Copper-Based Plasmonic Catalysis: Recent Advances and Future Perspectives

Dual-mode detection for the total antioxidant capability of skincare products based on porous CuS@CdS@Au nanoshells

The antioxidants in skincare products play a crucial role in delaying the aging process of the skin. With the growing variety of cosmetic products, it is essential to develop effective methods for measuring their total antioxidant capability (TAC). This study introduces a novel nanoenyzme, CuS@CdS@Au nanoshells (NSs), characterized by porous morphologies and composite materials, which demonstrate remarkable localized surface plasmon resonance (LSPR) effects, thereby enhancing their photocatalytic and photothermal properties. Under 808 nm laser irradiation, these nano-enzymes exhibited superior catalytic ability for TMB oxidation and temperature increases compared to CuS or CuS @Au NSs. The TMB absorption response and temperature increase showed high sensitivity to antioxidants such as ascorbic acid, glutathione, and ferulic acid, enabling the development of a dual-mode detection strategy for quantifying the TAC in skincare products without the need for complex pretreatments. Furthermore, the temperature response-based detection results proved to be more accurate than those derived from absorption response in recovery experiments. This research not only improves the reliability of antioxidant assessments but also provides a valuable tool for quality control in the skincare industry.

A Ni@C nanowire-enabled photothermal membrane for highly efficient solar-driven interfacial water purification

Ni@C nanowires were in situ grown with about 5 nm nickel particles uniformly distributed along the one-dimensional framework. By assembling into a membrane, Ni@C exhibited 95.7% solar spectral absorption and a high water interfacial evaporation rate of 2.38 kg m-2 h-1 under one sun. Superhydrophobic modification further enabled long-term stable saline water evaporation. This work demonstrates the promising potential of non-precious Ni for solar photothermal conversion applications.

Copper-Nanoparticle-Decorated Hydrothermal Carbonaceous Carbon-Polydimethylsiloxane Nanocomposites: Unveiling Potential in Simultaneous Light-Driven Interfacial Water Evaporation and Power Generation

This study introduces a hydrothermal synthesis method that uses glucose and Cu2+ ions to create a Cu-nanoparticle (NP)-decorated hydrothermal carbonaceous carbon hybrid material (Cu-HTCC). Glucose serves both as a reducing agent, efficiently transforming Cu2+ ions into elemental Cu nanostructures, and as a precursor for HTCC microstructures. An enhanced plasmon-induced electric field resulting from Cu NPs supported on microstructure matrices, coupled with a distinctive localized π-electronic configuration in the hybrid material, as confirmed by X-ray photoelectron spectroscopic analysis, lead to the heightened optical absorption in the visible-near-infrared range. Consequently, flexible nanocomposites of Cu-HTCC/PDMS and Cu-HTCC@PDMS (PDMS = polydimethylsiloxane) are designed as 2 and 3D structures, respectively, that exhibit broad-spectrum solar absorption. These composites promise efficient photo-assisted thermoelectric power generation and water evaporation, demonstrating commendable mechanical stability and flexibility. Notably, the Cu-HTCC@PDMS composite sponge simultaneously exhibits commendable efficiency in both water evaporation (1.47 kg m-2 h-1) and power generation (32.1 mV) under 1 sunlight illumination. These findings unveil new possibilities for innovative photothermal functional materials in diverse solar-driven applications.

Catalytic air oxidation of biogas slurry using Cu sub-nanocluster supported by mesoporous TiZrO4 and protected by SiO2 shell

Biogas slurry, an inevitable outcome of anaerobic digestion (AD), is a treatment burden for urban environmental management. In this study, two kinds of biogas slurry (slurry J and slurry C), collected from the AD plants in Japan and China, were treated using novel TiZrO4 @Cu and TiZrO4 @Cu@SiO2 multilayered hollow spheres containing Cu sub-nanoclusters as the catalyst. The results showed that the chemical oxygen demand (COD) was removed by 63 % for slurry J and 44 % for slurry C after 5 h. The Cu sub-nanoclusters acted as co-catalysts and active centers, facilitating rapid electron transfer to oxygen molecules and forming highly reactive •O2- and •OH species (Use slurry J as the based solution). These free radicals cleaved the interconnecting bonds between benzene rings, disintegrated the ring structure, formed intermediate compounds such as n-hexylic acid, and ultimately mineralized organic pollutants in biogas slurry into CO2 and H2O. At the same time, TiZrO4 @Cu@SiO2 had excellent stability due to the protection of the SiO2 shell and reduced threefold Cu leaching than TiZrO4 @Cu. The COD removal rate was always 60 % in six cycles in the slurry J. The new catalyst ensured the high performance of catalytic air oxidation at low temperatures, which has significant potential as an environmentally friendly and energy-saving method for organic wastewater treatment.

A Plasmonic Optoelectronic Resistive Random-Access Memory for In-Sensor Color Image Cryptography

The optoelectronic resistive random-access memory (RRAM) with the integrated function of perception, storage and intrinsic randomness displays promising applications in the hardware level in-sensor image cryptography. In this work, 2D hexagonal boron nitride based optoelectronic RRAM is fabricated with semitransparent noble metal (Ag or Au) as top electrodes, which can simultaneous capture color image and generate physically unclonable function (PUF) key for in-sensor color image cryptography. Surface plasmons of noble metals enable the strong light absorption to realize an efficient modulation of filament growth at nanoscale. Resistive switching curves show that the optical stimuli can impede the filament aggregation and promote the filament annihilation, which originates from photothermal effects and photogenerated hot electrons in localized surface plasmon resonance of noble metals. By selecting noble metals, the optoelectronic RRAM array can respond to distinct wavelengths and mimic the biological dichromatic cone cells to perform the color perception. Due to the intrinsic and high-quality randomness, the optoelectronic RRAM can produce a PUF key in every exposure cycle, which can be applied in the reconfigurable cryptography. The findings demonstrate an effective strategy to build optoelectronic RRAM for in-sensor color image cryptography applications.

Plasmon-Switched Kinetics for Formic Acid Dehydrogenation: Selective Adsorption Driven by Local Field and Hot Carriers

Understanding illumination-mediated kinetics is essential for catalyst design in plasmon catalysis. Here we prepare Pd-based plasmonic catalysts with tunable electronic structures to reveal the underlying illumination-enhanced kinetic mechanisms for formic acid (HCOOH) dehydrogenation. We demonstrate a kinetic switch from a competitive Langmuir-Hinshelwood adsorption mode in dark to a non-competitive type under irradiation triggered by local field and hot carriers. Specifically, the electromagnetic field induces a spatial-temporal separation of dehydrogenation-favorable configurations of reactant molecule HCOOH and HCOO- due to their natural different polarities. Meanwhile, the generated energetic carriers can serve as active sites for selective molecular adsorption. The hot electrons act as adsorption sites for HCOOH, while holes prefer to adsorb HCOO-. Such unique non-competitive adsorption kinetics induced by plasmon effects serves as another typical characteristic of plasmonic catalysis that remarkably differs from thermocatalysis. This work unravels unique adsorption transformations and a kinetic switching driven by plasmon nonthermal effects.

