Structure Architecting for Salt-Rejecting Solar Interfacial Desalination to Achieve High-Performance Evaporation With In Situ Energy Generation

Supramolecular Modification of Graphene Sponge with a Porphyrin Derivative Enhances the Photothermal Conversion Efficiency of a Solar Steam Generator

Solar energy seems to be a promising solution for obtaining clean water from saltwater and wastewater. With the solar steam generator system, it is possible to effectively acquire clean water from wastewater with a low-cost, sustainable, and environmentally friendly approach. In this study, PRF/GGSM, prepared by modification of gradient graphene sponge material (GGSM) with porphyrin derivative supramolecules (PRF), was investigated as a photothermal material for solar steam generation. PRF/GGSM possessing graphene and PRF served as ideal solar thermal converters that could easily gather sunlight. This material owing to its microporous and gradient hydrophilic structure has achieved a solar thermal conversion efficiency of up to 92% under 1 sun, corresponding to the water evaporation rate of 3.8 kg h-1 m-2. Moreover, this study exhibited that PRF/GGSM can efficiently generate clean water from seawater, wastewater, and even concentrated acid and alkali solutions.

Simultaneous Salt Rejection and Heat Localization Via Engineering Macrochannels in Morning Glory-Shaped 3D Evaporator

Solar desalination is a promising solution for alleviating water scarcity due to its low-cost, environmentally friendly, and off-grid capabilities. However, simultaneous salt rejection and heat localization remain challenging, as the rapid salt convection often results in considerable heat loss. Herein, this challenge is overcome via a facile design: i) isolating high-temperature and high-salt zones by rationally designing morning glory-shaped wick structures and ii) bridging high-salt zones and bulk water with low-tortuosity macrochannels across low-temperature surfaces. The salinity gradient in the macrochannels passively triggers convective flow, facilitating the rapid transfer of salt ions from the high-salt zone to the bulk water. Meanwhile, the macrochannels are spatially isolated from the high-temperature zone, preventing heat loss during salt convection and thereby achieving a high evaporation rate (≈3 kg m-2 h-1) and superior salt rejection even in highly concentrated real seawater. This work provides new insights into salt rejection strategies and advances practical applications for sustainable seawater desalination.

Tortuosity Engineering of Water Channels to Customized Water Supply for Enhancing Hydrogel Solar Evaporation

Hydrogel as a solar evaporator shows great potential in freshwater production. However, hydrogels often lead to an imbalance between solar energy input and water supply management due to their excessively high saturated water content. Thus, achieving a stable water-energy-balance in hydrogel evaporators remains challenging. Here, by tortuosity engineering designed water transport channels, a seamless high-tortuosity/low-tortuosity/high-tortuosity structured hydrogel (SHLH structure hydrogel) evaporator is developed, which enables the hydrogel with customized water transport rate, leading to the controlled water supply at the evaporator interface. An excellent equilibrium between the photothermal conversion and water supply is established, and the maximum utilization of solar energy is realized, thereby achieving an excellent evaporation rate of 3.64 kg m-2 h-1 under one solar illumination. This tortuosity engineering controlled SHLH structured evaporator provides a novel strategy to attain water-energy-balance and expands new approaches for constructing hydrogel-based evaporators with tailored water transportation capacity.

Low vaporization enthalpy of modified chitosan hydrogel for high performance solar evaporator

The high vaporization enthalpy of water attributed to the strong hydrogen bonds between water molecules is limiting the performance of solar evaporators. This work demonstrates a deliberate attempt to significantly reduce the vaporization enthalpy of water through the introduction of weak water-amine hydrogen bond interactions in hydrogel evaporators. In this article, bio-based chitosan-agarose/multiwalled carbon nanotube hydrogel film evaporators (CAMFEs) exhibit larger vaporization enthalpy reduction with the presence of primary amine groups in chitosan. An interplay between vaporization enthalpy reduction and water diffusivity leads to an optimal ratio of chitosan to agarose = 7:1 (CAMFE7) showing an impressive evaporation rate of 4.13 kg m-2 h-1 under 1 sun irradiation. CAMFE7 also exhibits excellent salt resistance, with a stable water evaporation rate, using brine water of up to 10 % salinity under continuous 1 sun irradiation. The high mechanical robustness together with its scalability makes CAMFE7 a highly promising material for practical drinking water production.

