1
|
Chang S, Biswas P, Qin Z, Tian Z. Unusual Electrical Conductivity Enhancement in Stable n-Type Carbon Nanotube Networks. SMALL METHODS 2024:e2400585. [PMID: 39128136 DOI: 10.1002/smtd.202400585] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/23/2024] [Revised: 07/24/2024] [Indexed: 08/13/2024]
Abstract
Organic molecule-doped n-type single-walled carbon nanotube (SWCNT) networks are promising candidates for advanced energy applications, such as flexible thermoelectrics and photovoltaics. Yet charge transport in n-type SWCNTs is limited by two factors: i) charge localization impeding inter-tube transport caused by disordered mesostructure of randomly oriented SWCNTs and ii) reduction of charge carrier concentration driven by oxidation. Herein, studied the relationship between the mesostructure and thermoelectric properties of n-type SWCNTs obtained by surfactant-functionalization and polymer-dopant grafting. Surprisingly, the electrical conductivity of the polymer-doped SWCNTs keeps increasing with increasing polymer content, even after the saturation of carrier concentration, resulting in 12x higher conductivity on polymer-doping compared to surfactant-functionalization. While hopping transport typically dominates in disordered systems, it is shown that a bridging effect from the polymer causes unusual band-like conduction in polymer-doped SWCNTs. Additionally, since surfactants are essential to prevent oxidation and retain n-type over a long duration, shows that SWCNTs obtained through a dual-functionalization strategy using both polymer-dopant and surfactant, demonstrates a long-term stable high n-type thermoelectric power factor, when the surfactant amount is carefully controlled. Besides thermoelectrics, the findings are of general interest to developing stable and conductive n-type SWCNTs for various energy and electronic applications.
Collapse
Affiliation(s)
- Sooyon Chang
- Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY, 14853, USA
| | - Prithwish Biswas
- Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY, 14853, USA
| | - Zhao Qin
- Civil and Environmental Engineering, Syracuse University, Syracuse, NY, 13244, USA
| | - Zhiting Tian
- Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY, 14853, USA
| |
Collapse
|
2
|
Pan J, Wang J, Li K, Dai X, Li Q, Chong D, Chen B, Yan J, Wang H. Efficient molecular doping of polymeric semiconductors improved by coupled reaction. Nat Commun 2024; 15:5854. [PMID: 38997309 PMCID: PMC11245478 DOI: 10.1038/s41467-024-50293-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2024] [Accepted: 07/05/2024] [Indexed: 07/14/2024] Open
Abstract
Exploring chemical doping method to improve the electrical conductivity of polymers is still very attractive for researchers. In this work, we report a developed method of doping a polymer semiconductor aided by the coupled reaction that commonly exists in biological systems where a non-spontaneous reaction is driven by a spontaneous reaction. During the doping process, the chemical reaction between the dopant and the polymer is promoted by introducing a thermodynamically favorable reaction via adding additives that are highly reactive to the reduction product of the dopant to form a coupled reaction, thus significantly improving the electrical conductivity of polymers by 3-7 orders. This coupled reaction doping process shows the potential of wide applications in exploring efficient doping systems to prepare functional conducting polymers, which could be a powerful tool for modern organic electronics.
Collapse
Affiliation(s)
- Jiahao Pan
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, China
| | - Jing Wang
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, China
| | - Kuncai Li
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, China
| | - Xu Dai
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, China
| | - Qing Li
- College of Chemistry and Chemical Engineering, Dezhou University, Dezhou, Shandong, China
| | - Daotong Chong
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, China
| | - Bin Chen
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, China
| | - Junjie Yan
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, China
| | - Hong Wang
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, China.
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, China.
| |
Collapse
|
3
|
Zhang L, Shang H, Zou Q, Feng C, Gu H, Ding F. High-Power-Density and Excellent-Flexibility Thermoelectric Generator Based on All-SWCNTs/PVP Composites. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2306125. [PMID: 38282085 DOI: 10.1002/smll.202306125] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/20/2023] [Revised: 12/19/2023] [Indexed: 01/30/2024]
Abstract
Flexible polymer/single-wall carbon nanotube (SWCNT) composites are a vital component for wearable/portable electronics, but the development of their n-type counterpart is laggard. Furthermore, little attention is paid to the interaction between SWCNT and polymers, especially the unconjugated polymers, as well as the conversion mechanism of conduction characteristics. Here, the n-type flexible SWCNTs/Polyvinyl Pyrrolidone (PVP) films are successfully fabricated, where the oxygen atoms in PVP interacted with SWCNT via hydrogen bonds, which can lower the energy barrier of electron tunneling, providing the pathway for the electron transfer. Furthermore, with the increasing synthesis temperature, the hydrogen bonds strengthened and the thermal activation energy further improved, both of which enhanced the electron-donating ability of PVP, resulting in a high-power-factor value of 260 µW m-1 K-2. Based on the optimized SWCNTs/PVP films, a thermoelectric module is assembled, which achieved a power density of 400 µW cm-2 at a temperature difference of 56 K, coupled with excellent flexibility, showing a less than 1% variation of resistance after 5000 bending cycles. It shows the highest output-performance and the best flexibility among the reported SWCNT-based thermoelectric modules. This work provides significant insights into the interaction mechanism and performance optimization of hybrid thermoelectric composites, based on SWCNTs/unconjugated polymers.
Collapse
Affiliation(s)
- Lin Zhang
- Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Hongjing Shang
- Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Qi Zou
- Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Changping Feng
- Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
| | - Hongwei Gu
- Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Fazhu Ding
- Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| |
Collapse
|
4
|
Dai X, Wang Y, Sun X, Li K, Pan J, Wang J, Zhuang T, Chong D, Yan J, Wang H. All-Automated Fabrication of Freestanding and Scalable Photo-Thermoelectric Devices with High Performance. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2312570. [PMID: 38359909 DOI: 10.1002/adma.202312570] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/22/2023] [Revised: 02/03/2024] [Indexed: 02/17/2024]
Abstract
Flexible photo-thermoelectric (PTE) devices have great application prospects in the fields of solar energy conversion, ultrabroadband light detection, etc. A suitable manufacturing process to avoid the substrate effects as well as to create a narrow transition area between p-n modules for high-performance freestanding flexible PTE devices is highly desired. Herein, an automated laser fabrication (ALF) method is reported to construct the PTE devices with rylene-diimide-doped n-type single-walled carbon nanotube (SWCNT) films. The wet-compressing approach is developed to improve the thermoelectric power factors and figure of merit (ZT) of the SWCNT hybrid films. Then, the films are cut and patterned automatically to make PTE devices with various structures by the proposed ALF method. The freestanding PTE device with a narrow transition area of ≈2-3 µm between the p and n modules exhibits a high-power density of 0.32 µW cm-2 under the light of 200 mW cm-2, which is among the highest level for freestanding-film-based PTE devices. The results pave the way for the automatic production process of PTE devices for green power generation and ultrabroadband light detection.
Collapse
Affiliation(s)
- Xu Dai
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Yizhuo Wang
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Xu Sun
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Kuncai Li
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Jiahao Pan
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Jing Wang
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Tiantian Zhuang
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Daotong Chong
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Junjie Yan
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Hong Wang
- State Key Laboratory of Multiphase Flow in Power Engineering and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| |
Collapse
|
5
|
Yue O, Wang X, Xie L, Bai Z, Zou X, Liu X. Biomimetic Exogenous "Tissue Batteries" as Artificial Power Sources for Implantable Bioelectronic Devices Manufacturing. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2307369. [PMID: 38196276 PMCID: PMC10953594 DOI: 10.1002/advs.202307369] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/04/2023] [Revised: 11/27/2023] [Indexed: 01/11/2024]
Abstract
Implantable bioelectronic devices (IBDs) have gained attention for their capacity to conformably detect physiological and pathological signals and further provide internal therapy. However, traditional power sources integrated into these IBDs possess intricate limitations such as bulkiness, rigidity, and biotoxicity. Recently, artificial "tissue batteries" (ATBs) have diffusely developed as artificial power sources for IBDs manufacturing, enabling comprehensive biological-activity monitoring, diagnosis, and therapy. ATBs are on-demand and designed to accommodate the soft and confining curved placement space of organisms, minimizing interface discrepancies, and providing ample power for clinical applications. This review presents the near-term advancements in ATBs, with a focus on their miniaturization, flexibility, biodegradability, and power density. Furthermore, it delves into material-screening, structural-design, and energy density across three distinct categories of TBs, distinguished by power supply strategies. These types encompass innovative energy storage devices (chemical batteries and supercapacitors), power conversion devices that harness power from human-body (biofuel cells, thermoelectric nanogenerators, bio-potential devices, piezoelectric harvesters, and triboelectric devices), and energy transfer devices that receive and utilize external energy (radiofrequency-ultrasound energy harvesters, ultrasound-induced energy harvesters, and photovoltaic devices). Ultimately, future challenges and prospects emphasize ATBs with the indispensability of bio-safety, flexibility, and high-volume energy density as crucial components in long-term implantable bioelectronic devices.
Collapse
Affiliation(s)
- Ouyang Yue
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science & TechnologyXi'anShaanxi710021China
- National Demonstration Center for Experimental Light Chemistry Engineering EducationShaanxi University of Science &TechnologyXi'anShaanxi710021China
| | - Xuechuan Wang
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science & TechnologyXi'anShaanxi710021China
- College of Chemistry and Chemical EngineeringShaanxi University of Science & TechnologyXi'anShaanxi710021China
| | - Long Xie
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science & TechnologyXi'anShaanxi710021China
- College of Chemistry and Chemical EngineeringShaanxi University of Science & TechnologyXi'anShaanxi710021China
| | - Zhongxue Bai
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science & TechnologyXi'anShaanxi710021China
- National Demonstration Center for Experimental Light Chemistry Engineering EducationShaanxi University of Science &TechnologyXi'anShaanxi710021China
| | - Xiaoliang Zou
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science & TechnologyXi'anShaanxi710021China
- National Demonstration Center for Experimental Light Chemistry Engineering EducationShaanxi University of Science &TechnologyXi'anShaanxi710021China
| | - Xinhua Liu
- College of Bioresources Chemical and Materials EngineeringShaanxi University of Science & TechnologyXi'anShaanxi710021China
- National Demonstration Center for Experimental Light Chemistry Engineering EducationShaanxi University of Science &TechnologyXi'anShaanxi710021China
| |
Collapse
|
6
|
Chen X, Yang X, Han X, Ruan Z, Xu J, Huang F, Zhang K. Advanced Thermoelectric Textiles for Power Generation: Principles, Design, and Manufacturing. GLOBAL CHALLENGES (HOBOKEN, NJ) 2024; 8:2300023. [PMID: 38356682 PMCID: PMC10862169 DOI: 10.1002/gch2.202300023] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/21/2023] [Revised: 04/24/2023] [Indexed: 02/16/2024]
Abstract
Self-powered wearable thermoelectric (TE) devices significantly reduce the inconvenience caused to users, especially in daily use of portable devices and monitoring personal health. The textile-based TE devices (TETs) exhibit the excellent flexibility, deformability, and light weight, which fulfill demands of long-term wearing for the human body. In comparison to traditional TE devices with their longstanding research history, TETs are still in an initial stage of growth. In recent years, TETs to provide electricity for low-power wearable electronics have attracted increasing attention. This review summarizes the recent progress of TETs from the points of selecting TE materials, scalable fabrication methods of TE fibers/yarns and TETs, structure design of TETs and reported high-performance TETs. The key points to develop TETs with outstanding TE properties and mechanical performance and better than available optimization strategies are discussed. Furthermore, remaining challenges and perspectives of TETs are also proposed to suggest practical applications for heat harvesting from human body.
