Multifunctional Hyphae Carbon Powering Lithium-Sulfur Batteries

Recent Advances in Current Collectors for Aqueous Zinc-ion Batteries

Aqueous zinc-ion batteries (AZIBs) are promising options for large-scale electrical energy storage because of their safety, affordability, and environmental friendliness. As an indispensable component of AZIBs, a current collector plays a crucial role in supporting electrode materials and collecting the accumulated electrical energy. Recently, some progress has been made in the study of current collectors for AZIBs; however, only few comprehensive reviews on this topic are available. In this review, the systematic summary and discussion of research progress on current collectors for AZIBs is presented. Furthermore, the main challenges and key prospects for the future development of current collectors for AZIBs are discussed.

Breaking the Passivation Effect for MnO2 Catalysts in Li-S Batteries by Anion-Cation Doping

Transition metal oxides (TMOs) are recognized as high-efficiency electrocatalyst systems for restraining the shuttle effect in lithium-sulfur (Li-S) batteries, owing to their robust adsorption capabilities for polysulfides. However, the sluggish catalytic conversion of Li2S redox and severe passivation effect of TMOs exacerbate polysulfide shuttling and reduce the cyclability of Li-S batteries, which significantly hinders the development of TMOs electrocatalysts. Here, through the anion-cation doping approach, dual incorporation of phosphorus and molybdenum into MnO2 (P,Mo-MnO2) was engineered, demonstrating effective mitigation of the passivation effect and allowing for the simultaneous immobilization of polysulfides and rapid redox kinetics of Li2S. Both experimental and theoretical investigations reveal the pivotal role of dopants in fine-tuning the d-band center and optimizing the electronic structure of MnO2. Furthermore, this well-designed configuration processes catalytic selectivity. Specifically, P-doping expedites rapid Li2S nucleation kinetics by minimizing reaction-free energy, while Mo-doping facilitates robust Li2S dissolution kinetics by mitigating decomposition barriers. This dual-doping approach equips P,Mo-MnO2 with robust bi-directional catalytic activity, effectively overcoming passivation effect and suppressing the notorious shuttle effect. Consequently, Li-S batteries incorporating P,Mo-MnO2-based separators demonstrate favorable performance than pristine TMOs. This design offers rational viewpoint for the development of catalytic materials with superior bi-directional sulfur electrocatalytic in Li-S batteries.

Versatile Separators Toward Advanced Lithium-Sulfur Batteries: Status, Recent Progress, Challenges and Perspective

Lithium-sulfur batteries (LSBs) have recently gained extensive attention due to their high energy density, low cost, and environmental friendliness. However, serious shuttle effect and uncontrolled growth of lithium dendrites restrict them from further commercial applications. As "the third electrode", functional separators are of equal significance as both anodes and cathodes in LSBs. The challenges mentioned above are effectively addressed with rational design and optimization in separators, thereby enhancing their reversible capacities and cycle stability. The review discusses the status/operation mechanism of functional separators, then primarily focuses on recent research progress in versatile separators with purposeful modifications for LSBs, and summarizes the methods and characteristics of separator modification, including heterojunction engineering, single atoms, quantum dots, and defect engineering. From the perspective of the anodes, distinct methods to inhibit the growth of lithium dendrites by modifying the separator are discussed. Modifying the separators with flame retardant materials or choosing a solid electrolyte is expected to improve the safety of LSBs. Besides, in-situ techniques and theoretical simulation calculations are proposed to advance LSBs. Finally, future challenges and prospects of separator modifications for next-generation LSBs are highlighted. We believe that the review will be enormously essential to the practical development of advanced LSBs.

Roller-like Spore Carbon Sphere-Orientated Graphene Fibers Prepared via Rheological Engineering for Lithium Sulfur Batteries

Flexible batteries with large energy densities, lightweight nature, and high mechanical strength are considered as an eager goal for portable electronics. Herein, we first propose free-standing graphene fiber electrodes containing roller-like orientated spore carbon spheres via rheological engineering. With the help of the orientated microfluidic cospinning technology and the plasma reduction method, spore carbon spheres are self-assembled and orientedly dispersed into numerous graphene flakes, forming graphene fiber electrodes enriched with internal rolling woven structures, which cannot only enhance the electrical contact between active materials but also effectively improve the mechanical strength and structure stability of graphene fiber electrodes. When the designed graphene fibers are combined with the active sulfur cathode and lithium metal anode, the assembled flexible lithium sulfur batteries possess superior electrochemical performance with high capacity (>1000 mA h g-1) and excellent cycling life as well as good mechanical properties. According to density functional theory and COMSOL simulations, the roller-like spore carbon sphere-orientated graphene fiber hosts provide reinforced trapping-catalytic-conversion behavior to soluble polysulfides and nucleation active sites to lithium metal, thus synergistically suppressing the shuttle effect of polysulfides at the cathode side and lithium dendrite growth at the anode side, thereby boosting the whole electrochemical properties of lithium sulfur batteries.

