Bioinspired Photonic Pigments from Colloidal Self-Assembly

A Versatile Synthesis Platform Based on Polymer Cubosomes for a Library of Highly Ordered Nanoporous Metal Oxides Particles

Polymer cubosomes (PCs) have well-defined inverse bicontinuous cubic mesophases formed by amphiphilic block copolymer bilayers. The open hydrophilic channels, large periods, and robust physical properties of PCs are advantageous to many host-guest interactions and yet not fully exploited, especially in the fields of functional nanomaterials. Here, the self-assembly of poly(ethylene oxide)-block-polystyrene block copolymers is systematically investigated and a series of robust PCs is developed via a cosolvent method. Ordered nanoporous metal oxide particles are obtained by selectively filling the hydrophilic channels of PCs via an impregnation strategy, followed by a two-step thermal treatment. Based on this versatile PC platform, the general synthesis of a library of ordered porous particles with different pore structures3 ¯ $\bar{3}$ 3 ¯ $\bar{3}$ , tunable large pore size (18-78 nm), high specific surface areas (up to 123.3 m2 g-1 for WO3) and diverse framework compositions, such as transition and non-transition metal oxides, rare earth chloride oxides, perovskite, pyrochlore, and high-entropy metal oxides is demonstrated. As typical materials obtained via this method, ordered porous WO3 particles have the advantages of open continuous structure and semiconducting properties, thus showing superior gas sensing performances toward hydrogen sulfide.

Characterizing the Microparticles Deposition Structure and its Photonic Nature in Surfactant-Laden Evaporating Colloidal Sessile Droplets

This work presents a simple method to create photonic microstructures via the natural evaporation of surfactant-laden colloidal sessile droplets on a flat substrate. In the absence of dissolved surfactant, the evaporating colloidal droplet forms a well-known coffee ring deposition. In contrast, the presence of surfactant leads to the formation of multiple ring structures due to the repetitive pinning-depinning behavior of the droplet contact line (CL). It is found that the multiring structure shows vibrant iridescent structural colors while the coffee ring lacks a photonic nature. This difference in the structural color for the presence and absence of the surfactant is found to be dependent on the arrangement of the particles in the deposition structure. The particle arrangement in the multirings is monolayered and well-ordered. The ordering of the particles is strongly influenced by the particle dynamics, contact angle (CA), and CL dynamics of the evaporating colloidal solution droplet. Furthermore, the iridescent nature of the multiring deposition is demonstrated and explained. The dependence of the multiring deposition structure on the concentration of the dissolved surfactant and the suspended particles is also studied. The findings demonstrate that an intermediate surfactant concentration is desirable for the formation of a multiring structure. Further, the pinning-depinning CL dynamics that causes the formation of the multiring deposition structure is discussed. Finally, we demonstrate the applicability of the approach to smaller droplet volumes.

Colloidal Photonic Composites with a Long-Range Order by Hot-Pressing Polymer Brush-Grafted Silica Colloids

Colloidal photonic composites (CPCs) are unique optical materials that combine flexible and responsive polymers with colloidal photonic crystals, and they have promising applications in colorful displays, optical anticounterfeiting, and visual sensors. However, conventional self-assembly strategies for constructing CPCs via solvent evaporation have faced limitations due to the meticulous regulation required during the evaporation process and typically long preparation durations. Here, we present an external force method to achieve a long-range ordered arrangement in CPCs by hot-pressing poly(2-[[(butylamino)carbonyl]oxy]ethyl acrylate (PBCOE)) brush-grafted silica colloidal particles (SiO2-g-PBCOE). We show that the hot-pressing conditions (i.e., temperature and pressure) and the silica volume fraction (φsilica) of the SiO2-g-PBCOE colloidal particles play crucial roles in determining their ordering and optical properties. By optimization of the hot-pressing temperature up to 100 °C and pressure of 5 MPa, a long-range ordered arrangement of SiO2-g-PBCOE colloidal particles with a φsilica of 20.3% can be achieved. For the effect of structural features, our findings reveal that SiO2-g-PBCOE colloidal particles featuring a higher φsilica are more prone to obtain a long-range ordered arrangement compared to a lower φsilica under hot-pressing conditions at relatively low temperature and pressure (50 °C and 5 MPa), which is mainly attributed to the chain entanglement and hydrogen bonding interactions induced by grafted longer polymer brushes, leading to additional energy inputs and weakening the ordering. Significantly, the critical φsilica (φc) of SiO2-g-PBCOE colloidal particles is discerned, strongly influencing the optical properties of the hot-pressed films. Specifically, a hot-pressed SiO2-g-PBCOE film with a critical φsilica of 29.3% displays enhanced optical properties characterized by intensified reflection peaks, narrowed full width at half-maximum (FWHM), and brilliant structural colors. Notably, in this work, we reveal the mechanism of hot-pressing-driven core-shell colloidal particle ordering and the key factors affecting the ordering of colloidal particles, i.e., chain entanglement and hydrogen-bonding interactions, which play a crucial role in obtaining CPCs with controllable structures. Moreover, angle-dependent structural color is observed in the hot-pressed SiO2-g-PBCOE film with a φsilica content of 29.3% due to the unique attributes of the highly ordered arrangement, while the films exhibit mechanochromic properties due to chain entanglement and hydrogen bonding interactions. This work provides valuable insights into the rapid construction of highly ordered CPCs and establishes a solid foundation for external force-assisted ordering of colloidal particles.

Tuning disorder in structurally colored bioinspired photonic glasses

Colloidal crystals, such as opals, display bright and iridescent colors when assembled from submicron particles. While the brightness and purity of iridescent colors are well suited for ornaments, signaling, and anticounterfeiting, their angle dependence limits the range of their applications. In contrast, colloidal glasses display angle-independent structural color that is tunable by the size and local arrangement of particles. However, the angle-independent color of colloidal photonic glasses usually yields pastel colors that are not vivid due to the disorder in the particle assembly. Here, we report an electrophoretic assembly platform for tuning the level of disorder in the particle system from a colloidal crystal to a colloidal glass. Altering the electric field in our electrophoretic platform allows for deliberate control of the assembly kinetics and thus the level of order in the particle assembly. With the help of microscopy, X-ray scattering, and optical characterization, we show that the photonic properties of the assembled films can be tuned with the applied electric field. Our analyses reveal that angle-independent color with optimum color brightness can be achieved in typical colloidal suspensions when the range of order is at ∼3.2 particle diameters, which is expected at a moderate electric field of ∼15 V mm-1.

