Porosimetry for Thin Films of Metal-Organic Frameworks: A Comparison of Positron Annihilation Lifetime Spectroscopy and Adsorption-Based Methods

Thermo-temporal physisorption in metal-organic frameworks probed by cyclic thermo-ellipsometry

Temperature-induced sorption in porous materials is a well-known process. What is more challenging is to determine how the rate at which temperature is varied affects these processes. To address this question, we introduce a methodology called "cyclic thermo-ellipsometry" to explore the thermo-kinetics of vapor physisorption in metal-organic framework films.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

Revisiting Metal-Organic Frameworks Porosimetry by Positron Annihilation: Metal Ion States and Positronium Parameters

Metal-organic frameworks (MOFs) stand as pivotal porous materials with exceptional surface areas, adaptability, and versatility. Positron Annihilation Lifetime Spectroscopy (PALS) is an indispensable tool for characterizing MOF porosity, especially micro- and mesopores in both open and closed phases. Notably, PALS offers porosity insights independent of probe molecules, which is vital for detailed characterization without structural transformations. This study explores how metal ion states in MOFs affect PALS results. We find significant differences in measured porosity due to paramagnetic or oxidized metal ions compared to simulated values. By analyzing CPO-27(M) (M = Mg, Co, Ni), with identical pore dimensions, we observe distinct PALS data alterations based on metal ions. Paramagnetic Co and Ni ions hinder and quench positronium (Ps) formation, resulting in smaller measured pore volumes and sizes. Mg only quenches Ps, leading to underestimated pore sizes without volume distortion. This underscores the metal ions' pivotal role in PALS outcomes, urging caution in interpreting MOF porosity.

Recent advances in the interfacial engineering of MOF-based mixed matrix membranes for gas separation

The membrane process stands as a promising and transformative technology for efficient gas separation due to its high energy efficiency, operational simplicity, low environmental impact, and easy up-and-down scaling. Metal-organic framework (MOF)-polymer mixed matrix membranes (MMMs) combine MOFs' superior gas-separation performance with polymers' processing versatility, offering the opportunity to address the limitations of pure polymer or inorganic membranes for large-scale integration. However, the incompatibility between the rigid MOFs and flexible polymer chains poses a challenge in MOF MMM fabrication, which can cause issues such as MOF agglomeration, sedimentation, and interfacial defects, substantially weakening membrane separation efficiency and mechanical properties, particularly gas separation. This review focuses on engineering MMMs' interfaces, detailing recent strategies for reducing interfacial defects, improving MOF dispersion, and enhancing MOF loading. Advanced characterisation techniques for understanding membrane properties, specifically the MOF-polymer interface, are outlined. Lastly, it explores the remaining challenges in MMM research and outlines potential future research directions.

In Situ Exfoliation Growth Strategy Realizing Controlled Synthesis of 3D to 2D MOF Materials as High-Performance Electrochemical Biosensors

Two-dimensional (2D) metal-organic framework (MOF) nanosheets with large surface area, ultrathin thickness, and highly accessible active sites have attracted great research attention. Developing efficient approaches to realize the controllable synthesis of well-defined 2D MOFs with a specific composition and morphology is critical. However, it is still a significant challenge to construct thin and uniform 2D MOF nanosheets and resolve the reagglomeration as well as poor stability of target 2D MOF products. Here, an "in situ exfoliation growth" strategy is proposed, where a one-step synthetic process can realize the successful fabrication of PBA/MIL-53(NiFe)/NF nanosheets on the surface of nickel foam (NF) via in situ conversion and exfoliation growth strategies. The PBA/MIL-53(NiFe)/NF nanosheets combine the individual advantages of MOFs, Prussian blue analogues (PBAs), and 2D materials. As expected, the resulting PBA/MIL-53(NiFe)/NF as a glucose electrode exhibits an extremely high sensitivity of 25.74 mA mM-1 cm-2 in a very wide concentration range of 180 nM to 4.8 μM. The present exciting work provides a simple and effective strategy for the construction of high-performance nonenzymatic glucose electrochemical biosensors.

