Amorphous Ni-Fe-Mo Suboxides Coupled with Ni Network as Porous Nanoplate Array on Nickel Foam: A Highly Efficient and Durable Bifunctional Electrode for Overall Water Splitting

Ce-4f as an electron-modulation reservoir weakening Fe-O bond to induce iron vacancies in CeFevNi hydroxide for enhancing oxygen evolution reaction

Designing novel rare-earth-transition metal composites is at the forefront of electrocatalyst research. However, the modulation of transition metal electronic structures by rare earths to induce vacancy defects and enhance electrochemical performance has rarely been reported. In this study, we systematically investigate the mechanism by which Ce-4f electron modulation weakens the Fe-O bond, thereby altering the electronic structure in CeFevNi hydroxide to improve oxygen evolution reaction (OER) performance. Theoretical calculations and experimental characterizations reveal that Ce-4f orbitals function as electron-modulation reservoirs, capable not only of retaining or donating electrons but also of influencing the material's electronic structure. Moreover, Ce-4f bands optimize the Fe lower Hubbard bands (LHB) and O-2p bands, leading to weakened Fe-O bonds and the formation of cationic vacancies. This change results in the upshift of the d-band center at the active sites, favoring the reaction energy barrier for oxygen intermediates in the OER process. The synthesized catalyst demonstrated an overpotential of 201 mV at 10 mA cm-2 and a lifetime exceeding 200 h at 100 mA cm-2 under alkaline conditions. This work offers a proof-of-concept for the application of the mechanism of rare earth-induced transition metal vacancy defects, providing a general guideline for the design and development of novel highly efficient catalysts.

Coordination Engineering of Carbon Dots and Mn in Co-Based Phosphides for Highly Efficient Seawater Splitting at Ampere-Level Current Density

Direct electrolysis of seawater to generate hydrogen is an attractive approach for storing renewable energy. However, direct seawater splitting suffers from low current density and limited operating stability, which severely hinders its industrialization. Herein, a promising strategy is reported to obtain a nano needle-like array catalyst-CDs-Mn-CoxP on nickel foam, in which the Mn─O─C bond tightly binds Mn, Carbon dots (CDs), and CoxP together. The coordination engineering of CDs and Mn not only effectively regulates the electronic structure of CoxP, but also endows the as-prepared catalyst with selectivity and marked long-term stability at ampere-level current density. Low overpotentials of 208 and 447 mV are required to achieve 1000 mA cm-2 for hydrogen evolution reaction (HER) and Oxygen evolution reaction (OER) in simulated seawater, respectively. Cell potentials of 1.78 and 1.86 V are needed to reach 500 and 1000 mA cm-2 in alkaline seawater along with excellent durability for 350 h. DFT studies have verified that the introduction of Mn and CDs effectively shifts the d-band center of Co-3d toward higher energy, thereby strengthening the adsorption of intermediates and enhancing the catalytic activity. This study sheds light on the development of highly effective and stable catalysts for large-scale seawater electrolysis.

Integrated Catalyst-Substrate Electrodes for Electrochemical Water Splitting: A Review on Dimensional Engineering Strategy

Water splitting (or, water electrolysis) is considered as a promising approach to produce green hydrogen and relieve the ever-increasing energy consumption as well as the accompanied environmental impact. Development of high-efficiency, low-cost practical water-splitting systems demands elegant design and fabrication of catalyst-loaded electrodes with both high activity and long-life time. To this end, dimensional engineering strategies, which effectively tune the microstructure and activity of electrodes as well as the electrochemical kinetics, play an important role and have been extensively reported over the past years. Here, a type of most investigated electrode configurations is reviewed, combining particulate catalysts with 3D porous substrates (aerogels, metal foams, hydrogels, etc.), which offer special advantages in the field of water splitting. It is analyzed the design principles, structural and interfacial characteristics, and performance of particle-3D substrate electrode systems including overpotential, cycle life, and the underlying mechanism toward improved catalytic properties. In particular, it is also categorized the catalysts as different dimensional particles, and show the importance of building hybrid composite electrodes by dimensional control and engineering. Finally, present challenges and possible research directions toward low-cost high-efficiency water splitting and hydrogen production is discussed.

