p-Type MoS2 and n-Type ZnO Diode and Its Performance Enhancement by the Piezophototronic Effect

Heterogeneous Integration of Wide Bandgap Semiconductors and 2D Materials: Processes, Applications, and Perspectives

Wide-bandgap semiconductors (WBGs) are crucial building blocks of many modern electronic devices. However, there is significant room for improving the crystal quality, available choice of materials/heterostructures, scalability, and cost-effectiveness of WBGs. In this regard, utilizing layered 2D materials in conjunction with WBG is emerging as a promising solution. This review presents recent advancements in the integration of WBGs and 2D materials, including fabrication techniques, mechanisms, devices, and novel functionalities. The properties of various WBGs and 2D materials, their integration techniques including epitaxial and nonepitaxial growth methods as well as transfer techniques, along with their advantages and challenges, are discussed. Additionally, devices and applications based on the WBG/2D heterostructures are introduced. Distinctive advantages of merging 2D materials with WBGs are described in detail, along with perspectives on strategies to overcome current challenges and unlock the unexplored potential of WBG/2D heterostructures.

Controlled Synthesis of Large-Area Oriented ZnO Nanoarrays

Large-area oriented ZnO nanoarrays (including nanowire, nanorod, and nanotube) on ITO glass substrates are synthesized via the simple hydrothermal, electrodeposition, and electrochemical etching approach. The morphology of ZnO nanoarrays is controlled by adjusting the reaction temperature, reaction time, and current density. The scanning and transmission electron microscopy (SEM and TEM) results indicate the successful preparation of large-area oriented ZnO nanoarrays with different types, and the energy-dispersive X-microanalysis spectrum (EDS) and X-ray diffraction (XRD) results confirm that the composition of the obtained nanoarrays is ZnO. More importantly, the as-prepared ZnO nanotube arrays are observed with about a 40% increase in ultraviolet absorption intensity compared to the ZnO nanowire/nanorod arrays, due to having larger specific surface areas. The as-prepared different types of ZnO nanoarrays have great potential for applications in low-cost and high-performance optoelectronic devices.

Self-powered photodetectors: a device engineering perspective

Nanoscale self-powered photodetectors that can work without any external source of energy are required for future applications. There is potential demand for these devices in areas like wireless surveillance, weather forecasting, remote monitoring, and places where the availability of power is scarce. This study provides an overview of state of the art research trends and improvements in self-powered photodetectors. A device engineering perspective for improvement in the figures of merit has been presented along with a description of additional effects like pyro-phototronic, piezo-phototronic, and surface plasmonics.

Anti-Ambipolar Heterojunctions: Materials, Devices, and Circuits

Anti-ambipolar heterojunctions are vital in constructing high-frequency oscillators, fast switches, and multivalued logic (MVL) devices, which hold promising potential for next-generation integrated circuit chips and telecommunication technologies. Thanks to the strategic material design and device integration, anti-ambipolar heterojunctions have demonstrated unparalleled device and circuit performance that surpasses other semiconducting material systems. This review aims to provide a comprehensive summary of the achievements in the field of anti-ambipolar heterojunctions. First, the fundamental operating mechanisms of anti-ambipolar devices are discussed. After that, potential materials used in anti-ambipolar devices are discussed with particular attention to 2D-based, 1D-based, and organic-based heterojunctions. Next, the primary device applications employing anti-ambipolar heterojunctions, including anti-ambipolar transistors (AATs), photodetectors, frequency doublers, and synaptic devices, are summarized. Furthermore, alongside the advancements in individual devices, the practical integration of these devices at the circuit level, including topics such as MVL circuits, complex logic gates, and spiking neuron circuits, is also discussed. Lastly, the present key challenges and future research directions concerning anti-ambipolar heterojunctions and their applications are also emphasized.

MoS2 Field-Effect Transistor Performance Enhancement by Contact Doping and Defect Passivation via Fluorine Ions and Its Cyclic Field-Assisted Activation

MoS2-based field-effect transistors (FETs) and, in general, transition metal dichalcogenide channels are fundamentally limited by high contact resistance (RC) and intrinsic defects, which results in low drive current and lower carrier mobilities, respectively. This work addresses these issues using a technique based on CF4 plasma treatment in the contacts and further cyclic field-assisted drift and activation of the fluorine ions (F-), which get introduced into the contact region during the CF4 plasma treatment. The F- ions are activated using cyclic pulses applied across the source-drain (S/D) contacts, which leads to their migration to the contact edges via the channel. Further, using ab initio molecular dynamics and density functional theory simulations, these F- ions are found to bond at sulfur (S) vacancies, resulting in their passivation and n-type doping in the channel and near the S/D contacts. An increase in doping results in the narrowing of the Schottky barrier width and a reduction in RC by ∼90%. Additionally, the passivation of S vacancies in the channel enhances the mobility of the FET by ∼150%. The CF4 plasma treatment in contacts and further cyclic field-assisted activation of F- ions resulted in an ON-current (ION) improvement by ∼90% and ∼480% for exfoliated and CVD-grown MoS2, respectively. Moreover, this improvement in ION has been achieved without any deterioration in the ION/IOFF, which was found to be >7-8 orders.

2D Materials in Flexible Electronics: Recent Advances and Future Prospectives

Flexible electronics have recently gained considerable attention due to their potential to provide new and innovative solutions to a wide range of challenges in various electronic fields. These electronics require specific material properties and performance because they need to be integrated into a variety of surfaces or folded and rolled for newly formatted electronics. Two-dimensional (2D) materials have emerged as promising candidates for flexible electronics due to their unique mechanical, electrical, and optical properties, as well as their compatibility with other materials, enabling the creation of various flexible electronic devices. This article provides a comprehensive review of the progress made in developing flexible electronic devices using 2D materials. In addition, it highlights the key aspects of materials, scalable material production, and device fabrication processes for flexible applications, along with important examples of demonstrations that achieved breakthroughs in various flexible and wearable electronic applications. Finally, we discuss the opportunities, current challenges, potential solutions, and future investigative directions about this field.

Plasma Processing and Treatment of 2D Transition Metal Dichalcogenides: Tuning Properties and Defect Engineering

Two-dimensional transition metal dichalcogenides (TMDs) offer fascinating opportunities for fundamental nanoscale science and various technological applications. They are a promising platform for next generation optoelectronics and energy harvesting devices due to their exceptional characteristics at the nanoscale, such as tunable bandgap and strong light-matter interactions. The performance of TMD-based devices is mainly governed by the structure, composition, size, defects, and the state of their interfaces. Many properties of TMDs are influenced by the method of synthesis so numerous studies have focused on processing high-quality TMDs with controlled physicochemical properties. Plasma-based methods are cost-effective, well controllable, and scalable techniques that have recently attracted researchers' interest in the synthesis and modification of 2D TMDs. TMDs' reactivity toward plasma offers numerous opportunities to modify the surface of TMDs, including functionalization, defect engineering, doping, oxidation, phase engineering, etching, healing, morphological changes, and altering the surface energy. Here we comprehensively review all roles of plasma in the realm of TMDs. The fundamental science behind plasma processing and modification of TMDs and their applications in different fields are presented and discussed. Future perspectives and challenges are highlighted to demonstrate the prominence of TMDs and the importance of surface engineering in next-generation optoelectronic applications.

