Effects of the Catalyst Dynamic Changes and Influence of the Reaction Environment on the Performance of Electrochemical CO2 Reduction

Understanding and Tuning the Effects of H2O on Catalytic CO and CO2 Hydrogenation

Catalytic COx (CO and CO2) hydrogenation to valued chemicals is one of the promising approaches to address challenges in energy, environment, and climate change. H2O is an inevitable side product in these reactions, where its existence and effect are often ignored. In fact, H2O significantly influences the catalytic active centers, reaction mechanism, and catalytic performance, preventing us from a definitive and deep understanding on the structure-performance relationship of the authentic catalysts. It is necessary, although challenging, to clarify its effect and provide practical strategies to tune the concentration and distribution of H2O to optimize its influence. In this review, we focus on how H2O in COx hydrogenation induces the structural evolution of catalysts and assists in the catalytic processes, as well as efforts to understand the underlying mechanism. We summarize and discuss some representative tuning strategies for realizing the rapid removal or local enrichment of H2O around the catalysts, along with brief techno-economic analysis and life cycle assessment. These fundamental understandings and strategies are further extended to the reactions of CO and CO2 reduction under an external field (light, electricity, and plasma). We also present suggestions and prospects for deciphering and controlling the effect of H2O in practical applications.

Strong effect-correlated electrochemical CO2 reduction

Electrochemical CO2 reduction (ECR) holds great potential to alleviate the greenhouse effect and our dependence on fossil fuels by integrating renewable energy for the electrosynthesis of high-value fuels from CO2. However, the high thermodynamic energy barrier, sluggish reaction kinetics, inadequate CO2 conversion rate, poor selectivity for the target product, and rapid electrocatalyst degradation severely limit its further industrial-scale application. Although numerous strategies have been proposed to enhance ECR performances from various perspectives, scattered studies fail to comprehensively elucidate the underlying effect-performance relationships toward ECR. Thus, this review presents a comparative summary and a deep discussion with respect to the effects strongly-correlated with ECR, including intrinsic effects of materials caused by various sizes, shapes, compositions, defects, interfaces, and ligands; structure-induced effects derived from diverse confinements, strains, and fields; electrolyte effects introduced by different solutes, solvents, cations, and anions; and environment effects induced by distinct ionomers, pressures, temperatures, gas impurities, and flow rates, with an emphasis on elaborating how these effects shape ECR electrocatalytic activities and selectivity and the underlying mechanisms. In addition, the challenges and prospects behind different effects resulting from various factors are suggested to inspire more attention towards high-throughput theoretical calculations and in situ/operando techniques to unlock the essence of enhanced ECR performance and realize its ultimate application.

Cobalt-Doped Bismuth Nanosheet Catalyst for Enhanced Electrochemical CO2 Reduction to Electrolyte-Free Formic Acid

Electrochemical carbon dioxide (CO2) reduction reaction (CO2RR) to valuable liquid fuels, such as formic acid/formate (HCOOH/HCOO-) is a promising strategy for carbon neutrality. Enhancing CO2RR activity while retaining high selectivity is critical for commercialization. To address this, we developed metal-doped bismuth (Bi) nanosheets via a facile hydrolysis method. These doped nanosheets efficiently generated high-purity HCOOH using a porous solid electrolyte (PSE) layer. Among the evaluated metal-doped Bi catalysts, Co-doped Bi demonstrated improved CO2RR performance compared to pristine Bi, achieving ~90 % HCOO- selectivity and boosted activity with a low overpotential of ~1.0 V at a current density of 200 mA cm-2. In a solid electrolyte reactor, Co-doped Bi maintained HCOOH Faradaic efficiency of ~72 % after a 100-hour operation under a current density of 100 mA cm-2, generating 0.1 M HCOOH at 3.2 V. Density functional theory (DFT) results revealed that Co-doped Bi required a lower applied potential for HCOOH generation from CO2, due to stronger binding energy to the key intermediates OCHO* compared to pure Bi. This study shows that metal doping in Bi nanosheets modifies the chemical composition, element distribution, and morphology, improving CO2RR catalytic activity performance by tuning surface adsorption affinity and reactivity.

Toward Durable CO2 Electroreduction with Cu-Based Catalysts via Understanding Their Deactivation Modes

The technology of CO2 electrochemical reduction (CO2ER) provides a means to convert CO2, a waste greenhouse gas, into value-added chemicals. Copper is the most studied element that is capable of catalyzing CO2ER to obtain multicarbon products, such as ethylene, ethanol, acetate, etc., at an appreciable rate. Under the operating condition of CO2ER, the catalytic performance of Cu decays because of several factors that alters the surface properties of Cu. In this review, these factors that cause the degradation of Cu-based CO2ER catalysts are categorized into generalized deactivation modes, that are applicable to all electrocatalytic systems. The fundamental principles of each deactivation mode and the associated effects of each on Cu-based catalysts are discussed in detail. Structure- and composition-activity relationship developed from recent in situ/operando characterization studies are presented as evidence of related deactivation modes in operation. With the aim to address these deactivation modes, catalyst design and reaction environment engineering rationales are suggested. Finally, perspectives and remarks built upon the recent advances in CO2ER are provided in attempts to improve the durability of CO2ER catalysts.