Beyond the Meso/Macroporous Boundary: Extending Capillary Condensation-Based Pore Size Characterization in Thin Films Through Tailored Adsorptives

The characterization of thin films containing nanopores with diameters exceeding 50 nm poses significant challenges, especially when deploying sorption-based techniques. Conventional volumetric physisorption or mercury intrusion methods have limited applicability in thin films due to constraints in sample preparation and nondestructive testing. In this context, ellipsometric porosimetry represents a viable alternative, leveraging its optical sensitivity to thin films. With existing setups relying on the capillary condensation of volatile compounds such as water, applicability is typically restricted to pore dimensions <50 nm. In this study, we introduce two high-molar-mass hydrocarbon adsorptives, namely ethylbenzene and n-nonane. These adsorptives exhibit substantial potential in improving the accuracy of physisorption measurements beyond mesoporosity (i.e., >50 nm). Specifically, with n-nonane, applicability is extended up to 80 nm pores. Our measurement guidelines propose a nondestructive, expeditious (<60 min), low-pressure (<0.03 bar) approach to investigate nanoporous thin films with potential adaptability to diverse structural architectures.

2D Covalent Organic Framework Membranes for Liquid-Phase Molecular Separations: State of the Field, Common Pitfalls, and Future Opportunities

2D covalent organic frameworks (2D COFs) are attractive candidates for next-generation membranes due to their robust linkages and uniform, tunable pores. Many publications have claimed to achieve selective molecular transport through COF pores, but reported performance metrics for similar networks vary dramatically, and in several cases the reported experiments are inadequate to support such conclusions. These issues require a reevaluation of the literature. Published examples of 2D COF membranes for liquid-phase separations can be broadly divided into two categories, each with common performance characteristics: polycrystalline COF films (most >1 µm thick) and weakly crystalline or amorphous films (most <500 nm thick). Neither category has demonstrated consistent relationships between the designed COF pore structure and separation performance, suggesting that these imperfect materials do not sieve molecules through uniform pores. In this perspective, rigorous practices for evaluating COF membrane structures and separation performance are described, which will facilitate their development toward molecularly precise membranes capable of performing previously unrealized chemical separations. In the absence of this more rigorous standard of proof, reports of COF-based membranes should be treated with skepticism. As methods to control 2D polymerization improve, precise 2D polymer membranes may exhibit exquisite and energy efficient performance relevant for contemporary separation challenges.

Transmission Porosimetry Study on High-quality Zr-fum-MOF Thin Films

Crystalline Zr-fum-MOF (MOF-801) thin films of high quality are prepared on glass and silicon substrates by direct growth under solvothermal conditions. The synthesis is described in detail and the influence of different synthesis parameters such as temperature, precursor concentration, and the substrate type on the quality of the coatings is illustrated. Zr-fum-MOF thin films are characterized in terms of crystallinity, porosity, and homogeneity. Dense films of optical quality are obtained. The sorption behavior of the thin films is studied with various adsorptives. It can be easily monitored by measuring the transmission of the films in gas flows of different compositions. This simple transmission measurement at only one wavelength allows a very fast evaluation of the adsorption properties of thin films as compared to traditional sorption methods. The sorption behavior of the thin films is compared with the sorption properties of Zr-fum-MOF powder samples.

Capture of Volatile Iodine Gas and Identification of Adsorption Sites in the Pore Network of Unsubstituted Imidazole Linker-Incorporated Zeolitic Imidazolate Framework-8

The incorporation of unsubstituted imidazole (Im) in zeolitic imidazolate framework-8 (ZIF-8) crystallized in sodalite topology is proposed to improve gas capture and gas separation performance drastically. However, the incorporation of unsubstituted Im in ZIF-8 has remained challenging due to the thermodynamic instability of zinc and Im bonding in sodalite topology. We have incorporated up to 24.4 (mol %) Im linker in highly crystalline ZIF-8 with similar morphology and sodalite topology using a delayed linker addition strategy at room temperature. Im incorporation brings significant tuning to the pore architecture of ZIF-8, as confirmed by positron annihilation lifetime spectroscopy. The modifications in the pore architecture are primarily due to linker defects produced in the frameworks during crystallization and the elimination of steric hindrance due to the absence of a methyl group on Im. The Im-incorporated ZIF-8 shows significant enhancement in iodine capture as well as higher crystal structure stability under iodine vapor exposure as compared to pristine ZIF-8. Through ortho-positronium interaction with the adsorbed molecular iodine in the pore network of the frameworks, it is confirmed that iodine is preferentially adsorbed at cavity and intercrystalline voids, whereas aperture sites remain unoccupied by iodine molecules.