Strain Effects on Flexible Perovskite Solar Cells

Flexible perovskite solar cells (f-PSCs) as a promising power source have grabbed surging attention from academia and industry specialists by integrating with different wearable and portable electronics. With the development of low-temperature solution preparation technology and the application of different engineering strategies, the power conversion efficiency of f-PSCs has approached 24%. Due to the inherent properties and application scenarios of f-PSCs, the study of strain in these devices is recognized as one of the key factors in obtaining ideal devices and promoting commercialization. The strains mainly from the change of bond and lattice volume can promote phase transformation, induce decomposition of perovskite film, decrease mechanical stability, etc. However, the effect of strain on the performance of f-PSCs has not been systematically summarized yet. Herein, the sources of strain, evaluation methods, impacts on f-PSCs, and the engineering strategies to modulate strain are summarized. Furthermore, the problems and future challenges in this regard are raised, and solutions and outlooks are offered. This review is dedicated to summarizing and enhancing the research into the strain of f-PSCs to provide some new insights that can further improve the optoelectronic performance and stability of flexible devices.

Temperature dependent characteristics of flexible p-PANI/n-ZnO based hybrid heterojunction diode

This study aims to develop and characterize a flexible p-PANI/n-ZnO heterojunction diode developed from a combination of electrochemical and sputtering technique. Investigation of structural properties and morphology of the thin films has been done from XRD and SEM analysis. To study the temperature effect on the electrical properties of the diode, current-voltage-temperature (I-V-T) measurements were done for the temperature range 25-300 K. Applying the ideal thermionic emission theory, various diode parameters like reverse saturation current, quality factor, series resistance and barrier height were computed utilizing the semilogarithmic plot ofI-Vcurve and Cheungs' method. Barrier height, reverse saturation current and quality factor calculated from ln(I)versusVcurve were observed to vary from 0.0627-0.725 eV, 0.236-98.8 nA and 54.43-3.29 respectively over the temperature range 25-300 K. It has been found that the series resistance falls with a rise in temperature. The barrier height, series resistance and ideality factor were observed to vary from 0.0628-0.692 eV, 15 900-46.8 Kohm and 41.88-2.27 respectively for the temperature range 25-300 K. The activation energy estimated from Arrhenius plot was observed to be 14.51 meV. Additionally, the fabricated PANI/ZnO diode was mechanically robust that can be bent without affecting its performance.

Piezoelectricity-modulated optical recombination dynamics of monolayer-MoS2/GaN-film heterostructures

Dynamic manipulation of optoelectronic responses by mechanical stimuli is promising for developing wearable electronics and human-machine interfacing. Although 2D-3D hybrid heterostructures can bring advancements in optoelectronics, their dynamic optical responses to external strains remain rarely studied. Here, we demonstrate the strain-tuned recombination dynamics of monolayer-MoS₂ and thin-film-GaN heterostructures. We find that optical excitons in the heterostructures, apart from trions, can be markedly modulated by strains. We argue that MoS₂ piezoelectric dipoles across the interfaces lead to curved band diagrams, in which optical excitons dissociate into spatially separated quasi-particles and concurrently relocate to the maxima of valence bands and the minima of conduction bands. With the increase in tensile strains, the photoluminescence (PL) intensity of the heterostructures shows quenched responses. Noticeably, the change in PL spectra strongly depends on the directions of the applied strains because of the lateral piezoelectric periodicity of MoS₂ flakes. This work not only helps in understanding the underlying physics of the decreased PL intensities upon applying strains but also demonstrates a feasible way (i.e., strains) to manipulate the PL efficiency of 2D-material-based optoelectronics.

Fundamentals and Applications of ZnO-Nanowire-Based Piezotronics and Piezo-Phototronics

The piezotronic effect is a coupling effect of semiconductor and piezoelectric properties. The piezoelectric potential is used to adjust the p-n junction barrier width and Schottky barrier height to control carrier transportation. At present, it has been applied in the fields of sensors, human-machine interaction, and active flexible electronic devices. The piezo-phototronic effect is a three-field coupling effect of semiconductor, photoexcitation, and piezoelectric properties. The piezoelectric potential generated by the applied strain in the piezoelectric semiconductor controls the generation, transport, separation, and recombination of carriers at the metal-semiconductor contact or p-n junction interface, thereby improving optoelectronic devices performance, such as photodetectors, solar cells, and light-emitting diodes (LED). Since then, the piezotronics and piezo-phototronic effects have attracted vast research interest due to their ability to remarkably enhance the performance of electronic and optoelectronic devices. Meanwhile, ZnO has become an ideal material for studying the piezotronic and piezo-phototronic effects due to its simple preparation process and better biocompatibility. In this review, first, the preparation methods and structural characteristics of ZnO nanowires (NWs) with different doping types were summarized. Then, the theoretical basis of the piezotronic effect and its application in the fields of sensors, biochemistry, energy harvesting, and logic operations (based on piezoelectric transistors) were reviewed. Next, the piezo-phototronic effect in the performance of photodetectors, solar cells, and LEDs was also summarized and analyzed. In addition, modulation of the piezotronic and piezo-phototronic effects was compared and summarized for different materials, structural designs, performance characteristics, and working mechanisms' analysis. This comprehensive review provides fundamental theoretical and applied guidance for future research directions in piezotronics and piezo-phototronics for optoelectronic devices and energy harvesting.

Elucidation of Strain-Dependent, Zinc Oxide Nanorod Response for Nanorod-Guided Fluorescence Intensity

In this work, we examine how strain exerted on individual ZnO nanorods (NRs) can influence the fluorescence signals that are emitted from fluorophore molecules and subsequently coupled into and guided along the NR. We elucidate the relationships between the incremental levels of compressive and tensile strain on the NRs and measured fluorescence intensity of a model fluorophore, rhodamine 6G (R6G), as a function of the position on the NRs. We reveal that compressive strain on the NRs leads to a decrease in the guided fluorescence signal, while tensile strain leads to an increase in the fluorescence intensity. Compared to an unstrained state, approximately 35% decrease (increase) in R6G fluorescence intensity was observed from ZnO NRs when they were under compressive strain of -14% (tensile strain of +10%). Further, our systematic acquisition of the incremental addition of uniaxial strain result in a linear relationship of the coupled fluorescence signal and the amount of applied strain. The degree of fluorescence intensification on nanorod ends (DoF), which is a quantitative indicator for the amount of R6G signals coupled into and waveguided to the NR ends compared to those on the main body, also exhibits a linear relationship with strain. These outcomes, in turn, demonstrate that strain alters the waveguiding capabilities of ZnO NRs in a predictable manner, which can be exploited to modulate and optimize fluorescence and other light signals emitted by a nearby source. Considering the wide utility of ZnO NRs in photonics, optoelectronics, and sensors, insights from our study may be highly valuable to effectively controlling and enhancing optical signals from chemical and biological analytes through strain.

