Self-Assembly of Chiral Plasmonic Nanostructures

Recent advances in gold Janus nanomaterials: Preparation and application

Gold Janus nanomaterials have a tremendous significance for the novel bifunctional materials, significantly expanding the application scope of gold nanomaterials, especially Janus gold-thiol coordination polymer due to their exceptional biological characteristics, stability, plasmon effect, etc. The recent research on Janus gold nanoparticles and monolayer films of preparation and application has been summarized and in this review. To begin, we briefly introduce overview of Janus nanomaterials which received intense attention, outline current research trends, and detail the preparation and application of gold nanomaterials. Subsequently, we present comprehensively detailing fabrication strategies and applications of Janus gold nanoparticles. Additionally, we survey recent studies on the Janus gold nano-thickness films and point out the outstanding advantage of application on the tunable surface plasmon resonance, high sensitivity of surface-enhanced Raman scattering and electrical analysis fields. Finally, we discuss the emerging trends in Janus gold nanomaterials and address the associated challenges, thereby providing a comprehensive overview of this area of research.

Self-Matching Assembly of Chiral Gold Nanoparticles Leads to High Optical Asymmetry and Sensitive Detection of Adenosine Triphosphate

To achieve chiral amplification, life uses small chiral molecules as building blocks to construct hierarchical chiral architectures that can realize advanced physiological functions. Inspired by the chiral amplification strategy of nature, we herein demonstrate that the chiral assembly of chiral gold nanorods (GNRs) leads to enhanced optical asymmetry factors (g-factors), up to 0.24. The assembly of chiral GNRs, dictated by structural self-matching, leads to g-factors with over 100-fold higher values than those of individual chiral GNRs, as confirmed by numerical simulations. Moreover, the efficient optical asymmetry of chiral GNR assemblies enables their application as highly sensitive sensors of adenosine triphosphate (ATP detection limit of 1.0 μM), with selectivity against adenosine diphosphate and adenosine monophosphate.

Innovative Synthesis of Au Nanoparticle-Trapped Flexible Macrocrystals: Achieving Stable Black Crystal Wires with Broadband Absorption

In optical materials, the development of absorbers for a wide spectrum is a focal point of research. A pivotal challenge lies in ensuring the stability and durability of optical absorbers, particularly at elevated temperatures. This study introduces a novel approach to creating absorbers with diverse colors, focusing on the synthesis and properties of black crystal wires. In contrast to black gold nanoparticle (Au NP) precipitates, which change color within hours under similar conditions, the method involves strategically trapping Au NPs within defects during the growth of single crystals. This results in black crystal wires that not only exhibit broadband absorption but also maintain exceptional stability even under prolonged exposure to high temperatures. The method also involves the controlled synthesis of colorless and red crystal wires. As a proof of concept, these stable black Au crystal wires demonstrate superior performance in photothermal conversion applications. The methodology, derived from the crystal growth process, presents a defect template that offers a novel approach to material design. Furthermore, these unique crystals, available in various colors, hold significant promise for a range of unexplored applications.

Self-Assembled Chiral Film Based on Melanin Polymers

Chirality plays a fundamental role in natural phenomena, yet its manifestation on solid surfaces remains relatively unexplored. In this study, we investigate the formation of chiroptical melanin-based self-assembled films on quartz substrates, leveraging mussel-inspired surface chemistry. Water-soluble porphyrins serve as molecular synthons, facilitating the spontaneous formation of hetero-aggregates in phosphate-buffered saline containing L- or D-DOPA. Spectroscopic analysis reveals chiral transfer from DOPA enantiomers to porphyrin hetero-aggregates, followed by the disruption of these latter and subsequent generation of chiral melanin structures in solution. Quartz substrates inserted into these solutions spontaneously accumulate homogeneous melanin-like films over days, demonstrating the feasibility of self-assembly. The resulting films exhibit characteristic UV/Vis and CD spectra, with distinct signals indicating successful chiral induction. Interestingly, the AFM characterizations reveal a distinct surface morphology, and in addition, some thermal and mechanical properties have been taken into account. Overall, this study sheds light on the formation, stability, and chiroptical properties of melanin-based films, paving the way for their application in various fields.

Dynamic Gold Nanostructures Based on DNA Self Assembly

The combination of DNA nanotechnology and Nano Gold (NG) plasmon has opened exciting possibilities for a new generation of functional plasmonic systems that exhibit tailored optical properties and find utility in various applications. In this review, the booming development of dynamic gold nanostructures are summarized, which are formed by DNA self-assembly using DNA-modified NG, DNA frameworks, and various driving forces. The utilization of bottom-up strategies enables precise control over the assembly of reversible and dynamic aggregations, nano-switcher structures, and robotic nanomachines capable of undergoing on-demand, reversible structural changes that profoundly impact their properties. Benefiting from the vast design possibilities, complete addressability, and sub-10 nm resolution, DNA duplexes, tiles, single-stranded tiles and origami structures serve as excellent platforms for constructing diverse 3D reconfigurable plasmonic nanostructures with tailored optical properties. Leveraging the responsive nature of DNA interactions, the fabrication of dynamic assemblies of NG becomes readily achievable, and environmental stimulation can be harnessed as a driving force for the nanomotors. It is envisioned that intelligent DNA-assembled NG nanodevices will assume increasingly important roles in the realms of biological, biomedical, and nanomechanical studies, opening a new avenue toward exploration and innovation.

Chiral plasmonic metasurface assembled by DNA origami

Chiral materials are essential to perceive photonic devices that control the helicity of light. However, the chirality of natural materials is rather weak, and relatively thick films are needed for noticeable effects. To overcome this limitation, artificial photonic materials were suggested to affect the chiral response in a much more substantial manner. Ideally, a single layer of such a material, a metasurface, should already be sufficient. While various structures fabricated with top-down nanofabrication technologies have already been reported, here we propose to utilize scaffolded DNA origami technology, a scalable bottom-up approach for metamolecule production, to fabricate a chiral metasurface. We introduce a chiral plasmonic metamolecule in the shape of a tripod and simulate its optical properties. By fixing the metamolecule to a rectangular planar origami, the tripods can be assembled into a 2D DNA origami crystal that forms a chiral metasurface. We simulate the optical properties but also fabricate selected devices to assess the experimental feasibility of the suggested approach critically.

