Modified MXene/Holey Graphene Films for Advanced Supercapacitor Electrodes with Superior Energy Storage

Interface engineering based NiCoMoO4/Ti3C2Tx MXene heterostructure for high-performance flexible supercapacitors

The advancement of interface engineering has demonstrated remarkable efficacy in overcoming the primary impediment associated with sluggish reaction kinetics in supercapacitor electrodes. In this investigation, we employed a facile co-precipitation method to synthesize NiCoMoO4/MXene heterostructures utilizing Ti3C2Tx MXene nanosheets as carriers. This heterostructure inhibits the restacking of MXene nanosheets and simultaneously enhances the exposure of electrochemically active sites in NiCoMoO4 nanorods, thereby mitigating the reduction in specific capacitance resulting from volumetric fluctuations. The NiCoMoO4/MXene electrode, possessing pseudo-capacitance properties, demonstrates an impressive level of specific capacitance, exceptional performance across various charging rates, and consistent behavior throughout repeated cycles. By optimizing the mass ratio, this electrode achieves a specific capacity of 1900 F/g under a current density of 1 A/g. Even after enduring 10,000 cycles at a significantly higher current density of 5 A/g, it still maintains an impressive retention rate of 94.73 %. Our density functional theory (DFT) calculations indicate that the enhanced electrochemical performance can be attributed to the improved electronic coupling within the NiCoMoO4/MXene heterostructure. The integration of NiCoMoO4/MXene cathode and activated carbon (AC) anode with an alkaline gel electrolyte containing potassium ferricyanide in flexible quasi-solid-state supercapacitors (FSSCs) results in exceptional electrochemical performance and flexibility. These FSSCs demonstrate a maximum energy density of 72.89 Wh kg-1 at a power density of 850 W kg-1, while maintaining an impressive power output of 16,780 W kg-1 with an energy density of 37.28 Wh kg-1. Based on these outstanding properties, it is evident that the NiCoMoO4/MXene heterojunction possesses significant advantages as electrode material for supercapacitors, and the fabricated FSSCs devices pave a new pathway for flexible electronic devices.

Modulating Electrochemical Energy Storage and Multi-Spectra Defense of MXenes by Interfacial Dual-Filler Engineering

MXenes have attracted growing interest in electrochemical energy storage owing to their high electronic conductivity and editable surface chemistry. Besides, rendering MXenes with spectrum defense properties further broadens their versatile applications. However, the development of MXenes suffers from weak van der Waal interaction-driven self-restacking that leads to random alignment and inferior interface microenvironments. Herein, a nacre-inspired MXene film is tailored by dual-filling of 2-ureido-4[1H]-pyrimidinone (UPy)-modified polyvinyl alcohol (PVA-UPy) and carbon nanotubes (CNTs). The dual-nanofillers engineering endows the nanocomposite film with a highly ordered structure (a Herman's order value of 0.838), a high mechanical strength (139.5 MPa), and continuous conductive pathways of both the ab plane and c-axis. As a proof-of-concept, the tailored nanocomposite film achieves a considerable capacitance of 508.2 F cm-3 and long-term cycling stability without performance degradation for 10 000 cycles. It is efficient for spectra defense in radar and infrared bands, displaying a high electromagnetic shielding capacity (19186 dB cm2 g-1) and a super-low infrared (IR) emissivity (0.16), with negligible performance decay after saving in the air for 1 year, responsible for the applications in specific and complex conditions. This interfacial dual-filler engineering concept showcases effective nanotechnology toward sustainable energy applications with a long lifetime and safety.

Harnessing Holey MXene/Graphene Oxide Heterostructure to Maximize Ion Channels in Lamellar Film for High-Performance Capacitive Deionization

2D Ti3C2Tx MXene-based film electrodes with metallic conductivity and high pseudo-capacitance are of considerable interest in cutting-edge research of capacitive deionization (CDI). Further advancement in practical use is however impeded by their intrinsic limitations, e.g., tortuous ion diffusion pathway of layered stacking, vulnerable chemical stability, and swelling-prone nature of hydrophilic MXene nanosheet in aqueous environment. Herein, a nanoporous 2D/2D heterostructure strategy is established to leverage both merits of holey MXene (HMX) and holey graphene oxide (HGO) nanosheets, which optimize ion transport shortcuts, alleviate common restacking issues, and improve film's mechanical and chemical stability. In this design, the nanosized in-plane holes in both handpicked building blocks build up ion diffusion shortcuts in the composite laminates to accelerate the transport and storage of ions. As a direct outcome, the HMX/rHGO films exhibit remarkable desalination capacity of 57.91 mg g-1 and long-term stability in 500 mg L-1 NaCl solution at 1.2 V. Moreover, molecular dynamics simulations and ex situ wide angle X-ray scattering jointly demonstrate that the conductive 2D/2D networks and ultra-short ion diffusion channels play critical roles in the ion intercalation/deintercalation process of HMX/rHGO films. The study paves an alternative design concept of freestanding CDI electrodes with superior ion transport efficiency.

Gradient-Layered MXene/Hollow Lignin Nanospheres Architecture Design for Flexible and Stretchable Supercapacitors

With the rapid development of flexible wearable electronics, the demand for stretchable energy storage devices has surged. In this work, a novel gradient-layered architecture was design based on single-pore hollow lignin nanospheres (HLNPs)-intercalated two-dimensional transition metal carbide (Ti3C2Tx MXene) for fabricating highly stretchable and durable supercapacitors. By depositing and inserting HLNPs in the MXene layers with a bottom-up decreasing gradient, a multilayered porous MXene structure with smooth ion channels was constructed by reducing the overstacking of MXene lamella. Moreover, the micro-chamber architecture of thin-walled lignin nanospheres effectively extended the contact area between lignin and MXene to improve ion and electron accessibility, thus better utilizing the pseudocapacitive property of lignin. All these strategies effectively enhanced the capacitive performance of the electrodes. In addition, HLNPs, which acted as a protective phase for MXene layer, enhanced mechanical properties of the wrinkled stretchable electrodes by releasing stress through slip and deformation during the stretch-release cycling and greatly improved the structural integrity and capacitive stability of the electrodes. Flexible electrodes and symmetric flexible all-solid-state supercapacitors capable of enduring 600% uniaxial tensile strain were developed with high specific capacitances of 1273 mF cm-2 (241 F g-1) and 514 mF cm-2 (95 F g-1), respectively. Moreover, their capacitances were well preserved after 1000 times of 600% stretch-release cycling. This study showcased new possibilities of incorporating biobased lignin nanospheres in energy storage devices to fabricate stretchable devices leveraging synergies among various two-dimensional nanomaterials.

Acidic "Water-in-Salt" Electrolyte Enables a High-Energy Symmetric Supercapacitor Based on Titanium Carbide MXene

Titanium carbide MXene, Ti3C2Tx, exhibits ultrahigh capacitance in acidic electrolytes at negative potentials yet poor stability at positive potentials, resulting in low-energy densities for Ti3C2Tx-based symmetric supercapacitors. Utilizing "water-in-salt" electrolytes has successfully expanded the stable operation potential window of MXenes. However, this advancement comes at the cost of sacrificing their high capacitance in acidic electrolytes. In this work, we report an acidic "water-in-salt" (AWIS) electrolyte composed of sulfuric acid and saturated lithium halide, which effectively doubled the energy density of the Ti3C2Tx-based symmetric supercapacitor compared to those with bare acidic electrolytes. Specifically, the AWIS electrolyte successfully expanded the voltage window of the symmetric device to 1.1 V. A high specific capacitance of 112.34 F g-1 (at 10 mV s-1) was obtained due to the presence of proton redox. As a result, the symmetric device achieved a high-energy density of 19.1 Wh kg-1 and a high capacitance retention of 96.3% after 10,000 cycles. This work demonstrates the importance of designing stable and redox-active electrolytes for high-energy MXene-based symmetric supercapacitors.