Hierarchical Porous Cellulosic Triboelectric Materials for Extreme Environmental Conditions

Synthetic polymer materials such as paraformaldehyde and polyamides are widely used in the field of energy engineering. However, they pose a challenge to environmental sustainability because they are derived from petrochemicals that are non-renewable and difficult to degrade in the natural environment. The development of high-performance natural alternatives is clearly emerging as a promising mitigation option. Inspired by natural bamboo, this research reports a "three-step" strategy for the large-scale production of triboelectric materials with special nanostructures from natural bamboo. Benefiting from the special hierarchical porous structure of the material, Bamboo/polyaniline triboelectric materials can reach short-circuit current of 2.9 µA and output power of 1.1 W m^-2 at a working area of only 1 cm² , which exceeds most wood fiber-based triboelectric materials. More importantly, it maintains 85% energy harvesting after an extreme environment of high temperature (200 °C), low temperature (-196 °C), combustion environment, and multiple thermal shocks (ΔT = 396 °C). This is unmatched by current synthetic polymer materials. This work provides new research ideas for the construction and application of biomass structural materials under extreme environmental conditions.

Mitigating the Negative Piezoelectricity in Organic/Inorganic Hybrid Materials for High-performance Piezoelectric Nanogenerators

The conversion of ecofriendly waste energy into useable electrical energy is of significant interest for energy harvesting technologies. Piezoelectric nanogenerators based on organic/inorganic hybrid materials are a key promising technology for harvesting mechanical energy due to their high piezoelectric coefficient and good mechanical flexibility. However, the negative piezoelectric effect of the polymer component in composite devices severely undermines its overall piezoelectricity, compromising the output performance of PVDF-based piezoelectric hybrid nanogenerators. Here, to conquer this, we report a two-step poling schedule to orient the dipoles of organic and inorganic components in the same direction. The optimized nanogenerator delivers a combination of high piezoelectric coefficient, great output performance, and remarkable stability. The isotropic piezoelectricity in the composite device collaborates to output a maximum voltage of 110 V and a power density of 7.8 μW cm^-2. This strategy is also applied to elevate the piezoelectricity of other organic/inorganic-hybrid-based nanogenerators, substantiating its universal applicability for composite piezoelectric nanogenerators. This study presents a feasible strategy for enhancing the effective output capability of composite nanogenerator technologies.

Piezo-phototronic effect on photocatalysis, solar cells, photodetectors and light-emitting diodes

The piezo-phototronic effect (a coupling effect of piezoelectric, photoexcitation and semiconducting properties, coined in 2010) has been demonstrated to be an ingenious and robust strategy to manipulate optoelectronic processes by tuning the energy band structure and photoinduced carrier behavior. The piezo-phototronic effect exhibits great potential in improving the quantum yield efficiencies of optoelectronic materials and devices and thus could help increase the energy conversion efficiency, thus alleviating the energy shortage crisis. In this review, the fundamental principles and challenges of representative optoelectronic materials and devices are presented, including photocatalysts (converting solar energy into chemical energy), solar cells (generating electricity directly under light illumination), photodetectors (converting light into electrical signals) and light-emitting diodes (LEDs, converting electric current into emitted light signals). Importantly, the mechanisms of how the piezo-phototronic effect controls the optoelectronic processes and the recent progress and applications in the above-mentioned materials and devices are highlighted and summarized. Only photocatalysts, solar cells, photodetectors, and LEDs that display piezo-phototronic behavior are reviewed. Material and structural design, property characterization, theoretical simulation calculations, and mechanism analysis are then examined as strategies to further enhance the quantum yield efficiency of optoelectronic devices via the piezo-phototronic effect. This comprehensive overview will guide future fundamental and applied studies that capitalize on the piezo-phototronic effect for energy conversion and storage.

Recent Development of Multifunctional Sensors Based on Low-Dimensional Materials

With the demand for accurately recognizing human actions and environmental situations, multifunctional sensors are essential elements for smart applications in various emerging technologies, such as smart robots, human-machine interface, and wearable electronics. Low-dimensional materials provide fertile soil for multifunction-integrated devices. This review focuses on the multifunctional sensors for mechanical stimulus and environmental information, such as strain, pressure, light, temperature, and gas, which are fabricated from low-dimensional materials. The material characteristics, device architecture, transmission mechanisms, and sensing functions are comprehensively and systematically introduced. Besides multiple sensing functions, the integrated potential ability of supplying energy and expressing and storing information are also demonstrated. Some new process technologies and emerging research areas are highlighted. It is presented that optimization of device structures, appropriate material selection for synergy effect, and application of piezotronics and piezo-phototronics are effective approaches for constructing and improving the performance of multifunctional sensors. Finally, the current challenges and direction of future development are proposed.

Generating large out-of-plane piezoelectric properties of atomically thin MoS2via defect engineering

We calculated the piezoelectric properties of asymmetrically defected MoS₂ using density functional theory. By creating uneven numbers of defects on either side of two-dimensional MoS₂, the out-of-plane centrosymmetry of the charge distribution is clearly broken, and the out-of-plane piezoelectric response is induced. The largest out-of-plane piezoelectric response is associated with the highest defect ratio for MoS₂ to be semiconducting. We calculated the critical defect density of the metal-insulator transition of the asymmetrically defected MoS₂ to be 9.90 × 10¹⁴ cm^-2 and chemical formula MoS_1.22. The d₃₃ of the multilayer of optimally defected MoS₂ is found to be greater than those of AlN and ZnO, and in the same order of magnitude as lead zirconate titanate. All two-dimensional transition metal dichalcogenides can in principle be fabricated as piezoelectric with this approach. The required defect engineering is readily available with various types of ion irradiation or plasma treatment. By controlling the dose of the ion, the defect ratio and hence the piezoelectricity can be tuned. Such asymmetrically defected transition metal dichalcogenides can easily be integrated into two-dimensional transition metal dichalcogenide based devices, which is hard for conventional piezoelectric thin films to rival.

Ultrafast and Highly Stable Photodetectors Based on p-GeSe/n-ReSe2 Heterostructures

Two-dimensional transition-metal dichalcogenide (2D-TMD) semiconductors and their van der Waals heterostructures (vdWHs) have attracted great attention because of their tailorable band-engineering properties and provide a propitious platform for next-generation extraordinary performance energy-harvesting devices. Herein, we reported unique and unreported germanium selenide/rhenium diselenide (p-GeSe/n-ReSe₂) 2D-TMD vdWH photodetectors for extremely sensitive and high-performance photodetection in the broadband spectral range (visible and near-infrared range). A high and gate-tunable rectification ratio (RR) of 7.34 × 10⁵ is achieved, stemming from the low Schottky barrier contacts and sharp interfaces of the p-GeSe/n-ReSe₂ 2D-TMD vdWHs. In addition, a noticeably high responsivity (R = 2.89 × 10⁵ A/W) and specific detectivity (D* = 4.91 × 10¹³ Jones), with good external quantum efficiency (EQE = 6.1 × 10⁵) are obtained because of intralayer and interlayer transition of excitations, enabling the broadband photoresponse (λ = 532-1550 nm) at room temperature. Furthermore, fast response times of 16-20 μs are estimated under the irradiated laser of λ = 1550 nm because of interlayer exciton transition. Such a TMD-based compact system offers an opportunity for the realization of high-performance broadband infrared photodetectors.