New Nanophotonics Approaches for Enhancing the Efficiency and Stability of Perovskite Solar Cells

Over the past decade, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has experienced a remarkable ascent, soaring from 3.8% in 2009 to a remarkable record of 26.1% in 2023. Many recent approaches for improving PSC performance employ nanophotonic technologies, from light harvesting and thermal management to the manipulation of charge carrier dynamics. Plasmonic nanoparticles and arrayed dielectric nanostructures have been applied to tailor the light absorption, scattering, and conversion, as well as the heat dissipation within PSCs to improve their PCE and operational stability. In this review, it is begin with a concise introduction to define the realm of nanophotonics by focusing on the nanoscale interactions between light and surface plasmons or dielectric photonic structures. Prevailing strategies that utilize resonance-enhanced light-matter interactions for boosting the PCE and stability of PSCs from light trapping, carrier transportation, and thermal management perspectives are then elaborated, and the resultant practical applications, such as semitransparent photovoltaics, colored PSCs, and smart perovskite windows are discussed. Finally, the state-of-the-art nanophotonic paradigms in PSCs are reviewed, and the benefits of these approaches in improving the aesthetic effects and energy-saving character of PSC-integrated buildings are highlighted.

Polydopamine-based plasmonic nanocomposites: rational designs and applications

Taking advantage of its adhesive nature and chemical reactivity, polydopamine (PDA) has recently been integrated with plasmonic nanoparticles to yield unprecedented hybrid nanostructures. With advanced architectures and optical properties, PDA-based plasmonic nanocomposites have showcased their potential in a wide spectrum of plasmon-driven applications, ranging from catalysis and chemical sensing, to drug delivery and photothermal therapy. The rational design of PDA-based plasmonic nanocomposites entails different material features of PDA and necessitates a thorough understanding of the sophisticated PDA chemistry; yet, there is still a lack of a systematic review on their fabrication strategies, plasmonic properties, and applications. In this Highlight review, five representative types of PDA-based plasmonic nanocomposites will be featured. Specifically, their design principles, synthetic strategies, and optical behaviors will be elucidated with an emphasis on the irreplaceable roles of PDA in the synthetic mechanisms. Together, their essential functions in diverse applications will be outlined. Lastly, existing challenges and outlooks on the rational design and assembly of next-generation PDA-based plasmonic nanocomposites will be presented. This Highlight review aims to provide synthetic insights and hints to inspire and aid researchers to innovate PDA-based plasmonic nanocomposites.

Magnetic assembly of plasmonic chiral superstructures with dynamic chiroptical responses

Plasmonic nanostructures exhibiting dynamically tunable chiroptical responses hold great promise for broad applications such as sensing, catalysis, and enantioselective analysis. Despite the successful fabrication of chiral structures through diverse templates, creating dynamic chiroptical materials with fast and reversible responses to external stimuli is still challenging. This work showcases reversible magnetic assembly and active tuning of plasmonic chiral superstructures by introducing a chiral magnetic field from a cubic permanent magnet. Manipulating the strength and direction of the magnetic field controls both the chiral arrangement and plasmonic coupling of the nanoparticle assembly, enabling fast and reversible tunability in not only the handedness of the superstructures but also the spectral characteristics of their chiroptical properties. The dynamic tunability further enables the fabrication of color-changing optical devices based on the optical rotatory dispersion effect, showcasing their potential for application in anti-counterfeiting and stress sensors.

Recent Advances in the 3D Chiral Plasmonic Nanomaterials

From the view of geometry, chirality is that an object cannot overlap with its mirror image, which has been a fundamental scientific problem in biology and chemistry since the 19th century. Chiral inorganic nanomaterials serve as ideal templates for investigating chiral transfer and amplification mechanisms between molecule and bulk materials, garnering widespread attentions. The chiroptical property of chiral plasmonic nanomaterials is enhanced through localized surface plasmon resonance effects, which exhibits distinctive circular dichroism (CD) response across a wide wavelength range. Recently, 3D chiral plasmonic nanomaterials are becoming a focal research point due to their unique characteristics and planar-independence. This review provides an overview of recent progresses in 3D chiral plasmonic nanomaterials studies. It begins by discussing the mechanisms of plasmonic enhancement of molecular CD response, following by a detailed presentation of novel classifications of 3D chiral plasmonic nanomaterials. Finally, the applications of 3D chiral nanomaterials such as biology, sensing, chiral catalysis, photology, and other fields have been discussed and prospected. It is hoped that this review will contribute to the flourishing development of 3D chiral nanomaterials.

Nanophotonic Enhanced Chiral Sensing and Its Biomedical Applications

Chiral sensing is crucial in the fields of biology and the pharmaceutical industry. Many naturally occurring biomolecules, i.e., amino acids, sugars, and nucleotides, are inherently chiral. Their enantiomers are strongly associated with the pharmacological effects of chiral drugs. Owing to the extremely weak chiral light-matter interactions, chiral sensing at an optical frequency is challenging, especially when trace amounts of molecules are involved. The nanophotonic platform allows for a stronger interaction between the chiral molecules and light to enhance chiral sensing. Here, we review the recent progress in nanophotonic-enhanced chiral sensing, with a focus on the superchiral near-field and enhanced circular dichroism (CD) spectroscopy generated in both the dielectric and in plasmonic structures. In addition, the recent applications of chiral sensing in biomedical fields are discussed, including the detection and treatment of difficult diseases, i.e., Alzheimer's disease, diabetes, and cancer.