Tunable magnetism in nitride MXenes: consequences of atomic layer stacking

We have performed density functional theory (DFT) based calculations to investigate the effects of stacking patterns on the electronic and magnetic properties of several nitride MXenes. MXenes, a relatively new addition to the family of two-dimensional materials, have exhibited fascinating properties in several occasions, primarily due to their compositional flexibility. However, compared to carbide MXenes, nitride MXenes are much less explored. Moreover, the structural aspects of MXenes and the tunability they may offer have not been explored until recently. In this work, we have combined these two less-explored aspects to examine the structure-property relationships in the field of magnetism. We find that in the family of M2NT2 (M = Sc, Ti, V, Cr, Mn; T = O, F) MXenes, the stacking of transition metal planes has a substantial effect on the ground state and finite temperature magnetic properties. We also find that the electronic ground states can be tuned by changing the stacking pattern in these compounds, making the materials appropriate for applications as magnetic devices. Through a detailed analysis, we have connected the unconventional stacking pattern-driven tunability of these compounds with regard to electronic and magnetic properties to the local symmetry, inhomogeneity (or lack of it) of structural parameters, and electronic structures.

Longevous Protic Hybrid Supercapacitors Using Bimetallic Prussian Blue Analogue/rGO-Based Nanocomposite Against MXene Anode

MXenes exhibit a unique combination of properties-2D structure, high conductivity, exceptional capacity, and chemical resistance-making them promising candidates for hybrid supercapacitors (HSCs). However, the development of MXene-based HSCs is often hindered by the limited availability of cathode materials that deliver comparable electrochemical performance, especially in protic electrolytes. In this study, this challenge is addressed by introducing a durable protic HSC utilizing a bimetallic Prussian Blue Analogue (PBA) decorated on reduced graphene oxide (rGO) as a nanocomposite cathode paired with a single-layered Ti3C2Tx MXene (SL-MXene) anode. The bimetallic PBA, specifically nickel hexacyanocobaltate (NiHCC), is utilized by virtue of its open and stable structure that facilitates efficient charge storage, leading to enhanced stability and energy storage capabilities. The resulting NiHCC/rGO//SL-MXene cell demonstrates impressive performance, achieving a maximum specific energy of 38.03 Wh kg-1 and a power density of 20 666.67 W kg-1. Remarkably, the NiHCC/rGO//SL-MXene HSC cell also exhibits excellent cycling stability without any loss even after 15 000 cycles while retaining ≈100% coulombic efficiency. This work underscores the potential of bimetallic PBA materials with conductive rGO backbone for overcoming the limitations of current MXene-based protic HSCs, highlighting the significance of this work.

Activating Ion Channels in Collapsed Hydrogel Derived Densified MXene Films with Cellulose Nanofibers to Overcome the Areal Versus Volumetric Capacitance Trade-Off

Concomitant achievement of all three performance pillars of a supercapacitor device, namely gravimetric, areal, and volumetric capacitance is a grand challenge. Nevertheless, its fulfilment is indispensable for commercial usage. Although, high compactness is the fundamental requirement to achieve high volumetric performance, it severely affects ion transportation in thick electrodes. Such trade-off makes it extremely challenging to realize very high areal and volumetric performance simultaneously. Here, a collapsed hydrogel strategy is introduced to develop MXene/cellulose nanofiber (CNF) based densified electrodes that offer excellent ion transportation despite a massive increase in areal mass loading (>70 mg cm-2). Quasi-oriented MXene/CNF (MXCF) hydrogels are produced through an electric field-guided co-assembly technique. Ambient dehydration of these hydrogels incorporates numerous pores in the resultant compact electrodes due to crumpling of the MXene sheets, while CNF ensures connectivity among the locally blocked pores in different length scales. The resultant collapsed MXCF densified electrode shows a remarkably high areal capacitance of 16 F cm-2 while simultaneously displaying a high volumetric capacitance of 849.8 F cm-3 at an ultrahigh mass loading of up to 73.4 mg cm-2. The universality of strategy, including the co-assembly of hydrogel and its collapse, is further demonstrated to develop high-performance asymmetric and wearable devices.

Hybrid and Asymmetric Supercapacitors: Achieving Balanced Stored Charge across Electrode Materials

An electrochemical capacitor configuration extends its operational potential window by leveraging diverse charge storage mechanisms on the positive and negative electrodes. Beyond harnessing capacitive, pseudocapacitive, or Faradaic energy storage mechanisms and enhancing electrochemical performance at high rates, achieving a balance of stored charge across electrodes poses a significant challenge over a wide range of charge-discharge currents or sweep rates. Consequently, fabricating hybrid and asymmetric supercapacitors demands precise electrochemical evaluations of electrode materials and the development of a reliable methodology. This work provides an overview of fundamental aspects related to charge-storage mechanisms and electrochemical methods, aiming to discern the contribution of each process. Subsequently, the electrochemical properties, including the working potential windows, rate capability profiles, and stabilities, of various families of electrode materials are explored. It is then demonstrated, how charge balancing between electrodes falters across a broad range of charge-discharge currents or sweep rates. Finally, a methodology for achieving charge balance in hybrid and asymmetric supercapacitors is proposed, outlining multiple conditions dependent on loaded mass and charge-discharge current. Two step-by-step tutorials and model examples for applying this methodology are also provided. The proposed methodology is anticipated to stimulate continued dialogue among researchers, fostering advancements in achieving stable and high-performance supercapacitor devices.

The Rise of Xene Hybrids

Xenes, mono-elemental atomic sheets, exhibit Dirac/Dirac-like quantum behavior. When interfaced with other 2D materials such as boron nitride, transition metal dichalcogenides, and metal carbides/nitrides/carbonitrides, it enables them with unique physicochemical properties, including structural stability, desirable bandgap, efficient charge carrier injection, flexibility/breaking stress, thermal conductivity, chemical reactivity, catalytic efficiency, molecular adsorption, and wettability. For example, BN acts as an anti-oxidative shield, MoS2 injects electrons upon laser excitation, and MXene provides mechanical flexibility. Beyond precise compositional modulations, stacking sequences, and inter-layer coupling controlled by parameters, achieving scalability and reproducibility in hybridization is crucial for implementing these quantum materials in consumer applications. However, realizing the full potential of these hybrid materials faces challenges such as air gaps, uneven interfaces, and the formation of defects and functional groups. Advanced synthesis techniques, a deep understanding of quantum behaviors, precise control over interfacial interactions, and awareness of cross-correlations among these factors are essential. Xene-based hybrids show immense promise for groundbreaking applications in quantum computing, flexible electronics, energy storage, and catalysis. In this timely perspective, recent discoveries of novel Xenes and their hybrids are highlighted, emphasizing correlations among synthetic parameters, structure, properties, and applications. It is anticipated that these insights will revolutionize diverse industries and technologies.

