Construction of Magnetoelectric Composites with a Large Room-Temperature Magnetoelectric Response through Molecular-Ionic Ferroelectrics

The past 10 years of molecular ferroelectrics: structures, design, and properties

Ferroelectricity, which has diverse important applications such as memory elements, capacitors, and sensors, was first discovered in a molecular compound, Rochelle salt, in 1920 by Valasek. Owing to their superiorities of lightweight, biocompatibility, structural tunability, mechanical flexibility, etc., the past decade has witnessed the renaissance of molecular ferroelectrics as promising complementary materials to commercial inorganic ferroelectrics. Thus, on the 100th anniversary of ferroelectricity, it is an opportune time to look into the future, specifically into how to push the boundaries of material design in molecular ferroelectric systems and finally overcome the hurdles to their commercialization. Herein, we present a comprehensive and accessible review of the appealing development of molecular ferroelectrics over the past 10 years, with an emphasis on their structural diversity, chemical design, exceptional properties, and potential applications. We believe that it will inspire intense, combined research efforts to enrich the family of high-performance molecular ferroelectrics and attract widespread interest from physicists and chemists to better understand the structure-function relationships governing improved applied functional device engineering.

Unique Perovskitizer N─Pb Bond Switching Induced Polar Photovoltaic Effect in Trilayered Hybrid Perovskite

Polar photovoltaic effect (PPE) has attracted great attention in regulating desired optoelectronic properties, which can be driven by order-disorder and displacive phase transitions. Bond-switching is also a feasible method to induce PPE, but such investigation is very rare. Lead-halide hybrid perovskite (LHHP) is an outstanding photodetection material; lead atoms possess rich coordination modes to provide possibilities to construct switchable bonds. Here, a unique perovskitizer N─Pb bond-switching is disclosed to induce polar photovoltage in the emerging LHHP, PA2MHy2Pb3Br10 (1, PA = n-propylamine, MHy = methylhydrazine). Interestingly, the perovskitizer MHy+ provides 2s2 lone pair while the Pb atom affords empty d orbitals, which coordinate with each other to generate a flexible N─Pb bond. Further, the introduction of N─Pb bonds results in a high distortion of the PbBr6 octahedron to form local polarity and further orientation to induce spontaneous polarization. More importantly, such a flexible N─Pb bond switching mechanism drives a notable PPE and controllable polarized photo-response, a polarization ratio up to 9.7 at the polar phase in striking contrast with the non-polar phase (1.03). The work provides the first demonstration of bond-switching to induce polar phase transition and polar photovoltage in the photoconductive hybrid perovskites for photoelectric applications.

Biodegradable ferroelectric molecular crystal with large piezoelectric response

Transient implantable piezoelectric materials are desirable for biosensing, drug delivery, tissue regeneration, and antimicrobial and tumor therapy. For use in the human body, they must show flexibility, biocompatibility, and biodegradability. These requirements are challenging for conventional inorganic piezoelectric oxides and piezoelectric polymers. We discovered high piezoelectricity in a molecular crystal HOCH2(CF2)3CH2OH [2,2,3,3,4,4-hexafluoropentane-1,5-diol (HFPD)] with a large piezoelectric coefficient d33 of ~138 picocoulombs per newton and piezoelectric voltage constant g33 of ~2450 × 10-3 volt-meters per newton under no poling conditions, which also exhibits good biocompatibility toward biological cells and desirable biodegradation and biosafety in physiological environments. HFPD can be composite with polyvinyl alcohol to form flexible piezoelectric films with a d33 of 34.3 picocoulombs per newton. Our material demonstrates the ability for molecular crystals to have attractive piezoelectric properties and should be of interest for applications in transient implantable electromechanical devices.

