An Electroluminodynamic Flexible Device for Highly Efficient Eradication of Drug-Resistant Bacteria

Membrane Disruption-Enhanced Photodynamic Therapy against Gram-Negative Bacteria by a Peptide-Photosensitizer Conjugate

Photodynamic therapy (PDT) emerges as a promising strategy for combating bacteria with minimal drug resistance. However, a significant hurdle lies in the ineffectiveness of most photosensitizers against Gram-negative bacteria, primarily attributable to their characteristic impermeable outer membrane (OM) barrier. To tackle this obstacle, we herein report an amphipathic peptide-photosensitizer conjugate (PPC) with intrinsic outer membrane disruption capability to enhance PDT efficiency against Gram-negative bacteria. PPC is constructed by conjugating a hydrophilic ultrashort cationic peptide to a hydrophobic photosensitizer. PPC could efficiently bind to the OM of Gram-negative bacteria through electrostatic adsorption, and subsequently disrupt the structural integrity of the OM. Mechanistic investigations revealed that PPC triggers membrane disruption by binding to both lipopolysaccharide (LPS) and phospholipid leaflet in the OM, enabling effective penetration of PPC into the Gram-negative bacteria interior. Upon light irradiation, PPC inside bacteria generates singlet oxygen not only to effectively decrease the survival of Gram-negative bacteria P. aeruginosa and E. coli to nearly zero in vitro, but also successfully cure the full-thickness skin infection and bacterial keratitis (BK) induced by P. aeruginosa in animal models. Thus, this study provides a broad-spectrum antibacterial phototherapeutic design strategy by the synergistic action of membrane disruption and PDT to combat Gram-negative bacteria.

A General Strategy for Enhanced Photodynamic Antimicrobial Therapy with Perylenequinonoid Photosensitizers Using a Macrocyclic Supramolecular Carrier

Perylenequinonoid natural products are a class of photosensitizers (PSs) that exhibit high reactive oxygen species (ROS) generation and excellent activity for Type I/Type II dual photodynamic therapy. However, their limited activity against gram-negative bacteria and poor water solubility significantly restrict their potential in broad-spectrum photodynamic antimicrobial therapy (PDAT). Herein, a general approach to overcome the limitations of perylenequinonoid photosensitizers (PQPSs) in PDAT by utilizing a macrocyclic supramolecular carrier is presented. Specifically, AnBox·4Cl, a water-soluble cationic cyclophane, is identified as a universal macrocyclic host for PQPSs such as elsinochrome C, hypocrellin A, hypocrellin B, and hypericin, forming 1:1 host-guest complexes with high binding constants (≈107 m -1) in aqueous solutions. Each AnBox·4Cl molecule carries four positive charges that promote strong binding with the membrane of gram-negative bacteria. As a result, the AnBox·4Cl-PQPS complexes can effectively anchor on the surfaces of gram-negative bacteria, while the PQPSs alone cannot. In vitro and in vivo experiments demonstrate that these supramolecular PSs have excellent water solubility and high ROS generation, with broad-spectrum PDAT effect against both gram-negative and gram-positive bacteria. This work paves a new path to enhance PDAT by showcasing an efficient approach to improve PQPSs' water solubility and killing efficacy for gram-negative bacteria.