Boosting the Electroreduction of CO2 to CO by Ligand Engineering of Gold Nanoclusters

The electrochemical CO2 reduction reaction (CO2RR) has been widely studied as a promising means to convert anthropogenic CO2 into valuable chemicals and fuels. In this process, the alkali metal ions present in the electrolyte are known to significantly influence the CO2RR activity and selectivity. In this study, we report a strategy for preparing efficient electrocatalysts by introducing a cation-relaying ligand, namely 6-mercaptohexanoic acid (MHA), into atom-precise Au25 nanoclusters (NCs). The CO2RR activity of the synthesized Au25(MHA)18 NCs was compared with that of Au25(HT)18 NCs (HT=1-hexanethiolate). While both NCs selectively produced CO over H2, the CO2-to-CO conversion activity of the Au25(MHA)18 NCs was significantly higher than that of the Au25(HT)18 NCs when the catholyte pH was higher than the pKa of MHA, demonstrating the cation-relaying effect of the anionic terminal group. Mechanistic investigations into the CO2RR occurring on the Au25 NCs in the presence of different catholyte cations and concentrations revealed that the CO2-to-CO conversion activities of these Au25 NCs increased in the order Li+ Collapse

Key Words

• CO2 reduction reaction (CO2RR)
• gold
• ligand engineering
• nanocluster

Collapse

MESH Headings Collapse

Grants

• National Research Foundation of Korea (NRF) grants (no. NRF-2022R1A2C3003610) Ministry of Science and ICT, South Korea
• Carbon-to-X Project (Project no. 2020M3H7A1096388) Ministry of Science and ICT, South Korea
• Post Doc. Researcher Supporting Program (project no.: 2024-12-0026) Yonsei University

Collapse

Affiliation(s)

Sang Myeong Han Department of Chemistry, Yonsei University, Seoul, 03722, Republic of Korea
Minyoung Park Department of Chemistry, Yonsei University, Seoul, 03722, Republic of Korea
Jiyoung Kim Department of Chemistry, Yonsei University, Seoul, 03722, Republic of Korea
Dongil Lee Department of Chemistry, Yonsei University, Seoul, 03722, Republic of Korea

Collapse

Selective and stable CO2 electroreduction at high rates via control of local H2O/CO2 ratio

Controlling the concentrations of H2O and CO2 at the reaction interface is crucial for achieving efficient electrochemical CO2 reduction. However, precise control of these variables during catalysis remains challenging, and the underlying mechanisms are not fully understood. Herein, guided by a multi-physics model, we demonstrate that tuning the local H2O/CO2 concentrations is achievable by thin polymer coatings on the catalyst surface. Beyond the often-explored hydrophobicity, polymer properties of gas permeability and water-uptake ability are even more critical for this purpose. With these insights, we achieve CO2 reduction on copper with Faradaic efficiency exceeding 87% towards multi-carbon products at a high current density of -2 A cm-2. Encouraging cathodic energy efficiency (>50%) is also observed at this high current density due to the substantially reduced cathodic potential. Additionally, we demonstrate stable CO2 reduction for over 150 h at practically relevant current densities owning to the robust reaction interface. Moreover, this strategy has been extended to membrane electrode assemblies and other catalysts for CO2 reduction. Our findings underscore the significance of fine-tuning the local H2O/CO2 balance for future CO2 reduction applications.

Hierarchically Ordered Pore Engineering of Metal-Organic Framework-Based Materials for Electrocatalysis

Ordered pore engineering that embeds uniform pores with periodic alignment in electrocatalysts opens up a new avenue for achieving further performance promotion. Hierarchically ordered porous metal-organic frameworks (HOP-MOFs) possessing multilevel pores with ordered distribution are the promising precursors for the exploration of ordered porous electrocatalysts, while the scalable acquisition of HOP-MOFs with editable components and adjustable pore size regimes is critical. This review presents recent progress on hierarchically ordered pore engineering of MOF-based materials for enhanced electrocatalysis. The synthetic strategies of HOP-MOFs with different pore size regimes, including the self-assembly guided by reticular chemistry, surfactant, nanoemulsion, and nanocasting, are first introduced. Then the applications of HOP-MOFs as the precursors for exploring hierarchically ordered porous electrocatalysts are summarized, selecting representatives to highlight the boosted performance. Especially, the intensification of molecule and ion transport integrated with optimized electron transfer and site exposure over the hierarchically ordered porous derivatives are emphasized to clarify the directional transfer and integration effect endowed by ordered pore engineering. Finally, the remaining scientific challenges and an outlook of this field are proposed. It is hoped that this review will guide the hierarchically ordered pore engineering of nanocatalysts for boosting the catalytic performance and promoting the practical applications.

Reaction Environment Regulation for Electrocatalytic CO2 Reduction in Acids

The electrocatalytic CO2 reduction reaction (CO2RR) is a sustainable route for converting CO2 into value-added fuels and feedstocks, advancing a carbon-neutral economy. The electrolyte critically influences CO2 utilization, reaction rate and product selectivity. While typically conducted in neutral/alkaline aqueous electrolytes, the CO2RR faces challenges due to (bi)carbonate formation and its crossover to the anolyte, reducing efficiency and stability. Acidic media offer promise by suppressing these processes, but the low Faradaic efficiency, especially for multicarbon (C2+) products, and poor electrocatalyst stability persist. The effective regulation of the reaction environment at the cathode is essential to favor the CO2RR over the competitive hydrogen evolution reaction (HER) and improve long-term stability. This review examines progress in the acidic CO2RR, focusing on reaction environment regulation strategies such as electrocatalyst design, electrode modification and electrolyte engineering to promote the CO2RR. Insights into the reaction mechanisms via in situ/operando techniques and theoretical calculations are discussed, along with critical challenges and future directions in acidic CO2RR technology, offering guidance for developing practical systems for the carbon-neutral community.

Recent advances in dynamic reconstruction of electrocatalysts for carbon dioxide reduction

Electrocatalysts undergo structural evolution under operating electrochemical CO2 reduction reaction (CO2RR) conditions. This dynamic reconstruction correlates with variations in CO2RR activity, selectivity, and stability, posing challenges in catalyst design for electrochemical CO2RR. Despite increased research on the reconstruction behavior of CO2RR electrocatalysts, a comprehensive understanding of their dynamic structural evolution under reaction conditions is lacking. This review summarizes recent developments in the dynamic reconstruction of catalysts during the CO2RR process, covering fundamental principles, modulation strategies, and in situ/operando characterizations. It aims to enhance understanding of electrocatalyst dynamic reconstruction, offering guidelines for the rational design of CO2RR electrocatalysts.