Interface-reinforced high-capacity fiber cathode for wearable Li-S batteries

Fiber-shaped Li-S batteries are attractive for constructing smart textiles as flexible power solutions due to their high theoretical specific capacity, flexibility and wearability. However, severe interfacial issues, such as the shuttle effect of polysulfides on the cathode side, lead to capacity decay and poor lifespan of the batteries. Herein, we report a fiber-shaped composite cathode with collaborative interface interactions to maintain electrode integrity and boost electrochemical performance. In this architecture, nanosulfur-polyvinylpyrrolidone (nanoS-PVP) particles are uniformly implanted into the few-layer Ti3C2T x with outstanding electrical conductivity and then coated on aluminum (Al) fiber current collectors. Impressively, nanoS and soluble polysulfides are restricted to the cathode side via synergy physical confinement and chemical adsorption of Ti3C2T x . The PVP chains on the surface of the nanoS prevent the sulfur from agglomeration and bridge the Ti3C2T x by abundant hydrogen bonds. The enhanced interface endows the cathode with excellent mechanical flexibility, good adsorption of polysulfides and fast reaction kinetics. Consequently, the prepared Ti3C2T x /nanoS-PVP@Al cathode exhibits excellent cycling performance (capacity retention of 92.8% after 1000 cycles at 1 C), high-rate capacity (556.2 mAh g-1 at 2.0 C) and high linear capacity (22.9 mAh m-1). Additionally, the fiber-shaped Li-S battery works effectively under deformation and high/low-temperature conditions. It can be integrated into the fabric to power light emitting diodes or charge a smartphone wirelessly.

Mussel and Cobweb Inspired High Areal Capacity SPAN Electrode

Lithium-sulfur batteries (LSBs) with superior energy density are among the most promising candidates for next-generation energy storage techniques. Sulfurized polyacrylonitrile (SPAN) exhibits competitive advantages in terms of cycle stability, rate performance as well as cost. However, the preparation of high-loading SPAN electrodes is still challenging. Herein, inspired by mussel and cobweb, a high-loading SPAN electrode is enabled by the combination of polydopamine (PDA) coating and a bimodal distributed single-wall carbon nanotubes (SWCNT) slurry dispersed in polyvinylpyrrolidone (PVP), their synergistic effect not only constructs effective electron percolating networks within the electrode but also make high active material (AM) ratio possible. High areal capacity PDA@SPAN electrode (18.40 mAh cm-2 in the initial cycle) with negligible specific capacity attenuation as the mass loading increasement is realized through the facile slurry casting process. The dynamic N─H…O hydrogen bond is formed between PDA and PVP and the electrode integrity during charge/discharge is greatly strengthened. The battery with an areal AM loading of 7.16 mg cm-2 (5.16 mAh cm-2) retains 92.0% of capacity in 80 cycles and 87.18% in 160 cycles, and it also shows stable cycle performances even with a high loading of 19.79 mg cm-2 and lean electrolyte (3.28 µL mg-1).

Juice Vesicles Bioreactors Technology for Constructing Advanced Carbon-Based Energy Storage

The construction of high-quality carbon-based energy materials through biotechnology has always been an eager goal of the scientific community. Herein, juice vesicles bioreactors (JVBs) bio-technology based on hesperidium (e.g., pomelo, waxberry, oranges) is first reported for preparation of carbon-based composites with controllable components, adjustable morphologies, and sizes. JVBs serve as miniature reaction vessels that enable sophisticated confined chemical reactions to take place, ultimately resulting in the formations of complex carbon composites. The newly developed approach is highly versatile and can be compatible with a wide range of materials including metals, alloys, and metal compounds. The growth and self-assembly mechanisms of carbon composites via JVBs are explained. For illustration, NiCo alloy nanoparticles are successfully in situ implanted into pomelo vesicles crosslinked carbon (PCC) by JVBs, and their applications as sulfur/carbon cathodes for lithium-sulfur batteries are explored. The well-designed PCC/NiCo-S electrode exhibits superior high-rate properties and enhanced long-term stability. Synergistic reinforcement mechanisms on transportation of ions/electrons of interface reactions and catalytic conversion of lithium polysulfides arising from metal alloy and carbon architecture are proposed with the aid of DFT calculations. The research provides a novel biosynthetic route to rational design and fabrication of carbon composites for advanced energy storage.

Toward robust lithium-sulfur batteries via advancing Li2S deposition

Lithium-sulfur batteries (LSBs) with two typical platforms during discharge are prone to the formation of soluble lithium polysulfides (LiPS), leading to a decrease in the cycling life of the battery. Under practical working conditions, the transformation of S8 into Li2S is cross-executed rather than a stepwise reaction, where the liquid LiPS to solid Li2S conversion can occur at a high state of charge (SOC) to maintain the current requirement. Therefore, advancing Li2S deposition can effectively reduce the accumulation of LiPSs and ultimately improve the reaction kinetics. Herein, a "butterfly material" GeS2-MoS2/rGO is used as a sulfur host. Rich catalytic heterointerfaces can be obtained via the abundant S-S bonds formed between GeS2 and MoS2. MoS2 (left wing) can enhance LiPS adsorption, while the lattice-matching nature of Fdd2 GeS2 (right wing) and Fm3̄m Li2S can induce multiple nucleation and regulate the 3D growth of Li2S. Li2S deposition can be advanced to occur at 80% SOC, thereby effectively inhibiting the accumulation of soluble LiPSs. Attributed to the synergistic effect of catalytic and lattice-matching properties, robust coin and pouch LSBs can be achieved.