High-Performance Bioinspired Microspheres for Boosting Dental Adhesion

Dental adhesives are widely used in daily practice for minimally invasive restorative dentistry but suffer from bond degradation and biofilm attack. Bio-inspired by marine mussels having excellent surface-adhesion capability and high chemical affinity of polydopamine (PDA) to metal ions, herein, experimental zinc (Zn)-containing polydopamine-based adhesive formulation, further being referred to as "Zn-PDA@SiO2"-incorporated adhesive is proposed as a novel dental adhesive. Different Zn contents (5 and 10 mm) of Zn-PDA@SiO2 are prepared. Considering the synergistic effect of Zn and PDA, Zn-PDA@SiO2 not only presents excellent antibacterial potential and notably inhibits enzymatic activity (soluble and matrix-bound proteases), but also exhibits superior biocompatibility and biosafety in vitro/vivo. The long-term bond stability is substantially improved by adding 5 wt% 5 mm Zn-PDA@SiO2 to the primer. The aged bond strength of the experimentally formulated dental adhesives applied in self-etch (SE) bonding mode is 1.9 times higher than that of the SE gold-standard adhesive. Molecular dynamics calculations indicate the stable formation of covalent bonds, Zn-assisted coordinative bonds, and hydrogen bonds between PDA and collagen. Overall, this bioinspired dental adhesive provides an avenue technology for innovative biomedical applications and has already revealed promising perspectives for dental restorative dentistry.

DHTPY-Cu@ZOL-Enhanced Photodynamic Therapy: A Strategic Platform for Advanced Treatment of Drug-Resistant Bacterial Wound Infections

Purpose

This research was to innovate a nanozyme-based therapeutic strategy that combines aggregation-induced emission (AIE) photosensitizers with copper nanozymes. This approach is designed to address the hypoxic conditions often found in bacterial infections and aims to boost the effectiveness of photodynamic therapy (PDT) by ensuring sufficient oxygen supply for reactive oxygen species (ROS) generation.

Methods

Our approach involved the synthesis of dihydroxyl triphenyl vinyl pyridine (DHTPY)-Cu@zoledronic acid (ZOL) nanozyme particles. We initially synthesized DHTPY and then combined it with copper nanozymes to form the DHTPY-Cu@ZOL composite. The nanozyme's size, morphology, and chemical properties were characterized using various techniques, including dynamic light scattering, transmission electron microscopy, and X-ray photoelectron spectroscopy. We conducted a series of in vitro and in vivo tests to evaluate the photodynamic, antibacterial, and wound-healing properties of the DHTPY-Cu@ZOL nanozymes, including their oxygen-generation capacity, ROS production, and antibacterial efficacy against methicillin-resistant Staphylococcus aureus (MRSA).

Results

The DHTPY-Cu@ZOL exhibited proficient H2O2 scavenging and oxygen generation, crucial for enhancing PDT in oxygen-deprived infection environments. Our in vitro analysis revealed a notable antibacterial effect against MRSA, suggesting the nanozymes' potential to disrupt bacterial cell membranes. Further, in vivo studies using a diabetic rat model with MRSA-infected wounds showed that DHTPY-Cu@ZOL markedly improved wound healing and reduced bacterial presence, underscoring its efficacy as a non-antibiotic approach for chronic infections.

Conclusion

Our study suggests that DHTPY-Cu@ZOL is a highly promising approach for combating antibiotic-resistant microbial pathogens and biofilms. The biocompatibility and stability of these nanozyme particles, coupled with their improved PDT efficacy position them as a promising candidate for clinical applications.

Near-Infrared-II Nanomaterials for Activatable Photodiagnosis and Phototherapy

Near-Infrared-II (NIR-II) spans wavelengths between 1,000 to 1,700 nanometers, featuring deep tissue penetration and reduced tissue scattering and absorption characteristics, providing robust support for cancer treatment and tumor imaging research. This review explores the utilization of activatable NIR-II photodiagnosis and phototherapy based on tumor microenvironments (e. g., reactive oxygen species, pH, glutathione, hypoxia) and external stimulation (e. g., laser, ultrasound, photothermal) for precise tumor treatment and imaging. Special emphasis is placed on the advancements and advantages of activatable NIR-II nanomedicines in novel therapeutic modalities like photodynamic therapy, photothermal therapy, and photoacoustic imaging. This encompasses achieving deep tumor penetration, real-time monitoring of the treatment process, and obtaining high-resolution, high signal-to-noise ratio images even at low material concentrations. Lastly, from a clinical perspective, the challenges faced by activatable NIR-II phototherapy are discussed, alongside potential strategies to overcome these hurdles.