Size and temperature dependent shapes of copper nanocrystals using parallel tempering molecular dynamics

We performed parallel-tempering molecular dynamics simulations to predict the temperature- and size-dependent equilibrium shapes of a series of Cu nanocrystals in the 100- to 200-atom size range. Our study indicates that temperature-dependent, solid-solid shape transitions occur frequently for Cu nanocrystals in this size range. Complementary calculations with electronic density functional theory indicate that vibrational entropy favors nanocrystals with a shape intermediate between a decahedron and an icosahedron. Overall, we find that entropy plays a significant role in determining the shapes Cu nanocrystals, so studies aimed at determining minimum-energy shapes may fail to correctly predict shapes observed at experimental temperatures. We also observe significant shape changes with nanocrystal size - sometimes with changes in a single atom. The information from this study could be useful in efforts to devise processing routes to achieve selective nanocrystal shapes.

UV-Vis-NIR Broadband Self-Powered CuInS2/SnO2 Photodetectors and the Application in Encrypted Optical Communication

Photodetectors (PDs) with broadband photoresponse can meet the demand for multiband detection in complex environments, overcoming the technological complexity issue of integrated narrow-band PDs. Self-powered heterojunction PDs having ultraviolet-visible-near-infrared broadband photoresponse were constructed by using SnO2 nanopillars and CuInS2 nanoflakes. The dimension, crystalline quality, and energy level structure of the SnO2 nanopillars were regulated by changing the concentration of Sn ions in the precursor solution. The optimized interfacial energy band structure of the heterojunction can increase the transfer ability of the photogenerated carrier. The optimum performance is achieved for the CuInS2/SnO2(0.025M) PD prepared at 0.025 M Sn ion concentration in the precursor solution with the responsivities of 1.15, 6.13, and 1.02 mA/W, and detectivities of 1.19 × 1010, 6.35 × 1010, and 1.02 × 1010 Jones under 254 nm solar-blind ultraviolet light, 475 nm visible light, and 940 nm near-infrared light. Furthermore, a proof-of-concept solar-blind ultraviolet-visible-near-infrared encrypted communication system utilizing a broadband self-powered CuInS2/SnO2 PD as the receiving terminal and solar-blind ultraviolet light, ultraviolet light, visible light, and near-infrared light as the carrier and encryption protocol is proposed. The PD has great potential for applications in the field of encrypted optical communication.

Biomimetic Chiral Nanomaterials with Selective Catalysis Activity

Chiral nanomaterials with unique chiral configurations and biocompatible ligands have been booming over the past decade for their interesting chiroptical effect, unique catalytical activity, and related bioapplications. The catalytic activity and selectivity of chiral nanomaterials have emerged as important topics, that can be potentially controlled and optimized by the rational biochemical design of nanomaterials. In this review, chiral nanomaterials synthesis, composition, and catalytic performances of different biohybrid chiral nanomaterials are discussed. The construction of chiral nanomaterials with multiscale chiral geometries along with the underlying principles for enhancing chiroptical responses are highlighted. Various biochemical approaches to regulate the selectivity and catalytic activity of chiral nanomaterials for biocatalysis are also summarized. Furthermore, attention is paid to specific chiral ligands, materials compositions, structure characteristics, and so on for introducing selective catalytic activities of representative chiral nanomaterials, with emphasis on substrates including small molecules, biological macromolecule, and in-site catalysis in living systems. Promising progress has also been emphasized in chiral nanomaterials featuring structural versatility and improved chiral responses that gave rise to unprecedented chances to utilize light for biocatalytic applications. In summary, the challenges, future trends, and prospects associated with chiral nanomaterials for catalysis are comprehensively proposed.

Highly stable localized surface plasmon resonance of Cu nanoparticles obtained via oxygen plasma irradiation

Copper nanoparticles (CuNPs) possess strong localized surface plasmon resonance (LSPR) in visible light. However, CuNPs are not chemically stable in air, which has seriously hindered the applications based on the LSPR of CuNPs. We developed an artificial method to passivate CuNPs as Al naturally does in air, preventing the oxidation of CuNPs through swift oxidation of the surface atoms via oxygen plasma irradiation. A hemispheric core-shell structure of CuNPs uniformly covered by a dense CuO shell (CuNPs@d-CuO) was constructed. The 4 nm d-CuO shell can prevent CuNPs from further oxidation. As a result, the LSPR of the CuNPs is stable in air over 180 days.

Non-Photochemical Origin of Selectivity Difference between Light and Dark Catalytic Conditions

The interest in introducing light into heterogeneous catalysis is driven not only by the urgent need of replacing fossil energy but also by the promise of controlling product selectivity by light. The product selectivity differences observed in recent studies between light and dark reactions are often attributed to photochemical effects. Here, we report the discovery of a non-photochemical origin of selectivity difference, at essentially the same CO2 conversion rate, between photothermal and thermal CO2 hydrogenation reactions over a Ru/TiO2-x catalyst. While the presence of the photochemical effect from ultraviolet light is confirmed, it merely enhances the catalytic activity. Systematic investigation reveals that the gradual formation of an adsorbate-mediated strong metal-support interaction under catalytic conditions is responsible for the variation in the catalytic selectivity. We demonstrate that differences in product selectivity under light/dark reactions do not necessarily originate from photochemical effects. Our study refines the basis for determining photochemical effects and highlights the importance of excluding non-photochemical effects in mechanistic studies of light-controlled product selectivity.

Donor-Acceptor Conjugated Acetylenic Polymers for High-Performance Bifunctional Photoelectrodes

Due to the drastic required thermodynamical requirements, a photoelectrode material that can function as both a photocathode and a photoanode remains elusive. In this work, we demonstrate for the first time that, under simulated solar light and without co-catalysts, donor-acceptor conjugated acetylenic polymers (CAPs) exhibit both impressive oxygen evolution (OER) and hydrogen evolution (HER) photocurrents in alkaline and neutral medium, respectively. In particular, poly(2,4,6-tris(4-ethynylphenyl)-1,3,5-triazine) (pTET) provides a benchmark OER photocurrent density of ~200 μA cm-2 at 1.23 V vs. reversible hydrogen electrode (RHE) at pH 13 and a remarkable HER photocurrent density of ~190 μA cm-2 at 0.3 V vs. RHE at pH 6.8. By combining theoretical investigations and electrochemical-operando Resonance Raman spectroscopy, we show that the OER proceeds with two different mechanisms, with the electron-depleted triple bonds acting as single-site OER in combination with the C4-C5 atoms of the phenyl rings as dual sites. The HER, instead, occurs via an electron transfer from the tri-acetylenic linkages to the triazine rings, which act as the HER active sites. This work represents a novel application of organic-based materials and contributes to the development of high-performance photoelectrochemical catalysts for the solar fuels' generation.