Enhanced-Performance Self-Powered Solar-Blind UV-C Photodetector Based on n-ZnO Quantum Dots Functionalized by p-CuO Micro-pyramids

Smart solar-blind UV-C band photodetectors suffer from low responsivity in a self-powered mode. Here, we address this issue by fabricating a novel enhanced solar-blind UV-C photodetector array based on solution-processed n-ZnO quantum dots (QDs) functionalized by p-CuO micro-pyramids. Self-assembled catalyst-free p-CuO micro-pyramid arrays are fabricated on a pre-ablated Si substrate by pulsed laser deposition without a need for a catalyst layer or seeding, while the solution-processed n-ZnO QDs are synthesized by the femtosecond-laser ablation in liquid technique. The photodetector is fabricated by spray-coating ZnO QDs on a CuO micro-pyramid array. The photodetector performance is optimized via a p-n junction structure as both p-ZnO QDs and p-CuO micro-pyramid layers are characterized by wide band gap energies. Two photodetectors (with and without CuO micro-pyramids) are fabricated to show the role of p-CuO in enhancing the device performance. The n-ZnO QD/p-CuO micro-pyramid/Si photodetector is characterized by a superior photo-responsivity of ∼956 mA/W at 244 nm with a faster photoresponse (<80 ms) and 260 nm cut-off compared to ZnO QDs/Si photodetectors, confirming that the p-CuO micro-pyramids enhance the device performance. The self-powered photoresponse with a high photo-responsivity of ∼29 mA/W is demonstrated. These high-responsivity solar-bind UV-C photodetector arrays can be used for a wide range of applications.

Applications of 2D-Layered Palladium Diselenide and Its van der Waals Heterostructures in Electronics and Optoelectronics

The rapid development of two-dimensional (2D) transition-metal dichalcogenides has been possible owing to their special structures and remarkable properties. In particular, palladium diselenide (PdSe₂) with a novel pentagonal structure and unique physical characteristics have recently attracted extensive research interest. Consequently, tremendous research progress has been achieved regarding the physics, chemistry, and electronics of PdSe₂. Accordingly, in this review, we recapitulate and summarize the most recent research on PdSe₂, including its structure, properties, synthesis, and applications. First, a mechanical exfoliation method to obtain PdSe₂ nanosheets is introduced, and large-area synthesis strategies are explained with respect to chemical vapor deposition and metal selenization. Next, the electronic and optoelectronic properties of PdSe₂ and related heterostructures, such as field-effect transistors, photodetectors, sensors, and thermoelectric devices, are discussed. Subsequently, the integration of systems into infrared image sensors on the basis of PdSe₂ van der Waals heterostructures is explored. Finally, future opportunities are highlighted to serve as a general guide for physicists, chemists, materials scientists, and engineers. Therefore, this comprehensive review may shed light on the research conducted by the 2D material community.

Highly Sensitive, Ultrafast, and Broadband Photo-Detecting Field-Effect Transistor with Transition-Metal Dichalcogenide van der Waals Heterostructures of MoTe2 and PdSe2

Recently, van der Waals heterostructures (vdWHs) based on transition-metal dichalcogenides (TMDs) have attracted significant attention owing to their superior capabilities and multiple functionalities. Herein, a novel vdWH field-effect transistor (FET) composed of molybdenum ditelluride (MoTe2 ) and palladium diselenide (PdSe2 ) is studied for highly sensitive photodetection performance in the broad visible and near-infrared (VNIR) region. A high rectification ratio of 6.3 × 105 is obtained, stemming from the sharp interface and low Schottky barriers of the MoTe2 /PdSe2 vdWHs. It is also successfully demonstrated that the vdWH FET exhibits highly sensitive photo-detecting abilities, such as noticeably high photoresponsivity (1.24 × 105 A W-1 ), specific detectivity (2.42 × 1014 Jones), and good external quantum efficiency (3.5 × 106 ), not only due to the intra-TMD band-to-band transition but also due to the inter-TMD charge transfer (CT) transition. Further, rapid rise (16.1 µs) and decay (31.1 µs) times are obtained under incident light with a wavelength of 2000 nm due to the CT transition, representing an outcome one order of magnitude faster than values currently in the literature. Such TMD-based vdWH FETs would improve the photo-gating characteristics and provide a platform for the realization of a highly sensitive photodetector in the broad VNIR region.

Thickness-modulated lateral MoS2 diodes with sub-terahertz cutoff frequency

Thickness-modulated lateral MoS2 diodes with an extracted benchmark cutoff frequency (fc) of up to 126 GHz are implemented and fully characterised. Fabricated diodes demonstrate an on-off current ratio of more than 600 and a short circuit current responsivity at zero-bias of 7 A/W. The excellent performance achieved in our device is attributed to reduced contact resistance from using In/Au contacts and low junction capacitance due to the lateral device structure. In addition, the use of multilayer MoS2 crystals enabled relatively high current flow. Small- and large-signal models are extracted from DC and RF characterisation of the fabricated diode prototype. Extracted compact models are compared to the measured DC and S-parameters of the diode, demonstrating excellent matching between models and measurements. The presented diode is suitable for switching circuits and high frequency applications.

Effect of Asymmetry Mechanical Loads on the Potential Barrier Region of a Piezoelectric pn Junction

The nonlinear governing equations on the coupling between electromechanical fields and charge carrier in a thermal equilibrium piezoelectric pn junction subjected to asymmetric mechanical loads are established in this article. Effect of mechanical loads on the basic physical parameters of a piezoelectric pn junction, such as potential barrier region width, contact potential difference, electric potential, and carrier concentrations are analyzed numerically. Results show that asymmetry compressive stresses exert more influence on the movement of the potential barrier region's boundary and the migration of carrier compare to asymmetry tensile stresses. It is also found that asymmetry compressive stresses lead to a pn junction with a thin potential barrier region which enhances the chance of carrier's passing through of potential barrier region. The obtained results are useful in reducing the disadvantage of capacitance on rectification characteristic and can be used to tune the I - V characteristic of the pn junction working with bias voltage.

Self-powered broadband photodetector based on a solution-processed p-NiO/n-CdS:Al heterojunction

Solution-processed photodetectors have emerged as the next generation of sensing technology owing to their ease of integration with electron devices and of tuning photodetector performance. Currently, novel self-powered photodetectors without an external power source, for use in sensing, imaging and communication, are in high demand. Herein, we successfully developed a self-powered photodetector based on a novel solution-processed p-NiO/n-CdS:Al heterojunction, which shows an excellent current rectification characteristic ratio of up to three orders in the dark and distinctive photovoltaic behavior under light illumination. The complete solution synthesis route followed the development of CdS:Al thin films on ITO substrates by chemical bath deposition and NiO thin films by the sol-gel route. Optical absorption data revealed that NiO is more active in the UV region and CdS:Al has a majority of absorption in the visible region; so, upon light illumination, the effective separation of photogenerated carriers produces fast photodetection in the UV-visible region. The photoresponsivity values of the fabricated device were calculated to be 55 mA W^-1 and 30 mA W^-1 for UV and visible illumination, respectively. Also, the device has a fast rise and decay photoresponse speed at zero bias voltage, due to the self-driven photovoltaic effect which makes this heterojunction a self-powered device. This complete solution and new method of fabrication make it possible to combine different materials and flexible substrates, enhancing its potential applications in photodetectors, optoelectronic devices and sensors.