An in-depth study of integrating cascaded photocatalytic H2O2 generation and activation with solar-driven interfacial evaporation for in-situ organic contaminant remediation

Integrating cascaded photocatalytic H2O2 generation and subsequent activation of H2O2 (into ·OH radicals) with solar-driven interfacial evaporation techniques offers an effective and sustainable approach for in-situ treating water contaminated with organic substances. Unlike traditional water-dispersed catalysts, the interfacial evaporation approach presents unique challenges in photocatalytic reactions. We explored these dynamics using an AgI/PPy/MF interfacial photothermal set, achieving H2O2 production efficiency (approximately 1.53 mM/g/h) - three times higher than submerged counterparts. This efficiency is attributed to exceptional solar light absorption (about 95 %), a significant surface photothermal effect (raising temperatures by approximately 36 °C), and enhanced oxygen availability (38 times more than in water), all characteristic of the interfacial system. The in-situ activation of H2O2 into ·OH notably improves the degradation of organic pollutants, achieving up to 99 % removal efficiency. This comprehensive analysis highlights the potential of combining photocatalytic H2O2 processes with interfacial evaporation for efficiently purifying organically polluted water.

Photo-Fenton-Active MIL-88A/CNT-Based PVA Hydrogel for Solar-Driven Water Evaporation and Simultaneous Volatile Organic Compound Removal

Solar-driven interfacial water evaporation (SIWE) has emerged as a promising avenue for cost-effective freshwater production from seawater or wastewater. However, the simultaneous evaporation of volatile organic compounds (VOCs) presents a limitation for the widespread implementation of this technique. Thus, developing dual-functional evaporators capable of both desalining seawater and degrading VOCs is challenging. Herein, we fabricated an iron-based metal-organic framework MIL-88A/carbon nanotubes (CNTs) poly(vinyl alcohol) hydrogel (MCH) evaporator via the conventional freezing method for solar-driven seawater desalination and simultaneous photo-Fenton VOC degradation. Because of the superior photothermal conversion capability of CNTs, reduced thermal conductivity and water evaporation enthalpy within the hydrogel, and the photo-Fenton activity of rod-shaped MIL-88A, the MCH evaporator exhibits a higher evaporation rate of 2.26 kg m-2 h-1 under 1 sun illumination with simultaneous VOC degradation. The higher hydrophilicity and vertical channels in the MCH evaporator enable its self-salt cleaning ability, facilitating consistent seawater desalination, even in high salt concentrations up to 10 wt %. The synergistic effects of localized heating from CNTs and hydrogen peroxide activation through reactive sites of MIL-88A allow the MCH evaporator to degrade more than 93% of the added phenol during evaporation. This work presents a sustainable and efficient approach for solar-driven seawater desalination, offering simultaneous VOC degradation.

Hierarchical Ti3C2/BiVO4 microcapsules for enhanced solar-driven water evaporation and photocatalytic H2 evolution

Desalination processes frequently require a lot of energy to generate freshwater and energy, which depletes resources. Their reliance on each other creates tension between these two vital resources. Herein, hierarchical MXene nanosheets and bismuth vanadate (Ti3C2/BiVO4)-derived microcapsules were synthesized for a photothermal-induced photoredox reaction for twofold applications, namely, solar-driven water evaporation and hydrogen (H2) production. For this purpose, flexible aerogels were fabricated by introducing Ti3C2/BiVO4 microcapsules in the polymeric network of natural rubber latex (NRL-Ti3C2/BiVO4), and a high evaporation rate of 2.01 kg m-2 h-1 was achieved under 1-kW m-2 solar intensity. The excellent performance is attributed to the presence of Ti3C2/BiVO4 microcapsules in the polymeric network, which provides balanced hydrophilicity and broadband sun absorption (96 %) and is aimed at plasmonic heating with microscale thermal confinement tailored by heat transfer simulations. Notably, localized plasmonic heating at the catalyst active sites of the Ti3C2/BiVO4 heterostructure promotes enhanced photocatalytic H2 production evolved after 4 h of reaction is 9.39 μmol, which is highly efficient than pure BiVO4 and Ti3C2. This method turns the issue of water-fuel crisis into a collaborative connection, presenting avenues to collectively address the anticipated demand rather than fostering competition.

Numerical Simulation Technologies in Solar-Driven Interfacial Evaporation Processes

Solar interfacial evaporation technology has the advantages of environmentally conscious and sustainable benefits. Recent research on light absorption, water transportation, and thermal management has improved the evaporation performance of solar interfacial evaporators. However, many studies on photothermal materials and structures only aim to improve performance, neglecting explanations for heat and mass transfer coupling or providing evidence for performance enhancement. Numerical simulation can simulate the diffusion paths and heat and water transfer processes to understand the thermal and mass transfer mechanism, thereby better achieving the design of efficient solar interfacial evaporators. Therefore, this review summarizes the latest exciting findings and tremendous advances in numerical simulation for solar interfacial evaporation. First, it presents a macroscopic summary of the application of simulation in temperature distribution, salt concentration distribution, and vapor flux distribution during evaporation. Second, the utilization of simulation in the microscopic is summed up, specifically focusing on the movement of water molecules and the mechanisms of light responses during evaporation. Finally, all simulation methods have the goal of validating the physical processes in solar interfacial evaporation. It is hoped that the use of numerical simulation can provide theoretical guidance and technical support for the application of solar-driven interfacial evaporation technology.