Enhanced photocatalysis of metal/covalent organic frameworks by plasmonic nanoparticles and homo/hetero-junctions

Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have garnered attention in photocatalysis due to their unique features including extensive surface area, adjustable pores, and the ability to incorporate various functional groups. However, challenges such as limited visible light absorption and rapid electron-hole recombination often hinder their photocatalytic efficiency. Recent developments have introduced plasmonic nanoparticles (NPs) and junctions to enhance the photocatalytic performance of MOFs/COFs. This paper provides a comprehensive review of recent advancements in MOF/COF-based photocatalysts improved by integration of plasmonic NPs and junctions. We begin by examining the utilization of plasmonic NPs, known for absorbing longer-wavelength light compared to typical MOFs/COFs. These NPs exhibit localized surface plasmon resonance (LSPR) when excited, effectively enhancing the photocatalytic performance of MOFs/COFs. Moreover, we discuss the role of homo/hetero-junctions in facilitating charge separation, further boosting the photocatalytic performance of MOFs/COFs. The mechanisms behind the improved photocatalytic performance of these composites are discussed, along with an assessment of challenges and opportunities in the field, guiding future research directions.

Atomic reconstruction for realizing stable solar-driven reversible hydrogen storage of magnesium hydride

Reversible solid-state hydrogen storage of magnesium hydride, traditionally driven by external heating, is constrained by massive energy input and low systematic energy density. Herein, a single phase of Mg2Ni(Cu) alloy is designed via atomic reconstruction to achieve the ideal integration of photothermal and catalytic effects for stable solar-driven hydrogen storage of MgH2. With the intra/inter-band transitions of Mg2Ni(Cu) and its hydrogenated state, over 85% absorption in the entire spectrum is achieved, resulting in the temperature up to 261.8 °C under 2.6 W cm-2. Moreover, the hydrogen storage reaction of Mg2Ni(Cu) is thermodynamically and kinetically favored, and the imbalanced distribution of the light-induced hot electrons within CuNi and Mg2Ni(Cu) facilitates the weakening of Mg-H bonds of MgH2, enhancing the "hydrogen pump" effect of Mg2Ni(Cu)/Mg2Ni(Cu)H4. The reversible generation of Mg2Ni(Cu) upon repeated dehydrogenation process enables the continuous integration of photothermal and catalytic roles stably, ensuring the direct action of localized heat on the catalytic sites without any heat loss, thereby achieving a 6.1 wt.% H2 reversible capacity with 95% retention under 3.5 W cm-2.

Uncovering Photoelectronic and Photothermal Effects in Plasmon-Mediated Electrocatalytic CO2 Reduction

Plasmon-mediated electrocatalysis that rests on the ability of coupling localized surface plasmon resonance (LSPR) and electrochemical activation, emerges as an intriguing and booming area. However, its development seriously suffers from the entanglement between the photoelectronic and photothermal effects induced by the decay of plasmons, especially under the influence of applied potential. Herein, using LSPR-mediated CO2 reduction on Ag electrocatalyst as a model system, we quantitatively uncover the dominant photoelectronic effect on CO2 reduction reaction over a wide potential window, in contrast to the leading photothermal effect on H2 evolution reaction at relatively negative potentials. The excitation of LSPR selectively enhances the CO faradaic efficiency (17-fold at -0.6 VRHE ) and partial current density (100-fold at -0.6 VRHE ), suppressing the undesired H2 faradaic efficiency. Furthermore, in situ attenuated total reflection-surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) reveals a plasmon-promoted formation of the bridge-bonded CO on Ag surface via a carbonyl-containing C1 intermediate. The present work demonstrates a deep mechanistic understanding of selective regulation of interfacial reactions by coupling plasmons and electrochemistry.

Atomic Au3Cu Palisade Interlayer in Core@Shell Nanostructures for Efficient Kirkendall Effect Mediation

Plasmonic Cu@semiconductor heteronanocrystals (HNCs) have many favorable properties, but the synthesis of solid structures is often hindered by the nanoscale Kirkendall effect. Herein, we present the use of an atomically thin Au3Cu palisade interlayer to reduce lattice mismatch and mediate the Kirkendall effect, enabling the successive topological synthesis of Cu@Au3Cu@Ag, Cu@Au3Cu@Ag2S, and further transformed solid Cu@Au3Cu@CdS core-shell HNCs via cation exchange. The atomically thin and intact Au3Cu palisade interlayer effectively modulates the diffusion kinetics of Cu atoms as demonstrated by experimental and theoretical investigations and simultaneously alleviates the lattice mismatch between Cu and Ag as well as Cu and CdS. The Cu@Au3Cu@CdS HNCs feature exceptional crystallinity and atomically organized heterointerfaces between the plasmonic metal and the semiconductor. This results in the efficient plasmon-induced injection of hot electrons from Cu@Au3Cu into the CdS shell, enabling the Cu@Au3Cu@CdS HNCs to achieve high activity and selectivity for the photocatalytic reduction of CO2 to CO.

Enhancing Plasmonic Hot Electron Energy on Ag Surface by Amine Coordination

Plasmonic catalysis has emerged as a promising approach to solar-chemical energy conversion. Notably, hot carriers play a decisive role in plasmonic catalysis since only when their energy matches with the LUMO or HOMO energy of the reactant molecule, can the reaction be activated. However, the hot carrier energy depends on the intrinsic physicochemical properties of the plasmonic metal substrate and the interaction with incident light. Tuning the hot carrier energy is of great significance for plasmonic catalysis but remains challenging. Here, we demonstrate that the energy of hot electrons can be significantly elevated to an unprecedented level through the coordination of amines on Ag surface. The bonding of amines and Ag reduces the work function of nanoparticles, leading to the increase of hot electron energy by 0.4 eV. This enhancement of energy promotes the cleavage of C-X (X=Cl, F) bonds upon excitation by visible light. This study provides new insights for promoting plasmonic charge transfer and enhancing the photocatalytic performance of plasmon-mediated systems.

The plasmonic effect of Cu on tuning CO2 reduction activity and selectivity

Copper (Cu) has been widely used for catalyzing the CO2 reduction reaction (CO2RR), but the plasmonic effect of Cu has rarely been explored for tuning the activity and selectivity of the CO2RR. Herein, we conducted a quantitative analysis on the plasmon-generated photopotential (Ehv) of a Cu nanowire array (NA) photocathode and found that Ehv exclusively reduced the apparent activation energy (Ea) of reducing CO2 to CO without affecting the competitive hydrogen evolution reaction (HER). As a result, the CO production rate was enhanced by 52.6% under plasmon excitation when compared with that under dark conditions. On further incorporation with a polycrystalline Si photovoltaic device, the Cu NA photocathode exhibits good stability in terms of photocurrent and syngas production (CO : H2 = 2 : 1) within 10 h. This work validates the crucial role of the plasmonic effect of Cu on modulating the activity and selectivity of the CO2RR.