Collapse
Affiliation(s)
- Xinyi Chen
- Key Laboratory of Textile Science & TechnologyMinistry of EducationDonghua UniversityShanghai200051China
- College of TextilesDonghua UniversityShanghai200051China
| | - Xiaona Yang
- Key Laboratory of Textile Science & TechnologyMinistry of EducationDonghua UniversityShanghai200051China
- College of TextilesDonghua UniversityShanghai200051China
| | - Xue Han
- Key Laboratory of Textile Science & TechnologyMinistry of EducationDonghua UniversityShanghai200051China
- College of TextilesDonghua UniversityShanghai200051China
| | - Zuping Ruan
- Key Laboratory of Textile Science & TechnologyMinistry of EducationDonghua UniversityShanghai200051China
- College of TextilesDonghua UniversityShanghai200051China
| | - Jinchuan Xu
- Key Laboratory of Textile Science & TechnologyMinistry of EducationDonghua UniversityShanghai200051China
- College of TextilesDonghua UniversityShanghai200051China
| | - Fuli Huang
- Key Laboratory of Textile Science & TechnologyMinistry of EducationDonghua UniversityShanghai200051China
- College of TextilesDonghua UniversityShanghai200051China
| | - Kun Zhang
- Key Laboratory of Textile Science & TechnologyMinistry of EducationDonghua UniversityShanghai200051China
- College of TextilesDonghua UniversityShanghai200051China
| |
Collapse
|
7
|
Li K, Sun X, Wang Y, Wang J, Dai X, Yao Y, Chen B, Chong D, Yan J, Wang H. Densification Induced Decoupling of Electrical and Thermal Properties in Free-Standing MWCNT Films for Ultrahigh p- and n-Type Power Factors and Enhanced ZT. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2304266. [PMID: 37649184 DOI: 10.1002/smll.202304266] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/21/2023] [Revised: 07/20/2023] [Indexed: 09/01/2023]
Abstract
Generating sufficient power from waste heat is one of the most important things for thermoelectric (TE) techniques in numerous practical applications. The output power density of an organic thermoelectric generator (OTEG) is proportional to the power factors (PFs) and the electrical conductivities of organic materials. However, it is still challenging to have high PFs over 1 mW m-1 K-2 in free-standing films together with high electrical conductivities over 1000 S cm-1 . Herein, densifying multi-walled carbon nanotube (MWCNT) films would increase their electrical conductivity dramatically up to over 10 000 S cm-1 with maintained high Seebeck coefficients >60 µV K-1 , thus leading to ultrahigh PFs of 7.25 and 4.34 mW m-1 K-2 for p- and n-type MWCNT films, respectively. In addition, it is interesting to notice that the electrical properties increase faster than the thermal conductivities, resulting in enhanced ZT of 3.6 times in MWCNT films. An OTEG made of compressed MWCNT films is fabricated to demonstrate the heat-to-electricity conversion ability, which exhibits a high areal output power of ∼12 times higher than that made of pristine MWCNT films. This work demonstrates an effective way to high-performance nanowire/nanoparticle-based TE materials such as printable TE materials comprised of nanowires/nanoparticles.
Collapse
Affiliation(s)
- Kuncai Li
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Xu Sun
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Yizhuo Wang
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Jing Wang
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Xu Dai
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Yanqiu Yao
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Bin Chen
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Daotong Chong
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Junjie Yan
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Hong Wang
- State Key Laboratory of Multiphase Flow in Power Engineering & Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| |
Collapse
|
8
|
Zuo X, Han X, Lu Y, Liu Y, Wang Z, Li J, Cai K. Largely Enhanced Thermoelectric Power Factor of Flexible Cu 2-xS Film by Doping Mn. MATERIALS (BASEL, SWITZERLAND) 2023; 16:7159. [PMID: 38005087 PMCID: PMC10672275 DOI: 10.3390/ma16227159] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/23/2023] [Revised: 11/07/2023] [Accepted: 11/11/2023] [Indexed: 11/26/2023]
Abstract
Copper-sulfide-based materials have attracted noteworthy attention as thermoelectric materials due to rich elemental reserves, non-toxicity, low thermal conductivity, and adjustable electrical properties. However, research on the flexible thermoelectrics of copper sulfide has not yet been reported. In this work, we developed a facile method to prepare flexible Mn-doped Cu2-xS films on nylon membranes. First, nano to submicron powders with nominal compositions of Cu2-xMnyS (y = 0, 0.01, 0.03, 0.05, 0.07) were synthesized by a hydrothermal method. Then, the powders were vacuum-filtrated on nylon membranes and finally hot-pressed. Phase composition and microstructure analysis revealed that the films contained both Cu2S and Cu1.96S, and the size of the grains was ~20-300 nm. By Mn doping, there was an increase in carrier concentration and mobility, and ultimately, the electrical properties of Cu2-xS were improved. Eventually, the Cu2-xMn0.05S film showed a maximum power factor of 113.3 μW m-1 K-2 and good flexibility at room temperature. Moreover, an assembled four-leg flexible thermoelectric generator produced a maximum power of 249.48 nW (corresponding power density ~1.23 W m-2) at a temperature difference of 30.1 K, and had good potential for powering low-power-consumption wearable electronics.
Collapse
Affiliation(s)
| | | | | | | | | | | | - Kefeng Cai
- Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Shanghai Key Laboratory of Development and Application for Metal-Functional Materials, School of Materials Science & Engineering, Tongji University, Shanghai 201804, China; (X.Z.); (X.H.); (Y.L.); (Y.L.); (Z.W.); (J.L.)
| |
Collapse
|
9
|
Al-Fartoos MMR, Roy A, Mallick TK, Tahir AA. Advancing Thermoelectric Materials: A Comprehensive Review Exploring the Significance of One-Dimensional Nano Structuring. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:2011. [PMID: 37446526 DOI: 10.3390/nano13132011] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/08/2023] [Revised: 06/29/2023] [Accepted: 07/02/2023] [Indexed: 07/15/2023]
Abstract
Amidst the global challenges posed by pollution, escalating energy expenses, and the imminent threat of global warming, the pursuit of sustainable energy solutions has become increasingly imperative. Thermoelectricity, a promising form of green energy, can harness waste heat and directly convert it into electricity. This technology has captivated attention for centuries due to its environmentally friendly characteristics, mechanical stability, versatility in size and substrate, and absence of moving components. Its applications span diverse domains, encompassing heat recovery, cooling, sensing, and operating at low and high temperatures. However, developing thermoelectric materials with high-performance efficiency faces obstacles such as high cost, toxicity, and reliance on rare-earth elements. To address these challenges, this comprehensive review encompasses pivotal aspects of thermoelectricity, including its historical context, fundamental operating principles, cutting-edge materials, and innovative strategies. In particular, the potential of one-dimensional nanostructuring is explored as a promising avenue for advancing thermoelectric technology. The concept of one-dimensional nanostructuring is extensively examined, encompassing various configurations and their impact on the thermoelectric properties of materials. The profound influence of one-dimensional nanostructuring on thermoelectric parameters is also thoroughly discussed. The review also provides a comprehensive overview of large-scale synthesis methods for one-dimensional thermoelectric materials, delving into the measurement of thermoelectric properties specific to such materials. Finally, the review concludes by outlining prospects and identifying potential directions for further advancements in the field.
Collapse
Affiliation(s)
- Mustafa Majid Rashak Al-Fartoos
- Solar Energy Research Group, Environment and Sustainability Institute, University of Exeter, Penryn Campus, Cornwall TR10 9FE, UK
| | - Anurag Roy
- Solar Energy Research Group, Environment and Sustainability Institute, University of Exeter, Penryn Campus, Cornwall TR10 9FE, UK
| | - Tapas K Mallick
- Solar Energy Research Group, Environment and Sustainability Institute, University of Exeter, Penryn Campus, Cornwall TR10 9FE, UK
| | - Asif Ali Tahir
- Solar Energy Research Group, Environment and Sustainability Institute, University of Exeter, Penryn Campus, Cornwall TR10 9FE, UK
| |
Collapse
|
10
|
Ding P, Liu H, Zhu Z, Fu Y, Li H, Cao H, Meng F, Xu W, He Q, Cheng J. Directional Activated Exciton Highway via Fractal Electric Field Modulation for Ultrasensitive Carbon Nanotube-Based Sensors. ACS Sens 2023; 8:2375-2382. [PMID: 37253195 DOI: 10.1021/acssensors.3c00517] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
The electrical vapor sensor based on carbon nanotubes (CNTs) has attracted wide attention due to its excellent conductivity, stable interfacial structure, and low dimensional quantum effects. However, the conductivity and contact interface activity were still limited by the random distribution of coated CNTs, which led to limited performance. We developed a new strategy to unify the CNT directions with image fractal designing of the electrode system. In such a system, directional aligned CNTs were gained under a well-modulated electric field, leading to microscale CNT exciton highways and molecule-scale host-guest site activation. The carrier mobility of the aligned CNT device is 20-fold higher than that of the random network CNT device. With excellent electrical properties, such modulated CNT devices based on fractal electrodes behave as an ultrasensitive vapor sensor for methylphenethylamine, a mimic of illicit drug methamphetamine. The detection limit reached as low as 0.998 ppq, 6 orders of magnitude sensitive than the reported 5 ppb record based on interdigital electrodes with random distributed CNTs. Since the device is easily fabricated in wafer-level and compatible with the CMOS process, such a fractal design strategy for aligned CNT preparation will be widely applied in a variety of wafer-level electrical functional devices.
Collapse
Affiliation(s)
- Pengfei Ding
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Huan Liu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
| | - Zhen Zhu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Yanyan Fu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Huizi Li
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
| | - Huimin Cao
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
| | - Fanbing Meng
- Heilongjiang Electric Power Research Institute, State Grid of China, Xiangjiang Road 7, Harbin 150030, China
| | - Wei Xu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
- State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 611731, China
| | - Qingguo He
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Jiangong Cheng
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| |
Collapse
|
11
|
Zhao W, Lei Z, Wu P. Mechanically Adaptative and Environmentally Stable Ionogels for Energy Harvest. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023:e2300253. [PMID: 37083268 DOI: 10.1002/advs.202300253] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/11/2023] [Revised: 03/21/2023] [Indexed: 05/03/2023]
Abstract
Converting building and environment heat into electricity is a promising strategy for energy harvest to tackle global energy and environmental problems. The processing challenges, mechanical brittleness, and low environmental tolerance of typical thermoelectric materials, however, prevent them from realizing their full potential when employed in outdoor building systems. Herein, a general concept based on synergistic ionic associations to significantly improve the mechanical properties and harsh environment stability for high-performance ionic-type thermoelectric (i-TE) gels is explored. They demonstrate extraordinarily high stretchability (1300-2100%), fast self-healing (120 s), temperature insensitivity, and great water-proof performance, and could be painted on a variety of surfaces. The n-type ionic Seebeck coefficient is up to -8.8 mV K-1 and the ionic conductivity is more than 0.14 mS cm-1 . Both exhibit remarkable thermal and humidity stability (293-333 K, 20-100 RH%), which are rarely achieved in previous studies. Even on a cloudy day, the open-circuit thermovoltage for a painted i-TE array with an area of about 8.5 × 10-3 m2 is above 2 V. This research offers a promising approach for gathering significant waste heat and even solar energy on outside building surfaces in an effective and sustainable manner.
Collapse
Affiliation(s)
- Wei Zhao
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Chemistry and Chemical Engineering, Center for Advanced Low-Dimension Materials, Donghua University, Shanghai, 201620, China
| | - Zhouyue Lei
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Chemistry and Chemical Engineering, Center for Advanced Low-Dimension Materials, Donghua University, Shanghai, 201620, China
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 02138, USA
| | - Peiyi Wu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Chemistry and Chemical Engineering, Center for Advanced Low-Dimension Materials, Donghua University, Shanghai, 201620, China
| |
Collapse
|
12
|
Zhu Z, Liu H, Ding P, Fu Y, Cao H, Xu W, He Q, Cheng J. Direct Active Site at the Van der Waals Heterostructure Interface with Synthetic Drug Analogue N-Methylphenethylimine Ultrasensitivity. ACS Sens 2023; 8:1318-1327. [PMID: 36795762 DOI: 10.1021/acssensors.2c02829] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/17/2023]
Abstract
CNT/organic probe-based chemiresistive sensors suffer from the problem of low sensitivity and poor stability due to the unstable and unfavorable CNT/organic probe interface. A new designing strategy of a one-dimensional van der Waals heterostructure was developed for ultrasensitive vapor sensing. By modifying the perylene diimide molecule at the bay region with phenoxyl and further Boc-NH- phenoxy side chains, a highly stable 1D VDW heterostructure SWCNT-probe molecule system was formed with ultrasensitivity and specificity. Interfacial recognition sites consisting of SWCNT and the probe molecule are responsible for the synergistical and excellent sensing response to MPEA molecules, which was proved by Raman, XPS, and FTIR characterizations together with dynamic simulation. Based on such a sensitive and stable VDW heterostructure system, the measured detection limit reached as low as 3.6 ppt for the synthetic drug analogue N-methylphenethylimine (MPEA) in the vapor phase, and the sensor showed almost no performance degradation even after 10 days. Furthermore, a miniaturized detector was developed for real-time monitoring of drug vapor detection.