pH-Responsive antibacterial metal-phenolic network coating on hernia meshes

Polypropylene (PP) mesh is widely used in hernioplasty, but it is prone to contamination by pathogenic bacteria. Here, we present an infection microenvironment-responsive metal-phenolic network (MPN) coating, which is made up of Cu2+ and tannic acid (TA) (referred to as CT coating), and is fabricated on PP meshes by layer-by-layer (LbL) assembly. The CT coating provided a robust protection for the PP mesh from pathogenic bacterial infection in a pH-responsive manner due to the pH-responsive disassembly kinetics of MPN complexes. Moreover, the PP meshes with ten CT coating cycles (PP-CT(10)) exhibited excellent stability in a physiological environment, with the killing ratio against "superbug" methicillin-resistant Staphylococcus aureus (MRSA) at pH 5.5 exceeding 99% even after 28 days of PBS (pH 7.4) immersion. In addition, the PP-CT(10) exhibited excellent in vivo anti-infective ability in a rodent subcutaneous implant MRSA infection model, and the results of histological and immunohistochemical analyses demonstrated that the reduced bacterial number alleviated the inflammatory response at implant sites. This study revealed that MPN coating is a promising strategy, which could provide a self-defensive ability for various implants to combat post-surgical infections in a pH-responsive manner.

Interdisciplinary-Inspired Smart Antibacterial Materials and Their Biomedical Applications

The discovery of antibiotics has saved millions of lives, but the emergence of antibiotic-resistant bacteria has become another problem in modern medicine. To avoid or reduce the overuse of antibiotics in antibacterial treatments, stimuli-responsive materials, pathogen-targeting nanoparticles, immunogenic nano-toxoids, and biomimetic materials are being developed to make sterilization better and smarter than conventional therapies. The common goal of smart antibacterial materials (SAMs) is to increase the antibiotic efficacy or function via an antibacterial mechanism different from that of antibiotics in order to increase the antibacterial and biological properties while reducing the risk of drug resistance. The research and development of SAMs are increasingly interdisciplinary because new designs require the knowledge of different fields and input/collaboration from scientists in different fields. A good understanding of energy conversion in materials, physiological characteristics in cells and bacteria, and bactericidal structures and components in nature are expected to promote the development of SAMs. In this review, the importance of multidisciplinary insights for SAMs is emphasized, and the latest advances in SAMs are categorized and discussed according to the pertinent disciplines including materials science, physiology, and biomimicry.

Designing Ultratough Single-Network Hydrogels with Centimeter-Scale Fractocohesive Lengths via Inelastic Crack Blunting

Fractocohesive length, defined as the ratio of fracture toughness to work of fracture, measures the sensitivity of materials to fracture in the presence of flaws. The larger the fractocohesive length, the more flaw-tolerant and crack-resistant the hydrogel. For synthetic soft materials, the fractocohesive length is short, often on the scale of 1 mm. Here, highly flaw-insensitive (HFI) single-network hydrogels containing an entangled inhomogeneous polymer network of widely distributed chain lengths are designed. The HFI hydrogels demonstrate a centimeter-scale fractocohesive length of 2.21 cm, which is the highest ever recorded for synthetic hydrogels, and an unprecedented fracture toughness of ≈13 300 J m-2 . The uncommon flaw insensitivity results from the inelastic crack blunting inherent to the highly inhomogeneous network. When the HFI hydrogel is stretched, a large number of short chains break while coiled long chains can disentangle, unwind, and straighten, producing large inelastic deformation that substantially blunts the crack tip in a plastic manner, thereby deconcentrating crack-tip stresses and blocking crack extension. The flaw-insensitive design strategy is applicable to various hydrogels such as polyacrylamide and poly(N,N-dimethylacrylamide) hydrogels and enables the development of HFI soft composites.