CO2 -Induced Spin-Lattice Coupling for Strong Magnetoelectric Materials

The preparation of 2D magnetoelectric (ME) nanomaterials with strong ME coupling is crucial for the fast reading and writing processes in the next generation of storage devices. Herein, 2D BaTiO3 (BTO)-CoFe2 O4 (CFO) ME nanocomposites are prepared through a substrate-free coupling strategy using supercritical CO2 . Such 2D BTO-CFO with strong coupling is built through alternating in-plane and out-of-plane epitaxy stacking, leading to remarkable mutual biaxial strain effects for spin-lattice coupling. As a results, such strain effect significantly enhances the ferroelectricity of BTO and the ferrimagnetism of CFO, where an unexceptionally high ME coupling coefficient of (325.8 mV cm-1  Oe-1 ) is obtained for the BTO-CFO nanocomposites.

The First Ring Enlargement Induced Large Piezoelectric Response in a Polycrystalline Molecular Ferroelectric

Inorganic ferroelectrics have long dominated research and applications, taking advantage of high piezoelectric performance in bulk polycrystalline ceramic forms. Molecular ferroelectrics have attracted growing interest because of their environmental friendliness, easy processing, lightweight, and good biocompatibility, while realizing the considerable piezoelectricity in their bulk polycrystalline forms remains a great challenge. Herein, for the first time, through ring enlargement, a molecular ferroelectric 1-azabicyclo[3.2.1]octonium perrhenate ([3.2.1-abco]ReO4 ) with a large piezoelectric coefficient d33 up to 118 pC/N in the polycrystalline pellet form is designed, which is higher than that of the parent 1-azabicyclo[2.2.1]heptanium perrhenate ([2.2.1-abch]ReO4 , 90 pC/N) and those of most molecular ferroelectrics in polycrystalline or even single crystal forms. The ring enlargement reduces the molecular strain for easier molecular deformation, which contributes to the higher piezoelectric response in [3.2.1-abco]ReO4 . This work opens up a new avenue for exploring high piezoelectric polycrystalline molecular ferroelectrics with great potential in piezoelectric applications.

Achieving High-Temperature Multiferroism by Atomic Architecture

Materials with multiple order parameters, typically, in which ferroelectricity and magnetism are coupled, are illuminative for next-generation multifunctional electronics. However, searching for such single-phase multiferroics is challenging owing to antagonistic orbital occupancy and chemical bonding requirements for polarity and magnetism. Appropriate multiferroic candidates have been proposed, but their practical implementation is impeded by the low working temperature, weak coupling between ferroic orders, or antiparallel spin alignment in magnetic sublattices. Here, we report a family of single-phase multiferroic materials in which high-temperature magnetism and voltage-switchable ferroelectricity are coupled. Using pulsed laser deposition, we have fabricated single-crystalline thin films incorporating a uniformly percolated open-shell dⁿ framework, which are composed of Fe cations with B-site occupancy and exhibit long-range spin ordering into the displacive ferroelectric PbTiO₃ lattice, as demonstrated by atomically resolved chemical analysis. The tetragonal polar Pb(Ti_1-x,Fe_x)O₃ (PFT(x), x ≤ 0.10) family exhibits a switchable ferroelectric nature and magnetic interaction with a moderate coercive field of around 300 Oe at room temperature. Notably, the magnetic order even persists above 500 K, which is higher than already reported potential multiferroic candidates until now. Our strategy of merging a spin-ordered sublattice into inherent ferroelectrics via atomic occupancy engineering provides an available pathway for highly thermally stable multiferroic and spintronic applications.

Ferroelectric Ionic Molecular Crystals with Significant Plasticity and a Low Melting Point: High Performance in Hot-Pressed Polycrystalline Plates and Melt-Grown Crystalline Sheets

Among ferroelectric crystals based on small molecules, plastic/ferroelectric crystals are currently receiving particular attention because they can be used as bulk polycrystals. Herein, we show that an ionic molecular ferroelectric crystal, guanidinium tetrafluoroborate, exhibits significant malleability and multiaxial ferroelectricity despite the absence of a plastic crystal phase. Powder samples of this crystal can be processed into transparent bulk crystalline plates either by press-forming or by melt-growing. The plates show high ferroelectric performance and related properties, demonstrating the largest hitherto reported spontaneous polarization for bulk polycrystals of small-molecule-based ferroelectrics. Owing to the ready availability of large-scale materials and processability into various bulk crystalline forms, this ferroelectric crystal represents a highly promising functional material that will boost research on diverse applications as bulk crystals.