Self-assembled, disordered structural color from fruit wax bloom

Many visually guided frugivores have eyes highly adapted for blue sensitivity, which makes it perhaps surprising that blue pigmented fruits are not more common. However, some fruits are blue even though they do not contain blue pigments. We investigate dark pigmented fruits with wax blooms, like blueberries, plums, and juniper cones, and find that a structural color mechanism is responsible for their appearance. The chromatic blue-ultraviolet reflectance arises from the interaction of the randomly arranged nonspherical scatterers with light. We reproduce the structural color in the laboratory by recrystallizing wax bloom, allowing it to self-assemble to produce the blue appearance. We demonstrate that blue fruits and structurally colored fruits are not constrained to those with blue subcuticular structure or pigment. Further, convergent optical properties appear across a wide phylogenetic range despite diverse morphologies. Epicuticular waxes are elements of the future bioengineering toolbox as sustainable and biocompatible, self-assembling, self-cleaning, and self-repairing optical biomaterials.

Versatile Deposition of Complex Colloidal Assemblies from the Evaporation of Hanging Drops

Existing strategies designed to produce ordered arrangements of colloidal particles on solid supports are of great interest for their wide range of applications, from colloidal lithography, plasmonic and biomimetic surfaces to tags for anti-counterfeiting, but they all share various degrees of complexity hampering their facile implementation. Here, a drastically simplified methodology is presented to achieve ordered particle deposition, consisting in adding micromolar amounts of cationic surfactant to a colloidal suspension drop and let it evaporate in an upside-down configuration. Confinement at the air/water interface enables particle assembly into monolayers, which are then transferred on the substrate producing highly ordered structures displaying vivid, orientation-dependent structural colors. The method is compatible with many particle types and substrates, while controlling system parameters allows tuning the deposit size and morphology, from monocrystals to polycrystalline disks and "irises", from single-component to crystal alloys with Moiré patterns, demonstrating its practicality for a variety of processes.

Waterborne Polymer Coatings with Bright Noniridescent Structural Colors

Structural color pigments offer an efficient, sustainable, and environmentally friendly approach to obtain waterborne polymer coatings. We developed polymer-based spherical photonic pigments to incorporate in aqueous dispersions of polymer nanoparticles used to obtain waterborne polymer films. Our spherical photonic pigments are assembled from polymer nanoparticles and are highly stable in water dispersion, maintaining their optical properties in the final polymer films. Unlike conventional dyes and pigments, which are prone to photobleaching because they are based on the absorption of light, photonic pigments rely on the selective reflection of light by their nanostructure and therefore are not photodegraded. Furthermore, different colors can be obtained from the same materials, changing only their nanostructure, in this case, the size of the polymer nanoparticles. Our novel spherical photonic pigments are noniridescent and can be incorporated in aqueous polymer nanoparticle dispersions without deteriorating their structure to produce waterborne polymer coatings with structural color. This approach for structural colored waterborne polymer coatings is efficient, simple, and environmentally friendly, offering excellent prospects for application in paints and coatings.

Bionic Structural Coloration of Textiles Using the Synthetically Prepared Liquid Photonic Crystals

The structural coloration of textiles with bionic photonic crystals (PCs) is expected to become a critical approach to the ecological coloration of textiles. Rapid and large-area preparation of PC structurally colored textiles can be achieved via self-assembly of high mass fractions of liquid photonic crystals (LPCs). However, the rapid and large-scale manufacturing of LPCs remains a challenge. In this work, the pH regulator is added in the process of emulsion polymerization to solve the problem of phase transformation caused by the thermal decomposition of the initiator to produce H+ , directly achieving 40 wt.% PS nanospheres in the dispersion. Then oligomers and small-molecule salts are removed from the system via dialysis, and the pre-crystallized LPC system is efficiently prepared. Adjusting the particle size and the mass fraction of nanospheres is shown to be an efficient way to control the optical properties of LPCs. The rapid and large-area preparation of PC structural color fabric and the patterned PC structural color fabric with an iridescent effect is implemented by using LPCs as the assembly intermediate. By constructing the encapsulation layer on the surface of the PC structural color fabric, the consistency of high structural stability and high color saturation of the PC is realized.

Auxetic Photonic Patterns with Ultrasensitive Mechanochromism

Photonic crystals with mechanochromic properties are currently under intensive study to provide intuitive colorimetric detection of strains for various applications. However, the sensitivity of color change to strain is intrinsically limited, as the degree of deformation determines the wavelength shift. To overcome this limitation, auxetic photonic patterns that exhibit ultra-sensitive mechanochromism are designed. These patterns have a regular arrangement of cuts that expand to accommodate the strain, while the skeletal framework undergoes torsional deformation. Elastic photonic crystals composed of a non-close-packed array of colloidal particles are embedded in the cut area of the auxetic patterns. As the cut area amplifies the strains, the elastic photonic crystals show significant color change even for small total strains. The degree of local-strain amplification, or sensitivity of color change, is controllable by adjusting the width of cuts in the auxetic framework. In this work, a maximum sensitivity of up to 60 nm/% is achieved, which is 20 times higher than bulk films. It is believed that the auxetic photonic patterns with ultra-sensitive mechanochromism will provide new opportunities for the pragmatic use of mechanochromic materials in various fields, including structural health monitoring.