Collapse
Affiliation(s)
- Zhen Zhu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Huan Liu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
| | - Pengfei Ding
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Yanyan Fu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Huimin Cao
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
| | - Wei Xu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Qingguo He
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| | - Jiangong Cheng
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050, China
- Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Yuquan Road 19, Beijing 100039, China
| |
Collapse
|
13
|
Li K, Qin Y, Li ZG, Guo TM, An LC, Li W, Li N, Bu XH. Elastic properties related energy conversions of coordination polymers and metal–organic frameworks. Coord Chem Rev 2022. [DOI: 10.1016/j.ccr.2022.214692] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
14
|
Gao XZ, Gao FL, Liu J, Li Y, Wan P, Yu ZZ, Li X. Self-Powered Resilient Porous Sensors with Thermoelectric Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) and Carbon Nanotubes for Sensitive Temperature and Pressure Dual-Mode Sensing. ACS APPLIED MATERIALS & INTERFACES 2022; 14:43783-43791. [PMID: 36112650 DOI: 10.1021/acsami.2c12892] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Portable and wearable dual-mode sensors that can simultaneously detect multiple stimuli are essential for emerging artificial intelligence applications, and most efforts are devoted to exploring pressure-sensing devices. It is still challenging to integrate temperature and pressure-sensing functions into one sensor without the requirement for complex decoupling processes. Herein, we develop a self-powered and multifunctional dual-mode sensor by dip-coating melamine sponge with both poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and carboxylated single-walled carbon nanotubes (CNTs). By integrating thermoelectric and conductive PEDOT:PSS/CNT components with the hydrophilic and resilient porous sponge, the resultant sensor is efficient in independently detecting temperature and pressure changes. The temperature and pressure stimuli can be independently converted to voltage and electrical resistance signals on the basis of the Seebeck and piezoresistive effects, respectively. The sensor exhibits a high Seebeck coefficient of 35.9 μV K-1 with a minimum temperature detection limit of 0.4 K and a pressure sensitivity of -3.35% kPa-1 with a minimum pressure detection limit of 4 Pa. Interestingly, the sensor can also be self-powered upon illumination. These multi-functionalities make the sensor a promising tool for applications in electronic skin, soft robots, solar energy conversion, and personal health monitoring.
Collapse
Affiliation(s)
- Xuan-Zhi Gao
- Beijing Key Laboratory of Advanced Functional Polymer Composites, Beijing University of Chemical Technology, Beijing 100029, China
- State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Fu-Lin Gao
- Beijing Key Laboratory of Advanced Functional Polymer Composites, Beijing University of Chemical Technology, Beijing 100029, China
| | - Ji Liu
- School of Chemistry, CRANN and AMBER, Trinity College Dublin, Dublin D2, Ireland
| | - Yongji Li
- State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Pengbo Wan
- State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Zhong-Zhen Yu
- State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Xiaofeng Li
- Beijing Key Laboratory of Advanced Functional Polymer Composites, Beijing University of Chemical Technology, Beijing 100029, China
| |
Collapse
|
15
|
Advances in Thermo-Electrochemical (TEC) Cell Performances for Harvesting Low-Grade Heat Energy: A Review. SUSTAINABILITY 2022. [DOI: 10.3390/su14159483] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
Thermo-electrochemical cells (also known as thermocells, TECs) represent a promising technology for harvesting and exploiting low-grade waste heat (<100–150 °C) ubiquitous in the modern environment. Based on temperature-dependent redox reactions and ion diffusion, emerging liquid-state thermocells convert waste heat energy into electrical energy, generating power at low costs, with minimal material consumption and negligible carbon footprint. Recent developments in thermocell performances are reviewed in this article with specific focus on new redox couples, electrolyte optimisation towards enhancing power output and operating temperature regime and the use of carbon and other nanomaterials for producing electrodes with high surface area for increasing current density and device performance. The highest values of output power and cell potentials have been achieved for the redox ferri/ferrocyanide system and Co2+/3+, with great opportunities for further development in both aqueous and non-aqueous solvents. New thermoelectric applications in the field include wearable and portable electronic devices in the health and performance-monitoring sectors; using body heat as a continuous energy source, thermoelectrics are being employed for long-term, continuous powering of these devices. Energy storage in the form of micro supercapacitors and in lithium ion batteries is another emerging application. Current thermocells still face challenges of low power density, conversion efficiency and stability issues. For waste-heat conversion (WHC) to partially replace fossil fuels as an alternative energy source, power generation needs to be commercially viable and cost-effective. Achieving greater power density and operations at higher temperatures will require extensive research and significant developments in the field.
Collapse
|
16
|
Lin Z, Dang H, Zhao C, Du Y, Chi C, Ma W, Li Y, Zhang X. The cross-interface energy-filtering effect at organic/inorganic interfaces balances the trade-off between thermopower and conductivity. NANOSCALE 2022; 14:9419-9430. [PMID: 35730753 DOI: 10.1039/d2nr02432b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The energy-filtering effect has been widely employed to elucidate the enhanced thermoelectric properties of organic/inorganic hybrids. However, the traditional Mott criterion cannot identify the energy-filtering effect of organic/inorganic hybrids due to the limitations of the Hall effect measurement in determining their carrier concentration. In this work, a carrier concentration-independent strategy under the theoretical framework of the Kang-Snyder model is proposed and demonstrated using PANI/MWCNT composites. The result indicates that the energy-filtering effect is triggered on increasing the temperature to 220 K. The energy-filtering effect gives a symmetry-breaking characteristic to the density of states of the charge carriers and leads to a higher thermopower of PANI/MWCNT than that of each constituent. From a morphological perspective, a paracrystalline PANI layer with a thickness of 3 nm is spontaneously assembled on the MWCNT network and serves as a metallic percolation pathway for carriers, resulting in a 5.56-fold increase in conductivity. The cooperative 3D carrier transport mode, including the 1D metallic transport along the paracrystalline PANI and the 2D cross-interface energy-filtering transport, co-determines a 4-fold increase in the power factors of PANI/MWCNT at 300 K. This work provides a physical insight into the improvement of the thermoelectric performance of organic/inorganic hybrids via the energy-filtering effect.
Collapse
Affiliation(s)
- Zizhen Lin
- Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China.
- Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China.
| | - Hao Dang
- Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China.
| | - Chunyu Zhao
- Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China.
| | - Yanzheng Du
- Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China.
| | - Cheng Chi
- Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China.
| | - Weigang Ma
- Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China.
| | - Yinshi Li
- Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China.
| | - Xing Zhang
- Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China.
| |
Collapse
|
17
|
DFT investigations of AgMC 7H 10N 2 (M = Cl, Br, and I) metal organic molecules: NMR, optoelectronic, and transport properties. J Mol Model 2022; 28:136. [PMID: 35511304 DOI: 10.1007/s00894-022-05114-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2021] [Accepted: 04/18/2022] [Indexed: 10/18/2022]
Abstract
The full-potential linearized augmented plane wave (FP-LAPW) method was used for the calculation of the structural, nuclear magnetic resonance (NMR), optoelectronic, and thermoelectric properties of AgMC7H10N2 (M = Cl, Br, and I) compounds. The calculated wide band gap of AgMC7H10N2 (M = Cl, Br, and I) metal organic molecules with the density of states approach were 3.32, 3.29, and 3.10 eV, respectively. The NMR parameters are calculated for the Ag, Cl, Br, I, C, N, O, and H elements. It is found that by decreasing bandgap, the isotropic NMR chemical shielding values of Cl, Br, and I elements increase. The strong hybridization of Ag-4d, Cl-3p, Br-4p, and I-5p states are observed at the top of the valence band. The birefringence and anisotropic properties are observed in the optical spectra with high plasmon energies, and the figure of merit, ZT, of 0.98 for AgCl(C7H10N2) compound is found at 300 K. Hence, these compounds are attractive flexible metal organic molecules for optoelectronic and transport applications.
Collapse
|
18
|
Wang J, Li Q, Li K, Sun X, Wang Y, Zhuang T, Yan J, Wang H. Ultra-High Electrical Conductivity in Filler-Free Polymeric Hydrogels Toward Thermoelectrics and Electromagnetic Interference Shielding. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2109904. [PMID: 35064696 DOI: 10.1002/adma.202109904] [Citation(s) in RCA: 37] [Impact Index Per Article: 18.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/06/2021] [Revised: 01/19/2022] [Indexed: 06/14/2023]
Abstract
Conducting hydrogels have attracted much attention for the emerging field of hydrogel bioelectronics, especially poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) based hydrogels, because of their great biocompatibility and stability. However, the electrical conductivities of hydrogels are often lower than 1 S cm-1 which are not suitable for digital circuits or applications in bioelectronics. Introducing conductive inorganic fillers into the hydrogels can improve their electrical conductivities. However, it may lead to compromises in compliance, biocompatibility, deformability, biodegradability, etc. Herein, a series of highly conductive ionic liquid (IL) doped PEDOT:PSS hydrogels without any conductive fillers is reported. These hydrogels exhibit high conductivities up to ≈305 S cm-1 , which is ≈8 times higher than the record of polymeric hydrogels without conductive fillers in literature. The high electrical conductivity results in enhanced areal thermoelectric output power for hydrogel-based thermoelectric devices, and high specific electromagnetic interference (EMI) shielding efficiency which is about an order in magnitude higher than that of state-of-the-art conductive hydrogels in literature. Furthermore, these stretchable (strain >30%) hydrogels exhibit fast self-healing, and shape/size-tunable properties, which are desirable for hydrogel bioelectronics and wearable organic devices. The results indicate that these highly conductive hydrogels are promising in applications such as sensing, thermoelectrics, EMI shielding, etc.
Collapse
Affiliation(s)
- Jing Wang
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Qing Li
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Kuncai Li
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Xu Sun
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Yizhuo Wang
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Tiantian Zhuang
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Junjie Yan
- State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
- School of energy and power engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Hong Wang
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
- School of energy and power engineering, Xi'an Jiaotong University, Xi'an, 710054, China
- Zhejiang YunFeng New Materials Technology Co., Ltd, No. 755 Hongji Street, Jinghua Zhejiang, 321015, China
| |
Collapse
|
19
|
Wang J, Wang Y, Li K, Dai X, Zhang L, Wang H. Lateral Fully Organic P-N Diodes Created in a Single Donor-Acceptor Copolymer. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2106624. [PMID: 34717015 DOI: 10.1002/adma.202106624] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/23/2021] [Revised: 10/28/2021] [Indexed: 06/13/2023]
Abstract
P-N junctions exist in many solid-state organic devices, such as light-emitting diodes, solar cells, and thermoelectric devices. Creating P-N junctions by bulk chemical doping in a single organic material (like silicon doped by boron and phosphorus) may capitalize the vast scientific and technological groundwork established in the inorganic semiconducting field. However, high-performance single-organic-material P-N junctions are seldom reported, because the diffusion of the dopant counterions often leads to transient rectification properties. Herein, a new type of lateral fully organic diodes created in single donor-acceptor (D-A) copolymer films with only one P-type dopant is reported. The achieved lateral devices exhibit high current densities of ≈3.83 A cm-2 and a high rectification ratio of ≈2100, which are beyond the requirements for high-frequency identification tags. The P- to N-type polarity switching mechanism is proposed after spectroscopic and structural tests. Decent stability of the organic diode is obtained, which is due to the long channel length and low diffusion speed of the large size of dopants. This work opens the opportunities to create P-N junctions in ways of silicon-based inorganic semiconductors and promises new opportunities for integrating organic materials for flexible and printable organic devices.
Collapse
Affiliation(s)
- Jing Wang
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Yizhuo Wang
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Kuncai Li
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Xu Dai
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Liuyang Zhang
- School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| | - Hong Wang
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, 710054, China
- State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
- School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710054, China
| |
Collapse
|
20
|
Xia X, Zhang Q, Zhou W, Mei J, Xiao Z, Xi W, Wang Y, Xie S, Zhou W. Integrated, Highly Flexible, and Tailorable Thermoelectric Type Temperature Detectors Based on a Continuous Carbon Nanotube Fiber. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2102825. [PMID: 34499425 DOI: 10.1002/smll.202102825] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/14/2021] [Revised: 06/27/2021] [Indexed: 06/13/2023]
Abstract
As possible alternatives to traditional thermoelectric (TE) materials, carbon nanomaterials and their hybrid materials have great potential in the future application of flexible and lightweight temperature detection. In this work, an integrated, highly flexible, and tailorable TE temperature detector with high performance has been fabricated based on a continuous single-walled carbon nanotube (SWCNT) fiber. The detector consists of more than one pairs of thermocouples composed of p-type SWCNT fiber and n-type SWCNT hybrid fiber in situ doped by polyethylenimine. Due to the node contact mechanism of the detection, the sensitivity of the detector can be improved with the increase of the number of p-n thermocouples, independent of the length of the thermocouple. The temperature detection process of the detector has been studied in detail. In particular, the integrated and flexible detector can be divided into several sub-detectors easily by cutting, illustrating the prospect of large-scale preparation of this kind of novel temperature detectors. Its high flexibility ensures the detector to maintain excellent detection performance after 15 000 bending circles. Furthermore, the as-designed TE type temperature detector demonstrates a great application promise for real-time temperature detection and temperature change sensing even in complex surface and harsh environment.
