Hierarchical Plasmonic Nanorods and Upconversion Core-Satellite Nanoassemblies for Multimodal Imaging-Guided Combination Phototherapy

An advanced 3D DNA nanoplatform for spatiotemporally confined enhanced dual-mode biosensing MicroRNA in cancer cell

Dual-mode signal output platforms have demonstrated considerable promise due to their improved anti-interference capability and inherent signal self-correction. Nevertheless, traditional discrete-distributed signal probes often encounter significant drawbacks, including limited mass transfer efficiency, diminished signal strength, and instability in intricate biochemical environments. In response to these challenges, a scalable and hyper-compacted 3D DNA nanoplatform resembling "periodic focusing heliostat" has been developed for synergistically enhanced fluorescence (FL) and surface-enhanced Raman spectroscopy (SERS) biosensing of miRNA in cancer cells. Our approach utilized a distinctive assembly strategy integrating gold nanostars (GNS) as fundamental "heliostat units" linked by palindromic DNA sequences to facilitate each other hand-in-hand cascade alignment and condensed into large scale nanostructures. This configuration was further augmented by the incorporation of gold nanoparticles (GNP) via strong Au-S bonds, resulting in a sturdy framework for improved signal transduction. The initiation of this assembly process was mediated by the hybridization of dsDNA to miRNA-21, which served as a primer for polymerization and nicking reactions, thus generating a multifunctional T2 probe. This probe is intricately designed with three distinct parts: a 3'-palindromic end for structural integrity, a central region for capturing SERS-active probes (Cy3-P2), and a 5'-segment for attaching fluorescence reporters. Upon integration T2 into the GNS-based heliostat unit, it promotes palindromic arm-induced aggregation and plasma exciton coupling between plasma nanoparticles and signal transduction tags. This clustered arrangement creates a high-density "hot spot" array that maximizes the local electromagnetic fields necessary for enhanced SERS and FL response. This superstructure supports enhanced aggregation-induced signal amplification for both SERS and FL, offering exceptional sensitivity with LOD as low as 0.0306 pM and 0.409 pM. The efficacy of this method was demonstrated in the evaluation of miRNA-21 in various cancer cell lines.

A system for efficient and sustainable cogeneration of water and electricity: Temperature difference induced by photothermal conversion and evaporative cooling

Solar energy, with its sustainable properties, has garnered considerable attention for its potential to produce green electricity and clean water. This paper proposes a multistage energy transfer co-generation system (MWCNTs-covered thermoelectric module with aerogel and cooler, AC-CTEM) combining power generation and evaporative cooling. On the light-absorbing surface, the hot side of a thermoelectric module is covered with a hydrophobic coating made of PDMS and MWCNT. The cold side transfers heat to the evaporation zone using a heat sink. Aerogel evaporators are cross-linked with chitosan and polyurethane, which reduces the enthalpy of evaporation and facilitates efficient interfacial evaporation to remove heat and return it to refrigeration. Additionally, with the addition of Fresnel lenses and wind energy to the enhancement device, the system achieved an evaporation rate of 3.445 kg m-2 h-1 and an open-circuit voltage of 201.12 mV under 1 kW m-2 solar irradiation. The AC-CTEM system also demonstrated long-term stability and effectiveness in treating various types of non-potable water. Furthermore, we demonstrated the practical utility of the system by successfully cultivating grass seeds and powering electronic equipment. The AC-CTEM system exemplifies a practical energy-saving approach for the development of highly efficient co-generation systems.

NIR-Triggered Multifunctional NO Nanoplatform for Conquering Thermal Resistance in Biofilms

Photothermal treatment (PTT) has emerged as a promising avenue for biofilm elimination, yet its potential drawbacks, such as local hyperpyrexia and bacterial heat resistance, have posed challenges. To address these concerns, an innovative nanoplatform (Au@mSiO2-arg/ICG) is devised that integrates phototherapeutic and gas therapeutic functionalities. This multifaceted nanoplatform is composed of mesoporous silica-coated Au nanorods (Au@mSiO2), supplemented with l-arginine (l-arg) and indocyanine green (ICG), and is engineered for mild temperature PTT aimed at biofilm eradication. Au@mSiO2-arg/ICG nanoparticles (NPs) show excellent antibacterial effects through the generation of nitric oxide (NO) gas, heat, and reactive oxygen species (ROS) under 808 nm light irradiation. The ROS generated by ICG initiates a cascade reaction with l-arg, ultimately yielding NO gas molecules. This localized release of NO not only effectively curbs the expression of heat shock proteins 70 mitigating bacterial thermoresistance, but also reduces extracellular polymeric substance allowing better penetration of the therapeutic agents. Furthermore, this nanoplatform achieves an outstanding biofilm elimination rate of over 99% in an abscess model under 808 nm light irradiation (0.8 W·cm-2), thereby establishing its potential as a dependable strategy for NO-enhanced mild PTT and antibacterial photodynamic therapy (aPDT) in clinical settings.

Manganese Dioxide-Based Nanomaterials for Medical Applications

Manganese dioxide (MnO2) nanomaterials can react with trace hydrogen peroxide (H2O2) to produce paramagnetic manganese (Mn2+) and oxygen (O2), which can be used for magnetic resonance imaging and alleviate the hypoxic environment of tumors, respectively. MnO2 nanomaterials also can oxidize glutathione (GSH) to produce oxidized glutathione (GSSG) to break the balance of intracellular redox reactions. As a consequence of the sensitivity of the tumor microenvironment to MnO2-based nanomaterials, these materials can be used as multifunctional diagnostic and therapeutic platforms for tumor imaging and treatment. Importantly, when MnO2 nanomaterials are implanted along with other therapeutics, synergetic tumor therapy can be achieved. In addition to tumor treatment, MnO2-based nanomaterials display promising prospects for tissue repair, organ protection, and the treatment of other diseases. Herein, we provide a thorough review of recent progress in the use of MnO2-based nanomaterials for biomedical applications, which may be helpful for the design and clinical translation of next-generation MnO2 nanomaterials.