Chiral Plasmonic Hybrid Nanostructures: A Gateway to Advanced Chiroptical Materials

Chirality introduces a new dimension of functionality to materials, unlocking new possibilities across various fields. When integrated with plasmonic hybrid nanostructures, this attribute synergizes with plasmonic and other functionalities, resulting in unprecedented chiroptical materials that push the boundaries of the system's capabilities. Recent advancements have illuminated the remarkable chiral light-matter interactions within chiral plasmonic hybrid nanomaterials, allowing for the harnessing of their tunable optical activity and hybrid components. These advancements have led to applications in areas such as chiral sensing, catalysis, and spin optics. Despite these promising developments, there remains a need for a comprehensive synthesis of the current state-of-the-art knowledge, as well as a thorough understanding of the construction techniques and practical applications in this field. This review begins with an exploration of the origins of plasmonic chirality and an overview of the latest advancements in the synthesis of chiral plasmonic hybrid nanostructures. Furthermore, representative emerging categories of hybrid nanomaterials are classified and summarized, elucidating their versatile applications. Finally, the review engages with the fundamental challenges associated with chiral plasmonic hybrid nanostructures and offer insights into the future prospects of this advanced field.

Chiral Gold Nanorods with Five-Fold Rotational Symmetry and Orientation-Dependent Chiroptical Properties of Their Monomers and Dimers

Chiral plasmonic nanoparticles have attracted much attention because of their strong chiroptical responses and broad scientific applications. However, the types of chiral plasmonic nanoparticles have remained limited. Herein we report on a new type of chiral nanoparticle, chiral Au nanorod (NR) with five-fold rotational symmetry, which is synthesized using chiral molecules. Three different types of Au seeds (Au elongated nanodecahedrons, nanodecahedrons, and nanobipyramids) are used to study the growth behaviors. Different synthesis parameters, including the chiral molecules, surfactant, reductant, seeds, and Au precursor, are systematically varied to optimize the chiroptical responses of the chiral Au NRs. The chiral scattering measurements on the individual chiral Au NRs and their dimers are performed. Intriguingly, the chiroptical signals of the individual chiral Au NRs and their end-to-end dimers are similar, while those of the side-by-side dimers are largely reduced. Theoretical calculations and numerical simulations reveal that the different chiroptical responses of the chiral NR dimers are originated from the coupling effect between the plasmon resonance modes. Our study enriches chiral plasmonic nanoparticles and provides valuable insight for the design of plasmonic nanostructures with desired chiroptical properties.

Chiral Mesostructured Inorganic Materials with Optical Chiral Response

Fabricating chiral inorganic materials and revealing their unique quantum confinement-determined optical chiral responses are crucial tasks in the multidisciplinary fields of chemistry, physics, and biology. The field of chiral mesostructured inorganic materials started from the synthesis of individual nanocrystals and evolved to include their assembly from metals, semiconductors, ceramics, and inorganic salts endowed with various chiral structures ranging from atomic to micron scales. This tutorial review highlights the recent research on chiral mesostructured inorganic materials, especially the novel expression of mesostructured chirality and endowed optical chiral response, and it may inspire us with new strategies for the design of chiral inorganic materials and new opportunities beyond the traditional applications of chirality. Fabrication methods for chiral mesostructured inorganic materials are classified according to chirality type, scale, and symmetry-breaking mechanism. Special attention is given to highlight systems with original discoveries, exceptional phenomena, or unique mechanisms of optical chiral response for left- and right-handedness.

Using a molecular additive to control chiral supramolecular assembly and the subsequent chirality transfer process

Hierarchical assembly of chiral molecules is achieved through the introduction of molecular additives, which enables the chiral assembly of nanosheets into helical nanorods with inverted chirality. Moreover, the hierarchical assembly of chiral molecules in the presence of a molecular additive can lead to the subsequent chirality transfer from a molecular system to nanoparticle assemblies.

Probing Interactions between Chiral Plasmonic Nanoparticles and Biomolecules

Chiral plasmonic nanoparticles (and their assemblies) interact with biomolecules in a variety of different ways, resulting in distinct optical signatures when probed by circular dichroism spectroscopy. These systems show promise for biosensing applications and offer several advantages over achiral plasmonic systems. Arguably the most notable advantage is that chiral nanoparticles can differentiate between molecular enantiomers and can, therefore, act as sensors for enantiomeric purity. Furthermore, chiral nanoparticles can couple more effectively to chiral biomolecules in biological systems if they have a matching handedness, improving their effectiveness as biomedical agents. In this article, we review the different types of interactions that occur between chiral plasmonic nanoparticle systems and biomolecules, and discuss how circular dichroism spectroscopy can probe these interactions and inform how to optimize systems for biosensing and biomedical applications.

Nature-Inspired Chiral Structures: Fabrication Methods and Multifaceted Applications

Diverse chiral structures observed in nature find applications across various domains, including engineering, chemistry, and medicine. Particularly notable is the optical activity inherent in chiral structures, which has emerged prominently in the field of optics. This phenomenon has led to a wide range of applications, encompassing optical components, catalysts, sensors, and therapeutic interventions. This review summarizes the imitations and applications of naturally occurring chiral structures. Methods for replicating chiral architectures found in nature have evolved with specific research goals. This review primarily focuses on a top-down approach and provides a summary of recent research advancements. In the latter part of this review, we will engage in discussions regarding the diverse array of applications resulting from imitating chiral structures, from the optical activity in photonic crystals to applications spanning light-emitting devices. Furthermore, we will delve into the applications of biorecognition and therapeutic methodologies, comprehensively examining and deliberating upon the multifaceted utility of chiral structures.