Collapse
Affiliation(s)
- Xiaogang Xia
- Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Qiang Zhang
- Department of Applied Physics, Aalto University School of Science, P.O. Box 15100, Aalto, FI-00076, Finland
| | - Wenbin Zhou
- Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Ministry of Education, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing, 100124, China
| | - Jie Mei
- Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Zhuojian Xiao
- Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Wei Xi
- Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Yanchun Wang
- Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing, 100190, China
| | - Sishen Xie
- Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences, University of Chinese Academy of Sciences, Beijing, 100049, China
- Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing, 100190, China
- Songshan Lake Materials Laboratory, Dongguan, Guangdong, 523808, China
| | - Weiya Zhou
- Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
- School of Physical Sciences, University of Chinese Academy of Sciences, Beijing, 100049, China
- Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing, 100190, China
- Songshan Lake Materials Laboratory, Dongguan, Guangdong, 523808, China
| |
Collapse
|
21
|
Griggs S, Marks A, Bristow H, McCulloch I. n-Type organic semiconducting polymers: stability limitations, design considerations and applications. JOURNAL OF MATERIALS CHEMISTRY. C 2021; 9:8099-8128. [PMID: 34277009 PMCID: PMC8264852 DOI: 10.1039/d1tc02048j] [Citation(s) in RCA: 61] [Impact Index Per Article: 20.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/03/2021] [Accepted: 06/10/2021] [Indexed: 04/14/2023]
Abstract
This review outlines the design strategies which aim to develop high performing n-type materials in the fields of organic thin film transistors (OTFT), organic electrochemical transistors (OECT) and organic thermoelectrics (OTE). Figures of merit for each application and the limitations in obtaining these are set out, and the challenges with achieving consistent and comparable measurements are addressed. We present a thorough discussion of the limitations of n-type materials, particularly their ambient operational instability, and suggest synthetic methods to overcome these. This instability originates from the oxidation of the negative polaron of the organic semiconductor (OSC) by water and oxygen, the potentials of which commonly fall within the electrochemical window of n-type OSCs, and consequently require a LUMO level deeper than ∼-4 eV for a material with ambient stability. Recent high performing n-type materials are detailed for each application and their design principles are discussed to explain how synthetic modifications can enhance performance. This can be achieved through a number of strategies, including utilising an electron deficient acceptor-acceptor backbone repeat unit motif, introducing electron-withdrawing groups or heteroatoms, rigidification and planarisation of the polymer backbone and through increasing the conjugation length. By studying the fundamental synthetic design principles which have been employed to date, this review highlights a path to the development of promising polymers for n-type OSC applications in the future.
Collapse
Affiliation(s)
- Sophie Griggs
- Department of Chemistry, Chemistry Research Laboratory, University of Oxford Oxford OX1 3TA UK
| | - Adam Marks
- Department of Chemistry, Chemistry Research Laboratory, University of Oxford Oxford OX1 3TA UK
| | - Helen Bristow
- Department of Chemistry, Chemistry Research Laboratory, University of Oxford Oxford OX1 3TA UK
| | - Iain McCulloch
- Department of Chemistry, Chemistry Research Laboratory, University of Oxford Oxford OX1 3TA UK
- King Abdullah University of Science and Technology (KAUST), KAUST Solar Center (KSC) Thuwal 23955-6900 Saudi Arabia
| |
Collapse
|
22
|
Pan F, Bai S, Liu T, Tang D, Wei X, Chen X, Lv M, Li Y. Single-wall carbon nanotube-containing cathode interfacial materials for high performance organic solar cells. Sci China Chem 2021. [DOI: 10.1007/s11426-020-9917-6] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
23
|
Sanad MF, Shalan AE, Abdellatif SO, Serea ESA, Adly MS, Ahsan MA. Thermoelectric Energy Harvesters: A Review of Recent Developments in Materials and Devices for Different Potential Applications. Top Curr Chem (Cham) 2020; 378:48. [PMID: 33037928 DOI: 10.1007/s41061-020-00310-w] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2020] [Accepted: 09/10/2020] [Indexed: 11/30/2022]
Abstract
The thermoelectric effect encompasses three different effects, i.e. Seebeck effect, Peltier effect, and Thomson effect, which are considered as thermally activated materials that alter directions in smart materials. It is currently considered one of the most challenging green energy harvesting mechanisms among researchers. The ability to utilize waste thermal energy that is generated by different applications promotes the use of thermoelectric harvesters across a wide range of applications. This review illustrates the different attempts to fabricate efficient, robust and sustainable thermoelectric harvesters, considering the material selection, characterization, device fabrication and potential applications. Thermoelectric harvesters with a wide range of output power generated reaching the milliwatt range have been considered in this work, with a special focus on the main advantages and disadvantages in these devices. Additionally, this review presents various studies reported in the literature on the design and fabrication of thermoelectric harvesters and highlights their potential applications. In order to increase the efficiency of equipment and processes, the generation of thermoelectricity via thermoelectric materials is achieved through the harvesting of residual energy. The review discusses the main challenges in the fabrication process associated with thermoelectric harvester implementation, as well as the considerable advantages of the proposed devices. The use of thermoelectric harvesters in a wide range of applications where waste thermal energy is used and the impact of the thermoelectric harvesters is also highlighted in this review.
Collapse
Affiliation(s)
- Mohamed Fathi Sanad
- FabLab, Centre for Emerging Learning Technologies (CELT), Electrical Engineering Department, The British University in Egypt (BUE), Cairo, 11387, Egypt
| | - Ahmed Esmail Shalan
- Central Metallurgical Research and Development Institute (CMRDI), P.O. Box 87, Helwan, 11421, Cairo, Egypt. .,BCMaterials-Basque Center for Materials, Applications and Nanostructures, Martina Casiano, UPV/EHU Science Park, Barrio Sarriena S/N, 48940, Leioa, Spain.
| | - Sameh O Abdellatif
- FabLab, Centre for Emerging Learning Technologies (CELT), Electrical Engineering Department, The British University in Egypt (BUE), Cairo, 11387, Egypt
| | - Esraa Samy Abu Serea
- Chemistry and Biochemistry Department, Faculty of Science, Cairo University, Cairo, Egypt.,BCMaterials-Basque Center for Materials, Applications and Nanostructures, Martina Casiano, UPV/EHU Science Park, Barrio Sarriena S/N, 48940, Leioa, Spain
| | - Mina Shawky Adly
- Chemistry Department, Faculty of Science, Mansoura University, Mansoura, Egypt.,Department of Chemistry, Virginia Commonwealth University, Richmond, VA, 23284, USA
| | - Md Ariful Ahsan
- The University of Texas at El Paso, 500 W University Ave, El Paso, TX, 79968, USA
| |
Collapse
|
24
|
Kim S, Mo JH, Jang KS. High-Performance n-Type Carbon Nanotubes Doped by Oxidation of Neighboring Sb 2Te 3 for a Flexible Thermoelectric Generator. ACS APPLIED MATERIALS & INTERFACES 2020; 12:43778-43784. [PMID: 32870650 DOI: 10.1021/acsami.0c12766] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Flexible thermoelectric devices can be potentially used for flexible cooling and energy harvesting from various heat sources such as the human body. However, the development of flexible thermoelectric materials with excellent thermoelectric performance is still very challenging. In this study, a simple solution process is proposed for the preparation of flexible inorganic/carbon nanotube hybrid films with record power factors among those of the reported flexible n-type thermoelectric materials. The hybrid films fabricated by bar-coating a carbon nanotube-dispersed Sb2Te3 solution exhibit n-type power factors of up to 2440 ± 267 μV m-1 K-2 at room temperature. The dissolved Sb2Te3 recrystallizes on the carbon nanotube surfaces and form hybrid solids. The ultrahigh power factor may be originated from the effective n-doping of carbon nanotubes by the oxidation of neighboring Sb2Te3. Using the thermoelectric hybrid film, a multilayer stacked thermoelectric generator is fabricated. The flexible device with a thermal contact area of 3.8 cm2 exhibits an output power of up to 11.3 μW at a vertical ΔT of 7.5 K. This study paves the way for the realization of flexible thermoelectric devices with various device geometries.
Collapse
Affiliation(s)
- Sohee Kim
- Department of Applied Chemistry, Hanyang University, Ansan, Gyeonggi-do 15588, Republic of Korea
| | - Jun-Hyun Mo
- Department of Applied Chemistry, Hanyang University, Ansan, Gyeonggi-do 15588, Republic of Korea
| | - Kwang-Suk Jang
- Department of Applied Chemistry, Hanyang University, Ansan, Gyeonggi-do 15588, Republic of Korea
| |
Collapse
|
25
|
Chen X, Shi W, Zhang K. Observation of Energy-Dependent Carrier Scattering in Conducting Polymer Nanowire Blends for Enhanced Thermoelectric Performance. ACS APPLIED MATERIALS & INTERFACES 2020; 12:34451-34461. [PMID: 32614168 DOI: 10.1021/acsami.0c09907] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Without sacrificing the intrinsic softness and flexibility of conducting polymers, their blends have been demonstrated to be promising to improve thermoelectric properties of conducting polymers. However, the underlying mechanism for the thermoelectric enhancement is hitherto far from clear and is worthy of being explored deeply. In this work, we report novel conducting polymer nanowire blends by physically mixing poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires and polypyrrole (PPy) nanowires. By carefully tuning the energetic structure of PPy nanowires (nanofillers), the Seebeck coefficients and power factors of nanowire blends are surprisingly increased by ∼20 and ∼32% (compared to PEDOT nanowires), respectively. By means of first-principles calculations and experimental characterizations, we qualitatively confirm that the improved thermoelectric property is a consequence of a built-in energy barrier at nanowire interfaces rather than the commonly used doping/de-doping effect. Subsequently, we further employ the Kang-Snyder transport model and quantitatively demonstrate that the energy barrier involves energy-dependent carrier scattering (thus, a change of total relaxation time) at nanowire heterojunctions, which contributes to the enhanced Seebeck coefficients and power factors. Our work sheds light on the mechanism that can be adopted to design soft but high-performance thermoelectric materials with conducting polymer blends.
Collapse
Affiliation(s)
- Xinyi Chen
- Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, PR China
| | - Wen Shi
- Institute of High Performance Computing, Agency for Science, Technology and Research, 1 Fusionopolis Way, #16-16 Connexis, Singapore 138632, Republic of Singapore
| | - Kun Zhang
- Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, PR China
| |
Collapse
|
26
|
Shi XL, Zou J, Chen ZG. Advanced Thermoelectric Design: From Materials and Structures to Devices. Chem Rev 2020; 120:7399-7515. [PMID: 32614171 DOI: 10.1021/acs.chemrev.0c00026] [Citation(s) in RCA: 377] [Impact Index Per Article: 94.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
The long-standing popularity of thermoelectric materials has contributed to the creation of various thermoelectric devices and stimulated the development of strategies to improve their thermoelectric performance. In this review, we aim to comprehensively summarize the state-of-the-art strategies for the realization of high-performance thermoelectric materials and devices by establishing the links between synthesis, structural characteristics, properties, underlying chemistry and physics, including structural design (point defects, dislocations, interfaces, inclusions, and pores), multidimensional design (quantum dots/wires, nanoparticles, nanowires, nano- or microbelts, few-layered nanosheets, nano- or microplates, thin films, single crystals, and polycrystalline bulks), and advanced device design (thermoelectric modules, miniature generators and coolers, and flexible thermoelectric generators). The outline of each strategy starts with a concise presentation of their fundamentals and carefully selected examples. In the end, we point out the controversies, challenges, and outlooks toward the future development of thermoelectric materials and devices. Overall, this review will serve to help materials scientists, chemists, and physicists, particularly students and young researchers, in selecting suitable strategies for the improvement of thermoelectrics and potentially other relevant energy conversion technologies.