3D printing of non-iridescent structural color inks for optical anti-counterfeiting

In this work, structural color inks with practical significance in anti-counterfeiting applications have been successfully manufactured by facilely mixing SiO2@PDA@PHEMA hybrid colloidal particles with the mediated molecules of HEMA. The appropriate rheological properties of these photonic inks provide high viscosity and self-supporting performance, ensuring sufficient interaction between particles to form short-range ordered arrays during the mixing and shearing process and thus generating non-iridescent colors. The strong and broad uniform light absorption capabilities of polydopamine (PDA) not only suppress the incoherent multiple scattering of the photonic inks, but also impart surprising optical anti-counterfeiting properties, i.e. black color under ambient illumination and dazzling reflective coloration under strong illumination. With the 3D printing technique, complicated angle-independent patterns with visualization and high fidelity are expected to be fabricated with the as-prepared photonic inks for real-life applications in smart anti-counterfeiting labels, thus encoding encrypted information and selective color rendering accessories.

Light-Based 3D Printing of Complex-Shaped Photonic Colloidal Glasses

Colloidal glasses display angle-independent structural color that is tunable by the size and local arrangement of sub-micrometer particles. While films, droplets, and microcapsules with isotropic structural color have been demonstrated, the shaping of colloidal glasses in three dimensions remains an open manufacturing challenge. Here, a light-based printing platform for the shaping of colloidal glasses into 3D objects featuring complex geometries and vivid structural color after thermal treatment is reported. Rheology, photopolymerization, and calcination experiments are performed to design the photoreactive resins leading to printable colloidal glasses. With the help of microscopy, scattering, and optical characterization, it is shown that the photonic properties of the printed objects reflect the locally ordered microstructure of the glass. The capability of the platform in creating 3D objects with isotropic structural color is illustrated by printing lattices and miniaturized sculpture replicas with unique shapes and multimaterial designs.

Fast Gas-Adsorption Kinetics in Supraparticle-Based MOF Packings with Hierarchical Porosity

Metal-organic frameworks (MOFs) are microporous adsorbents for high-throughput gas separation. Such materials exhibit distinct adsorption characteristics owing to the flexibility of the crystal framework in a nanoparticle, which can be different from its bulk crystal. However, for practical applications, such particles need to be compacted into macroscopic pellets, creating mass-transport limitations. In this work, this problem is addressed by forming materials with structural hierarchy, using a supraparticle-based approach. Spherical supraparticles composed of nanosized MOF particles are fabricated by emulsion templating and they are used as the structural component forming a macroscopic material. Zeolitic imidazolate framework-8 (ZIF-8) particles are used as a model system and the gas-adsorption kinetics of the hierarchical material are compared with conventional pellets without structural hierarchy. It is demonstrated that a pellet packed with supraparticles exhibits a 30 times faster adsorption rate compared to an unstructured ZIF-8 powder pellet. These results underline the importance of controlling structural hierarchy to maximize the performance of existing materials. In the hierarchical MOFs, large macropores between the supraparticles, smaller macropores between individual ZIF-8 primary particles, and micropores inherent to the ZIF-8 framework collude to combine large surface area, defined adsorption sites, and efficient mass transport to enhance performance.

Single-Pixel-Adjustable Structural Color Fabricated Using a Spatially Modulated Femtosecond Laser

Structural colors provide a highly stable and ecofriendly dyeing mechanism. The ability to adjust structural colors by a single pixel enhances their flexibility and application range. However, achieving single-pixel control and dynamic adjustment of structural colors remain a challenge yet. In this study, we propose a coloring method involving microcurve surfaces fabricated using a spatially modulated femtosecond laser hybrid technology, which combines spatially modulated femtosecond laser-assisted wet etching and molding. The fabricated microcurve surface exhibits bright colors under white light irradiation, and the color of each pixel can be adjusted independently by changing the morphology of the modified region inside fused silica using a femtosecond laser. With the high flexibility of femtosecond laser fabrication, color lightness can be accurately controlled through the quantitative adjustment of the arrangement of microcurve surfaces in an array, and various color patterns can be fabricated through the programmable arrangement of different microcurve surfaces. Additionally, the color exhibits strong dynamic characteristics, that is, different colors correspond to different external forces.

Communicating Supraparticles to Enable Perceptual, Information-Providing Matter

Materials are the fundament of the physical world, whereas information and its exchange are the centerpieces of the digital world. Their fruitful synergy offers countless opportunities for realizing desired digital transformation processes in the physical world of materials. Yet, to date, a perfect connection between these worlds is missing. From the perspective, this can be achieved by overcoming the paradigm of considering materials as passive objects and turning them into perceptual, information-providing matter. This matter is capable of communicating associated digitally stored information, for example, its origin, fate, and material type as well as its intactness on demand. Herein, the concept of realizing perceptual, information-providing matter by integrating customizable (sub-)micrometer-sized communicating supraparticles (CSPs) is presented. They are assembled from individual nanoparticulate and/or (macro)molecular building blocks with spectrally differentiable signals that are either robust or stimuli-susceptible. Their combination yields functional signal characteristics that provide an identification signature and one or multiple stimuli-recorder features. This enables CSPs to communicate associated digital information on the tagged material and its encountered stimuli histories upon signal readout anywhere across its life cycle. Ultimately, CSPs link the materials and digital worlds with numerous use cases thereof, in particular fostering the transition into an age of sustainability.

Stimulus-responsive nonclose-packed photonic crystals: fabrications and applications

Stimulus-responsive photonic crystals (PCs) possessing unconventional nonclosely packed structures have received growing attention due to their unique capability of mimicking the active structural colors of natural organisms (for example, chameleons' mechanochromic properties). However, there is rarely any systematic review regarding the progress of nonclose-packed photonic crystals (NPCs), involving their fabrication, working mechanisms, and applications. Herein, a comprehensive review of the fundamental principles and practical fabrication strategies of one/two/three-dimensional NPCs is summarized from the perspective of designing nonclose-packed structures. Subsequently, responsive NPCs with exciting functions and working mechanisms are sorted and delineated according to their diverse responses to physical (force, temperature, magnetic, and electric fields), chemical (ions, pH, vapors, and solvents), and biological (glucose, organophosphate, creatinine, and bacteria) stimuli. We then systematically introduced and discussed the applications of NPCs in sensors, printing, anticounterfeiting, display, optical devices, etc. Finally, the current challenges and development prospects for NPCs are presented. This review not only concludes the design principle for NPCs but also provides a significant basis for the exploration of next-generation NPCs.