Revealing the Two-Stage Charging Process in Sulfuric Acid Electrolyte by Molecular Dynamics Simulation

Two-dimensional MXene materials perform excellently in supercapacitor applications, but self-stacking and overlap limit their applications. Constructing a reasonable layered structure by combining MXene and graphene can effectively inhibit the restacking and overlap of MXene and improve the performance of supercapacitors. In this work, we studied the energy storage performance of a conventional MXene electrode and MXene/graphene composite electrode in sulfuric acid aqueous electrolyte by molecular dynamics (MD) simulation and analyzed their energy storage mechanisms. The simulation results reveal that the MXene/graphene composite electrode showed faster charge-discharge speed and larger capacity and had more obvious advantages as a cathode. The charging process of the composite cathode can be divided into two stages. In the first stage, SO42- and H3O+ enter the electrode as a whole in a nearly 1:2 ratio, and a unique three-layer structure is formed in the graphene area, while a large number of HSO4- leaves the electrode. In the second stage, SO42- with a part of H3O+ (ratio of 2:2 to 2:3) leave the electrode, and the three-layer structure is gradually destroyed. The cooperation of these two stages leads to a particular "concave" in the total energy change of the composite cathode. The introduction of graphene has brought about changes in ion distribution, migration mechanism, and energy change, making the MXene/graphene cathode show significant advantages in energy storage. This work is of great significance for understanding the microscopic energy storage mechanism of MXene/graphene-based electrodes.

Research Progress on Ammonia Sensors Based on Ti3C2Tx MXene at Room Temperature: A Review

Ammonia (NH3) potentially harms human health, the ecosystem, industrial and agricultural production, and other fields. Therefore, the detection of NH3 has broad prospects and important significance. Ti3C2Tx is a common MXene material that is great for detecting NH3 at room temperature because it has a two-dimensional layered structure, a large specific surface area, is easy to functionalize on the surface, is sensitive to gases at room temperature, and is very selective for NH3. This review provides a detailed description of the preparation process as well as recent advances in the development of gas-sensing materials based on Ti3C2Tx MXene for room-temperature NH3 detection. It also analyzes the advantages and disadvantages of various preparation and synthesis methods for Ti3C2Tx MXene's performance. Since the gas-sensitive performance of pure Ti3C2Tx MXene regarding NH3 can be further improved, this review discusses additional composite materials, including metal oxides, conductive polymers, and two-dimensional materials that can be used to improve the sensitivity of pure Ti3C2Tx MXene to NH3. Furthermore, the present state of research on the NH3 sensitivity mechanism of Ti3C2Tx MXene-based sensors is summarized in this study. Finally, this paper analyzes the challenges and future prospects of Ti3C2Tx MXene-based gas-sensitive materials for room-temperature NH3 detection.

Reversible Constrained Dissociation and Reassembly of MXene Films

Enabling materials to undergo reversible dynamic transformations akin to the behaviors of living organisms represents a critical challenge in the field of material assembly. The pursuit of such capabilities using conventional materials has largely been met with limited success. Herein, the discovery of reversible constrained dissociation and reconfiguration in MXene films, offering an effective solution to overcome this obstacle is reported. Specifically, MXene films permit rapid intercalation of water molecules between their distinctive layers, resulting in a significant expansion and exhibiting confined dissociation within constrained spaces. Meanwhile, the process of capillary compression driven by water evaporation reinstates the dissociated MXene film to its original compact state. Further, the adhesive properties emerging from the confined disassociation of MXene films can spontaneously induce fusion between separate films. Utilizing this attribute, complex structures of MXene films can be effortlessly foamed and interlayer porosity precisely controlled, using only water as the inducer. Additionally, a parallel phenomenon has been identified in graphene oxide films. This work not only provides fresh insights into the microscopic mechanisms of 2D materials such as MXene but also paves a transformative path for their macroscopic assembly applications in the future.

"Sweat-Driven" MXene Composites with Energy-Storage and Thermal-Management Multifunctions: A Platform for Versatile Electronic Skins

Most exogenous electronic skins (e-skins) currently face challenges of complex structure and poor compatibility with the human body. Utilizing human secretions (e.g., sweat) to develop e-skins is an effective solution strategy. Here, a new kind of "sweat-driven" e-skin is proposed, which realizes energy-storage and thermal-management multifunctions. Through the layer-by-layer assembly of MXene-carbon nanotube (CNT) composite with paper, lightweight and versatile e-skins based on supercapacitors and actuators are fabricated. Long CNTs wrap and entangle MXene nanosheets, enhancing their long-distance conductivity. Furthermore, the CNT network overcomes the structural collapse of MXene in sweat, improving the energy-storage performance of e-skin. The "sweat-driven" all-in-one supercapacitor with a trilayer structure is patternable, which absorbs sweat as electrolyte and harnesses the ions therein to store energy, exhibiting an areal capacitance of 282.3 mF cm-2 and a high power density (2117.8 µW cm-2). The "sweat-driven" actuator with a bilayer structure can be driven by moisture (bending curvature of 0.9 cm-1) and sweat for personal thermal management. Therefore, the paper serves as a separator, actuating layer, patternable layer, sweat extractor, and reservoir. The "sweat-driven" MXene-CNT composite provides a platform for versatile e-skins, which achieve the interaction with humans and offer insights into the development of multifunctional wearable electronics.

Preparation of cyclodextrin polymer-functionalized polyaniline/MXene composites for high-performance supercapacitor

Controlled aggregation is of great significance in designing nanodevices with high electrochemical performance. In this study, an in situ aggregation strategy with cyclodextrin polymer (CDP) was employed to prepare polyaniline (PANI)/MXene (MX) composites. MXene served as a two-dimensional structure template. Due to supramolecular interactions, CDP could be controllably modified with PANI layers, effectively preventing the self-polymerization of PANI. As a result, this integration facilitated a more uniform growth of PANI on MXene and further improved the capacitance performance of CDP-MX/PA. In a three-electrode system, the specific capacitance of MX/PA at 1 A g-1 was 460.8 F g-1, which increased to 523.8 F g-1 after CDP-induced growth. CDP-MX/PA exhibited a high energy density of 27.7 W h kg-1 at a power density of 700 W kg-1. This suggests that the synthetic strategy employed in this study holds promise in providing robust support for the preparation of high-performance energy-storage device.

An underwater vest containing an antioxidant MXene hydrogel for sensitive recognition of fish locomotion

The perception of fish locomotion is important for understanding their adaptive behaviors and ethological characteristics. However, the main strategy used for extracting fish attitudes involves the use of a vision-based monitoring system, which is limited in its range of observation and cannot perform tracking for long times. Here, we report the use of a wearable tagging electronic device, referred to as an underwater vest, to capture the surrounding flow field disturbances triggered by swimming or momentary postural changes. All of these goals were achieved by integrating a pair of pseudocapacitive pressure-sensing units and a flexible circuit board. Notably, additional conditions, such as variable hydraulic pressures and minimal changes in fish posture, require high stability and sensitivity of the sensing units. Thus, hybrid hydrogel electrodes were developed through cross-linking MXene with holey-reduced graphene oxide nanosheets and further modification with 1-ethyl-3-methylimidazolium dicyanamide ionic liquids, which increased the interfacial capacitance and long-term interfacial activity of the MXene. Consequently, the sensing unit exhibited ultrahigh sensitivity (Smax~136,207 kPa-1) in an aquatic environment for 60 days and superior high-pressure resolution (10 Pa) within a wide working range of 1 MPa. Ultimately, an underwater vest integrated with such sensing units clearly distinguished and recorded fish locomotion. We believe that the designed device may open avenues in flow field monitoring and ocean current detection and provide new insights into the development of sensitive underwater tagging.

