Stretchable Hydrogel Electronics and Devices

Hydronium-Crosslinked Inorganic Hydrogel Comprised of 1D Lepidocrocite Titanate Nanofilaments

When a few drops of acid (hydrochloric, acrylic, propionic, acetic, or formic) are added to a colloid comprised of 1D lepidocrocite titanate nanofilaments (1DLs)-2 × 2 TiO6 octahedra in cross-section-a hydrogel forms, in many cases, within seconds. The 1DL synthesis process requires the reaction between titanium diboride with tetramethylammonium (TMA+), hydroxide. Using quantitative nuclear magnetic resonance (qNMR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC), the mass percent of TMA+ after synthesis is determined to be ≈ 13.1 ± 0.1%. The TMA+ is completely removed from the gels after 2 water soak cycles, resulting in the first completely inorganic, TiO2-based hydrogels. Ion exchanging the TMA+ with hydronium results in gels with relatively strong hydrogen bonds. The hydrogels' compression strengths increased linearly with 1DL colloid concentration. At a 1DL concentration of 45 g L-1, the compressive strength, at 80% deformation when acrylic acid is used, is ≈325 kPa. The strengths are ≈ 50% greater after the TMA+ is removed. The removal of all residual organic components in the hydrogels, including TMA+, is confirmed by qNMR, Fourier-transformed infrared spectroscopy (FTIR), and TGA/DSC. The 1DL phase is retained after gelation, TMA+ removal, and 80% compression.

A bio-feedback-mimicking electrode combining real-time monitoring and drug delivery

Effective disease management based on real-time physiological changes presents a significant clinical challenge. A flexible electrode system integrating diagnosis and treatment can overcome the uncertainties associated with treatment progress during localized interventions. In this study, we develop a system featuring a biomimetic feedback regulation mechanism for drug delivery and real-time monitoring. To prevent drug leakage, the system incorporates a magnesium (Mg) valve in the outer layer, ensuring zero leakage when drug release is not required. The middle layer contains a drug-laden poly(3,4-ethylenedioxythiophene) (PEDOT) sponge (P-sponge), which supplies the water to partially or fully activate the Mg valve under electrical stimulation and initiate drug release. Once the valve is fully opened, the exposed and expanded P-sponge electrode establishes excellent contact with various tissues, facilitating the collection of electrophysiological signals. Encapsulation with polylactic acid film ensures the system's flexibility and bioresorbability, thereby minimizing potential side effects on surrounding tissues. Animal experiments demonstrate the system's capability to mimic feedback modulation mechanisms, enabling real-time monitoring and timely drug administration. This integrated diagnosis and treatment system offers an effective solution for the emergency management of acute diseases in clinical settings.

Octopus-Inspired Adhesives with Switchable Attachment to Challenging Underwater Surfaces

Adhesives that excel in wet or underwater environments are critical for applications ranging from healthcare and underwater robotics to infrastructure repair. However, achieving strong attachment and controlled release on difficult substrates, such as those that are curved, rough, or located in diverse fluid environments, remains a major challenge. Here, an octopus-inspired adhesive with strong attachment and rapid release in challenging underwater environments is presented. Inspired by the octopus's infundibulum structure, a compliant, curved stalk, and an active deformable membrane for multi-surface adhesion are utilized. The stalk's curved shape enhances conformal contact on large-scale curvatures and increases contact stress for adaptability to small-scale roughness. These synergistic mechanisms improve contact across multiple length scales, resulting in switching ratios of over 1000 within ≈30 ms with consistent attachment strength of over 60 kPa on diverse surfaces and conditions. These adhesives are demonstrated through the robust attachment and precise manipulation of rough underwater objects.

A Review of Conductive Hydrogel-Based Wearable Temperature Sensors

Conductive hydrogel has garnered significant attention as an emergent candidate for diverse wearable sensors, owing to its remarkable and tailorable properties such as flexibility, biocompatibility, and strong electrical conductivity. These attributes make it highly suitable for various wearable sensor applications (e.g., biophysical, bioelectrical, and biochemical sensors) that can monitor human health conditions and provide timely interventions. Among these applications, conductive hydrogel-based wearable temperature sensors are especially important for healthcare and disease surveillance. This review aims to provide a comprehensive overview of conductive hydrogel-based wearable temperature sensors. First, this work summarizes different types of conductive fillers-based hydrogel, highlighting their recent developments and advantages as wearable temperature sensors. Next, this work discusses the sensing characteristics of conductive hydrogel-based wearable temperature sensors, focusing on sensitivity, dynamic stability, stretchability, and signal output. Then, state-of-the-art applications are introduced, ranging from body temperature detection and wound temperature detection to disease monitoring. Finally, this work identifies the remaining challenges and prospects facing this field. By addressing these challenges with potential solutions, this review hopes to shed some light on future research and innovations in this promising field.

From lab to wearables: Innovations in multifunctional hydrogel chemistry for next-generation bioelectronic devices

Functional hydrogels have emerged as foundational materials in diagnostics, therapy, and wearable devices, owing to their high stretchability, flexibility, sensing, and outstanding biocompatibility. Their significance stems from their resemblance to biological tissue and their exceptional versatility in electrical, mechanical, and biofunctional engineering, positioning themselves as a bridge between living organisms and electronic systems, paving the way for the development of highly compatible, efficient, and stable interfaces. These multifaceted capability revolutionizes the essence of hydrogel-based wearable devices, distinguishing them from conventional biomedical devices in real-world practical applications. In this comprehensive review, we first discuss the fundamental chemistry of hydrogels, elucidating their distinct properties and functionalities. Subsequently, we examine the applications of these bioelectronics within the human body, unveiling their transformative potential in diagnostics, therapy, and human-machine interfaces (HMI) in real wearable bioelectronics. This exploration serves as a scientific compass for researchers navigating the interdisciplinary landscape of chemistry, materials science, and bioelectronics.

Direct Ink Writing of Liquid Metal on Hydrogel through Oxides Introduction

Hydrogel-based flexible electronics have been widely investigated in electronic skin and wearable sensors. However, the challenge of matching the modulus between the hydrogel and the electrode underscores the critical importance of flexibility of the electrode. Gallium-based liquid metals (GaLMs) are ideal electrode materials for flexible substrates due to their high conductivity and stretchability. However, the ease of aggregation and lack of adhesion happen when patterning GaLMs on hydrogel surfaces. This work proposes a direct ink writing (DIW) of highly oxidized EGaIn (hoEGaIn) on an acrylamide (AAm) hydrogel. The interface is modulated by increasing the oxide content to improve the printability. Compared to EGaIn with an oxide layer, hoEGaIn displays a lower surface tension dropped by about 28.5%, higher adhesion (an increase of about 24.4%), and lower contact angles. These optimized interface properties significantly improve its wettability and DIW stability on AAm hydrogel substrates. A minimum line width of 65 μm is obtained by regulating DIW parameters. Meanwhile, hoEGaIn exhibits impressive multisubstrate printability and conductivity of up to 2.22 × 106 S·m-1. Furthermore, a cantilever beam strain sensor is manufactured by DIW hoEGaIn on an AAm hydrogel, which exhibits fast response and recovery, excellent dynamic response, and stability. This study demonstrates a potential method for the DIW of GaLMs on hydrogels.