Influence of surface roughness of universal shade resin composites on color adjustment potential

This study aimed to determine the influence of surface roughness of the color adjustment potential restoration of universal resin composites. A structural colored resin composite (Omnichroma, OC) and a pigment-employed universal shade resin composite (Beautifil Unishade, BU) were used. Each resin composite was placed in a cavity to determine its ability to match the color of artificial teeth. The surface of the resin composites was polished with #800- or #2000-grit SiC paper before performing color measurements. One-way analysis of variance and Tukey post hoc tests were performed (α=0.05). The color difference (ΔE*ab) ranged from 2.5-3.9 for OC and 1.8-8.7 for BU. OC has a more stable color adjustment than BU. The color adjustment potential of universal resin composites was affected by the surface roughness of the restorations.

Multicolor Electrochromic Display and Patterned Device Based on Hollow-SiO2-Supported WO3 Photonic Crystals

Electrochromic photonic crystals (PCs) have been intensively studied in the field of display, sensors, and intelligent materials due to their tunable brilliant structural colors. The mostly studied electrochromic PCs are based on the tunable lattice parameter after electrifying; namely, the electrochromic process is caused by the structural change of PCs. Besides the lattice parameter, the refractive index is another key factor to determine the structural color of PCs. Here, a kind of hollow-SiO2-supported WO3 (H-SiO2/WO3) PCs is designed, where the refractive index of the WO3 portion is changeable under charging. Benefiting from the support effect and tunable thickness of H-SiO2, large-area PC samples with good surface morphology and bright multicolor output are prepared. The reflection peaks of these composite PCs can shift by 30-90 nm, and their corresponding colors changed obviously after the voltage was applied. After being pixelated by laser-marking, the H-SiO2/WO3 PCs can dynamically display different numeric and alphabetic patterns in an electric-driven writing and erasing process. Not only does this composite PC structure broaden the color change range of WO3-based materials but also avoids the structural change in the electrochromic process. This work provides more possibilities for electrochromic PCs in the field of color-changing pattern displays.

Reconfigurable Grating Diffraction Structural Color in Self-Assembled Colloidal Crystals

Self-assembled colloidal crystals display structural colors due to light diffracted from their microscale, ordered structure. This color arises due to Bragg reflection (BR) or grating diffraction (GD); the latter mechanism is much less explored than the former. Here the design space for generating GD structural color is identified and its relative advantages are demonstrated. Electrophoretic deposition is used to self-assemble crystals with fine crystal grains from colloids of diameter 1.0 µm. The structural color in transmission is tunable across the full visible spectrum. The optimum optical response-represented by both color intensity and saturation-is observed at low layer number (≤5 layers). The spectral response is well predicted by Mie scattering of the crystals. Taken together, the experimental and theoretical results demonstrate that vivid grating colors with high color saturation can be produced from thin layers of micron-sized colloids. These colloidal crystals extend the potential of artificial structural color materials.

Patterning Complex Line Motifs in Thin Films Using Immersion-Controlled Reaction-Diffusion

The discovery of self-organization principles that enable scalable routes toward complex functional materials has proven to be a persistent challenge. Here, reaction-diffusion driven, immersion-controlled patterning (R-DIP) is introduced, a self-organization strategy using immersion-controlled reaction-diffusion for targeted line patterning in thin films. By modulating immersion speeds, the movement of a reaction-diffusion front over gel films is controlled, which induces precipitation of highly uniform lines at the reaction front. A balance between the immersion speed and diffusion provides both hands-on tunability of the line spacing (d = 10 - 300 μ m $d = 10-300 \; \umu \text{m}$ ) as well as error-correction against defects. This immersion-driven patterning strategy is widely applicable, which is demonstrated by producing line patterns of silver/silver oxide nanoparticles, silver chromate, silver dichromate, and lead carbonate. Through combinatorial stacking of different line patterns, hybrid materials with multi-dimensional patterns such as square-, diamond-, rectangle-, and triangle-shaped motifs are fabricated. The functionality potential and scalability is demonstrated by producing both wafer-scale diffraction gratings with user-defined features as well as an opto-mechanical sensor based on Moiré patterning.

Bio-inspired optical structures for enhancing luminescence

Luminescence is an essential signal for many plants, insects, and marine organisms to attract the opposite sex, avoid predators, and so on. Most luminescent living organisms have ingenious optical structures which can help them get high luminescent performances. These remarkable and efficient structures have been formed by natural selection from long-time evolution. Researchers keenly observed the enhanced luminescence phenomena and studied how these phenomena happen in order to learn the characteristics of bio-photonics. In this review, we summarize the optical structures for enhancing luminescence and their applications. The structures are classified according to their different functions. We focus on how researchers use these biological inspirations to enhance different luminescence processes, such as chemiluminescence (CL), photoluminescence (PL), and electroluminescence (EL). It lays a foundation for further research on the applications of luminescence enhancement. Furthermore, we give examples of luminescence enhancement by bio-inspired structures in information encryption, biochemical detection, and light sources. These examples show that it is possible to use bio-inspired optical structures to solve complex problems in optical applications. Our work will provide guidance for research on biomimetic optics, micro- and nano-optical structures, and enhanced luminescence.

Crack-Free Structural Color Materials Prepared without Disrupting the Particle Arrangement by Controlling the Internal Stress Relaxation and Interactions of the Melanin Particles

In fabricating structural color materials with assembled colloidal particles, there is a trade-off between the internal stresses acting on the particles and the interactions between the particles during solvent volatilization. It is crucial to fabricate crack-free materials that maintain the periodic arrangements of the particles by understanding the mechanism for crack initiation. Here, we focused on the composition and additives of melanin particle dispersions to obtain crack-free structural color materials without disturbing the particle arrangements. The use of a water/ethanol mixture as a dispersant effectively reduced the internal stresses of the particles during solvent evaporation. Furthermore, the addition of low-molecular-weight, low-volatility ionic liquids ensured that the arrangement and interactions of the particles were maintained after solvent volatilization. Optimization of the composition and additives of the dispersion made it possible to achieve crack-free melanin-based structural color materials while maintaining vivid, angular-dependent color tones.