3D grape string-like heterostructures enable high-efficiency sodium ion capture in Ti3C2Tx MXene/fungi-derived carbon nanoribbon hybrids

2D transition metal carbides and carbonitrides (MXenes) have emerged as promising electrode materials for electrochemistry ion capture but always suffer from severe layer-restacking and irreversible oxidation that restrains their electrochemical performance. Here we design a dual strategy of microstructure tailoring and heterostructure construction to synthesize a unique 3D grape string-like heterostructure consisting of Ti3C2Tx MXene hollow microspheres wrapped by fungi-derived N-doping carbon nanoribbons (denoted as GMNC). The 3D grape string-like heterostructure effectively avoids the aggregation of Ti3C2Tx MXene sheets and enhances the stability of MXenes, providing abundant active sites for ion capture, and an interconnected conductive bionic nanofiber network for high-rate electron transport. In consequence, GMNC achieves a superior adsorption capacity for sodium ions (Na+) in capacitive deionization (CDI) (162.37 mg gNaCl-1) with an ultra-high instantaneous adsorption rate (30.52 mg g-1 min-1) at an applied voltage of 1.6 V and satisfactory cycle stability over 100 cycles, which is a strong performer among the state-of-the-art values for MXene-based CDI electrodes. In addition, in situ electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) measurement combined with density functional theory (DFT) reveals the mechanisms of the Na+ capture process in the GMNC heterostructure. This work opens a new avenue for designing high-performance MXenes with a 3D hierarchical heterostructure for advanced electrochemical applications.

Enhanced Electrochemical Performance of MWCNT-Assisted Molybdenum-Titanium Carbide MXene as a Potential Electrode Material for Energy Storage Application

Two-dimensional (2D) materials such as MXenes have attracted considerable attention owing to their enormous potential for structural flexibility. Here, we prepared a Mo2TiC2Tx-layered structure from parent Mo2TiAlC2Tx MAX by chemically selective etching of the aluminum layer. The prepared MXene was employed in composite formation with CTAB-grafted multiwalled carbon nanotubes (MWCNTs) to have a structure with improved electrochemical performance. The samples were characterized to analyze the structure, morphology, elemental detection, vibrational modes, and surface chemistry, followed by an electrochemical performance of the Mo2TiC2Tx MXene and MWCNTs@Mo2TiC2Tx composite using the GAMRAY Potentiostat under a 1 M KOH electrolyte. The specific capacitance of pristine Mo2TiC2Tx was 425 F g-1, which was enhanced to 1740 F g-1 (almost 4 times) at 5 mV s-1 due to the increase in active surface area and conductive paths between the MXene sheets. The charge storage mechanism was studied by further resolving the cyclic voltammograms. MWCNTs@Mo2TiC2Tx showed much improved electrochemical performance and reaction kinetics, making it an ideal material candidate for supercapacitor applications.

Recent strategies, progress, and prospects of two-dimensional metal carbides (MXenes) materials in wastewater purification: A review

With the rapid development of industrialization, water pollution directly leads to the serious shortage of fresh water. As reported by the World Water Council, nearly 3.8 billion people will face water scarcity by 2030. Therefore, developing advanced nanomaterials to realize wastewater purification is a major challenge. Two-dimensional (2D) transition metal carbides (MXenes), as the emerging 2D layered nanomaterials, have been investigated for the applications of water purification treatment since first reported in 2011. Over 40 different MXenes have been developed for environmental remediation, and dozens more structures and properties are theoretically predicted. Here, we review the advances from the aspects of synthesis strategies for MXenes, purification mechanism, and their applications in wastewater treatment processes. The major points are 1) the synthesis and modification approaches for MXenes such as multi-layered stacked MXenes and delaminated MXenes 2) a discussion of current water remediation over MXene-based materials, 3) a brief introduction for removal behaviors and deep interaction mechanisms, 4) optimization strategies and key points for boosting the remediation performance of MXenes.

Hierarchically Porous 3D Freestanding Holey-MXene Framework via Mild Oxidation of Self-Assembled MXene Hydrogel for Ultrafast Pseudocapacitive Energy Storage

The true promise of MXene as a practical supercapacitor electrode hinges on the simultaneous advancement of its three-dimensional (3D) assembly and the engineering of its nanoscopic architecture, two critical factors for facilitating mass transport and enhancing an electrode's charge-storage performance. Herein, we present a straightforward strategy to engineer robust 3D freestanding MXene (Ti3C2Tx) hydrogels with hierarchically porous structures. The tetraamminezinc(II) complex cation ([Zn(NH3)4]2+) is selected to electrostatically assemble colloidal MXene nanosheets into a 3D interconnected hydrogel framework, followed by a mild oxidative acid-etching process to create nanoholes on the MXene surface. These hierarchically porous, conductive holey-MXene frameworks facilitate 3D transport of both electrons and electrolyte ions to deliver an excellent specific capacitance of 359.2 F g-1 at 10 mV s-1 and superb capacitance retention of 79% at 5000 mV s-1, representing a 42.2% and 15.3% improvement over pristine MXene hydrogel, respectively. Even at a commercial-standard mass loading of 10.1 mg cm-2, it maintains an impressive capacitance retention of 52% at 1000 mV s-1. This rational design of an electrode by engineering nanoholes on MXene nanosheets within a 3D porous framework dictates a significant step forward toward the practical use of MXene and other 2D materials in electrochemical energy storage systems.

Recent Advances and Strategies in MXene-Based Electrodes for Supercapacitors: Applications, Challenges and Future Prospects

With the growing demand for technologies to sustain high energy consumption, supercapacitors are gaining prominence as efficient energy storage solutions beyond conventional batteries. MXene-based electrodes have gained recognition as a promising material for supercapacitor applications because of their superior electrical conductivity, extensive surface area, and chemical stability. This review provides a comprehensive analysis of the recent progress and strategies in the development of MXene-based electrodes for supercapacitors. It covers various synthesis methods, characterization techniques, and performance parameters of these electrodes. The review also highlights the current challenges and limitations, including scalability and stability issues, and suggests potential solutions. The future outlooks and directions for further research in this field are also discussed, including the creation of new synthesis methods and the exploration of novel applications. The aim of the review is to offer a current and up-to-date understanding of the state-of-the-art in MXene-based electrodes for supercapacitors and to stimulate further research in the field.

Facile and Affordable Design of MXene-Co3 O4 -Based Nanocomposites for Detection of Hydrogen Peroxide in Cancer Cells: Toward Portable Tool for Cancer Management

Hydrogen peroxide (H2 O2 ) is a primary reactive oxygen species (ROS) that can act as a chemical signal in developing and progressing serious and life-threatening diseases like cancer. Due to the stressful nature of H2 O2 , there is an urgent need to develop sensitive analytical approaches to be applied to various biological matrices. Herein, a portable point-of-care electrochemical system based on MXene-Co3 O4 nanocomposites to detect H2 O2 in different cancer cell-lines is presented. The developed sensor is affordable, disposable, and highly selective for H2 O2 detection. This approach achieves a dynamic linear range of 75 µm with a LOD of 0.5 µm and a LOQ of 1.6 µm. To improve the practical application, the level of ROS is evaluated both in cancer cell lines MDA-MB-231 and DU145, respectively, to breast and prostate cancers, and in healthy HaCat cells. Moreover, the same cancer cells are treated with transforming growth factor-β1, and MXene-Co3 O4 modified strip is capable to monitorROS variation. The results are satisfactory compared with the cellular ROS fluorescent assay based on DCFH/DCFH-DA. These results open new perspectives for real-time monitoring of cancer progression and the efficacy of the therapy.