Advanced Polymers in Cathodes and Electrolytes for Lithium-Sulfur Batteries: Progress and Prospects

Lithium-sulfur (Li-S) batteries, which store energy through reversible redox reactions with multiple electron transfers, are seen as one of the promising energy storage systems of the future due to their outstanding advantages. However, the shuttle effect, volume expansion, low conductivity of sulfur cathodes, and uncontrollable dendrite phenomenon of the lithium anodes have hindered the further application of Li-S batteries. In order to solve the problems and clarify the electrochemical reaction mechanism, various types of materials, such as metal compounds and carbon materials, are used in Li-S batteries. Polymers, as a class of inexpensive, lightweight, and electrochemically stable materials, enable the construction of low-cost, high-specific capacity Li-S batteries. Moreover, polymers can be multifunctionalized by obtaining rich structures through molecular design, allowing them to be applied not only in cathodes, but also in binders and solid-state electrolytes to optimize electrochemical performance from multiple perspectives. The most widely used areas related to polymer applications in Li-S batteries, including cathodes and electrolytes, are selected for a comprehensive overview, and the relevant mechanisms of polymer action in different components are discussed. Finally, the prospects for the practical application of polymers in Li-S batteries are presented in terms of advanced characterization and mechanistic analysis.

Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms

Rechargeable metal-sulfur batteries are considered promising candidates for energy storage due to their high energy density along with high natural abundance and low cost of raw materials. However, they could not yet be practically implemented due to several key challenges: (i) poor conductivity of sulfur and the discharge product metal sulfide, causing sluggish redox kinetics, (ii) polysulfide shuttling, and (iii) parasitic side reactions between the electrolyte and the metal anode. To overcome these obstacles, numerous strategies have been explored, including modifications to the cathode, anode, electrolyte, and binder. In this review, the fundamental principles and challenges of metal-sulfur batteries are first discussed. Second, the latest research on metal-sulfur batteries is presented and discussed, covering their material design, synthesis methods, and electrochemical performances. Third, emerging advanced characterization techniques that reveal the working mechanisms of metal-sulfur batteries are highlighted. Finally, the possible future research directions for the practical applications of metal-sulfur batteries are discussed. This comprehensive review aims to provide experimental strategies and theoretical guidance for designing and understanding the intricacies of metal-sulfur batteries; thus, it can illuminate promising pathways for progressing high-energy-density metal-sulfur battery systems.

Multifunctional Vanadium Nitride-Modified Separator for High-Performance Lithium-Sulfur Batteries

Lithium-sulfur batteries (LSBs) are recognized as among the best potential alternative battery systems to lithium-ion batteries and have been widely investigated. However, the shuttle effect has severely restricted the advancement in their practical applications. Here, we prepare vanadium nitride (VN) nanoparticles grown in situ on a nitrogen-doped carbon skeleton (denoted as VN@NC) derived from the MAX phase and use it as separator modification materials for LSBs to suppress the shuttle effect and optimize electrochemical performance. Thanks to the outstanding catalytic performance of VN and the superior electrical conductivity of carbon skeleton derived from MAX, the synergistic effect between the two accelerates the kinetics of both lithium polysulfides (LiPSs) to Li2S and the reverse reaction, effectively suppresses the shuttle effect, and increases cathode sulfur availability, significantly enhancing the electrochemical performance of LSBs. LSBs constructed with VN@NC-modified separators achieve outstanding rate performance and cycle stability. With a capacity of 560 mAh g-1 at 4 C, it exhibits enhanced structural and chemical stability. At 1 C, the device has an incipient capacity of 1052.4 mAh g-1, and the degradation rate averaged only 0.085% over 400cycles. Meanwhile, the LSBs also show larger capacities and good cycling stability at a low electrolyte/sulfur ratio and high surface-loaded sulfur conditions. Thus, a facile and efficient way of preparing modified materials for separators is provided to realize high-performance LSBs.

Hyphae Carbon Coupled with Gel Composite Assembly for Construction of Advanced Carbon/Sulfur Cathodes for Lithium-Sulfur Batteries

The design and fabrication of novel carbon hosts with high conductivity, accelerated electrochemical catalytic activities, and superior physical/chemical confinement on sulfur and its reaction intermediates polysulfides are essential for the construction of high-performance C/S cathodes for lithium-sulfur batteries (LSBs). In this work, a novel biofermentation coupled gel composite assembly technology is developed to prepare cross-linked carbon composite hosts consisting of conductive Rhizopus hyphae carbon fiber (RHCF) skeleton and lamellar sodium alginate carbon (SAC) uniformly implanted with polarized nanoparticles (V2O3, Ag, Co, etc.) with diameters of several nanometers. Impressively, the RHCF/SAC/V2O3 composites exhibit enhanced physical/chemical adsorption of polysulfides due to the synergistic effect between hierarchical pore structures, heteroatoms (N, P) doping, and polar V2O3 generation. Additionally, the catalytic conversion kinetics of cathodes are effectively improved by regulating the 3D carbon structure and optimizing the V2O3 catalyst. Consequently, the LSBs assembled with RHCF/SAC/V2O3-S cathode show exceptional cycle stability (capacity retention rate of 94.0% after 200 cycles at 0.1 C) and excellent rate performance (specific capacity of 578 mA h g-1 at 5 C). This work opens a new door for the fabrication of hyphae carbon composites via fermentation for electrochemical energy storage.