Dual-Responsive Fe3O4@Polyaniline Chiral Superstructures for Information Encryption

Incorporating stimuli-responsive mechanisms into chiral assemblies of nanostructures offers numerous opportunities to create optical materials capable of dynamically modulating their chiroptical properties. In this study, we demonstrate the formation of chiral superstructures by assembling Fe3O4@polyaniline hybrid nanorods by using a gradient magnetic field. The resulting superstructures exhibit a dual response to changes in both the magnetic field and solution pH, enabling dynamic regulation of the position, intensity, and sign of its circular dichroism peaks. Such responsiveness allows for convenient control over the optical rotatory dispersion properties of the assemblies, which are further integrated into the design of a chiroptical switch that can display various colors and patterns when illuminated with light of different wavelengths and polarization states. Finally, an optical information encryption system is constructed through the controlled assembly of the hybrid nanorods to showcase the potential opportunities for practical applications brought by the resulting responsive chiral superstructures.

Co-assembly of stearoylated cellulose nanocrystals and GO (or CNTs) for the construction of superhydrophobic hierarchical structure with enhanced photothermal conversion

The development of photothermal materials with high photothermal-conversion efficiencies is important in a range of applications, such as power generation, sterilization, desalination, and energy-production. To date, a few reports have been published related to improving the photothermal conversion performances of photothermal materials based on self-assembled nanolamellae. Herein, hybrid films of co-assembled stearoylated cellulose nanocrystals (SCNCs) and polymer-grafted graphene oxide (pGO)/polymer-grafted carbon nanotubes (pCNTs) were prepared. The chemical compositions, microstructures, and morphologies of these products were characterized, and it was found that the self-assembled SCNC structures exhibited numerous surface nanolamellae due to crystallization of the long alkyl chains. The hybrid films (i.e., SCNC/pGO and SCNC/pCNTs films) consisted of ordered nanoflake structures, confirming the co-assembly behavior of the SCNCs with pGO or pCNTs. The melting temperature (~65 °C) and latent heat of melting (87.87 J/g) of SCNC_1.07 indicate its potential to induce the formation of nanolamellar pGO or pCNTs. Under light irradiation (50-200 mW/cm²), the pCNTs exhibited a higher light absorption capacity than pGO, and as a result, the SCNC/pCNTs film exhibited the best photothermal performance and electrical conversion, ultimately demonstrating its potential for use as a solar thermal device in practical applications.

Geometric Control and Optical Properties of Intrinsically Chiral Plasmonic Nanomaterials

Intrinsically chiral plasmonic nanomaterials exhibit intriguing geometry-dependent chiroptical properties, which is due to the combination of plasmonic features with geometric chirality. Thus, chiral plasmonic nanomaterials have become promising candidates for applications in biosensing, asymmetric catalysis, biomedicine, photonics, etc. Recent advances in geometric control and optical tuning of intrinsically chiral plasmonic nanomaterials have further opened up a unique opportunity for their widespread applications in many emerging technological areas. Here, the recent developments in the geometric control of chiral plasmonic nanomaterials are reviewed with special attention given to the quantitative understanding of the chiroptical structure-property relationship. Several important optical spectroscopic tools for characterizing the optical chirality of plasmonic nanomaterials at both ensemble and single-particle levels are also discussed. Three emerging applications of chiral plasmonic nanomaterials, including enantioselective sensing, enantioselective catalysis, and biomedicine, are further highlighted. It is envisioned that these advanced studies in chiral plasmonic nanomaterials will pave the way toward the rational design of chiral nanomaterials with desired optical properties for diverse emerging technological applications.

A magnetic assembly approach to chiral superstructures

Colloidal assembly into chiral superstructures is usually accomplished with templating or lithographic patterning methods that are only applicable to materials with specific compositions and morphologies over narrow size ranges. Here, chiral superstructures can be rapidly formed by magnetically assembling materials of any chemical compositions at all scales, from molecules to nano- and microstructures. We show that a quadrupole field chirality is generated by permanent magnets caused by consistent field rotation in space. Applying the chiral field to magnetic nanoparticles produces long-range chiral superstructures controlled by field strength at the samples and orientation of the magnets. Transferring the chirality to any achiral molecules is enabled by incorporating guest molecules such as metals, polymers, oxides, semiconductors, dyes, and fluorophores into the magnetic nanostructures.

Synthesis and Characterization of Gold Chiral Nanoparticles Functionalized by a Chiral Drug

Inorganic chiral nanoparticles are attracting more and more attention due to their peculiar optical properties and potential biological applications, such as bioimaging, therapeutics, and diagnostics. Among inorganic chiral nanoparticles, gold chiral nanostructures were demonstrated to be very interesting in this context, with good physical chemical stability and also the possibility to decorate the surface, improving biomedical application as the interaction with the bio-systems. Gold (Au) nanostructures were synthesized according to a seed-mediated procedure which envisages the use of cetyltrimethylammonium bromide (CTAB) as the capping agent and L- and D-cysteine to promote chirality. Au nanostructures have been demonstrated to have opposite circular dichroism signals depending on the amino acid enantiomer used during the synthesis. Then, a procedure to decorate the Au surface with penicillamine, a drug used for the treatment of Wilson's disease, was developed. The composite material of gold nanoparticles/penicillamine was characterized using electron microscopy, and the penicillamine functionalization was monitored by means of UV-Visible, Raman, and infrared spectroscopy, highlighting the formation of the Au-S bond. Furthermore, electron circular dichroism was used to monitor the chirality of the synthesized nanostructures and it was demonstrated that both penicillamine enantiomers can be successfully bonded with both the enantiomers of the gold nanostructures without affecting gold nanoparticles' chirality. The effective modification of nanostructures' surfaces via penicillamine introduction allowed us to address the important issue of controlling chirality and surface properties in the chiral nano-system.