GSH/pH Cascade-Responsive Nanoparticles Eliminate Methicillin-Resistant Staphylococcus aureus Biofilm via Synergistic Photo-Chemo Therapy

Bacterial biofilm infection threatens public health, and efficient treatment strategies are urgently required. Phototherapy is a potential candidate, but it is limited because of the off-targeting property, vulnerable activity, and normal tissue damage. Herein, cascade-responsive nanoparticles (NPs) with a synergistic effect of phototherapy and chemotherapy are proposed for targeted elimination of biofilms. The NPs are fabricated by encapsulating IR780 in a polycarbonate-based polymer that contains disulfide bonds in the main chain and a Schiff-base bond connecting vancomycin (Van) pendants in the side chain (denoted as SP-Van@IR780 NPs). SP-Van@IR780 NPs specifically target bacterial biofilms in vitro and in vivo by the mediation of Van pendants. Subsequently, SP-Van@IR780 NPs are decomposed into small size and achieve deep biofilm penetration due to the cleavage of disulfide bonds in the presence of GSH. Thereafter, Van is then detached from the NPs because the Schiff base bonds are broken at low pH when SP@IR780 NPs penetrate into the interior of biofilm. The released Van and IR780 exhibit a robust synergistic effect of chemotherapy and phototherapy, strongly eliminate the biofilm both in vitro and in vivo. Therefore, these biocompatible SP-Van@IR780 NPs provide a new outlook for the therapy of bacterial biofilm infection.

Wet-Adaptive Electronic Skin

Skin electronics provides remarkable opportunities for non-invasive and long-term monitoring of a wide variety of biophysical and physiological signals that are closely related to health, medicine, and human-machine interactions. Nevertheless, conventional skin electronics fabricated on elastic thin films are difficult to adapt to the wet microenvironments of the skin: Elastic thin films are non-permeable, which block the skin perspiration; Elastic thin films are difficult to adhere to wet skin; Most skin electronics are difficult to work underwater. Here, a Wet-Adaptive Electronic Skin (WADE-skin) is reported, which consists of a next-to-skin wet-adhesive fibrous layer, a next-to-air waterproof fibrous layer, and a stretchable and permeable liquid metal electrode layer. While the electronic functionality is determined by the electrode design, this WADE-skin simultaneously offers superb stretchability, wet adhesion, permeability, biocompatibility, and waterproof property. The WADE-skin can rapidly adhere to human skin after contact for a few seconds and stably maintain the adhesion over weeks even under wet conditions, without showing any negative effect to the skin health. The use of WADE-skin is demonstrated for the stable recording of electrocardiogram during intensive sweating as well as underwater activities, and as the strain sensor for the underwater operation of virtual reality-mediated human-machine interactions.

Beyond External Light: On-Spot Light Generation or Light Delivery for Highly Penetrated Photodynamic Therapy

External light sources, such as lasers, light emitting diodes (LEDs) and lamps, are widely applied in photodynamic therapy (PDT); however, their use is severely limited by the nature of shallow tissue penetration depth. The recent exploration of light delivery or local generation on tumor sites has attracted much attention, owing to the fact that these systems are significantly endowed with high tissue penetration. In this review, we briefly introduced the principle of "on-spot light generation or delivery systems" in PDT. These systems are divided into different categories: (1) implantable luminescence, (2) mechanoluminescence, (3) electrochemiluminescence, (4) Cerenkov luminescence, (5) chemiluminescence, and (6) bioluminescence. Finally, their applications, advantages, and disadvantages in PDT will be appropriately summarized and further discussed in detail. We believe that this review will provide general guidance for the further design of light generation or delivery systems and clinical studies for PDT-mediated cancer treatments with unparalleled merits.