High-Temperature Oxidized Mo2CTx MXene for a High-Performance Supercapacitor

Molybdenum carbide (Mo2CTx MXene) did not possess suitable properties for supercapacitors. Herein, a short oxidation method of Mo2CTx in air at moderately high temperatures is proposed for fabricating a Mo2C/MoO3 heterostructure. The stability of Mo2CTx in air up to 700 °C and the phase transition at higher temperatures are confirmed. Such a heterostructure is beneficial in reducing the diffusion energy barrier of H+. In the aqueous system, the Mo2C/MoO3 electrode delivers a capacitance of up to 811 F g-1. A fully assembled symmetric solid-state supercapacitor delivers 224 F g-1 with an excellent retention rate of 91.05% after 7500 cycles. Besides, the supercapacitor can work at the low temperature of -60°, showing good low-temperature properties. The approach presented in this work opens a promising way to turn a neglected MXene, assumed to be unsuitable for supercapacitors, into one of the top-performing supercapacitor electrodes.

Metal-Organic Frameworks and Their Derivatives-Based Nanostructure with Different Dimensionalities for Supercapacitors

With the urgent demand for the achievement of carbon neutrality, novel nanomaterials, and environmentally friendly nanotechnologies are constantly being explored and continue to drive the sustainable development of energy storage and conversion installations. Among various candidate materials, metal-organic frameworks (MOFs) and their derivatives with unique nanostructures have attracted increasing attention and intensive investigation for the construction of next generation electrode materials, benefitting from their unique intrinsic characteristics such as large specific surface area, high porosity, and chemical tunability as well as the interconnected channels. Nevertheless, the poor electrochemical conductivity severely limits their application prospects, hence a variety of nanocomposites with multifarious structures have been designed and proposed from different dimensionalities. In this review, recent advances based on MOFs and their derivatives in different dimensionalities ranging from 1D nanopowders to 2D nanofilms and 3D aerogels, as well as 4D self-supporting electrodes for supercapacitors are summarized and highlighted. Furthermore, the key challenges and perspectives of MOFs and their derivatives-based materials for the practical and sustainable electrochemical energy conversion and storage applications are also briefly discussed, which may be served as a guideline for the design of next-generation electrode materials from different dimensionalities.

A novel electrochemical aptasensor based on eco-friendly synthesized titanium dioxide nanosheets and polyethyleneimine grafted reduced graphene oxide for ultrasensitive and selective detection of ciprofloxacin

Developing a rapid, sensitive, and efficient analytical method for the trace-level determination of highly concerning antibiotic ciprofloxacin (CIP) is desirable to guarantee the safety of human health and ecosystems. In this work, a novel electrochemical aptasensor based on polyethyleneimine grafted reduced graphene oxide and titanium dioxide (rGO/PEI/TiO2) nanocomposite was constructed for ultrasensitive and selective detection of CIP. Through the in-situ electrochemical oxidation of Ti3C2Tx nanosheets, TiO2 nanosheets with good electrochemical response were prepared in a more convenient and eco-friendly method. The prepared TiO2 nanosheets promote charge transferring on electrode interface, and [Fe(CN)6]3-/4- as electrochemical active substance can be electrostatically attracted by rGO/PEI. Thus, electrochemical detection signal of the aptasensor variates a lot after specific binding with CIP, achieving working dynamic range of 0.003-10.0 μmol L-1, low detection limit down to 0.7 nmol L-1 (S/N = 3) and selectivity towards other antibiotics. Additionally, the aptasensor exhibited good agreement with HPLC method at 95% confidence level, and achieved good recoveries (96.8-106.3%) in real water samples, demonstrating its suitable applicability of trace detection of CIP in aquatic environment.

Electrochemistry of Titanium Carbide MXenes in Supercapacitor

Novel electrode materials are always explored to achieve better performance of supercapacitors. Titanium carbide MXenes, Ti3 C2 Tx , are one of the very promising candidates for electrode materials in supercapacitors due to their unique structural and ion storage properties as 2D materials. Their large specific surface area, adjustable functionalized surface terminals, high electrical conductivities, hydrophilicity, and high Faradaic capacitance, also known widely but confusingly as pseudocapacitance, are highly desirable for making high-performance electrodes with increased dis-/charging rates and capacities. Herein, some selective electrochemical considerations of Ti3 C2 Tx MXenes for uses in supercapacitors are critically reviewed and assessed, aiming at a better fundamental understanding of the electrochemical basics and processes in Ti3 C2 Tx MXene-based electrode materials for supercapacitor applications.

High-Voltage MXene-Based Supercapacitors: Present Status and Future Perspectives

As an emerging class of 2D materials, MXene exhibits broad prospects in the field of supercapacitors (SCs). However, the working voltage of MXene-based SCs is relatively limited (typically ≤ 0.6 V) due to the oxidation of MXene electrode and the decomposition of electrolyte, ultimately leading to low energy density of the device. To solve this issue, high-voltage MXene-based electrodes and corresponding matchable electrolytes are developed urgently to extend the voltage window of MXene-based SCs. Herein, a comprehensive overview and systematic discussion regarding the effects of electrolytes (aqueous, organic, and ionic liquid electrolytes), asymmetric device configuration, and material modification on the operating voltage of MXene-based SCs, is presented. A deep dive is taken into the latest advances in electrolyte design, structure regulation, and high-voltage mechanism of MXene-based SCs. Last, the future perspectives on high-voltage MXene-based SCs and their possible development directions are outlined and discussed in depth, providing new insights for the rational design and realization of advanced next-generation MXene-based electrodes and high-voltage electrolytes.

Composite nanoarchitectonics with TiO2 nanocrystals and superior thin Ti3C2Tx nanosheets towards efficient NO removal

Accordion-like Ti₃C₂T_x MXene supplied a possibility to construct two-dimensional composites with novel performance. In this paper, few-layered Ti₃C₂T_x MXene was created via a chemical etching strategy. The oxidation in-situ using a powerful alkaline solution resulted successfully in TiO₂ nanocrystals grown on Ti₃C₂T_x nanosheets. The alkaline treatment adjusted terminations of the Ti₃C₂T_x MXene and controlled the oxidation degree by changing temperature. The ratio of Ti₃C₂T_x and TiO₂ was finally optimized. Because of Ti₃C₂T_x nanosheets with well conductivity and excellent light absorption as well as TiO₂ nanocrystal arrays on Ti₃C₂T_x nanosheets with a high specific surface area and more active sites, TiO₂/Ti₃C₂T_x composites revealed excellent photocatalystic activity, especially for NO removal. The improvement of separation and transfer efficiency of phootogenerated carriers is ascribed to the microstructure of TiO₂/Ti₃C₂T_x composites. The composite sample synthesized at 75 °C revealed the best NO removal efficiency, in which 70% of NO was removed at a concentration of 600 ppb. This study offers a new thought for preparing high performance MXene-based photocatalysts.

Recent advancements in zero- to three-dimensional carbon networks with a two-dimensional electrode material for high-performance supercapacitors

Supercapacitors have gained significant attention owing to their exceptional performance in terms of energy density and power density, making them suitable for various applications, such as mobile devices, electric vehicles, and renewable energy storage systems. This review focuses on recent advancements in the utilization of 0-dimensional to 3-dimensional carbon network materials as electrode materials for high-performance supercapacitor devices. This study aims to provide a comprehensive evaluation of the potential of carbon-based materials in enhancing the electrochemical performance of supercapacitors. The combination of these materials with other cutting-edge materials, such as Transition Metal Dichalcogenides (TMDs), MXenes, Layered Double Hydroxides (LDHs), graphitic carbon nitride (g-C₃N₄), Metal-Organic Frameworks (MOFs), Black Phosphorus (BP), and perovskite nanoarchitectures, has been extensively studied to achieve a wide operating potential window. The combination of these materials synchronizes their different charge-storage mechanisms to attain practical and realistic applications. The findings of this review indicate that hybrid composite electrodes with 3D structures exhibit the best potential in terms of overall electrochemical performance. However, this field faces several challenges and promising research directions. This study aimed to highlight these challenges and provide insights into the potential of carbon-based materials in supercapacitor applications.