Fe-induced crystalline-amorphous interface engineering of a NiMo-based heterostructure for enhanced water oxidation

Engineering heterostructures with a unique surface/interface structure is one of the effective strategies to develop highly active noble-metal-free catalysts for the oxygen evolution reaction (OER), because the surface/interface of catalysts is the main site for the OER. Herein, we design a coralloid NiMo(Fe)-20 catalyst with a crystalline-amorphous interface through combining a hydrothermal method and an Fe-induced surface reconfiguration strategy. That is, after Fe3+ impregnation treatment, the Ni(OH)2-NiMoO4 pre-catalyst with a complete crystalline surface is restructured into a trimetallic heterostructure with a crystalline-amorphous interface, which facilitates mass diffusion and charge transfer during the OER. As expected, self-supported NiMo(Fe)-20 exhibits excellent electrocatalytic water oxidation performance (overpotential: η-10 = 220 mV, η-100 = 239 mV) in the alkaline electrolyte, and its electrocatalytic performance hardly changes after maintaining the current density of 50 mA cm-2 for 10 hours. Furthermore, nickel foam (NF) supported commercial Pt/C and self-supported NiMo(Fe)-20 served as the cathode and anode of the Pt/C‖NiMo(Fe)-20 electrolyzer, respectively, which exhibits a lower cell voltage (E-100 = 1.53 V) than that of the Pt/C‖RuO2 electrolyzer (E-100 = 1.58 V) assembled with noble metal-based catalysts. The enhanced electrocatalytic performance of the NiMo(Fe)-20 catalyst is mainly attributed to the synergistic effect between the crystalline-amorphous interface and the coralloid trimetallic heterostructure.

Multi-metal electrocatalyst with crystalline/amorphous structure for enhanced alkaline water/seawater hydrogen evolution

The development of well-defined nanomaterials as non-noble metal electrocatalysts has broad application prospect for hydrogen generation technology. Recently, multi-metal electrocatalysts for hydrogen evolution reaction (HER) have attracted extensive attention due to their high catalytic performance arising from the synergistic effect of multi-metal interaction. However, most multi-metal catalysts suffer from the limited synergistic effect because of poor interfacial compatibility between different components. Here, a novel multi-metal catalyst (Ni/MoO2@CoFeOx) nanosheet with a crystalline/amorphous structure is demonstrated, which shows high HER activity. Ni/MoO2@CoFeOx exhibits an ultra-low overpotential of 18, 39, and 93 mV at 10 mA cm-2 in alkaline water, alkaline seawater and natural seawater, respectively, which outperformances most of the state-of-the-art non-noble metal compounds. In addition, the catalyst shows exceptional stability under 500 mA cm-2 in alkaline solution. In-situ Raman and other advanced structural characterization confirms the excellent catalytic activity is mainly contributed by: (1) the strong synergistic effect of multi-metal components provides multiple active sites in the catalytic process; (2) the crystalline/amorphous interface in Ni/MoO2@CoFeOx boosts the catalytically active sites and structure stability; (3) the crystalline phase enhances the intrinsic conductivity greatly; and (4) the amorphous phase provides abundant unsaturated sites for improved intrinsic catalytic activity. This work provides a feasible way to design electrocatalyst with high activity and stability for practical applications.

Phosphorus-Modulated Generation of Defective Molybdenum Sites as Synergistic Active Centers for Durable Oxygen Evolution

It is well known that electrocatalytic oxygen evolution reaction (OER) activities primarily depend on the active centers of electrocatalysts. In some oxide electrocatalysts, high-valence metal sites (e.g., molybdenum oxide) are generally not the real active centers for electrocatalytic reactions, which is largely due to their undesired intermediate adsorption behaviors. As a proof-of-concept, molybdenum oxide catalysts are selected as a representative model, in which the intrinsic molybdenum sites are not the favorable active sites. Via phosphorus-modulated defective engineering, the inactive molybdenum sites can be regenerated as synergistic active centers for promoting OER. By virtue of comprehensive comparison , it is revealed that the OER performance of oxide catalysts is highly associated with the phosphorus sites and the molybdenum/oxygen defects. Specifically, the optimal catalyst delivers an overpotential of 287 mV to achieve the current density of 10 mA cm-2 , accompanied by only 2% performance decay for continuous operation up to 50 h. It is expected that this work sheds light on the enrichment of metal active sites via activating inert metal sites on oxide catalysts for boosting electrocatalytic properties.

Single-Atom Pt Embedded in Defective Layered Double Hydroxide for Efficient and Durable Hydrogen Evolution

Electrocatalysis in neutral conditions is appealing for hydrogen production by utilizing abundant wastewater or seawater resources. Single-atom catalysts (SACs) immobilized on supports are considered one of the most promising strategies for electrocatalysis research. While they have principally exhibited breakthrough activity and selectivity for the hydrogen evolution reaction (HER) electrocatalysis in alkaline or acidic conditions, few SACs were reported for HER in neutral media. Herein, we report a facile strategy to tailor the water dissociation active sites on the NiFe LDH by inducing Mo species and an ultralow single atomic Pt loading. The defected NiFeMo LDH (V-NiFeMo LDH) shows HER activity with an overpotential of 89 mV at 10 mA cm-2 in 1 M phosphate buffer solutions. The induced Mo species and the transformed NiO/Ni phases after etching significantly increase the electron conductivity and the catalytic active sites. A further enhancement can be achieved by modulating the ultralow single atom Pt anchored on the V-NiFeMo LDH by potentiostatic polarization. A potential as low as 37 mV is obtained at 10 mA cm-2 with a pronounced long-term durability over 110 h, surpassing its crystalline LDH materials and most of the HER catalysts in neutral medium. Experimental and density functional theory calculation results have demonstrated that the synergistic effects of Mo/SAs Pt and phase transformation into NiFe LDH reduce the kinetic energy barrier of the water dissociation process and promote the H* conversion for accelerating the neutral HER.

