Conjugated Donor-Acceptor Terpolymers Toward High-Efficiency Polymer Solar Cells

A Long-Range Planar Polymer with Efficient π-Electron Delocalization for Superior Proton Storage

Due to the unique "Grotthus mechanism", aqueous proton batteries (APBs) are promising energy devices with intrinsic safety and sustainability. Although polymers with tunable molecular structures are ideal electrode materials, their unsatisfactory proton-storage redox behaviors hinder the practical application in APB devices. Herein, a novel planar phenazine (PPHZ) polymer with a robust and extended imine-rich skeleton is synthesized and used for APB application for the first time. The long-range planar configuration achieves ordered molecular stacking and reduced conformational disorder, while the high conjugation with strong π-electron delocalization optimizes energy bandgap and electronic properties, enabling the polymer with low proton diffusion barriers, high redox activity, and superior electron affinity. As such, the PPHZ polymer as an electrode material exhibits fast, stable, and unrivaled proton-storage redox behaviors with a large capacity of 273.3 mAh g-1 at 0.5 A g-1 (1 C) in 1 M H2SO4 electrolyte, which is the highest value among proton-inserted electrodes in aqueous acidic electrolytes. Dynamic in situ techniques confirm the high redox reversibility upon proton uptake/removal, and the corresponding protonation pathways are elucidated by theoretical calculations. Moreover, a pouch-type APB cell using PPHZ electrode exhibits an ultralong lifespan over 30 000 cycles, further verifying its promising application prospect.

Leveraging Insulator's Tacticity in Semiconducting Polymer Blends

Blending conjugated polymers with insulating matrices is often utilized for engineering extrinsic properties in organic electronics. Semiconductor/insulator blends are typically processed to form a uniformly distributed network of conductive domains within the insulating matrix, marrying electronic and physical properties from individual components. Understanding of polymer-polymer interactions in such systems is thus crucial for property co-optimization. One of the commonly overlooked parameters is the structural configuration of the insulator on the resulting properties, especially the electronic properties. This study investigated how the tacticity of the matrix polymer, among other relevant parameters in play, impacts solid state crystallization in semiconductor/matrix blends and hence the resulting charge transport properties. We found an intricate dependence of the film morphology, aggregation behavior, electronic charge transport, and mixed ionic-electronic coupling properties on the insulator's tacticity. Our experimentally iterative approach shows that for a given application, when selecting semiconductor/insulator combinations, the tacticity of the matrix can be leveraged to optimize performance and vary solid-state structure.

From Chemical Drawing to Electronic Properties of Semiconducting Polymers in Bulk: A Tool for Chemical Discovery

A quantum chemistry (QC)/molecular dynamics (MD) scheme is developed to calculate electronic properties of semiconducting polymers in three steps: (i) constructing the polymer force field through a unified workflow, (ii) equilibrating polymer models, and (iii) calculating electronic structure properties (e.g., density of states and localization length) from the equilibrated models by QC approaches. Notably, as the second step of this scheme is generally the most time-consuming one, we introduce an alternative method to compute thermally averaged electronic properties in bulk, based on the simulation of a polymer chain in the solution of its repeat units, which is shown to reproduce the microstructure of polymer chains and their electrostatic effect (successfully tested for five benchmark polymers) 10 times faster than state-of-the-art methods. In fact, this scheme offers a consistent and speedy way of estimating electronic properties of polymers from their chemical drawings, thus ensuring the availability of a homogeneous set of simulations to derive structure-property relationships and material design principles. As an example, we show how the electrostatic effect of the polymer chain environment can disturb the localized electronic states at the band tails and how this effect is more significant in the case of diketopyrrolopyrrole polymers as compared to indacenodithiophene and dithiopheneindenofluorene ones.

Manipulating Intramolecular Charge Transfer and Supramolecular Interaction in D-A-D Conjugated Systems by Regioisomerization

Three new donor-acceptor-donor (D-A-D) architecture regioisomers comprising a large planar electron-withdrawing core tribenzo[a,c,i]phenazine and two identical electron-donating triphenylamines with different substitution patterns were designed and synthesized. Employing this regioisomerization strategy, the intramolecular charge-transfer interactions are effectively tuned and result in a significant bathochromic shift of photoluminescence maximum over 100 nm, which induces the corresponding emission band extending into the near-infrared region as well as giving a high solid-state quantum yield of 25%. Meanwhile, it is found that the supramolecular interactions of this series of regioisomers with planar electron-donor pyrene are greatly affected by the substitution pattern.

Regulating Crystallinity Mismatch Between Donor and Acceptor to Improve Exciton/Charge Transport in Efficient Organic Solar Cells

Achieving a more balanced charge transport by morphological control is crucial in reducing bimolecular and trap-assisted recombination and enhancing the critical parameters for efficient organic solar cells (OSCs). Hence, a facile strategy is proposed to reduce the crystallinity difference between donor and acceptor by incorporating a novel multifunctional liquid crystal small molecule (LCSM) BDTPF4-C6 into the binary blend. BDTPF4-C6 is the first LCSM based on a tetrafluorobenzene unit and features a low liquid crystal phase transition temperature and strong self-assembly ability, conducive to regulating the active layer morphology. When BDTPF4-C6 is introduced as a guest molecule into the PM6 : Y6 binary, it exhibits better compatibility with the donor PM6 and primarily resides within the PM6 phase because of the similarity-intermiscibility principle. Moreover, systematic studies revealed that BDTPF4-C6 could be used as a seeding agent for PM6 to enhance its crystallinity, thereby forming a more balanced and favourable charge transport with suppressed charge recombination. Intriguingly, dual Förster resonance energy transfer was observed between the guest molecule and the host donor and acceptor, resulting in an improved current density. This study demonstrates a facile approach to balance the charge mobilities and offers new insights into boosting the efficiency of single-junction OSCs beyond 20 %.