Convolutional neural network-based colloidal self-assembly state classification

Colloidal self-assembly is a viable solution to making advanced metamaterials. While the physicochemical properties of the particles affect the properties of the assembled structures, particle configuration is also a critical determinant factor. Colloidal self-assembly state classification is typically achieved with order parameters, which are aggregate variables normally defined with nontrivial exploration and validation. Here, we present an image-based framework to classify the state of a 2-D colloidal self-assembly system. The framework leverages deep learning algorithms with unsupervised learning for state classification and a supervised learning-based convolutional neural network for state prediction. The neural network models are developed using data from an experimentally validated Brownian dynamics simulation. Our results demonstrate that the proposed approach gives a satisfying performance, comparable and even outperforming the commonly used order parameters in distinguishing void defective states from ordered states. Given the data-based nature of the approach, we anticipate its general applicability and potential automatability to different and complex systems where image or particle coordination acquisition is feasible.

Quantitative Optical and Structural Comparison of 3D and (2+1)D Colloidal Photonic Crystals

Colloidal crystals are excellent model systems to study self-assembly and structural coloration because their periodicities coincide with the wavelength range of visible light. Different assembly methods inherently introduce characteristic defects and irregularities, even with nearly monodisperse colloidal particles. Here, we investigate how these imperfections influence the structural coloration by comparing two techniques to obtain colloidal crystals. 3D colloidal crystals produced by convective assembly are well-ordered and periodically arranged but show microscopic cracks. (2+1)D colloidal crystals fabricated by stacking individual monolayers show a decreased hexagonal order and limited crystal registration between single monolayers in the z-direction. We investigate the optical properties of both systems by comparing identical numbers of layers using correlative microspectroscopy. These measurements show that the less ordered (2+1)D colloidal crystals exhibit higher reflected light intensities. Macroscopic reflection integrating all angles shows that the reflected light intensity levels out with an increasing number of layers, whereas incoherent scattering increases. Although both types of colloidal crystal show similar angle-dependent color shifts in specular reflection, the less-ordered structure of the (2+1)D colloidal crystal scatters light within a larger angular range under diffusive illumination. Our results suggest that structural coloration is surprisingly robust toward local defects and irregularities.

Full Control of Plasmonic Nanocavities Using Gold Decahedra-on-Mirror Constructs with Monodisperse Facets

Bottom-up assembly of nanoparticle-on-mirror (NPoM) nanocavities enables precise inter-metal gap control down to ≈ 0.4 nm for confining light to sub-nanometer scales, thereby opening opportunities for developing innovative nanophotonic devices. However limited understanding, prediction, and optimization of light coupling and the difficulty of controlling nanoparticle facet shapes restricts the use of such building blocks. Here, an ultraprecise symmetry-breaking plasmonic nanocavity based on gold nanodecahedra is presented, to form the nanodecahedron-on-mirror (NDoM) which shows highly consistent cavity modes and fields. By characterizing > 20 000 individual NDoMs, the variability of light in/output coupling is thoroughly explored and a set of robust higher-order plasmonic whispering gallery modes uniquely localized at the edges of the triangular facet in contact with the metallic substrate is found. Assisted by quasinormal mode simulations, systematic elaboration of NDoMs is proposed to give nanocavities with near hundred-fold enhanced radiative efficiencies. Such systematically designed and precisely-assembled metallic nanocavities will find broad application in nanophotonic devices, optomechanics, and surface science.

A Novel Ultra-Wideband Electromagnetic-Wave-Absorbing Metastructure Inspired by Bionic Gyroid Structures

Traditional honeycomb-like structural electromagnetic (EM)-wave-absorbing materials have been widely used in various equipment as multifunctional materials. However, current EM-wave-absorbing materials are limited by narrow absorption bandwidths and incidence angles because of their anisotropic structural morphology. The work presented here proposes a novel EM-wave-absorbing metastructure with an isotropic morphology inspired by the gyroid microstructures seen in Parides sesostris butterfly wings. A matching redesign methodology between the material and subwavelength scale properties of the gyroid microstructure is proposed, inspired by the interaction mechanism between the microstructure and the material properties on the EM-wave-absorption performance of the prepared metastructure. The bioinspired metastructure is fabricated by additive manufacturing (AM) and subsequent coating through dipping processes, filled with dielectric lossy materials. Based on simulations and experiments, the metastructure designed in this work exhibits an ultrawide absorption bandwidth covering the frequency range of 2-40 GHz with a fractional bandwidth of 180% at normal incidence. Moreover, the metastructure has a stable frequency response when the incident angle is 60° under transverse electric (TE) and transverse magnetic (TM) polarization. Finally, the synergistic mechanism between the microstructure and the material is elucidated, which provides a new paradigm for the design of novel ultra-broadband EM-absorbing materials.

From Meso to Macro: Controlling Hierarchical Porosity in Supraparticle Powders

A drying droplet containing colloidal particles can consolidate into a spherical assembly called a supraparticle. Such supraparticles are inherently porous due to the spaces between the constituent primary particles. Here, the emergent, hierarchical porosity in spray-dried supraparticles is tailored via three distinct strategies acting at different length scales. First, mesopores (<10 nm) are introduced via the primary particles. Second, the interstitial pores are tuned from the meso- (35 nm) to the macro scale (250 nm) by controlling the primary particle size. Third, defined macropores (>100 nm) are introduced via templating polymer particles, which can be selectively removed by calcination. Combining all three strategies creates hierarchical supraparticles with fully tailored pore size distributions. Moreover, another level of the hierarchy is added by fabricating supra-supraparticles, using the supraparticles themselves as building blocks, which provide additional pores with micrometer dimensions. The interconnectivity of the pore networks within all supraparticle types is investigated via detailed textural and tomographic analysis. This work provides a versatile toolbox for designing porous materials with precisely tunable, hierarchical porosity from the meso- (3 nm) to the macroscale (≈10 µm) that can be utilized for applications in catalysis, chromatography, or adsorption.