Escherichia coli-Based In Situ Triggerable Probe as an Amplifier for Sensitive Diagnosis and Penetrated Therapy of Cancer

Escherichia coli (E. coli) was used for cancer therapy due to the tumor-targeting, catalytic, and surface-reducing properties. Effective diagnosis combined with treatment of cancer based on E. coli, however, was rarely demonstrated. In this study, E. coli was used to surface reduce HAuCl4 and as a carrier to modify riboflavin (Rf) and luminol (E-Au@Rf@Lum). After targeted delivery to tumor, the E-Au@Rf@Lum probe could actively emit 425 nm blue-violet chemiluminescence (CL) to achieve cell imaging for cancer diagnosis. Furthermore, this light could in situ trigger the photosensitizer (Rf) through CL resonance energy transfer, which produces reactive oxygen species (ROS) for accurate photodynamic therapy. In return, the excessive ROS enhanced the blue-violet light which was further absorbed by Rf, and ROS production was cyclically amplified. Abundant ROS broke down the dense extracellular matrix network and penetrated deep into tumors. Besides, E. coli with excellent catalytic property could decompose H2O2 to O2 to relieve tumor hypoxia for a long time and enhance the photosensitized process of Rf. By self-illumination, effective penetration, and tumor hypoxia relief, this work opens a self-amplified therapy modality to tumor.

A 0D-2D Heterojunction Bismuth Molybdate-Anchored Multifunctional Hydrogel for Highly Efficient Eradication of Drug-Resistant Bacteria

Due to the increasing antibiotic resistance and the lack of broad-spectrum antibiotics, there is an urgent requirement to develop fresh strategies to combat multidrug-resistant pathogens. Herein, defect-rich bismuth molybdate heterojunctions [zero-dimensional (0D) Bi4MoO9/two-dimensional (2D) Bi2MoO6, MBO] were designed for rapid capture of bacteria and synergistic photocatalytic sterilization. The as-prepared MBO was experimentally and theoretically demonstrated to possess defects, heterojunctions, and irradiation triple-enhanced photocatalytic activity for efficient generation of reactive oxygen species (ROS) due to the exposure of more active sites and separation of effective electron-hole pairs. Meanwhile, dopamine-modified MBO (pMBO) achieved a positively charged and rough surface, which conferred strong bacterial adhesion and physical penetration to the nanosheets, effectively trapping bacteria within the damage range and enhancing ROS damage. Based on this potent antibacterial ability of pMBO, a multifunctional hydrogel consisting of poly(vinyl alcohol) cross-linked tannic acid-coated cellulose nanocrystals (CPTB) and pMBO, namely CPTB@pMBO, is developed and convincingly effective against methicillin-resistant Staphylococcus aureus in a mouse skin infection model. In addition, the strategy of combining a failed beta-lactam antibiotic with CPTB@pMBO to photoinactivation with no resistance observed was developed, which presented an idea to address the issue of antibiotic resistance in bacteria and to explore facile anti-infection methods. In addition, CPTB@pMBO can reduce excessive proteolysis of tissue and inflammatory response by regulating the expression of genes and pro-inflammatory factors in vivo, holding great potential for the effective treatment of wound infections caused by drug-resistant bacteria.

An injectable MB/BG@LG sustained release lipid gel with antibacterial and osteogenic properties for efficient treatment of chronic periodontitis in rats

Periodontitis is a chronic inflammatory disease characterized by the colonization of pathogenic microorganisms and the loss of periodontal supporting tissue. However, the existing local drug delivery system for periodontitis has some problems including subpar antibacterial impact, easy loss, and unsatisfactory periodontal regeneration. In this study, a multi-functional and sustained release drug delivery system (MB/BG@LG) was developed by encapsulating methylene blue (MB) and bioactive glass (BG) into the lipid gel (LG) precursor by Macrosol technology. The properties of MB/BG@LG were characterized using a scanning electron microscope, a dynamic shear rotation rheometer, and a release curve. The results showed that MB/BG@LG could not only sustained release for 16 days, but also quickly fill the irregular bone defect caused by periodontitis through in situ hydration. Under 660 ​nm light irradiation, methylene blue-produced reactive oxygen species (ROS) can reduce local inflammatory response by inhibiting bacterial growth. In addition, in vitro and vivo experiments have shown that MB/BG@LG can effectively promote periodontal tissue regeneration by reducing inflammatory response, promoting cell proliferation and osteogenic differentiation. In summary, MB/BG@LG exhibited excellent adhesion properties, self-assembly properties, and superior drug release control capabilities, which improved the clinical feasibility of its application in complex oral environments.