Cost Effective Photothermal Materials Selection for Direct Solar-Driven Evaporation

The cornerstone of eco-friendly and affordable freshwater generation lies in harnessing solar energy for water evaporation. This process involves extracting vapor from liquid water using solar energy. Numerous innovative, low-cost materials have been proposed for this purpose. These materials aim to enable highly controllable and efficient conversion of solar energy into thermal energy while maintaining high cost-effectiveness. Here, in this review paper, we outline the advancements in solar-driven evaporation technology with a focus on optimizing synthesis methods and materials cost. It prioritizes refining evaporation efficiency and affordability using inventive manufacturing methods. By utilizing innovative reasonably priced materials, this process not only ensures efficient resource utilization but also fosters technological advancements in renewable energy applications. Moreover, the affordability of these materials makes solar-powered water evaporation accessible to a wider range of communities, empowering them to address water scarcity challenges.

Recent Advances in High-Rate Solar-Driven Interfacial Evaporation

Recent advances in solar-driven interfacial evaporation (SDIE) have led to high evaporation rates that open promising avenues for practical utilization in freshwater production and industrial application for pollutant and nutrient concentration, and resource recovery. Breakthroughs in overcoming the theoretical limitation of 2D interfacial evaporation have allowed for developing systems with high evaporation rates. This study presents a comprehensive review of various evaporator designs that have achieved pure evaporation rates beyond 4 kg m-2 h-1, including structural and material designs allowing for rapid evaporation, passive 3D designs, and systems coupled with alternative energy sources of wind and joule heating. The operational mechanisms for each design are outlined together with discussion on the current benefits and areas for improvement. The overarching challenges encountered by SDIE concerning the feasibility of direct integration into contemporary practical settings are assessed, and issues relating to sustaining elevated evaporation rates under diverse environmental conditions are addressed.

Bioinspired 1T-MoS2-based aerogel beads for efficient freshwater harvesting in harsh environments

Freshwater scarcity is one of the most critical issues worldwide, particularly in arid regions, stemming from population growth and climate change. Inspired by the hydrophilic bump structures of desert beetles, 1T-MoS2-based aerogel beads with porous structures and CaCl2-crystal loading (termed as MoAB-m@CaCl2-n) were prepared for freshwater harvesting. Metallic-phase MoS2 nanospheres exhibit excellent photothermal conversion abilities, facilitating solar-driven water desorption and evaporation. Owing to the synergistic effect of its localized surface features, hydrophilic groups, and dispersive CaCl2 particles, MoAB-2@CaCl2-2 efficiently harvests water from atmosphere with a superior moisture adsorption capacity (0.18-0.82 g g-1) at a wide range of relative humidity (10 %-70 %). Under one-sun illumination, MoAB-2@CaCl2-2 demonstrates an outstanding solar-driven water evaporation rate of 2.25 kg m-2h-1. The water evaporation rate from soil (water content = 20 %) is 1.19 kg m-2h-1, which is sufficient for sustainable freshwater generation from the soil in arid regions. More importantly, the multifunctional MoAB-2@CaCl2-2-based homemade freshwater generation prototype delivers a certain amount of water harvesting (0.99 g g-1 day-1) on a rainy day and provides an impressive daily freshwater yield (53.7 kg m-2) under natural sunlight. The integrated device exhibits excellent efficiency and practicality and offers a feasible method for freshwater harvesting in harsh environments.