Superlative Porous Organic Polymers for Photochemical and Electrochemical CO2 Reduction Applications: From Synthesis to Functionality

To mimic the carbon cycle at a kinetically rapid pace, the sustainable conversion of omnipresent CO2 to value-added chemical feedstock and hydrocarbon fuels implies a remarkable prototype for utilizing released CO2. Porous organic polymers (POPs) have been recognized as remarkable catalytic systems for achieving large-scale applicability in energy-driven processes. POPs offer mesoporous characteristics, higher surface area, and superior optoelectronic properties that lead to their relatively advanced activity and selectivity for CO2 conversion. In comparison to the metal organic frameworks, POPs exhibit an enhanced tendency toward membrane formation, which governs their excellent stability with regard to remarkable ultrathinness and tailored pore channels. The structural ascendancy of POPs can be effectively utilized to develop cost-effective catalytic supports for energy conversion processes to leapfrog over conventional noble metal catalysts that have nonlinear techno-economic equilibrium. Herein, we precisely surveyed the functionality of POPs from scratch, classified it, and provided a critical commentary of its current methodological advancements and photo/electrochemical achievements in the CO2 reduction reaction.

Addressing the Carbonate Issue: Electrocatalysts for Acidic CO2 Reduction Reaction

Electrochemical CO2 reduction reaction (CO2RR) powered by renewable energy provides a promising route to CO2 conversion and utilization. However, the widely used neutral/alkaline electrolyte consumes a large amount of CO2 to produce (bi)carbonate byproducts, leading to significant challenges at the device level, thereby impeding the further deployment of this reaction. Conducting CO2RR in acidic electrolytes offers a promising solution to address the "carbonate issue"; however, it presents inherent difficulties due to the competitive hydrogen evolution reaction, necessitating concerted efforts toward advanced catalyst and electrode designs to achieve high selectivity and activity. This review encompasses recent developments of acidic CO2RR, from mechanism elucidation to catalyst design and device engineering. This review begins by discussing the mechanistic understanding of the reaction pathway, laying the foundation for catalyst design in acidic CO2RR. Subsequently, an in-depth analysis of recent advancements in acidic CO2RR catalysts is provided, highlighting heterogeneous catalysts, surface immobilized molecular catalysts, and catalyst surface enhancement. Furthermore, the progress made in device-level applications is summarized, aiming to develop high-performance acidic CO2RR systems. Finally, the existing challenges and future directions in the design of acidic CO2RR catalysts are outlined, emphasizing the need for improved selectivity, activity, stability, and scalability.

Enzyme-Inspired Ligand Engineering of Gold Nanoclusters for Electrocatalytic Microenvironment Manipulation

Natural enzymes intricately regulate substrate accessibility through specific amino acid sequences and folded structures at their active sites. Achieving such precise control over the microenvironment has proven to be challenging in nanocatalysis, especially in the realm of ligand-stabilized metal nanoparticles. Here, we use atomically precise metal nanoclusters (NCs) as model catalysts to demonstrate an effective ligand engineering strategy to control the local concentration of CO2 on the surface of gold (Au) NCs during electrocatalytic CO2 reduction reactions (CO2RR). The precise incorporation of two 2-thiouracil-5-carboxylic acid (TCA) ligands within the pocket-like cavity of [Au25(pMBA)18]- NCs (pMBA = para-mercaptobenzoic acid) leads to a substantial acceleration in the reaction kinetics of CO2RR. This enhancement is attributed to a more favorable microenvironment in proximity to the active site for CO2, facilitated by supramolecular interactions between the nucleophilic Nδ- of the pyrimidine ring of the TCA ligand and the electrophilic Cδ+ of CO2. A comprehensive investigation employing absorption spectroscopy, mass spectrometry, isotopic labeling measurements, electrochemical analyses, and quantum chemical computation highlights the pivotal role of local CO2 enrichment in enhancing the activity and selectivity of TCA-modified Au25 NCs for CO2RR. Notably, a high Faradaic efficiency of 98.6% toward CO has been achieved. The surface engineering approach and catalytic fundamentals elucidated in this study provide a systematic foundation for the molecular-level design of metal-based electrocatalysts.

Theoretically Designed Cu10Sn3-Cu-SnOx as Three-Component Electrocatalyst for Efficient and Tunable CO2 Reduction to Syngas

Electrocatalytic transformation of CO2 to various syngas compositions is an exceedingly attractive approach to carbon-neutral recycling. Meanwhile, the achievement of selectivity, stability, and tunability of product ratios using single-component electrocatalysts is challenging. Herein, the theoretically-assisted design of the triple-component nanocomposite electrocatalyst Cu10Sn3-Cu-SnOx that addresses this challenge is presented. It is shown that Cu10Sn3 is a valuable electrocatalyst for suitable CO2 reduction to CO, SnO2 for CO2 reduction to formate at large overpotentials, and that the Cu-SnO2 interface facilitates H2 evolution. Accordingly, the interaction between the three functional components affords tunable CO/H2 ratios, from 1:2 to 2:1, of the produced syngas by controlling the applied potentials and relative contents of functional components. The syngas generation is selective (Faradaic efficiency, FE = 100%) at relatively lower cathodic potentials, whereas formate is the only liquid product detected at relatively higher cathodic potentials. The theoretically guided design approach therefore provides a new opportunity to boost the selectivity and stability of CO2 reduction to tunable syngas.

A temperature-adjustable in situ infrared diffuse reflectance spectroscopy system for catalysts

We introduce an innovative in situ infrared diffuse reflection rapid detection system, endowed with a temperature regulation function. This system is adept at conducting rapid infrared spectra scanning as well as simulating the catalytic environment of diverse reaction systems. The infrared absorption spectra of four kinds of Pt-based catalysts under vacuum conditions across a wide temperature spectrum ranging from -180 to 300 °C are obtained and analysed through IR correlation spectroscopy. A key finding is the notable variance in peak intensity within Pt/CeO2/CNT catalysts, highlighting a robust adsorption capacity for oxygen-containing groups at lower temperatures and a marked desorption at higher temperatures. By enabling rapid and accurate assessments of catalyst behavior under varying temperatures, it not only accelerates the evaluation process but also provides valuable insights that can guide the synthesis of more efficient catalysts.