An Advanced Gel Polymer Electrolyte for Solid-State Lithium Metal Batteries

All-solid-state lithium metal batteries (LMBs) are regarded as one of the most viable energy storage devices and their comprehensive properties are mainly controlled by solid electrolytes and interface compatibility. This work proposes an advanced poly(vinylidene fluoride-hexafluoropropylene) based gel polymer electrolyte (AP-GPEs) via functional superposition strategy, which involves incorporating butyl acrylate and polyethylene glycol diacrylate as elastic optimization framework, triethyl phosphate and fluoroethylene carbonate as flameproof liquid plasticizers, and Li7La3Zr2O12 nanowires (LLZO-w) as ion-conductive fillers, endowing the designed AP-GPEs/LLZO-w membrane with high mechanical strength, excellent flexibility, low flammability, low activation energy (0.137 eV), and improved ionic conductivity (0.42 × 10-3 S cm-1 at 20 °C) due to continuous ionic transport pathways. Additionally, the AP-GPEs/LLZO-w membrane shows good safety and chemical/electrochemical compatibility with the lithium anode, owing to the synergistic effect of LLZO-w filler, flexible frameworks, and flame retardants. Consequently, the LiFePO4/Li batteries assembled with AP-GPEs/LLZO-w electrolyte exhibit enhanced cycling performance (87.3% capacity retention after 600 cycles at 1 C) and notable high-rate capacity (93.3 mAh g-1 at 5 C). This work proposes a novel functional superposition strategy for the synthesis of high-performance comprehensive GPEs for LMBs.

Zero-Strain Na3 V2 (PO4 )2 F3 @Rgo/CNT Composite as a Wide-Temperature-Tolerance Cathode for Na-Ion Batteries with Ultrahigh-Rate Performance

Sodium-ion batteries (SIBs) are widely considered a hopeful alternative to lithium-ion battery technology. However, they still face challenges, such as low rate capability, unsatisfactory cycling stability, and inferior variable-temperature performance. In this study, a hierarchical Na3 V2 (PO4 )2 F3 (NVPF) @reduced graphene oxide (rGO)/carbon nanotube (CNT) composite (NVPF@rGO/CNT) is successfully constructed. This composite features 0D Na3 V2 (PO4 )2 F3 nanoparticles are coated by a cross-linked 3D conductive network composed of 2D rGO and 1D CNT. Furthermore, the intrinsic Na+ storage mechanism of NVPF@rGO/CNT through comprehensive characterizations is unveiled. The synthesized NVPF@rGO/CNT exhibits fast ionic/electronic transport and excellent structural stability within wide working temperatures (-40-50 °C), owing to the zero-strain NVPF and the coated rGO/CNT conductive network that reduces diffusion distance for ions and electrons. Moreover, the stable integration between NVPF and rGO/CNT enables outstanding structural stability to alleviate strain and stress induced during the cycle. Additionally, a practice full cell is assembled employing a hard carbon anode paired with an NVPF@rGO/CNT cathode, which provides a decent capacity of 105.2 mAh g-1 at 0.2 C, thereby attaining an ideal energy density of 242.7 Wh kg-1 . This work provides valuable insights into developing high-energy and power-density cathode materials for SIBs.

Synchronous Redox Reactions in Copper Oxalate Enable High-Capacity Anode for Proton Battery

Proton batteries are competitive due to their merits such as high safety, low cost, and fast kinetics. However, it is generally difficult for current studies of proton batteries to combine high capacity and high stability, while the research on proton storage mechanism and redox behavior is still in its infancy. Herein, the polyanionic layered copper oxalate is proposed as the anode for a high-capacity proton battery for the first time. The copper oxalate allows for reversible proton insertion/extraction through the layered space but also achieves high capacity through synchronous redox reactions of Cu2+ and C2O42-. During the discharge process, the bivalent Cu-ion is reduced, whereas the C═O of the oxalate group is partially converted to C-O. This synchronous behavior presents two units of charge transfer, enabling the embedding of two units of protons in the (110) crystal face. As a result, the copper oxalate anode demonstrates a high specific capacity of 226 mAh g-1 and maintains stable operation over 1000 cycles with a retention of 98%. This work offers new insights into the development of dual-redox electrode materials for high-capacity proton batteries.

Bifunctional Additive for Lithium-Sulfur Batteries Based on the Metal-Phthalocyanine Complex

With extremely high specific capacity and high energy density, lithium-sulfur batteries (LSBs) have attracted enormous interest as promising candidates for energy storage devices. However, several problems, such as the shuttle effect and sluggish redox kinetics, hinder the successful realization of LSBs on an industrial scale. Therefore, designing an efficient electrode material to inhibit the shuttle effect and improve the reaction kinetics of polysulfides (LiPS) is of utmost significance. Herein, a bifunctional additive with excellent polysulfide adsorption and superior catalytic behavior is developed using the phthalocyanine-tetrasulfonic acid nickel complex tetrasodium salt (Ni-PCTs) additive. Ni-PCTs provide effective trapping of LiPS due to their abundant sulfonic acid groups. Moreover, Ni-PCTs exhibit effective catalytic conversion of LiPS due to the presence of N atoms in the phthalocyanine ring as well as the central Ni atoms. Consequently, the as-assembled LSBs, with a 10 wt % Ni-PCTs additive, exhibit a significant increase in specific capacities, such as the high initial specific capacity of 1283 mA h g-1 at 0.15 mA/cm2 and a stable specific capacity of 623 mA h g-1 after 400 cycles. The current study demonstrates the promise of metal phthalocyanines for sulfur cathodes, opening up avenues for further research and development of LSBs.