Dual-plasmonic Au@Cu7S4 yolk@shell nanocrystals for photocatalytic hydrogen production across visible to near infrared spectral region

Near infrared energy remains untapped toward the maneuvering of entire solar spectrum harvesting for fulfilling the nuts and bolts of solar hydrogen production. We report the use of Au@Cu7S4 yolk@shell nanocrystals as dual-plasmonic photocatalysts to achieve remarkable hydrogen production under visible and near infrared illumination. Ultrafast spectroscopic data reveal the prevalence of long-lived charge separation states for Au@Cu7S4 under both visible and near infrared excitation. Combined with the advantageous features of yolk@shell nanostructures, Au@Cu7S4 achieves a peak quantum yield of 9.4% at 500 nm and a record-breaking quantum yield of 7.3% at 2200 nm for hydrogen production in the absence of additional co-catalysts. The design of a sustainable visible- and near infrared-responsive photocatalytic system is expected to inspire further widespread applications in solar fuel generation. In this work, the feasibility of exploiting the localized surface plasmon resonance property of self-doped, nonstoichiometric semiconductor nanocrystals for the realization of wide-spectrum-driven photocatalysis is highlighted.

Visible-Light-Enhanced Hydrogen Evolution through Anodic Furfural Electro-Oxidation Using Nickel Atomically Dispersed Copper Nanoparticles

A novel copper nanoparticle variant, denoted as Cu98Ni2 NPs, which incorporate Ni atoms in an atomically dispersed manner, has been successfully synthesized via a straightforward one-pot electrochemical codeposition process. These nanoparticles were subsequently employed as an anode to facilitate the oxidation of furfural, leading to the production of hydrogen gas. Voltammetric measurements revealed that the inclusion of trace amounts of Ni atoms in the nanoparticles resulted in a pronounced synergistic electronic effect between Cu and Ni. Consequently, a 43% increase in current density at 0.1 V was observed in comparison to pure Cu NPs. Importantly, when the Cu98Ni2 NPs were irradiated with visible light, a remarkable current density enhancement factor of 505% at 0.1 V was achieved relative to that of pure Cu NPs in the absence of light. This enhancement can be attributed to localized surface plasmon resonance induced by visible light, which triggers photothermal and photoelectric effects. These effects collectively contribute to the significant overall improvement in the electrocatalytic oxidation of furfural, leading to enhanced hydrogen evolution.

Inert gas condensation made bimetallic FeCu nanoparticles – plasmonic response and magnetic ordering

Bimetallic FeCu nanoparticles of narrow size distribution produced by inert gas condensation (IGC) technique exhibit functional plasmonic and magnetic properties and can be considered as a promising system for the development of biosensors.

Molecular Orbital Insights into Plasmon-Induced Methane Photolysis

As a promising way to reduce the temperature for conventional thermolysis, plasmon-induced photocatalysis has been utilized for the dehydrogenation of methane. Here we probe the microscopic dynamic mechanism for plasmon-induced methane dissociation over a tetrahedral Ag20 nanoparticle with molecular orbital insights using time-dependent density functional theory. We ingeniously built the relationship between the chemical bonds and molecular orbitals via Hellmann-Feynman forces. The time- and energy-resolved photocarrier analysis shows that the indirect hot hole transfer from the Ag nanoparticle to methane dominates the photoreaction at low laser intensity, due to the strong hybridization of the Ag nanoparticle and CH4 orbitals, while indirect and direct charge transfer coexist to facilitate methane dissociation in intense laser fields. Our findings can be used to design novel methane photocatalysts and highlight the broad prospects of the molecular orbital approach for adsorbate-substrate systems.

Spectral analysis of oxidation on localized surface plasmon resonance of copper nanoparticles thin film

Copper nanoparticles (CuNPs) possess localized surface plasmon resonance (LSPR) effect. Cu thin films composed of individual CuNPs exhibit stronger LSPR than the individual CuNPs due to the LSPR coupling among CuNPs. However, CuNPs are easy to be oxidized, which results in the rapid LSPR damping of the CuNPs thin films. Simulation of the variations of the coupled LSPR of two adjacent CuNPs with the thickness of oxide shells formed during oxidation is of great importance for understanding the mechanisms of the strong LSPR of CuNPs thin films and its rapid attenuation. In this paper, Discrete-dipole approximation method is used to simulate the extinction spectra of two adjacent spherical CuNPs as a function of the shell thickness (t), the ambient refractive index (n), the diameter (D) of the CuNPs, and the inter-nanoparticle spacing (L). The calculation is validated by experimental results. According to our model, for a definite CuNPs thin films, the oxide shell thickness of CuNPs can be calculated only if the extinction spectra and the morphology are provided. Further, it is found when the oxide shell thickness is small (t/R< 0.3), increasing n and decreasing L/D have an obvious synergistic effect on enhancing the coupled LSPR, but this synergistic effect weakens with the deepening of oxidation, and disappeared when t/R > 0.5. This study provides a calculation method for coupled core-shell nanoparticles and throws light on the role of oxidation on the rapid damped LSPR of CuNPs thin films.

Photo-enhanced dehydrogenation of formic acid on Pd-based hybrid plasmonic nanostructures

Coupling visible light with Pd-based hybrid plasmonic nanostructures has effectively enhanced formic acid (FA) dehydrogenation at room temperature. Unlike conventional heating to achieve higher product yield, the plasmonic effect supplies a unique surface environment through the local electromagnetic field and hot charge carriers, avoiding unfavorable energy consumption and attenuated selectivity. In this minireview, we summarized the latest advances in plasmon-enhanced FA dehydrogenation, including geometry/size-dependent dehydrogenation activities, and further catalytic enhancement by coupling local surface plasmon resonance (LSPR) with Fermi level engineering or alloying effect. Furthermore, some representative cases were taken to interpret the mechanisms of hot charge carriers and the local electromagnetic field on molecular adsorption/activation. Finally, a summary of current limitations and future directions was outlined from the perspectives of mechanism and materials design for the field of plasmon-enhanced FA decomposition.

Photothermal therapy of copper incorporated nanomaterials for biomedicine

Studies have reported on the significance of copper incorporated nanomaterials (CINMs) in cancer theranostics and tissue regeneration. Given their unique physicochemical properties and tunable nanostructures, CINMs are used in photothermal therapy (PTT) and photothermal-derived combination therapies. They have the potential to overcome the challenges of unsatisfactory efficacy of conventional therapies in an efficient and non-invasive manner. This review summarizes the recent advances in CINMs-based PTT in biomedicine. First, the classification and structure of CINMs are introduced. CINMs-based PTT combination therapy in tumors and PTT guided by multiple imaging modalities are then reviewed. Various representative designs of CINMs-based PTT in bone, skin and other organs are presented. Furthermore, the biosafety of CINMs is discussed. Finally, this analysis delves into the current challenges that researchers face and offers an optimistic outlook on the prospects of clinical translational research in this field. This review aims at elucidating on the applications of CINMs-based PTT and derived combination therapies in biomedicine to encourage future design and clinical translation.