Collapse
Affiliation(s)
- Xiao-Lei Shi
- Centre for Future Materials, University of Southern Queensland, Springfield Central, Queensland 4300, Australia.,School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, Queensland 4072, Australia
| | - Jin Zou
- School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, Queensland 4072, Australia.,Centre for Microscopy and Microanalysis, The University of Queensland, Brisbane, Queensland 4072, Australia
| | - Zhi-Gang Chen
- Centre for Future Materials, University of Southern Queensland, Springfield Central, Queensland 4300, Australia.,School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, Queensland 4072, Australia
| |
Collapse
|
27
|
Microstructure and Thermoelectric Characterization of Composite Nanofiber Webs Derived from Polyacrylonitrile and Sodium Cobalt Oxide Precursors. Sci Rep 2020; 10:9633. [PMID: 32541794 PMCID: PMC7295795 DOI: 10.1038/s41598-020-66667-6] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2020] [Accepted: 05/18/2020] [Indexed: 11/17/2022] Open
Abstract
We report the microstructure and thermoelectric properties of composite nanofiber webs, which were fabricated by dual-electrospinning of polyacrylonitrile (PAN) and sodium cobalt oxide (NaCo2O4) precursor solutions with different input compositions and following heat-treatment at 600–900 °C for simultaneous carbonation and calcination. The SEM and EDS mapping images revealed that PAN-derived carbon nanofibers (CNFs) and NaCo2O4-based ceramic nanofibers coexisted in the composite nanofiber webs and that their relative contents could be controlled by the input compositions. The Seebeck coefficient increased from ~26.77 to ~73.28 μV/K and from ~14.83 to ~40.56 μV/K with increasing the relative content of NaCo2O4 nanofibers in the composite nanofiber webs fabricated at 700 and 800 °C, respectively. On the other hand, the electrical conductivity of the composite nanofiber webs increased with the decrement of the relative content of NaCo2O4 nanofibers as well as the increment of the heat-treatment temperature. Owing to the opposite contributions of NaCo2O4 nanofibers and CNFs to the Seebeck coefficient, electrical conductivity and thermal conductivity, a maximum power factor of ~5.79 μW/mK2 and a figure of merit of ~0.01 were attained for CNF/NaCo2O4-based composite nanofiber webs fabricated at 45 wt% input composition of NaCo2O4 and at heat-treatment of 700 °C.
Collapse
|
28
|
Haque MA, Kee S, Villalva DR, Ong W, Baran D. Halide Perovskites: Thermal Transport and Prospects for Thermoelectricity. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2020; 7:1903389. [PMID: 32440477 PMCID: PMC7237854 DOI: 10.1002/advs.201903389] [Citation(s) in RCA: 62] [Impact Index Per Article: 15.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/05/2019] [Revised: 03/08/2020] [Accepted: 03/10/2020] [Indexed: 05/24/2023]
Abstract
The recent re-emergence of halide perovskites has received escalating interest for optoelectronic applications. In addition to photovoltaics, the multifunctional nature of halide perovskites has led to diverse applications. The ultralow thermal conductivity coupled with decent mobility and charge carrier tunability led to the prediction of halide perovskites as a possible contender for future thermoelectrics. Herein, recent advances in thermal transport of halide perovskites and their potentials and challenges for thermoelectrics are reviewed. An overview of the phonon behavior in halide perovskites, as well as the compositional dependency is analyzed. Understanding thermal transport and knowing the thermal conductivity value is crucial for creating effective heat dissipation schemes and determining other thermal-related properties like thermo-optic coefficients, hot-carrier cooling, and thermoelectric efficiency. Recent works on halide perovskite-based thermoelectrics together with theoretical predictions for their future viability are highlighted. Also, progress on modulating halide perovskite-based thermoelectric properties using light and chemical doping is discussed. Finally, strategies to overcome the limiting factors in halide perovskite thermoelectrics and their prospects are emphasized.
Collapse
Affiliation(s)
- Md Azimul Haque
- KAUST Solar CenterPhysical Science and Engineering DivisionKing Abdullah University of Science and TechnologyThuwal23955‐6900Saudi Arabia
| | - Seyoung Kee
- KAUST Solar CenterPhysical Science and Engineering DivisionKing Abdullah University of Science and TechnologyThuwal23955‐6900Saudi Arabia
| | - Diego Rosas Villalva
- KAUST Solar CenterPhysical Science and Engineering DivisionKing Abdullah University of Science and TechnologyThuwal23955‐6900Saudi Arabia
| | - Wee‐Liat Ong
- ZJU‐UIUC InstituteCollege of Energy EngineeringZhejiang UniversityHangzhouZhejiang310027China
- State Key Laboratory of Clean Energy UtilizationZhejiang UniversityHangzhouZhejiang310027China
| | - Derya Baran
- KAUST Solar CenterPhysical Science and Engineering DivisionKing Abdullah University of Science and TechnologyThuwal23955‐6900Saudi Arabia
| |
Collapse
|
29
|
Chen Z, Liu T, Pan C, Tan G. Enhanced Thermoelectric Performance of Indacenodithiophene-Benzothiadiazole Copolymer Containing Polar Side Chains and Single Wall Carbon Nanotubes Composites. Polymers (Basel) 2020; 12:polym12040848. [PMID: 32272620 PMCID: PMC7240368 DOI: 10.3390/polym12040848] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2020] [Revised: 03/30/2020] [Accepted: 04/04/2020] [Indexed: 11/16/2022] Open
Abstract
Composite films of indacenodithiophene-bezothiadazole copolymers bearing polar side chains (P1) and single wall carbon nanotubes (SWCNTs) are found to show a competitive thermoelectric performance compared to their analogous polymers with aliphatic side chains (P2). The enhanced power factors could be attributed to the stronger interfacial interactions between the P1/SWCNTs compared to that of P2/SWCNTs containing the same ratio of SWCNTs. A maximum power factor of 161.34 μW m−1 K−2 was obtained for the composite films of P1/SWCNTs for a filler content of 50 wt%, which is higher than that of P2/SWCNTs (139.06 μW m−1 K−2, 50 wt%). Our work sheds light on the design of side-chains in efficient conjugated polymers/SWCNTs thermoelectric materials and contributes to the understanding of their thermoelectric properties.
Collapse
Affiliation(s)
- Zhongming Chen
- School of Environment and Civil Engineering, Dongguan Cleaner Production Technology Center, Dongguan University of Technology, Dongguan 523808, China;
- Correspondence: (Z.C.); (G.T.)
| | - Tongchao Liu
- School of Environment and Civil Engineering, Dongguan Cleaner Production Technology Center, Dongguan University of Technology, Dongguan 523808, China;
- Shenzhen Key Laboratory of Polymer Science and Technology, College of Materials Science and Engineering, Shenzhen University, Shenzhen 518060, China;
| | - Chengjun Pan
- Shenzhen Key Laboratory of Polymer Science and Technology, College of Materials Science and Engineering, Shenzhen University, Shenzhen 518060, China;
| | - Guiping Tan
- School of Environment and Civil Engineering, Dongguan Cleaner Production Technology Center, Dongguan University of Technology, Dongguan 523808, China;
- Correspondence: (Z.C.); (G.T.)
| |
Collapse
|
30
|
Mardi S, Pea M, Notargiacomo A, Yaghoobi Nia N, Carlo AD, Reale A. The Molecular Weight Dependence of Thermoelectric Properties of Poly (3-Hexylthiophene). MATERIALS (BASEL, SWITZERLAND) 2020; 13:E1404. [PMID: 32204569 PMCID: PMC7142503 DOI: 10.3390/ma13061404] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/16/2020] [Revised: 03/12/2020] [Accepted: 03/16/2020] [Indexed: 11/17/2022]
Abstract
Organic materials have been found to be promising candidates for low-temperature thermoelectric applications. In particular, poly (3-hexylthiophene) (P3HT) has been attracting great interest due to its desirable intrinsic properties, such as excellent solution processability, chemical and thermal stability, and high field-effect mobility. However, its poor electrical conductivity has limited its application as a thermoelectric material. It is therefore important to improve the electrical conductivity of P3HT layers. In this work, we studied how molecular weight (MW) influences the thermoelectric properties of P3HT films. The films were doped with lithium bis(trifluoromethane sulfonyl) imide salt (LiTFSI) and 4-tert butylpyridine (TBP). Various P3HT layers with different MWs ranging from 21 to 94 kDa were investigated. UV-Vis spectroscopy and atomic force microscopy (AFM) analysis were performed to investigate the morphology and structure features of thin films with different MWs. The electrical conductivity initially increased when the MW increased and then decreased at the highest MW, whereas the Seebeck coefficient had a trend of reducing as the MW grew. The maximum thermoelectric power factor (1.87 μW/mK2) was obtained for MW of 77 kDa at 333 K. At this temperature, the electrical conductivity and Seebeck coefficient of this MW were 65.5 S/m and 169 μV/K, respectively.
Collapse
Affiliation(s)
- Saeed Mardi
- Department of Electronic Engineering, CHOSE—Centre for Hybrid and Organic Solar Energy, University of Rome Tor Vergata, via del Politecnico 1, 00133 Rome, Italy; (S.M.); (N.Y.N.); (A.D.C.)
| | - Marialilia Pea
- Institute for Photonics and Nanotechnologies, CNR, 00156 Rome, Italy; (M.P.); (A.N.)
| | - Andrea Notargiacomo
- Institute for Photonics and Nanotechnologies, CNR, 00156 Rome, Italy; (M.P.); (A.N.)
| | - Narges Yaghoobi Nia
- Department of Electronic Engineering, CHOSE—Centre for Hybrid and Organic Solar Energy, University of Rome Tor Vergata, via del Politecnico 1, 00133 Rome, Italy; (S.M.); (N.Y.N.); (A.D.C.)
| | - Aldo Di Carlo
- Department of Electronic Engineering, CHOSE—Centre for Hybrid and Organic Solar Energy, University of Rome Tor Vergata, via del Politecnico 1, 00133 Rome, Italy; (S.M.); (N.Y.N.); (A.D.C.)
| | - Andrea Reale
- Department of Electronic Engineering, CHOSE—Centre for Hybrid and Organic Solar Energy, University of Rome Tor Vergata, via del Politecnico 1, 00133 Rome, Italy; (S.M.); (N.Y.N.); (A.D.C.)
| |
Collapse
|
31
|
Shi J, Liu S, Zhang L, Yang B, Shu L, Yang Y, Ren M, Wang Y, Chen J, Chen W, Chai Y, Tao X. Smart Textile-Integrated Microelectronic Systems for Wearable Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1901958. [PMID: 31273850 DOI: 10.1002/adma.201901958] [Citation(s) in RCA: 186] [Impact Index Per Article: 46.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/28/2019] [Revised: 05/02/2019] [Indexed: 05/21/2023]
Abstract
The programmable nature of smart textiles makes them an indispensable part of an emerging new technology field. Smart textile-integrated microelectronic systems (STIMES), which combine microelectronics and technology such as artificial intelligence and augmented or virtual reality, have been intensively explored. A vast range of research activities have been reported. Many promising applications in healthcare, the internet of things (IoT), smart city management, robotics, etc., have been demonstrated around the world. A timely overview and comprehensive review of progress of this field in the last five years are provided. Several main aspects are covered: functional materials, major fabrication processes of smart textile components, functional devices, system architectures and heterogeneous integration, wearable applications in human and nonhuman-related areas, and the safety and security of STIMES. The major types of textile-integrated nonconventional functional devices are discussed in detail: sensors, actuators, displays, antennas, energy harvesters and their hybrids, batteries and supercapacitors, circuit boards, and memory devices.