Interlayer-Confined NiFe Dual Atoms within MoS2 Electrocatalyst for Ultra-Efficient Acidic Overall Water Splitting

Confining dual atoms (DAs) within the van der Waals gap of 2D layered materials is expected to expedite the kinetic and energetic strength in catalytic process, yet is a huge challenge in atomic-scale precise assembling DAs within two adjacent layers in the 2D limit. Here, an ingenious approach is proposed to assemble DAs of Ni and Fe into the interlayer of MoS2 . While inheriting the exceptional merits of diatomic species, this interlayer-confined structure arms itself with confinement effect, displaying the more favorable adsorption strength on the confined metal active center and higher catalytic activity towards acidic water splitting, as verified by intensive research efforts of theoretical calculations and experimental measurements. Moreover, the interlayer-confined structure also renders metal DAs a protective shelter to survive in harsh acidic environment. The findings embodied the confinement effects at the atom level, and interlayer-confined assembling of multiple species highlights a general pathway to advance interlayer-confined DAs catalysts within various 2D materials.

Coupling acid catalysis and selective oxidation over MoO3-Fe2O3 for chemical looping oxidative dehydrogenation of propane

Redox catalysts play a vital role in chemical looping oxidative dehydrogenation processes, which have recently been considered to be a promising prospect for propylene production. This work describes the coupling of surface acid catalysis and selective oxidation from lattice oxygen over MoO₃-Fe₂O₃ redox catalysts for promoted propylene production. Atomically dispersed Mo species over γ-Fe₂O₃ introduce effective acid sites for the promotion of propane conversion. In addition, Mo could also regulate the lattice oxygen activity, which makes the oxygen species from the reduction of γ-Fe₂O₃ to Fe₃O₄ contribute to selectively oxidative dehydrogenation instead of over-oxidation in pristine γ-Fe₂O₃. The enhanced surface acidity, coupled with proper lattice oxygen activity, leads to a higher surface reaction rate and moderate oxygen diffusion rate. Consequently, this coupling strategy achieves a robust performance with 49% of propane conversion and 90% of propylene selectivity for at least 300 redox cycles and ultimately demonstrates a potential design strategy for more advanced redox catalysts.

Tunable d-band center of a NiFeMo alloy with enlarged lattice strain enhancing the intrinsic catalytic activity for overall water-splitting

Developing efficient bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) under alkaline conditions is prospective for reducing energy consumption during water electrolysis. In this work, we successfully synthesized nanocluster structure composites composed of NiFeMo alloys with controllable lattice strain by the electrodeposition method at room temperature. The unique structure of NiFeMo/SSM (stainless steel mesh) facilitates the exposure of abundant active sites and promotes mass transfer and gas exportation. The NiFeMo/SSM electrode exhibits a low overpotential of 86 mV at 10 mA cm^-2 for the HER and 318 mV at 50 mA cm^-2 for the OER, and the assembled device reveals a low voltage of 1.764 V at 50 mA cm^-2. Moreover, both the experimental results and theoretical calculations reveal that the dual doping of Mo and Fe can induce the tunable lattice strain of nickel, which in turn changes the d-band center and electronic interaction of the catalytically active site, and finally enhances the HER and OER catalytic activity. This work may provide more options for the design and preparation of bifunctional catalysts based on non-noble metals.

Regulating Complex Transition Metal Oxyhydroxides Using Ni3S2: 3D NiCoFe(oxy)hydroxide/Ni3S2/Ni Foam for an Efficient Alkaline Oxygen Evolution Reaction