Hollow Ni3S4@Co3S4 with core-satellite nanostructure derived from metal-organic framework (MOF)-on-MOF hybrids as an electrode material for supercapacitors

Metal-organic frameworks (MOFs) have found wide applications in the field of supercapacitors due to their highly controllable porous structure, big specific surface area, and abundant chemical functional groups. MOF-on-MOF hybrids not only enhance the composition of MOFs (such as ligands and/or metal centers) but also provide greater structural diversity. By utilizing MOFs as precursors for preparing sulfides, the unique characteristics and inherent structure of MOFs are preserved but their conductivity and capacitance are enhanced. This study successfully synthesized hollow-structured Ni3S4@Co3S4 derived from an Ni-MOF@ZIF-67 hybrid structure, where the Ni-MOF serves as the core and ZIF-67 as the satellite. The Ni3S4@Co3S4 electrode demonstrated a specific capacity as high as 747.3 C g-1 at 1 A g-1, and it could still maintain 77% of its initial capacity at 10 A g-1. Furthermore, the assembled Ni3S4@Co3S4//AC hybrid supercapacitor (HSC) device achieved a maximum energy density of 30.8 W h kg-1 when the power density was 750 W kg-1. The device exhibited remarkable cycling durability, retaining 85.4% of its initial capacitance after 5000 cycles. Therefore, the derived functional materials based on MOF-on-MOF provide a more scalable and promising approach for the preparation of efficient electrode materials.

Advances in photothermal regulation strategies: from efficient solar heating to daytime passive cooling

Photothermal regulation concerning solar harvesting and repelling has recently attracted significant interest due to the fast-growing research focus in the areas of solar heating for evaporation, photocatalysis, motion, and electricity generation, as well as passive cooling for cooling textiles and smart buildings. The parallel development of photothermal regulation strategies through both material and system designs has further improved the overall solar utilization efficiency for heating/cooling. In this review, we will review the latest progress in photothermal regulation, including solar heating and passive cooling, and their manipulating strategies. The underlying mechanisms and criteria of highly efficient photothermal regulation in terms of optical absorption/reflection, thermal conversion, transfer, and emission properties corresponding to the extensive catalog of nanostructured materials are discussed. The rational material and structural designs with spectral selectivity for improving the photothermal regulation performance are then highlighted. We finally present the recent significant developments of applications of photothermal regulation in clean energy and environmental areas and give a brief perspective on the current challenges and future development of controlled solar energy utilization.

Three-dimensional building of anisotropic gold nanoparticles under confinement in submicron capsules

The low collision rate and contact time of gold nanoparticles (NPs) in solution afford a low welding probability, which hinders their welding structure, orientation, and dimension. Encapsulated anisotropic NPs, gold nanotriangles (AuNTs), were successfully assembled into a three-dimensional structure inside a permeable silica nanocapsule under light illumination to generate localized surface plasmon resonance (LSPR). AuNTs were trapped in the permeable silica nanocapsules and diffused in the nanospace because of copolymer release, which increased the contact probability of AuNTs and promoted the three-dimensional building of AuNTs. Electron energy loss mapping simulations revealed that the obtained three-dimensional AuNT structure exhibited spatially separated multiple LSPR modes with different energies of incident light, which are photophysically attractive beyond the facet-selective chemical growth of NPs, and postmodification for anchoring substances with site-selective attachment to the obtained structure will be applicable to expand the sensing design and class of substances for sensing.

Colorectal cancer cell membrane biomimetic ferroferric oxide nanomaterials for homologous bio-imaging and chemotherapy application

The research of nanomaterials for bio-imaging and theranostic are very active nowadays with unprecedented advantages in nanomedicine. Homologous targeting and bio-imaging greatly improve the ability of targeted drug delivery and enhance active targeting and treatment ability of nanomedicine for the tumor. In this work, lycorine hydrochloride (LH) and magnetic iron oxide nanoparticles coated with a colorectal cancer (CRC) cell membrane (LH-Fe3O4@M) were prepared, for homologous targeting, magnetic resonance imaging (MRI), and chemotherapy. Results showed that the LH-Fe3O4@M and Fe3O4@M intensity at HT29 tumor was significantly higher than that Fe3O4@PEG, proving the superior selectivity of cancer cell membrane-camouflaged nanomedicine for homologous tumors and the MRI effect of darkening contrast enhancement were remarkable at HT29 tumor. The LH-Fe3O4@M exhibited excellent chemotherapy effect in CRC models as well as LH alone and achieved a high tumor ablation rate but no damage to normal tissues and cells. Therefore, our biomimetic system achieved a homologous targeting, bio-imaging, and efficient therapeutic effect of CRC.

High-efficiency upconversion process in cobalt and neodymium doped graphene QDs for biomedical applications

Multiphoton absorbing upconversion nanoparticles are emerging as bioimaging materials but are limited by the low quantum yield of their visible fluorescence. This article contains colloids of graphene quantum dots (GQDs), Neodymium, and Cobalt doped Graphene Quantum dots (Co-GQDs and Nd-GQDs) surrounded by carboxylic acids are synthesized which especially are suitable for bio applications; in this way, carboxylic acid groups exchanged by Amoxicillin as an antibiotic with bactericidal activity. The XRD diffraction method, TEM microscope, UV-Vis, and photoluminescence spectroscopies characterize the synthesized materials. The synthesized Quantum dots (QDs) exhibit upconversion properties and their emission is centered at 480 nm, but a red shift was observed with the increase of the excitation wavelength. In the emission spectra of synthesized QDs that can be related to the defect levels introduced by passivation of the QDs in the structure, the results show that with the interaction of the surface QDs with more carboxylic groups, the redshift is not observed. As the results indicate an increase in the intensity of upconversion emission is recorded for Co-GQDs and Nd-GQDs. The absolute quantum efficiency (QY) for Co-GQDs and Nd-GQDs were determined to be 41% and 100% more than GQDs respectively. DFT calculations indicate a strong bond between graphene and cobalt and Neodymium atoms. In doped materials, there are trap levels between the band gap of the GQDs which are responsible for increasing the intensity of the upconversion phenomenon.