NIR self-powered photodetection and gate tunable rectification behavior in 2D GeSe/MoSe2 heterojunction diode

Two-dimensional (2D) heterostructure with atomically sharp interface holds promise for future electronics and optoelectronics because of their multi-functionalities. Here we demonstrate gate-tunable rectifying behavior and self-powered photovoltaic characteristics of novel p-GeSe/n-MoSe2 van der waal heterojunction (vdW HJ). A substantial increase in rectification behavior was observed when the devices were subjected to gate bias. The highest rectification of ~ 1 × 104 was obtained at Vg = - 40 V. Remarkable rectification behavior of the p-n diode is solely attributed to the sharp interface between metal and GeSe/MoSe2. The device exhibits a high photoresponse towards NIR (850 nm). A high photoresponsivity of 465 mAW-1, an excellent EQE of 670%, a fast rise time of 180 ms, and a decay time of 360 ms were obtained. Furthermore, the diode exhibits detectivity (D) of 7.3 × 109 Jones, the normalized photocurrent to the dark current ratio (NPDR) of 1.9 × 1010 W-1, and the noise equivalent power (NEP) of 1.22 × 10-13 WHz-1/2. The strong light-matter interaction stipulates that the GeSe/MoSe2 diode may open new realms in multi-functional electronics and optoelectronics applications.

Surface Modification of Monolayer MoS2 by Baking for Biomedical Applications

Molybdenum disulfide (MoS₂), a transition metal dichalcogenide material, possesses great potential in biomedical applications such as chemical/biological sensing, drug/gene delivery, bioimaging, phototherapy, and so on. In particular, monolayer MoS₂ has more extensive applications because of its superior physical and chemical properties; for example, it has an ultra-high surface area, is easily modified, and has high biodegradability. It is important to prepare advanced monolayer MoS₂ with enhanced energy exchange efficiency (EEE) for the development of MoS₂-based nanodevices and therapeutic strategies. In this work, a monolayer MoS₂ film was first synthesized through a chemical vapor deposition method, and the surface of MoS₂ was further modified via a baking process to develop p-type doping of monolayer MoS₂ with high EEE, followed by confirmation by X-ray photoelectron spectroscopy and Raman spectroscopy analysis. The morphology, surface roughness, and layer thickness of monolayer MoS₂ before and after baking were thoroughly investigated using atomic force microscopy. The results showed that the surface roughness and layer thickness of monolayer MoS₂ modified by baking were obviously increased in comparison with MoS₂ without baking, indicating that the surface topography of the monolayer MoS₂ film was obviously influenced. Moreover, a photoluminescence spectrum study revealed that p-type doping of monolayer MoS₂ displayed much greater photoluminescence ability, which was taken as evidence of higher photothermal conversion efficiency. This study not only developed a novel MoS₂ with high EEE for future biomedical applications but also demonstrated that a baking process is a promising way to modify the surface of monolayer MoS₂.

Design and Integration of a Layered MoS2/GaN van der Waals Heterostructure for Wide Spectral Detection and Enhanced Photoresponse

Molybdenum disulfide (MoS₂) as a typical two-dimensional (2D) transition-metal dichalcogenide exhibits great potential applications for the next-generation nanoelectronics such as photodetectors. However, most MoS₂-based photodetectors hold obvious disadvantages including a narrow spectral response in the visible region, poor photoresponsivity, and slow response speed. Here, for the first time, we report the design of a two-dimensional MoS₂/GaN van der Waals (vdWs) heterostructure photodetector consisting of few-layer p-type MoS₂ and very thin n-type GaN flakes. Thanks to the good crystal quality of the 2D-GaN flake and the built-in electric field in the interface depletion region of the MoS₂/GaN p-n junction, photogenerated carriers can be rapidly separated and more excitons are collected by electrodes toward the high photoresponsivity of 328 A/W and a fast response time of 400 ms under the illumination of 532 nm light, which is seven times faster than pristine MoS₂ flake. Additionally, the response spectrum of the photodetector is also broadened to the UV region with a high photoresponsivity of 27.1 A/W and a fast response time of 300 ms after integrating with the 2D-GaN flake, exhibiting an advantageous synergetic effect. These excellent performances render MoS₂/GaN vdWs heterostructure photodetectors as promising and competitive candidates for next-generation optoelectronic devices.

A review of molybdenum disulfide (MoS2) based photodetectors: from ultra-broadband, self-powered to flexible devices

Two-dimensional transition metal dichalcogenides (2D TMDs) have attracted much attention in the field of optoelectronics due to their tunable bandgaps, strong interaction with light and tremendous capability for developing diverse van der Waals heterostructures (vdWHs) with other materials. Molybdenum disulfide (MoS2) atomic layers which exhibit high carrier mobility and optical transparency are very suitable for developing ultra-broadband photodetectors to be used from surveillance and healthcare to optical communication. This review provides a brief introduction to TMD-based photodetectors, exclusively focused on MoS2-based photodetectors. The current research advances show that the photoresponse of atomic layered MoS2 can be significantly improved by boosting its charge carrier mobility and incident light absorption via forming MoS2 based plasmonic nanostructures, halide perovskites-MoS2 heterostructures, 2D-0D MoS2/quantum dots (QDs) and 2D-2D MoS2 hybrid vdWHs, chemical doping, and surface functionalization of MoS2 atomic layers. By utilizing these different integration strategies, MoS2 hybrid heterostructure-based photodetectors exhibited remarkably high photoresponsivity raging from mA W-1 up to 1010 A W-1, detectivity from 107 to 1015 Jones and a photoresponse time from seconds (s) to nanoseconds (10-9 s), varying by several orders of magnitude from deep-ultraviolet (DUV) to the long-wavelength infrared (LWIR) region. The flexible photodetectors developed from MoS2-based hybrid heterostructures with graphene, carbon nanotubes (CNTs), TMDs, and ZnO are also discussed. In addition, strain-induced and self-powered MoS2 based photodetectors have also been summarized. The factors affecting the figure of merit of a very wide range of MoS2-based photodetectors have been analyzed in terms of their photoresponsivity, detectivity, response speed, and quantum efficiency along with their measurement wavelengths and incident laser power densities. Conclusions and the future direction are also outlined on the development of MoS2 and other 2D TMD-based photodetectors.

Substitutional Fluorine Doping of Large-Area Molybdenum Disulfide Monolayer Films for Flexible Inverter Device Arrays

Reliable and controllable doping of transition metal dichalcogenides (TMDCs) is a mandatory requirement for practical large-scale electronic applications. However, most of the literature on the doping methodologies of TMDCs has focused on n-type doping and multilayer TMDC rather than a monolayer one enabling large-scale growth. Herein, we report substitutional fluorine doping of a chemical vapor deposition (CVD)-grown molybdenum disulfide (MoS₂) monolayer film using a delicate SF₆ plasma treatment. Our SF₆-treated MoS₂ monolayer shows a p-type doping effect with fluorine substitution. The doping concentration is controlled by the plasma treatment time (2-4.9 atom %) while maintaining the structural integrity of the MoS₂ monolayer. Such reliable and tunable substitutional doping is attributed to preventing direct ion bombardment to the MoS₂ monolayer by our gentle plasma treatment system. Finally, we fabricated MoS₂ homojunction flexible inverter device arrays based on the pristine and SF₆-treated MoS₂ monolayer. A clear switching behavior is observed, and the voltage gain is approximately 8 at an applied V_DD of 2 V, which is comparable to that of CVD-grown MoS₂-based inverter devices reported previously. Obtained voltage gain is also stable even after 500 bending cycles at an applied strain of 0.5%.