Chiral Au Nanorods: Synthesis, Chirality Origin, and Applications

Chiral Au nanorods (c-Au NRs) with diverse architectures constitute an interesting nanospecies in the field of chiral nanophotonics. The numerous possible plasmonic behaviors of Au NRs can be coupled with chirality to initiate, tune, and amplify their chiroptical response. Interdisciplinary technologies have boosted the development of fabrication and applications of c-Au NRs. Herein, we have focused on the role of chirality in c-Au NRs which helps to manipulate the light-matter interaction in nontraditional ways. A broad overview on the chirality origin, chirality transfer, chiroptical activities, artificially synthetic methodologies, and circularly polarized applications of c-Au NRs will be summarized and discussed. A deeper understanding of light-matter interaction in c-Au NRs will help to manipulate the chirality at the nanoscale, reveal the natural evolution process taking place, and set up a series of circularly polarized applications.

Poly(thioctic acid): From Bottom-Up Self-Assembly to 3D-Fused Deposition Modeling Printing

Inspired by the bottom-up assembly in nature, an artificial self-assembly pattern is introduced into 3D-fused deposition modeling (FDM) printing to achieve additive manufacturing on the macroscopic scale. Thermally activated polymerization of thioctic acid (TA) enabled the bulk construction of poly(TA), and yielded unique time-dependent self-assembly. Freshly prepared poly(TA) can spontaneously and continuously transfer into higher-molecular-weight species and low-molecular-weight TA monomers. Poly(TA) and the newly formed TA further assembled into self-reinforcing materials via microscopic-phase separation. Bottom-up self-assembly patterns on different scales are fully realized by 3D FDM printing of poly(TA): thermally induced polymerization of TA (microscopic-scale assembly) to poly(TA) and 3D printing (macroscopic-scale assembly) of poly(TA) are simultaneously achieved in the 3D-printing process; after 3D printing, the poly(TA) modes show mechanically enhanced features over time, arising from the microscopic self-assembly of poly(TA) and TA. This study clearly demonstrates that micro- and macroscopic bottom-up self-assembly can be applied in 3D additive manufacturing.

Gold nanoparticle ring arrays from core-satellite nanostructures made to order by hydrogen bond interactions

Polyethylene glycol-grafted gold nanoparticles are attached to silica nanoparticle cores via hydrogen bonding in a controlled fashion, forming well-defined core-satellite structures in colloidal solution. For separating these complex structures effectively from the parental nanoparticles, a straightforward and easy protocol using glass beads has been developed. The attached gold nanoparticles show unique surface mobility on the silica core surface, which allows for nanoparticle rearrangement into a 2D ring pattern surrounding the silica nanoparticle template when the core-satellite structures are cast to a planar surface. When etching away the silica core under conditions in which the polymer shell fixes the satellites to the substrate, highly ordered ring-shaped patterns of gold nanoparticles are formed. By variation of the size of the parental particles - 13 to 28 nm for gold nanoparticles and 39 to 62 nm for silica nanoparticles - a great library of different ring-structures regarding size and particle number is accessible with relative ease. The proposed protocol is low-cost and can easily be scaled up. It moreover demonstrates the power of hydrogen bonds in polymers as a dynamic anchoring tool for creating nanoclusters with rearrangement ability. We believe that this concept constitutes a powerful strategy for the development of new and innovative nanostructures.

Anisotropic cellulose nanocrystal hydrogel with multi-stimuli response to temperature and mechanical stress

Conventional hydrogels with isotropic polymer networks usually lack selective response to external stimuli and that limits their applications in intelligent devices. Herein, hydrogels with distinctive anisotropic optical characteristics combined with thermosensitivity were prepared through in situ photopolymerization. Self-assembled cellulose nanocrystals (CNCs) with chiral nematic ordered structure were embedded in polyethylene glycol derivatives/polyacrylamide polymer networks. The arrangement of CNCs showed a strong dependence on the self-assembly angle and standing time, enabling the fabrication of hydrogels with customizable CNCs arrangements. Increasing the self-assembly angle from 0° to 90° changed the CNCs arrangement from chiral nematic to symmetrical nematic order which, together with CNCs dynamic arrangement from isotropic to annealed chiral nematic phase at longer standing time, provided versatile ways to produce CNCs hydrogels with tunable anisotropic properties. In addition, the obtained hydrogel displayed reversible temperature and compression response, showing excellent promise to be used as soft mechanical stress and temperature sensors or novel anti-counterfeiting materials.

Plasmonic nanobar-on-mirror antenna with giant local chirality: a new platform for ultrafast chiral single-photon emission

Providing an additional degree of freedom for binary information encoding and nonreciprocal information transmission, chiral single photons have become a new research frontier in quantum optics. Without using complex external conditions (e.g., magnetic field, low temperature), coupling emitters to chiral optical antennas has become a promising strategy to efficiently convert single photons from linear to circular polarization states. For ideal chiral single-photon sources, essential properties such as giant Purcell factor, large degree of circular polarization (DCP), and high collection efficiency are highly demanded. Herein, to meet these combined requirements, we propose an emitter-coupled nanobar-on-mirror antenna platform with significant local chirality acquired from the broken symmetry, as well as the giant Purcell factor owing to its ultrasmall mode volume. An emitter embedded at the corner in the gap exhibits above 3 orders of magnitude enhancement of the chiral spontaneous emission with more than 80% collection efficiency, along with up to 70% DCP. Compatible with a myriad of nanoscale quantum emitters (e.g. transition metal dichalcogenides, color centers, quantum dots, etc.), this platform, not only manifests the potential for realizing ultrafast chiral single-photon generator towards GHz and THz operation speed but also provides versatile testbeds for investigating chiral light-matter interaction at the single-quantum level.