Albumin-based near-infrared phototheranostics for frequency upconversion luminescence/photoacoustic dual-modal imaging-guided photothermal therapy

Engineering versatile phototheranostics for multimodal diagnostic imaging and effective therapy has great potential in cancer treatment. However, developing an inherently versatile molecule is a huge challenge. In this work, a near-infrared organic dye (NRh) was synthesized and further bound with bovine serum albumin (BSA) to construct facile "one-for-all" phototheranostics (NRh-BSA NPs), which exhibited enhanced frequency upconversion luminescence (FUCL, λ_ex/em = 850/825 nm) and excellent photoacoustic (PA) and photothermal properties (λ^'_ex = 808 nm). Additionally, the BSA-modified phototheranostics NRh-BSA NPs showed specific accumulation in the tumor region through passive targeting. Based on the FUCL/PA dual modal imaging-guidance, the NRh-BSA NPs not only can guarantee the accuracy of imaging of the U87MG tumor sites, but also can improve the therapeutic effect on ablating tumors without recurrence by photothermal therapy (PTT). Collectively, our work proposed a novel strategy to construct versatile phototheranostics with the unique FUCL/PA imaging-guided technique for accurate cancer theranostics.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Dendritic Plasmonic CuPt Alloys for Closed-Loop Multimode Cancer Therapy with Remarkably Enhanced Efficacy

The outcome of laser-triggered plasmons-induced phototherapy, including photodynamic therapy (PDT) and photothermal therapy (PTT), is significantly limited by the hypoxic tumor microenvironment and the upregulation of heat shock proteins (HSPs) in response to heat stress. Mitochondria, the biological battery of cells, can serve as an important breakthrough to overcome these obstacles. Herein, dendritic triangular pyramidal plasmonic CuPt alloys loaded with heat-sensitive NO donor N, N'-di-sec-butyl-N, N'-dinitroso-1,4-phenylenediamine (BNN) is developed. Under 808 nm laser irradiation, plasmonic CuPt can generate superoxide anion free radicals (·O₂ ^- ) and heat simultaneously. The heat generated can then trigger the release of NO gas, which not only enables gas therapy but also damages the mitochondrial respiratory chain. Impaired mitochondrial respiration leads to reduced oxygen consumption and insufficient intracellular ATP supply, which effectively alleviates tumor hypoxia and undermines the synthesis of HSPs, in turn boosting plasmonic CuPt-based PDT and mild PTT. Additionally, the generated NO and ·O₂ ^- can react to form more cytotoxic peroxynitrite (ONOO^- ). This work describes a plasmonic CuPt@BNN (CPB) triggered closed-loop NO gas, free radicals, and mild photothermal therapy strategy that is highly effective at reciprocally promoting antitumor outcomes.

Gold Nanoparticles as a Biosensor for Cancer Biomarker Determination

Molecular biology applications based on gold nanotechnology have revolutionary impacts, especially in diagnosing and treating molecular and cellular levels. The combination of plasmonic resonance, biochemistry, and optoelectronic engineering has increased the detection of molecules and the possibility of atoms. These advantages have brought medical research to the cellular level for application potential. Many research groups are working towards this. The superior analytical properties of gold nanoparticles can not only be used as an effective drug screening instrument for gene sequencing in new drug development but also as an essential tool for detecting physiological functions, such as blood glucose, antigen-antibody analysis, etc. The review introduces the principles of biomedical sensing systems, the principles of nanomaterial analysis applied to biomedicine at home and abroad, and the chemical surface modification of various gold nanoparticles.

Advances in Single-component inorganic nanostructures for photoacoustic imaging guided photothermal therapy

Phototheranostic based on photothermal therapy (PTT) and photoacoustic imaging (PAI), as one of avant-garde medical techniques, have sparked growing attention because it allows noninvasive, deeply penetrative, and highly selective and effective therapy. Among a variety of phototheranostic nanoagents, single-component inorganic nanostructures are found to be novel and attractive PAI and PTT combined nanotheranostic agents and received tremendous attention, which not only exhibit structural controllability, high tunability in physiochemical properties, size-dependent optical properties, high reproducibility, simple composition, easy functionalization, and simple synthesis process, but also can be endowed with multiple therapeutic and imaging functions, realizing the superior therapy result along with bringing less foreign materials into body, reducing systemic side effects and improving the bioavailability. In this review, according to their synthetic components, conventional single-component inorganic nanostructures are divided into metallic nanostructures, metal dichalcogenides, metal oxides, carbon based nanostructures, upconversion nanoparticles (UCNPs), metal organic frameworks (MOFs), MXenes, graphdiyne and other nanostructures. On the basis of this category, their detailed applications in PAI guide PTT of tumor treatment are systematically reviewed, including synthesis strategies, corresponding performances, and cancer diagnosis and therapeutic efficacy. Before these, the factors to influence on photothermal effect and the principle of in vivo PAI are briefly presented. Finally, we also comprehensively and thoroughly discussed the limitation, potential barriers, future perspectives for research and clinical translation of this single-component inorganic nanoagent in biomedical therapeutics.