An Ultrahighly Pressure Sensitive Electronic Fish Skin for Underwater Wave Sensing

Underwater flexible sensors have a future for wide application, which is promising for attaching them to underwater creatures to monitor vital signals and biomechanical analysis of their motion and perceive tiny environmental disturbances. However, the pressure waves induced by biological swimming are extremely weak and susceptible to undercurrents, making them difficult to sense. Here, we report an ultrahighly sensitive biomimetic electronic fish skin designed by embedding an artificial pseudocapacitive-based hair cell into a simulated canal neuromast encapsulation structure, in which the artificial hair cell, as the key sensitive unit, is assembled from hybrid film electrodes and polyurethane-acidic electrolyte foam. Such a film is prepared by inter-cross-linking MXene and holey reduced graphene oxide with the assistance of l-cysteine, effectively increasing the interfacial capacitance and alleviating the oxidation issues of MXene. Meanwhile, the acidic foam with high porosity shows great compressibility to adapt to a high-pressure underwater environment. Consequently, the device exhibits ultrahighly sensitivity (maximum sensitivity ∼173688 kPa^-1) over a wide range of depths (0-100 m) and remains stable after 10000 repeated tests. As an example case, the device is integrated as a motion monitoring system to identify the minor disturbances triggered by instantaneous postural changes of fish. The electronic fish skin is expected to demonstrate enormous potentials in flow field monitoring, ocean current detecting, and even seismic waves warning.

Rational design of flower-like MnO2/Ti3C2Txcomposite electrode for high performance supercapacitors

Combining the new two-dimensional conductive MXene with transition metal oxide to build composite structure is a promising path to improve the conductivity of metal oxide. However, a critical challenge still remains in how to achieve a good combination of MXene and metal oxide. Herein, we develop a facile hydrothermal route to synthesize the MnO₂/Ti₃C₂T_xcomposite electrode for supercapacitors by synergistically coupling MnO₂nanowires with Ti₃C₂T_xMXene nanoflakes. Compared with the pure MnO₂electrode, the morphology of the MnO₂/Ti₃C₂T_xcomposite electrode changes from nanowires to nanoflowers. Moreover, the overall conductivity and electrochemical performance of the composite electrode are greatly improved due to an addition of Ti₃C₂T_xMXene. The specific capacitance of the MnO₂/Ti₃C₂T_xcomposite electrode achieves 210.8 F·g^-1at a scan rate of 2 mV·s^-1, while that of the pure MnO₂electrode is only 55.2 F·g^-1. Furthermore, the specific capacitance of the MnO₂/Ti₃C₂T_xcomposite electrode still can remain at 97.2% even after 10 000 charge-discharge cycles, revealing an excellent cycle stability. The synthesis strategy of this work can pave the way for the research and practical application of the electrode materials for supercapacitors.

One-Dimensional π-d Conjugated Coordination Polymer Intercalated MXene Compound for High-Performance Supercapacitor Electrode

MXenes possess the characteristics required for high-performance supercapacitors, such as high metallic conductivity and electrochemical activity, but their full potential remains unrealized owing to their tendency to self-restack when fabricated into an electrode. Designing an MXene interlayer with an effective intercalant has, therefore, become an important criterion to alleviate the restacking issue while also synergistically interact with MXene to further improve its electrochemical activity. This study reports the intercalation of 1D π-d conjugated coordination polymer (Ni-BTA) within the Ti₃ C₂ T_x nanosheet for the fabrication of a highly efficient supercapacitor electrode. Ni-BTA, which consists of a nickel center and 1,2,4,5-benzenetetramine (BTA) organic chain, is uniformly intercalated by direct synthesis on the abundant oxygen terminals on the Ti₃ C₂ T_x nanosheet surface. The intercalated Ni-BTA acts as an effective charge carrier transportation pathway through its 1D stretched delocalized π-d electrons while participating in pseudocapacitive activity with the Ni centers. As a result, the Ni-BTA/MXene film exhibits excellent rate performance and a gravimetric specific capacitance of 264.4 F g^-1 at 5 mV s^-1 . This magnitude is retained up to 94.6% after 10 000 cycles. The present study provides insights into the design of MXene interlayers for the fabrication of highly robust and stable supercapacitors.

Architecting the High-Entropy Oxides on 2D MXene Nanosheets by Rapid Microwave-Heating Strategy with Robust Photoelectrochemical Oxygen Evolution Performance

High-entropy oxides (HEO) have recently concerned interest as the most promising electrocatalytic materials for oxygen evolution reactions (OER). In this work, a new strategy to the synthesis of HEO nanostructures on Ti₃ C₂ T_x MXene via rapid microwave heating and subsequent calcination at a low temperature is reported. Furthermore, the influence of HEO loading on Ti₃ C₂ T_x MXene is investigated toward OER performance with and without visible-light illumination in an alkaline medium. The obtained HEO/Ti₃ C₂ T_x -0.5 hybrid exhibited an outstanding photoelectrochemical OER ability with a low overpotential of 331 mV at 10 mA cm^-2 and a small Tafel slope of 71 mV dec^-1 , which exceeded that of a commercial IrO₂ catalyst (340 mV at 10 mA cm^-2 ). In particular, the fabricated water electrolyzer with the HEO/Ti₃ C₂ T_x -0.5 hybrid as anode required a less potential of 1.62 V at 10 mA cm^-2 under visible-light illumination. Owing to the strong synergistic interaction between the HEO and Ti₃ C₂ T_x MXene, the HEO/Ti₃ C₂ T_x hybrid has a great electrochemical surface area, many metal active sites, high conductivity, and fast reaction kinetics, resulting in an excellent OER performance. This study offers an efficient strategy for synthesizing HEO-based materials with high OER performance to produce high-value hydrogen fuel.

One-step construction of Ti3C2Tx/MoS2 hierarchical 3D porous heterostructure for ultrahigh-rate supercapacitor

Heterostructures based on different materials can not only take full advantage of each material and overcome their limitations but also produce special effects for different applications. Here, a facile co-thermal decomposition strategy to engineer hierarchical 3D porous Ti₃C₂T_x/MoS₂ heterostructure is presented for improved energy storage performance. The specific Ti₃C₂T_x/MoS₂ heterostructure promotes the fast transportation of electrons and ions and fast redox reaction kinetics due to the 3D interconnected porous channels and thin exposed electroactive S-Mo-S edges. As a result, the 3D porous Ti₃C₂T_x/MoS₂ heterostructure exhibits a specific capacitance of 439 F g^-1 at a scan rate of 5 mV s^-1, a satisfactory capacitance of 169 F g^-1 (about 30 % of initial capacitance) under an ultra-high scan rate of 10,000 mV s^-1 and long cycle stability. Moreover, ultrahigh power energy of 30,000 W kg^-1 with a high energy density of 6.3 Wh kg^-1 with superior cyclic stability (91 % of initial capacitance after 10,000 cycles) has been achieved from the Ti₃C₂T_x/MoS₂-based symmetric supercapacitor. This work provides an archetype for designing and preparing hierarchical 3D porous heterostructure electrodes for the next-generation supercapacitor with the high power density and rate performances.