Collapse
Affiliation(s)
- Jidong Shi
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong, 999077, China
| | - Su Liu
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong, 999077, China
| | - Lisha Zhang
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong, 999077, China
| | - Bao Yang
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong, 999077, China
| | - Lin Shu
- School of Electronic and Information Engineering, Southern China University of Technology, Guangzhou, 510640, Guangdong, China
| | - Ying Yang
- i-Lab, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Ming Ren
- i-Lab, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Yang Wang
- Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong, 999077, China
| | - Jiewei Chen
- Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong, 999077, China
| | - Wei Chen
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong, 999077, China
| | - Yang Chai
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong, 999077, China
- Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong, 999077, China
| | - Xiaoming Tao
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong, 999077, China
| |
Collapse
|
32
|
Surface Modification Design for Improving the Strength and Water Vapor Permeability of Waterborne Polymer/SiO 2 Composites: Molecular Simulation and Experimental Analyses. Polymers (Basel) 2020; 12:polym12010170. [PMID: 31936520 PMCID: PMC7023158 DOI: 10.3390/polym12010170] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2019] [Revised: 01/04/2020] [Accepted: 01/07/2020] [Indexed: 11/17/2022] Open
Abstract
Polymer-based nanocomposites properties are greatly affected by interfacial interaction. Polyacrylate nanocomposites have been widely studied, but few studies have been conducted on their interface mechanism. Therefore, there was an urgent demand for providing a thorough understanding of the polymethyl acrylate/SiO2 (PMA/SiO2) nanocomposites to obtain the desired macro-performance. In this paper, a methodology, which combined molecular dynamics simulation with experimental researches, was established to expound the effect of the surface structure of SiO2 particles which were treated with KH550, KH560 or KH570 (KH550-SiO2, KH560-SiO2 and KH570-SiO2) on the mechanical characteristic and water vapor permeability of polymethyl acrylate/SiO2 nanocomposites. The polymethyl acrylate/SiO2 nanocomposites were analyzed in binding energy and mean square displacement. The results indicate that PMA/KH570-SiO2 had the highest tensile strength, while PMA/KH550-SiO2 had the highest elongation at break at the same filler content; KH550-SiO2 spheres can significantly improve water vapor permeability of polyacrylate film.
Collapse
|
33
|
Park J, Lee Y, Kim M, Kim Y, Tripathi A, Kwon YW, Kwak J, Woo HY. Closely Packed Polypyrroles via Ionic Cross-Linking: Correlation of Molecular Structure-Morphology-Thermoelectric Properties. ACS APPLIED MATERIALS & INTERFACES 2020; 12:1110-1119. [PMID: 31825593 DOI: 10.1021/acsami.9b17009] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
A series of ionically interconnected polypyrrole (PPy) films are fabricated through two-monomer-connected-precursor polymerization by varying diacid linkers, thereby significantly influencing the crystalline morphology and electrical properties. The structure obtained using 1,5-napthalenedisulfonic acid (PPy-Nap) as a fused aromatic linker exhibits a higher electrical conductivity (∼78 S cm-1) than that (6.7 S cm-1) without a linker (PPy-ref). Cryogenic conductivity measurements reveal that the percolation carrier transport barrier of PPy-Nap is significantly smaller than that of PPy-ref, and the calculated carrier mobility of PPy-Nap is ∼5 times higher compared to PPy-ref. The carrier transport characteristics show a good agreement with morphological data by 2D grazing-incidence X-ray scattering. All PPys have similar doped charge carrier concentrations and, thus, similar Seebeck coefficients (5-8 μV K-1) but very different electrical conductivities. Consequently, PPy-Nap exhibits a higher power factor than that of PPy-ref (0.21 vs 0.043 μW m-1 K-2). The results show that the trade-off relationship between the Seebeck coefficient and electrical conductivity can be overcome by improving crystalline morphology and carrier transport. Thus, both the electrical conductivities and thermoelectric power factors can be improved with maintaining the Seebeck coefficients by enhancing the ordered conductive domains and carrier mobility while maintaining the doping level.
Collapse
Affiliation(s)
- Juhyung Park
- Department of Electrical and Computer Engineering, Inter-university Semiconductor Research Center , Seoul National University , Seoul 08826 , Republic of Korea
| | - Yeran Lee
- Department of Chemistry, College of Science , Korea University , Seoul 02841 , Republic of Korea
| | - Miso Kim
- Department of Chemistry, College of Science , Korea University , Seoul 02841 , Republic of Korea
| | - Yungeun Kim
- Department of Chemistry, College of Science , Korea University , Seoul 02841 , Republic of Korea
| | - Ayushi Tripathi
- Department of Chemistry, College of Science , Korea University , Seoul 02841 , Republic of Korea
| | - Young-Wan Kwon
- KU-KIST Graduate School of Converging Science and Technology , Korea University , Seoul 02841 , Republic of Korea
| | - Jeonghun Kwak
- Department of Electrical and Computer Engineering, Inter-university Semiconductor Research Center , Seoul National University , Seoul 08826 , Republic of Korea
| | - Han Young Woo
- Department of Chemistry, College of Science , Korea University , Seoul 02841 , Republic of Korea
| |
Collapse
|
34
|
Abstract
Thermoelectric (TE) material is a class of materials that can convert heat to electrical energy directly in a solid-state-device without any moving parts and that is environmentally friendly. The study and development of TE materials have grown quickly in the past decade. However, their development goes slowly by the lack of cheap TE materials with high Seebeck coefficient and good electrical conductivity. Carbon nanotubes (CNTs) are particularly attractive as TE materials because of at least three reasons: (1) CNTs possess various band gaps depending on their structure, (2) CNTs represent unique one-dimensional carbon materials which naturally satisfies the conditions of quantum confinement effect to enhance the TE efficiency and (3) CNTs provide us with a platform for developing lightweight and flexible TE devices due to their mechanical properties. The TE power factor is reported to reach 700–1000 W / m K 2 for both p-type and n-type CNTs when purified to contain only doped semiconducting CNT species. Therefore, CNTs are promising for a variety of TE applications in which the heat source is unlimited, such as waste heat or solar heat although their figure of merit Z T is still modest (0.05 at 300 K). In this paper, we review in detail from the basic concept of TE field to the fundamental TE properties of CNTs, as well as their applications. Furthermore, the strategies are discussed to improve the TE properties of CNTs. Finally, we give our perspectives on the tremendous potential of CNTs-based TE materials and composites.
Collapse
|
35
|
Hata S, Yanagawa Y, Oshima K, Tomotsu J, Du Y, Shiraishi Y, Toshima N. Highly-stable n-type Carbon Nanotube Material under Accelerated Aging Conditions: Conjunctive Effect of Hydrazine Derivatives and Commodity Polymers. CHEM LETT 2019. [DOI: 10.1246/cl.190407] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
Affiliation(s)
- Shinichi Hata
- Department of Applied Chemistry, Sanyo-Onoda City University, Sanyo-Onoda, Yamaguchi 756-0884, Japan
| | - Yuki Yanagawa
- Department of Applied Chemistry, Sanyo-Onoda City University, Sanyo-Onoda, Yamaguchi 756-0884, Japan
| | - Keisuke Oshima
- Graduate School of Engineering, Sanyo-Onoda City University, Sanyo-Onoda, Yamaguchi 756-0884, Japan
| | - Jin Tomotsu
- Department of Applied Chemistry, Sanyo-Onoda City University, Sanyo-Onoda, Yamaguchi 756-0884, Japan
| | - Yukou Du
- College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, P. R. China
| | - Yukihide Shiraishi
- Department of Applied Chemistry, Sanyo-Onoda City University, Sanyo-Onoda, Yamaguchi 756-0884, Japan
| | - Naoki Toshima
- Professor Emeritus, Tokyo University of Science Yamaguchi, Sanyo-Onoda, Yamaguchi 756-0884, Japan
| |
Collapse
|
36
|
Electrochemical Characterization of Mancozeb Degradation for Wastewater Treatment Using a Sensor Based on Poly (3,4-ethylenedioxythiophene) (PEDOT) Modified with Carbon Nanotubes and Gold Nanoparticles. Polymers (Basel) 2019; 11:polym11091449. [PMID: 31487849 PMCID: PMC6780876 DOI: 10.3390/polym11091449] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2019] [Revised: 08/18/2019] [Accepted: 08/30/2019] [Indexed: 01/03/2023] Open
Abstract
Mancozeb is a worldwide fungicide used on a large scale in agriculture. The active component and its main metabolite, ethylene thiourea, has been related to health issues. Robust, fast, and reliable methodologies to quantify its presence in water are of great importance for environmental and health reasons. The electrochemical evaluation of mancozeb using a low-cost electrochemical electrode modified with poly (3,4-ethylene dioxythiophene), multi-walled carbon nanotubes, and gold nanoparticles is a novel strategy to provide an in-situ response for water pollution from agriculture. Additionally, the thermal-, electrochemical-, and photo-degradation of mancozeb and the production of ethylene thiourea under controlled conditions were evaluated in this research. The mancozeb solutions were characterized by electrochemical oxidation and ultraviolet-visible spectrophotometry, and the ethylene thiourea concentration was measured using ultra-high-performance liquid chromatography high-resolution mass spectrometry. The degradation study of mancozeb may provide routes for treatment in wastewater treatment plants. Therefore, a low-cost electrochemical electrode was fabricated to detect mancozeb in water with a robust electrochemical response in the linear range as well as a quick response at a reduced volume. Hence, our novel modified electrode provides a potential technique to be used in environmental monitoring for pesticide detection.
Collapse
|
37
|
Liu Y, Dai Q, Zhou Y, Li B, Mao X, Gao C, Gao Y, Pan C, Jiang Q, Wu Y, Xie Y, Wang L. High-Performance N-Type Carbon Nanotube Composites: Improved Power Factor by Optimizing the Acridine Scaffold and Tailoring the Side Chains. ACS APPLIED MATERIALS & INTERFACES 2019; 11:29320-29329. [PMID: 31298832 DOI: 10.1021/acsami.9b10023] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Single-walled carbon nanotubes (SWCNTs)/organic small molecules (OSMs) are promising candidates for application in thermoelectric (TE) modules; however, the development of n-type SWCNT/OSMs with high performance is lagging behind. Only a few structure-activity relationships of OSMs on SWCNT composites have been reported. Recently, we find that the n-type acridone/SWCNT composites display high power factor (PF) values at high temperature but suffer from low PFs at room temperature. Here, the performance of SWCNT composites containing an acridine derivative (AD) as well as its analogues with different counterions (Cl-, SO42- and F-) and lengths of alkyl chains (ADLA1-2 and ADLA4-5) is reported. Among the composites, SWCNT/ADLA4 with no counterions exhibits the highest PF value of 195.2 μW m-1 K-2 at room temperature, which is 4.9 times higher than that of SWCNT/ADTAd (39.8 μW m-1 K-2), indicating that the acridine scaffold and the lengths of alkyl chains contribute to the dramatic changes in the TE performance. In addition, SWCNT/ADLA4 exhibits high PF values at all the temperatures we investigate, which range from 154.7 to 230.7 μW m-1 K-2. Furthermore, a TE device consisting of five pairs of p (the pristine SWCNTs)-n (SWCNT/ADLA4) junctions is assembled, generating a relatively high open-circuit voltage (41.7 mV) and an output power of 1.88 μW at a temperature difference of 74.8 K. Our results suggest that structural modifications might be an effective way to advance the development of TE materials.
Collapse
Affiliation(s)
| | - Qiuzi Dai
- Department of Chemistry , Tsinghua University , Beijing 100084 , PR China
| | | | | | | | | | | | | | - Qinglin Jiang
- Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices , South China University of Technology , Guangzhou 510640 , China
| | | | | | | |
Collapse
|
38
|
Modulating Carrier Type for Enhanced Thermoelectric Performance of Single-Walled Carbon Nanotubes/Polyethyleneimine Composites. Polymers (Basel) 2019; 11:polym11081295. [PMID: 31382416 PMCID: PMC6723296 DOI: 10.3390/polym11081295] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/01/2019] [Revised: 07/15/2019] [Accepted: 07/17/2019] [Indexed: 11/17/2022] Open
Abstract
Thermoelectric (TE) generators consisting of flexible and lightweight p- and n-type single-walled carbon nanotube (SWCNT)-based composites have potential applications in powering wearable electronics using the temperature difference between the human body and the environment. Tuning the TE properties of SWCNTs, particularly p- versus n-type control, is currently of significant interest. Herein, the TE properties of SWCNT-based flexible films consisting of SWCNTs doped with polyethyleneimine (PEI) were evaluated. The carrier type of the SWCNT/PEI composites was modulated by regulating the proportion of SWCNTs and PEI using simple mixing techniques. The as-prepared SWCNT/PEI composite films were switched from p- to n-type by the addition of a high amount of PEI (>13.0 wt.%). Moreover, interconnected SWCNTs networks were formed due to the excellent SWNT dispersion and film formation. These parameters were improved by the addition of PEI and Nafion, which facilitated effective carrier transport. A TE generator with three thermocouples of p- and n-type SWCNT/PEI flexible composite films delivered an open circuit voltage of 17 mV and a maximum output power of 224 nW at the temperature gradient of 50 K. These promising results showed that the flexible SWCNT/PEI composites have potential applications in wearable and autonomous devices.