Surface plasmon resonance of Au/Ag metals for the photoluminescence enhancement of lanthanide ion Ln3+ doped upconversion nanoparticles in bioimaging

Deep tissue penetration, chemical inertness and biocompatibility give UCNPs a competitive edge over traditional fluorescent materials like organic dyes or quantum dots. However, the low quantum efficiency of UNCPs becomes an obstacle. Among extensive methods and strategies currently used to prominently solve this concerned issue, surface plasmon resonance (SPR) of noble metals is of great use due to the agreement between the SPR peak of metals and absorption band of UCNPs. A key challenge of this match is that the structures and sizes of noble metals have significant influences on the peak of SPR formants, where achieving an explicit elucidation of relationships between the physical properties of noble metals and their SPR formants is of great importance. This review aims to clarify the mechanism of the SPR effect of noble metals on the optical performance of UCNPs. Furthermore, novel research studies in which Au, Ag or Au/Ag composites in various structures and sizes are combined with UCNPs through different synthetic methods are summarized. We provide an overview of improved photoluminescence for bioimaging exhibited by different composite nanoparticles with respect to UCNPs acting as both cores and shells, taking Au@UCNPs, Ag@UCNPs and Au/Ag@UCNPs into account. Finally, there are remaining shortcomings and latent opportunities which deserve further research. This review will provide directions for the bioimaging applications of UCNPs through the introduction of the SPR effect of noble metals.

Bioimaging with Upconversion Nanoparticles

Bioimaging enables the spatiotemporal visualization of biological processes at various scales empowered by a range of different imaging modalities and contrast agents. Upconversion nanoparticles (UCNPs) represent a distinct type of such contrast agents with the potential to transform bioimaging due to their unique optical properties and functional design flexibilities. This review explores and discusses the opportunities, challenges, and limitations that UCNPs exhibit as bioimaging probes and highlights applications with spatial dimensions ranging from the single nanoparticle level to cellular, tissue, and whole animal imaging. We further summarized recent advancements in bioimaging applications enabled by UCNPs, including super-resolution techniques and multimodal imaging methods, and provide a perspective on the future potential of UCNP-based technologies in bioimaging research and clinical translation. This review may provide a valuable resource for researchers interested in exploring and applying UCNP-based bioimaging technologies.

Responsive Accumulation of Nanohybrids to Boost NIR-Phototheranostics for Specific Tumor Imaging and Glutathione Depletion-Enhanced Synergistic Therapy

Dynamic regulation of nanoparticles in a controllable manner has great potential in various areas. Compared to the individual nanoparticles, the assembled nanoparticles exhibit superior properties and functions, which can be applied to achieve desirable performances. Here, a pH-responsive i-motif DNA-mediated strategy to tailor the programmable behaviors of erbium-based rare-earth nanoparticles (ErNPs) decorated copper doped metal-organic framework (CPM) nanohybrids (ECPM) under physiological conditions is reported. Within the acidic tumor microenvironment, the i-motif DNA strands are able to form quadruplex structures, resulting in the assembly of nanohybrids and selective tumor accumulation, which further amplify the ErNPs downconversion emission (1550 nm) signal for imaging. Meanwhile, the ECPM matrix acts as a near-infrared (NIR) photon-activated reactive oxygen species (ROS) amplifier through the singlet oxygen generation of the matrix in combination with its ability of intracellular glutathione depletion upon irradiation. In short, this work displays a classical example of engineering of nanoparticles, which will manifest the importance of developing nanohybrids with structural programmability in biomedical applications.

Tailoring Polymer-Based Nanoassemblies for Stimuli-Responsive Theranostic Applications

Polymer assemblies on the nanoscale represent a powerful toolbox for the design of theranostic systems when combined with both therapeutic compounds and diagnostic reporting ones. Here, recent advances in the design of theranostic systems for various diseases, containing-in their architecture-either polymers or polymer assemblies as one of the building blocks are presented. This review encompasses the general principles of polymer self-assembly, from the production of adequate copolymers up to supramolecular assemblies with theranostic functionality. Such polymer nanoassemblies can be further tailored through the incorporation of inorganic nanoparticles to endow them with multifunctional therapeutic and/or diagnostic features. Systems that change their architecture or properties in the presence of stimuli are selected, as responsivity to changes in the environment is a key factor for enhancing efficiency. Such theranostic systems are based on the intrinsic properties of copolymers or one of the other components. In addition, systems with a more complex architecture, such as multicompartments, are presented. Selected systems indicate the advantages of such theranostic approaches and provide a basis for further developments in the field.

Recent developments in the use of gold and silver nanoparticles in biomedicine

Gold and silver nanoparticles (NPs) are widely used in the biomedical research both in the therapeutic and the sensing/diagnostics fronts. Both metals share some common optical properties with surface plasmon resonance being the most widely exploited property in therapeutics and diagnostics. Au NPs exhibit excellent light‐to‐heat conversion efficiencies and hence have found applications primarily in precision oncology, while Ag NPs have excellent antibacterial properties which can be harnessed in biomaterials' design. Both metals constitute excellent biosensing platforms owing to their plasmonic properties and are now routinely used in various optical platforms. The utilization of Au and Ag NPs in the COVID‐19 pandemic was rapidly expanded mostly in biosensing and point‐of‐care platforms and to some extent in therapeutics. In this review article, the main physicochemical properties of Au and Ag NPs are discussed with selective examples from the recent literature.

This article is categorized under:

Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease

Diagnostic Tools > In Vitro Nanoparticle‐Based Sensing

Nanotechnology Approaches to Biology > Nanoscale Systems in Biology

Multifunction in One Nanoparticle for Anticancer Therapy: Bowl-Shaped Au@PDA Yolk-Shell NPs

Multifunctional nanoparticles (NPs) with simultaneous multimodal therapeutic and imaging capabilities are very necessary for biomedical applications. We successfully prepared bowl-shaped gold@polydopamine yolk-shell NPs (bowl-shaped Au@PDA YNPs) by a novel and facile method. The unique bowl-like structure enables a drug loading rate of 92% (920 μg mg^-1). The bowl-shaped Au@PDA YNPs are biocompatible, have good photothermal conversion and strong near-infrared (NIR) absorption, and can control drug release under pH/NIR dual response. Bowl-shaped Au@PDA YNPs can also be employed as contrast agents for computed tomography/photoacoustic imaging for dual-modal imaging-guided chemotherapy and photothermal therapy due to the presence of Au NPs.