Wearable dual-drug controlled release patch for psoriasis treatment

Wearable drug delivery systems (DDS) have made significant advancements in the field of precision medicine, offering precise regulation of drug dosage, location, and timing. The performance qualities that wearable DDS has always strived for are simplicity, efficiency, and intelligence. This paper proposes a wearable dual-drug synergistic release patch. The patch is powered by a built-in magnesium battery and utilizes a hydrogel containing viologen-based hyperbranched polyamidoamine as both a cathode material and an integrated drug reservoir. This design allows for the simultaneous release of both dexamethasone and tannic acid, overcoming the limitations of monotherapy and ensuring effective synergy for on-demand therapy. In a mouse model with praziquimod-induced psoriasis, the patch demonstrated therapeutic efficacy at a low voltage. The inflammatory skin returned to normal after 5 days with the on-demand release of dual drugs. This work provides a promising treatment option considering its straightforward construction and the therapeutic advantages of dual-drug synergy.

Electronic Skin for Health Monitoring Systems: Properties, Functions, and Applications

Electronic skin (e-skin), a skin-like wearable electronic device, holds great promise in the fields of telemedicine and personalized healthcare because of its good flexibility, biocompatibility, skin conformability, and sensing performance. E-skin can monitor various health indicators of the human body in real time and over the long term, including physical indicators (exercise, respiration, blood pressure, etc.) and chemical indicators (saliva, sweat, urine, etc.). In recent years, the development of various materials, analysis, and manufacturing technologies has promoted significant development of e-skin, laying the foundation for the application of next-generation wearable medical technologies and devices. Herein, the properties required for e-skin health monitoring devices to achieve long-term and precise monitoring and summarize several detectable indicators in the health monitoring field are discussed. Subsequently, the applications of integrated e-skin health monitoring systems are reviewed. Finally, current challenges and future development directions in this field are discussed. This review is expected to generate great interest and inspiration for the development and improvement of e-skin and health monitoring systems.

Novel Biomaterials for Wound Healing and Tissue Regeneration

Skin is the first defense barrier of the human body, which can resist the invasion of external dust, microorganisms and other pollutants, and ensure that the human body maintains the homeostasis of the internal environment. Once the skin is damaged, the health threat to the human body will increase. Wound repair and the human internal environment are a dynamic process. How to effectively accelerate the healing of wounds without affecting the internal environment of the human body and guarantee that the repaired tissue retains its original function as much as possible has become a research hotspot. With the advancement of technology, researchers have combined new technologies to develop and prepare various types of materials for wound healing. This article will introduce the wound repair materials developed and prepared in recent years from three types: nanofibers, composite hydrogels, and other new materials. The paper aims to provide reference for researchers in related fields to develop and prepare multifunctional materials. This may be helpful to design more ideal materials for clinical application, and then achieve better wound healing and regeneration effects.

Unique stick-slip crack dynamics of double-network hydrogels under pure-shear loading

In this work, we have found that a prenotched double-network (DN) hydrogel, when subjected to tensile loading in a pure-shear geometry, exhibits intriguing stick-slip crack dynamics. These dynamics synchronize with the oscillation of the damage (yielding) zone at the crack tip. Through manipulation of the loading rate and the predamage level of the brittle network in DN gels, we have clarified that this phenomenon stems from the significant amount of energy dissipation required to form the damage zone at the crack tip, as well as a kinetic contrast between the rapid crack extension through the yielding zone (slip process) and the slow formation of a new yielding zone controlled by the external loading rate (stick process).

Highly stretchable dynamic hydrogels for soft multilayer electronics

Recent progress in the development of synthetic polymer networks has enabled the next generation of hydrogel-based machines and devices. The ability to mimic the mechanical and electrical properties of human tissue gives great potential toward the fields of bioelectronics and soft robotics. However, fabricating hydrogel devices that display high ionic conductivity while maintaining high stretchability and softness remains unmet. Here, we synthesize supramolecular poly(ionic) networks, which display high stretchability (>1500%), compressibility (>90%), and rapid self-recovery (<30 s), while achieving ionic conductivities of up to 0.1 S cm -1. Dynamic cross-links give rise to inter-layer adhesion and a stable interface is formed on account of ultrahigh binding affinities (>1013 M-2). Superior adherence between layers enabled the fabrication of an intrinsically stretchable hydrogel power source, paving the way for the next generation of multi-layer tissue mimetic devices.

Tough and elastic hydrogels based on robust hydrophobicity-assisted metal ion coordination for flexible wearable devices

Flexible wearable sensors that combine excellent flexibility, high elasticity, sensing capabilities, and outstanding biocompatibility are gaining increasing attention. In this study, we successfully develop a robust and elastic hydrogel-based flexible wearable sensor by modulating molecular structures combined with metal ion coordination. We leverage three N-acryloyl amino acid monomers, including N-acryloyl glycine (AG), N-acryloyl alanine (AA), and N-acryloyl valine (AV) with different hydrophobic groups adjacent to the carboxyl group, to copolymerize with acrylamide (AM) in the presence of Zr4+ for hydrogel preparation in one step (P(AM3-AG/AA/AV0.06)-Zr0.034+ hydrogels). Our investigation reveals that the P(AM3-AV0.06)-Zr0.034+ hydrogel with the most hydrophobic side group demonstrates superior mechanical properties (1.1 MPa tensile stress, 3566 kJ m-3 toughness and 1.3 kJ m-2 fracture energy) and resilience to multiple tensile (30% strain, 500 cycles) and compression cycling (50% strain, 500 cycles). Moreover, the P(AM3-AV0.06)-Zr0.034+ hydrogel exhibits good biocompatibility and high conductivity (1.1 S m-1) and responsivity (GF = 16.21), and is proved to be suitable as a flexible wearable sensor for comprehensive human activity monitoring.

Continuous and Controllable Preparation of Sodium Alginate Hydrogel Tubes Guided by the Soft Cap Inspired by the Apical Growth of the Plant

Hydrogel tubes made of sodium alginate (SA) have potential applications in drug delivery, soft robots, biomimetic blood vessels, tissue stents, and other fields. However, the continuous preparation of hollow SA hydrogel tubes with good stability and size control remains a huge challenge for chemists, material scientists, and medical practitioners. Inspired by the plant apical growth strategy, a new method named soft cap-guided growth was proposed to produce SA hydrogel tubes. Due to the introduction of inert low gravity substances, such as air and heptane, into the extrusion needle in front of calcium chloride solution to form a soft cap, the SA hydrogel tubes with controllable sizes were fabricated rapidly and continuously without using a template through a negative gravitropism mechanism. The SA hydrogel tubes had good tensile strength, high burst pressure, and good cell compatibility. In addition, hydrogel tubes with complex patterns were conveniently created by controlling the motion path of a soft cap, such as a rotating SA bath or magnetic force. Our research provided a simple innovative technique to steer the growth of hydrogel tubes, which made it possible to mass produce hydrogel tubes with controllable sizes and programmable patterns.