Design and fabrication of porous three-dimensional Ag-doped reduced graphene oxide (3D Ag@rGO) composite for interfacial solar desalination

Solar-driven interfacial desalination technology has shown great promise in tackling the urgent global water scarcity crisis due to its ability to localize heat and its high solar-to-thermal energy conversion efficiency. For the realization of sustainable saline water desalination, the exploration of novel photothermal materials with higher water vapor generation and photothermal conversion efficiency is indispensable. In the current study, a novel 3D interconnected monolithic Ag-doped rGO network was synthesized for efficient photothermal application. The Ultraviolet-Visible-Near Infrared (UV-Vis-NIR) and FTIR analyses demonstrated that the controlled hydrothermal reduction of GO enabled the restoration of the conjugated sp2 bonded carbon network and the subsequent electrical and thermal conductivity through a significant reduction of oxygen-containing functional groups while maintaining the hydrophilicity of the composite photothermal material. In the solar simulated interfacial desalination study conducted using 3.5 wt.% saline water, the average surface temperatures of the 3D material increased from 27.1 to 54.7 °C in an hour, achieving an average net dark-excluded evaporation rate of 1.40 kg m-2 h-1 and a photothermal conversion efficiency of ~ 97.54% under 1 sun solar irradiance. In the outdoor real-world application test carried out, the surface temperature of the 3D solar evaporator reached up to 60 °C and achieved a net water evaporation rate of 1.50 kg m-2 h-1 under actual solar irradiation. The 3D interwoven porous hierarchical evaporator displayed no salt precipitation over the 54-h period monitored, demonstrating the promising salt rejection and real-world application potential for efficient desalination of saline water.

Quasi-waffle solar distiller for durable desalination of seawater

Water purification via interfacial solar steam generation exhibits promising potential. However, salt crystallization on evaporators reduces solar absorption and obstructs water supply. To address it, a waffle-shaped solar evaporator (WSE) has been designed. WSE is fabricated via a zinc-assisted pyrolysis route, combining low-cost biomass carbon sources, recyclable zinc, and die-stamping process. This route enables cost-effective production without the need of sophisticated processing. As compared to conventional plane-shaped evaporators, WSE is featured by extra sidewalls for triggering the convection with the synergistic solute and thermal Marangoni effects. Consequently, WSE achieves spontaneous salt rejection and durable evaporation stability. It has demonstrated continuous operation for more than 60 days in brine without fouling.

Flexible Janus Black Silicon Photothermal Conversion Membranes for Highly Efficient Solar-Driven Interfacial Water Purification

Photothermal conversion materials are critical in the development of solar-driven interfacial evaporation techniques; however, achieving a high energy conversion efficiency remains challenging owing to the high cost and instability of light-absorbing materials, in addition to the difficulties of simultaneously improving light absorption while suppressing heat loss. A black silicon (Si) powder with a porous structure was prepared by chemical etching of a low-cost commercial micron-sized Al-Si alloy, and a flexible Janus black Si photothermal conversion membrane was constructed. The partially broken spherical particles and porous structure obtained after etching enhanced the refraction of light from the Si powder, imparting the prepared membrane with an average light absorption rate of 95.95% over the solar spectrum. Evaporation from the membrane increased the intermediate water content and reduced the equivalent evaporation enthalpy. The thermal conduction loss was inhibited through a one-dimensional water transport structure, and the membrane achieved a water evaporation rate of 2.17 kg m-2 h-1 and a photothermal efficiency of 94.95% under 1 sun illumination. Benefiting from the broadband absorption and high photothermal efficiency of black Si powder, surface modification of hydrophobic polydimethylsiloxane, and directional salt-out structure design, the evaporation rate of the Janus black Si membrane-based system in a 10% NaCl solution was maintained >2.10 kg m-2 h-1 after 7 days of continuous evaporation cycles. The removal rate of metal ions from simulated seawater and from practical wastewater containing complex heavy metals reached >99.9%, indicating the promising potential of black Si membrane for application in solar-driven interfacial water purification.

Developing Salt-Rejecting Evaporators for Solar Desalination: A Critical Review

Solar desalination, a green, low-cost, and sustainable technology, offers a promising way to get clean water from seawater without relying on electricity and complex infrastructures. However, the main challenge faced in solar desalination is salt accumulation, either on the surface of or inside the solar evaporator, which can impair solar-to-vapor efficiency and even lead to the failure of the evaporator itself. While many ideas have been tried to address this ″salt accumulation″, scientists have not had a clear system for understanding what works best for the enhancement of salt-rejecting ability. Therein, for the first time, we classified the state-of-the-art salt-rejecting designs into isolation strategy (isolating the solar evaporator from brine), dilution strategy (diluting the concentrated brine), and crystallization strategy (regulating the crystallization site into a tiny area). Through the specific equations presented, we have identified key parameters for each strategy and highlighted the corresponding improvements in the solar desalination performance. This Review provides a semiquantitative perspective on salt-rejecting designs and critical parameters for enhancing the salt-rejecting ability of dilution-based, isolation-based, and crystallization-based solar evaporators. Ultimately, this knowledge can help us create reliable solar desalination solutions to provide clean water from even the saltiest sources.