Antiferroelectrics and Magnetoresistance in La0.5Sr0.5Fe12O19 Multiferroic System

The appearance of antiferroelectrics (AFE) in the ferrimagnetism (FM) system would give birth to a new type of multiferroic candidate, which is significant to the development of novel devices for energy storage. Here we demonstrate the realization of full antiferroelectrics in a magnetic La_0.5Sr_0.5Fe₁₂O₁₉ system (AFE+FM), which also presents a strong magnetodielectric response (MD) and magnetoresistance (MR) effect. The antiferroelectric phase was achieved at room temperature by replacing 0.5 Sr²⁺ ions with 0.5 La²⁺ ions in the SrFe₁₂O₁₉ compound, whose phase transition temperature of ferroelectrics (FE) to antiferroelectrics was brought down from 174 °C to -141 °C, while the temperature of antiferroelectrics converting to paraelectrics (PE) shifts from 490 °C to 234 °C after the substitution. The fully separated double P-E hysteresis loops reveal the antiferroelectrics in La_0.5Sr_0.5Fe₁₂O₁₉ ceramics. The magnitude of exerting magnetic field enables us to control the generation of spin current, which induces MD and MR effects. A 1.1T magnetic field induces a large spin current of 15.6 n A in La_0.5Sr_0.5Fe₁₂O₁₉ ceramics, lifts up dielectric constants by 540%, and lowers the resistance by -89%. The magnetic performance remains as usual. The multiple functions in one single phase allow us to develop novel intelligent devices.

Biferroelectricity of a homochiral organic molecule in both solid crystal and liquid crystal phases

Ferroelectricity, existing in either solid crystals or liquid crystals, gained widespread attention from science and industry for over a century. However, ferroelectricity has never been observed in both solid and liquid crystal phases of a material simultaneously. Inorganic ferroelectrics that dominate the market do not have liquid crystal phases because of their completely rigid structure caused by intrinsic chemical bonds. We report a ferroelectric homochiral cholesterol derivative, β-sitosteryl 4-iodocinnamate, where both solid and liquid crystal phases can exhibit the behavior of polarization switching as determined by polarization–voltage hysteresis loops and piezoresponse force microscopy measurements. The unique long molecular chain, sterol structure, and homochirality of β-sitosteryl 4-iodocinnamate molecules enable the formation of polar crystal structures with point group 2 in solid crystal phases, and promote the layered and helical structure in the liquid crystal phase with vertical polarization. Our findings demonstrate a compound that can show the biferroelectricity in both solid and liquid crystal phases, which would inspire further exploration of the interplay between solid and liquid crystal ferroelectric phases.

Ferroelectricity normally exists in either solid crystals or liquid crystals. Here, the authors report a homochiral organic compound which shows ferroelectricity in both solid crystal and liquid crystal phases.

Inorganic-Organic Hybrid Molecular Materials: From Multiferroic to Magnetoelectric

Inorganic-organic hybrid molecular multiferroic and magnetoelectric materials, similar to multiferroic oxide compounds, have recently attracted increasing attention because they exhibit diverse architectures, a flexible framework, fascinating physics, and potential magnetoelectric functionalities in novel multifunctional devices such as energy transformation devices, sensors, and information storage systems. Herein, the classification of multiferroicity and magnetoelectricity is briefly outlined and then the recent advances in the multiferroicity and magnetoelectricity of inorganic-organic hybrid molecular materials, particularly magnetoelectricity and the relevant magnetoelectric mechanisms and their categories are summarized. In addition, a personal perspective and an outlook are provided.