Introduction of a Conductive Layer into Flood-Resistant Gas Diffusion Electrodes with Polymer Substrate for an Efficient Electrochemical CO2 Reduction with Copper Oxide

Conversion of atmospheric carbon dioxide (CO2) into valuable feedstocks is a crucial technology, and electrochemical reduction of CO2 is a promising approach that can provide a useful source of ethylene (C2H4). Gas diffusion electrodes (GDEs) placed at the interface of the CO2 gas and electrolyte can achieve high current density through a sufficient supply of dissolved CO2 to the reaction site, making them indispensable in industrial applications. However, conventional GDEs with carbon substrate have suffered from electrolyte flooding and consequent loss of efficiency, posing an obstacle for practical application. While flood-resistant GDEs with hydrophobic polymer substrate have been proposed recently, only conductive materials can be employed as electrocatalysts because of their insulative properties, despite the high activities of oxide materials such as copper oxide. Here, we introduce an aluminum conductive layer in GDE with polymer substrate to enable the use of electrically resistive catalysts. Cuprous oxide (Cu2O) with silver particles was tested as a model material and has shown prolonged stability (>17 h) with high C2H4 Faraday efficiency (>50%) while suppressing flooding. A thorough characterization revealed that the conductive layer makes Cu2O an efficient electrocatalyst, even on the polymer substrate, by providing sufficient electrons through its conduction path. This research significantly expands the scope of electrode design by enabling the incorporation of a wide range of nonelectrically conductive materials on GDEs with polymer substrate.

A prediction model for CO2/CO adsorption performance on binary alloys based on machine learning

Despite the rapid development of computational methods, including density functional theory (DFT), predicting the performance of a catalytic material merely based on its atomic arrangements remains challenging. Although quantum mechanics-based methods can model 'real' materials with dopants, grain boundaries, and interfaces with acceptable accuracy, the high demand for computational resources no longer meets the needs of modern scientific research. On the other hand, Machine Learning (ML) method can accelerate the screening of alloy-based catalytic materials. In this study, an ML model was developed to predict the CO2 and CO adsorption affinity on single-atom doped binary alloys based on the thermochemical properties of component metals. By using a greedy algorithm, the best combination of features was determined, and the ML model was trained and verified based on a data set containing 78 alloys on which the adsorption energy values of CO2 and CO were calculated from DFT. Comparison between predicted and DFT calculated adsorption energy values suggests that the extreme gradient boosting (XGBoost) algorithm has excellent generalization performance, and the R-squared (R2) for CO2 and CO adsorption energy prediction are 0.96 and 0.91, respectively. The errors of predicted adsorption energy are 0.138 eV and 0.075 eV for CO2 and CO, respectively. This model can be expected to advance our understanding of structure-property relationships at the fundamental level and be used in large-scale screening of alloy-based catalysts.

Backbone Engineering of Polymeric Catalysts for High-Performance CO2 Reduction in Bipolar Membrane Zero-Gap Electrolyzer

Bipolar membranes (BPMs) have emerged as a promising solution for mitigating CO2 losses, salt precipitation and high maintenance costs associated with the commonly used anion-exchange membrane electrode assembly for CO2 reduction reaction (CO2RR). However, the industrial implementation of BPM-based zero-gap electrolyzer is hampered by the poor CO2RR performance, largely attributed to the local acidic environment. Here, we report a backbone engineering strategy to improve the CO2RR performance of molecular catalysts in BPM-based zero-gap electrolyzers by covalently grafting cobalt tetraaminophthalocyanine onto a positively charged polyfluorene backbone (PF-CoTAPc). PF-CoTAPc shows a high acid tolerance in BPM electrode assembly (BPMEA), achieving a high FE of 82.6 % for CO at 100 mA/cm2 and a high CO2 utilization efficiency of 87.8 %. Notably, the CO2RR selectivity, carbon utilization efficiency and long-term stability of PF-CoTAPc in BPMEA outperform reported BPM systems. We attribute the enhancement to the stable cationic shield in the double layer and suppression of proton migration, ultimately inhibiting the undesired hydrogen evolution and improving the CO2RR selectivity. Techno-economic analysis shows the least energy consumption (957 kJ/mol) for the PF-CoTAPc catalyst in BPMEA. Our findings provide a viable strategy for designing efficient CO2RR catalysts in acidic environments.

Enhancing Cu-ligand interaction for efficient CO2 reduction towards multi-carbon products

Electrochemical CO2 reduction (CO2R) to valuable products provides a promising strategy to enable CO2 utilization sustainably. Here, we report the strategy of using Cu-DAT (3,5-diamino-1,2,4-triazole) as a catalyst precursor for efficient CO2 reduction, demonstrating over 80% selectivity towards multicarbon products at 400 mA cm-2, with intrinsic activity over 19 times higher than that of Cu nanoparticles. The catalyst's active phase is determined to be metallic copper wrapped with the DAT ligand. We attribute this enhanced CO2R performance to the accelerated steps of *CO adsorption and C-C coupling induced by the closely cooperated DAT ligand.

Study of CuSb bimetallic flow-through gas diffusion electrodes for efficient electrochemical CO2 reduction to CO

Electrochemical CO2 reduction (eCO2R) to industrially important feedstock has received great attention, but it faces different challenges. Among them, the poor CO2 mass transport due to low intrinsic CO2 solubility significantly limits the rate of reduction reactions, leading to lower catalytic performance; thereby, commercially relevant current densities can't be achieved. Moreover, the poor activity and selectivity of high-cost monometallic catalysts, including Cu, Zn, Ag, and Au, undermine the efficiency of eCO2R. Flow-through gas diffusion electrodes (FTGDE), a newly developed class of GDEs, can potentially solve the issue of poor CO2 mass transport because they directly feed the CO2 to the catalyst layer. In addition, abundant surface area, porous structure, and improved triple-phase interface make them an excellent candidate for extremely high rate eCO2R. Antimony, a low-cost and abundant metalloid, can be effectively tuned with Cu to produce useful products such as CO, formate, and C2H4 through eCO2R. Herein, a series of porous binary CuSb FTGDEs with different Sb compositions are fabricated for the electrocatalytic reduction of CO2 to CO. The results show that the catalytic performance of CuSb FTGDEs improved with increasing Sb content up to a certain threshold, beyond which it started to decrease. The CuSb FTGDE with 5.4 g of antimony demonstrated higher current density (206.4 mA/cm2) and faradaic efficiency (72.82 %) at relatively lower overpotentials. Compared to gas diffusion configuration, the poor catalytic activity and selectivity achieved by CuSb FTGDE in non-gas diffusion configuration signifies the importance of improved local CO2 concentration and improved triple-phase interface formation in GDE configuration. The several hours stable operation of CuSb FTGDEs during eCO2R demonstrates its potential for efficient electrocatalytic conversion applications.