Cellulose-based bi-layer hydrogel evaporator with a low evaporation enthalpy for efficient solar desalination

Interfacial evaporation through hydrogel-based evaporators is emerging as a sustainable and cost-effective strategy for drinkable water production. Herein, a specially designed bi-layer hydrogel evaporator was fabricated and used for efficient solar water desalination. With cotton linter as cellulose precursor, it was dispersed in a highly concentrated ZnCl2 (65 %) solution, and cross-linked by epichlorohydrin to prepare cellulose composite hydrogel. After removing inorganic salts by salt-leaching, polyaniline (PANi) with broadband and wide-range light absorption was then integrated into the top surface of hydrogel through in situ polymerization to construct a bi-layer evaporator. As a solar evaporator, the water could be evaporated with a low-energy demand, and the heat from the sunlight could be confined at the interface to achieve efficient water evaporation. Therefore, the hydrogel evaporator demonstrates an optimal water evaporation rate of 3.02 kg m-2 h-1 and photothermal conversion efficiency of 89.09 % under 1 sun (1 kW m-2) irradiation. This work provides new possibilities for efficient solar water purification systems with assured water quality.

Making Nanofiber Membrane Stand on End to Construct Vertically Interfacial Evaporators for Efficient Solar Evaporation, Omnidirectional Solar Absorption, and Ultrahigh-Salinity Brine Desalination

Solar-driven interfacial desalination is widely considered to be a promising technology to address the global water crisis. This study proposes a novel electrospun nanofiber-based all-in-one vertically interfacial solar evaporator endowed with a high steam generation rate, steady omnidirectional evaporation, and enduring ultrahigh-salinity brine desalination. In particular, the electrospun nanofiber is collected into the tubular structure, followed by spraying with a dense crosslinked poly(vinyl alcohol) film, which renders them sufficiently strong for the preparation of a vertically array evaporator. The integrated evaporator made an individual capillary as a unit to form multiple thermal localization interfaces and steam dissipation channels, realizing zone heating of water. Thus a high steam generation rate exceeding 4.0 kg m-2 h-1 in pure water is demonstrated even under omnidirectional sunlight, and outperforms existing evaporators. Moreover, salt ions in the photothermal layer can be effectively transported to the water in capillaries and subsequently exchanged with the bulk water due to the strong action of capillary force, which ensures an ultrahigh desalination rate (≈12.5 kg m-2 h-1 under 3 sun) in 25 wt% concentration brine over 300 min. As such, this work provides a meaningful roadmap for the development of state-of-the-art solar-driven interfacial desalination.

Bioinspired Solar-Driven Osmosis for Stable High Flux Desalination

The growing global water crisis necessitates sustainable desalination solutions. Conventional desalination technologies predominantly confront environmental issues such as high emissions from fossil-fuel-driven processes and challenges in managing brine disposal during the operational stages, emphasizing the need for renewable and environmentally friendly alternatives. This study introduces and assesses a bioinspired, solar-driven osmosis desalination device emulating the natural processes of mangroves with effective contaminant rejection and notable productivity. The bioinspired solar-driven osmosis (BISO) device, integrating osmosis membranes, microporous absorbent paper, and nanoporous ceramic membranes, was evaluated under different conditions. We conducted experiments in both controlled and outdoor settings, simulating seawater with a 3.5 wt % NaCl solution. With a water yield of 1.51 kg m-2 h-1 under standard solar conditions (one sun), the BISO system maintained excellent salt removal and accumulation resistance after up to 8 h of experiments and demonstrated great cavitation resistance even at 58.14 °C. The outdoor test recorded a peak rate of 1.22 kg m-2 h-1 and collected 16.5 mL in 8 h, showing its practical application potential. These results highlight the BISO device's capability to address water scarcity using a sustainable approach, combining bioinspired design with solar power, presenting a viable pathway in renewable-energy-driven desalination technology.

Super-hydrophilic LaCoO3/g-C3N4 nanocomposite coated beauty sponge for solar-driven seawater desalination with simultaneous volatile organic compound removal