Molecular Ferroelectric-Based Flexible Sensors Exhibiting Supersensitivity and Multimodal Capability for Detection

Although excellent dielectric, piezoelectric, and pyroelectric properties matched with or even surpassing those of ferroelectric ceramics have been recently discovered in molecular ferroelectrics, their successful applications in devices are scarce. The fracture proneness of molecular ferroelectrics under mechanical loading precludes their applications as flexible sensors in bulk crystalline form. Here, self-powered flexible mechanical sensors prepared from the facile deposition of molecular ferroelectric [C(NH₂ )₃ ]ClO₄ onto a porous polyurethane (PU) matrix are reported. [C(NH₂ )₃ ]ClO₄ -PU is capable of detecting pressure of 3 Pa and strain of 1% that are hardly accessible by the state-of-the-art piezoelectric, triboelectric, and piezoresistive sensors, and presents the ability of sensing multimodal mechanical forces including compression, stretching, bending, shearing, and twisting with high cyclic stability. This scaling analysis corroborated with computational modeling provides detailed insights into the electro-mechanical coupling and establishes rules of engineering design and optimization for the hybrid sponges. Demonstrative applications of the [C(NH₂ )₃ ]ClO₄ -PU array suggest potential uses in interactive electronics and robotic systems.

Optical Control of Polarization Switching in a Single-Component Organic Ferroelectric Crystal

The optical control of polarization switching is attracting tremendous interest because photoirradiation stands out as a nondestructive, noncontact, and remote-control means beyond an electric or strain field. The current research mainly uses various photoexcited electronic effects to achieve the photocontrol polarization, such as a light-driven flexoelectric effect and a photovoltaic effect. However, since photochromism was discovered in 1867, the structural phase transition caused by photoisomerization has never been associated with ferroelectricity. Here, we successfully synthesized an organic photochromic ferroelectric with polar space group Pna2₁, 3,4,5-trifluoro-N-(3,5-di-tert-butylsalicylidene)aniline, whose color can change between yellow and orange via laser illumination. Its dielectric permittivity and spontaneous polarization can be switched reversibly with a photoinduced phase transition triggered by structural photoisomerization between the enol form and the trans-keto form. To our knowledge, this is the first photoswitchable ferroelectric crystal to achieve polarization switching through a structural phase transition triggered by photoisomerization. This finding paves the way toward photocontrol of smart materials and biomechanical applications in the future.

Organic Ferroelectric Vortex-Antivortex Domain Structure

Organic ferroelectrics are attracting tremendous interest because of their mechanical flexibility, ease of fabrication, and low acoustical impedance. Although great advances have been made in recent years, topological defects such as vortices remain relatively unexplored in the organic ferroelectric system. Here, from [quinuclidinium]ReO₄ ([Q]ReO₄), we applied the molecular design strategy of H/F substitution to successfully synthesize the organic ferroelectric [4-fluoroquinuclidinium]ReO₄ ([4-F-Q]ReO₄). Through H/F substitution, the Curie temperature and spontaneous polarization are respectively increased from 367 K and 5.83 μC/cm² in [Q]ReO₄ to 466 K and 11.37 μC/cm² in [4-F-Q]ReO₄. Moreover, under mechanical stress fields, three kinds of stripelike domains with various polarization directions emerge to form a windmill-like domain pattern in the thin film of [4-F-Q]ReO₄, in which intriguing vortex-antivortex topological configurations can exist stably. This work provides an efficient strategy for optimizing the properties of organic ferroelectrics and exploring emergent phenomena.