Collapse
|
39
|
Wang Y, Yang L, Shi XL, Shi X, Chen L, Dargusch MS, Zou J, Chen ZG. Flexible Thermoelectric Materials and Generators: Challenges and Innovations. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2019; 31:e1807916. [PMID: 31148307 DOI: 10.1002/adma.201807916] [Citation(s) in RCA: 144] [Impact Index Per Article: 28.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/07/2018] [Revised: 04/03/2019] [Indexed: 05/20/2023]
Abstract
The urgent need for ecofriendly, stable, long-lifetime power sources is driving the booming market for miniaturized and integrated electronics, including wearable and medical implantable devices. Flexible thermoelectric materials and devices are receiving increasing attention, due to their capability to convert heat into electricity directly by conformably attaching them onto heat sources. Polymer-based flexible thermoelectric materials are particularly fascinating because of their intrinsic flexibility, affordability, and low toxicity. There are other promising alternatives including inorganic-based flexible thermoelectrics that have high energy-conversion efficiency, large power output, and stability at relatively high temperature. Herein, the state-of-the-art in the development of flexible thermoelectric materials and devices is summarized, including exploring the fundamentals behind the performance of flexible thermoelectric materials and devices by relating materials chemistry and physics to properties. By taking insights from carrier and phonon transport, the limitations of high-performance flexible thermoelectric materials and the underlying mechanisms associated with each optimization strategy are highlighted. Finally, the remaining challenges in flexible thermoelectric materials are discussed in conclusion, and suggestions and a framework to guide future development are provided, which may pave the way for a bright future for flexible thermoelectric devices in the energy market.
Collapse
Affiliation(s)
- Yuan Wang
- Centre for Future Materials, University of Southern Queensland, Springfield Central, Queensland, 4300, Australia
| | - Lei Yang
- School of Materials Science and Engineering, Sichuan University, Chengdu, 610064, China
| | - Xiao-Lei Shi
- Materials Engineering, University of Queensland, Brisbane, Queensland, 4072, Australia
| | - Xun Shi
- State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China
| | - Lidong Chen
- State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China
| | - Matthew S Dargusch
- Materials Engineering, University of Queensland, Brisbane, Queensland, 4072, Australia
- Centre for Advanced Materials Processing and, Manufacturing (AMPAM), the University of Queensland, Brisbane, Queensland, 4072, Australia
| | - Jin Zou
- Materials Engineering, University of Queensland, Brisbane, Queensland, 4072, Australia
- Centre for Microscopy and Microanalysis, University of Queensland, Brisbane, Queensland, 4072, Australia
| | - Zhi-Gang Chen
- Centre for Future Materials, University of Southern Queensland, Springfield Central, Queensland, 4300, Australia
- Materials Engineering, University of Queensland, Brisbane, Queensland, 4072, Australia
| |
Collapse
|
40
|
High performance n-type Ag 2Se film on nylon membrane for flexible thermoelectric power generator. Nat Commun 2019; 10:841. [PMID: 30783113 PMCID: PMC6381183 DOI: 10.1038/s41467-019-08835-5] [Citation(s) in RCA: 121] [Impact Index Per Article: 24.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2018] [Accepted: 02/01/2019] [Indexed: 11/09/2022] Open
Abstract
Researches on flexible thermoelectric materials usually focus on conducting polymers and conducting polymer-based composites; however, it is a great challenge to obtain high thermoelectric properties comparable to inorganic counterparts. Here, we report an n-type Ag2Se film on flexible nylon membrane with an ultrahigh power factor ~987.4 ± 104.1 μWm-1K-2 at 300 K and an excellent flexibility (93% of the original electrical conductivity retention after 1000 bending cycles around a 8-mm diameter rod). The flexibility is attributed to a synergetic effect of the nylon membrane and the Ag2Se film intertwined with numerous high-aspect-ratio Ag2Se grains. A thermoelectric prototype composed of 4-leg of the Ag2Se film generates a voltage and a maximum power of 18 mV and 460 nW, respectively, at a temperature difference of 30 K. This work opens opportunities of searching for high performance thermoelectric film for flexible thermoelectric devices.
Collapse
|
41
|
Zhang Y, Heo YJ, Park M, Park SJ. Recent Advances in Organic Thermoelectric Materials: Principle Mechanisms and Emerging Carbon-Based Green Energy Materials. Polymers (Basel) 2019; 11:E167. [PMID: 30960150 PMCID: PMC6401848 DOI: 10.3390/polym11010167] [Citation(s) in RCA: 59] [Impact Index Per Article: 11.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/24/2018] [Revised: 01/09/2019] [Accepted: 01/10/2019] [Indexed: 11/16/2022] Open
Abstract
Thermoelectric devices have recently attracted considerable interest owing to their unique ability of converting heat to electrical energy in an environmentally efficient manner. These devices are promising as alternative power generators for harvesting electrical energy compared to conventional batteries. Inorganic crystalline semiconductors have dominated the thermoelectric material fields; however, their application has been restricted by their intrinsic high toxicity, fragility, and high cost. In contrast, organic thermoelectric materials with low cost, low thermal conductivity, easy processing, and good flexibility are more suitable for fabricating thermoelectric devices. In this review, we briefly introduce the parameters affecting the thermoelectric performance and summarize the most recently developed carbon-material-based organic thermoelectric composites along with their preparation technologies, thermoelectric performance, and future applications. In addition, the p- and n-type carbon nanotube conversion and existing challenges are discussed. This review can help researchers in elucidating the recent studies on carbon-based organic thermoelectric materials, thus inspiring them to develop more efficient thermoelectric devices.
Collapse
Affiliation(s)
- Yinhang Zhang
- Department of Chemistry, Inha University, 100 Inharo, Incheon 22212, Korea.
| | - Young-Jung Heo
- Department of Chemistry, Inha University, 100 Inharo, Incheon 22212, Korea.
| | - Mira Park
- Department of Bioenvironmental Chemistry, College of Agriculture & Life Science, Chonbuk National University, Jeonju 54896, Korea.
| | - Soo-Jin Park
- Department of Chemistry, Inha University, 100 Inharo, Incheon 22212, Korea.
| |
Collapse
|
42
|
Wang X, Liu P, Jiang Q, Zhou W, Xu J, Liu J, Jia Y, Duan X, Liu Y, Du Y, Jiang F. Efficient DMSO-Vapor Annealing for Enhancing Thermoelectric Performance of PEDOT:PSS-Based Aerogel. ACS APPLIED MATERIALS & INTERFACES 2019; 11:2408-2417. [PMID: 30576122 DOI: 10.1021/acsami.8b19168] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Conducting polymer-based composite aerogel film is desired to be used as thermoelectric (TE) materials due to its good flexibility and ultralow thermal conductivity. Here, we proposed the simple freeze drying method to fabricate free-standing poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS)-based aerogel films without any crosslinker addition. The evolutions of morphology and TE performance were systemically investigated with various organic solvent addition. Furthermore, a series of the PEDOT:PSS/tellurium nanowires (Te-NWs) composite aerogel films was prepared, and the relationship between the structure and the charge-transport mechanism of the binary complex system was explored based on series and parallel models. Finally, an efficient dimethyl sulfoxide-vapor annealing was employed to further optimize the TE performance of PEDOT:PSS/Te-NWs composite aerogel films. The ZT value was estimated to be 2.0 × 10-2 at room temperature. On the basis of the flexibility and highly enhanced TE performance, a prototype TE generator consisting of p-type PEDOT:PSS/Te-NWs aerogel films and n-type carbon nanotube fibers as legs has been fabricated with an acceptable output power of 1.28 μW at a temperature gradient of 60 K, which could be potentially applied in wearable electronics.
Collapse
Affiliation(s)
- Xiaodong Wang
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
- Frontier Institute of Science and Technology , Xi'an Jiaotong University , Xi'an 710054 , China
| | - Peipei Liu
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
| | - Qinglin Jiang
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
| | - Weiqiang Zhou
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
| | - Jingkun Xu
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
- School of Chemistry and Molecular Engineering , Qingdao University of Science and Technology , Qingdao 266042 , Shandong , China
| | - Jing Liu
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
| | - Yanhua Jia
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
| | - Xuemin Duan
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
| | - Youfa Liu
- College of Chemistry, Chemical Engineering and Materials Science , Soochow University , Suzhou 215123 , China
| | - Yukou Du
- College of Chemistry, Chemical Engineering and Materials Science , Soochow University , Suzhou 215123 , China
| | - Fengxing Jiang
- Department of Physics , Jiangxi Science and Technology Normal University , Nanchang 330013 , China
- School of Chemistry and Molecular Engineering , Qingdao University of Science and Technology , Qingdao 266042 , Shandong , China
| |
Collapse
|
43
|
Jin Q, Jiang S, Zhao Y, Wang D, Qiu J, Tang DM, Tan J, Sun DM, Hou PX, Chen XQ, Tai K, Gao N, Liu C, Cheng HM, Jiang X. Flexible layer-structured Bi 2Te 3 thermoelectric on a carbon nanotube scaffold. NATURE MATERIALS 2019; 18:62-68. [PMID: 30455446 DOI: 10.1038/s41563-018-0217-z] [Citation(s) in RCA: 109] [Impact Index Per Article: 21.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/02/2018] [Accepted: 10/04/2018] [Indexed: 05/28/2023]
Abstract
Inorganic chalcogenides are traditional high-performance thermoelectric materials. However, they suffer from intrinsic brittleness and it is very difficult to obtain materials with both high thermoelectric ability and good flexibility. Here, we report a flexible thermoelectric material comprising highly ordered Bi2Te3 nanocrystals anchored on a single-walled carbon nanotube (SWCNT) network, where a crystallographic relationship exists between the Bi2Te3 <[Formula: see text]> orientation and SWCNT bundle axis. This material has a power factor of ~1,600 μW m-1 K-2 at room temperature, decreasing to 1,100 μW m-1 K-2 at 473 K. With a low in-plane lattice thermal conductivity of 0.26 ± 0.03 W m-1 K-1, a maximum thermoelectric figure of merit (ZT) of 0.89 at room temperature is achieved, originating from a strong phonon scattering effect. The origin of the excellent flexibility and thermoelectric performance of the Bi2Te3-SWCNT material is attributed, by experimental and computational evidence, to its crystal orientation, interface and nanopore structure. Our results provide insight into the design and fabrication of high-performance flexible thermoelectric materials.
Collapse
Affiliation(s)
- Qun Jin
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- University of Chinese Academy of Sciences, Shenyang, China
| | - Song Jiang
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- University of Chinese Academy of Sciences, Shenyang, China
- School of Physical Science and Technology, ShanghaiTech University, Shanghai, China
- State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai, China
| | - Yang Zhao
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
| | - Dong Wang
- Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, China
- State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing, China
| | - Jianhang Qiu
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
| | - Dai-Ming Tang
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
- World Premier International Center for Materials Nanoarchitectonics, National Institute for Materials Science, Tsukuba, Ibaraki, Japan
| | - Jun Tan
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
| | - Dong-Ming Sun
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
| | - Peng-Xiang Hou
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
| | - Xing-Qiu Chen
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
| | - Kaiping Tai
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China.
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China.
| | - Ning Gao
- Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, China.
| | - Chang Liu
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China.
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China.
| | - Hui-Ming Cheng
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- School of Physical Science and Technology, ShanghaiTech University, Shanghai, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
- Tsinghua-Berkeley Shenzhen Institute, Tsinghua University, Shenzhen, China
| | - Xin Jiang
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
- Department of Materials Science and Engineering, University of Science and Technology of China, Shenyang, China
- Institute of Materials Engineering, University of Siegen, Siegen, Germany
| |
Collapse
|
44
|
Carbon Nanotube-Based Organic Thermoelectric Materials for Energy Harvesting. Polymers (Basel) 2018; 10:polym10111196. [PMID: 30961121 PMCID: PMC6290613 DOI: 10.3390/polym10111196] [Citation(s) in RCA: 53] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2018] [Revised: 10/22/2018] [Accepted: 10/23/2018] [Indexed: 11/17/2022] Open
Abstract
Carbon nanotubes (CNTs) have attracted much attention in developing high-performance, low-cost, flexible thermoelectric (TE) materials because of their great electrical and mechanical properties. Theory predicts that one-dimensional semiconductors have natural advantages in TE fields. During the past few decades, remarkable progress has been achieved in both theory and experiments. What is more important is that CNTs have shown desirable features for either n-type or p-type TE properties through specific strategies. Up to now, CNT‒polymer hybrids have held the record for TE performance in organic materials, which means they can potentially be used in high-performance TE applications and flexible electronic devices. In this review, we intend to focus on the intrinsic TE properties of both n-type and p-type CNTs and effective TE enhanced strategies. Furthermore, the current trends for developing CNT-based and CNT‒polymer-based high TE performance organic materials are discussed, followed by an overview of the relevant electronic structure‒TE property relationship. Finally, models for evaluating the TE properties are provided and a few representative samples of CNT‒polymer composites with high TE performance are highlighted.