Hydrogen Spillover Accelerates Electrocatalytic Semi-hydrogenation of Acetylene in Membrane Electrode Assembly Reactor

Electrocatalytic acetylene semi-hydrogenation (EASH) offers a promising and environmentally friendly pathway for the production of C2H4, a widely used petrochemical feedstock. While the economic feasibility of this route has been demonstrated in three-electrode systems, its viability in practical device remains unverified. In this study, we designed a highly efficient electrocatalyst based on a PdCu alloy system utilizing the hydrogen spillover mechanism. The catalyst achieved an operational current density of 600 mA cm-2 in a zero-gap membrane electrode assembly (MEA) reactor, with the C2H4 selectivity exceeding 85%. This data confirms the economic feasibility of EASH in real-world applications. Furthermore, through in situ Raman spectroscopy and theoretical calculations, we elucidated the catalytic mechanism involving interfacial hydrogen spillover. Our findings underscore the economic viability and potential of EASH as a greener and scalable approach for C2H4 production, thus advancing the field of electrocatalysis in sustainable chemical synthesis.

Dynamic in situ Formation of Cu2 O Sub-Nanoclusters through Photoinduced pseudo-Fehling's Reaction for Selective and Efficient Nitrate-to-Ammonia Photosynthesis

Copper (Cu) is evidenced to be effective for constructing advanced catalysts. In particular, Cu2 O is identified to be active for general catalytic reactions. However, conflicting results regarding the true structure-activity correlations between Cu2 O-based active sites and efficiencies are usually reported. The structure of Cu2 O undergoes dynamic evolution rather than remaining stable under working conditions, in which the actual reaction cannot proceed over the prefabricated Cu2 O sites. Therefore, the dynamic construction of Cu2 O active sites can be developed to promote catalytic efficiency and reveal the true structure-activity correlations. Herein, by introducing the redox pairs of Cu2+ and reducing sugar into a photocatalysis system, it is clarified that the Cu2 O sub-nanoclusters (NCs), working as novel active sites, are on-site constructed on the substrate via a photoinduced pseudo-Fehling's route. The realistic interfacial charge separation and transformation capacities are remarkably promoted by the dynamic Cu2 O NCs under the actual catalysis condition, which achieves a milestone efficiency for nitrate-to-ammonia photosynthesis, including the targets of production rate (1.98±0.04 mol gCu -1  h-1 ), conversion ratio (94.2±0.91 %), and selectivity (98.6 %±0.55 %). The current work develops an effective strategy for integrating the active site construction into realistic reactions, providing new opportunities for Cu-based chemistry and catalysis sciences research.

Gas-induced controllable synthesis of the Cu(100) crystal facet for the selective electroreduction of CO2 to multicarbon products

Electrocatalytic CO2 reduction (ECR) to high value-added chemicals is an excellent method to attenuate the impact of greenhouse effect caused by CO2. At the same time, multicarbon products (C2+) get extensive attention in view of their relatively high energy density and market price. At present, Cu is an important metal electrocatalyst to convert CO2 into multicarbon products (e.g. ethylene, ethanol, and n-propanol); however, its poor selectivity impedes its practical application. It is well-known that the Cu(100) crystal facet can enhance the selectivity toward multicarbon products among different Cu crystal facets. Herein, the Cu nanoparticles were firstly prepared using the inductive effect of different gases (CO2, CO, Ar, N2, and air) during the Cu electrodeposition processes, in which the CO2-induced Cu catalyst (Cu-CO2) showed the largest normalized content of the Cu(100) crystal facet and the highest C2+ faradaic efficiency of 69% at a current density of 80 mA cm-2 in ECR. Subsequently, the different CO2 pressures during the Cu electrodepositions were studied to reveal the optimal CO2 pressure in the CO2-induced Cu synthesis for improved Cu(100) content as well as C2+ faradaic efficiency. Finally, density functional theory (DFT) calculations confirmed that CO2 molecules preferred to get adsorbed on the Cu(100) crystal facet, which resulted in not only the presence of dominant Cu(100) during the CO2-induced Cu synthesis but also the good electrocatalytic performance in ECR.

Stability Issues in Electrochemical CO2 Reduction: Recent Advances in Fundamental Understanding and Design Strategies

Electrochemical CO2 reduction reaction (CO2 RR) offers a promising approach to close the anthropogenic carbon cycle and store intermittent renewable energy in fuels or chemicals. On the path to commercializing this technology, achieving the long-term operation stability is a central requirement but still confronts challenges. This motivates to organize the present review to systematically discuss the stability issue of CO2 RR. This review starts from the fundamental understanding on the destabilization mechanisms of CO2 RR, with focus on the degradation of electrocatalyst and change of reaction microenvironment during continuous electrolysis. Subsequently, recent efforts on catalyst design to stabilize the active sites are summarized, where increasing atomic binding strength to resist surface reconstruction is highlighted. Next, the optimization of electrolysis system to enhance the operation stability by maintaining reaction microenvironment especially mitigating flooding and carbonate problems is demonstrated. The manipulation on operation conditions also enables to prolong CO2 RR lifespan through recovering catalytically active sites and mass transport process. This review finally ends up by indicating the challenges and future opportunities.