Template-assisted self-assembly of achiral plasmonic nanoparticles into chiral structures

The acquisition of strong chiroptical activity has revolutionized the field of plasmonics, granting access to novel light-matter interactions and revitalizing research on both the synthesis and application of nanostructures. Among the different mechanisms for the origin of chiroptical properties in colloidal plasmonic systems, the self-assembly of achiral nanoparticles into optically active materials offers a versatile route to control the structure-optical activity relationships of nanostructures, while simplifying the engineering of their chiral geometries. Such unconventional materials include helical structures with a precisely defined morphology, as well as large scale, deformable substrates that can leverage the potential of periodic patterns. Some promising templates with helical structural motifs like liquid crystal phases or confined block co-polymers still need efficient strategies to direct preferential handedness, whereas other templates such as silica nanohelices can be grown in an enantiomeric form. Both types of chiral structures are reviewed herein as platforms for chiral sensing: patterned substrates can readily incorporate analytes, while helical assemblies can form around structures of interest, like amyloid protein aggregates. Looking ahead, current knowledge and precedents point toward the incorporation of semiconductor emitters into plasmonic systems with chiral effects, which can lead to plasmonic-excitonic effects and the generation of circularly polarized photoluminescence.

Hysteresis Nanoarchitectonics with Chiral Gel Fibers and Achiral Gold Nanospheres for Reversible Chiral Inversion

Intelligent control over the handedness of circular dichroism (CD) is of special significance in self-organized biological and artificial systems. Herein, we report a chiral organic molecule (R1) containing a disulfide unit self-assembles into M-type helical fibers gels, which undergoes chirality inversion by incorporating gold nanospheres due to the formation of Au-S bonds between R1 and gold nanospheres. Upon heating at 80oC, the aggregation of gold nanospheres results in a disappearance of the Au-S bond, allowing the reversible switching back to M-type helical fibers. The original chirality of M-type fibers could also be retained by adding anisotropic gold nanorods. A series of characterization methods, involving CD, Raman, Infrared spectroscopy, electric microscopy, and small-angle X-ray scattering (SAXS) measurements were used to investigate the mechanism of chiral evolutions. Our results provide a facile way of fabricating hysteresis nanoarchitectonics to achieve dynamic supramolecular chirality using inorganic metallic nanoparticles.

Sub-1.5 nm-gapped heterodimeric plasmonic nanomolecules

A whole set of plasmonic nanodimers with prescribed binary compositions are constructed in solution to enable symmetry-broken strong plasmonic coupling.

Local Growth Mediated by Plasmonic Hot Carriers: Chirality from Achiral Nanocrystals Using Circularly Polarized Light

Plasmonic nanocrystals and their assemblies are excellent tools to create functional systems, including systems with strong chiral optical responses. Here we study the possibility of growing chiral plasmonic nanocrystals from strictly nonchiral seeds of different types by using circularly polarized light as the chirality-inducing mechanism. We present a novel theoretical methodology that simulates realistic nonlinear and inhomogeneous photogrowth processes in plasmonic nanocrystals, mediated by the excitation of hot carriers that can drive surface chemistry. We show the strongly anisotropic and chiral growth of oriented nanocrystals with lowered symmetry, with the striking feature that such chiral growth can appear even for nanocrystals with subwavelength sizes. Furthermore, we show that the chiral growth of nanocrystals in solution is fundamentally challenging. This work explores new ways of growing monolithic chiral plasmonic nanostructures and can be useful for the development of plasmonic photocatalysis and fabrication technologies.

Effect of Ionic Strength, Nanoparticle Surface Charge Density, and Template Diameter on Self-Limiting Single-Particle Placement: A Numerical Study

For the bottom-up approach where functional materials are constructed out of nanoscale building blocks (e.g., nanoparticles), it is essential to have methods that are capable of placing the individual nanoscale building blocks onto exact substrate positions on a large scale and on a large area. One of the promising placement methods is the self-limiting single-particle placement (SPP), in which a single nanoparticle in a colloidal solution is electrostatically guided by electrostatic templates and exactly one single nanoparticle is placed on each target position in a self-limiting way. This paper presents a numerical study on SPP, where the effects of three key parameters, (1) ionic strength (IS), (2) nanoparticle surface charge density (σ_NP), and (3) circular template diameter (d), on SPP are investigated. For 40 different parameter sets of (IS, σ_NP, d), a 30 nm nanoparticle positioned at R⃗ above the substrate was modeled in two configurations (i) without and (ii) with the presence of a 30 nm nanoparticle at the center of a circular template. For each parameter set and each configuration, the electrostatic potentials were calculated by numerically solving the Poisson-Boltzmann equation, from which interaction forces and interaction free energies were subsequently calculated. These have identified realms of parameter sets that enable a successful SPP. A few exemplary parameter sets include (IS, σ_NP, d) = (0.5 mM, -1.5 μC/cm², 100 nm), (0.05 mM, -0.5 μC/cm², 100 nm), (0.5 mM, -1.5 μC/cm², 150 nm), and (0.05 mM, -0.8 μC/cm², 150 nm). This study provides clear guidance toward experimental realizations of large-scale and large-area SPPs, which could lead to bottom-up fabrications of novel electronic, photonic, plasmonic, and spintronic devices and sensors.

Engineering Efficient Self-Assembled Plasmonic Nanostructures by Configuring Metallic Nanoparticle's Morphology

We reveal the significance of plasmonic nanoparticle's (NP) shape and its surface morphology en route to an efficient self-assembled plasmonic nanoparticle cluster. A simplified model is simulated in the form of free-space dimer and trimer nanostructures (NPs in the shape of a sphere, cube, and disk). A ~200% to ~125% rise in near-field strength (gap mode enhancement) is observed for spherical NPs in comparison with cubical NPs (from 2 nm to 8 nm gap sizes). Full-width three-quarter maximum reveals better broad-spectral optical performance in a range of ~100 nm (dimer) and ~170 nm (trimer) from spherical NPs as compared to a cube (~60 nm for dimer and trimer). These excellent properties for sphere-based nanostructures are merited from its dipole mode characteristics.