Investigation of ortho-positronium annihilation for porous materials with different geometries and topologies

In this work, we present the results of the ortho-positronium (o-Ps) annihilation lifetimes and nitrogen adsorption measurements for different porous materials and an approach for describing the annihilation of o-Ps in a pore, which results in a surface-volume formula (SVF) for calculating the pore-related o-Ps lifetime. This proposed formula gives the relationship between the o-Ps annihilation rate and the effective pore radius, bulk composition, and pore structure, including pore geometry and topology. The pore-related o-Ps lifetimes of different materials calculated by the SVF are consistent with experimental results for both micro- and mesopores (and macropores) with different geometries and topologies. The SVF is convenient for calculations of pore dimensions for many cases of metal organic frameworks and zeolites. This approach enables us to fully explain the temperature dependence of the o-Ps annihilation lifetime over a wide temperature range, 20-700 K.

Fine-Tuning of the Pore Aperture and Framework Flexibility of Mixed-Metal (Zn/Co) Zeolitic Imidazolate Framework-8: An In Situ Positron Annihilation Lifetime Spectroscopy Study under CO2 Gas Pressure

The mixed-metal (Zn/Co) strategy has been used to enhance the gas separation selectivity of zeolitic imidazolate framework-8 (ZIF-8)-based membranes. The enhancement in selectivity has been attributed to possible modifications in the grain boundary structure, pore architecture, and flexibility of the frameworks. In the present study, we used in situ positron annihilation lifetime spectroscopy (PALS) under varying CO2 pressure to investigate the tuning of the pore architecture and framework flexibility of mixed-metal (Zn/Co) ZIF-8 frameworks with varying Co contents. The random distribution of Zn and Co metal nodes within the highly crystalline frameworks having an SOD topology was established using electron microscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. The inherent aperture as well as cavity size of the frameworks, and the pore interconnectivity to the outer surface, were observed to vary with the Co content in ZIF-8 due to the random distribution of Zn and Co metal nodes in the frameworks. The aperture size is reduced with the incorporation of an additional metal (Zn or Co) in ZIF-67 or ZIF-8, respectively. The aperture size remains the smallest for a lower Co content (∼0.20) in ZIF-8. The framework flexibility determined by in situ PALS measurements under CO2 pressure continuously reduces with increasing Co content in ZIF-8. A smaller aperture size as well as low flexibility of ZIF-8 with a low Co content is seen to be directly correlated to a higher separation selectivity of membranes prepared with this mixed-metal composition.

Millisecond flash lamp curing for porosity generation in thin films

Flash lamp annealing (FLA) with millisecond pulse durations is reported as a novel curing method for pore precursor's degradation in thin films. A case study on the curing of dielectric thin films is presented. FLA-cured films are being investigated by means of positron annihilation spectroscopy (PAS) and Fourier-transform infrared (FTIR) spectroscopy in order to quantify the nm-scale porosity and post-treatment chemistry, respectively. Results from positron annihilation reveal the onset of the formation of porous voids inside the samples at 6 ms flash treatment time. Moreover, parameter's adjustment (flash duration and energy density) allows for identifying the optimum conditions of effective curing. Within such a systematic investigation, positron results indicate that FLA is able to decompose the porogen (pore precursors) and to generate interconnected (open porosity) or isolated pore networks with self-sealed pores in a controllable way. Furthermore, FTIR results demonstrate the structural evolution after FLA, that help for setting the optimal annealing conditions whereby only a residual amount of porogen remains and at the same time a well-densified matrix, and a hydrophobic porous structures are created. Raman spectroscopy suggests that the curing-induced self-sealing layer developed at the film surface is a graphene oxide-like layer, which could serve as the outside sealing of the pore network from intrusions.

A Novel "Inside-Out" Intraocular Nanomedicine Delivery Mode for Nanomaterials' Biological Effect Enhanced Choroidal Neovascularization Occlusion and Microenvironment Regulation

Photodynamic therapy (PDT) is commonly used in choroidal neovascularization (CNV) treatment due to the superior light transmittance of the eye. However, PDT often leads to surrounding tissue damage and further microenvironmental deterioration, including exacerbated hypoxia, inflammation, and secondary neovascularization. In this work, Pt nanoparticles (NPs) and Au NPs decorated zeolitic imidazolate framework-8 nanoplatform is developed to load indocyanine green for precise PDT and microenvironment amelioration, which can penetrate the internal limiting membrane through Müller cells endocytosis and target to CNV by surface-grafted cyclo(Arg-Gly-Asp-d-Phe-Lys) after intravitreal injection. The excessive H₂ O₂ in the CNV microenvironment is catalyzed by catalase-like Pt NPs for hypoxia relief and enhanced PDT occlusion of neovascular. Meanwhile, Au NPs show significant anti-inflammatory and anti-angiogenesis properties in regulating macrophages and blocking vascular endothelial growth factor (VEGF). Compared with verteporfin treatment, the mRNA expressions of hypoxia-inducible factor-1α and VEGF in the nanoplatform group are downregulated by 90.2% and 81.7%, respectively. Therefore, the nanoplatform realizes a comprehensive CNV treatment effect based on the high drug loading capacity and biosafety. The CNV treatment mode developed in this work provides a valuable reference for treating other diseases with similar physiological barriers that limit drug delivery and similar microenvironment.