Stability of organic solar cells: toward commercial applications

Organic solar cells (OSCs) have attracted a great deal of attention in the field of clean solar energy due to their advantages of transparency, flexibility, low cost and light weight. Introducing them to the market enables seamless integration into buildings and windows, while also supporting wearable, portable electronics and internet-of-things (IoT) devices. With the development of photovoltaic materials and the optimization of fabrication technology, the power conversion efficiencies (PCEs) of OSCs have rapidly improved and now exceed 20%. However, there is a significant lack of focus on material stability and device lifetime, causing a severe hindrance to commercial applications. In this review, we carefully review important strategies employed to improve the stability of OSCs over the past three years from the perspectives of material design and device engineering. Furthermore, we analyze and discuss the current important progress in terms of air, light, thermal and mechanical stability. Finally, we propose the future research directions to overcome the challenges in achieving highly stable OSCs. We expect that this review will contribute to solving the stability problem of OSCs, eventually paving the way for commercial applications in the near future.

Discovery of Organic Optoelectronic Materials Powered by Oxidative Ar-H/Ar-H Coupling

Efficient and streamlined synthetic methods that facilitate the rapid build-up of structurally diverse π-conjugated systems are of paramount importance in the quest for organic optoelectronic materials. Among these methods, transition-metal-catalyzed oxidative Ar-H/Ar-H coupling reactions between two (hetero)arenes have emerged as a concise and effective approach for generating a wide array of bi(hetero)aryl and fused heteroaryl structures. This innovative approach bypasses challenges associated with substrate pre-activation processes, thereby allowing for the creation of frameworks that were previously beyond reach using conventional Ar-X/Ar-M coupling reactions. These inherent advantages have ushered in new design patterns for organic optoelectronic molecules that deviate from traditional methods. This ground-breaking approach enables the transcendence of the limitations of repetitive material structures, ultimately leading to the discovery of novel high-performance materials. In this Perspective, we provide an overview of recent advances in the development of organic optoelectronic materials through the utilization of transition-metal-catalyzed oxidative Ar-H/Ar-H coupling reactions. We introduce several notable synthetic strategies in this domain, covering both directed and non-directed oxidative Ar-H/Ar-H coupling strategies, dual chelation-assisted strategy and directed ortho-C-H arylation/cyclization strategy. Additionally, we shed light on the role of oxidative Ar-H/Ar-H coupling reactions in the advancement of high-performance organic optoelectronic materials. Finally, we discuss the current limitations of existing protocols and offer insights into the future prospects for this field.

Enhanced Gain in Organic Photodetectors Using the Polymer with Singlet Open-Shell Ground State

Photodetectors are critical components in intelligent optoelectronic systems, and photomultiplication-capable devices are essential for detecting weak optical signals. Despite significant advances, developing photomultiplication-type organic photodetectors with high gain and low noise current simultaneously remains challenging. In this work, a new conjugated polymer PDN with singlet open-shell ground state is introduced in active layers for electron capture, and the corresponding PDN-based photodetectors exhibited an enhanced photoelectric gain and decreased dark current density at a low forward bias. At 1.5 V, the PDN-based ternary photodetector has the external quantum efficiency (EQE) up to 2552.3 % and the specific detectivity of 1.4×1014  Jones at 710 nm calculated by the measured noise current, with the gain 22 times higher than that of the control group. This study provides an approach for exploiting polymers with singlet open-shell ground state to enhance the gain of organic photodetectors.

Rational Design of Novel Conjugated Terpolymers Based on Diketopyrrolopyrrole and Their Applications to Organic Thin-Film Transistors

Organic polymer semiconductor materials, due to their good chemical modifiability, can be easily tuned by rational molecular structure design to modulate their material properties, which, in turn, affects the device performance. Here, we designed and synthesized a series of materials based on terpolymer structures and applied them to organic thin-film transistor (OTFT) device applications. The four polymers, obtained by polymerization of three monomers relying on the Stille coupling reaction, shared comparable molecular weights, with the main structural difference being the ratio of the thiazole component to the fluorinated thiophene (Tz/FS). The conjugated polymers exhibited similar energy levels and thermal stability; however, their photochemical and crystalline properties were distinctly different, leading to significantly varied mobility behavior. Materials with a Tz/FS ratio of 50:50 showed the highest electron mobility, up to 0.69 cm2 V-1 s-1. Our investigation reveals the fundamental relationship between the structure and properties of materials and provides a basis for the design of semiconductor materials with higher carrier mobility.