In electrochemical decomposition of water, the slow kinetics of the anodic oxygen evolution reaction (OER) is a challenge for efficient hydrogen production. Heterointerface engineering is a desirable way to rationally design electrocatalysts for the OER. Herein, we designed and fabricated a nanoparticle flower-like NiCoFe(oxy)hydroxide catalyst in situ grown on the surface of Ni₃S₂/NF to construct a heterojunction via combining hydrothermal and electrodeposition methods. The heterostructure exhibits a smaller overpotential of 254 mV at a large current density of 100 mA cm^-2 in 1 M KOH than that of pristine NiCoFeO_xH_y/NF (356 mV) and Ni₃S₂/NF (471 mV). Tafel and electrochemical impedance spectroscopy further showed a favorable kinetics during electrolysis. The role of the substrate Ni₃S₂ was explored via density functional theory calculations. Our calculations found that SO_x on the Ni₃S₂ surface is a strong nucleophilic group and the synergy effect between Fe and SO_x could break *OOH to reduce the Gibbs energy. We also found that the contribution of SO_x in sulfates to the OER activity could be negligible. Furthermore, a series of comparative samples were prepared to test this synergy effect. Our experiments indicated that the introduction of Ni₃S₂ is beneficial. The present contribution provides an important helpful insight into the design and fabrication of novel and highly efficient heterostructure electrocatalysts by introducing nucleophilic groups at the interface.

Cathodic Protection System against a Reverse-Current after Shut-Down in Zero-Gap Alkaline Water Electrolysis

Growing the hydrogen economy requires improving the stability, efficiency, and economic value of water-splitting technology, which uses an intermittent power supply from renewable energy sources. Alkaline water electrolysis systems face a daunting challenge in terms of stabilizing hydrogen production under the condition of transient start-up/shut-down operation. Herein, we present a simple but effective solution for the electrode degradation problem induced by the reverse-current under transient power condition based on a fundamental understanding of the degradation mechanism of nickel (Ni). It was clearly demonstrated that the Ni cathode was irreversibly oxidized to either the β-Ni(OH)₂ or NiO phases by the reverse-current flow after shut-down, resulting in severe electrode degradation. It was also determined that the potential of the Ni electrode should be maintained below 0.6 V_RHE under the transient condition to keep a reversible nickel phase and an activity for the hydrogen evolution reaction. We suggest a cathodic protection approach in which the potential of the Ni electrode is maintained below 0.6 V_RHE by the dissolution of a sacrificial metal to satisfy the above requirement; irreversible oxidization of the cathode is prevented by connecting a sacrificial anode to the Ni cathode. In the accelerated durability test under a simulated reverse-current condition, lead was found to be the most promising candidate for the sacrificial metal, as it is cost effective and demonstrates chemical stability in the alkaline media. A newly defined metric, a reverse-current stability factor, highlights that our system for protecting the cathode against the reverse-current is an efficient strategy for stable and cost effective alkaline hydrogen production.

Doping Mo into NiFe LDH/NiSe Heterostructure to Enhance Oxygen Evolution Activity by Synergistically Facilitating Electronic Modulation and Surface Reconstruction

It is of great significance to design highly efficient electrocatalysts with abundant earth elements instead of precious metals for water splitting. Herein, Mo-doped NiFe-layered double hydroxides/NiSe heterostructure (Mo-NiFe LDH/NiSe) was fabricated by coupling Mo-doped NiFe LDH and NiSe on nickel foam (NF). The heterostructure electrocatalyst showed ultra-low overpotential (250 mV) and remarkable durability for oxygen evolution reaction (OER) at 150 mA cm^-2 . Both theoretical and experimental results confirmed that Mo doping and interfacial synergism induced the interfacial charge redistribution and the lifted d-band center to weaken the energy barrier (EB) of the formation of OOH^* . Mo doping also facilitated the surface reconstruction of NiFe LDH into Ni(Fe)OOH as the active sites under electro-oxidation process. This work provides a facile strategy for electronic modulation and surface reconstruction of OER electrocatalyst by transition metal doping and heterostructure generation.

Reprogramming thermodynamic-limiting oxidation cycle in NiFe-based oxygen evolution electrocatalyst through Mo doping induced surface reconstruction

Engineering of robust nonprecious electrocatalysts toward anodic oxygen evolution reaction (OER) is of great significance for lowering the cost and energy consumption for renewable fuel production. Herein, we report NiFeMoO_x nanosheets as high-performance OER electrocatalyst through promoting the thermodynamic-limiting oxidation cycle process in NiFe oxyhydroxide via high-valence Mo doping. The NiFeMoO_x nanosheets are prepared by an elaborate in-situ solvothermal etching-depositing process with NiFe alloy framework as substrate and metal precursors. The resultant nanosheets exhibit outstanding alkaline OER activity, requires only 235/282/327 mV overpotentials to achieve current density of 10/100/300 mA cm^-2, respectively, with a good long-term stability at 20 mA cm^-2 for 72 h. Besides, the Tafel slope low to 28.1 mV dec^-1 indicates a favorable OER kinetics. The superior catalytic activity of NiFeMoO_x nanosheets should be attributed to the lower oxidation states of Ni and Fe induced by high-valence dopant, leading to easier surface reconstruction at low charge oxidation cycling during OER, thereby effectively reducing the overpotential. The synergy between the electronic effect among multimetallic sites and the unique morphology is expected to inspire the development of robust OER electrocatalyst for industrial application.