Recent advances in the synthesis and electrocatalytic application of MXene materials

MXenes are a class of two-dimensional materials with a graphene-like structure, which have excellent optical, biological, thermodynamic, electrical and magnetic properties. Due to the diversity resulting from the combination of transition metals and C/N, the MXene family has expanded to more than 30 members and been applied in many fields with broad application prospects. Among their applications, electrocatalytic applications have achieved many breakthroughs. Therefore, in this review, we summarize the reports on the preparation of MXenes and their application in electrocatalysis published in the last five years and describe the two main methods for the preparation of MXenes, i.e., bottom-up and top to bottom synthesis. Different methods may change the structure or surface termination of MXenes, and accordingly affect their electrocatalytic performance. Furthermore, we highlight the application of MXenes in the electrocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂RR), nitrogen reduction reaction (NRR), and multi-functionalization. It can be concluded that the electrocatalytic properties of MXenes can be modified by changing the type of functional groups or doping. Also, MXenes can be compounded with other materials to produce electronic coupling and improve the catalytic activity and stability of the resulting composites. In addition, Mo₂C and Ti₃C₂ are two types of MXene materials that have been widely studied in the field of electrocatalysis. At present, research on the synthesis of MXenes is focused on carbides, whereas research on nitrides is rare, and there are no synthesis methods meeting the requirements of green, safety, high efficiency and industrialization simultaneously. Therefore, it is very important to explore environmentally friendly industrial production routes and devote more research efforts to the synthesis of MXene nitrides.

Recent Advances in Two-Dimensional MXene for Supercapacitor Applications: Progress, Challenges, and Perspectives

MXene is a type of two-dimensional (2D) transition metal carbide and nitride, and its promising energy storage materials highlight its characteristics of high density, high metal-like conductivity, tunable terminals, and charge storage mechanisms known as pseudo-alternative capacitance. MXenes are a class of 2D materials synthesized by chemical etching of the A element in MAX phases. Since they were first discovered more than 10 years ago, the number of distinct MXenes has grown substantially to include numerous M_nX_n-1 (n = 1, 2, 3, 4, or 5), solid solutions (ordered and disordered), and vacancy solids. To date, MXenes used in energy storage system applications have been broadly synthesized, and this paper summarizes the current developments, successes, and challenges of using MXenes in supercapacitors. This paper also reports the synthesis approaches, various compositional issues, material and electrode topology, chemistry, and hybridization of MXene with other active materials. The present study also summarizes MXene's electrochemical properties, applicability in pliant-structured electrodes, and energy storage capabilities when using aqueous/non-aqueous electrolytes. Finally, we conclude by discussing how to reshape the face of the latest MXene and what to consider when designing the next generation of MXene-based capacitors and supercapacitors.

Thickness-Independent Capacitive Performance of Holey Ti3 C2 Tx Film Prepared through a Mild Oxidation Strategy

The Ti₃ C₂ T_x film with metallic conductivity and high pseudo-capacitance holds profound promise in flexible high-rate supercapacitors. However, the restacking of Ti₃ C₂ T_x sheets hinders ion access to thick film electrodes. Herein, a mild yet green route has been developed to partially oxidize Ti₃ C₂ T_x to TiO₂ /Ti₃ C₂ T_x by introducing O₂  molecules during refluxing the Ti₃ C₂ T_x suspension. The subsequent etching away of these TiO₂  nanoparticles by HF leaves behind numerous in-plane nanopores on the Ti₃ C₂ T_x sheets. Electrochemical impedance spectroscopy shows that longer oxidation time of 40 min yields holey Ti₃ C₂ T_x (H-Ti₃ C₂ T_x ) with a much shorter relax time constant of 0.85 s at electrode thickness of 25 µm, which is 89 times smaller than that of the pristineTi₃ C₂ T_x film (75.58 s). Meanwhile, H-Ti₃ C₂ T_x film with 25 min oxidation exhibits less-dependent capacitive performance in film thickness range of 10-84 µm (1.63-6.41 mg cm^-2 ) and maintains around 60% capacitance as the current density increases from 1 to 50 A g^-1 . The findings clearly demonstrate that in-plane nanopores not only provide more electrochemically active sites, but also offer numerous pathways for rapid ion impregnation across the thick Ti₃ C₂ T_x film. The method reported herein would pave way for fabricating porous MXene materials toward high-rate flexible supercapacitor applications.

MXene: fundamentals to applications in electrochemical energy storage

A new, sizable family of 2D transition metal carbonitrides, carbides, and nitrides known as MXenes has attracted a lot of attention in recent years. This is because MXenes exhibit a variety of intriguing physical, chemical, mechanical, and electrochemical characteristics that are closely linked to the wide variety of their surface terminations and elemental compositions. Particularly, MXenes are readily converted into composites with materials including oxides, polymers, and CNTs, which makes it possible to modify their characteristics for a variety of uses. MXenes and MXene-based composites have demonstrated tremendous promise in environmental applications due to their excellent reducibility, conductivity, and biocompatibility, in addition to their well-known rise to prominence as electrode materials in the energy storage sector. The remarkable characteristics of 2D MXene, including high conductivity, high specific surface area, and enhanced hydrophilicity, account for the increasing prominence of its use in storage devices. In this review, we highlight the most recent developments in the use of MXenes and MXene-based composites for electrochemical energy storage while summarizing their synthesis and characteristics. Key attention is paid to applications in supercapacitors, batteries, and their flexible components. Future research challenges and perspectives are also described.

MXene-Based Nanomaterials for Multifunctional Applications

MXene is becoming a "rising star" material due to its versatility for a wide portfolio of applications, including electrochemical energy storage devices, electrocatalysis, sensors, biomedical applications, membranes, flexible and wearable devices, etc. As these applications promote increased interest in MXene research, summarizing the latest findings on this family of materials will help inform the scientific community. In this review, we first discuss the rapid evolutionary change in MXenes from the first reported M₂XT_x structure to the last reported M₅X₄T_x structure. The use of systematically modified synthesis routes, such as foreign atom intercalation, tuning precursor chemistry, etc., will be further discussed in the next section. Then, we review the applications of MXenes and their composites/hybrids for rapidly growing applications such as batteries, supercapacitors, electrocatalysts, sensors, biomedical, electromagnetic interference shielding, membranes, and flexible and wearable devices. More importantly, we notice that its excellent metallic conductivity with its hydrophilic nature distinguishes MXene from other materials, and its properties and applications can be further modified by surface functionalization. MXene composites/hybrids outperform pristine MXenes in many applications. In addition, a summary of the latest findings using MXene-based materials to overcome application-specific drawbacks is provided in the last few sections. We hope that the information provided in this review will help integrate lab-scale findings into commercially viable products.

Tightly intercalated Ti3C2Tx/MoO3-x/PEDOT:PSS free-standing films with high volumetric/gravimetric performance for flexible solid-state supercapacitors

Ti₃C₂T_x-MXenes have extremely promising applications in electrochemistry, but the development of Ti₃C₂T_x is limited due to severe self-stacking problem. Here, we introduced oxygen vacancy-enriched molybdenum trioxide (MoO_3-x) with pseudocapacitive properties as the intercalator of Ti₃C₂T_x and PEDOT with high electronic conductivity as the co-intercalator and conductive binder of Ti₃C₂T_x to synthesize Ti₃C₂T_x/MoO_3-x/PEDOT:PSS (TMP) free-standing films by vacuum-assisted filtration and H₂SO₄ soaking. The tightly intercalated free-standing film structure can effectively improve the self-stacking phenomenon of Ti₃C₂T_x, expose more active sites and facilitate electron/ion transport, thus making TMP show excellent electrochemical performance. The volumetric and gravimetric capacitance of optimized TMP-2 can reach 1898.5 F cm^-3 and 523.0 F g^-1 at 1 A g^-1 with a rate performance of 90.5% at the current density from 1 A g^-1 to 20 A g^-1, which is significantly better than those of MXene-based composites reported in the literature. The directly-assembled TMP-2//TMP-2 flexible solid-state supercapacitor displays high energy/power output performances (25.1 W h L^-1 at 6383.1 W L^-1, 6.9 W h kg^-1 at 1758.4 W kg^-1) and there is no obvious change after 100 cycles at a bending angle of 180°. As a result, the tightly intercalated TMP-2 free-standing film with high volumetric/gravimetric capacitances is a promising material for flexible energy storage devices.