Low hysteresis zwitterionic supramolecular polymer ion-conductive elastomers with anti-freezing properties, high stretchability, and self-adhesion for flexible electronic devices

The fabrication of stretchable ionic conductors with low hysteresis and anti-freezing properties to enhance the durability and reliability of flexible electronics even at low temperatures remains an unmet challenge. Here, we report a facile strategy to fabricate low hysteresis, high stretchability, self-adhesion and anti-freezing zwitterionic supramolecular polymer ion-conductive elastomers (ICEs) by photoinitiated polymerization of aqueous precursor solutions containing a newly designed zwitterionic monomer carboxybetaine ureido acrylate (CBUIA) followed by solvent evaporation. The resultant poly(carboxybetaine ureido acrylate) (PCBUIA) ICEs are highly stretchable and self-adhesive owing to the presence of strong hydrogen bonds between ureido groups and dipole-dipole interactions of zwitterions. The zwitterion groups on the polymer side chains and loaded-lithium chloride endow PCBUIA ICEs with excellent anti-freezing properties, demonstrating mechanical flexibility and ionic transport properties even at a low temperature (-20 °C). Remarkably, the PCBUIA ICEs demonstrate a low hysteresis (≈10%) during cyclic mechanical loading-unloading (≤500%), and are successfully applied as wearable strain sensors and triboelectric nanogenerators (TENGs) for energy harvesting and human motion monitoring. In addition, the PCBUIA ICE-based TENG was used as a wireless sensing terminal for Internet of Things smart devices to enable wireless sensing of finger motion state detection.

Facile preparation of highly adhesive yet ultra-strong poly (vinyl alcohol)/cellulose nanocrystals composite hydrogel enabled by multiple networks structure

Poly (vinyl alcohol) (PVA) hydrogel showed potential applications in bioengineering and wearable sensors fields. It is still a huge challenge to prepare highly adhesive yet strong poly (vinyl alcohol) hydrogel with good biocompatibility. Herein, we prepared a highly self-adhesive and strong poly (vinyl alcohol)/tannic acid@cellulose nanocrystals (PVA/TA@CNCs) composite hydrogel using TA@CNCs as functional nanofiller via facile freezing-thawing method. Multiple networks consisting of hydrogen bonding and coordination interactions endowed the hydrogel with high mechanical strength, excellent flexibility and fracture toughness with adequate energy dissipation mechanism and relatively dense network structure. The tensile strength of PVA/TA@CNCs hydrogel reached the maximum of 463 kPa, increasing by 367 % in comparison with pure PVA hydrogel (99 kPa), demonstrating the synergistic reinforcing and toughening effect of TA@CNCs. The hydrogel exhibited extremely high adhesion not only for various dry and wet substrates such as plastic, metal, Teflon, rubber, glass, leaf, but also sweaty human skin, showing good adhesion durability. The highest adhesion strength to silicone rubber, steel plate and pigskin could reach 197 kPa, 100 kPa and 46.9 kPa, respectively. Meanwhile the hydrogel had negligible cytotoxicity to cells and showed good biocompatibility.

Multifunctional Nanocomposite Yield-Stress Fluids for Printable and Stretchable Electronics

Compliant materials are crucial for stretchable electronics. Stretchable solids and gels have limitations in deformability and durability, whereas active liquids struggle to create complex devices. This study presents multifunctional yield-stress fluids as printable ink materials to construct stretchable electronic devices. Ionic nanocomposites comprise silica nanoparticles and ion liquids, while electrical nanocomposites use the natural oxidation of liquid metals to produce gallium oxide nanoflake additives. These nanocomposite inks can be printed on an elastomer substrate and stay in a solid state for easy encapsulation. However, their transition into a liquid state during stretching allows ultrahigh deformability up to the fracture strain of the elastomer. The ionic inks produce strain sensors with high stretchability and temperature sensors with high sensitivity of 7% °C-1. Smart gloves are further created by integrating these sensors with printed electrical interconnects, demonstrating bimodal detection of temperatures and hand gestures. The nanocomposite yield-stress fluids combine the desirable qualities of solids and liquids for stretchable devices and systems.

Preparation of patterned hydrogels for anti-counterfeiting and directional actuation by shear-induced orientation of cellulose nanocrystals

Hydrogels with anisotropic structures are of great interest in the fields of bionic actuators, sensing and anti-counterfeiting due to their unique optical and stimulus response properties. Here we report an anisotropic cellulose nanocrystals/polyacrylamide (CNC/PAM) hydrogel with a patterned structure obtained by shear-induced orientation of CNC in precursor solution. Due to the difference in affinity between different slider surfaces and the precursor, patterned structures with different interference colors were realized by adhering the polypropylene (PP) film with a specific pattern to the bottom glass slider, which leads to differences in CNC orientation in different areas. These interfere color patterns can only be observed between crossed polarization, allowing the hydrogel to be used in applications of anti-counterfeiting and information encryption. Moreover, a complex and controllable 3D deformation is realized by introducing "zebra crossing" structure in the hydrogel. The opening and closing processes of flowers are vividly mimicked using the reversible swelling and shrinking properties of hydrogels in water and salt solutions, making the hydrogel promising for soft actuators.

Liquid-free ionic conductive elastomers with high mechanical properties and ionic conductivity for multifunctional sensors and triboelectric nanogenerators

Liquid-free ionic conductive elastomers (ICEs) are ideal materials for constructing flexible electronic devices by avoiding the limitations of liquid components. However, developing all-solid-state ionic conductors with high mechanical strength, high ionic conductivity, excellent healing, and recyclability remains a great challenge. Herein, a series of liquid-free polyurethane-based ICEs with a double dynamic crosslinked structure are reported. As a result of interactions between multiple dynamic bonds (multi-level hydrogen bonds, disulfide bonds, and dynamic D-A bonds) and lithium-oxygen bonds, the optimal ICE exhibited a high mechanical strength (1.18 MPa), excellent ionic conductivity (0.14 mS cm-1), desirable healing capacity (healing efficiency >95%), and recyclability. A multi-functional wearable sensor based on the novel ICE enabled real-time and rapid detection of various human activities and enabled recognizing writing signals and encrypted information transmission. A triboelectric nanogenerator based on the novel ICE exhibited an excellent open-circuit voltage of 464 V, a short-circuit current of 16 μA, a transferred charge of 50 nC, and a power density of 720 mW m-2, enabling powering of small-scale electronic products. This study provides a feasible strategy for designing flexible sensor products and healing, self-powered devices, with promising prospects for application in soft ionic electronics.