Bimetal Modulation Stabilizing a Metallic Heterostructure for Efficient Overall Water Splitting at Large Current Density

Large current-driven alkaline water splitting for large-scale hydrogen production generally suffers from the sluggish charge transfer kinetics. Commercial noble-metal catalysts are unstable in large-current operation, while most non-noble metal catalysts can only achieve high activity at low current densities <200 mA cm^-2 , far lower than industrially-required current densities (>500 mA cm^-2 ). Herein, a sulfide-based metallic heterostructure is designed to meet the industrial demand by regulating the electronic structure of phase transition coupling with interfacial defects from Mo and Ni incorporation. The modulation of metallic Mo₂ S₃ and in situ epitaxial growth of bifunctional Ni-based catalyst to construct metallic heterostructure can facilitate the charge transfer for fast Volmer H and Heyrovsky H₂ generation. The Mo₂ S₃ @NiMo₃ S₄ electrolyzer requires an ultralow voltage of 1.672 V at a large current density of 1000 mA cm^-2 , with ≈100% retention over 100 h, outperforming the commercial RuO₂ ||Pt/C, owing to the synergistic effect of the phase and interface electronic modulation. This work sheds light on the design of metallic heterostructure with an optimized interfacial electronic structure and abundant active sites for industrial water splitting.

A Tandem Interfaced (Ni3 S2 -MoS2 )@TiO2 Composite Fabricated by Atomic Layer Deposition as Efficient HER Electrocatalyst

Reported herein is a highly active and durable hydrogen evolution reaction (HER) electrocatalyst, which is constructed following a tandem interface strategy and functional in alkaline and even neutral medium (pH ≈ 7). The ternary composite material, consisting of conductive nickel foam (NF) substrate, Ni₃ S₂ -MoS₂ heterostructure, and TiO₂ coating, is synthesized by the hydrothermal method and atomic layer deposition (ALD) technique. Representative results include: (1) versatile characterizations confirm the proposed composite structure and strong electronic interactions among comprised sulfide and oxide species; (2) the material outperforms commercial Pt/C by recording an overpotential of 115 mV and a Tafel slope of 67 mV dec^-1 under neutral conditions. A long-term stability in alkaline electrolytes up to 200 h and impressive overall water splitting behavior (1.56 V @ 10 mA cm^-2 ) are documented; (3) implementation of ALD oxide tandem layer is crucial to realize the design concept with superior HER performance by modulating a variety of heterointerface and intermediates electronic structure.

Construction of superhydrophilic metal-organic frameworks with hierarchical microstructure for efficient overall water splitting

Metal-organic frameworks (MOFs) display promising potential due to their exquisite structural advantages. Carboxylate-based MOFs, such as MIL-53 structures, attract a lot of attention among MOF families because of their remarkable stability in water and even alkaline condition. Hence, the delicate hierarchical microstructure is constructed by introducing MoO₄^2- into NH₂-MIL-53(NiFe) using a straightforward solvothermal strategy. The NiFeMo-MOF/NF electrode manifests a superior OER performance, producing an overpotential of 239 mV at 50 mA cm^-2 and a decent Tafel slope of 87.0 mV dec^-1. Furthermore, in a typical electrodeposition equipment, NiFeMo-MOF/NF is applied as the working electrode and the composite electrode named as (M) Ni-NiOOH/NF is generated by electrodeposition and electrooxidation process to assess HER performance, producing an overpotential of 119 mV at 50 mA cm^-2 and a decent Tafel slope of 58.3 mV dec^-1. The integrated electrolysis device delivers an extraordinarily low cell voltage of 1.50 V at 10 mA cm^-2 while applying NiFeMo-MOF/NF as the anode, (M)Ni-NiOOH/NF as the cathode for overall water splitting, exceeding the noble RuO₂/NF||Pt-C/NF (1.60 V@10 mA cm^-2). This study provides a promising design strategy for future electrolysis catalysts.

Water-Based Electrophoretic Deposition of Ternary Cobalt-Nickel-Iron Oxides on AISI304 Stainless Steel for Oxygen Evolution

Coatings consisting of cobalt, nickel and iron (Co-Ni-Fe) oxides were electrophoretically deposited on AISI 304-type stainless steel using aqueous suspensions without any binder. The synthesis of Co-Ni-Fe oxides was carried out by the thermal decomposition of metal nitrates with various molar ratios at 673 K. Structural and morphological analysis confirmed that the deposited coatings were mainly composed of spinel-type oxides with predominantly round-shaped particles. The prepared electrodes were examined for their electrocatalytic performance in oxygen generation under alkaline conditions. Various electrochemical techniques indicated the influence of iron content on the electrochemical activity of Co-Ni-Fe oxides, with the calculated values of the Tafel constant being in the range of 52–59 mV dec−1. Long-term oxygen generation for 24 h at 1.0 V revealed very good mechanical and electrocatalytic stability of the prepared electrodes, since they were able to maintain up to 98% of their initial activity.