Electrolytic Graphene Encapsulated CeO2 for Lithium-Sulfur Battery Interlayer Separator

Rare earth elements and graphene composites exhibit better catalytic properties in energy storage materials. The introduction of rare earth oxide and graphene composites as functional layers into the separator to seal the "shuttle effect" formed by polysulfides during the discharge process has proven to be effective. In this study, we prepared CeO2/graphene composites (labeled as CeG) by intercalation exfoliation and in situ electrodeposition methods simultaneously, in which CeO2 was encapsulated in large folds of graphene, which exhibited good defect levels (ID/IG < 1) and its intrinsically superior physical structure acted as a shielding layer to hinder the shuttle of polysulfides, improving the cycling stability and rate of cell performance. The separator cell with CeG achieves an initial discharge specific capacity of 1133.5 mAh/g at 0.5C, excellent rate performance (978.5 mAh/g at 2C), and long cycling (790 mAh/g after 400 cycles).

Solid-State Electrolytes in Lithium-Sulfur Batteries: Latest Progresses and Prospects

Solid-state lithium-sulfur batteries (SSLSBs) have attracted tremendous research interest due to their large theoretical energy density and high safety, which are highly important indicators for the development of next-generation energy storage devices. Particularly, safety and "shuttle effect" issues originating from volatile and flammable liquid organic electrolytes can be fully mitigated by switching to a solid-state configuration. However, their road to thecommercial application is still plagued with numerous challenges, most notably the intrinsic electrochemical instability of solid-state electrolytes (SSEs) materials and their interfacial compatibility with electrodes and electrolytes. In this review, a critical discussion on the key issues and problems of different types of SSEs as well as the corresponding optimization strategies are first highlighted. Then, the state-of-the-art preparation methods and properties of different kinds of SSE materials, and their manufacture, characterization and performance in SSLSBs are summarized in detail. Finally, a scientific outlook for the future development of SSEs and the avenue to commercial application of SSLSBs is also proposed.

Electroactive Microorganisms in Advanced Energy Technologies

Large-scale production of green and pollution-free materials is crucial for deploying sustainable clean energy. Currently, the fabrication of traditional energy materials involves complex technological conditions and high costs, which significantly limits their broad application in the industry. Microorganisms involved in energy production have the advantages of inexpensive production and safe process and can minimize the problem of chemical reagents in environmental pollution. This paper reviews the mechanisms of electron transport, redox, metabolism, structure, and composition of electroactive microorganisms in synthesizing energy materials. It then discusses and summarizes the applications of microbial energy materials in electrocatalytic systems, sensors, and power generation devices. Lastly, the research progress and existing challenges for electroactive microorganisms in the energy and environment sectors described herein provide a theoretical basis for exploring the future application of electroactive microorganisms in energy materials.

Microbe‐Mediated Biosynthesis of Multidimensional Carbon‐Based Materials for Energy Storage Applications

Biosynthesis methods are considered to be a promising technology for engineering new carbon‐based materials or redesigning the existing ones for specific purposes with the aid of synthetic biology. Lots of biosynthetic processes including metabolism, fermentation, biological mineralization, and gene editing have been adopted to prepare novel carbon‐based materials with exceptional properties that cannot be realized by traditional chemical methods, because microbes evolved to possess special abilities to modulate components/structure of materials. In this review, the recent development on carbon‐based materials prepared via different biosynthesis methods and various microbe factories (such as bacteria, yeasts, fungus, viruses, proteins) are systematically reviewed. The types of biotechniques and the corresponding mechanisms for the synthesis of carbon‐based materials are outlined. This review also focuses on the structural design and compositional engineering of carbon‐based nanostructures (e.g., metals, semiconductors, metal oxides, metal sulfides, phosphates, Mxenes) derived from biotechnology and their applications in electrochemical energy storage devices. Moreover, the relationship of the architecture–composition–electrochemical behavior and performance enhancement mechanism is also deeply discussed and analyzed. Finally, the development perspectives and challenges on the biosynthetic carbons are proposed and may pave a new avenue for rational design of advanced materials for the low‐carbon economy.

Rough Endoplasmic Reticulum Inspired Polystyrene-Brush-Based Superhigh Sulfur Content Cathodes Enable Lithium-Sulfur Cells with High Mass and Capacity Loading

The development of highly sophisticated biomimetic models is significant yet remains challenging in the electrochemical energy storage field. Lithium-sulfur (Li-S) cells with high sulfur content and high-sulfur-loading cathodes are urgently required to meet the fast-growing demand for electronic devices. Nevertheless, such cathode materials generally suffer from large sulfur agglomeration, nonporous structure, and insufficient conductivity, leading to rapid capacity decay and low sulfur utilization. Herein, inspired by rough endoplasmic reticulum, a 2D polystyrene (PS)-brush-based (G-g-PS) superhigh-sulfur-content (96 wt%) composite(G-g-sPS@S) is fabricated via the vulcanization reaction. The vulcanized PS side-chains and their S₈ composites on the nanosheet surface can efficiently provide sulfur species, and the intersheet interstitial pores can provide rapid mass-transfer channels for redox reactions of sulfur species. Furthermore, the highly sulfophilic vulcanized PS side-chains are able to effectively inhibit the shuttle effect of polysulfides and regulate their redox process. With these merits, the cells with G-g-sPS@S cathodes exhibit an ultralow decay rate of 0.02% per cycle over 400 cycles at 2 C and deliver a superior areal capacity of 12.6 mAh cm^-2 even with a high sulfur loading of 10.5 mg cm^-2 .