Self-Healing Hydrogel Bioelectronics

Hydrogels have emerged as powerful building blocks to develop various soft bioelectronics because of their tissue-like mechanical properties, superior bio-compatibility, the ability to conduct both electrons and ions, and multiple stimuli-responsiveness. However, hydrogels are vulnerable to mechanical damage, which limits their usage in developing durable hydrogel-based bioelectronics. Self-healing hydrogels aim to endow bioelectronics with the property of repairing specific functions after mechanical failure, thus improving their durability, reliability, and longevity. This review discusses recent advances in self-healing hydrogels, from the self-healing mechanisms, material chemistry, and strategies for multiple properties improvement of hydrogel materials, to the design, fabrication, and applications of various hydrogel-based bioelectronics, including wearable physical and biochemical sensors, supercapacitors, flexible display devices, triboelectric nanogenerators (TENGs), implantable bioelectronics, etc. Furthermore, the persisting challenges hampering the development of self-healing hydrogel bioelectronics and their prospects are proposed. This review is expected to expedite the research and applications of self-healing hydrogels for various self-healing bioelectronics.

Wireless Battery-free and Fully Implantable Organ Interfaces

Advances in soft materials, miniaturized electronics, sensors, stimulators, radios, and battery-free power supplies are resulting in a new generation of fully implantable organ interfaces that leverage volumetric reduction and soft mechanics by eliminating electrochemical power storage. This device class offers the ability to provide high-fidelity readouts of physiological processes, enables stimulation, and allows control over organs to realize new therapeutic and diagnostic paradigms. Driven by seamless integration with connected infrastructure, these devices enable personalized digital medicine. Key to advances are carefully designed material, electrophysical, electrochemical, and electromagnetic systems that form implantables with mechanical properties closely matched to the target organ to deliver functionality that supports high-fidelity sensors and stimulators. The elimination of electrochemical power supplies enables control over device operation, anywhere from acute, to lifetimes matching the target subject with physical dimensions that supports imperceptible operation. This review provides a comprehensive overview of the basic building blocks of battery-free organ interfaces and related topics such as implantation, delivery, sterilization, and user acceptance. State of the art examples categorized by organ system and an outlook of interconnection and advanced strategies for computation leveraging the consistent power influx to elevate functionality of this device class over current battery-powered strategies is highlighted.

Sensitive, Robust, Wide-Range, and High-Consistency Capacitive Tactile Sensors with Ordered Porous Dielectric Microstructures

Flexible capacitive tactile sensors show great promise in personalized healthcare monitoring and human-machine interfaces, but their practical application is normally hindered because they rarely possess the required comprehensive performance, that is, high pressure sensitivity and fast response within a broad pressure range, high structure robustness, performance consistency, etc. This paper aims to engineer flexible capacitive pressure sensors with highly ordered porous dielectric microstructures and a 3D-printing-based fully solution-processable fabrication process. The proposed dielectric layer with uniformly distributed interior microporous can not only increase its compressibility and dynamic response within an extended pressure range but also enlarge its contact area with electrodes, contributing to a simultaneous improvement in the sensitivity, response speed, detection range, and structure robustness. Meanwhile, owing to its superior abilities in complex structure manufacturing and dimension controlling, the proposed 3D-printing-based fabrication process enables the consistent fabrication of the porous microstructure and thus guarantees device consistency. As a result, the prepared pressure sensors exhibit a high sensitivity of 0.21 kPa-1, fast response and relaxation times of 112 and 152 ms, an interface bonding strength of more than 455.2 kPa, and excellent performance consistency (≤5.47% deviation among different batches of sensors) and tunability. Encouraged by this, the pressure sensor is further integrated with a wireless readout circuit and realizes wireless wearable monitoring of various biosignals (pulse waves and heart rate) and body movements (from slight finger touch to large knee bending). Finally, the influence law of the feature parameters of the porous microstructure on device performance is established by the finite element method, paving the way for sensor optimization. This study motivates the development of flexible capacitive pressure sensors toward practical application.

Super flexible, self-healing, and self-adhesive double network hydrogel reinforced by okara cellulose nanofibrils

Inspired by the mussel, tannic acid (TA) was modified onto the surface of self-made cellulose nanofibrils (CNFs) to prepare TA@CNFs, which was introduced into borax crosslinked polyvinyl alcohol (PVA) to prepare PTC double-network hydrogel with self-healing properties. Through the comparative observation of TEM images and infrared spectra before and after tannic acid modification, the formation of TA@CNFs was proved. The introduction of TA@CNFs greatly increases the fracture stress of PTC hydrogel, which is more than 10 times higher than that of PVA hydrogel without TA@CNFs, and has high fracture strain (1723 %). Moreover, PTC hydrogel has the ability of rapid self-healing, which can heal to the original form within two minutes. In addition, the temperature response ability of PTC hydrogel makes it capable of reshaping. The self-adhesion ability of PTC hydrogel enables it to adhere to the human epidermis to detect motion signals, as sensitive and as stable as a flexible sensor.

Light-mediated protein functionalization of photoclickable hydrogel interface for selective cell capture and dot blotting assay

The construction of versatile functional hydrogel interfaces holds promising prospects in biosensing and bioengineering. Herein, we introduced a light-induced protein conjugation strategy for on-demand surface modification of hydrogel interface based on the photoclick cyclization between primary amine and o-nitrobenzyl alcohol. We achieved the on-demand protein conjugation by grafting the molecular plugin, 4-(hydroxymethyl)-3-nitrobenzoic acid (HNBA), onto the hydrogel surface, followed by the mask-aided photoclick reaction with the protein of interest. This method enables the creation of protein patterns on hydrogel interface with a lower limit of pattern width at ∼70 μm. With this method, we demonstrated the surface engineering of epidermal growth factor (EGF) on hydrogel interface for selective capture of EGF receptor-positive cancer cells with an efficiency over 80%. Moreover, we applied the mask-aided photoclick conjugation method for antigen capture and developed a photoclickable hydrogel interface-based dot blotting assay. Due to the high-efficient antigen capture of photoclick conjugation, the photoclickable hydrogel interface-based dot blotting assay shows improved sensitivity for antigen detection with a limit of detection as 0.065 ng. We believed that this light-induced protein conjugation method holds the potential as a robust strategy for the construction of bioactive hydrogel interfaces for various bio-related applications.

Effect of Predamage on the Fracture Energy of Double-Network Hydrogels

Double-network (DN) hydrogels are tough soft materials, and the high fracture resistance can be attributed to the formation of a large damage zone (internal fracture of the brittle first network) around the crack tip. In this work, we studied the effect of predamage in the brittle network on the fracture energy Γc of DN hydrogels. The prestretch of the first network was induced by prestretching the DN gels to prestretch ratio λpre. Depending on the λpre in relative to the yielding stretch ratio λy, above which the brittle first network starts to break into discontinuous fragments inside DN gels, two regimes were observed: Γc decreases monotonically with λpre in the regime of λpre < λy, mainly due to the decreasing contribution from the bulk internal damage, while Γc increases with λpre in the regime of λpre > λy. The latter can be understood by the release of the hidden length of the stretchable network strands by the rupture of the brittle network, whereby the broken fragments of the brittle network could serve as sliding cross-links to further delocalize the stress-concentration near the crack tip and prevent chain scissions.