Asymmetric Incorporation of Silver Nanoparticles in Polymeric Assemblies by Coassembly of Tadpole-Like Nanoparticles and Amphiphilic Block Copolymers

A general approach to asymmetrically localize nanoparticles (NPs) in larger polymeric nanostructures is demonstrated by coassembly of tadpole-like silver NPs (AgNPs) and amphiphilic block copolymers (BCPs). The tadpole-like AgNPs are prepared by template synthesis using a tailor-made A(BC)₂₀ star polymer, namely poly(ethylene glycol)[poly(acrylic acid)-block-polystyrene]₂₀ [PEG(PAA-b-PS)₂₀ ], as template resulting in AgNPs decorated with twenty short PS chains and one long PEG chain, named Ag@PEG(PS)₂₀ . The asymmetric distribution of these AgNPs in various polymeric nanostructures, e.g., spherical micelles, cylindrical micelles, vesicles, and sponge phase, is achieved via coassembly of the as-prepared Ag@PEG(PS)₂₀ and PEG-b-PS in solution driven by the anisotropic nature of the Ag@PEG(PS)₂₀ . This report not only provides a new strategy for the fabrication of tadpole-like NPs but also offers opportunity for off-center distributing NPs in hybrid assemblies, which may find applications in, e.g., sensing, catalysis, and diagnostics.

Resistance-Chiral Anisotropy of Chiral Mesostructured Half-metallic Fe3 O4 Films

Half-metallic materials are theoretically predicted to be metallic and insulating, which have not been confirmed experimentally, and the predictions are still in doubt. We report the resistance-chiral anisotropy (R-ChA), i.e., chirality-dependent electrical conductivity, in chiral mesostructured Fe₃ O₄ films (CMFFs) grown on the substrates via a hydrothermal method using amino acids as symmetry-breaking agents. Two levels of chirality exist in the CMFFs: primary distortion of the crystal lattice forms twisted nanoflakes, and secondary helical stacking of nanoflakes forms fan-shaped nanoplates. At temperatures below 30 K, the CMFFs exhibited metallic conductivity and insulation for one handedness and the other, respectively. The chirality-dependent effective magnetic fields were speculated to stabilize the opposite spin in the antipodal chiral frame, which led to the free transport of electrons in one handedness of the chiral structure and immobility for the other handedness.

Serum albumin guided plasmonic nanoassemblies with opposite chiralities

Chiral assemblies by combining natural biomolecules with plasmonic nanostructures hold great promise for plasmonic enhanced sensing, imaging, and catalytic applications. Herein, we demonstrate that human serum albumin (HSA) and porcine serum albumin (PSA) can guide the chiral assembly of gold nanorods (GNRs) with left-handed chiroptical responses opposite to those by a series of other homologous animal serum albumins (SAs) due to the difference of their surface charge distributions. Under physiological pH conditions, the assembly of HSA or PSA with GNRs yielded left-handed twisted aggregates, while bovine serum albumin (BSA), sheep serum albumin, and equine serum albumin behaved on the contrary. The driving force for the chiral assembly is mainly attributed to electrostatic interaction. The opposite chiroptical signals acquired are correlated with the chiral surface charge distributions of the tertiary structures of SAs. Moreover, the chirality of the assembly induced by both HSA and BSA can be enhanced or reversed by adjusting the pH values. This work provides new insights into the modulation of protein-induced chiral assemblies and promotes their applications.

STEM Tomography of Au Helical Assemblies

Composite, helical nanostructures formed using cooperative interactions of liquid crystals and Au nanoparticles were studied using a scanning transmission electron microscopy (STEM) mode. The investigated helical assemblies exhibit long-range hierarchical order across length scales, as a result of the crystallization (freezing) directed growth mechanism of nanoparticle-coated twisted nanoribbons and their ability to form organized bundles. Here, STEM methods were used to reproduce the 3D structure of the Au nanoparticle double helix.

Constructing chiral gold nanorod oligomers using a spatially separated sergeants-and-soldiers effect

A sergeants-and-soldiers (S&S) effect is very useful to the fabrication of supramolecular chirality. This strategy has not yet been explored in the construction of chiral plasmonic superstructures. Herein, we demonstrate a spatially separated S&S effect in fabricating plasmonic superstructures and modulating their chiroptical responses. Specifically, chiral cysteine (Cys) molecules, acting as sergeants, are sandwiched between a gold nanorod (AuNR) core and a Au shell via AuNR-templated Au overgrowth. Cationic surfactants, CTAB (cetyltrimethylammonium bromide) or CPC (cetylpyridinium chloride), are modified on the AuNR@Cys@Au shell surface, thus spatially separating from the chiral sergeants. During the assembly process, the surfactants act as soldiers which could transfer and amplify the local chirality induced by the adsorbed chiral molecules from the plasmonic monomers to the oligomers. Huge PCD signals could be achieved in the plasmonic oligomers by finely tuning chiral sergeants and achiral soldiers, indicating the feasibility of the S&S effect in fabricating chiral plasmonic superstructures.

Nonlinear Amplification of Chirality in Self-Assembled Plasmonic Nanostructures

Molecular chirality transfer and amplification is at the heart of the fundamental understanding of chiral origin and fabrication of artificial chiral materials. We investigate here the nonlinear amplification effect in the chiral transfer from small molecules to assembled plasmonic nanoparticles. Our results show clearly a recognizable nonlinear behavior of the electronic and plasmonic circular dichroism activities, demonstrating the validity of the "majority-rules" principle operating in both the three-dimensional interface-confined molecularly chiral environment and the assembled plasmonic nanoparticles. Such twin "majority-rules" effects from the self-assembled organic-inorganic nanocomposite system have not been reported previously. By establishing a direct correlation between the dynamic template of the molecularly chiral environment and the nonlinear chiral amplification in the nanoparticle assemblies, this study may provide an insightful understanding of the hierarchical and cooperative chiral information transfer from molecular levels to nanoscales.