Highly Connected Three-Dimensional Covalent Organic Framework with Flu Topology for High-Performance Li-S Batteries

Lithium-sulfur batteries (LSBs) have been considered as a promising candidate for next-generation energy storage devices, which however still suffer from the shuttle effect of the intermediate lithium polysulfides (LiPSs). Covalent-organic frameworks (COFs) have exhibited great potential as sulfur hosts for LSBs to solve such a problem. Herein, a pentiptycene-based D_2h symmetrical octatopic polyaldehyde, 6,13-dimethoxy-2,3,9,10,18,19,24,25-octa(4'-formylphenyl)pentiptycene (DMOPTP), was prepared and utilized as a building block toward preparing COFs. Condensation of DMOPTP with 4-connected tetrakis(4-aminophenyl)methane affords an expanded [8 + 4] connected network 3D-flu-COF, with a flu topology. The non-interpenetrated nature of the flu topology endows 3D-flu-COF with a high Brunauer-Emmett-Teller surface area of 2860 m² g^-1, large octahedral cavities, and cross-linked tunnels in the framework, enabling a high loading capacity of sulfur (∼70 wt %), strong LiPS adsorption capability, and facile ion diffusion. Remarkably, when used as a sulfur host for LSBs, 3D-flu-COF delivers a high capacity of 1249 mA h g^-1 at 0.2 C (1.0 C = 1675 mA g^-1), outstanding rate capability (764 mA h g^-1 at 5.0 C), and excellent stability, representing one of the best results among the thus far reported COF-based sulfur host materials for LSBs and being competitive with the state-of-the-art inorganic host materials.

Design and synthesis of novel pomegranate-like TiN@MXene microspheres as efficient sulfur hosts for advanced lithium sulfur batteries

Lithium-sulfur (Li-S) batteries have the characteristics of low cost, environmental protection, and high theoretical energy density, and have broad application prospects in the new generation of electronic products. However, there are some problems that seriously hinder the Li-S batteries from going from the laboratory to the factory, such as poor stability caused by the large volume expansion of sulfur during charging and discharging, sluggish kinetics of the electrochemical reaction resulting from the low conductivity of the active materials, and loss of active materials arising from the dissolution and diffusion of the intermediate product lithium polysulfides (LiPSs). In this paper, the two-dimensional layered material MXene and TiN are firstly combined by spray drying method to prepare pomegranate-like TiN@MXene microspheres with both adsorption capacity and catalytic effect on LiPSs conversion. The interconnected skeleton composed of MXene not only solves the problem of easy stacking of MXene sheets but also ensures the uniform distribution of sulfur. Without affecting the excellent characteristics of MXene itself, the overall conductivity of the composite electrode material is improved. The TiN hollow nanospheres are coated with MXene layers to form a shell, catalyzing the adsorption of LiPSs and accelerating the transformation of high-order LiPSs to Li2S2/Li2S. As a result, the TiN@MXene cathode delivers a high initial discharge capacity of 1436 mA h g-1 at 0.1C, excellent rate performance of 636 mA h g-1 up to 3C, and an ultralong lifespan over 1000 cycles with a small capacity decay of 0.048% per cycle at the current density of 1.0C.

Enhanced lithium polysulfide adsorption on an iron-oxide-modified separator for Li-S batteries

Lithium-sulfur (Li-S) batteries are candidates for next-generation energy storage systems because of their low cost, high theoretical specific capacity and safety. However, the serious lithium polysulfide (LiPS) shuttle effect leads to a loss of reactive active substances and reduction of coulombic efficiency. In the current work, iron oxide (IO-700)-prepared by calcining a mixture of carbon spheres and ferric nitrate under an air atmosphere at 700 °C-was designed as a separator modifier to effectively adsorb LiPSs and accelerate the kinetics of the transformation of the intermediates, thereby inhibiting the shuttle effect. Li-S batteries including IO-700 showed long-term stability for 1000 cycles at 1C, with a capacity decay rate per cycle of only 0.0487%. A theoretical calculation indicated that, due to strongly polar active sites, Fe₂O₃ adsorbed LiPSs effectively to suppress the shuttle effect. This work has highlighted the importance for Li-S batteries of strongly polar active sites for anchoring LiPSs to inhibit the shuttle effect.

Dual-Silica Template-Mediated Synthesis of Nitrogen-Doped Mesoporous Carbon Nanotubes for Supercapacitor Applications

1D carbon nanotubes have been widely applied in many fields, such as catalysis, sensing and energy storage. However, the long tunnel-like pores and relatively low specific surface area of carbon nanotubes often restrict their performance in certain applications. Herein, a dual-silica template-mediated method to prepare nitrogen-doped mesoporous carbon nanotubes (NMCTs) through co-depositing polydopamine (both carbon and nitrogen precursors) and silica nanoparticles (the porogen for mesopore formation) on a silica nanowire template is proposed. The obtained NMCTs have a hierarchical pore structure of large open mesopores and tubular macropores, a high specific surface area (1037 m² g^-1 ), and homogeneous nitrogen doping. The NMCT-45 (prepared at an interval time of 45 min) shows excellent performance in supercapacitor applications with a high capacitance (373.6 F g^-1 at 1.0 A g-¹ ), excellent rate capability, high energy density (11.6 W h kg^-1 at a power density of 313 W kg^-1 ), and outstanding cycling stability (98.2% capacity retention after 10 000 cycles at 10 A g^-1 ). Owing to the unique tubular morphology, hierarchical porosity and homogeneous N-doping, the NMCT also has tremendous potential in electrochemical catalysis and sensing applications.