Emerging Opportunities for Electrostatic Control in Atomically Thin Devices

Electrostatic control of charge carrier concentration underlies the field-effect transistor (FET), which is among the most ubiquitous devices in the modern world. As transistors and related electronic devices have been miniaturized to the nanometer scale, electrostatics have become increasingly important, leading to progressively sophisticated device geometries such as the finFET. With the advent of atomically thin materials in which dielectric screening lengths are greater than device physical dimensions, qualitatively different opportunities emerge for electrostatic control. In this Review, recent demonstrations of unconventional electrostatic modulation in atomically thin materials and devices are discussed. By combining low dielectric screening with the other characteristics of atomically thin materials such as relaxed requirements for lattice matching, quantum confinement of charge carriers, and mechanical flexibility, high degrees of electrostatic spatial inhomogeneity can be achieved, which enables a diverse range of gate-tunable properties that are useful in logic, memory, neuromorphic, and optoelectronic technologies.

Recent Advances in Strain-Induced Piezoelectric and Piezoresistive Effect-Engineered 2D Semiconductors for Adaptive Electronics and Optoelectronics

The development of two-dimensional (2D) semiconductors has attracted widespread attentions in the scientific community and industry due to their ultra-thin thickness, unique structure, excellent optoelectronic properties and novel physics. The excellent flexibility and outstanding mechanical strength of 2D semiconductors provide opportunities for fabricated strain-sensitive devices and utilized strain tuning their electronic and optic-electric performance. The strain-engineered one-dimensional materials have been well investigated, while there is a long way to go for 2D semiconductors. In this review, starting with the fundamental theories of piezoelectric and piezoresistive effect resulted by strain, following we reviewed the recent simulation works of strain engineering in novel 2D semiconductors, such as Janus 2D and 2D-Xene structures. Moreover, recent advances in experimental observation of strain tuning PL spectra and transport behavior of 2D semiconductors are summarized. Furthermore, the applications of strain-engineered 2D semiconductors in sensors, photodetectors and nanogenerators are also highlighted. At last, we in-depth discussed future research directions of strain-engineered 2D semiconductor and related electronics and optoelectronics device applications.

High-Performance p-BP/n-PdSe2 Near-Infrared Photodiodes with a Fast and Gate-Tunable Photoresponse

Van der Waals heterostructures composed of transition-metal dichalcogenide (TMD) materials have become a remarkable compact system that could offer an innovative architecture for advanced engineering in high-performance energy-harvesting and optoelectronic devices. Here, we report a novel van der Waals (vdW) TMD heterojunction photodiode composed of black phosphorus (p-BP) and palladium diselenide (n-PdSe₂), which establish a high and tunable rectification and photoresponsivity. A high rectification up to ≈7.1 × 10⁵ is achieved, which is successfully tuned by employing the back-gate voltage to the heterostructure devices. Besides, the device significantly shows the high and gate-controlled photoresponsivity of R = 9.6 × 10⁵, 4.53 × 10⁵ and 1.63 × 10⁵ A W^-1 under the influence of light of different wavelengths (λ = 532, 1064, and 1310 nm) in visible and near-infrared regions, respectively, because of interlayer optical transition and low Schottky. The device also demonstrates extraordinary values of detectivity (D = 5.8 × 10¹³ Jones) and external quantum efficiency (EQE ≈ 9.4 × 10⁶), which are an order of magnitude higher than the currently reported values. The effective enhancement of photovoltaic characteristics in visible and infrared regions of this TMD heterostructure-based system has a huge potential in the field of optoelectronics to realize high-performance infrared photodetectors.

Gate-Tunable Semiconductor Heterojunctions from 2D/3D van der Waals Interfaces

van der Waals (vdW) semiconductors are attractive for highly scaled devices and heterogeneous integration as they can be isolated into self-passivated, two-dimensional (2D) layers that enable superior electrostatic control. These attributes have led to numerous demonstrations of field-effect devices ranging from transistors to triodes. By exploiting the controlled, substitutional doping schemes in covalently bonded, three-dimensional (3D) semiconductors and the passivated surfaces of 2D semiconductors, one can construct devices that can exceed performance metrics of "all-2D" vdW heterojunctions. Here, we demonstrate 2D/3D semiconductor heterojunctions using MoS₂ as the prototypical 2D semiconductor laid upon Si and GaN as the 3D semiconductor layers. By tuning the Fermi levels in MoS₂, we demonstrate devices that concurrently exhibit over 7 orders of magnitude modulation in rectification ratios and conductance. Our results further suggest that the interface quality does not necessarily affect Fermi level tuning at the junction, opening up possibilities for novel 2D/3D heterojunction device architectures.

A ZnS/CaZnOS Heterojunction for Efficient Mechanical-to-Optical Energy Conversion by Conduction Band Offset

Actively collecting the mechanical energy by efficient conversion to other forms of energy such as light opens a new possibility of energy-saving, which is of pivotal significance for supplying potential solutions for the present energy crisis. Such energy conversion has shown promising applications in modern sensors, actuators, and energy harvesting. However, the implementation of such technologies is being hindered because most luminescent materials show weak and non-recoverable emissions under mechanical excitation. Herein, a new class of heterojunctioned ZnS/CaZnOS piezophotonic systems is presented, which displays highly reproducible mechanoluminescence (ML) with an unprecedented intensity of over two times higher than that of the widely used commercial ZnS (the state-of-the-art ML material). Density functional theory calculations reveal that the high-performance ML originates from efficient charge transfer and recombination through offset of the valence and conduction bands in the heterojunction interface region. By controlling the ZnS-to-CaZnOS ratio in conjunction with manganese (Mn²⁺ ) and lanthanide (Ln³⁺ ) doping, tunable ML across the full spectrum is activated by a small mechanical stimulus of 1 N (10 kPa). The findings demonstrate a novel strategy for constructing efficient ML materials by leveraging interface effects and ultimately promoting practical applications for ML.

Peculiar piezoelectricity of atomically thin planar structures

The emergence of piezoelectricity in two-dimensional (2D) materials has represented a milestone towards employing low-dimensional structures for future technologies. 2D piezoelectric materials possess unique and unprecedented characteristics that cannot be found in other morphologies; therefore, the applications of piezoelectricity can be substantially extended. By reducing the thickness into the 2D realm, piezoelectricity might be induced in otherwise non-piezoelectric materials. The origin of the enhanced piezoelectricity in such thin planes is attributed to the loss of centrosymmetry, altered carrier concentration, and change in local polarization and can be efficiently tailored via surface modifications. Access to such materials is important from a fundamental research point of view, to observe the extraordinary interactions between free charge carriers, phonons and photons, and also with respect to device development, for which planar structures provide the required compatibility with the large-scale fabrication technologies of integrated circuits. The existence of piezoelectricity in 2D materials presents great opportunities for applications in various fields of electronics, optoelectronics, energy harvesting, sensors, actuators and biotechnology. Additionally, 2D flexible nanostructures with superior piezoelectric properties are distinctive candidates for integration into nano-scale electromechanical systems. Here we fundamentally review the state of the art of 2D piezoelectric materials from both experimental and theoretical aspects and report the recent achievements in the synthesis, characterization and applications of these materials.