Electric-Field Assisted Hydrolysis-Oxidation of MOFs: Hierarchical Ternary (Oxy)hydroxide Micro-Flowers for Efficient Electrocatalytic Oxygen Evolution

Water oxidation is the key process of electrocatalytic water splitting owing to its inherently slow kinetics. The ingenious design of microstructures for oxygen evolution reaction (OER) catalysts is an important way to accelerate the kinetics of the water splitting reaction. In this work, a facile electric-field assisted alkaline hydrolysis-oxidation strategy is proposed to prepare 3D layered micro-flowers in situ constructed from ultra-thin CoNiFe (oxy)hydroxide (CoNiFe-OH) hexagonal plates by using Co/Ni/Fe metal-organic frameworks (MOFs) as sacrificial templates and metal sources. The growth of the ballflowers can be accurately controlled by matching the hydrolysis rate of MOFs templates and the coprecipitation rate of metal ions. More importantly, continuous oxidation voltage can drive transformation of some hydroxides into oxyhydroxide with abundant oxygen vacancies. Benefiting from the open structure with multiple electroactive sites and optimized chemical composition, the layered CoNiFe-OH micro-flowers show appealing OER electrocatalytic performance with a low overpotential of 207 mV@10 mA cm^-2 and robust durability over 60 h. This work provides a strategy to prepare non-noble hierarchical nanostructured electrocatalysts for electrochemical energy conversion.

NiMoFe/Cu nanowire core-shell catalysts for high-performance overall water splitting in neutral electrolytes

A bifunctional NiMoFe/Cu NW core-shell catalyst assembled into a practical solar-driven overall water splitting system leads to an unprecedented solar-to-hydrogen (STH) efficiency of 10.99% in neutral electrolytes, attributed to the synergic combination of a unique 3D self-supported core-shell architecture and rapid electron/mass transfer properties.

Fe-CoP/C composite nanoplate derived from 2D porphyrin MOF as an efficient catalyst for oxygen evolution reaction

The 2D Fe-CoP/C composite transformed from 2D PPF-5-Fe/Co MOF presents a high activity for the oxygen evolution reaction in alkaline media.

Alkali-Metal-Mediated Reversible Chemical Hydrogen Storage Using Seawater

The economic viability and systemic sustainability of a green hydrogen economy are primarily dependent on its storage. However, none of the current hydrogen storage methods meet all the targets set by the US Department of Energy (DoE) for mobile hydrogen storage. One of the most promising routes is through the chemical reaction of alkali metals with water; however, this method has not received much attention owing to its irreversible nature. Herein, we present a reconditioned seawater battery-assisted hydrogen storage system that can provide a solution to the irreversible nature of alkali-metal-based hydrogen storage. We show that this system can also be applied to relatively lighter alkali metals such as lithium as well as sodium, which increases the possibility of fulfilling the DoE target. Furthermore, we found that small (1.75 cm²) and scaled-up (70 cm²) systems showed high Faradaic efficiencies of over 94%, even in the presence of oxygen, which enhances their viability.

Robust wrinkled MoS2/N-C bifunctional electrocatalysts interfaced with single Fe atoms for wearable zinc-air batteries

The ability to create highly efficient and stable bifunctional electrocatalysts, capable of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in the same electrolyte, represents an important endeavor toward high-performance zinc-air batteries (ZABs). Herein, we report a facile strategy for crafting wrinkled MoS₂/N-doped carbon core/shell nanospheres interfaced with single Fe atoms (denoted MoS₂@Fe-N-C) as superior ORR/OER bifunctional electrocatalysts for robust wearable ZABs with a high capacity and outstanding cycling stability. Specifically, the highly crumpled MoS₂ nanosphere core is wrapped with a layer of single-Fe-atom-impregnated, N-doped carbon shell (i.e., Fe-N-C shell with well-dispersed FeN₄ sites). Intriguingly, MoS₂@Fe-N-C nanospheres manifest an ORR half-wave potential of 0.84 V and an OER overpotential of 360 mV at 10 mA⋅cm^-2 More importantly, density functional theory calculations reveal the lowered energy barriers for both ORR and OER, accounting for marked enhanced catalytic performance of MoS₂@Fe-N-C nanospheres. Remarkably, wearable ZABs assembled by capitalizing on MoS₂@Fe-N-C nanospheres as an air electrode with an ultralow area loading (i.e., 0.25 mg⋅cm^-2) display excellent stability against deformation, high special capacity (i.e., 442 mAh⋅g^-1 _Zn), excellent power density (i.e., 78 mW⋅cm^-2) and attractive cycling stability (e.g., 50 cycles at current density of 5 mA⋅cm^-2). This study provides a platform to rationally design single-atom-interfaced core/shell bifunctional electrocatalysts for efficient metal-air batteries.