Recent advances in copper chalcogenides for CO2 electroreduction

Transforming CO2 through electrochemical methods into useful chemicals and energy sources may contribute to solutions for global energy and ecological challenges. Copper chalcogenides exhibit unique properties that make them potential catalysts for CO2 electroreduction. In this review, we provide an overview and comment on the latest advances made in the synthesis, characterization, and performance of copper chalcogenide materials for CO2 electroreduction, focusing on the work of the last five years. Strategies to boost their performance can be classified in three groups: (1) structural and compositional tuning, (2) leveraging on heterostructures and hybrid materials, and (3) optimizing size and morphology. Despite overall progress, concerns about selectivity and stability persist and require further investigation. This review outlines future directions for developing the next-generation of copper chalcogenide materials, emphasizing on rational design and advanced characterization techniques for efficient and selective CO2 electroreduction.

Simultaneous Catechol and Hydroquinone Detection with Laser Fabricated MOF-Derived Cu-CuO@C Composite Electrochemical Sensor

The conversion of metal-organic frameworks (MOFs) into advanced functional materials offers a promising route for producing unique nanomaterials. MOF-derived systems have the potential to overcome the drawbacks of MOFs, such as low electrical conductivity and poor structural stability, which have hindered their real-world applications in certain cases. In this study, laser scribing was used for pyrolysis of a Cu-based MOF ([Cu4{1,4-C6H4(COO)2}3(4,4'-bipy)2]n) to synthesize a Cu-CuO@C composite on the surface of a screen-printed electrode (SPE). Scanning electron microscopy, X-ray diffractometry, and Energy-dispersive X-ray spectroscopy were used for the investigation of the morphology and composition of the fabricated electrodes. The electrochemical properties of Cu-CuO@C/SPE were studied by cyclic voltammetry and differential pulse voltammetry. The proposed flexible electrochemical Cu-CuO@C/SPE sensor for the simultaneous detection of hydroquinone and catechol exhibited good sensitivity, broad linear range (1-500 μM), and low limits of detection (0.39 μM for HQ and 0.056 μM for CT).

Metallic elements combine with herbal compounds upload in microneedles to promote wound healing: a review

Wound healing is a dynamic and complex restorative process, and traditional dressings reduce their therapeutic effectiveness due to the accumulation of drugs in the cuticle. As a novel drug delivery system, microneedles (MNs) can overcome the defect and deliver drugs to the deeper layers of the skin. As the core of the microneedle system, loaded drugs exert a significant influence on the therapeutic efficacy of MNs. Metallic elements and herbal compounds have been widely used in wound treatment for their ability to accelerate the healing process. Metallic elements primarily serve as antimicrobial agents and facilitate the enhancement of cell proliferation. Whereas various herbal compounds act on different targets in the inflammatory, proliferative, and remodeling phases of wound healing. The interaction between the two drugs forms nanoparticles (NPs) and metal-organic frameworks (MOFs), reducing the toxicity of the metallic elements and increasing the therapeutic effect. This article summarizes recent trends in the development of MNs made of metallic elements and herbal compounds for wound healing, describes their advantages in wound treatment, and provides a reference for the development of future MNs.

Au@C/Pt core@shell/satellite supra-nanostructures: plasmonic antenna-reactor hybrid nanocatalysts

Integration of plasmonic nanoantennas with catalytically active reactors in deliberately designed hybrid supra-nanostructures creates a dual-functional materials platform, based upon which precise modulation of catalytic reaction kinetics becomes accomplishable through optical excitations of plasmon resonances. Here, we have developed a multistep synthetic approach that enables us to assemble colloidal Au@C/Pt core@shell/satellite supra-nanostructures, in which the Au core functions as a light-harvesting plasmonic nanoantenna, the Pt satellites act as catalytically active reactors, and the C shell serves as a nanoscale dielectric spacer separating the reactors from the antenna, respectively. By adjusting several synthetic parameters, the size of the Au core, the thickness of the C shell, and the surface coverage of Pt satellites can all be tuned independently. Choosing Pt-catalyzed cascade oxidation of 3,3',5,5'-tetramethylbenzidine in an aerobic aqueous environment as a model reaction, we have systematically studied the detailed kinetic features of the catalytic reactions both in the dark and under visible light illumination over a broad range of reaction conditions, which sheds light on the interplay between plasmonic and catalytic effects in these antenna-reactor nanohybrids. The plasmonic antenna effect can be effectively harnessed to kinetically modulate multiple crucial steps during the cascade reactions, benefiting from plasmon-enhanced interband electronic transitions in the Pt satellites and plasmon-enhanced intramolecular electronic excitations in chromogenic intermediate species. In addition to the plasmonic antenna effect, photothermal transduction derived from plasmonic excitations can also provide significant contributions to the kinetic enhancements under visible light illumination. The knowledge gained from this work serves as important guiding principles for rational design and structural optimization of plasmonic antenna-reactor hybrid nanomaterials, endowing us with enhanced capabilities to kinetically modulate targeted catalytic/photocatalytic molecule-transforming processes through light illumination.

Recent Advances in Real-Time Time-Dependent Density Functional Theory Simulations of Plasmonic Nanostructures and Plasmonic Photocatalysis

Plasmonic catalysis provides a possible means for driving chemical reactions under relatively mild conditions. Rational design of these systems is impeded by the difficulty in understanding the electron dynamics and their interplay with reactions. Real-time, time-dependent density functional theory (RT-TDDFT) can provide dynamic information on excited states in plasmonic systems, including those relevant to plasmonic catalysis, at time scales and length scales that are otherwise out of reach of many experimental techniques. Here, we discuss previous RT-TDDFT studies of plasmonic systems, focusing on recent work that gains insight into plasmonic catalysis. These studies provide insight into plasmon dynamics, including size effects and the role of specific electronic states. Further, these studies provide significant insight into mechanisms underlying plasmonic catalysis, showing the importance of charge transfer between metal and adsorbate states, as well as local field enhancement, in different systems.

Promises of Plasmonic Antenna-Reactor Systems in Gas-Phase CO2 Photocatalysis

Sunlight-driven photocatalytic CO2 reduction provides intriguing opportunities for addressing the energy and environmental crises faced by humans. The rational combination of plasmonic antennas and active transition metal-based catalysts, known as "antenna-reactor" (AR) nanostructures, allows the simultaneous optimization of optical and catalytic performances of photocatalysts, and thus holds great promise for CO2 photocatalysis. Such design combines the favorable absorption, radiative, and photochemical properties of the plasmonic components with the great catalytic potentials and conductivities of the reactor components. In this review, recent developments of photocatalysts based on plasmonic AR systems for various gas-phase CO2 reduction reactions with emphasis on the electronic structure of plasmonic and catalytic metals, plasmon-driven catalytic pathways, and the role of AR complex in photocatalytic processes are summarized. Perspectives in terms of challenges and future research in this area are also highlighted.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

Matched Ligands for Small, Stable Colloidal Nanoparticles of Copper, Cuprous Oxide and Cuprous Sulfide