Thermal vacuum de-oxygen fabrication of new catalytic pigments: SiO2@TiO2-x amorphous photonic crystals for formaldehyde removal

Eliminating benzene and formaldehyde pollution is indispensable after the popularity of colorful home decoration in current society. The possibility and advantages of vividly colorful amorphous photonic crystals (APCs) as catalytic pigments were established. Biomimetic synthesis of APCs is an effective approach to obtaining angle-independent structural colors. Herein, we introduce oxygen vacancies through thermal vacuum de-oxygenation to synthesize SiO₂@TiO_2-x APCs for angle-independent structural colors and enhanced photocatalytic performance in one step. Core-shell nanospheres with controllable particle size were synthesized using a mixed-solvent method as the structural unit of APCs to prepare seven structural colors: red, orange, yellow, green, cyan, blue, and purple. The photocatalytic activity of in situ fabricated SiO₂@TiO_2-x APCs was conspicuously enhanced by thermal vacuum deoxidation. An amorphous layer formed on the TiO₂ nanocrystals provides TiO_2-x with excellent spectral response to visible light, transient photocurrent, and surface photovoltage up to 38.44 μA cm^-2 and 28.8 mV, respectively. Black TiO_2-x absorbs incoherent scattering, causing APCs to generate vividly angle-independent structural colors. The existence of oxygen vacancies in TiO_2-x promotes electron activation and a synergistic effect with the photonic local effect of APCs in improving the degradation of formaldehyde by catalytic pigments, effectively protecting the beautiful living environment of human beings.

A Continuous Gradient Colloidal Glass

Colloidal crystals and glasses manipulate light propagation depending on their chemical composition, particle morphology, and mesoscopic structure. This light-matter interaction has been intensely investigated, but a knowledge gap remains for mesostructures comprising a continuous property gradient of the constituting particles. Here, a general synthetic approach to bottom-up fabrication of continuous size gradient colloidal ensembles is introduced. First, the technique synthesizes a dispersion with a specifically designed gradual particle size distribution. Second, self-assembly of this dispersion yields a photonic colloidal glass with a continuous size gradient from top to bottom. Local and bulk characterization methods are used to highlight the significant potential of this mesostructure, resulting in vivid structural colors along, and in superior light scattering across the gradient. The process describes a general pathway to mesoscopic gradients. It can expectedly be transferred to a variety of other particle-based systems where continuous gradients will provide novel physical insights and functionalities.

Effect of filler load on structural coloration and color adjustment potential of resin composites

The color-matching ability of single-shade composites Omnichroma (OMN) and Omnichroma Flow (OCF) is ensured by structural color, which arises from monodisperse 260 nm spherical fillers. This study evaluated how filler load influences the color adjustment potential of composite restorations to human teeth of various shades. The performance of composites containing the 260 nm spherical fillers -OMN (79 wt%), OCF (71 wt%), and experimental composites R1 (65 wt%), and R2 (60 wt%)- was compared to two conventional A2-shade composites and a transparent composite. Additionally, the translucency parameter, spectral reflectance, and light transmission properties were assessed. Composites with a lower load of the 260 nm spherical fillers exhibited lower light diffusion and lower reflectance in the yellow-to-red range (580-650 nm), which is characteristic for the structural color of OMN and OCF. The best color adjustment was achieved with OCF, presumably due to its high translucency and uniform spectral reflectance.

Structurally colored aramid fabric construction and its application as a recyclable photonic catalyst

Structural colors can be used in fabric coloring due to their bright color and non-fading properties. However, it is still a challenge to construct structural color on high crystallinity, smooth surfaced and yellow colored aramid fabrics. Herein, for the first time, photonic crystals (PCs) with structural color were constructed on aramid fabrics by introducing dopamine to modify aramid fabrics and synthesizing monodisperse high refractive index zinc sulfide nanoparticles (ZnS). The influence of the PC coatings on the structural color, mechanical properties, and thermal stability of the structurally colored aramid fabrics or fibers was further investigated. Moreover, due to the excellent catalytic properties of ZnS and the slow photon effects of PCs, the structurally colored fabrics showed good photocatalytic properties, which will be beneficial in reusing the catalysts, which is crucial to their application in the coloring of fabrics but also facilitates the recycling of waste PC coated aramid fabrics.

Acoustic Crystallization of 2D Colloidal Crystals

2D colloidal crystallization provides a simple strategy to produce defined nanostructure arrays over macroscopic areas. Regularity and long-range order of such crystals is essential to ensure functionality, but difficult to achieve in self-assembling systems. Here, a simple loudspeaker setup for the acoustic crystallization of 2D colloidal crystals (ACDC) of polystyrene, microgels, and core-shell particles at liquid interfaces is introduced. This setup anneals an interfacial colloidal monolayer and affords an increase in average grain size by almost two orders of magnitude. The order is characterized via the structural color of the colloidal crystal, the acoustic annealing process is optimized via the frequency and the amplitude of the applied sound wave, and its efficiency is rationalized via the surface coverage-dependent interactions within the interfacial colloidal monolayer. Computer simulations show that multiple rearrangement mechanisms at different length scales, from the local motion around voids to grain boundary movements via consecutive particle rotations around common centers, collude to remove defects. The experimentally simple ACDC process, paired with the demonstrated applicability toward complex particle systems, provides access to highly defined nanostructure arrays for a wide range of research communities.

Bioinspired Colloidal Photonic Composites: Fabrications and Emerging Applications

Organisms in nature have evolved unique structural colors and stimuli-responsive functions for camouflage, warning, and communication over millions of years, which are essential to their survival in harsh conditions. Inspired by these characteristics, colloidal photonic composites (CPCs) composed of colloidal photonic crystals embedded in the polymeric matrix are artificially prepared and show great promise in applications. This review focuses on the summary of building blocks, i.e., colloidal particles and polymeric matrices, and constructive strategies from the perspective of designing CPCs with robust performance and specific functionality. Furthermore, their state-of-the-art applications are also discussed, including colorful coatings, anti-counterfeiting, and regulation of photoluminescence, especially in the field of visualized sensing. Finally, current challenges and potential for future developments in this field are discussed. The purpose of this review is not only to clarify the design principle for artificial CPCs but also to serve as a roadmap for the exploration of next-generation photonic materials.