Bifunctional Catalyst Derived from Sulfur-Doped VMoOx Nanolayer Shelled Co Nanosheets for Efficient Water Splitting

A novel sulfur-doped vanadium-molybdenum oxide nanolayer shelling over two-dimensional cobalt nanosheets (2D Co@S-VMoO_x NSs) was synthesized via a facile approach. The formation of such a unique 2D core@shell structure together with unusual sulfur doping effect increased the electrochemically active surface area and provided excellent electric conductivity, thereby boosting the activities for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). As a result, only low overpotentials of 73 and 274 mV were required to achieve a current response of 10 mA cm^-2 toward HER and OER, respectively. Using the 2D Co@S-VMoO_x NSs on nickel foam as both cathode and anode electrode, the fabricated electrolyzer showed superior performance with a small cell voltage of 1.55 V at 10 mA cm^-2 and excellent stability. These results suggested that the 2D Co@S-VMoO_x NSs material might be a potential bifunctional catalyst for green hydrogen production via electrochemical water splitting.

Facing Seawater Splitting Challenges by Regeneration with Ni-Mo-Fe Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution

Hydrogen, produced by water splitting, has been proposed as one of the main green energy vectors of the future if produced from renewable energy sources. However, to substitute fossil fuels, large amounts of pure water are necessary, scarce in many world regions. In this work, we fabricate efficient and earth-abundant electrodes, study the challenges of using real seawater, and propose an electrode regeneration method to face undesired salt deposition. Ni-Mo-Fe trimetallic electrocatalyst is deposited on non-expensive graphitic carbon felts both for hydrogen (HER) and oxygen evolution reactions (OER) in seawater and alkaline seawater. Cl^- pitting and the chlorine oxidation reaction are suppressed on these substrates and alkalinized electrolyte. Precipitations on the electrodes, mainly CaCO₃ , originating from seawater-dissolved components have been studied, and a simple regeneration technique is proposed to rapidly dissolve undesired deposited CaCO₃ in acidified seawater. Under alkaline conditions, Ni-Mo-Fe-based catalyst is found to reconfigure, under cathodic bias, into Ni-Mo-Fe alloy with a cubic crystalline structure and Ni : Fe(OH)₂ redeposits whereas, under anodic bias, it is transformed into a follicular Ni:FeOOH structure. High productivities over 300 mA cm^-2 and voltages down to 1.59 V@10 mA cm^-2 for the overall water splitting reaction have been shown, and electrodes are found stable for over 24 h without decay in alkaline seawater conditions and with energy efficiency higher than 61.5 % which makes seawater splitting promising and economically feasible.

One-Way Continuous Deposition of Monolayer MXene Nanosheets for the Formation of Two Confronting Transparent Electrodes in Flexible Capacitive Photodetector

MXenes based on titanium carbide are promising next-generation transparent electrode materials due to their high metallic conductivity, optical transparency, mechanical flexibility, and abundant hydrophilic surface functionality. MXene electrodes offer a much wider conductive surface coverage than metal nanowires, thereby gaining popularity as flexible electrode materials in supercapacitors and energy devices. However, given that monolayer MXene nanosheets are only a few nanometers thick, meticulous surface treatments and deposition technologies are required for a practical implementation of these transparent electrodes. Unfortunately, a capacitor produced by forming high-quality transparent MXene electrodes on both sides of a film has not yet been reported. We report the successful development of a one-way continuous deposition technology to form high-quality MXene nanosheet-based transparent electrodes on both surfaces of a polymer film without large physical stresses on the MXene nanosheets. One transparent electrode was formed by transferring MXene nanosheets predeposited on a temporary glass substrate to the film surface, while the other was directly deposited on the exposed film surface. The Ti₃AlC₂ precursor (MAX) was synthesized via a spark plasma sintering crystallization, and the MXene nanosheets were prepared via a subsequent Al-selective etching and delamination. We used this material to implement a capacitive photodetector consisting of two layers of opposing transparent electrodes. The flexible photodetector was based on poly(vinyl butyral) (PVB), which was solidly bonded with MXene nanosheets to serve as a free-standing binder for the Cu-doped ZnS semiconductor particles. The fabricated device exhibited excellent mechanical stability due to the high affinity between the MXene nanosheets and PVB. Furthermore, the device exhibited an initial capacitance of 2 nF, photosensitivity of 12.5 μF/W, and rise and decay times of 0.031 and 0.751 s, respectively. All these parameters were 1 to 2 orders of magnitude higher or faster than reported capacitive photodetectors. Overall, the proposed approach resolves the core issues associated with existing metal nanowire-based electrodes, and it is a breakthrough in the development of next-generation flexible devices comprising two layers of confronting transparent electrodes.