Recent Advances in Bioelectronics for Localized Drug Delivery

The last decade has witnessed remarkable advancements in bioelectronics, ushering in a new era of wearable and implantable devices for drug delivery. By utilizing miniaturized system design and/or flexible materials, bioelectronics illustrates ideal integration with target organs and tissues, making them ideal platforms for localized drug delivery. Furthermore, the development of electrically assisted drug delivery systems has enhanced the efficiency and safety of therapeutic administration, particularly for the macromolecules that encounter additional challenges in penetrating biological barriers. In this review, a concise overview of recent progress in bioelectronic devices for in vivo localized drug delivery, with highlights on the latest trends in device design, working principles, and their corresponding functionalities, is provided. The reported systems based on their targeted delivery locations as wearable systems, ingestible systems, and implantable systems are categorized. Each category is introduced in detail by highlighting the special requirements for devices and the corresponding solutions. The remaining challenges in this field and future directions are also discussed.

Soft and Conductive Polyethylene Glycol Hydrogel Electrodes for Electrocardiogram Monitoring

The measurement of biosignals in the clinical and healthcare fields is fundamental; however, conventional electrodes pose challenges such as incomplete skin contact and skin-related issues, hindering accurate biosignal measurement. To address these challenges, conductive hydrogels, which are valuable owing to their biocompatibility and flexibility, have been widely developed and explored for electrode applications. In this study, we fabricated a conductive hydrogel by mixing polyethylene glycol diacrylate (PEGDA) with poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) polymers dissolved in deionized water, followed by light-triggered crosslinking. Notably, this study pioneered the use of a PEGDA-PEDOT:PSS hydrogel for electrocardiogram (ECG) monitoring- a type of biosignal. The resulting PEGDA-PEDOT:PSS hydrogel demonstrated remarkable conductivity while closely approximating the modulus of skin elasticity. Additionally, it demonstrated biocompatibility and a high signal-to-noise ratio in the waveforms. This study confirmed the exceptional suitability of the PEGDA-PEDOT:PSS hydrogel for accurate biosignal measurements with potential applications in various wearable devices designed for biosignal monitoring.

High-Saline-Enabled Hydrophobic Homogeneous Cross-Linking for Extremely Soft, Tough, and Stretchable Conductive Hydrogels as High-Sensitive Strain Sensors

Design of admirable conductive hydrogels combining robust toughness, soft flexibility, desirable conductivity, and freezing resistance remains daunting challenges for meeting the customized and critical demands of flexible and wearable electronics. Herein, a promising and facile strategy to prepare hydrogels tailored to these anticipated demands is proposed, which is prepared in one step by homogeneous cross-linking of acrylamide using hydrophobic divinylbenzene stabilized by micelles under saturated high-saline solutions. The influence of high-saline environments on the hydrogel topology and mechanical performance is investigated. The high-saline environments suppress the size of hydrophobic cross-linkers in micelles during hydrogel polymerization, which weaken the dynamic hydrophobic associations to soften the hydrogels. Nevertheless, the homogeneous cross-linked networks ensure antifracture during ultralarge deformations. The obtained hydrogels show special mechanical performance combining extremely soft deformability and antifracture features (Young's modulus, 5 kPa; stretchability, 10200%; toughness, 134 kJ m-2; and excellent anticrack propagation). The saturated-saline environments also endow the hydrogels with desirable ion conductivity (106 mS cm-1) and freezing resistance (<20 °C). These comprehensive properties of the obtained hydrogels are quite suitable for flexible electronic applications, which is demonstrated by the high sensitivity and durability of the derived strain sensors.

A snapshot review on materials enabled multimodal bioelectronics for neurological and cardiac research

Seamless integration of the body and electronics toward the understanding, quantification, and control of disease states remains one of the grand scientific challenges of this era. As such, research efforts have been dedicated to developing bioelectronic devices for chemical, mechanical, and electrical sensing, and cellular and tissue functionality modulation. The technologies developed to achieve these capabilities cross a wide range of materials and scale (and dimensionality), e.g., from micrometer to centimeters (from 2-dimensional (2D) to 3-dimensional (3D) assemblies). The integration into multimodal systems which allow greater insight and control into intrinsically multifaceted biological systems requires careful design and selection. This snapshot review will highlight the state-of-the-art in cellular recording and modulation as well as the material considerations for the design and manufacturing of devices integrating their capabilities.

Advances in the Preparation of Tough Conductive Hydrogels for Flexible Sensors

The rapid development of tough conductive hydrogels has led to considerable progress in the fields of tissue engineering, soft robots, flexible electronics, etc. Compared to other kinds of traditional sensing materials, tough conductive hydrogels have advantages in flexibility, stretchability and biocompatibility due to their biological structures. Numerous hydrogel flexible sensors have been developed based on specific demands for practical applications. This review focuses on tough conductive hydrogels for flexible sensors. Representative tactics to construct tough hydrogels and strategies to fulfill conductivity, which are of significance to fabricating tough conductive hydrogels, are briefly reviewed. Then, diverse tough conductive hydrogels are presented and discussed. Additionally, recent advancements in flexible sensors assembled with different tough conductive hydrogels as well as various designed structures and their sensing performances are demonstrated in detail. Applications, including the wearable skins, bionic muscles and robotic systems of these hydrogel-based flexible sensors with resistive and capacitive modes are discussed. Some perspectives on tough conductive hydrogels for flexible sensors are also stated at the end. This review will provide a comprehensive understanding of tough conductive hydrogels and will offer clues to researchers who have interests in pursuing flexible sensors.

Programming hydrogel adhesion with engineered polymer network topology

Hydrogel adhesion that can be easily modulated in magnitude, space, and time is desirable in many emerging applications ranging from tissue engineering and soft robotics to wearable devices. In synthetic materials, these complex adhesion behaviors are often achieved individually with mechanisms and apparatus that are difficult to integrate. Here, we report a universal strategy to embody multifaceted adhesion programmability in synthetic hydrogels. By designing the surface network topology of a hydrogel, supramolecular linkages that result in contrasting adhesion behaviors are formed on the hydrogel interface. The incorporation of different topological linkages leads to dynamically tunable adhesion with high-resolution spatial programmability without alteration of bulk mechanics and chemistry. Further, the association of linkages enables stable and tunable adhesion kinetics that can be tailored to suit different applications. We rationalize the physics of polymer chain slippage, rupture, and diffusion at play in the emergence of the programmable behaviors. With the understanding, we design and fabricate various soft devices such as smart wound patches, fluidic channels, drug-eluting devices, and reconfigurable soft robotics. Our study presents a simple and robust platform in which adhesion controllability in multiple aspects can be easily integrated into a single design of a hydrogel network.