Interfacial solar steam generation (ISSG) is emerging as a promising, environment-friendly solution for fulfilling freshwater and energy demands. However, a critical challenge for ISSG lies in the presence of harmful volatile organic compounds (VOCs) in the feedwater which are co-evaporated with water, leading to more enriched concentration in condensed water. Herein, lanthanum cobaltate-graphitic carbon nitride (LaCoO3/g-C3N4, LCO/g-CN) nanocomposite decorated beauty sponge (LCO/g-CN@BS) is proposed as an efficient photothermal/photocatalytic material for solar-driven seawater desalination and simultaneous VOC degradation. The hydrophobic surface of the beauty sponge after LCO/g-CN coating becomes super-hydrophilic, ensuring sufficient water supply and our LCO/g-CN@BS delivers an evaporation rate of 1.94 kg m-2 h-1 under 1 sun irradiation. This LCO/g-CN@BS shows excellent seawater desalination capacity with a self-cleaning ability when employed for saltwater purification for a salt (NaCl) concentration as high as 15 wt%. Moreover, fast photocarrier transfer between LCO and g-CN leads to enhanced photocatalytic degradation of over 90% of phenol simultaneously, which is about 60% for only an LCO-based beauty sponge. This work presents a promising approach to combining novel nanocomposites with microporous structures for efficient solar desalination, offering simultaneous VOC degradation.

Unipolar Solution Flow in Calcium-Organic Frameworks for Seawater-Evaporation-Induced Electricity Generation

Seawater-flow- and -evaporation-induced electricity generation holds significant promise in advancing next-generation sustainable energy technologies. This method relies on the electrokinetic effect but faces substantial limitations when operating in a highly ion-concentrated environment, for example, natural seawater. We present herein a novel solution using calcium-based metal-organic frameworks (MOFs, C12H6Ca2O19·2H2O) for seawater-evaporation-induced electricity generation. Remarkably, Ca-MOFs show an open-circuit voltage of 0.4 V and a short-circuit current of 14 μA when immersed in seawater under natural conditions. Our experiments and simulations revealed that sodium (Na) ions selectively transport within sub-nanochannels of these synthetic superhydrophilic MOFs. This selective ion transport engenders a unipolar solution flow, which drives the electricity generation behavior in seawater. This work not only showcases an effective Ca-MOF for electricity generation through seawater flow/evaporation but also contributes significantly to our understanding of water-driven energy harvesting technologies and their potential applications beyond this specific context.

Sustainable Seawater Desalination and Energy Management: Mechanisms, Strategies, and the Way Forward

Solar-driven desalination systems have been recognized as an effective technology to address the water crisis. Recently, evaporators prepared based on advanced manufacturing technologies have emerged as a promising tool in enhancing ocean energy utilization. In this review, we discussed the thermal conversion, energy flow, salt deposition mechanisms, and design strategies for solar-driven desalination systems, and explored how to improve the desalination performance and energy use efficiency of the systems through advanced manufacturing technologies. In future perspectives, we determined the feasibility of coupling solar-driven solar desalination systems with multi-stage energy utilization systems and emerging artificial intelligence technologies, for which conclusions are given and new directions for future desalination system development are envisioned. Finally, exciting opportunities and challenges in the face of basic research and practical implementation are discussed, providing promising solutions and blueprints for green and novel desalination technologies while achieving sustainable development.

Enhanced Photothermal Effect Assisted by Resonance Energy Transfer in Carbon/Covellite Core-Shell Nanoparticles toward a High-Performance Interfacial Water Evaporation Process

Carbon and semiconductor nanoparticles are promising photothermal materials for various solar-driven applications. Inevitable recombination of photoinduced charge carriers in a single constituent, however, hinders the realization of a greater photothermal effect. Core-shell heterostructures utilizing the donor-acceptor pair concept with high-quality interfaces can inhibit energy loss from the radiation relaxation of excited species, thereby enhancing the photothermal effect. Here, core-shell structures composed of a covellite (CuS) shell (acceptor) and spherical carbon nanoparticle (CP) core (donor) (abbreviated as CP/CuS) are proposed to augment the photothermal conversion efficiency via the Förster resonance energy transfer (FRET) mechanism. The close proximity and spectral overlap of the donor and acceptor trigger the FRET mechanism, where the electronic excitation relaxation energy of the CP reinforces the plasmonic resonance and near-infrared absorption in CuS, resulting in boosting the overall photothermal conversion efficiency. CP/CuS core-shell coated on polyurethane (PU) foam exhibits a total solar absorption of 97.1%, leading to an elevation in surface temperature of 61.6 °C in dry conditions under simulated solar illumination at a power density of 1 kW m-2 (i.e., 1 sun). Leveraging the enhanced photothermal conversion emanated from the energy transfer effect in the core-shell structure, CP/CuS-coated PU foam achieves an evaporation rate of 1.62 kg m-2 h-1 and an energy efficiency of 93.8%. Thus, amplifying photothermal energy generation in core-shell structures via resonance energy transfer can be promising in solar energy-driven applications and thus merits further exploration.