Design of Ionic-Liquid-Based Hybrid Polymer Materials with a Magnetoactive and Electroactive Multifunctional Response

Multifunctional materials with sensor and actuator capabilities play an increasing role in modern technology. In this scope, hybrid materials with magnetic sensing and an electromechanical actuator response based on magnetic ionic liquids (MILs) and the polymer poly(vinylidene fluoride) (PVDF) have been developed. MILs comprising different cation alkyl chain lengths [C_nmim]⁺ and sharing the same anion [FeCl₄]^- were incorporated at 20 wt % into the PVDF matrix and the morphological, physical, chemical, and functional properties of the materials were evaluated. An increasing IL alkyl chain length leads to the formation of a porous structure, together with an increase in the electroactive PVDF β-phase content of the polymer and a decrease in the crystallinity degree and thermal stability. The magnetic susceptibility of the [C_nmim][FeCl₄]/PVDF films reveals a paramagnetic behavior. The multifunctional response is characterized by a magnetoionic response that decreases with increasing IL alkyl chain length, the highest magnetoionic coefficient (1.06 ± 0.015 V cm^-1 Oe^-1) being observed for [C₂mim][FeCl₄]/PVDF. The electromechanical actuator response is characterized by a highest displacement of 1.1 mm for the [C₄mim][FeCl₄]/PVDF film by applying a voltage of 4 V at a frequency of 100 mHz. Further, their solution processing makes these multiresponsive materials compatible with additive manufacturing technologies.

Record Enhancement of Phase Transition Temperature Realized by H/F Substitution

A high transition temperature (T_c ) is essential for the practical application of ferroelectrics as electronic devices under extreme thermal conditions in the aerospace, automotive, and energy industries. In recent decades, the isotope effect and strain engineering are found to effectively modulate T_c ; however, these strategies are limited to certain systems. Developing simple, universal, and practical methods to improve T_c has become an imminent challenge for expanding the applications of ferroelectrics. Here, by adopting a molecular design strategy involving H/F substitution on an organic-inorganic hybrid perovskite (1-azabicyclo[2.2.1]heptane)CdCl₃ at a T_c of 190 K, the successful synthesis of a multiaxial, ferroelectric hybrid perovskite (4-fluoro-1-azabicyclo[2.2.1]heptane)CdCl₃ is reported, which demonstrates a large spontaneous polarization of 11.2 µC cm^-2 (greater than that of polyvinylidene difluoride) and a T_c of 419 K (greater than that of BaTiO₃ ). This temperature enhancement (229 K) is the largest reported for molecular ferroelectrics, far exceeding the reported enhancements induced by the isotope effect and other techniques. This pioneering technique provides an effective and universal method for improving T_c in ferroelectrics and represents an important step toward the development of high-performance ferroelectric technology.

Bistable molecular materials with dynamic structures

In this Feature Article, we introduce how to manipulate the motion of electrons or molecules by external stimuli, to achieve switchable properties in molecule-based single crystals.

Nitroprusside as a promising building block to assemble an organic–inorganic hybrid for thermo-responsive switching materials

A new nitroprusside-based hybrid (Me₂NH₂)[KFe(CN)₅(NO)] exhibits thermo-responsive switching behaviours on uniaxial expansivity and SHG signal owing to flexible host–guest hydrogen bonds and the synchronously deformable inorganic framework.

Plastic/Ferroelectric Crystals with Easily Switchable Polarization: Low-Voltage Operation, Unprecedentedly High Pyroelectric Performance, and Large Piezoelectric Effect in Polycrystalline Forms

Molecular ferroelectric crystals have attracted growing interest as potential alternatives to conventional lead-based ceramic ferroelectrics. We have recently discovered that a class of compounds known as plastic crystals can show multiaxial ferroelectricity, which allows ferroelectric performance even in polycrystalline forms. Here, we report new plastic/ferroelectric ionic molecular crystals that exhibit remarkably small coercive electric fields at room temperature. The easily switchable ferroelectric polarization enables low-voltage switching operations and high-frequency performance. Such ferroelectric crystals can be readily processed into bulk polycrystalline forms with desired shapes that are characterized by unprecedentedly high pyroelectric figures of merit and large piezoelectricity. These multifunctional molecular crystals represent highly attractive prospects for device elements with a diverse range of applications, which will significantly boost the development of molecular ferroelectric crystals.