Calculations of adsorption-dependent refractive indices of metal-organic frameworks for gas sensing applications

Detection of volatile organic compounds (VOCs) is one of the most challenging tasks in modelling breath analyzers because of their low concentrations (parts-per-billion (ppb) to parts-per-million (ppm)) in breath and the high humidity levels in exhaled breaths. The refractive index is one of the crucial optical properties of metal-organic frameworks (MOFs), which is changeable via the variation of gas species and concentrations that can be utilized as gas detectors. Herein, for the first time, we used Lorentz-Lorentz, Maxwell-Ga, and Bruggeman effective medium approximation (EMA) equations to compute the percentage change in the index of refraction (Δn%) of ZIF-7, ZIF-8, ZIF-90, MIL-101(Cr) and HKUST-1 upon exposure to ethanol at various partial pressures. We also determined the enhancement factors of the mentioned MOFs to assess the storage capability of MOFs and the biosensors' selectivity through guest-host interactions, especially, at low guest concentrations.

Nanoporous Metal-Organic Framework Thin Films Prepared Directly from Gaseous Precursors by Atomic and Molecular Layer Deposition: Implications for Microelectronics

Atomic/molecular layer deposition (ALD/MLD) allows for the direct gas-phase synthesis of crystalline metal-organic framework (MOF) thin films. Here, we show for the first time using krypton and methanol physisorption measurements that ALD/MLD-fabricated copper 1,4-benzenedicarboxylate (Cu-BDC) ultrathin films possess accessible porosity matching that of the corresponding bulk MOF.

Vapor-Phase Loading of an Ionic Liquid into a Zeolitic Imidazolate Framework

Composites formed by a metal-organic framework (MOF) and an ionic liquid (IL) are potentially interesting materials for applications ranging from gas separation to electrochemical devices. Consequently, there is a need for robust and low-cost preparation procedures that are compatible with the desired applications. We herein report a solvent-free, one-step, and vapor-based ship-in-bottle synthesis of the IL@MOF composite 1-butyl-3-methylimidazolium bromide@ZIF-8 in powder and thin film forms. In this approach, volatile IL precursors evaporate and subsequently adsorb and react within the MOF cages to form the IL.

Vapor-Phase Adsorption of Xylene Isomers and Ethylbenzene in MOF-74 Thin Films

Thin films of Co-MOF-74 and Ni-MOF-74 were synthesized on Au-coated quartz crystal microbalance substrates by a vapor-assisted conversion (VAC) method that precludes the need for activation via postsynthetic solvent exchange. All thin films were structurally characterized by powder X-ray diffraction, reflection-absorption infrared spectroscopy, and Raman spectroscopy. Scanning electron microscopy (SEM) images reveal that the Ni-MOF-74 films exists as a dense base layer with hemispherical protrusions on the surface. In contrast, the scanning electron microscopy images of the Co-MOF-74 thin films show a rough surface with spherical deposits. The thin film morphologies were different than the powders resulting from the bulk synthesis. Gravimetric vapor-phase adsorption measurements for xylene isomers and ethylbenzene within Co-MOF-74 and Ni-MOF-74 thin films were conducted, and the results were compared with those reported for the corresponding bulk powders. Despite different morphologies, the saturation capacities of Ni-MOF-74 and Co-MOF-74 thin films were found to be nearly equivalent to those reported for the bulk powders. The results demonstrate that the VAC method can produce MOF-74 thin films that retain the intrinsic properties that are observed in bulk powders.

MIL-101(Cr) MOF as an Effective Siloxane Sensor

Volatile methylsiloxanes (VMSs) are common silicone degradation byproducts that cause serious concern for the contamination of sensitive electronics and optics, among others. With the goal of fast, online detection of VMS, we herein highlight the mesoporous MIL-101(Cr) MOF as a promising mass sensing layer for integration with a quartz crystal microbalance (QCM), using an in-house modified gravimetric adsorption system capable of achieving extremely low concentrations of siloxane D4 (down to 0.04 ppm), targeting applications for monitoring in indoor spaces and spacecraft. Our developed MIL-101(Cr)@QCM sensor achieves near-perfect reversibility with no hysteresis alongside excellent repeatability over cycling and fast response/recovery times under 1 min. We attribute this capability to optimum host/guest interactions as uncovered through molecular simulations.