Tunneling-based rectification and photoresponsivity in black phosphorus/hexagonal boron nitride/rhenium diselenide van der Waals heterojunction diode

Tunneling-based van der Waals (vdW) heterostructures composed of layered transition metal dichalcogenides (TMDs) are emerging as a unique compact system that provides new research avenues in electronics and optoelectronics. Here, we designed a black phosphorus (BP)/rhenium diselenide (ReSe2) and black phosphorus (BP)/hexagonal boron nitride (h-BN)/rhenium diselenide (ReSe2) vdW heterojunction-based diode and studied the tunneling-based different phenomena, such as rectification, negative differential resistance (NDR) and backward rectification. Further, we measured a gate-tunable and tunneling-based rectifying current in BP/ReSe2 and BP/h-BN/ReSe2 heterojunction diodes, and achieved the highest tunneling-based rectification ratio of up to (RR ≈ 3.4 × 107). The high rectifying current is explained using the Simmons-based approximation through direct tunneling (DT) and Fowler-Nordheim tunneling (FNT) in low and high bias regimes. Furthermore, we extracted the photoresponsivity (R ≈ 12 mA W-1) and external quantum efficiency (EQE ≈ 2.79%) under an illuminated laser light source of wavelength 532 nm. Finally, we demonstrated the potential application of our heterostructure devices, such as a binary inverter, rectifier and switching operation at a high frequency. Our tunneling-based heterostructure device could operate at frequencies up to the GHz range. Therefore, our findings provide a new paragon to use the TMD-based vdW heterostructure in electronic and optoelectronic applications, such as multi-valued logic.

Plasmon-enhanced high-performance Si-based light sources by incorporating alloyed Au and Ag nanorods

Benefitting from alloyed Au and Ag nanorods with desired plasmons, single ZnO:Ga microwire assembled on a p-Si template, can provide a promising candidate for the realization of high-efficiency Si-based light sources

UV-Visible Photodetector Based on I-type Heterostructure of ZnO-QDs/Monolayer MoS2

Monolayer MoS₂ has shown excellent photoresponse properties, but its promising applications in high-sensitivity photodetection suffer from the atomic-thickness-limited adsorption and band gap-limited spectral selectivity. Here we have carried out investigations on MoS₂ monolayer-based photodetectors with and without decoration of ZnO quantum dots (ZnO-QDs) for comparison. Compared with monolayer MoS₂ photodetectors, the monolayer ZnO-QDs/MoS₂ hybrid device exhibits faster response speed (1.5 s and 1.1 s, respectively), extended broadband photoresponse range (deep UV-visible), and enhanced photoresponse in visible spectrum, such as higher responsivity over 0.084 A/W and larger detectivity of 1.05 × 10¹¹ Jones, which results from considerable injection of carries from ZnO-QDs to MoS₂ due to the formation of I-type heterostructure existing in the contact interface of them.

A Fermi-Level-Pinning-Free 1D Electrical Contact at the Intrinsic 2D MoS2 -Metal Junction

Currently 2D crystals are being studied intensively for use in future nanoelectronics, as conventional semiconductor devices face challenges in high power consumption and short channel effects when scaled to the quantum limit. Toward this end, achieving barrier-free contact to 2D semiconductors has emerged as a major roadblock. In conventional contacts to bulk metals, the 2D semiconductor Fermi levels become pinned inside the bandgap, deviating from the ideal Schottky-Mott rule and resulting in significant suppression of carrier transport in the device. Here, MoS₂ polarity control is realized without extrinsic doping by employing a 1D elemental metal contact scheme. The use of high-work-function palladium (Pd) or gold (Au) enables a high-quality p-type dominant contact to intrinsic MoS₂ , realizing Fermi level depinning. Field-effect transistors (FETs) with Pd edge contact and Au edge contact show high performance with the highest hole mobility reaching 330 and 432 cm² V^-1 s^-1 at 300 K, respectively. The ideal Fermi level alignment allows creation of p- and n-type FETs on the same intrinsic MoS₂ flake using Pd and low-work-function molybdenum (Mo) contacts, respectively. This device acts as an efficient inverter, a basic building block for semiconductor integrated circuits, with gain reaching 15 at V_D = 5 V.

Bias-Controlled Tunable Electronic Transport with Memory Characteristics in an Individual ZnO Nanowire for Realization of a Self-Driven UV Photodetector with Two Symmetrical Electrodes

ZnO nanostructures are exceedingly important building blocks for nanodevices due to their wide band gap and large exciton binding energy. However, their electronic transport characteristics are unstable and unrepeatable with external environment variation. Here, we demonstrate that electron transport of an individual ZnO nanowire-based device with the two same electrodes can be controllably modulated by applying a relatively large uni-/bidirectional bias. After being modulated, moreover, their electrical properties can well be maintained at relatively low operation bias and room temperature, demonstrating a memory behavior. The presence of surface states related to lattice periodicity breaking and traps associated with oxygen vacancy (V_o) and zinc interstitial (Zn_i) deep-level defects plays a crucial role in tunable electron transport with a memory feature. For the single nanowire-based two-terminal device, two back-to-back connected surface barrier diodes with series resistance are formed. The filling and emptying of traps near two end electrodes can remarkably adjust the width and height of the surface barrier. At a relatively low bias, the unmodulated conductance is governed by the electron hopping of bulk traps since the height of emptied traps is higher than that of the surface barrier, whereas at a relatively large bias, it is dominated by thermion emission due to a dramatic decrease of the surface barrier width resulting from the electron injection into traps from a negative electrode. Moreover, it will be beneficial for a thin surface barrier to penetrate UV light and separate photoexcited electron-hole pairs. After being asymmetrically modulated by a unidirectional injection, it can be successfully applied to realize a self-driven UV photodetector based on a photovoltaic effect in the symmetrical two-electrode structure. Our work provides a new route to tune electrical properties of nanostructures, which may inspire the development of novel electronic and optoelectronic devices.

Black Phosphorus-IGZO van der Waals Diode with Low-Resistivity Metal Contacts

There have been a few studies of heterojunctions composed of two-dimensional transition-metal dichalcogenides (TMDs) and an oxide layer, but such studies of high-performance electric and optoelectronic devices are essential. Such heterojunctions with low-resistivity metal contacts are needed by the electronics industry to fabricate efficient diodes and photovoltaic devices. Here, a van der Waals heterojunction composed of p-type black phosphorus (p-BP) and n-type indium-gallium-zinc oxide (n-IGZO) films with low-resistivity metal contacts is reported, and it demonstrates high rectification. The low off-state leakage current in the thick IGZO film accounts for the high rectification ratio in a sharp interface of p-BP/n-IGZO devices. For electrostatic gate control, an ionic liquid is introduced to achieve a high rectification ratio of 9.1 × 10⁴. The photovoltaic measurements of p-BP/n-IGZO show fast rise and decay times, significant open-circuit voltage and short-circuit current, and a high photoresponsivity of 418 mA/W with a substantial external quantum efficiency of 12.1%. The electric and optoelectronic characteristics of TMDs/oxide layer van der Waals heterojunctions are attractive for industrial applications in the near future.