Chemical and Structural In-Situ Characterization of Model Electrocatalysts by Combined Infrared Spectroscopy and Surface X-ray Diffraction

New diagnostic approaches are needed to drive progress in the field of electrocatalysis and address the challenges of developing electrocatalytic materials with superior activity, selectivity, and stability. To this end, we developed a versatile experimental setup that combines two complementary in-situ techniques for the simultaneous chemical and structural analysis of planar electrodes under electrochemical conditions: high-energy surface X-ray diffraction (HE-SXRD) and infrared reflection absorption spectroscopy (IRRAS). We tested the potential of the experimental setup by performing a model study in which we investigated the oxidation of preadsorbed CO on a Pt(111) surface as well as the oxidation of the Pt(111) electrode itself. In a single experiment, we were able to identify the adsorbates, their potential dependent adsorption geometries, the effect of the adsorbates on the surface morphology, and the structural evolution of Pt(111) during surface electro-oxidation. In a broader perspective, the combined setup has a high application potential in the field of energy conversion and storage.

Dynamic Surface Reconstruction of Amphoteric Metal (Zn, Al) Doped Cu2 O for Efficient Electrochemical CO2 Reduction to C2+ Products

The recognition of the surface reconstruction of the catalysts during electrochemical CO2 reduction (CO2RR) is essential for exploring and comprehending active sites. Although the superior performance of Cu-Zn bimetallic sites toward multicarbon C2+ products has been established, the dynamic surface reconstruction has not been fully understood. Herein, Zn-doped Cu2 O nano-octahedrons are used to investigate the effect of the dynamic stability by the leaching and redeposition on CO2RR. Correlative characterizations confirm the Zn leaching from Zn-doped Cu2 O, which is redeposited at the surface of the catalysts, leading to dynamic stability and abundant Cu-Zn bimetallic sites at the surface. The reconstructed Zn-doped Cu2 O catalysts achieve a high Faradaic efficiency (FE) of C2+ products (77% at -1.1 V versus reversible hydrogen electrode (RHE)). Additionally, similar dynamic stability is also discovered in Al-doped Cu2 O for CO2RR, proving its universality in amphoteric metal-doped catalysts. Mechanism analyses reveal that the OHC-CHO pathway can be the C-C coupling processes on bare Cu2 O and Zn-doped Cu2 O, and the introduction of Zn to Cu can efficiently lower the energy barrier for CO2RR to C2 H4 . This research provides profound insight into unraveling surface dynamic reconstruction of amphoteric metal-containing electrocatalysts and can guide rational design of the high-performance electrocatalysts for CO2RR.

Perovskite-Derived Bismuth with I- and Cs+ Dual Modification for High-Efficiency CO2 -to-Formate Electrosynthesis and Al-CO2 Batteries

Bi-based materials are one of the most promising candidates for electrochemical CO2 reduction reaction (CO2 RR) to formate; however, the majority of them still suffer from low current density and stability that essentially constrain their potential applications at the industrial scale. Surface modification represents an effective approach to modulate the electrode microenvironment and the relative binding strength of key intermediates. Herein, it is demonstrated that the surface comodification with halides and alkali metal ions from the conversion of Bi-based halide perovskite nanocrystals is a viable strategy to boost the CO2 RR performance of Bi for formate electrosynthesis. Cs3 Bi2 I9 nanocrystals are prepared by a hot-injection method. The as-prepared products feature well-defined hexagonal shape and uniform size distribution. When used as the precatalyst, Cs3 Bi2 I9 nanocrystals are converted to Cs+ and I- comodified Bi. The resultant catalyst exhibits high formate Faradaic efficiency close to 100%, and remarkable partial current density up to 44 mA cm-2 in an H-cell and up to 276 mA cm-2 in a flow cell. Moreover, Cs3 Bi2 I9 is used as the cathode catalyst and paired with an Al anode in an Al-CO2 battery for simultaneous CO2 valorization and power generation.

Cooperative Copper Single-Atom Catalyst in 2D Carbon Nitride for Enhanced CO2 Electrolysis to Methane

Renewable-electricity-powered carbon dioxide (CO2 ) reduction (eCO2 R) to high-value fuels like methane (CH4 ) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2 R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. In this work, 2D carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), are exploited to host Cu-N2 type single-atom sites with high density (≈1.5 at%), via a facile metal-ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2 R-to-CH4 performance with Faradaic efficiency (FECH4 ) of ≈68% and a high partial current density of 348 mA cm-2 at -0.84 V vs reversible hydrogen electrode (RHE), surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the matrices and how the Cu local environment dictates the adsorbate BEs, density of states, and CO2 -to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2 R-to-CH4 pathway.

Nanograin-Boundary-Abundant Cu2O-Cu Nanocubes with High C2+ Selectivity and Good Stability during Electrochemical CO2 Reduction at a Current Density of 500 mA/cm2

Surface and interface engineering, especially the creation of abundant Cu⁰/Cu⁺ interfaces and nanograin boundaries, is known to facilitate C₂₊ production during electrochemical CO₂ reductions over copper-based catalysts. However, precisely controlling the favorable nanograin boundaries with surface structures (e.g., Cu(100) facets and Cu[n(100)×(110)] step sites) and simultaneously stabilizing Cu⁰/Cu⁺ interfaces is challenging, since Cu⁺ species are highly susceptible to be reduced into bulk metallic Cu at high current densities. Thus, an in-depth understanding of the structure evolution of the Cu-based catalysts under realistic CO₂RR conditions is imperative, including the formation and stabilization of nanograin boundaries and Cu⁰/Cu⁺ interfaces. Herein we demonstrate that the well-controlled thermal reduction of Cu₂O nanocubes under a CO atmosphere yields a remarkably stable Cu₂O-Cu nanocube hybrid catalyst (Cu₂O(CO)) possessing a high density of Cu⁰/Cu⁺ interfaces, abundant nanograin boundaries with Cu(100) facets, and Cu[n(100)×(110)] step sites. The Cu₂O(CO) electrocatalyst delivered a high C₂₊ Faradaic efficiency of 77.4% (56.6% for ethylene) during the CO₂RR under an industrial current density of 500 mA/cm². Spectroscopic characterizations and morphological evolution studies, together with in situ time-resolved attenuated total reflection-surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) studies, established that the morphology and Cu⁰/Cu⁺ interfacial sites in the as-prepared Cu₂O(CO) catalyst were preserved under high polarization and high current densities due to the nanograin-boundary-abundant structure. Furthermore, the abundant Cu⁰/Cu⁺ interfacial sites on the Cu₂O(CO) catalyst acted to increase the *CO adsorption density, thereby increasing the opportunity for C-C coupling reactions, leading to a high C₂₊ selectivity.