Donor:Acceptor Janus Nanoparticle-Based Films as Photoactive Layers: Control of Assembly and Impact on Performance of Devices

Water-processable organic semiconductor nanoparticles (NPs) are considered promising materials for the next-generation of optoelectronic applications due to their controlled size, internal structure, and environmentally friendly processing. Reasonably, the controllable assembly of donor:acceptor (D:A) NPs on large areas, quality, and packing density of deposited films, as well as layer morphology, will influence the effectiveness of charge transfer at an interface and the final performance of designed optoelectronic devices.This work represents an easy and effective approach for designing self-assembled monolayers of D:A NPs. In this self-assembly procedure, the NP arrays are prepared on a large scale (2 × 2 cm² ) at the air/water interface with controlled packing density and morphology. Due to the unique structure of individual D:A Janus particles and their assembled arrays, the Janus nanoparticle (JNP)-based device exhibits an 80% improvement of electron mobility and more balanced charge extraction compared to the conventional core-shell NP-based device. An outstanding performance of polymer solar cells with over 5% efficiency is achieved after post-annealing treatment of assembled arrays, representing one of the best results for NP-based organic photovoltaics. Ultimately, this work provides a new protocol for processing water-processable organic semiconductor colloids and future optoelectronic fabrication.

Direct observation of conformations of a high-mobility n-type low-bandgap copolymer in solutions and solid films

The aggregation morphologies of conjugated polymers in solutions and solid films are important for their optoelectronic applications. Due to the amorphous state of the polymers, it remains a great challenge to determine their conformations in either liquids or solids. Herein, a ps/fs synchronized 2D IR technique is applied to investigate the molecular conformations of a high-mobility n-type low-bandgap copolymer, N2200, dissolved in CHCl₃ and CCl₄, and in solid films cast from both solutions by the vibrational cross-angle method. In CCl₄, the polymer forms more aggregates and folds more and the backbone dihedral angle of C-C(NDI)/C-S(Thiophene) of its average conformation is about 10° more distorted than that in CHCl₃ and the most stable conformation for a free molecule. Anti-intuitively, the solid films cast from both solutions have the same molecular conformation, and the conformation is similar to that of the polar CHCl₃ rather than the conformation of the less polar CCl₄. The results imply that the interaction between the polymer backbones is probably stronger than its interaction with CCl₄, which can naturally guide the rearrangement of polymer chains during the evaporation of solvent molecules. This work also implies that the balance and competition between the polymer/polymer interaction and the polymer/solvent interaction seem to be the dominant factors responsible for what morphology can form in a solid film cast from solution. It is not always true that different molecular conformations must exist in solid films grown from different solutions with different polarity or different extents of aggregates with different conformations.

Improved Molecular Ordering in a Ternary Blend Enables All-Polymer Solar Cells over 18% Efficiency

Although all-polymer solar cells (all-PSCs) show great commercialization prospects, their power conversion efficiencies (PCEs) still fall behind their small molecule acceptor-based counterparts. In all-polymer blends, the optimized morphology and high molecular ordering are difficult to achieve since there is troublesome competition between the crystallinity of the polymer donor and acceptor during the film-formation process. Therefore, it is challenging to improve the performance of all-PSCs. Herein, a ternary strategy is adopted to modulate the morphology and the molecular crystallinity of an all-polymer blend, in which PM6:PY-82 is selected as the host blend and PY-DT is employed as a guest component. Benefiting from the favorable miscibility of the two acceptors and the higher regularity of PY-DT, the ternary matrix features a well-defined fibrillar morphology and improved molecular ordering. Consequently, the champion PM6:PY-82:PY-DT device produces a record-high PCE of 18.03%, with simultaneously improved open-circuit voltage, short-circuit current and fill factor in comparison with the binary devices. High-performance large-area (1 cm² ) and thick-film (300 nm) all-PSCs are also successfully fabricated with PCEs of 16.35% and 15.70%, respectively.Moreover, 16.5 cm² organic solar module affords an encouraging PCE of 13.84% when using the non-halogenated solvent , showing the great potential of "Lab-to-Fab" transition of all-PSCs.

Terpolymer Donor with Inside Alkyl Substituents on Thiophene π-Bridges toward Thiazolothiazole A2 -Unit Enables 18.21% Efficiency of Polymer Solar Cells

PM6 is a widely used D-A copolymer donor in the polymer solar cells (PSCs). Incorporating second electron-withdrawing (A2 ) units into PM6 backbone by ternary D-A1 -D-A2 random copolymerization strategy is an effective approach to further improve its photovoltaic performance. Here, the authors synthesize the PM6-based terpolymers by introducing thiazolothiazole as the A2 units connecting with thiophene π-bridges attaching alkyl substituent towards the A2 unit (PMT-CT) or towards D-unit (PMT-FT), and study the effect of the alkyl substituent position on the photovoltaic performance of them. Two terpolymers PMT-FT-10 and PMT-CT-10 are obtained by incorporating 10% A2 units in the terpolymers. The film of PMT-CT-10 shows slightly up-shifted highest occupied molecular orbital (HOMO) energy levels while better co-planar structure than that of PMT-FT-10. Meanwhile, the PMT-CT-10:Y6 blend film exhibits better molecular packing properties, more proper phase separation and more balanced hole and electron mobilities, which are beneficial to more efficient exciton dissociation, efficient charge transport and weaker bimolecular recombination. Consequently, the PMT-CT-10 based PSCs obtain the highest power conversion efficiency of 18.21%. The results indicate that side chain position on the thiophene π-bridges influence the device performance of the terpolymer donors, and PMT-CT-10 is a high efficiency polymer donor for the PSCs.