A "Test-to-Treat" Pad for Real-Time Visual Monitoring of Bacterial Infection and On-Site Performing Smart Therapy Strategies

Skin infections are major threats to human health, causing ∼500 incidences per 10 000 person-year. In patients with diabetes mellitus, particularly, skin infections are often accompanied by a slow healing process, amputation, and even death. Timely diagnosis of skin infection strains and on-site therapy are vital in human health and safety. Herein, a double-layered "test-to-treat" pad is developed for the visual monitoring and selective treatment of drug-sensitive (DS)/drug-resistant (DR) bacterial infections. The inner layer (using carrageenan hydrogel as a scaffold) is loaded with bacteria indicators and an acid-responsive drug (Fe-carbenicillin frameworks) for infection detection and DS bacteria inactivation. The outer layer is a mechanoluminescence material (ML, CaZnOS:Mn²⁺) and visible-light responsive photocatalyst (Pt@TiO₂) incorporated elastic polydimethylsiloxane (PDMS). On the basis of the colorimetric sensing result (yellow for DS-bacterial infection and red for DR-bacterial infection), a suitable antibacterial strategy is guided and then performed. Two available bactericidal routes provided by double pad layers reflect the advantage. The controllable and effective killing of DR bacteria is realized by in situ generated reactive oxygen species (ROSs) from the combination of Pt@TiO₂ and ML under mechanical force, avoiding physical light sources and alleviating off-target side effects of ROS in biomedical therapy. As a proof-of-concept, the "test-to-treat" pad is applied as a wearable wound dressing for sensing and selectively dealing with DS/DR bacterial infections in vitro and in vivo. This multifunctional design effectively reduces antibiotic abuse and accelerates wound healing, providing an innovative and promising Band-Aid strategy in point-of-care diagnosis and therapy.

Recent Advances in Strategies to Combat Bacterial Drug Resistance: Antimicrobial Materials and Drug Delivery Systems

Bacterial infection is a common clinical disease. Antibiotics have saved countless lives since their discovery and are a powerful weapon in the fight against bacteria. However, with the widespread use of antibiotics, the problem of drug resistance now poses a great threat to human health. In recent years, studies have investigated approaches to combat bacterial resistance. Several antimicrobial materials and drug delivery systems have emerged as promising strategies. Nano-drug delivery systems for antibiotics can reduce the resistance to antibiotics and extend the lifespan of novel antibiotics, and they allow targeting drug delivery compared to conventional antibiotics. This review highlights the mechanistic insights of using different strategies to combat drug-resistant bacteria and summarizes the recent advancements in antimicrobial materials and drug delivery systems for different carriers. Furthermore, the fundamental properties of combating antimicrobial resistance are discussed, and the current challenges and future perspectives in this field are proposed.