Promote electroreduction of CO2 via catalyst valence state manipulation by surface-capping ligand

Electrochemical CO2 reduction provides a potential means for synthesizing value-added chemicals over the near equilibrium potential regime, i.e., formate production on Pd-based catalysts. However, the activity of Pd catalysts has been largely plagued by the potential-depended deactivation pathways (e.g., [Formula: see text]-PdH to [Formula: see text]-PdH phase transition, CO poisoning), limiting the formate production to a narrow potential window of 0 V to -0.25 V vs. reversible hydrogen electrode (RHE). Herein, we discovered that the Pd surface capped with polyvinylpyrrolidone (PVP) ligand exhibits effective resistance to the potential-depended deactivations and can catalyze formate production at a much extended potential window (beyond -0.7 V vs. RHE) with significantly improved activity (~14-times enhancement at -0.4 V vs. RHE) compared to that of the pristine Pd surface. Combined results from physical and electrochemical characterizations, kinetic analysis, and first-principle simulations suggest that the PVP capping ligand can effectively stabilize the high-valence-state Pd species (Pdδ+) resulted from the catalyst synthesis and pretreatments, and these Pdδ+ species are responsible for the inhibited phase transition from [Formula: see text]-PdH to [Formula: see text]-PdH, and the suppression of CO and H2 formation. The present study confers a desired catalyst design principle, introducing positive charges into Pd-based electrocatalyst to enable efficient and stable CO2 to formate conversion.

CO2 electrolysis towards large scale operation: rational catalyst and electrolyte design for efficient flow-cell

The electrochemical CO₂ reduction reaction (CO₂RR) to renewable fuels/chemicals is a potential approach towards addressing the carbon neutral economy. To date, a comprehensive analysis of key performance indicators, such as an intrinsic property of catalyst, reaction environment and technological advancement in the flow cell, is limited. In this study, we discuss how the design of catalyst material, electrolyte and engineering gas diffusion electrode (GDE) could affect the CO₂RR in a gas-fed flow cell. Significant emphasis is given to scale-up requirements, such as promising catalysts with a partial current density of ≥100 mA cm^-2 and high faradaic efficiency. Additional experimental hurdles and their potential solutions, as well as the best available protocols for data acquisition for catalyst activity evaluation, are listed. We believe this manuscript provides some insights into the making of catalysts and electrolytes in a rational manner along with the engineering of GDEs towards CO₂RR.

Applications of Metal-Organic Frameworks and Their Derivatives in Electrochemical CO2 Reduction

Electrochemically reducing CO2 to more reduced chemical species is a promising way that not only enables the conversion of intermittent energy resources to stable fuels, but also helps to build a closed-loop anthropogenic carbon cycle. Among various electrocatalysts for electrochemical CO2 reduction, multifunctional metal-organic frameworks (MOFs) have been employed as highly efficient and selective heterogeneous electrocatalysts due to their ultrahigh porosity and topologically diverse structures. Up to now, great progress has been achieved in the design and synthesis of highly active and selective MOF-related catalysts for electrochemical CO2 reduction reaction (CO2RR), and their corresponding reaction mechanisms have been thoroughly studied. In this review, we summarize the recent progress of applying MOFs and their derivatives in CO2RR, with a focus on the design strategies for electrocatalysts and electrolyzers. We first discussed the reaction mechanisms for different CO2RR products and introduced the commonly applied electrolyzer configurations in the current CO2RR system. Then, an overview of several categories of products (CO, HCOOH, CH4, CH3OH, and multi-carbon chemicals) generated from MOFs or their derivatives via CO2RR was discussed. Finally, we offer some insights and perspectives for the future development of MOFs and their derivatives in electrochemical CO2 reduction. We aim to provide new insights into this field and further guide future research for large-scale applications.

Atomically Dispersed Manganese on Carbon Substrate for Aqueous and Aprotic CO2 Electrochemical Reduction

CO₂ utilization and conversion are of great importance in alleviating the rising CO₂ concentration in the atmosphere. Here, a single-atom catalyst (SAC) is reported for electrochemical CO₂ utilization in both aqueous and aprotic electrolytes. Specifically, atomically dispersed Mn-N₄ sites are embedded in bowl-like mesoporous carbon particles with the functionalization of epoxy groups in the second coordination spheres. Theoretical calculations suggest that the epoxy groups near the Mn-N₄ site adjust the electronic structure of the catalyst with reduced reaction energy barriers for the electrocatalytic reduction of CO₂ to CO. The resultant Mn-single-atom carbon with N and O doped catalyst (MCs-(N,O)) exhibits extraordinary electrocatalytic performance with a high CO faradaic efficiency of 94.5%, a high CO current density of 13.7 mA cm^-2 , and a low overpotential of 0.44 V in the aqueous environment. Meanwhile, as a cathode catalyst for aprotic Li-CO₂ batteries, the MCs-(N,O) with well-regulated active sites and unique mesoporous bowl-like morphology optimizes the nucleation behavior of discharge products. MCs-(N,O)-based batteries deliver a low overpotential and excellent cyclic stability of 1000 h. The findings in this work provide a new avenue to design and fabricate SACs for various electrochemical CO₂ utilization systems.