Stretchable, Ultratough, and Intrinsically Self-Extinguishing Elastomers with Desirable Recyclability

Advanced elastomers are increasingly used in emerging areas, for example, flexible electronics and devices, and these real-world applications often require elastomers to be stretchable, tough and fire safe. However, to date there are few successes in achieving such a performance portfolio due to their different governing mechanisms. Herein, a stretchable, supertough, and self-extinguishing polyurethane elastomers by introducing dynamic π-π stacking motifs and phosphorus-containing moieties are reported. The resultant elastomer shows a large break strain of ≈2260% and a record-high toughness (ca. 460 MJ m-3 ), which arises from its dynamic microphase-separated microstructure resulting in increased entropic elasticity, and strain-hardening at large strains. The elastomer also exhibits a self-extinguishing ability thanks to the presence of both phosphorus-containing units and π-π stacking interactions. Its promising applications as a reliable yet recyclable substrate for strain sensors are demonstrated. The work will help to expedite next-generation sustainable advanced elastomers for flexible electronics and devices applications.

Interlayer Modulation of Layered Transition Metal Compounds for Energy Storage

Layered transition metal compounds are one of the most important electrode materials for high-performance electrochemical energy storage devices, such as batteries and supercapacitors. Charge storage in these materials can be achieved via intercalation of ions into the interlayer channels between the layer slabs. With the development of lithium-beyond batteries, larger carrier ions require optimized interlayer space for the unrestricted diffusion in the two-dimensional channels and effectively shielded electrostatic interaction between the slabs and interlayer ions. Therefore, interlayer modulation has become an efficient and promising approach to overcome the problems of sluggish kinetics, structural distortion, irreversible phase transition, dissolution of some transition metal elements, and air instability faced by these materials and thus enhance the overall electrochemical performance. In this review, we focus on the interlayer modulation of layered transition metal compounds for various batteries and supercapacitors. Merits of interlayer modulation on the charge storage procedures of charge transfer, ion diffusion, and structural transformation are first discussed, with emphasis on the state-of-art strategies of intercalation and doping with foreign species. Following the obtained insights, applications of modified layered electrode materials in various batteries and supercapacitors are summarized, which may guide the future development of high-performance and low-cost electrode materials for energy storage.

In Situ Construction of Composite Artificial Solid Electrolyte Interphase for High-Performance Lithium Metal Batteries

Lithium metal is considered as the most promising anode material for high energy density secondary batteries due to its high theoretical specific capacity and low redox potential. However, poor interfacial stability and uncontrollable dendrite growth seriously hinder the commercial application of Li metal anodes. Herein, we constructed a composite artificial solid-electrolyte interphase (ASEI) utilizing the in situ reaction between polyacrylic acid (PAA)/stannous fluoride (SnF₂) and lithium metal, which spontaneously generates LiPAA, LiF, and Li₅Sn₂ alloys. The in situ formed LiPAA as a flexible matrix can accommodate the volume change of the lithium anode. Meanwhile, LiF and Li₅Sn₂ play the roles for improving the mechanical properties and boosting Li-ion flux in the interfacial layer, respectively. Benefiting from the ingenious design, the PAA-SnF₂@Li anodes remain stable and dendrite-free morphology in symmetric cells for over 2000 h and exhibit excellent cycling stability in high-area loading (10.52 mg cm^-2) Li||LiFePO₄ full cells with a N/P of 1.68, which endures only 0.11% average capacity decay per cycle in 200 cycles. This simple and low-cost method supplies a route for the commercial application of lithium metal anodes with fresh eyes.

Highlighting the Implantation of Metal Particles into Hollow Cavity Yeast-Based Carbon for Improved Electrochemical Performance of Lithium–Sulfur Batteries

The introduction of metal particles into microbe-based carbon materials for application to lithium–sulfur (Li–S) batteries has the three major advantages of pore formation, chemisorption for polysulfides, and catalysis of electrochemical reactions. Metal particles and high specific surface area are often considered to enhance the properties of Li–S batteries. However, there are few data to support the claim that metal particles implanted in microbe-based carbon hosts can improve Li–S battery performance without interfering with the specific surface area. In this work, hollow-cavity cobalt-embedded yeast-based carbon (HC–Co–YC) with low specific surface area was successfully produced by impregnating yeast cells with a solution containing 0.075 M CoCl2 (designated as HC–Co–YC–0.075M). Cobalt particles implanted in yeast carbon (YC) could improve the conductive properties, lithium-ion diffusion, and cycling stability of the sulfur cathode. Compared to previously reported counterpart electrodes without metal particles, the HC–Co–YC–0.075M/S electrode in this study had a high initial specific capacity of 1061.9 mAh g−1 at 0.2 C, maintained a reversible specific capacity of 504.9 mAh g−1 after 500 cycles, and showed a capacity fading rate of 0.1049% per cycle. In conclusion, the combination of cobalt particles and YC with low specific surface area exhibited better cycle stability, emphasizing the importance of implantation of metal particles into carbon hosts for improving the electrochemical properties of Li–S batteries.