Water-soluble conjugated polymers for bioelectronic systems

Bioelectronics is an interdisciplinary field of research that aims to establish a synergy between electronics and biology. Contributing to a deeper understanding of bioelectronic processes and the built bioelectronic systems, a variety of new phenomena, mechanisms and concepts have been derived in the field of biology, medicine, energy, artificial intelligence science, etc. Organic semiconductors can promote the applications of bioelectronics in improving original performance and creating new features for organisms due to their excellent photoelectric and electrical properties. Recently, water-soluble conjugated polymers (WSCPs) have been employed as a class of ideal interface materials to regulate bioelectronic processes between biological systems and electronic systems, relying on their satisfying ionic conductivity, water-solubility, good biocompatibility and the additional mechanical and electrical properties. In this review, we summarize the prominent contributions of WSCPs in the aspect of the regulation of bioelectronic processes and highlight the latest advances in WSCPs for bioelectronic applications, involving biosynthetic systems, photosynthetic systems, biophotovoltaic systems, and bioelectronic devices. The challenges and outlooks of WSCPs in designing high-performance bioelectronic systems are also discussed.

Specific Chemiluminescence Imaging and Enhanced Photodynamic Therapy of Bacterial Infections by Hemin-Modified Carbon Dots

Antibacterial photodynamic therapy (aPDT) is a promising antibiotics-alternative strategy for bacterial infectious diseases, which features broad-spectrum antibacterial activity with a low risk of inducing bacterial resistance. However, clinical applications of aPDT are still hindered by the hydrophobicity-caused inadequate photodynamic activity of conventional photosensitizers and the hypoxic microenvironment of bacterial infections. To address these problems, herein, a promising strategy is developed to achieve specific chemiluminescence (CL) imaging and enhanced PDT of bacterial infections using hemin-modified carbon dots (H-CDs). The H-CDs can be facilely prepared and exhibit favorable water solubility, augmented photodynamic activity, and unique peroxidase-mimicking capacity. Compared with the free CDs, the photodynamic efficacy of H-CDs is significantly augmented due to the increased electron-hole separation efficiency. Moreover, the peroxidase catalytic performance of H-CDs enables not only infection identification via bacterial infection microenvironment-responsive CL imaging but also oxygen self-supplied aPDT with hypoxia-relief-enhanced bacteria inactivation effects. Finally, the enhanced aPDT efficiencies of H-CDs are validated in both in vivo abscess and infected wound models. This work may provide an effective antibacterial platform for the selective imaging-guided treatment of bacterial infections.

Recent advances in responsive antibacterial materials: design and application scenarios

Bacterial infection is one of the leading causes of death globally, although modern medicine has made considerable strides in the past century. As traditional antibiotics are suffering from the emergence of drug resistance, new antibacterial strategies are of great interest. Responsive materials are appealing alternatives that have shown great potential in combating resistant bacteria and avoiding the side effects of traditional antibiotics. In this review, the responsive antibacterial materials are introduced in terms of stimulus signals including intrinsic (pH, enzyme, ROS, etc.) and extrinsic (light, temperature, magnetic fields, etc.) stimuli. Their biomedical applications in therapeutics and medical devices are then discussed. Finally, the author's perspective of the challenge and the future of such a system is provided.

Unveiling upsurge of photogenerated ROS: control of intersystem crossing through tuning aggregation patterns

Photo-induced reactive oxygen species (ROS) generation by organic photosensitizers (PSs), which show potential in significant fields such as photodynamic therapy (PDT), are highly dependent on the formation of the excited triplet state through intersystem crossing (ISC). The current research on ISC of organic PSs generally focuses on molecular structure optimization. In this manuscript, the influence of aggregation patterns on ISC was investigated by constructing homologous monomers (S-TPA-PI and L-TPA-PI) and their homologous dimers (S-2TPA-2PI and L-2TPA-2PI). In contrast to J-aggregated S-TPA-PI, S-2TPA-2PI-aggregate forming "end-to-end" stacking through π-π interaction could generate ROS more efficiently, due to a prolonged exciton lifetime and enhanced ISC rate constant (k _ISC), which were revealed by femtosecond transient absorption spectroscopy and theoretical calculations. This finding was further validated by the regulation of aggregation patterns induced by host-guest interaction. Moreover, S-2TPA-2PI could target mitochondria and achieve rapid mitophagy to cause more significant cancer cell suppression. Overall, the delicate supramolecular dimerization tactics not only revealed the structure-property relationship of organic PSs but also shed light on the development of a universal strategy in future PDT and photocatalysis fields.