This work applies organometallic routes to copper(0/I) nanoparticles and describes how to match ligand chemistries with different material compositions. The syntheses involve reacting an organo-copper precursor, mesitylcopper(I) [CuMes]z (z=4, 5), at low temperatures and in organic solvents, with hydrogen, air or hydrogen sulfide to deliver Cu, Cu2 O or Cu2 S nanoparticles. Use of sub-stoichiometric quantities of protonated ligand (pro-ligand; 0.1-0.2 equivalents vs. [CuMes]z ) allows saturation of surface coordination sites but avoids excess pro-ligand contaminating the nanoparticle solutions. The pro-ligands are nonanoic acid (HO2 CR1 ), 2-[2-(2-methoxyethoxy)ethoxy]acetic acid (HO2 CR2 ) or di(thio)nonanoic acid, (HS2 CR1 ), and are matched to the metallic, oxide or sulfide nanoparticles. Ligand exchange reactions reveal that copper(0) nanoparticles may be coordinated by carboxylate or di(thio)carboxylate ligands, but Cu2 O is preferentially coordinated by carboxylate ligands and Cu2 S by di(thio)carboxylate ligands. This work highlights the opportunities for organometallic routes to well-defined nanoparticles and the need for appropriate ligand selection.

Molecular Thin Films Enable the Synthesis and Screening of Nanoparticle Megalibraries Containing Millions of Catalysts

Megalibraries are centimeter-scale chips containing millions of materials synthesized in parallel using scanning probe lithography. As such, they stand to accelerate how materials are discovered for applications spanning catalysis, optics, and more. However, a long-standing challenge is the availability of substrates compatible with megalibrary synthesis, which limits the structural and functional design space that can be explored. To address this challenge, thermally removable polystyrene films were developed as universal substrate coatings that decouple lithography-enabled nanoparticle synthesis from the underlying substrate chemistry, thus providing consistent lithography parameters on diverse substrates. Multi-spray inking of the scanning probe arrays with polymer solutions containing metal salts allows patterning of >56 million nanoreactors designed to vary in composition and size. These are subsequently converted to inorganic nanoparticles via reductive thermal annealing, which also removes the polystyrene to deposit the megalibrary. Megalibraries with mono-, bi-, and trimetallic materials were synthesized, and nanoparticle size was controlled between 5 and 35 nm by modulating the lithography speed. Importantly, the polystyrene coating can be used on conventional substrates like Si/SiO_x, as well as substrates typically more difficult to pattern on, such as glassy carbon, diamond, TiO_2, BN, W, or SiC. Finally, high-throughput materials discovery is performed in the context of photocatalytic degradation of organic pollutants using Au-Pd-Cu nanoparticle megalibraries on TiO₂ substrates with 2,250,000 unique composition/size combinations. The megalibrary was screened within 1 h by developing fluorescent thin-film coatings on top of the megalibrary as proxies for catalytic turnover, revealing Au_0.53Pd_0.38Cu_0.09-TiO₂ as the most active photocatalyst composition.

Copper-Zinc Bimetallic Single-Atom Catalysts with Localized Surface Plasmon Resonance-Enhanced Photothermal Effect and Catalytic Activity for Melanoma Treatment and Wound-Healing

Nanomaterials with photothermal combined chemodynamic therapy (PTT-CDT) have attracted the attention of researchers owing to their excellent synergistic therapeutic effects on tumors. Thus, the preparation of multifunctional materials with higher photothermal conversion efficiency and catalytic activity can achieve better synergistic therapeutic effects for melanoma. In this study, a Cu-Zn bimetallic single-atom (Cu/PMCS) is constructed with augmented photothermal effect and catalytic activity due to the localized surface plasmon resonance (LSPR) effect. Density functional theory calculations confirmed that the enhanced photothermal effect of Cu/PMCS is due to the appearance of a new d-orbital transition with strong spin-orbit coupling and the induced LSPR. Additionally, Cu/PMCS exhibited increased catalytic activity in the Fenton-like reaction and glutathione depletion capacity, further enhanced by increased temperature and LSPR. Consequently, Cu/PMCS induced better synergistic anti-melanoma effects via PTT-CDT than PMCS in vitro and in vivo. Furthermore, compared with PMCS, Cu/PMCS killed bacteria more quickly and effectively, thus facilitating wound healing owing to the enhanced photothermal effect and slow release of Cu2+ . Cu/PMCS promoted cell migration and angiogenesis and upregulated the expression of related genes to accelerate wound healing. Cu/PMCS has potential applications in treating melanoma and repairing wounds with its antitumor, antibacterial, and wound-healing properties.

Cu-based high-entropy two-dimensional oxide as stable and active photothermal catalyst

Cu-based nanocatalysts are the cornerstone of various industrial catalytic processes. Synergistically strengthening the catalytic stability and activity of Cu-based nanocatalysts is an ongoing challenge. Herein, the high-entropy principle is applied to modify the structure of Cu-based nanocatalysts, and a PVP templated method is invented for generally synthesizing six-eleven dissimilar elements as high-entropy two-dimensional (2D) materials. Taking 2D Cu₂Zn₁Al_0.5Ce₅Zr_0.5O_x as an example, the high-entropy structure not only enhances the sintering resistance from 400 °C to 800 °C but also improves its CO₂ hydrogenation activity to a pure CO production rate of 417.2 mmol g^-1 h^-1 at 500 °C, 4 times higher than that of reported advanced catalysts. When 2D Cu₂Zn₁Al_0.5Ce₅Zr_0.5O_x are applied to the photothermal CO₂ hydrogenation, it exhibits a record photochemical energy conversion efficiency of 36.2%, with a CO generation rate of 248.5 mmol g^-1 h^-1 and 571 L of CO yield under ambient sunlight irradiation. The high-entropy 2D materials provide a new route to simultaneously achieve catalytic stability and activity, greatly expanding the application boundaries of photothermal catalysis.

Molecular dynamics study of plasmon-mediated chemical transformations

Heterogeneous catalysis of adsorbates on metallic surfaces mediated by plasmons has potential high photoelectric conversion efficiency and controllable reaction selectivity. Theoretical modeling of dynamical reaction processes enables in-depth analyses complementing experimental investigations. Especially for plasmon-mediated chemical transformations, light absorption, photoelectric conversion, electron-electron scattering, and electron-phonon coupling occur simultaneously on different timescales, making it very challenging to delineate the complex interplay of different factors. In this work, a trajectory surface hopping non-adiabatic molecular dynamics method is used to investigate the dynamics of plasmon excitation in an Au₂₀-CO system, including hot carrier generation, plasmon energy relaxation, and CO activation induced by electron-vibration coupling. The electronic properties indicate that when Au₂₀-CO is excited, a partial charge transfer takes place from Au₂₀ to CO. On the other hand, dynamical simulations show that hot carriers generated after plasmon excitation transfer back and forth between Au₂₀ and CO. Meanwhile, the C-O stretching mode is activated due to non-adiabatic couplings. The efficiency of plasmon-mediated transformations (∼40%) is obtained based on the ensemble average of these quantities. Our simulations provide important dynamical and atomistic insights into plasmon-mediated chemical transformations from the perspective of non-adiabatic simulations.