Fabrication of a flexible stretchable hydrogel-based antenna using a femtosecond laser for miniaturization

We demonstrated a new method of fabricating a stretchable antenna by injecting liquid metal (LM) into a femtosecond-laser-ablated embedded hydrogel microchannel, and realized miniaturization of a stretchable dipole antenna based on hydrogel substrate. Firstly, symmetrical microchannels with two equal and linear branches were formed by a femtosecond laser in the middle of a hydrogel substrate, and then were filled with LM by use of a syringe needle. Using this method, a stretchable LM-dipole antenna with each dimension of  24 mm × 0.6 mm × 0.2 mm separated by a 2-mm gap, was formed in the middle of a 70 mm × 12 mm × 7 mm hydrogel slab. Since the polyacrylamide (PAAm) hydrogel contained ∼ 95 wt % deionized water with a high permittivity of 79 in the 0.5 GHz - 1.5 GHz range, the hydrogel used to prepare the flexible antenna can be considered as distilled water boxes. Experiments and simulations showed that a 5-cm-long LM-dipole embedded in hydrogel resonated at approximately 927.5 MHz with an S11 value of about - 12.6 dB and omnidirectional radiation direction. Benefiting from the high permittivity of the hydrogel, the dipole length was downsized by about half compared with conventional polymer substrates at the same resonant frequency. By varying the applied strain from 0 to 48%, the resonant frequency of the hydrogel/LM dipole antenna can be tuned from 770.3 MHz to 927.0 MHz. This method provides a simple and scalable technique for the design and preparation of LM-pattern microstructures in hydrogels, and has potential applications in hydrogel-based soft electronic device.

Tough adhesion enhancing strategies for injectable hydrogel adhesives in biomedical applications

Injectable hydrogel adhesives have gained widespread attention due to their ease of use, fast application time, and suitability for minimally invasive procedures. Several biomedical applications depend on tough adhesion between hydrogel adhesives and tissues, including wound closure and healing, hemostasis, tissue regeneration, drug delivery, and wearable electronic devices. Compared with bulk hydrogel adhesives formed ex situ, injectable hydrogel adhesives are more difficult to achieve strong adhesion strength due to a further balance of cohesion and adhesion while maintaining their flowability. In this review, the critical principles in designing tough adhesion of injectable hydrogel adhesives are summarized, including simultaneously enhancing their intrinsic interfacial toughness (Γ0inter) and mechanical dissipation (ΓDinter). Thereafter, various design strategies to enhance the Γ0inter and ΓDinter are discussed and evaluated respectively, involving multiple noncovalent/covalent interactions, topological connections, and polymer network structures. Furthermore, targeted biomedical applications of injectable hydrogel adhesives for specific tissue needs are systematically highlighted. In the end, this review outlines the challenges and trends in producing next-generation multifunctional injectable hydrogels for both practical and translational applications.

Cellulose-based bioabsorbable and antibiotic coated surgical staple with bioinspired design for efficient wound closure

The quest to design a flawless wound closure system began long ago and is still underway. Introducing surgical staples is one of the most significant breakthroughs in this effort. In this work, we developed a biodegradable surgical staple to meet the optimal wound closure system criteria and other clinical requirements, such as radiography compatibility and secondary infection prevention. To meet these requirements, a naturally derived cellulose acetate (CA) fiber-reinforced poly-(l-lactic acid) (PLLA) composite was synthesized, and its physicochemical properties were determined using several characterizations such as Fourier-transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC) and Universal testing machine (UTM), etc. Taking cues from the Mantis's foreleg, a novel staple design was implemented and verified using Finite Element Analysis (FEA). The CA + PLLA staples were fabricated using melt-casted/3D-printing processes. The staples exhibited excellent biodegradation in both wound and physiological microenvironments with sufficient puncturing strength and later closed the wound's edges mechanically. In addition, the CA + PLLA staples also exhibit metal-like ductility properties to withstand horizontal skin tensions during the healing process. Further, the staples are coated with an antibiotic to combat infections effectively to provide better healing.

Transparent Electronics for Wearable Electronics Application

Recent advancements in wearable electronics offer seamless integration with the human body for extracting various biophysical and biochemical information for real-time health monitoring, clinical diagnostics, and augmented reality. Enormous efforts have been dedicated to imparting stretchability/flexibility and softness to electronic devices through materials science and structural modifications that enable stable and comfortable integration of these devices with the curvilinear and soft human body. However, the optical properties of these devices are still in the early stages of consideration. By incorporating transparency, visual information from interfacing biological systems can be preserved and utilized for comprehensive clinical diagnosis with image analysis techniques. Additionally, transparency provides optical imperceptibility, alleviating reluctance to wear the device on exposed skin. This review discusses the recent advancement of transparent wearable electronics in a comprehensive way that includes materials, processing, devices, and applications. Materials for transparent wearable electronics are discussed regarding their characteristics, synthesis, and engineering strategies for property enhancements. We also examine bridging techniques for stable integration with the soft human body. Building blocks for wearable electronic systems, including sensors, energy devices, actuators, and displays, are discussed with their mechanisms and performances. Lastly, we summarize the potential applications and conclude with the remaining challenges and prospects.

An Anti-Fracture and Super Deformable Soft Hydrogel Network Insensitive to Extremely Harsh Environments

Design of hydrogels with superior flexible deformability, anti-fracture toughness, and reliable environment adaption is fundamentally and practically important for diverse hydrogel-based flexible devices. However, these features can hardly be compatible even in elaborately designed hydrogels. Herein soft hydrogel networks with superior anti-fracture and deformability are proposed, which show good adaption to extremely harsh saline or alkaline environments. The hydrogel network is one-step constructed via hydrophobic homogenous cross-linking of poly (sodium acrylate), which is expected to provide hydrophobic associations and homogeneous cross-linking for energy dissipation. The obtained hydrogels are quite soft and deformable (tensile modulus: ≈20 kPa, stretchability: 3700%), but show excellent anti-fracture toughness (10.6 kJ m-2 ). The energy dissipation mechanism can be further intensified under saline or alkaline environments. The mechanical performance of the hydrophobic cross-linking topology is inspired rather than weakened by extremely saline or alkaline environments (stretchability: 3900% and 5100%, toughness: 16.1 and 17.1 kJ m-2 under saturated NaCl and 6 mol L-1 NaOH environments, respectively). The hydrogel network also shows good performance in reversible deformations, ion conductivity, sensing strain, monitoring human motions, and freezing resistance under high-saline environments. The hydrogel network show unique mechanical performance and robust environment adaption, which is quite promising for diverse applications.

Preparation of Linear Actuators Based on Polyvinyl Alcohol Hydrogels Activated by AC Voltage

Currently, the preparation of actuators based on ionic electroactive polymers with a fast response is considered an urgent topic. In this article, a new approach to activate polyvinyl alcohol (PVA) hydrogels by applying an AC voltage is proposed. The suggested approach involves an activation mechanism in which the PVA hydrogel-based actuators undergo extension/contraction (swelling/shrinking) cycles due to the local vibration of the ions. The vibration does not cause movement towards the electrodes but results in hydrogel heating, transforming the water molecules into a gaseous state and causing the actuator to swell. Two types of linear actuators based on PVA hydrogels were prepared, using two types of reinforcement for the elastomeric shell (spiral weave and fabric woven braided mesh). The extension/contraction of the actuators, activation time, and efficiency were studied, considering the PVA content, applied voltage, frequency, and load. It was found that the overall extension of the spiral weave-reinforced actuators under a load of ~20 kPa can reach more than 60%, with an activation time of ~3 s by applying an AC voltage of 200 V and a frequency of 500 Hz. Conversely, the overall contraction of the actuators reinforced by fabric woven braided mesh under the same conditions can reach more than 20%, with an activation time of ~3 s. Moreover, the activation force (swelling load) of the PVA hydrogels can reach up to 297 kPa. The developed actuators have broad applications in medicine, soft robotics, the aerospace industry, and artificial muscles.

