIC devices.

Pseudocapacitance multiporous vanadyl phosphate/graphene thin film electrode for high performance electrochemical capacitors

Supercapacitors are being considered as promising electricity storage devices with green sustainable energy conversion. To efficiently develop and optimize pseudocapacitive material of vanadyl phosphate, herein, multiporous vanadyl phosphate/graphene (denoted as MP-VOPO₄@rGO) is fabricated for the first time with phytic acid as a phosphorus source by extremely simple sol-gel and drop coating methods, and used as the free binder thin film electrode of supercapacitors. The smart combination of honeycomb-like architecture and graphene incorporation results in more active sites and low internal resistance, significantly improving energy storage performance. The effect of introducting polystyrene (denoted as PS) template and rGO on the performance of the nanocomposite is systematically analyzed by comparing the performance of the corresponding thin film electrodes. The MP-VOPO₄@rGO thin film electrode delivers superior pseudocapacitive performance of 672 F g^-1 at 1 A g^-1 as well as a remarkable rate capability of 552 F g^-1 at 5 A g^-1, and it presents a remarkable longterm cycling stability, with a capacitance retention of 83.5% after 5000 cycles. Very interestingly, the results of surface capacitance contribution dominance clearly demonstrates its rapid capacitive response. In addition, based on MP-VOPO₄@rGO thin film as positive and negative electrodes, the corresponding assembled symmetric supercapacitors exihibits outstanding energy density of 26.3 Wh kg^-1 at power density of 249.9 W kg^-1. This investigation can not only provide a versatile strategy to design other thin film electrode materials but also open up a new insight into the development of polyanion phosphate composites for next-generation high performance energy storage systems.

High performance Li-ion capacitor fabricated with dual graphene-based materials

Lithium-ion capacitors (LICs) are now drawing increasing attention because of their potential to overcome the current energy limitations of supercapacitors and power limitations of lithium-ion batteries. In this work, we designed LICs by combining an electric double-layer capacitor cathode and a lithium-ion battery anode. Both the cathode and anode are derived from graphene-modified phenolic resin with tunable porosity and microstructure. They exhibit high specific capacity, superior rate capability and good cycling stability. Benefiting from the graphene-enhanced electrode materials, the all graphene-based LICs demonstrate a high working voltage (4.2 V), high energy density of 142.9 Wh kg^-1, maximum power density of 12.1 kW kg^-1 with energy density of 50 Wh kg^-1, and long stable cycling performance (with ∼88% capacity retention after 5000 cycles). Considering the high performance of the device, the cost-effective and facile preparation process of the active materials, this all graphene-based lithium-ion capacitor could have many promising applications in energy storage systems.