Alloying of Cu with Ru Enabling the Relay Catalysis for Reduction of Nitrate to Ammonia

Involving eight electron transfer process and multiple intermediates of nitrate (NO₃ ^- ) reduction reaction leads to a sluggish kinetic and low Faradaic efficiency, therefore, it is essential to get an insight into the reaction mechanism to develop highly efficient electrocatalyst. Herein, a series of reduced-graphene-oxide-supported RuCu alloy catalysts (Ru_x Cu_x /rGO) are fabricated and used for the direct reduction of NO₃ ^- to NH₃ . It is found that the Ru₁ Cu₁₀ /rGO shows the ammonia formation rate of 0.38 mmol cm^-2 h^-1 (loading 1 mg cm^-2 ) and the ammonia Faradaic efficiency of 98% under an ultralow potential of -0.05 V versus Reversible Hydrogen Electode (RHE), which is comparable to Ru catalyst. The highly efficient activity of Ru₁ Cu₁₀ /rGO can be attributed to the synergetic effect between Ru and Cu sites via a relay catalysis, in which the Cu shows the exclusively efficient activity for the reduction of NO₃ ^- to NO₂ ^- and Ru exhibits the superior activity for NO₂ ^- to NH₃ . In addition, the doping of Ru into Cu tunes the d-band center of alloy and effectively modulates the adsorption energy of the NO₃ ^- and NO₂ ^- , which promotes the direct reduction of NO₃ ^- to NH₃ . This synergetic electrocatalysis strategy opens a new avenue for developing highly efficient multifunctional catalysts.

Photoelectrocatalytic oxidation of ethylene glycol on trimetallic PdAgCu nanospheres enhanced by surface plasmon resonance

The notable surface plasmon resonance (SPR) effect of some metals has been applied to improve the efficiency of alcohol oxidation reactions, whereas the comprehensive investigation of Cu-assisted photoelectrocatalysis remains challenging. We herein successfully prepared trimetallic PdAgCu nanospheres (NSs) with abundant surface bulges for the advanced ethylene glycol oxidation reaction (EGOR) and compared them with bimetallic PdAg NSs to investigate the performance enhancement mechanism. Impressively, the as-optimized PdAgCu NSs exhibited superb mass activity and electrochemical stability. Moreover, under visible light illumination, the mass activity of PdAgCu NSs increased to 1.62 times compared to that in the dark, and in contrast, the mass activity of PdAg NSs only increased to 1.48 times that in the dark. A mechanistic study indicated that the incorporation of Cu not only strengthens the whole SPR effect of PdAgCu NSs but also further modifies the electronic structure of Pd. This work highlighted that the incorporation of Cu into PdAg NSs further enhanced the photoelectrocatalytic performance and increased noble metal atom utilization, which may provide guidance to fabricate novel and promising nanocatalysts in the field of photoelectrocatalysis.

Ligand-Mediated Control of the Surface Oxidation States of Copper Nanoparticles Produced by Laser Ablation

We report on studies that demonstrate how the chemical composition of the surface of copper nanoparticles (CuNPs) - in terms of percentage copper(I/II) oxides - can be varied by the presence of N-donor ligands during their formation via laser ablation. Changing the chemical composition thus allows systematic tuning of the surface plasmon resonance (SPR) transition. The trialed ligands include pyridines, tetrazoles, and alkylated tetrazoles. CuNPs formed in the presence of pyridines, and alkylated tetrazoles exhibit a SPR transition only slightly blue shifted with respect to CuNPs formed in the absence of any ligand. On the other hand, the presence of tetrazoles results in CuNPs characterized by a significant blue shift of the order of 50-70 nm. By comparing these data also with the SPR of CuNPs formed in the presence of carboxylic acids and hydrazine, this work demonstrates that the blue shift in the SPR is due to tetrazolate anions providing a reducing environment to the nascent CuNPs, thus preventing the formation of copper(II) oxides. This conclusion is further supported by the fact that both AFM and TEM data indicate only small variations in the size of the nanoparticles, which is not enough to justify a 50-70 nm blue-shift of the SPR transition. High-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) studies further confirm the absence of Cu(II)-containing CuNPs when prepared in the presence of tetrazolate anions.

Theory of Anisotropic Metal Nanostructures

A significant challenge in the development of functional materials is understanding the growth and transformations of anisotropic colloidal metal nanocrystals. Theory and simulations can aid in the development and understanding of anisotropic nanocrystal syntheses. The focus of this review is on how results from first-principles calculations and classical techniques, such as Monte Carlo and molecular dynamics simulations, have been integrated into multiscale theoretical predictions useful in understanding shape-selective nanocrystal syntheses. Also, examples are discussed in which machine learning has been useful in this field. There are many areas at the frontier in condensed matter theory and simulation that are or could be beneficial in this area and these prospects for future progress are discussed.

Plasmonic Cu Nanoparticles for the Low-temperature Photo-driven Water-gas Shift Reaction

The activation of water molecules in thermal catalysis typically requires high temperatures, representing an obstacle to catalyst development for the low-temperature water-gas shift reaction (WGSR). Plasmonic photocatalysis allows activation of water at low temperatures through the generation of light-induced hot electrons. Herein, we report a layered double hydroxide-derived copper catalyst (LD-Cu) with outstanding performance for the low-temperature photo-driven WGSR. LD-Cu offered a lower activation energy for WGSR to H₂ under UV/Vis irradiation (1.4 W cm^-2 ) compared to under dark conditions. Detailed experimental studies revealed that highly dispersed Cu nanoparticles created an abundance of hot electrons during light absorption, which promoted *H₂ O dissociation and *H combination via a carboxyl pathway, leading to the efficient production of H₂ . Results demonstrate the benefits of exploiting plasmonic phenomena in the development of photo-driven low-temperature WGSR catalysts.

Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic nanostructures have shown immense potential in photocatalysis because of their distinct photochemical properties associated with tunable photoresponses and strong light-matter interactions. The introduction of highly active sites is essential to fully exploit the potential of plasmonic nanostructures in photocatalysis, considering the inferior intrinsic activities of typical plasmonic metals. This review focuses on active site-engineered plasmonic nanostructures with enhanced photocatalytic performance, wherein the active sites are classified into four types (i.e., metallic sites, defect sites, ligand-grafted sites, and interface sites). The synergy between active sites and plasmonic nanostructures in photocatalysis is discussed in detail after briefly introducing the material synthesis and characterization methods. Active sites can promote the coupling of solar energy harvested by plasmonic metal to catalytic reactions in the form of local electromagnetic fields, hot carriers, and photothermal heating. Moreover, efficient energy coupling potentially regulates the reaction pathway by facilitating the excited state formation of reactants, changing the status of active sites, and creating additional active sites using photoexcited plasmonic metals. Afterward, the application of active site-engineered plasmonic nanostructures in emerging photocatalytic reactions is summarized. Finally, a summary and perspective of the existing challenges and future opportunities are presented. This review aims to deliver some insights into plasmonic photocatalysis from the perspective of active sites, expediting the discovery of high-performance plasmonic photocatalysts.