New Benzotriazole and Benzodithiophene-Based Conjugated Terpolymer Bearing a Fluorescein Derivative as Side-Group: In-Ternal Förster Resonance Energy Transfer to Improve Organic Solar Cells

A new benzodithiophene and benzotriazole-based terpolymer bearing a fluorescein derivative as a side group was synthesized and studied for organic solar cell (OSC) applications. This side group was covalently bounded to the backbone through an n-hexyl chain to induce the intramolecular Förster Resonance Energy Transfer (FRET) process and thus improve the photovoltaic performance of the polymeric material. The polymer exhibited good solubility in common organic chlorinated solvents as well as thermal stability (TDT10% > 360 °C). Photophysical measurements demonstrated the occurrence of the FRET phenomenon between the lateral group and the terpolymer. The terpolymer exhibited an absorption band centered at 501 nm, an optical bandgap of 2.02 eV, and HOMO and LUMO energy levels of −5.30 eV and −3.28 eV, respectively. A preliminary study on terpolymer-based OSC devices showed a low power-conversion efficiency (PCE) but a higher performance than devices based on an analogous polymer without the fluorescein derivative. These results mean that the design presented here is a promising strategy to improve the performance of polymers used in OSCs.

Synthesis and Strong Solvatochromism of Push-Pull Thienylthiazole Boron Complexes

The solvatochromic behavior of two donor-π bridge-acceptor (D-π-A) compounds based on the 2-(3-boryl-2-thienyl)thiazole π-linker and indandione acceptor moiety are investigated. DFT/TD-DFT calculations were performed in combination with steady-state absorption and emission measurements, along with electrochemical studies, to elucidate the effect of two different strongly electron-donating hydrazonyl units on the solvatochromic and fluorescence behavior of these compounds. The Lippert–Mataga equation was used to estimate the change in dipole moments (Δµ) between ground and excited states based on the measured spectroscopic properties in solvents of varying polarity with the data being supported by theoretical studies. The two asymmetrical D-π-A molecules feature strong solvatochromic shifts in fluorescence of up to ~4300 cm⁻¹ and a concomitant change of the emission color from yellow to red. These changes were accompanied by an increase in Stokes shift to reach values as large as ~5700–5800 cm⁻¹. Quantum yields of ca. 0.75 could be observed for the N,N-dimethylhydrazonyl derivative in nonpolar solvents, which gradually decreased along with increasing solvent polarity, as opposed to the consistently reduced values obtained for the N,N-diphenylhydrazonyl derivative of up to ca. 0.20 in nonpolar solvents. These two push–pull molecules are contrasted with a structurally similar acceptor-π bridge-acceptor (A-π-A) compound.

Recent Structural Engineering of Polymer Semiconductors Incorporating Hydrogen Bonds

Highly planar, extended π-electron organic conjugated polymers have been increasingly attractive for achieving high-mobility organic semiconductors. In addition to the conventional strategy to construct rigid backbone by covalent bonds, hydrogen bond has been employed extensively to increase the planarity and rigidity of polymer via intramolecular noncovalent interactions. This review provides a general summary of high-mobility semiconducting polymers incorporating hydrogen bonds in field-effect transistors over recent years. The structural engineering of the hydrogen bond-containing building blocks and the discussion of theoretical simulation, microstructural characterization, and device performance are covered. Additionally, the effects of the introduction of hydrogen bond on self-healing, stretchability, chemical sensitivity, and mechanical properties are also discussed. The review aims to help and inspire design of new high-mobility conjugated polymers with superiority of mechanical flexibility by incorporation of hydrogen bond for the application in flexible electronics.

Polymer Acceptors for High-Performance All-Polymer Solar Cells

All-polymer solar cells (all-PSCs) have attracted considerable attention owing to their pronounced advantages of excellent mechanical flexibility/stretchability and greatly enhanced device stability as compared to other types of organic solar cells (OSCs). Thanks to the extensive research efforts dedicated to the development of polymer acceptors, all-PSCs have achieved remarkable improvement of photovoltaic performance, recently. This review summarizes the recent progress of polymer acceptors based on the key electron-deficient building blocks, which include bithiophene imide (BTI) derivatives, boron-nitrogen coordination bond (B←N)-incorporated (hetero)arenes, cyano-functionalized (hetero)arenes, and fused-ring electron acceptors (FREAs). In addition, single-component-based all-PSCs are also briefly discussed. The structure-property correlations of polymer acceptors are elaborated in detail. Finally, we offer our insights into the development of new electron-deficient building blocks with further optimized properties and the polymers built from them for efficient all-PSCs.