Spray-Dried Photonic Balls with a Disordered/Ordered Hybrid Structure for Shear-Stress Indication

Optical microscale shear-stress indicator particles are of interest for the in situ recording of localized forces, e.g., during 3D printing or smart skins in robotic applications. Recently developed particle systems are based on optical responses enabled by integrated organic dyes. They thus suffer from potential chemical instability and cross-sensitivities toward humidity or temperature. These drawbacks can be circumvented using photonic balls as shear-stress indicator particles, which employ structural color as the element to record forces. Here, such photonic balls are prepared from silica and iron oxide nanoparticles via the scalable and fast spray-drying technique. Process parameters to create photonic balls with a disordered core and an ordered particle structure toward the exterior of the supraparticles are reported. This hybrid disordered-ordered structure is responsible for a color loss of the indicator particles during shear-stress application because of irreversible structural destruction. By adjusting the primary silica particle sizes, nearly all colors of the visible spectrum can be achieved and the sensitivity of the response to shear stress can be adjusted.

Biomimetic Self-Assembling Metal-Organic Architectures with Non-Iridescent Structural Coloration for Synergetic Antibacterial and Osteogenic Activity of Implants

Materials in nature feature versatile and programmable interactions to render macroscopic architectures with multiscale structural arrangements. By rationally combining metal-carboxylate and metal-organophosphate coordination interactions, Au₂₅(MHA)₁₈ (MHA, 6-mercaptohexanoic acid) nanocluster self-assembled structural color coating films and phytic acid (PA)-metal coordination complexes are sequentially constructed on the surface of titanium implants. The Lewis acid-base coordination principle applies for these metal-organic coordination networks. The isotropic arrangement of nanoclusters with a short-range order is investigated via grazing incidence wide-angle X-ray scattering. The integration of robust M-O (M = Ti, Zr, Hf) and labile Cu-O coordination bonds with high connectivity of Au₂₅(MHA)₁₈ nanoclusters enables these artificial photonic structures to achieve a combination of mechanical stability and bacteriostatic activity. Moreover, the colorless and transparent PA-metal complex layer allows the viewing of the structural color and surface wettability switching to hydrophilic and makes feasible the interfacial biomineralization of hydroxyapatite. Collectively, these modular metal-organic coordination-driven assemblies are predictive and rational material design strategies with tunable hierarchy and diversity. The complete metal-organic architectures will not only help improve the physicochemical properties of the bone-implant interface with synergistic antibacterial and osseointegration activities but also can boost surface engineering of medical metal implants.

The visual appearances of disordered optical metasurfaces

Nanostructured materials have recently emerged as a promising approach for material appearance design. Research has mainly focused on creating structural colours by wave interference, leaving aside other important aspects that constitute the visual appearance of an object, such as the respective weight of specular and diffuse reflectances, object macroscopic shape, illumination and viewing conditions. Here we report the potential of disordered optical metasurfaces to harness visual appearance. We develop a multiscale modelling platform for the predictive rendering of macroscopic objects covered by metasurfaces in realistic settings, and show how nanoscale resonances and mesoscale interferences can be used to spectrally and angularly shape reflected light and thus create unusual visual effects at the macroscale. We validate this property with realistic synthetic images of macroscopic objects and centimetre-scale samples observable with the naked eye. This framework opens new perspectives in many branches of fine and applied visual arts.

Recording Temperature with Magnetic Supraparticles

Small-sized temperature indicator additives autonomously record temperature events via a gradual irreversible signal change. This permits, for instance, the indication of possible cold-chain breaches or failure of electronics but also curing of glues. Thus, information about the materials' thermal history can be obtained upon signal detection at every point of interest. In this work, maximum-temperature indicators with magnetic readout based on micrometer-sized supraparticles (SPs) are introduced. The magnetic signal transduction is, by nature, independent of the materials' optical properties. This facilitates the determination of valuable temperature information from the inside, that is, the bulk, even of dark and opaque macroscopic objects, which might differ from their surface. Compared to state-of-the-art optical temperature indicators, complementary magnetic readout characteristics ultimately expand their applicability. The conceptualized SPs are hierarchically structured assemblies of environmentally friendly, inexpensive iron oxide nanoparticles and thermoplastic polymer. Irreversible structural changes, induced by polymer softening, yield magnetic interaction changes within and between the hierarchic sub-structures, which are distinguishable and define the temperature indication mechanism. The fundamental understanding of the SPs' working principle enables customization of the particles' working range, response time, and sensitivity, using a toolbox-like manufacturing approach. The magnetic signal change is detected self-referenced, fast, and contactless.

Three-dimensional printing of photonic colloidal glasses into objects with isotropic structural color

Structural color is frequently exploited by living organisms for biological functions and has also been translated into synthetic materials as a more durable and less hazardous alternative to conventional pigments. Additive manufacturing approaches were recently exploited for the fabrication of exquisite photonic objects, but the angle-dependence observed limits a broader application of structural color in synthetic systems. Here, we propose a manufacturing platform for the 3D printing of complex-shaped objects that display isotropic structural color generated from photonic colloidal glasses. Structurally colored objects are printed from aqueous colloidal inks containing monodisperse silica particles, carbon black, and a gel-forming copolymer. Rheology and Small-Angle-X-Ray-Scattering measurements are performed to identify the processing conditions leading to printed objects with tunable structural colors. Multimaterial printing is eventually used to create complex-shaped objects with multiple structural colors using silica and carbon as abundant and sustainable building blocks.

There is a growing interest in mimicking structural color in natural systems aiming for sustainable and long-lasting color. Here the authors report a platform for three-dimensional printing assembly of colloidal particles of silica and carbon that have programmable structural color.