Peroxidase-like MoS2/Ag nanosheets with synergistically enhanced NIR-responsive antibacterial activities

Pathogenic microbial infections have been threatening public health all over the world, which makes it highly desirable to develop an antibiotics-free material for bacterial infection. In this paper, molybdenum disulfide (MoS₂) nanosheets loaded with silver nanoparticles (Ag NPs) were constructed to inactive bacteria rapidly and efficiently in a short period under a near infrared (NIR) laser (660 nm) in the presence of H₂O₂. The designed material presented favorable features of peroxidase-like ability and photodynamic property, which endowed it with fascinating antimicrobial capacity. Compared with free MoS₂ nanosheets, the MoS₂/Ag nanosheets (denoted as MoS₂/Ag NSs) exhibited better antibacterial performance against Staphylococcus aureus by the generated reactive oxygen species (ROS) from both peroxidase-like catalysis and photodynamic, and the antibacterial efficiency of MoS₂/Ag NSs could be further improved by increasing the amount of Ag. Results from cell culture tests proved that MoS₂/Ag3 nanosheets had a negligible impact on cell growth. This work provided new insight into a promising method for eliminating bacteria without using antibiotics, and could serve as a candidate strategy for efficient disinfection to treat other bacterial infections.

NIR-responsive MoS2-Cu2WS4 nanosheets for catalytic/photothermal therapy of methicillin-resistant Staphylococcus aureus infections

The extensive usage of antibiotics causes the rapid evolution of drug-resistant bacteria, which seriously threaten human health. Thus, efficient strategies for treating drug-resistant bacterial infections are urgently needed. Herein, MoS₂-Cu₂WS₄ nanosheets (MS-CWS NSs) are prepared as a near-infrared (NIR) light responsive nanozyme to effectively combat methicillin-resistant Staphylococcus aureus (MRSA) infections by catalytic/photothermal effects. By integrating oxidase (OXD)- and peroxidase (POD)-mimic catalytic activity, MS-CWS NSs have the ability to inactivate MRSA without the addition of H₂O₂. Moreover, the reactive oxygen species (ROS) produced from MS-CWS NSs are further enhanced by NIR light irradiation, which remarkably causes the death of MRSA. MS-CWS NSs show 4.4 log (99.996%) bacterial inactivation efficiency of MRSA in vitro under NIR light irradiation (0.8 W cm^-2, 5 min). In an MRSA infected wound mouse model, MS-CWS NSs inactivate the MRSA by more than 5.2 log (>99.999%) and effectively promote wound healing. This work provides an NIR-responsive 2D nanozyme for efficient treatment of MRSA infections.

Photodynamic therapy and combinatory treatments for the control of biofilm-associated infections

The advent of antimicrobial resistance has added considerable impact to infectious diseases both in the number of infections and healthcare costs. Furthermore, the relentless emergence of multidrug-resistant bacteria, particularly in the biofilm state, has made mandatory the discovery of new alternative antimicrobial therapies that are capable to eradicate resistant bacteria and impair the development of new forms of resistance. Amongst the therapeutic strategies for treating biofilms, antimicrobial photodynamic therapy (aPDT) has shown great potential in inactivating several clinically relevant micro-organisms, including antibiotic-resistant 'priority bacteria' declared by the WHO as critical pathogens. Its antimicrobial effect is centred on the basis that harmless low-intensity light stimulates a non-toxic dye named photosensitizer, triggering the production of reactive oxygen species upon photostimulation. In addition, combination therapies of aPDT with other antimicrobial agents (e.g. antibiotics) have also drawn considerable attention, as it is a multi-target strategy. Therefore, the present review highlights the recent advances of aPDT against biofilms, also covering progress on combination therapy.