Stimuli-Responsive Plasmonic Assemblies and Their Biomedical Applications

Among the diverse development of stimuli-responsive assemblies, plasmonic nanoparticle (NP) assemblies functionalized with responsive molecules are of a major interest. In this review, we outline a comprehensive and up-to-date overview of recently reported studies on in vitro and in vivo assembly/disassembly and biomedical applications of plasmonic NPs, wherein stimuli such as enzymes, light, pH, redox potential, temperature, metal ions, magnetic or electric field, and/or multi-stimuli were involved. Stimuli-responsive assemblies have been applied in various biomedical fields including biosensors, surfaced-enhanced Raman scattering (SERS), photoacoustic (PA) imaging, multimodal imaging, photo-activated therapy, enhanced X-ray therapy, drug release, stimuli-responsive aggregation-induced cancer therapy, and so on. The perspectives on the use of stimuli-responsive plasmonic assemblies are discussed by addressing future scientific challenges involving assembly/disassembly strategies and applications.

DNA Origami Guided Self-Assembly of Plasmonic Polymers with Robust Long-Range Plasmonic Resonance

Plasmonic polymers consisting of metallic nanoparticles (NPs) are able to squeeze light into the deep-subwavelength space and transfer along a highly confined nanoscale path in long range. DNA nanotechnology, particularly benefiting from the molecular programmability of DNA origami, has provided otherwise nearly impossible platforms for constructing plasmonic nanoparticle polymers with designer configurations and nanoscale gaps. Here, we design and assemble a DNA origami hashtag tile that is able to polymerize into one-dimensional chains with high rigidity. The DNA origami hashtag chains are used as frames to enable robust, versatile, and precise arrangement of metallic NPs into micrometer-long chiral and magnetic plasmonic polymers, which are capable of efficiently transporting plasmonic angular momentum and magnetic surface plasmonic polaritons at the deep-subwavelength scale. Our work provides a molecular platform for the fabrication of long, straight, and structurally complex nanoparticle polymers with emerging plasmonic properties that are appealing to a variety of fields.

A single bottom facet outperforms random multifacets in a nanoparticle-on-metallic-mirror system

Highly efficient nanoparticle-on-metallic-mirror (NPOM) systems with a large gap size exhibiting good plasmonic enhancement are desirable for numerous practical applications. Careful, explicit design optimization strategies are required for preparing NPOMs and it is especially important in utilizing spherical nanoparticles. In this work, a new design blueprint for evaluating the role of random facets in spherical nanoparticles was investigated in detail to realize optimal NPOMs. We found that a precise single facet positioned at the nanoparticle's cavity outperformed multiple random facets due to the gap mode contribution. Differences and changes in the plasmonic modes were interpreted with the help of three-dimensional surface charge density mappings. A high-performance, single, bottom-faceted NPOM device with a large gap size (example 20 nm) was realized having 80-50% facet design, resulting in excellent gap mode enhancement. We succeeded in fabricating single bottom-faceted NPOMs (the non-facet region had a smooth spherical surface) with a large-scale unidirectionality (2 cm × 1.5 cm). Simulations and experimental characterizations of these components displayed excellent agreement. Our highly efficient NPOM design with a large gap size(s) enables interesting practical applications in the field of quantum emitters, energy devices, fuel generation and plasmon chemistry.

Supramolecular Chirality Synchronization in Thin Films of Plasmonic Nanocomposites

Mirror symmetry breaking in materials is a fascinating phenomenon that has practical implications for various optoelectronic technologies. Chiral plasmonic materials are particularly appealing due to their strong and specific interactions with light. In this work we broaden the portfolio of available strategies toward the preparation of chiral plasmonic assemblies, by applying the principles of chirality synchronization-a phenomenon known for small molecules, which results in the formation of chiral domains from transiently chiral molecules. We report the controlled cocrystallization of 23 nm gold nanoparticles and liquid crystal molecules yielding domains made of highly ordered, helical nanofibers, preferentially twisted to the right or to the left within each domain. We confirmed that such micrometer sized domains exhibit strong, far-field circular dichroism (CD) signals, even though the bulk material is racemic. We further highlight the potential of the proposed approach to realize chiral plasmonic thin films by using a mechanical chirality discrimination method. Toward this end, we developed a rapid CD imaging technique based on the use of polarized light optical microscopy (POM), which enabled probing the CD signal with micrometer-scale resolution, despite of linear dichroism and birefringence in the sample. The developed methodology allows us to extend intrinsically local effects of chiral synchronization to the macroscopic scale, thereby broadening the available tools for chirality manipulation in chiral plasmonic systems.

Chirality and Surface Bonding Correlation in Atomically Precise Metal Nanoclusters

Chirality is ubiquitous in nature and occurs at all length scales. The development of applications for chiral nanostructures is rising rapidly. With the recent achievements of atomically precise nanochemistry, total structures of ligand-protected Au and other metal nanoclusters (NCs) are successfully obtained, and the origins of chirality are discovered to be associated with different parts of the cluster, including the surface ligands (e.g., swirl patterns), the organic-inorganic interface (e.g., helical stripes), and the kernel. Herein, a unified picture of metal-ligand surface bonding-induced chirality for the nanoclusters is proposed. The different bonding modes of M-X (where M = metal and X = the binding atom of ligand) lead to different surface structures on nanoclusters, which in turn give rise to various characteristic features of chirality. A comparison of Au-thiolate NCs with Au-phosphine ones further reveals the important roles of surface bonding. Compared to the Au-thiolate NCs, the Ag/Cu/Cd-thiolate systems exhibit different coordination modes between the metal and the thiolate. Other than thiolate and phosphine ligands, alkynyls are also briefly discussed. Several methods of obtaining chiroptically active nanoclusters are introduced, such as enantioseparation by high-performance liquid chromatography and enantioselective synthesis. Future perspectives on chiral NCs are also proposed.