High-Performance Composite Lithium Anodes Enabled by Electronic/Ionic Dual-Conductive Paths for Solid-State Li Metal Batteries

Solid-state lithium metal batteries (SSLMBs) promise high energy density and high safety by employing high-capacity Li metal anode and solid-state electrolytes. However, the construction of the composite Li metal electrode is a neglected but important subject when the extensive research focuses on the interface between the solid electrolyte Li_6.4 La₃ Zr_1.4 Ta_0.6 O₁₂ and Li metal anode. Here, an electronic-ionic conducting composite Li metal anode consisting of Li-Al alloy and LiF is constructed to achieve the stable electronic-ionic transport channel and the intimate interface contact, which can realize the uniform Li deposition and the efficiency utilization of lithium in composite Li metal electrode. Therefore, the symmetric battery with composite Li metal electrode exhibits the high critical current density with 1.2 mA cm^-2 and stable cycle for 1500 h at 0.3 mA cm^-2 , 25 °C. Moreover, the SSLMBs matched with LiFePO₄ and LiNi_0.8 Co_0.1 Mn_0.1 O₂ achieve the outstanding electrochemical performance, verifying the feasibility of composite Li metal electrode in various SSLMBs systems.

Recent Advances in Carbon Anodes for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) have gained tremendous attention for large-scale energy storage applications due to the natural abundance, low cost, and even geographic distribution of sodium resources as well as a similar working mechanism to lithium-ion batteries (LIBs). One of the critical bottlenecks, however, is the design of high-performance and low-cost anode materials. Graphite anode that has dominated the market share of LIBs does not properly intercalate sodium ions. However, other carbonaceous materials are still considered as one of the most promising anode materials for SIBs in virtue of their high electronic conductivity, abundant active sites, hierarchical porosity, and excellent mechanical stability. In this review, we have tried to summarize the latest progresses made on the development of carbon-based negative electrodes (including hard carbons, soft carbons, and synthetic carbon allotropes) for SIBs. We also have provided a comprehensive understanding of their physical properties, the sodium ions storage mechanisms, and the improvement measures to cope with the current challenges. In addition, we have proposed future research directions for SIBs that will provide important insights into further development of carbon-based materials for SIBs.

Electrogenic Bacteria Promise New Opportunities for Powering, Sensing, and Synthesizing

Considerable research efforts into the promises of electrogenic bacteria and the commercial opportunities they present are attempting to identify potential feasible applications. Metabolic electrons from the bacteria enable electricity generation sufficient to power portable or small-scale applications, while the quantifiable electric signal in a miniaturized device platform can be sensitive enough to monitor and respond to changes in environmental conditions. Nanomaterials produced by the electrogenic bacteria can offer an innovative bottom-up biosynthetic approach to synergize bacterial electron transfer and create an effective coupling at the cell-electrode interface. Furthermore, electrogenic bacteria can revolutionize the field of bioelectronics by effectively interfacing electronics with microbes through extracellular electron transfer. Here, these new directions for the electrogenic bacteria and their recent integration with micro- and nanosystems are comprehensively discussed with specific attention toward distinct applications in the field of powering, sensing, and synthesizing. Furthermore, challenges of individual applications and strategies toward potential solutions are provided to offer valuable guidelines for practical implementation. Finally, the perspective and view on how the use of electrogenic bacteria can hold immeasurable promise for the development of future electronics and their applications are presented.

Surpassing the Redox Potential Limit of Organic Cathode Materials via Extended p-π Conjugation of Dioxin

The key to enabling high energy density of organic energy-storage systems is the development of high-voltage organic cathodes; however, the redox voltage (<4.0 V vs Li/Li⁺) of state-of-the-art organic electrode materials (OEMs) remains unsatisfactory. Herein, we propose a novel dibromotetraoxapentacene (DBTOP) redox center to surpass the redox potential limit of OEMs, achieving ultrahigh discharge plateaus of approximately 4.4 V (vs Li⁺/Li). As theoretically analyzed, electron delocalization between dioxin active centers and benzene rings as well as electron-withdrawing bromine atoms endows the molecule with a low occupied molecular orbital level by diluting the electron density of dioxin in the whole p-π conjugated skeleton, and the strong π-π interactions among the DBTOP molecules provide a faster electrochemical kinetic pathway. This tetraoxapentacene redox center makes the working voltage of OEMS closer to the high-voltage inorganic electrodes, and its chemical and structural tunability may stimulate the further development of high-voltage organic cathodes.

Synergistic Effect of WN/Mo2C Embedded in Bioderived Carbon Nanofibers: A Rational Design of a Shuttle Inhibitor and an Electrocatalyst for Lithium-Sulfur Batteries

To improve the innate shuttle effect and the sluggish redox kinetics of lithium-sulfur batteries, a composite made of a bimetallic compound embedded in nitrogen-doped carbon nanofibers (CNFs) is synthesized by employing biomass collagen fibers (CFs) as a structure template. Metal anions WO₄^2- and MoO₄^2- are grafted on plant polyphenol-modified CFs and then in situ converted into WN/Mo₂C implanted in a matrix of CNFs (WMCNFs). The obtained WN/Mo₂C is of quantum size and uniform distribution, exposing the active sites maximally. Further, the heterostructure of the bimetallic composite enables unique electronic interaction, thereby synergistically enhancing its adsorption capability toward soluble intermediates and activating its catalytic function for liquid-liquid and liquid-solid conversions. Combining these merits, when used as a separator modification material and a sulfur host simultaneously, the WMCNFs composite exhibits remarkable cycling stability with 91.45% capacity retention after 500 cycles at 2 C and also prominent rate performance of delivering 552.75 mAh g^-1 at a current rate of 10 C. Meanwhile, the stable luminescence operation of LED lights powered by the assembled pouch cell demonstrates the application potential of this biomaterial-derived composite.