Current Progress in Conductive Hydrogels and Their Applications in Wearable Bioelectronics and Therapeutics

Wearable bioelectronics and therapeutics are a rapidly evolving area of research, with researchers exploring new materials that offer greater flexibility and sophistication. Conductive hydrogels have emerged as a promising material due to their tunable electrical properties, flexible mechanical properties, high elasticity, stretchability, excellent biocompatibility, and responsiveness to stimuli. This review presents an overview of recent breakthroughs in conductive hydrogels, including their materials, classification, and applications. By providing a comprehensive review of current research, this paper aims to equip researchers with a deeper understanding of conductive hydrogels and inspire new design approaches for various healthcare applications.

Engineering Smart Composite Hydrogels for Wearable Disease Monitoring

Growing health awareness triggers the public's concern about health problems. People want a timely and comprehensive picture of their condition without frequent trips to the hospital for costly and cumbersome general check-ups. The wearable technique provides a continuous measurement method for health monitoring by tracking a person's physiological data and analyzing it locally or remotely. During the health monitoring process, different kinds of sensors convert physiological signals into electrical or optical signals that can be recorded and transmitted, consequently playing a crucial role in wearable techniques. Wearable application scenarios usually require sensors to possess excellent flexibility and stretchability. Thus, designing flexible and stretchable sensors with reliable performance is the key to wearable technology. Smart composite hydrogels, which have tunable electrical properties, mechanical properties, biocompatibility, and multi-stimulus sensitivity, are one of the best sensitive materials for wearable health monitoring. This review summarizes the common synthetic and performance optimization strategies of smart composite hydrogels and focuses on the current application of smart composite hydrogels in the field of wearable health monitoring.

Hydrogel-Based Flexible Electronics

Flexible electronics is an emerging field of research involving multiple disciplines, which include but not limited to physics, chemistry, materials science, electronic engineering, and biology. However, the broad applications of flexible electronics are still restricted due to several limitations, including high Young's modulus, poor biocompatibility, and poor responsiveness. Innovative materials aiming for overcoming these drawbacks and boost its practical application is highly desirable. Hydrogel is a class of 3D crosslinked hydrated polymer networks, and its exceptional material properties render it as a promising candidate for the next generation of flexible electronics. Here, the latest methods of synthesizing advanced functional hydrogels and the state-of-art applications of hydrogel-based flexible electronics in various fields are reviewed. More importantly, the correlation between properties of the hydrogel and device performance is discussed here, to have better understanding of the development of flexible electronics by using environmentally responsive hydrogels. Last, perspectives on the current challenges and future directions in the development of hydrogel-based multifunctional flexible electronics are provided.

The Use of Hydrogels for the Treatment of Bone Osteosarcoma via Localized Drug-Delivery and Tissue Regeneration: A Narrative Review

Osteosarcoma is a malignant tumor of bone that leads to poor mortality and morbidity. Management of this cancer through conventional methods involves invasive treatment options that place patients at an increased risk of adverse events. The use of hydrogels to target osteosarcoma has shown promising results both in vitro and in vivo to eradicate tumor cells while promoting bone regeneration. The loading of hydrogels with chemotherapeutic drugs provides a route for site-specific targeted therapy for osteosarcoma. Current studies demonstrate tumor regression in vivo and lysis of tumor cells in vitro when exposed to doped hydrogel scaffolds. Additionally, novel stimuli-responsive hydrogels are able to react with the tissue microenvironment to facilitate the controlled release of anti-tumor drugs and with biomechanical properties that can be modulated. This narrative review of the current literature discusses both in vitro and in vivo studies of different hydrogels, including stimuli-responsive, designed to treat bone osteosarcoma. Future applications to address patient treatment for this bone cancer are also discussed.

Research progress of physical transdermal enhancement techniques in tumor therapy

The advancement and popularity of transdermal drug delivery (TDD) based on the physical transdermal enhancement technique (PTET) has opened a new paradigm for local tumor treatment. The drug can be directly delivered to the tumor site through the skin, thus avoiding the toxic side effects caused by the first-pass effect and achieving high patient compliance. Further development of PTETs has provided many options for antitumor drugs and laid the foundation for future applications of wearable closed-loop targeting drug delivery systems. In this highlight, the different types of PTETs and related mechanisms, and applications of PTET-related tumor detection and therapy are highlighted. According to their type and characteristics, PTETs are categorized as follows: (1) iontophoresis, (2) electroporation, (3) ultrasound, (4) thermal ablation, and (5) microneedles. PTET-related applications in the local treatment of tumors are categorized as follows: (1) melanoma, (2) breast tumor, (3) squamous cell carcinoma, (4) cervical tumor, and (5) others. The challenges and future prospects of existing PTETs are also discussed. This highlight will provide guidance for the design of PTET-based wearable closed-loop targeting drug delivery systems and personalized therapy for tumors.

Mussel-inspired lignin decorated cellulose nanocomposite tough organohydrogel sensor with conductive, transparent, strain-sensitive and durable properties

A novel gel-based wearable sensor with environment resistance (anti-freezing and anti-drying), excellent strength, high sensitivity and self-adhesion was prepared by introducing biomass materials including both lignin and cellulose. The introduction of lignin decorated CNC (L-CNC) to the polymer network acted as nano-fillers to improve the gel's mechanical with high tensile strength (72 KPa at 25 °C, 77 KPa at -20 °C), excellent stretchability (803 % at 25 °C, 722 % at -20 °C). The abundant catechol groups formed in the process of dynamic redox reaction between lignin and ammonium persulfate endowed the gel with robust tissue adhesiveness. Impressively, the gel exhibited outstanding environment resistance, which could be stored for a long time (>60 days) in an open-air environment with a wide work temperature range (-36.5 °C-25 °C). Based on these significant properties, the integrated wearable gel sensor showed superior sensitivity (gauge factor = 3.11 at 25 °C and 2.01 at -20 °C) and could detect human activities with excellent accuracy and stability. It is expected that this work will provide a promising platform for fabricating and application of a high-sensitive strain conductive gel with long-term usage and stability.

Multi-material 3D Printing of Mechanochromic Double Network Hydrogels for On-Demand Patterning

Cephalopods can change their color and patterns by activating the skin chromatophores for camouflage. However, in the man-made soft material systems, it is greatly challenging to fabricate the color-change structure in the desired patterns and shapes. Herein, we employ a multi-material microgel direct ink writing (DIW) printing method to make mechanochromic double network hydrogels in arbitrary shapes. We prepare the microparticles by grinding the freeze-dried polyelectrolyte hydrogel and immobilize the microparticles in the precursor solution to produce the printing ink. The polyelectrolyte microgels contain mechanophores as the cross-linkers. We adjust the rheological and printing properties of the microgel ink by tailoring the grinding time of freeze-dried hydrogels and microgel concentration. The multi-material DIW 3D printing technique is utilized to fabricate various 3D hydrogel structures which could change into a colorful pattern in response to applied force. The microgel printing strategy shows great potential in the fabrication of the mechanochromic device with arbitrary patterns and shapes.