Controlling upconversion in emerging multilayer core-shell nanostructures: from fundamentals to frontier applications

Lanthanide-based upconversion nanomaterials have recently attracted considerable attention in both fundamental research and various frontier applications owing to their excellent photon upconversion performance and favourable physicochemical properties. In particular, the emergence of multi-layer core-shell (MLCS) nanostructures offers a versatile and powerful tool to realize well-defined matrix compositions and spatial distributions of the dopant on the nanometer length scale. In contrast to the conventional nanomaterials and commonly investigated core-shell nanoparticles, the rational design of MLCS nanostructures allows us to deliberately introduce more functional properties into an upconversion system, thus providing unprecedented opportunities for the precise manipulation of energy transfer channels, the dynamic control of upconversion processes, the fine tuning of switchable emission colours and new functional integration at a single-particle level. In this review, we present a summary and discussion on the key aspects of the recent progress in lanthanide-based MLCS nanoparticles, including the manipulation of emission and lifetime, the switchable multicolour output and the lanthanide ionic interactions on the nanoscale. Benefitting from the multifunctional and versatile luminescence properties, the MLCS nanostructures exhibit great potential in diversities of frontier applications such as three-dimensional display, upconversion laser, optical memory, anti-counterfeiting, thermometry, bioimaging, and therapy. The outlook and challenges as well as perspectives for the research in MLCS nanostructure materials are also provided. This review would be greatly helpful in exploring new structural designs of lanthanide-based materials to further manipulate the upconversion phenomenon and expand their application boundaries.

Rare-Earth Doping in Nanostructured Inorganic Materials

Impurity doping is a promising method to impart new properties to various materials. Due to their unique optical, magnetic, and electrical properties, rare-earth ions have been extensively explored as active dopants in inorganic crystal lattices since the 18th century. Rare-earth doping can alter the crystallographic phase, morphology, and size, leading to tunable optical responses of doped nanomaterials. Moreover, rare-earth doping can control the ultimate electronic and catalytic performance of doped nanomaterials in a tunable and scalable manner, enabling significant improvements in energy harvesting and conversion. A better understanding of the critical role of rare-earth doping is a prerequisite for the development of an extensive repertoire of functional nanomaterials for practical applications. In this review, we highlight recent advances in rare-earth doping in inorganic nanomaterials and the associated applications in many fields. This review covers the key criteria for rare-earth doping, including basic electronic structures, lattice environments, and doping strategies, as well as fundamental design principles that enhance the electrical, optical, catalytic, and magnetic properties of the material. We also discuss future research directions and challenges in controlling rare-earth doping for new applications.

Advances in Surface Enhanced Raman Spectroscopy for in Vivo Imaging in Oncology

In the last two decades, the application of surface enhanced Raman scattering (SERS) nanoparticles for preclinical cancer imaging has attracted increasing attention. Raman imaging with SERS nanoparticles offers unparalleled sensitivity, providing a platform for molecular targeting, and granting multiplexed and multimodal imaging capabilities. Recent progress has been facilitated not only by the optimization of the SERS contrast agents themselves, but also by the developments in Raman imaging approaches and instrumentation. In this article, we review the principles of Raman scattering and SERS, present advances in Raman instrumentation specific to cancer imaging, and discuss the biological means of ensuring selective in vivo uptake of SERS contrast agents for targeted, multiplexed, and multimodal imaging applications. We offer our perspective on areas that must be addressed in order to facilitate the clinical translation of SERS contrast agents for in vivo imaging in oncology.

Recent advances in multifunctional nanomaterials for photothermal-enhanced Fenton-based chemodynamic tumor therapy

Photothermal (PT)-enhanced Fenton-based chemodynamic therapy (CDT) has attracted a significant amount of research attention over the last five years as a highly effective, safe, and tumor-specific nanomedicine-based therapy. CDT is a new emerging nanocatalyst-based therapeutic strategy for the in situ treatment of tumors via the Fenton reaction or Fenton-like reaction, which has got fast progress in recent years because of its high specificity and activation by endogenous substances. A variety of multifunctional nanomaterials such as metal-, metal oxide-, and metal-sulfide-based nanocatalysts have been designed and constructed to trigger the in situ Fenton or Fenton-like reaction within the tumor microenvironment (TME) to generate highly cytotoxic hydroxyl radicals (•OH), which is highly efficient for the killing of tumor cells. However, research is still required to enhance the curative outcomes and minimize its side effects. Specifically, the therapeutic efficiency of certain CDTs is still hindered by the TME, including low levels of endogenous hydrogen peroxide (H2O2), overexpression of reduced glutathione (GSH), and low catalytic efficacy of Fenton or Fenton-like reactions (pH 5.6-6.8), which makes it difficult to completely cure cancer using monotherapy. For this reason, photothermal therapy (PTT) has been utilized in combination with CDT to enhance therapeutic efficacy. More interestingly, tumor heating during PTT not only causes damage to the tumor cells but can also accelerate the generation of •OH via the Fenton and Fenton-like reactions, thus enhancing the CDT efficacy, providing more effective cancer treatment when compared with monotherapy. Currently, synergistic PT-enhanced CDT using multifunctional nanomaterials with both PT and chemodynamic properties has made enormous progress in cancer theranostics. However, there has been no comprehensive review on this subject published to date. In this review, we first summarize the recent progress in PT-enhanced Fenton-based CDT for cancer treatment. We then discuss the potential and challenges in the future development of PT-enhanced Fenton-based nanocatalytic tumor therapy for clinical application.