Ionization Engineering of Hydrogels Enables Highly Efficient Salt-Impeded Solar Evaporation and Night-Time Electricity Harvesting

Interfacial solar evaporation holds immense potential for brine desalination with low carbon footprints and high energy utilization. Hydrogels, as a tunable material platform from the molecular level to the macroscopic scale, have been considered the most promising candidate for solar evaporation. However, the simultaneous achievement of high evaporation efficiency and satisfactory tolerance to salt ions in brine remains a challenging scientific bottleneck, restricting the widespread application. Herein, we report ionization engineering, which endows polymer chains of hydrogels with electronegativity for impeding salt ions and activating water molecules, fundamentally overcoming the hydrogel salt-impeded challenge and dramatically expediting water evaporating in brine. The sodium dodecyl benzene sulfonate-modified carbon black is chosen as the solar absorbers. The hydrogel reaches a ground-breaking evaporation rate of 2.9 kg m-2 h-1 in 20 wt% brine with 95.6% efficiency under one sun irradiation, surpassing most of the reported literature. More notably, such a hydrogel-based evaporator enables extracting clean water from oversaturated salt solutions and maintains durability under different high-strength deformation or a 15-day continuous operation. Meantime, on the basis of the cation selectivity induced by the electronegativity, we first propose an all-day system that evaporates during the day and generates salinity-gradient electricity using waste-evaporated brine at night, anticipating pioneer a new opportunity for all-day resource-generating systems in fields of freshwater and electricity.

Wood Lamella-Inspired Photothermal Stearic Acid-Eutectic Gallium-Indium-Based Phase Change Aerogel for Thermal Management and Infrared Stealth

Eutectic Gallium-Indium (EGaIn) liquid metal is an emerging phase change metal material, but its low phase transition enthalpy and low light absorption limit its application in photothermal phase change energy storage materials (PCMs) field. Here, based on the dipole layer mechanism, stearic acid (STA)-EGaIn-based PCMs which exhibit extraordinary solar-thermal performance and phase change enthalpy are fabricated by ball milling method. The wood lamella-inspired cellulose-derived aerogel and molybdenum disulfide (MoS2 ) are used to support the PCMs by the capillary force and decrease the interfacial thermal resistance. The resulted PCMs achieved excellent photothermal conversion performance and leakage proof. They  have excellent thermal conductivity of 0.31 W m-1 K-1 (this is increased by 138% as compared with pure STA), and high phase change enthalpy of187.50 J g-1 , which is higher than the most of the reported PCMs. Additionally, the thermal management system and infrared stealth materials based on the PCMs are developed. This work provides a new way to fabricate smart EGaIn-based PCMs for energy storage device thermal management and infrared stealth.

A Multifunctional Asymmetric Fabric for Sustained Electricity Generation from Multiple Sources and Simultaneous Solar Steam Generation

Harvesting electrical energy from water and moisture has emerged as a novel ecofriendly energy conversion technology. Herein, a multifunctional asymmetric polyaniline/carbon nanotubes/poly(vinyl alcohol) (APCP) that can produce electric energy from both saline water and moisture and generate fresh water simultaneously is developed. The constructed APCP possesses a negatively charged porous structure that allows continuous generation of protons and ion diffusion through the material, and a hydrophilicity-hydrophobic interface which results in a constant potential difference and sustainable output. A single APCP can maintain stable output for over 130 h and preserve a high voltage of 0.61 V, current of 81 µA, and power density of 82.4 µW cm-3 with 0.15 cm3 unit size in the water-induced electricity generation process. When harvesting moisture energy, the APCP creates dry-wet asymmetries and triggers the spontaneous development of electrical double layer with a current density of 1.25 mA cm-3 , sufficient to power small electronics. A device consisting of four APCP can generate stable electricity of 3.35 V and produce clean water with an evaporation rate of 2.06 kg m-2  h-1 simultaneously. This work provides insights into the fabrication of multifunctional fabrics for multisource energy harvesting and simultaneous solar steam generation.

Evolution of Morphology and Distribution of Salt Crystals on a Photothermal Layer during Solar Interfacial Evaporation

Solar interfacial evaporation (SIE) by leveraging photothermal conversion could be a clean and sustainable solution to the scarcity of fresh water, decontamination of wastewater, and steam sterilization. However, the process of salt crystallization on photothermal materials used in SIE, especially from saltwater evaporation, has not been completely understood. We report the temporal and spatial evolution of salt crystals on the photothermal layer during SIE. By using a typical oil lamp evaporator, we found that salt crystallization always initiates from the edge of the evaporation surface of the photothermal layer due to the local fast flux of the vapor to the surroundings. Interestingly, the salt crystals exhibit either compact or loose morphology, depending on the location and evaporation duration. By employing a suite of complementary analytical techniques of Raman and infrared spectroscopy and temperature mapping, we followed the evolution and spatial distribution of salt crystals, interfacial water, and surface temperature during evaporation. Our results suggested that the compact crystal structure may emerge from the recrystallization of salt in an initially porous structure, driven by continuous water evaporation from the porous and loose crystals. The holistic view provided in this study may lay the foundation for effective strategies for mitigation of the negative impact of salt crystallization in solar evaporation.