Directing oxygen reduction reaction selectivity towards hydrogen peroxide via electric double layer engineering

The electrochemical oxygen reduction reaction (ORR) has been recognized as a promising alternative for the sustainable production of H₂O₂. Here, we report a facile and effective strategy to promote ORR selectivity towards the 2e^- product H₂O₂via electric double layer engineering. Specifically, in a model system using immobilized cobalt phthalocyanine as the electrocatalyst, H₂O₂ selectivity has been improved from below 60% to over 93%, and the intrinsic activity for H₂O₂ formation has been enhanced by more than 3 times upon the introduction of a cationic surfactant (i.e., cetyltrimethylammonium bromide, CTAB) into the electrolyte. Based on detailed kinetics analysis, we conclude that the accelerated H₂O₂ formation rate results from the reduced charge transfer resistance in the rate limiting step and the promoted oxygen uptake rate. We propose that the electric field strength across the electric double layer is enhanced via the self-assembled single-tail cationic surfactant layer at the electrode/electrolyte interface, which is the origin of the enhancement of the 2e^- ORR performance.

In Situ Surface Reconstruction of Catalysts for Enhanced Hydrogen Evolution

The in situ surface reconstitution of a catalyst for hydrogen evolution refers to its structure evolution induced by strong interactions with reaction intermediates during the hydrogen evolution reaction (HER), which eventually leads to the self-optimization of active sites. In consideration of the superior performance that can be achieved by in situ surface reconstitution, more and more attention has been paid to the relationship between active site structure evolution and the self-optimization of HER activity. More and more in situ and/or operando techniques have been explored to track the dynamic structural evolution of HER catalysts in order to clarify the underlying mechanism. This review summarizes recent advances in various types of reconstruction such as the reconfiguration of crystallinity, morphological evolution, chemical composition evolution, phase transition refactoring, surface defects, and interface refactoring in the HER process. Finally, different perspectives and outlooks are offered to guide future investigations. This review is expected to provide some new clues for a deeper understanding of in situ surface reconfiguration in hydrogen evolution reactions and the targeted design of catalysts with desirable structures.

Identifying an Interfacial Stabilizer for Regeneration-Free 300 h Electrochemical CO2 Reduction to C2 Products

The electrochemical CO₂ reduction reaction (CO₂RR) to produce high value-added hydrocarbons and oxygenates presents a sustainable and compelling approach toward a carbon-neutral society. However, uncontrollable migration of active sites during the electrochemical CO₂RR limits its catalytic ability to simultaneously achieve high C₂ selectivity and ultradurability. Here, we demonstrate that the generated interfacial CuAlO₂ species can efficiently stabilize the highly active sites over the Cu-CuAlO₂-Al₂O₃ catalyst under harsh electrochemical conditions without active sites regeneration for a long-term test. We show that this unique Cu-CuAlO₂-Al₂O₃ catalyst exhibits ultradurable electrochemical CO₂RR performance with an 85% C₂ Faradaic efficiency for a 300 h test. Such a simple interfacial engineering design approach unveiled in this work would be adaptable to develop various ultradurable catalysts for industrial-scale electrochemical CO₂RR.

Functionalized Ag with Thiol Ligand to Promote Effective CO2 Electroreduction

It is challenging while critical to develop efficient catalysts that can achieve both high current density and high energy efficiency for electrocatalytic CO₂ reduction (CO₂R). Herein, we report a strategy of tailoring the surface electronic structure of an Ag catalyst via thiol ligand modification to improve its intrinsic activity, selectivity, and further energy efficiency toward CO₂R. Specifically, interconnected Ag nanoparticles with residual thiol ligands on the surface were prepared through electrochemical activation of a thiol-ligand-based Ag complex. When it was used as a catalyst for CO₂R, the thiol-ligand modified Ag exhibited high CO selectivity (>90%) throughout a wide electrode-potential range; furthermore, high cathodic energy efficiencies of >90% and >70% were obtained for CO formation at high current densities of 150 and 750 mA cm^-2, respectively, outperforming the state-of-the-art Ag-based electrocatalysts for CO₂ to CO conversion. The first-principle calculations on the reaction energetics suggest that the binding energies of the key intermediate -*COOH on Ag are optimized by the adsorbed thiol ligand, thus favoring CO formation while suppressing the competing H₂ evolution. Our findings provide a rational design strategy for CO₂ reduction electrocatalyst by electronic modulation through surface-adsorbed ligands.

Revealing the Nature of C-C Coupling Sites on a Cu Surface for CO2 Reduction

Electrochemical CO₂ reduction technology plays an important role in reducing CO₂ into valuable chemical fuels. Therein, Cu-based catalysts show superior performance for producing high-value C₂₊ products. Here, we illustrate the ascendency of high-index facets of Cu catalysts in producing C₂₊ products and find that two kinds of sites favor C-C coupling on the surface. One is prone to adsorb the C-C coupling structure by spanning stepped coppers with different coordination numbers. The other is to embed the structure along two columns of Cu with similar characteristics through O and C adsorbed simultaneously. Within all research surfaces, the coupling energy barrier is lowest on the Cu(911) facet, which is consistent with the experiment. The less charged sites promote the stabilization of the CO-CO structure as determined by charge analysis. Furthermore, our results suggest that the high selectivity for C₂₊ products on a Cu surface could significantly come from the contribution of the high-index facet.

Surfactant-modified Zn nanosheets on carbon paper for electrochemical CO2 reduction to CO

We report a strategy that tunes the CO₂ and proton concentrations near the electrode-electrolyte interface using surfactant modification with various amounts (0.05, 0.8, 1.6, and 3.2 mg) of hexadecyl trimethyl ammonium bromide (CTAB). The positively charged group of CTAB favors CO₂ surface diffusion and inhibits excessive proton accumulation on Zn nanosheets on carbon paper. A CO faradaic efficiency of 95.6% and a total ampere density of -13.1 mA cm^-2 were obtained over the optimal CTAB-modified Zn electrode at -1.1 V with stability over 12 hours.

Anion-exchange membrane water electrolyzers and fuel cells

The key components, working management, and operating techniques of anion-exchange membrane water electrolyzers and fuel cells are reviewed for the first time.