Large-Area Ultraviolet Photodetectors Based on p-Type Multilayer MoS2 Enabled by Plasma Doping

Two-dimensional (2D) MoS2 has recently become of interest for applications in broad range photodetection due to their tunable bandgap. In order to develop 2D MoS2 photodetectors with ultrafast response and high responsivity, up-scalable techniques for realizing controlled p-type doping in MoS2 is necessary. In this paper, we demonstrate a p-type multilayer MoS2 photodetector with selective-area doping using CHF3 plasma treatment. Microscopic and spectroscopic characterization techniques, including atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), are used to investigate the morphological and electrical modification of the p-type doped MoS2 surface after CHF3 plasma treatment. Back-gated p-type MoS2 field-effect transistors (FETs) are fabricated with an on/off current ratio in the order of 103 and a field-effect mobility of 65.2 cm2V−1s−1. They exhibit gate-modulated ultraviolet photodetection with a rapid response time of 37 ms. This study provides a promising approach for the development of mild plasma-doped MoS2 as a 2D material in post-silicon electronic and optoelectronic device applications.

A piezo-phototronic enhanced serrate-structured ZnO-based heterojunction photodetector for optical communication

ZnO-based heterojunction photodetectors have been widely used in various fields such as optical imaging and health monitoring. As for the traditional planar heterojunction interface, their limited optical absorption will place restrictions on the full photoelectric potential of ZnO nanorods, which severely restrains the commercial applications of ZnO-based photodetectors. Herein, using an intrinsically octahedral structure of p-type Cu2O and one-dimensional ZnO arrays, the newly designed serrate-structured heterojunction was constructed, whose unique serrate-structured interface of ZnO/Cu2O is highly conducive to the aggrandizing of optical absorption. The as-fabricated photodetector could achieve a high on/off ratio up to 1000 and an optimum photocurrent of 24.90 μA under 1.41 mW mm-2 (405 nm) illumination without bias voltage, which was 2.5 times higher than that of the planar-structured photodetector, and the response time was as quick as 1.6 ms. When the additional external strain was 0.39%, the performance was dramatically enhanced more than 5 times due to the synergism of the piezo-phototronic effect and the serrate-structured design. Based on this, we successfully developed designed photodetector arrays with an excellent optical communication performance of transmitting information. Prospectively, this kind of unique serrate-structured heterojunction design will open up a possible opportunity for high performance photodetectors based on structural engineering.

Piezoelectric Effect Tuning on ZnO Microwire Whispering-Gallery Mode Lasing

We report a dynamic tuning on coherent light emission wavelengths of single ZnO microwire by using the piezoelectric effect. Owing to the dominant role occupied by the piezoelectric polarization effect in the wurtzite-structure ZnO microwire, the effective dielectric constant (or refraction index) of the gain media was modulated toward an increasing trend by applying a tensile strain, resulting in a shift of the strain-mediated whispering-gallery mode (WGM) lasing at room temperature. Also, the strain required to resolve the spectra in the two operating types of PL and lasing were systematically analyzed and compared. Because of the narrow line width in the lasing mode, the strain-dependent spectral resolution was improved by an order of magnitude, making it feasible for achieving high-precision, ultrasensitive, and noncontact stress sensing. Our results have an important impact on laser modulation, optical communication, and optical sensing technology.

Recent Progress and Future Prospects of 2D-Based Photodetectors

Conventional semiconductors such as silicon- and indium gallium arsenide (InGaAs)-based photodetectors have encountered a bottleneck in modern electronics and photonics in terms of spectral coverage, low resolution, nontransparency, nonflexibility, and complementary metal-oxide-semiconductor (CMOS) incompatibility. New emerging two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and their hybrid systems thereof, however, can circumvent all these issues benefitting from mechanically flexibility, extraordinary electronic and optical properties, as well as wafer-scale production and integration. Heterojunction-based photodiodes based on 2D materials offer ultrafast and broadband response from the visible to far-infrared range. Phototransistors based on 2D hybrid systems combined with other material platforms such as quantum dots, perovskites, organic materials, or plasmonic nanostructures yield ultrasensitive and broadband light-detection capabilities. Notably the facile integration of 2D photodetectors on silicon photonics or CMOS platforms paves the way toward high-performance, low-cost, broadband sensing and imaging modalities.

Efficient Self-Driven Photodetectors Featuring a Mixed-Dimensional van der Waals Heterojunction Formed from a CdS Nanowire and a MoTe2 Flake

Heterojunctions formed from low-dimensional materials can result in photovoltaic and photodetection devices displaying exceptional physical properties and excellent performance. Herein, a mixed-dimensional van der Waals (vdW) heterojunction comprising a 1D n-type Ga-doped CdS nanowire and a 2D p-type MoTe₂ flake is demonstrated; the corresponding photovoltaic device exhibits an outstanding conversion efficiency of 15.01% under illumination with white light at 650 µW cm^-2 . A potential difference of 80 meV measured, using Kelvin probe force microscopy, at the CdS-MoTe₂ interface confirms the separation and accumulation of photoexcited carriers upon illumination. Moreover, the photodetection characteristics of the vdW heterojunction device at zero bias reveal a rapid response time (<50 ms) and a photoresponsivity that are linearly proportional to the power density of the light. Interestingly, the response of the vdW heterojunction device is negligible when illuminated at 580 nm; this exceptional behavior is presumably due to the rapid rate of recombination of the photoexcited carriers of MoTe₂ . Such mixed-dimensional vdW heterojunctions appear to be novel design elements for efficient photovoltaic and self-driven photodetection devices.

Heterostructure WSe2-Ga2O3 Junction Field-Effect Transistor for Low-Dimensional High-Power Electronics

Layered materials separated from each bulk crystal can be assembled to form a strain-free heterostructure by using the van der Waals interaction. We demonstrated a heterostructure n-channel depletion-mode β-Ga₂O₃ junction field-effect transistor (JFET) through van der Waals bonding with an exfoliated p-WSe₂ flake. Typical diode characteristics with a high rectifying ratio of ∼10⁵ were observed in a p-WSe₂/n-Ga₂O₃ heterostructure diode, where WSe₂ and β-Ga₂O₃ were obtained by mechanically exfoliating each crystal. Layered JFETs exhibited an excellent I_DS- V_DS output as well as I_DS- V_GS transfer characteristics with a high on/off ratio (∼10⁸) and low subthreshold swing (133 mV/dec). Saturated output currents were observed with a threshold voltage of -5.1 V and a three-terminal breakdown voltage of +144 V. Electrical performances of the fabricated heterostructure JFET were maintained at elevated temperatures with outstanding air stability. Our WSe₂-Ga₂O₃ heterostructure JFET paves the way to the low-dimensional high-power devices, enabling miniaturization of the integrated power electronic systems.