Synergistically Integrating Nickel Porous Nanosheets with 5d Transition Metal Oxides Enabling Efficient Electrocatalytic Overall Water Splitting

An integration hydrogen adsorption benign component such as a metal with an oxygen-containing reactant adsorption benign component such as metal oxide allows for efficient overall water splitting in alkaline solutions and yet remains a considerable challenge. Herein, 5d transition metal oxide WO₂ and WO₃ (denoted as WO_x) nanoparticles are purposely integrated with a porous Ni nanosheet array grown on nickel foam (NF) to design a strongly coupled Ni/WO_x/NF porous nanosheet array electrocatalyst. Through the anion exchange of Ni(OH)₂ nanosheets with tungstate, followed by hydrogenation treatment, abundant Ni/WO_x interfaces with strong coupling interaction are generated. Benefiting from the strong synergies between Ni and WO_x and the unique nanostructure, Ni/WO_x/NF only requires the overpotentials of 42 mV for hydrogen evolution reaction (HER) and 395.7 mV for oxygen evolution reaction (OER) to achieve the current densities of 10 and 100 mA cm^-2, respectively. Furthermore, the Ni/WO_x/NF can achieve a current density of 10 mA cm^-2 at a low cell voltage of 1.54 V in a two-electrode system. This work opens a novel avenue for the design of high-performance but low-cost electrocatalysts for overall water splitting.

A Trimetallic Cobalt/Iron/Nickel Phytate Catalyst for Overall Water Splitting: Fabrication by Magnetic-Field-Assisted Bipolar Electrodeposition

Electrodeposition is an effective method to prepare various materials. We have established a bipolar electrodeposition system assisted by a constant magnetic field to fabricate a Co/Fe/Ni phytate catalyst with good electrocatalytic activity for overall water splitting. The effects of magnetic and electric fields on the catalytic properties of the material were studied. The catalyst prepared with an N-pole magnetic field (NPMF) exhibited good overall water splitting performance. Benefiting from the synergistic effect of the Co/Fe/Ni-phytate and the advantages of the N-pole magnetic field the NPMF electrode has a continuous 25 hours high-efficiency hydrogen evolution and oxygen evolution reaction at a current density of 100 mA cm^-2 in1.0 M KOH compared with commercial RuO₂ and Pt/C. Bipolar electrodeposition with a constant magnetic field is thus an efficient means to fabricate electrocatalytic water splitting catalysts.

Low-cost and multi-level structured NiFeMn alloy@NiFeMn oxyhydroxide electrocatalysts for highly efficient overall water splitting

NiFeMn alloy@NiFeMn oxyhydroxide was fabricated by electrodeposition, which reveals exceptional electrocatalytic property toward overall water splitting owing to the extraordinary multi-level structure.

Facile formation of Fe-doped NiCoP hollow nanocages as bifunctional electrocatalysts for overall water splitting

Rational design of electrocatalysts with unique morphological structures and chemical compositions is crucial for electrochemical performance and energy storage capacity.

Metal–organic frameworks and their derivatives as electrocatalysts for the oxygen evolution reaction

This review summarizes the recent progress on MOFs and their derivatives used for OER electrocatalysis in terms of their morphology, composition and structure–performance relationship.

The NHx Group Induced Formation of 3D α-Co(OH)2 Curly Nanosheet Aggregates as Efficient Oxygen Evolution Electrocatalysts

Recently, the curly structure attracts researchers' attention due to the strain effect, electronic effect, and improved surface area, which exhibits enhanced electrocatalytic activity. However, the synthesis of metastable curved structures is very difficult. Herein, a simple room temperature coprecipitation method is proposed to synthesize 3D cobalt (Co) hydroxide (α-Co(OH)₂ ) electrocatalysts that consist of curly 2D nanosheets. The formation process of curly nanosheets is elaborated systematically and the results demonstrate that the NH_x group has great effect on the formation of curly structure. Combining the advantage of 2D curly nanosheet and 3D aggregate structure, the as-prepared α-Co(OH)₂ curly nanosheet aggregates show the best water oxidation activity with an overpotential of 269 mV at j = 10 mA cm^-2 in 1.0 m KOH. The electrocatalytic process studies demonstrate that the formation of Co^IV O species is the rate-determining step. Theoretical calculations further confirm the beneficial effect of the bent structure on the conductivity, the adsorption of OH^- and the formation of OOH* species.