Collapse
|
45
|
Preparation and Thermoelectric Properties of Graphite/poly(3,4-ethyenedioxythiophene) Nanocomposites. ENERGIES 2018. [DOI: 10.3390/en11102849] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
Abstract
Graphite/poly(3,4-ethyenedioxythiophene) (PEDOT) nanocomposites were prepared by an in-situ oxidative polymerization process. The electrical conductivity and Seebeck coefficient of the graphite/PEDOT nanocomposites with different content of graphite were measured in the temperature range from 300 K to 380 K. The results show that as the content of graphite increased from 0 to 37.2 wt %, the electrical conductivity of the nanocomposites increased sharply from 3.6 S/cm to 80.1 S/cm, while the Seebeck coefficient kept almost the same value (in the range between 12.0 μV/K to 15.1 μV/K) at 300 K, which lead to an increased power factor. The Seebeck coefficient of the nanocomposites increased from 300 K to 380 K, while the electrical conductivity did not substantially depend on the measurement temperature. As a result, a power factor of 3.2 μWm−1 K−2 at 380 K was obtained for the nanocomposites with 37.2 wt % graphite.
Collapse
|
46
|
Shi W, Wu G, Hippalgaonkar K, Wang JS, Xu J, Yang SW. Poly(nickel-ethylenetetrathiolate) and Its Analogs: Theoretical Prediction of High-Performance Doping-Free Thermoelectric Polymers. J Am Chem Soc 2018; 140:13200-13204. [DOI: 10.1021/jacs.8b08270] [Citation(s) in RCA: 33] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Affiliation(s)
- Wen Shi
- Institute of High Performance Computing, Agency for Science, Technology and Research, 1 Fusionopolis Way, #16-16 Connexis, Singapore 138632, Republic of Singapore
| | - Gang Wu
- Institute of High Performance Computing, Agency for Science, Technology and Research, 1 Fusionopolis Way, #16-16 Connexis, Singapore 138632, Republic of Singapore
| | - Kedar Hippalgaonkar
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research, 2 Fusionopolis Way, #08-03 Innovis, Singapore 138634, Republic of Singapore
- School of Materials Science & Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Republic of Singapore
| | - Jian-Sheng Wang
- Department of Physics, National University of Singapore, 21 Lower Kent Ridge Road, Singapore 117551, Republic of Singapore
| | - Jianwei Xu
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research, 2 Fusionopolis Way, #08-03 Innovis, Singapore 138634, Republic of Singapore
| | - Shuo-Wang Yang
- Institute of High Performance Computing, Agency for Science, Technology and Research, 1 Fusionopolis Way, #16-16 Connexis, Singapore 138632, Republic of Singapore
| |
Collapse
|
47
|
Choi K, Kim SL, Yi SI, Hsu JH, Yu C. Promoting Dual Electronic and Ionic Transport in PEDOT by Embedding Carbon Nanotubes for Large Thermoelectric Responses. ACS APPLIED MATERIALS & INTERFACES 2018; 10:23891-23899. [PMID: 29947512 DOI: 10.1021/acsami.8b06850] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Thermoelectric (TE) energy conversion with nontraditional organic materials is promising in wearable electronics and roll-to-roll manufacturing because of mechanical flexibility, lightweight, and easy processing. Although typical organic materials have a benefit of low thermal conductivity that creates a large temperature gradient, relatively small thermopower (or Seebeck coefficient) often requires copious number of TE legs to fabricate practical TE devices. Here, we show that hybrids of poly(3,4-ethylenedioxythiophene)-tosylate (PEDOT-Tos) and carbon nanotubes (CNTs) can produce extremely large thermopower, ∼14 mV/K at room temperature by a chemical reduction. With decent electrical conductivity, an extraordinary power factor of ∼1200 μW/m K2 at room temperature was observed. The large power factor could be attributed to prominent dual electronic and ionic conduction, which is likely to be promoted by embedding the CNTs in PEDOT due to the improvement in the carrier mobility, in comparison with the inferior and widely varying TE properties of PEDOT-only samples in the literature. While a higher CNT concentration gave a larger electronic contribution, a longer reduction or a lower CNT concentration provided a larger ionic contribution. Meanwhile, well-separated CNTs created CNT junctions intervened by PEDOT-Tos, suppressing the thermal transport. Further research utilizing the high TE responses could greatly help to develop practical wearable and/or mass-producible thermal energy harvesting and storage devices.
Collapse
Affiliation(s)
- Kyungwho Choi
- New Transportation Innovative Research Center , Korea Railroad Research Institute , Uiwang-si , Gyeonggi-do , 16105 Korea
| | | | | | | | | |
Collapse
|
48
|
Liu J, Qiu L, Portale G, Koopmans M, Ten Brink G, Hummelen JC, Koster LJA. N-Type Organic Thermoelectrics: Improved Power Factor by Tailoring Host-Dopant Miscibility. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2017; 29:1701641. [PMID: 28722288 DOI: 10.1002/adma.201701641] [Citation(s) in RCA: 55] [Impact Index Per Article: 7.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/23/2017] [Revised: 05/22/2017] [Indexed: 05/23/2023]
Abstract
In this contribution, for the first time, the polarity of fullerene derivatives is tailored to enhance the miscibility between the host and dopant molecules. A fullerene derivative with a hydrophilic triethylene glycol type side chain (PTEG-1) is used as the host and (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine n-DMBI) as the dopant. Thereby, the doping efficiency can be greatly improved to around 18% (<1% for a nonpolar reference sample) with optimized electrical conductivity of 2.05 S cm-1 , which represents the best result for solution-processed fullerene derivatives. An in-depth microstructural study indicates that the PTEG-1 molecules readily form layered structures parallel to the substrate after solution processing. The fullerene cage plane is alternated by the triethylene glycol side chain plane; the n-DMBI dopants are mainly incorporated in the side chain plane without disturbing the π-π packing of PTEG-1. This new microstructure, which is rarely observed for codeposited thin films from solution, formed by PTEG-1 and n-DMBI molecules explains the increased miscibility of the host/dopant system at a nanoscale level and the high electrical conductivity. Finally, a power factor of 16.7 µW m-1 K-2 is achieved at 40% dopant concentration. This work introduces a new strategy for improving the conductivity of solution-processed n-type organic thermoelectrics.
Collapse
Affiliation(s)
- Jian Liu
- Zernike Institute for Advanced Materials, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
| | - Li Qiu
- Zernike Institute for Advanced Materials, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
- Stratingh Institute for Chemistry, University of Groningen, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
| | - Giuseppe Portale
- Zernike Institute for Advanced Materials, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
| | - Marten Koopmans
- Zernike Institute for Advanced Materials, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
| | - Gert Ten Brink
- Zernike Institute for Advanced Materials, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
| | - Jan C Hummelen
- Zernike Institute for Advanced Materials, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
- Stratingh Institute for Chemistry, University of Groningen, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
| | - L Jan Anton Koster
- Zernike Institute for Advanced Materials, Nijenborgh 4, NL-9747, AG, Groningen, The Netherlands
| |
Collapse
|
49
|
Wu G, Zhang ZG, Li Y, Gao C, Wang X, Chen G. Exploring High-Performance n-Type Thermoelectric Composites Using Amino-Substituted Rylene Dimides and Carbon Nanotubes. ACS NANO 2017; 11:5746-5752. [PMID: 28511002 DOI: 10.1021/acsnano.7b01279] [Citation(s) in RCA: 44] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Taking advantage of the high electrical conductivity of a single-walled carbon nanotube (SWCNT) and the large Seebeck coefficient of rylene diimide, a convenient strategy is proposed to achieve high-performance n-type thermoelectric (TE) composites containing a SWCNT and amino-substituted perylene diimide (PDINE) or naphthalene diimide (NDINE). The obtained n-type composites display greatly enhanced TE performance with maximum power factors of 112 ± 8 (PDINE/SWCNT) and 135 ± 14 (NDINE/SWCNT) μW m-1 K-2. A short doping time of 0.5 h can ensure high TE performance. The corresponding TE module consisting of five p-n junctions reaches a large output power of 3.3 μW under a 50 °C temperature gradient. In addition, the n-type composites exhibit high air stability and excellent thermal stability. This design strategy benefits the future fabricating of high-performance n-type TE materials and devices.
Collapse
Affiliation(s)
- Guangbao Wu
- Institute of Chemistry, Chinese Academy of Sciences , Beijing 100190, P. R. China
- Key Laboratory of Rubber-Plastics, Ministry of Education, Qingdao University of Science and Technology, Qingdao 266042, P. R. China
| | - Zhi-Guo Zhang
- Institute of Chemistry, Chinese Academy of Sciences , Beijing 100190, P. R. China
| | - Yongfang Li
- Institute of Chemistry, Chinese Academy of Sciences , Beijing 100190, P. R. China
| | - Caiyan Gao
- Institute of Chemistry, Chinese Academy of Sciences , Beijing 100190, P. R. China
| | - Xin Wang
- Key Laboratory of Rubber-Plastics, Ministry of Education, Qingdao University of Science and Technology, Qingdao 266042, P. R. China
| | - Guangming Chen
- Institute of Chemistry, Chinese Academy of Sciences , Beijing 100190, P. R. China
| |
Collapse
|
50
|
Zhou W, Fan Q, Zhang Q, Cai L, Li K, Gu X, Yang F, Zhang N, Wang Y, Liu H, Zhou W, Xie S. High-performance and compact-designed flexible thermoelectric modules enabled by a reticulate carbon nanotube architecture. Nat Commun 2017; 8:14886. [PMID: 28337987 PMCID: PMC5477522 DOI: 10.1038/ncomms14886] [Citation(s) in RCA: 90] [Impact Index Per Article: 12.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2016] [Accepted: 02/08/2017] [Indexed: 01/31/2023] Open
Abstract
It is a great challenge to substantially improve the practical performance of flexible thermoelectric modules due to the absence of air-stable n-type thermoelectric materials with high-power factor. Here an excellent flexible n-type thermoelectric film is developed, which can be conveniently and rapidly prepared based on the as-grown carbon nanotube continuous networks with high conductivity. The optimum n-type film exhibits ultrahigh power factor of ∼1,500 μW m−1 K−2 and outstanding stability in air without encapsulation. Inspired by the findings, we design and successfully fabricate the compact-configuration flexible TE modules, which own great advantages compared with the conventional π-type configuration modules and well integrate the superior thermoelectric properties of p-type and n-type carbon nanotube films resulting in a markedly high performance. Moreover, the research results are highly scalable and also open opportunities for the large-scale production of flexible thermoelectric modules. Thermoelectric modules can generate electricity directly from heat and have applications to waste heat-energy conversion. Here Zhou et al. have fabricated a thermoelectric module based on an air-stable n-type single-walled carbon nanotube sheet which can reach a high power factor of 1500 μWm−1K−2.
Collapse
Affiliation(s)
- Wenbin Zhou
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China
| | - Qingxia Fan
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China
| | - Qiang Zhang
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China
| | - Le Cai
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China
| | - Kewei Li
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China
| | - Xiaogang Gu
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China.,University of Chinese Academy of Sciences, Beijing 100049, China
| | - Feng Yang
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China.,University of Chinese Academy of Sciences, Beijing 100049, China
| | - Nan Zhang
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China
| | - Yanchun Wang
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China.,University of Chinese Academy of Sciences, Beijing 100049, China
| | - Huaping Liu
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China.,University of Chinese Academy of Sciences, Beijing 100049, China
| | - Weiya Zhou
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China.,University of Chinese Academy of Sciences, Beijing 100049, China
| | - Sishen Xie
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.,Beijing Key Laboratory for Advanced Functional Materials and Structure Research, Beijing 100190, China.,University of Chinese Academy of Sciences, Beijing 100049, China
| |
Collapse
|