Vapor-Phase Processing of Metal-Organic Frameworks

ConspectusPorous metal-organic frameworks (MOFs), formed from organic linkers and metal nodes, have attracted intense research attention. Because of their high specific surface areas, uniform and adjustable pore sizes, and versatile physicochemical properties, MOFs have shown disruptive potential in adsorption, catalysis, separation, etc. For many of these applications, MOFs are synthesized solvothermally as bulk powders and subsequently shaped as pellets or extrudates. Other applications, such as membrane separations and (opto)electronics, require the implementation of MOFs as (patterned) thin films. Most thin-film formation methods are adapted from liquid-phase synthesis protocols. Precursor transport and nucleation are difficult to control in these cases, often leading to particle formation in solution. Moreover, the use of solvents gives rise to environmental and safety challenges, incompatibility issues with some substrates, and corrosion issues in the case of dissolved metal salts. In contrast, vapor-phase processing methods have the merits of environmental friendliness, control over thickness and conformality, scalability in production, and high compatibility with other workflows.In this Account, we outline some of our efforts and related studies in the development and application of vapor-phase processing of crystalline MOF materials (MOF-VPP). We first highlight the advances and mechanisms in the vapor-phase deposition of MOFs (MOF-VPD), mainly focusing on the reactions between a linker vapor and a metal-containing precursor layer. The characteristics of the obtained MOFs (thickness, porosity, crystallographic phase, orientation, etc.) and the correlation of these properties with the deposition parameters (precursors, temperatures, humidity, post-treatments, etc.) are discussed. Some in situ characterization methods that contributed to a fundamental understanding of the involved mechanisms are included in the discussion. Second, four vapor-phase postsynthetic functionalization (PSF) methods are summarized: linker exchange, guest loading, linker grafting, and metalation. These approaches eliminate potential solubility issues and enable fast diffusion of reactants and guests as well as a high loading or degree of exchange. Vapor-phase PSF provides a platform to modify the MOF porosity or even introduce new functionalities (e.g., luminescence photoswitching and catalytic activity). Third, since vapor-phase processing methods enable the integration of MOF film deposition into a (micro)fabrication workflow, they facilitate a range of applications with improved performance (low-k dielectrics, sensors, membrane separations, etc.). Finally, we provide a discussion on the limitations, challenges, and further opportunities for MOF-VPP. Through the discussion and analysis of the vapor-phase processing strategies as well as the underlying mechanisms in this Account, we hope to contribute to the development of the controllable synthesis, functionalization, and application of MOFs and related materials.

ResponZIF Structures: Zeolitic Imidazolate Frameworks as Stimuli-Responsive Materials

Zeolitic imidazolate frameworks (ZIFs) have long been recognized as a prominent subset of the metal-organic framework (MOF) family, in part because of their ease of synthesis and good thermal and chemical stability, alongside attractive properties for diverse potential applications. Prototypical ZIFs like ZIF-8 have become embodiments of the significant promise held by porous coordination polymers as next-generation designer materials. At the same time, their intriguing property of experiencing significant structural changes upon the application of external stimuli such as temperature, mechanical pressure, guest adsorption, or electromagnetic fields, among others, has placed this family of MOFs squarely under the umbrella of stimuli-responsive materials. In this review, we provide an overview of the current understanding of the triggered structural and electronic responses observed in ZIFs (linker and bond dynamics, crystalline and amorphous phase changes, luminescence, etc.). We then describe the state-of-the-art experimental and computational methodology capable of shedding light on these complex phenomena, followed by a comprehensive summary of the stimuli-responsive nature of four prototypical ZIFs: ZIF-8, ZIF-7, ZIF-4, and ZIF-zni. We further expose the relevant challenges for the characterization and fundamental understanding of responsive ZIFs, including how to take advantage of their flexible properties for new application avenues.

Effect of different oxide and hybrid precursors on MOF-CVD of ZIF-8 films

Chemical vapor deposition of metal-organic frameworks (MOF-CVD) will facilitate the integration of porous and crystalline coatings in electronic devices. In the two-step MOF-CVD process, a precursor layer is first deposited and subsequently converted to a MOF through exposure to linker vapor. We herein report the impact of different metal oxide and metalcone layers as precursors for zeolitic imidazolate framework ZIF-8 films.