Enhanced Rupture Force in a Cut-Dispersed Double-Network Hydrogel

The Kirigami approach is an effective way to realize controllable deformation of intelligent materials via introducing cuts into bulk materials. For materials ranging from ordinary stiff materials such as glass, ceramics, and metals to soft materials, including ordinary hydrogels and elastomers, all of them are all sensitive to the presence of cuts, which usually act as defects to deteriorate mechanical properties. Herein, we study the influence of the cuts on the mechanical properties by introducing "dispersed macro-scale cuts" into a model tough double network (DN) hydrogel (named D-cut gel), which consists of a rigid and brittle first network and a ductile stretchable second network. For comparison, DN gels with "continuous cuts" having the same number of interconnected cuts (named C-cut gel) were chosen. The fracture tests of D-cut gel and C-cut gel with different cut patterns were performed. The fracture observation revealed that crack blunting occurred at each cut tip, and a large wrinkle-like zone was formed where the wrinkles were parallel to the propagation direction of the cut. By utilizing homemade circular polarizing optical systems, we found that introducing dispersed cuts increases the rupture force by homogenizing the stress around the crack tip surrounding every cut, which reduces stress concentration in one certain cut. We believe this work reveals the fracture mechanism of tough soft materials with a kirigami cut structure, which should guide the design of advanced soft and tough materials along this line.

Mechanical Training Enabled Reinforcement of Polyrotaxane-Containing Hydrogel

Many strategies have been developed for constructing anisotropic hydrogels, however, it remains a challenge to fabricate hydrogels with anisotropic nanocrystalline domains from intrinsically soft networks. Here, we report a naphthotube-based polyrotaxane-containing hydrogel that can be reinforced via mechanical training. During the training process, the hydrogel can adopt reorientation of polymer chains to form anisotropic structures driven by external uniaxial force. Due to the multiple hydrogen bonding sites and movable feature of naphthotube, the sliding of naphthotube on PEG chains simultaneously inducing the zipping of adjacent polymer chains to form densely anisotropic nanocrystalline domains through hydrogen bonded networks. Thus, the trained hydrogel exhibits an enhanced tension stress of ≈110 kPa, which realize a remarkable enhancement of ≈10 times compare to initial state. This study provides a new tactic for improving the mechanical performance of soft materials.

Recent advances in conductive hydrogels: classifications, properties, and applications

Hydrogel-based conductive materials for smart wearable devices have attracted increasing attention due to their excellent flexibility, versatility, and outstanding biocompatibility. This review presents the recent advances in multifunctional conductive hydrogels for electronic devices. First, conductive hydrogels with different components are discussed, including pure single network hydrogels based on conductive polymers, single network hydrogels with additional conductive additives (i.e., nanoparticles, nanowires, and nanosheets), double network hydrogels based on conductive polymers, and double network hydrogels with additional conductive additives. Second, conductive hydrogels with a variety of functionalities, including self-healing, super toughness, self-growing, adhesive, anti-swelling, antibacterial, structural color, hydrophobic, anti-freezing, shape memory and external stimulus responsiveness are introduced in detail. Third, the applications of hydrogels in flexible devices are illustrated (i.e., strain sensors, supercapacitors, touch panels, triboelectric nanogenerator, bioelectronic devices, and robot). Next, the current challenges facing hydrogels are summarized. Finally, an imaginative but reasonable outlook is given, which aims to drive further development in the future.

Strong and tough fibrous hydrogels reinforced by multiscale hierarchical structures with multimechanisms

Tough natural materials such as nacre, bone, and silk exhibit multiscale hierarchical structures where distinct toughening mechanisms occur at each level of the hierarchy, ranging from molecular uncoiling to microscale fibrillar sliding to macroscale crack deflection. An open question is whether and how the multiscale design motifs of natural materials can be translated to the development of next-generation biomimetic hydrogels. To address this challenge, we fabricate strong and tough hydrogel with architected multiscale hierarchical structures using a freeze-casting-assisted solution substitution strategy. The underlying multiscale multimechanisms are attributed to the gel's hierarchical structures, including microscale anisotropic honeycomb-structured fiber walls and matrix, with a modulus of 8.96 and 0.73 MPa, respectively; hydrogen bond-enhanced fibers with nanocrystalline domains; and cross-linked strong polyvinyl alcohol chains with chain-connecting ionic bonds. This study establishes a blueprint of structure-performance mechanisms in tough hierarchically structured hydrogels and can inspire advanced design strategies for other promising hierarchical materials.

Endoscopy Deliverable and Mushroom-Cap-Inspired Hyperboloid-Shaped Drug-Laden Bioadhesive Hydrogel for Stomach Perforation Repair

Gastrointestinal tract perforation is a full-thickness injury that causes bleeding and fatal infection of the peritoneum. This condition worsens in an acidic gastric environment which interferes with the normal coagulation cascade. Current endoscopic clips to repair gastric perforations are ineffective, and metal or plastic occluders need secondary surgery to remove them. Herein, we report a self-expandable, endoscopy deliverable, adhesive hydrogel to block gastric perforation. We found the nanosilica coating significantly enhanced the adhesive strength even under a simulated strong acidic stomach environment. The developed device was disulfide cross-linked for the reducible degraded gel. By loading with vonoprazan fumarate (VF) and acidic fibroblast growth factor (AFGF), the hyperboloid-shaped device can have a sustained drug release to regulate intragastric pH and promote wound healing. The gel device can be compressed and then expanded like a mushroom when applied in an acute gastric perforation model in both rabbits and minipigs. By utilizing a stomach capsule robot for remotely monitoring the pH and by immunohistochemical analysis, we demonstrated that the compressible hyperboloid-shaped gel could stably block the perforation and promoted wound healing during the 28 days of observation. The real-time pH meter demonstrated that the gel could control intragastric pH above 4 for nearly 60 h to prevent bleeding.

Recent Progress on Hydrogel-Based Piezoelectric Devices for Biomedical Applications

Flexible electronics have great potential in the application of wearable and implantable devices. Through suitable chemical alteration, hydrogels, which are three-dimensional polymeric networks, demonstrate amazing stretchability and flexibility. Hydrogel-based electronics have been widely used in wearable sensing devices because of their biomimetic structure, biocompatibility, and stimuli-responsive electrical properties. Recently, hydrogel-based piezoelectric devices have attracted intensive attention because of the combination of their unique piezoelectric performance and conductive hydrogel configuration. This mini review is to give a summary of this exciting topic with a new insight into the design and strategy of hydrogel-based piezoelectric devices. We first briefly review the representative synthesis methods and strategies of hydrogels. Subsequently, this review provides several promising biomedical applications, such as bio-signal sensing, energy harvesting, wound healing, and ultrasonic stimulation. In the end, we also provide a personal perspective on the future strategies and address the remaining challenges on hydrogel-based piezoelectric electronics.