Ratiometric FRET Encoded Hierarchical ZrMOF @ Au Cluster for Ultrasensitive Quantifying MicroRNA In Vivo

Here, Zirconium metal-organic frameworks @ gold (ZrMOF @ Au) cluster architectures have been fabricated and then functionalized with two fluorescent dyes (Quasar [QS] and Cyanine5.5 [Cy5.5]) through deoxyribonucleic acid hybridization, to form a fluorescence resonance energy transfer (FRET) encoded ZrMOF  @  Au-QS/Cy5.5 complex. In the presence of the target intracellular microRNA (miR)-21, the fluorescence of Cy5.5 at 705 nm (F₇₀₅ ) decreases and the fluorescence of QS at 665 nm (F₆₆₅ ) increases when Cy5.5 is released from the surface of ZrMOF  @  Au-QS/Cy5.5. The change in the fluorescence ratio (F₇₀₅ /F₆₆₅ ) shows an outstanding linear range of 0.006-67.9 amol/ng_RNA , and the limit of detection is 4.51 zmol/ng_RNA in living cells. The high ratio loading of nucleic acid on surface of ZrMOF @ Au cluster and two fluorescence encoded signal enables better sensitivity and reliability. Zeptomolar sensitivity and good linearity against target affords distinct imaging-based monitoring of the cancer marker miR-21 both in living cells and in vivo. At the same time, the architecture displays remarkable photothermal conversion efficiency (53.7%) and gives rise to outstanding therapy ability in vivo. This strategy offers new avenues for the intelligent quantification of miRNAs for simultaneous diagnoses and treatments of early-stage cancers.

Photoactivated Self-Disassembly of Multifunctional DNA Nanoflower Enables Amplified Autophagy Suppression for Low-Dose Photodynamic Therapy

Low-dose photodynamic therapy (PDT) holds great promise for reducing undesired patient photosensitivity in cancer treatment. Yet, its therapeutic effect is significantly affected by intracellular cytoprotective processes, such as autophagy. Here, an efficient autophagy suppressor is developed, which is a multifunctional DNA nanoflower (DNF) consisted of tumor-targeting aptamers and DNAzymes for silencing autophagy-related genes, with surface modification of low-dose photosensitizer (Ce6). It is found that the multifunctional DNF can specifically target tumor cells and generate reactive oxygen species (ROS) under light irradiation to trigger self-disassembly of DNF, enhancing the bioavailability of encoded DNAzymes, leading to amplified autophagy suppression. As a facile spatiotemporally programmable photogene therapy platform, the designed DNF is able to suppress tumor growth in vivo with a very low injection dose of Ce6 (18 µg kg^-1 , around 100 times lower than the generally applied dose), representing a promising strategy for cancer therapy with safely low-dose PDT.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Dual-Modal FexCuySe and Upconversion Nanoparticle Assemblies for Intracellular MicroRNA-21 Detection

In situ quantification and imaging of low-level intracellular microRNAs (miRs) are important areas in biosensor research. Herein, DNA-driven Fe_xCu_ySe@upconversion nanoparticle (UCNP) core@satellite nanostructures were developed to probe microRNA-21 (miR-21). Fe_xCu_ySe@UCNP probes displayed dual signals: upconversion luminescence (UCL) and magnetic resonance imaging (MRI). In the presence of miR-21, the luminescence signal was restored and the T₂ value was significantly increased because of dissociation of UCNPs from the assemblies. There was a good linear relationship between the dual signals and the expression levels of miR-21 in the range of 0.035-31.824 amol/ng_RNA. The limit of detection (LOD) was 0.0058 amol/ng_RNA for the luminescence intensity and 0.0182 amol/ng_RNA for the MRI signal. This method opens a new avenue for intracellular miR-21 detection with high sensitivity and specificity.

Defect-engineered porphyrinic metal-organic framework nanoparticles for targeted multimodal cancer phototheranostics

Defect-engineered porphyrinic MOF nanoparticles were fabricated with an in situ one-pot protocol using cypate as the co-ligand and modulator. This multifunctional nanoplatform integrated the photothermal and multimodal imaging properties of cypate with the photodynamic effects of porphyrins, thus achieving targeted multimodal cancer phototheranostics after folic acid modification.

Near-Infrared-Light-Responsive Copper Oxide Nanoparticles as Efficient Theranostic Nanoagents for Photothermal Tumor Ablation

A theranostic nanoagent exhibits great promise to improve diagnostic accuracy and therapy efficacy. Herein, a kind of theranostic nanoagent based on poly(vinylpyrrolidone) (PVP)-protected ultrasmall Cu_1.2O nanoparticles (Cu_1.2O NPs) is developed by a facile liquid reduction method. Attributed to high near-infrared absorbance and good biocompatibility, Cu_1.2O NPs have shown significant potential for photothermal therapy. Moreover, Cu_1.2O NPs with a satisfactory T₁ relaxivity coefficient (r₁) can be well applied as outstanding MRI contrast agents and exhibit excellent magnetic resonance imaging (MRI) ability. In vivo treatments further demonstrate that Cu_1.2O NPs could be well used as multifunctional theranostic nanoagents, which achieve precise MRI and a high photothermal antitumor effect. It is expected to further promote the research and application of copper-based nanoparticles as theranostic nanoagents for cancer therapy.