Recent advances on catalysts for photocatalytic selective hydrogenation of nitrobenzene to aniline

Selective hydrogenation of nitrobenzene (SHN) is an important approach to synthesize aniline, an essential intermediate with extremely high research significance and value in the fields of textiles, pharmaceuticals and dyes. SHN reaction requires high temperature and high hydrogen pressure via the conventional thermal-driven catalytic process. On the contrary, photocatalysis provides an avenue to achieve high nitrobenzene conversion and high selectivity towards aniline at room temperature and low hydrogen pressure, which is in line with the sustainable development strategies. Designing efficient photocatalysts is a crucial step in SHN. Up to now, several photocatalysts have been explored for photocatalytic SHN, such as TiO2, CdS, Cu/graphene and Eosin Y. In this review, we divide the photocatalysts into three categories based on the characteristics of the light harvesting units, including semiconductors, plasmonic metal-based catalysts and dyes. The recent progress of the three categories of photocatalysts is summarized, the challenges and opportunities are pointed out and the future development prospects are described. It aims to give a clear picture to the catalysis community and stimulate more efforts in this research area.

Plasmonic Photocatalysis for CO2 Reduction: Advances, Understanding and Possibilities

Plasmonic photocatalysis for CO₂ reduction is attracting increasing attention due to appealing properties and great potential for real applications. In this review, the fundamentals of plasmonic photocatalysis and the most recent developments regarding its application in driving CO₂ reduction are reported. Firstly, we present the review on the mechanism of plasmonic photocatalytic CO₂ reduction, the energy transfer of plasmon, and the CO₂ reduction process on the catalyst surface. Then, the modulation on the plasmonic nanostructures and also the semiconductor counterpart to regulate CO₂ photoreduction is discussed. Next, the influence of the core-shell structure and the interface between the plasmonic metal and semiconductor on the CO₂ photoreduction performance is also outlined. In addition, the latest progress on the emerging direction regarding the plasmonic photocatalysis for methane dry reforming with CO₂ is especially emphasized. Finally, a summary on the challenges and prospects of this promising field are provided.

Plasmonic Au-Cu nanostructures: Synthesis and applications

Plasmonic Au-Cu nanostructures composed of Au and Cu metals, have demonstrated advantages over their monolithic counterparts, which have recently attracted considerable attention. Au-Cu nanostructures are currently used in various research fields, including catalysis, light harvesting, optoelectronics, and biotechnologies. Herein, recent developments in Au-Cu nanostructures are summarized. The development of three types of Au-Cu nanostructures is reviewed, including alloys, core-shell structures, and Janus structures. Afterwards, we discuss the peculiar plasmonic properties of Au-Cu nanostructures as well as their potential applications. The excellent properties of Au-Cu nanostructures enable applications in catalysis, plasmon-enhanced spectroscopy, photothermal conversion and therapy. Lastly, we present our thoughts on the current status and future prospects of the Au-Cu nanostructures research field. This review is intended to contribute to the development of fabrication strategies and applications relating to Au-Cu nanostructures.

Solar-Driven Reversible Hydrogen Storage

The lack of safe and efficient hydrogen storage is a major bottleneck for large-scale application of hydrogen energy. Reversible hydrogen storage of light-weight metal hydrides with high theoretical gravimetric and volumetric hydrogen density is one ideal solution but requires extremely high operating temperature with large energy input. Herein, taking MgH₂ as an example, a concept is demonstrated to achieve solar-driven reversible hydrogen storage of metal hydrides via coupling the photothermal effect and catalytic role of Cu nanoparticles uniformly distributed on the surface of MXene nanosheets (Cu@MXene). The photothermal effect of Cu@MXene, coupled with the "heat isolator" role of MgH₂ indued by its poor thermal conductivity, effectively elevates the temperature of MgH₂ upon solar irradiation. The "hydrogen pump" effect of Ti and TiH_x species that are in situ formed on the surface of MXene from the reduction of MgH₂ , on the other hand, plays a catalytic role in effectively alleviating the kinetic barrier and hence decreasing the operating temperature required for reversible hydrogen adsorption and desorption of MgH₂ . Based on the combination of photothermal and catalytic effect of Cu@MXene, a reversible hydrogen storage capacity of 5.9 wt% is achieved for MgH₂ after 30 cycles using solar irradiation as the only energy source.

Plasmonic Nanozymes: Leveraging Localized Surface Plasmon Resonance to Boost the Enzyme-Mimicking Activity of Nanomaterials

Nanozymes, a type of nanomaterials that function similarly to natural enzymes, receive extensive attention in biomedical fields. However, the widespread applications of nanozymes are greatly plagued by their unsatisfactory enzyme-mimicking activity. Localized surface plasmon resonance (LSPR), a nanoscale physical phenomenon described as the collective oscillation of surface free electrons in plasmonic nanoparticles under light irradiation, offers a robust universal paradigm to boost the catalytic performance of nanozymes. Plasmonic nanozymes (PNzymes) with elevated enzyme-mimicking activity by leveraging LSPR, emerge and provide unprecedented opportunities for biocatalysis. In this review, the physical mechanisms behind PNzymes are thoroughly revealed including near-field enhancement, hot carriers, and the photothermal effect. The rational design and applications of PNzymes in biosensing, cancer therapy, and bacterial infections elimination are systematically introduced. Current challenges and further perspectives of PNzymes are also summarized and discussed to stimulate their clinical translation. It is hoped that this review can attract more researchers to further advance the promising field of PNzymes and open up a new avenue for optimizing the enzyme-mimicking activity of nanozymes to create superior nanocatalysts for biomedical applications.

Three-dimensional plasmonic nanoclusters driven by co-assembly of thermo-plasmonic nanoparticles and colloidal quantum dots

Metallic nanoparticles that support localized surface plasmons have emerged as fundamental iconic building blocks for nanoscale photonics. Self-assembled clustering of plasmonic nanoparticles with controlled near-field interactions offers an interesting novel route to manipulate the electromagnetic fields at a subwavelength scale. Various bottom-up, self-assembly manners have been successfully devised to build plasmonic nanoparticle clusters displaying attractive optical properties. However, the incapability to configure on-demand architectures limits its practical reliability uses for scalable nanophotonic devices. Furthermore, a critical challenge has been addressing the accurate positioning of functional nanoparticles, including catalytic nanoparticles, dielectric nanoparticles, and quantum dots (QDs) in the clustered plasmonic hotspots. This work proposes a micropipette-based self-assembly method to fabricate three-dimensional architectures composed of colloidal clusters. The heterogeneous colloidal clusters comprising metallic nanoparticles and QDs are fabricated in one step by the micropipette-based self-assembly method. A plasmonic clustered pillar embedding QDs exhibited excellent photoluminescence characteristics compared to a collapsed pillar. The experimental and theoretical demonstration of the localized surface plasmon resonance and thermo-plasmonic properties of the colloidal clusters was performed.