Three-dimensional N-doped mesoporous carbon–MXene hybrid architecture for supercapacitor applications

NMC@MXene exhibits excellent rate capability as electrode material for supercapacitors.

Fabrication and Functionalisation of Nanocarbon-Based Field-Effect Transistor Biosensors

Nanocarbon-based field-effect transistor (NC-FET) biosensors are at the forefront of future diagnostic technology. By integrating biological molecules with electrically conducting carbon-based platforms, high sensitivity real-time multiplexed sensing is possible. Combined with their small footprint, portability, ease of use, and label-free sensing mechanisms, NC-FETs are prime candidates for the rapidly expanding areas of point-of-care testing, environmental monitoring and biosensing as a whole. In this review we provide an overview of the basic operational mechanisms behind NC-FETs, synthesis and fabrication of FET devices, and developments in functionalisation strategies for biosensing applications.

3D Porous Compact 1D/2D Fe2 O3 /MXene Composite Aerogel Film Electrodes for All-Solid-State Supercapacitors

2D MXene nanoflakes usually undergo serious restacking, that easily aggravates during the traditional vacuum-assisted filtration process; and thus, hinders the electrochemical performance of the corresponding film electrodes. Herein, 3D porous compact 1D/2D Fe₂ O₃ /MXene aerogel film electrode with an enhanced electrochemical performance is fabricated by freeze-drying assisted mechanical pressing. An introduction of 1D α-Fe₂ O₃ nanorods can not only alleviate the restacking of 2D MXene but also provide additional pseudocapacitance for the composite film system. Thus, the resulting Fe₂ O₃ /MXene aerogel film electrode shows an enhanced specific capacitance of 182 F g^-1 (691 mF cm^-2 ) at a current density of 1 A g^-1 in 3 m H₂ SO₄ electrolyte as well as with 81.74% capacitance retention after 10 000 charge-discharge cycles. Besides, the addition of 1D α-Fe₂ O₃ nanorods has a significant contribution in the volumetric capacitance of the composite aerogel film (150 F cm^-3 ), which is 2.68 times that of the pure MXene aerogel film (56 F cm^-3 ). Moreover, the fabricated all-solid-state symmetric supercapacitor (SSSC) delivers a superior areal energy density of 3.61 µWh cm^-2 at a power density of 119.04 µW cm^-2 . This rapid-forming 3D porous, binder-free, and freestanding aerogel film provides a progressive strategy for the fabrication of MXene-based electrode for supercapacitors.

Coupling W18 O49 /Ti3 C2 Tx MXene Pseudocapacitive Electrodes with Redox Electrolytes to Construct High-Performance Asymmetric Supercapacitors

A pseudocapacitive electrode with a large surface area is critical for the construction of a high-performance supercapacitor. A 3D and interconnected network composed of W₁₈ O₄₉ nanoflowers and Ti₃ C₂ T_x MXene nanosheets is thus synthesized using an electrostatic attraction strategy. This composite effectively prevents the restacking of Ti₃ C₂ T_x MXene nanosheets and meanwhile sufficiently exposes electrochemically active sites of W₁₈ O₄₉ nanoflowers. Namely, this self-assembled composite owns abundant oxygen vacancies from W₁₈ O₄₉ nanoflowers and enough active sites from Ti₃ C₂ T_x MXene nanosheets. As a pseudocapacitive electrode, it shows a big specific capacitance, superior rate capability and good cycle stability. A quasi-solid-state asymmetric supercapacitor (ASC) is then fabricated using this pseudocapacitive anode and the cathode of activated carbon coupled with a redox electrolyte of FeBr₃ . This ASC displays a cell voltage of 1.8 V, a capacitance of 101 F g^-1 at a current density of 1 A g^-1 , a maximum energy density of 45.4 Wh kg^-1 at a power density of 900 W kg^-1 , and a maximum power density of 18 000 W kg^-1 at an energy density of 10.8 Wh kg^-1 . The proposed strategies are promising to synthesize different pseudocapacitive electrodes as well as to fabricate high-performance supercapacitor devices.

In Situ Nitrogen Functionalization of 2D-Ti3C2Tx-MXenes for High-Performance Zn-Ion Supercapacitor

Zinc (Zn) ion supercapacitors (ZISCs) have attracted considerable attention as a viable energy storage technology because they are cost-effective, safe, and environmentally friendly. However, cathode materials with suitable properties are rare and need to be explored. In this regard, metal carbides (MXenes) are a good choice for capacitive energy storage, but they exhibit low capacitance. The energy storage performance of MXenes can be bossed using functionalization with heteroatom doping, e.g., nitrogen (N), to simultaneously modify ZISCs' fundamental characteristics and electrochemical properties. Herein, we present an in-situ N-functionalization of Ti3C2Tx-MXene via a hydrothermal reaction with urea (denoted as N-Ti3C2Tx-MXene). N-functionalization into Ti3C2Tx-MXene raised Ti3C2Tx-MXene's interlayer spacing and boosted the Zn-ion storage in 1 M ZnSO4 electrolyte. The N-Ti3C2Tx-MXene electrode delivered an excellent specific capacitance of 582.96 F/g at 1 A/g and retained an outstanding cycle stability of 94.62% after 5000 cycles at 10 A/g, which is 1.8 times higher than pristine Ti3C2Tx-MXene at identical conditions. Moreover, the N-Ti3C2Tx-MXene//Zn device demonstrated a maximum capacitance of 153.55 F/g at 1 A/g, retained 92% of its initial value after 5000 cycles, and its Coulombic efficiency was ~100%. This strategy considerably reduced Ti3C2Tx-MXene nanosheet restacking and aggregation and enhanced electrochemical performance. Further, this research elucidated N-Ti3C2Tx-MXene's charge-storage process and offered a fresh approach to the rational design of novel electrode materials for ZISCs.

MXenes Thin Films: From Fabrication to Their Applications

Two-dimensional MXenes possessed exceptional physiochemical properties such as high electrical conductivity (20,000 Scm-1), flexibility, mechanical strength (570 MPa), and hydrophilic surface functionalities that have been widely explored for energy storage, sensing, and catalysis applications. Recently, the fabrication of MXenes thin films has attracted significant attention toward electronic devices and sensor applications. This review summarizes the exciting features of MXene thin film fabrication methods such as vacuum-assisted filtration (VAF), electrodeposition techniques, spin coating, spray coating, dip-coating methods, and other physical/chemical vapor deposition methods. Furthermore, a comparison between different methods available for synthesizing a variety of MXenes films was discussed in detail. This review further summarizes fundamental aspects and advances of MXenes thin films in solar cells, batteries, electromagnetic interference shielding, sensing, etc., to date. Finally, the challenges and opportunities in terms of future research, development, and applications of MXenes-based films are discussed. A comprehensive understanding of these competitive features and challenges shall provide guidelines and inspiration for further growth in MXenes-based functional thin films and contribute to the advances in MXenes technology.