Magnetic-gold theranostic nanoagent used for targeting quad modalities T 1 & T 2-MRI/CT/PA imaging and photothermal therapy of tumours

We describe a new type of ultra-small magneto-gold nanoparticle (MGN) with folic acid (FA)-based tumour targeting and multimodal imaging-guided photothermal therapy (PTT) properties that can be used as a theranostic nanoagent. The nanoagent integrates these MGNs–FA with surface modifications, and as expected, is monodisperse, and exhibits small size, strong NIR absorption, photothermal stability, good relaxivity and X-ray absorption coefficient, tumour targeting and excellent biocompatibility. Based on these properties, the nanoagent was successfully tested, both as a photothermal agent for high PTT efficacy and as a multimodality contrast agent for T₁- & T₂-MRI/CT/PA imaging in vitro and in vivo. Notably, the results of in vivo theranostic experiments with these MGNs–FA showed that they are highly effective and safe, indicating that they are efficient and promising theranostic agents that permit comprehensive imaging for diagnosis and therapy.

The schematic diagram of the biofunctionalized magneto-gold nanoparticles as theranostic nanoagents for T₁ & T₂-MRI/CT/PAI quad modalities imaging and PTT therapy of tumours.

Self-assembled nanomaterials for biosensing and therapeutics: recent advances and challenges

Self-assembled nanomaterials (SANs) exhibit designable biofunctions owing to their tunable nanostructures and modifiable surface. Various constituent units and multi-dimensional structures of SANs provide unlimited possibilities for numerous applications. This review emphasizes the recent development of SANs in the fields of biosensing, bioimaging, and nano-drug engineering. The unit type, design concepts, material advantages, assembly driving force, nanostructure effects, drug loading performance, etc. are discussed and summarized. Finally, we briefly summarize how to assemble unique nanomaterials and point out the key challenges in this field.

Janus Nanoparticles: From Fabrication to (Bio)Applications

Janus nanoparticles (JNPs) refer to the integration of two or more chemically discrepant composites into one structure system. Studies into JNPs have been of significant interest due to their interesting characteristics stemming from their asymmetric structures, which can integrate different functional properties and perform more synergetic functions simultaneously. Herein, we present recent progress of Janus particles, comprehensively detailing fabrication strategies and applications. First, the classification of JNPs is divided into three blocks, consisting of polymeric composites, inorganic composites, and hybrid polymeric/inorganic JNPs composites. Then, the fabrication strategies are alternately summarized, examining self-assembly strategy, phase separation strategy, seed-mediated polymerization, microfluidic preparation strategy, nucleation growth methods, and masking methods. Finally, various intriguing applications of JNPs are presented, including solid surfactants agents, micro/nanomotors, and biomedical applications such as biosensing, controlled drug delivery, bioimaging, cancer therapy, and combined theranostics. Furthermore, challenges and future works in this field are provided.

Cascaded Amplifier Nanoreactor for Efficient Photodynamic Therapy

Photodynamic therapy (PDT) utilizes reactive oxygen species (ROS) to treat established diseases and has attracted growing attention in the field of cancer therapy. However, in a tumor microenvironment (TME), the inherent hypoxia and high level of antioxidants severely hamper the efficacy of ROS generation. Here, we describe a cascaded amplifier nanoreactor based on self-assembled nanofusiforms for persistent oxygenation to amplify ROS levels. The nanofusiform assembly is capable of photothermal and photodynamic treatment and regulation of redox oxidation stress by antioxidant depletion to prevent ROS tolerance. The Pt nanozyme decoration of the nanofusiform enables efficient oxygen supplements via Pt nanozyme-catalyzed decomposition of H₂O₂ overexpressed in TME and generation of O₂. Furthermore, the temperature elevation resulted from the photothermal effect of the nanofusiform increases the catalase-like catalytic activity of the Pt nanozyme for boosted oxygen generation. Thus, such a triple cascade strategy using nanozyme-based nanofusiforms amplifies the ROS level by continuous oxygenation, enhancing the efficacy of PDT in vitro and in vivo. Meanwhile, an in vivo multi-modal imaging including near-infrared fluorescence imaging, photothermal imaging, and magnetic resonance imaging achieves precise tumor diagnosis. The rationally designed nanofusiform acts as an efficient ROS amplifier through multidimension strengthening of continuous oxygenation, providing a potential smart nanodrug for cancer therapy.

Rapid Screening and Identification of Antitumor Ingredients from the Mangrove Endophytic Fungus Using an Enzyme-Immobilized Magnetic Nanoparticulate System

As a consequence of recent progression in biomedicine and nanotechnology, nanoparticle-based systems have evolved as a new method with extensive applications in responsive therapy, multimodal imaging, drug delivery and natural product separation. Meanwhile, the magnetic nanoparticulate system has aroused great interest for separation and purification because of its excellent magnetic properties. Phospholipase A₂ (PLA₂) is a highly expressed regulator to promote the growth of various cancers and is an ideal target to treat cancers. In this study, a novel strategy based on ligand–receptor interactions to discover novel PLA₂ inhibitors was established, in which PLA₂-functionalized Fe₃O₄@PLGA-PEG-NH₂ magnetic nanoparticles were used as a supporting material combined with high-performance liquid chromatography–mass spectrometry, aiming to accelerate the discovery of novel PLA₂ inhibitors from natural sources such as mangrove endophytic fungi. Under the optimized ligand fishing conditions, six target compounds were ultimately fished and identified to be cyclic peptides (1–3) and sterols (4–6), which compounds 1, 2 and 4–6 have well-documented cytotoxicities. Compound 3 exerted better inhibitory effect on A549 cells by experiment. In conclusion, PLA₂-functionalized Fe₃O₄@PLGA-PEG-NH₂ magnetic nanoparticles-based ligand fishing provided a feasible, selective and effective platform for the efficient screening and identification of antitumor components from natural products.

Rationally Programming Nanomaterials with DNA for Biomedical Applications

DNA is not only a carrier of genetic information, but also a versatile structural tool for the engineering and self-assembling of nanostructures. In this regard, the DNA template has dramatically enhanced the scalability, programmability, and functionality of the self-assembled DNA nanostructures. These capabilities provide opportunities for a wide range of biomedical applications in biosensing, bioimaging, drug delivery, and disease therapy. In this review, the importance and advantages of DNA for programming and fabricating of DNA nanostructures are first highlighted. The recent progress in design and construction of DNA nanostructures are then summarized, including DNA conjugated nanoparticle systems, DNA-based clusters and extended organizations, and DNA origami-templated assemblies. An overview on biomedical applications of the self-assembled DNA nanostructures is provided. Finally, the conclusion and perspectives on the self-assembled DNA nanostructures are presented.