Rational Regulation of the Molecular Aggregation Enables A Facile Blade-Coating Process of Large-area All-Polymer Solar Cells with Record Efficiency

Developing robust materials is very critical and faces a big challenge for high-performance large-area all-polymer solar cells (all-PSCs) by printing methods. Herein, the authors combine the advantages of the terpolymerization strategy with the non-conjugated backbone strategy to regulate the molecular aggregation rationally during the film-forming printing process, facilitating a facile printing process for large-area all-PSCs. A series of terpolymer acceptors PYSe-Clx (x = 0, 10, 20, and 30) is also developed, which can effectively fine-tune the morphology and photoelectric properties of the active layer. The PBDB-T: PYSe-Cl20-based all-PSC delivers a significantly improved power cconversion efficiency (PCE) than the one with PBDB-T: PYSe (14.21% vs 12.45%). By addition of a small amount of non-conjugated polymer acceptor PTClo-Y, the ternary all-PSC reaches a PCE of 15.26%. More importantly, the regulation of molecular aggregation enables a facile blade-coating process of the large-area device. A record PCE of 13.81% for large-area devices (1.21 cm² ) is obtained, which is the highest value for large-area all-PSCs fabricated by blade-coating. The environmentally friendly solvent processed large-area device also obtains an excellent performance of 13.21%. This work provides a simple and effective molecular design strategy of robust materials for high-performance large-area all-PSCs by a printing process.

Facilely prepared aggregation-induced emission (AIE) nanocrystals with deep-red emission for super-resolution imaging

Organic nanocrystals (NCs) with high brightness are highly desirable for biological imaging. However, the preparation of NCs by a facile and fast method is still challenging. Herein, an aggregation-induced emission (AIE) luminogen of 4,4'-(5,6-difluorobenzo[c][1,2,5]thiadiazole-4,7-diyl)bis(N,N-bis(4-methoxyphenyl)aniline) (DTPA-BT-F) in the deep-red region is designed with intensive crystalline features to obtain NCs by kinetically controlled nanoprecipitation. The prepared AIE NCs with high brightness and good photo-stability are then applied in super-resolution imaging via stimulated emission depletion (STED) nanoscopy. As observed, the nanostructures in lysosomes of both fixed and live cells are well visualized with superior lateral resolutions under STED nanoscopy (full width at half maximum values, 107 and 108 nm) in contrast to that in confocal imaging (548 and 740 nm). More importantly, dynamic monitoring and long-term tracking of lysosomal movements in live HeLa cells, such as lysosomal contact, can also be carried out by using DTPA-BT-F NCs at a superior resolution. To the best of our knowledge, this is the first case of AIE NCs prepared by nanoprecipitation for STED nanoscopy, thus providing a new strategy to develop high performance imaging agents for super-resolution imaging.

Pathways towards Boosting Solar-Driven Hydrogen Evolution of Conjugated Polymers

Photocatalytic H₂ evolution under solar illumination has been considered to be a promising technology for green energy resources. Developing highly efficient photocatalysts for photocatalytic water splitting is long-term desired but still challenging. Conjugated polymers (CPs) have attracted ongoing attention and have been considered to be promising alternatives for solar-driven H₂ production due to the excellent merits of the large π-conjugated system, versatile structures, tunable photoelectric properties, and well-defined chemical composites. The excellent merits have offered numerous methods for boosting photocatalytic hydrogen evolution (PHE) of initial CP-based photocatalysts, whose apparent quantum yield is dramatically increased from <1 to >20% in recent five years. According to the photocatalytic mechanism, this review herein systematically summarizes three major strategies for boosting photocatalytic H₂ production of CPs: 1) enhancing visible light absorption, 2) suppressing recombination of electron-hole pairs, and 3) boosting surface catalytic reaction, mainly involving eleven methods, that is, copolymerization, modifying cross-linker, constructing a donor-acceptor structure, functionalization, fabricating organic heterojunction, loading cocatalyst, and surface modification. Finally, the perspectives towards the future development of PHE are proposed.

Efficient Intramolecular Charge-Transfer Fluorophores Based on Substituted Triphenylphosphine Donors

Triphenylphosphine (TPP)-based luminescent compounds are rarely investigated because of the low photoluminescence quantum yield (PLQY). Here, we demonstrate that introducing steric hindrance groups to the TPP moiety and separating the orbitals involved in the transition can drastically suppress the non-radiative decay induced by structural distortion of TPP in the excited state. High PLQY up to 0.89 as well as thermally activated delayed fluorescence are observed from the intramolecular charge-transfer (ICT) molecules with substituted TPP donors (sTPPs) in doped films. The red organic light-emitting diodes employing these emitters achieve comparable external quantum efficiencies to the control device containing a classical phosphorescent dye, revealing the great potential of the ICT emitters based on electrochemically stable sTPPs.

Synergistic Engineering of Substituents and Backbones on Donor Polymers: Toward Terpolymer Design of High-Performance Polymer Solar Cells

Design of terpolymers via copolymerization has emerged as a potential strategy for expanding the family of high-performing donor polymers and boosting the photovoltaic performance of non-fullerene polymer solar cells (PSCs). Herein, double-ester-substituted thiophenes and thienothiophenes are incorporated as third building blocks into the donor polymer PBDB-TF, developing two groups of terpolymers with donor-acceptor 1-donor-acceptor 2 (D-A1-D-A2)-type backbones. An optimum 10% concentration of double-ester-substituted thiophene units in PBDB-TF-T10 downshifts the molecular energy and increases the dielectric constant, and delivers proper miscibility and nanostructure in blends with the high-performing acceptor Y6. These characteristics are designed to synergistically enhance the photovoltage, photocurrent, and efficiency of PSCs. The resulting power conversion efficiency (PCE) of 16.4% surpasses the conventional PBDB-TF/Y6 PSCs, and it is among the best-performing PSCs based on PBDB-TF-derived terpolymers. Gratifyingly, PBDB-TF-T10 does not show significant batch-to-batch variation and it retains high PCEs above 16% in a broad range of molecular weights. This work introduces a facile strategy to easily synthesize terpolymers in combination with Y6 for the attainment of high-performing and reproducible non-fullerene PSCs.