High-Efficiency, Mass-Producible, and Colored Solar Photovoltaics Enabled by Self-Assembled Photonic Glass

Building-integrated photovoltaics is a crucial technology for developing zero-energy buildings and sustainable cities, while great efforts are required to make photovoltaic (PV) panels aesthetically pleasing. This places an urgent demand on PV colorization technology that has a low impact on power conversion efficiency (PCE) and is simultaneously mass-producible at a low cost. To address this challenge, this study contributes a colorization strategy for solar PVs based on short-range correlated dielectric microspheres, i.e., photonic glass. Through theoretical studies, first we demonstrate that the photonic glass self-assembled by high-index microspheres could enable both colored solar cells and modules, with easily variable colors and negligible parasitic absorption. By a fast spray coating process of colloidal monodisperse ZnS microspheres, we show the photonic glass layer could be easily deposited on silicon solar cells, enabling them to have structural colors. Through varying microsphere sizes, solar cells with different colors are achieved, showing low PCE loss compared to normal black cells. These colored solar cells are also encapsulated with a general lamination process to produce PV modules with various colors and patterns at a stunning PCE approaching 21%. Moreover, the long-term stability is subsequently verified by aging tests including an outdoor exposure for 10 days and a damp-heat test for 1000 h, and the mass producibility is demonstrated by presenting a colored PV panel with an output power over 108 W. These results confirm photonic glass as a promising strategy for colored PVs possessing high efficiency and practical applicability.

Towards scalable plasmonic Fano-resonant metasurfaces for colorimetric sensing

Transitioning plasmonic metasurfaces into practical, low-cost applications requires meta-atom designs that focus on ease of manufacturability and a robustness with respect to structural imperfections and nonideal substrates. It also requires the use of inexpensive, earth-abundant metals such as Al for plasmonic properties. In this study, we focus on combining two aspects of plasmonic metasurfaces-visible coloration and Fano resonances-in a morphology amenable to scalable manufacturing. The resulting plasmonic metasurface is a candidate for reflective colorimetric sensing. We examine the potential of this metasurface for reflective strain sensing, where the periodicity of the meta-atoms could ultimately be modified by a potential flexion, and for localized surface plasmon resonance refractive index sensing. This study evaluates the potential of streamlined meta-atom design combined with low-cost metallization for inexpensive sensor readout based on human optical perception.

Multi-compartment supracapsules made from nano-containers towards programmable release

The assembly of nanomaterials into suprastructures offers the possibility to fabricate larger scale functional materials, whose inner structure strongly influences their functionality for a vast range of applications. In spite of the many current strategies, achieving multi-compartment structures in a targeted and versatile way remains highly challenging. Here, we describe a controllable and straightforward route to create uniform suprastructured materials with a multi-compartmentalized architecture by confining primary nanocapsules into droplets using a cross-junction microfluidic device. Following solvent evaporation from the droplets, the nanocapsules spontaneously assemble into precisely sized multi-compartment particles, which we term supracapsules. Thanks to the process, each spatially separated nanocapsule unit retains its cargo and functionalities within the resulting supracapsules. However, new collective properties emerge, and, particularly, programmable release profiles that are distinct from those of single-compartment capsules. Finally, the suprastructures can be disassembled into single-compartment units by applying ultra-sonication, switching their release to a burst-release mode. These findings open up exciting opportunities to fabricate multi-compartment suprastructures incorporating diverse functionalities for materials with emerging properties.

Dual-Colored Janus Microspheres with Photonic and Plasmonic Faces

Photonic and plasmonic colors, stemming from nanostructures of dielectric materials and metals, are promising for pigment-free coloration. In particular, nanostructures with structural colors have been employed in stimuli-responsive Janus microparticles to provide active color pixels. Here, the authors report a simple strategy to produce electro-responsive Janus microspheres composed of photonic and plasmonic faces for active color change. The photonic microspheres are first prepared by self-assembly of silica particles in emulsion droplets of photocurable resin. The silica particles form 3D crystalline arrays in the interior and 2D hexagonal arrays on the interface. The emulsion droplets are photocured and the silica particles are selectively removed to make porous photonic microspheres with hexagonal arrays of dimples on the surface. Directional deposition of gold or aluminum on the photonic microsphere develops plasmonic color on the top hemisphere while maintaining photonic color on the bottom hemisphere. Moreover, the metal deposited on one side renders the Janus microspheres electro-responsive. Therefore, the photonic and plasmonic colors are switchable by the orientation control of the Janus microspheres with an external electric field. The photonic and plasmonic colors are independently adjustable by employing two different sizes of silica particles in core-shell emulsion drops.

Lipophilic Magnetic Photonic Nanochains for Practical Anticounterfeiting

Magnetic photonic crystals (PCs) possess attractive magnetic orientation, flexible pattern designability, and abundant angle-dependent colors, providing immense potential in anticounterfeiting field. However, all-solid magnetic PCs-based labels generally suffer from incompatibility with screen printing techniques, and inferior environmental endurance and mechanical properties. Herein, by developing a selective concentration polymerization method under magnetic field (H) in microheterogenous dimethyl sulfoxide-water binary solvents, individual tens-of-micrometer-length lipophilic magnetic photonic nanochains (PNCs) of full-width at half-maxima below 30 nm are fabricated, which, after simply dispersed in solvent-free cycloaliphatic epoxy resin, can be formulated as photonic inks to print robust anticounterfeiting labels through an H-assisted screen-printing technology. The as-printed labels possess vivid optically variable effects (OVEs) associated with the spatial distribution of H directionality, which are easy to identify by the naked eye but difficult to imitate and duplicate, while they show excellent environmental resistance and mechanical properties, promising practical applications in banknotes and high-grade commodities. The polymerization mechanism of the lipophilic PNCs is elucidated, and the OVEs are deciphered in numerical simulation. Besides an efficient way to build organic-inorganic hybrid nanostructures, the work provides advanced structural color pigments to achieve the practical application of magnetic PCs in such an anticounterfeiting field.