Trap Energy Upconversion-Like Near-Infrared to Near-Infrared Light Rejuvenateable Persistent Luminescence

Persistent-luminescence phosphors (PLPs) have a wide variety of applications in the fields of photonics and biophotonics due to their ultralong afterglow lifetime. However, the existing PLPs are charged and recharged with short-wavelength high-energy photons or inconvenient and potentially risky X-ray beams. To date, deep tissue penetrable NIR light has mainly been used for photostimulated afterglow emission, which continues to decay and weaken after each cycle, Herein, a new paradigm of trap energy upconversion-like near-infrared (NIR) to near-infrared light rejuvenateable persistent luminescence in bismuth-doped calcium stannate phosphors and nanoparticles is reported. In contrast to the existing PLPs and persistent-luminescence nanoparticles, the materials enable the occurrence of a reversed transition of the carriers from a deep-level energy trap to a shallow-level trap upon excitation by low-energy NIR photons. Thus these new materials can be charged circularly via deep-tissue penetrable NIR photons, which is unable to be done for existing PLPs, and emit afterglow signals. This conceptual work will lay the foundation to design new categories of NIR-absorptive-NIR-emissive PLPs and nanoparticles featuring physically harmless and deep tissue penetrable NIR light renewability and sets the stage for numerous biological applications, which have been limited by current materials.

Fluorescent nanotechnology for in vivo imaging

Fluorescent imaging in living animals gives an intuitive picture of the dynamic processes in the complex environment within a living being. However, animal tissues present a substantial barrier and are opaque to most wavelengths of visible light. Fluorescent nanoparticles (NPs) with new photophysical characteristics have shown excellent performance for in vivo imaging. Hence, fluorescent NPs have been widely studied and applied for the detection of molecular and biological processes in living animals. In addition, developments in the area of nanotechnology have allowed materials to be used in intact animals for disease detection, diagnosis, drug delivery, and treatment. This review provides information on the different types of fluorescent particles based on nanotechnology, describing their unique individual properties and applications for detecting vital processes in vivo. The development and application of new fluorescent NPs will provide opportunities for in vivo imaging with better penetration, sensitivity, and resolution. This article is categorized under: Diagnostic Tools > in vivo Nanodiagnostics and Imaging.

Aptamer-Functionalized Upconverting Nanoformulations for Light-Switching Cancer-Specific Recognition and In Situ Photodynamic-Chemo Sequential Theranostics

Biomarker-activatable theranostic formulations offer the potential for removing specific tumors with a high diagnostic accuracy and a significant pharmacological effect. Herein, we developed a novel activatable theranostic nanoformulation UAS-PD [upconversion nanophosphor (UCNP)-aptamer/ssDNA-pyropheophorbide-a (PPA)-doxyrubicin (DOX)], which can recognize specific cancer cells with sensitivity and trigger the localized photodynamic destruction and enhanced chemotherapy. UAS-PD was constructed by the conjugation of UCNPs and aptamer probes containing the photosensitizer PPA and the chemotherapeutic drug DOX. When cancer cells are present, the UAS-PD specifically binds to PTK7, an overexpressed protein present on the surface of cancer cells, through conformational recombination of the aptamer structure and switches its upconversion luminescence from 655 to 540 nm. This long-lived ratiometric optical signal provides an ultrasensitive detection limit as low as 3.9 nM for PTK7. Changes in the conformation of UAS-PD can also induce PPA to approach UCNPs, which can produce cytotoxic singlet oxygens under near-infrared excitation to destroy the cell membrane and enhance its permeability for the simultaneously released DOX that targets cellular DNA degradation, which results in a highly effective tumor-killing effect by synergistic extra-intracellular sequential damage.

Switching to the brighter lane: pathways to boost the absorption of lanthanide-doped nanoparticles

Lanthanide-doped nanoparticles (LNPs) are speedily colonizing several research fields, such as biological (multimodal) imaging, photodynamic therapy, volumetric encoding displays, and photovoltaics. Yet, the electronic transitions of lanthanide ions obey the Laporte rule, which dramatically hampers their light absorption capabilities. As a result, the brightness of these species is severely restricted. This intrinsic poor absorption capability is the fundamental obstacle for untapping the full potential of LNPs in several of the aforementioned fields. Among others, three of the most promising physicochemical approaches that have arisen during last two decades to face the challenges of increasing LNP absorption are plasmonic enhancement, organic-dye sensitization, and coupling with semiconductors. The fundamental basis, remarkable highlights, and comparative achievements of each of these pathways for absorption enhancement are critically discussed in this minireview, which also includes a detailed discussion of the exciting perspectives ahead.

Independent Luminescent Lifetime and Intensity Tuning of Upconversion Nanoparticles by Gradient Doping for Multiplexed Encoding

Luminescent materials with engineered optical properties have been developed for multiplexed labeling detection, where encoding capacity plays a pivotal role in the efficiency. However, multi-dimensional optical identities are usually not independent which essentially hinder the practical encoding numbers to access theoretical capacity. In this work, we carefully studied the sensitizer gradient doping structure in near-infrared (NIR) excitable upconversion nanoparticles (UCNPs) and managed to achieve independent emission intensity and lifetime tuning. With the orthogonally tunability, it breaks the constraint of intensity (k) and lifetime (n) correlation and expands the practical encoding number to theoretical value as (k+1)ⁿ -1 in binary encoding. This method can also be combined with previous lifetime engineering as well to realize high level multiplexing.