Approaching Crystal Structure and High Electron Mobility in Conjugated Polymer Crystals

Conjugated polymers usually form crystallized and amorphous regions in the solid state simultaneously, making it difficult to accurately determine their precise microstructures. The lack of multiscale microstructures of conjugated polymers limits the fundamental understanding of the structure-property relationships in polymer-based optoelectronic devices. Here, crystals of two typical conjugated polymers based on four-fluorinated benzodifurandione-based oligo(p-phenylene vinylene) (F₄ BDOPV) and naphthalenediimide (NDI) motifs, respectively, are obtained by a controlled self-assembly process. The strong diffractivity of the polymer crystals brings an opportunity to determine the crystal structures by combining X-ray techniques and molecular simulations. The precise polymer packing structures are useful as initial models to evaluate the charge transport properties in the ordered and disordered phases. Compared to the spin-coated thin films, the highly oriented polymer chains in crystals endow higher mobilities with a lower hopping energy barrier. Microwire crystal transistors of F₄ BDOPV- and NDI-based polymers exhibit high electron mobilities of up to 5.58 and 2.56 cm²  V^-1  s^-1 , respectively, which are among the highest values in polymer crystals. This work presents a simple method to obtain polymer crystals and their precise microstructures, promoting a deep understanding of molecular packing and charge transport for conjugated polymers.

Nonconjugated Terpolymer Acceptors with Two Different Fused-Ring Electron-Deficient Building Blocks for Efficient All-Polymer Solar Cells

The ternary polymerization strategy of incorporating different donor and acceptor units forming terpolymers as photovoltaic materials has been proven advantageous in improving power conversion efficiencies (PCEs) of polymer solar cells (PSCs). Herein, a series of low band gap nonconjugated terpolymer acceptors based on two different fused-ring electron-deficient building blocks (IDIC16 and ITIC) with adjustable photoelectric properties were developed. As the third component, ITIC building blocks with a larger π-conjugation structure, shorter solubilizing side chains, and red-shifted absorption spectrum were incorporated into an IDIC16-based nonconjugated copolymer acceptor PF1-TS4, which built up the terpolymers with two conjugated building blocks linked by flexible thioalkyl chain-thiophene segments. With the increasing ITIC content, terpolymers show gradually broadened absorption spectra and slightly down-shifted lowest unoccupied molecular orbital levels. The active layer based on terpolymer PF1-TS4-60 with a 60% ITIC unit presents more balanced hole and electron mobilities, higher photoluminescence quenching efficiency, and improved morphology compared to those based on PF1-TS4. In all-polymer solar cells (all-PSCs), PF1-TS4-60, matched with a wide band gap polymer donor PM6, achieved a similar open-circuit voltage (Voc) of 0.99 V, a dramatically increased short-circuit current density (Jsc) of 15.30 mA cm-2, and fill factor (FF) of 61.4% compared to PF1-TS4 (Voc = 0.99 V, Jsc = 11.21 mA cm-2, and FF = 55.6%). As a result, the PF1-TS4-60-based all-PSCs achieved a PCE of 9.31%, which is ∼50% higher than the PF1-TS4-based ones (6.17%). The results demonstrate a promising approach to develop high-performance nonconjugated terpolymer acceptors for efficient all-PSCs by means of ternary polymerization using two different A-D-A-structured fused-ring electron-deficient building blocks.

Electrochemical and Solvent-Mediated Visible-to-Near-Infrared Spectroscopic Switching of Benzoselenadiazole Fluorophores

A series of electronic push-pull, pull-pull, and push fluorophores has been prepared from a benzoselenadiazole core so that their spectroscopic, electrochemical, spectro-electrochemical, and spectro-electrofluorescence properties could be examined. The emission wavelengths and fluorescence quantum yields (Φ_fl ) of the N,N-dimethyl fluorophores were contingent on the solvent polarity and they ranged from 615 to 850 nm in aprotic solvents. The positive solvatochromism and the quenched Φ_fl in polar solvents were consistent with an intramolecular charge-transfer state (ICT). Meanwhile, a locally excited state (LE) was assigned in nonpolar solvents from the blue-shifted emission and high Φ_fl . The N,N-dimethylamine fluorophores examined could be both electrochemically oxidized and reduced, whereas the symmetric dinitro pull-pull derivative could be only reversibly reduced. Courtesy of their electrochemical reversibility, the fluorophores could reversibly change color from yellow to blue with an applied potential in addition to switching off their emission. The absorption of the electrochemically generated intermediates of the N,N-dimethyl derivatives spanned 500 nm over the visible and the NIR regions. The colors could be switched for upwards of two hours with applied potential, illustrating their potential use as electroactive materials in electrochromic devices.

An All-Organic D-A System for Visible-Light-Driven Overall Water Splitting

Direct water splitting over photocatalysts is a prospective strategy to convert solar energy into hydrogen energy. Nevertheless, because of the undesirable electron accumulation at the surface, the overall water-splitting efficiency is seriously restricted by the poor charge separation/transfer ability. Here, an all-organic donor-acceptor (D-A) system through crafting carbon rings units-conjugated tubular graphitic carbon nitride (C-TCN) is proposed. Through a range of characterizations and theoretical calculations, the incorporation of carbon rings units via continuous π-conjugated bond builds a D-A system, which can drive intramolecular charge transfer to realize highly efficient charge separation. More importantly, the tubular structure and the incorporated carbon rings units cause a significant downshift of the valence band, of which the potential is beneficial to the activation for O₂ evolution. When serving as photocatalyst for overall water splitting, C-TCN displays considerable performance with H₂ and O₂ production rates of 204.6 and 100.8 µmol g^-1 h^-1 , respectively. The corresponding external quantum efficiency reaches 2.6% at 405 nm, and still remains 1.7% at 420 nm. This work demonstrates that the all-organic D-A system conceptualized from organic solar cell can offer promotional effect for overall water splitting by addressing the charge accumulation problem rooted in the hydrogen evolution reaction.

Noncovalent Intermolecular Interaction in Cofacially Stacked 24π Antiaromatic Hexaphyrin Dimer

π-π Stacking is omnipresent not only in nature but in a wide variety of practical fields applied to our lives. Because of its importance in a performance of natural and artificial systems, such as light harvesting system and working layer in device, many researchers have put intensive effort into identifying its underlying nature. However, for the case of π-π stacked systems composed of antiaromatic units, the understanding of the fundamental mechanisms is still unclear. Herein, we synthesized a new type of planar β,β'-phenylene-bridged hexaphyrin (1.0.1.0.1.0), referred as naphthorosarin which possesses the 24π-electron conjugated pathway. Especially, the corresponding antiaromatic porphyrinoid shows the unique property to form dimeric species adopting the face-to-face geometry which is unprecedented in cases of known annulated naphthorosarins. In order to elucidate the intriguing properties derived from the stacked dimer, the current study focuses on the experimental support to rationalize the observed π-π interactions between the two subunits.

Donor-Acceptor Conjugated Macrocycles with Polyradical Character and Global Aromaticity

Polyradical character and global aromaticity are fundamental concepts that govern the rational design of cyclic conjugated macromolecules for optoelectronic applications. Here, we report donor-acceptor (D−A) conjugated macromolecules with and without π-spacer derivatives to tune the antiferromagnetic couplings between the unpaired electrons. The macromolecules without π-spacer have a closed-shell electronic configuration and show global nonaromatic character in the singlet and lowest triplet states. However, the derivatives with π-spacer develop a nearly pure open-shell diradical and a very high polyradical character, not reported for D−A type macromolecules. Furthermore, the π-spacer derivatives display global nonaromaticity in the singlet ground state, but global aromaticity in the lowest triplet state, according to Baird's rule. The absorption spectra of the open-shell macromolecules calculated with time-dependent density functional theory indicate intensive light absorption in the near-infrared region and broadening to 2,500 nm, making these materials suitable for numerous optoelectronic applications.

•

Donor-acceptor macromolecules with open-shell polyradical character are reported.

•

The antiferromagnetic coupling between the unpaired electrons is modulated with pi-spacer.

•

The open-shell macrocycles show Baird’s aromaticity in the lowest triplet state.

•

Open-shell macrocycles red-shift absorption spectra.

Random terpolymer based on thiophene-thiazolothiazole unit enabling efficient non-fullerene organic solar cells

Developing a high-performance donor polymer is critical for achieving efficient non-fullerene organic solar cells (OSCs). Currently, most high-efficiency OSCs are based on a donor polymer named PM6, unfortunately, whose performance is highly sensitive to its molecular weight and thus has significant batch-to-batch variations. Here we report a donor polymer (named PM1) based on a random ternary polymerization strategy that enables highly efficient non-fullerene OSCs with efficiencies reaching 17.6%. Importantly, the PM1 polymer exhibits excellent batch-to-batch reproducibility. By including 20% of a weak electron-withdrawing thiophene-thiazolothiazole (TTz) into the PM6 polymer backbone, the resulting polymer (PM1) can maintain the positive effects (such as downshifted energy level and reduced miscibility) while minimize the negative ones (including reduced temperature-dependent aggregation property). With higher performance and greater synthesis reproducibility, the PM1 polymer has the promise to become the work-horse material for the non-fullerene OSC community.

Ordered Solid-State Microstructures of Conjugated Polymers Arising from Solution-State Aggregation

Controlling the solution-state aggregation of conjugated polymers for producing specific microstructures remains challenging. Herein, a practical approach is developed to finely tune the solid-state microstructures through temperature-controlled solution-state aggregation and polymer crystallization. High temperature generates significant conformation fluctuation of conjugated backbones in solution, which facilitates the polymer crystallization from solvated aggregates to orderly packed structures. The polymer films deposited at high temperatures exhibit less structural disorders and higher electron mobilities (up to two orders of magnitude) in field-effect transistors, compared to those deposited at low temperatures. This work provides an effective strategy to tune the solution-state aggregation to reveal the relationship between solution-state aggregation and solid-state microstructures of conjugated polymers.

Synergy of Liquid-Crystalline Small-Molecule and Polymeric Donors Delivers Uncommon Morphology Evolution and 16.6% Efficiency Organic Photovoltaics

Achieving an ideal morphology is an imperative avenue for enhancing key parameters toward high-performing organic solar cells (OSCs). Among a myriad of morphological-control methods, the strategy of incorporating a third component with structural similarity and crystallinity difference to construct ternary OSCs has emerged as an effective approach to regulate morphology. A nematic liquid-crystalline benzodithiophene terthiophene rhodamine (BTR) molecule, which possesses the same alkylthio-thienyl-substituted benzo moiety but obviously stronger crystallinity compared to classical medium-bandgap polymeric donor PM6, is employed as a third component to construct ternary OSCs based on a PM6:BTR:Y6 system. The doping of BTR (5 wt%) is found to be enough to improve the OSC morphology-significantly enhancing the crystallinity of the photoactive layer while slightly reducing the donor/acceptor phase separation scale simultaneously. Rarely is such a morphology evolution reported. It positively affects the electronic properties of the device-prolongs the carrier lifetime, shortens the photocurrent decay time, facilitates exciton dissociation, charge transport, and collection, and ultimately boosts the power conversion efficiency from 15.7% to 16.6%. This result demonstrates that the successful synergy of liquid-crystalline small-molecule and polymeric donors delicately adjusts the active-layer morphology and refines device performance, which brings vibrancy to the OSC research field.

Tuning molecular aggregation to achieve highly bright AIE dots for NIR-II fluorescence imaging and NIR-I photoacoustic imaging

Currently, bright aggregation-induced emission luminogens (AIEgens) with high photoluminescence quantum yields (PLQYs) in the NIR-II region are still limited, and thus an efficient strategy to enhance NIR-II fluorescence performance through tuning molecular aggregation is proposed here. The synthesized donor-acceptor tailored AIEgen (DTPA-TBZ) not only exhibits an excellent absorptivity in the NIR-I region, but also good fluorescence signals in the NIR-II region with an emission extending to 1200 nm. Benefiting from such improved intramolecular restriction and aggregation, a significant absolute PLQY value of 8.98% was obtained in solid DTPA-TBZ. Encouragingly, the resulting AIE dots also exhibit a high relative PLQY of up to 11.1% with IR 26 as the reference (PLQY = 0.5%). Finally, the AIE dots were applied in high performance NIR-II fluorescence imaging and NIR-I photoacoustic (PA) imaging: visualization of abdominal vessels, hind limb vasculature, and cerebral vessels with high signal to background ratios was performed via NIR-II imaging; Moreover, PA imaging has also been performed to clearly observe tumors in vivo. These results demonstrate that by finely tuning molecular aggregation in DTPA-TBZ, a good NIR-I absorptivity and a highly emissive fluorescence in the NIR-II region can be achieved simultaneously, finally resulting in a promising dual-modal imaging platform for real-world applications to achieve precise cancer diagnostics.

Reduced Nonradiative Voltage Loss in Terpolymer Solar Cells

The dissociation of hybrid local exciton and charge transfer excitons (LE-CT) in efficient bulk-heterojunction nonfullerene solar cells contributes to reduced nonradiative photovoltage loss, a mechanism that still remains unclear. Herein we studied the energetic and entropic contribution in the hybrid LE-CT exciton dissociation in devices based on a conjugated terpolymer. Compared with reference devices based on ternary blends, the terpolymer devices demonstrated a significant reduction in the nonradiative photovoltage loss, regardless of the acceptor molecule, be it fullerene or nonfullerene. Fourier transform photocurrent spectroscopy revealed a significant LE-CT character in the terpolymer-based solar cells. Temperature-dependent hole mobility and photovoltage confirm that entropic and energetic effects contribute to the efficient LE-CT dissociation. The energetic disorder value measured in the fullerene- or nonfullerene-based terpolymer devices suggested that this entropic contribution came from the terpolymer, a signature of higher disorder in copolymers with multiple aromatic groups. This gives new insight into the fundamental physics of efficient LE-CT exciton dissociation with smaller nonradiative recombination loss.

Optimized Molecular Packing and Nonradiative Energy Loss Based on Terpolymer Methodology Combining Two Asymmetric Segments for High-Performance Polymer Solar Cells

In this work, a random terpolymer methodology combining two electron-rich units, asymmetric thienobenzodithiophene (TBD) and thieno[2,3-f]benzofuran segments, is systematically investigated. The synergetic effect is embodied on the molecular packing and nanophase when copolymerized with 1,3-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']dithiophene-4,8-dione, producing an impressive power conversion efficiency (PCE) of 14.2% in IT-4F-based NF-PSCs, which outperformed the corresponding D-A copolymers. The balanced aggregation and better interpenetrating network of the TBD50:IT-4F blend film can lead to mixing region exciton splitting and suppress carrier recombination, along with high yields of long-lived carriers. Moreover, the broad applicability of terpolymer methodology is successfully validated in most electron-deficient systems. Especially, the TBD50/Y6-based device exhibits a high PCE of 15.0% with a small energy loss (0.52 eV) enabled by the low nonradiative energy loss (0.22 eV), which are among the best values reported for polymers without using benzodithiophene unit to date. These results demonstrate an outstanding terpolymer approach with backbone engineering to raise the hope of achieving even higher PCEs and to enrich organic photovoltaic materials reservoir.