Lamellar Wood Sponge with Vertically Aligned Channels for Highly Efficient and Salt-Resistant Solar Desalination

Solar-assisted interfacial evaporation is a promising approach for purifying and desalinating water. As a sustainable biomass material, wood has attracted increasing interest as an innovative substrate for solar desalination, owing to its intrinsic porous structure, high hydrophilicity, and low thermal conductivity. However, developing wood-based solar evaporators with high evaporation rates and excellent salt resistance still remains a significant challenge, owing to the absence of large pores with high interconnectivity in natural wood. Herein, by converting the honeycombed structure of natural wood into a lamellar architecture via structural engineering, we develop a flexible wood sponge with vertically aligned channels for efficient and salt-resistant solar desalination after surface coating with carbon nanotubes (CNTs). The special lamellar structure with an interlayer distance of 50-300 μm provides the wood sponge with faster water transport, lower thermal conductivity, and water evaporation enthalpy, thus achieving higher evaporation performances in comparison with the cellular structure of natural wood. Noteworthy, the vertically aligned channels of the wood sponge facilitate sufficient fluid convection and diffusion and enable efficient salt exchanges between the heating interface and the underlying bulk water, thus preventing salt accumulation on the surface. Benefiting from the distinctive lamellar structure, the developed wood-sponge evaporator exhibits exceptional salt resistance even in a hypersaline brine (20 wt %) during continuous 7-day desalination under 1 sun irradiation, with a high evaporation rate (1.38-1.43 kg m-2 h-1), outperforming most previously reported wood-based evaporators. The lamellar wood sponge may provide a promising strategy for desalinating high-salinity brines in an efficient manner.

Scalable, Green, and Cost-Effective Carbonized Sand for Efficient Solar Desalination

Nowadays, sweet and drinkable water shortage is a global issue which has attracted widespread attention. Desalination of seawater as the greatest source of water on our planet using solar energy as the most abundant and green energy source for producing fresh water can help us address this issue. Interfacial solar desalination is a state-of-the-art, sustainable, green, and energy-efficient method that has been studied lately. One of the key parameters for researching this method with reasonable efficiency is a photothermal material. Herein, carbon-coated sand was synthesized using abundant, green, and low-cost materials (sand and sugar), and its performance as a photothermal material is investigated and reported. In this work, a three-dimensional (3D) system is introduced to develop the performance and efficiency of the system under real sun irradiation and natural circumstances. The salt rejection ability of the system is another important thing we should notice due to the high salinity of seawater that we want to desalinate. The superhydrophilic carbonized sand demonstrated a good evaporation rate of 1.53 kg/m²h and 82% efficiency under 1 sun irradiation and upright salt rejection ability, which exhibited its capability to be used in green solar-driven water vaporization technology for sweet water production. The effects of important parameters, including light intensity, wind speed, and environment temperature, on the evaporation rate using carbonized sand as a solar collector in a solar desalination system were studied in both laboratory and real systems.

Ion-Transfer Engineering via Janus Hydrogels Enables Ultrahigh Performance and Salt-Resistant Solar Desalination

Emerging solar interfacial evaporation offers the most promising response to the severe freshwater crisis. However, the most challenging bottleneck is the conflict between resisting salt accumulation and maintaining high evaporation performance since conventional salt-resistant evaporators enhance water flow to remove salt, leading to tremendous heat loss. Herein, an ion-transfer engineering is proposed via a Janus ion-selective hydrogel that enables ion-electromigration salt removal, breaking the historical dependence on water convection, and significantly lowering the heat loss. The hydrogels drive cations downward and anions upward, away from the evaporation surfaces. An electrical potential is thus established inside the evaporator and salt in 15 wt% brine is removed stably for seven days. A record-high evaporation rate of 6.86 kg m^-2  h^-1 in 15 wt% brine, 2.5 times the previously reported works, is achieved. With the from-scratch salt-resistant route, comprehensive water-thermal analysis, and record-high performance, this work holds great potential for the future salt-resistant evaporators.

Biological and Bioinspired Thermal Energy Regulation and Utilization

The regulation and utilization of thermal energy is increasingly important in modern society due to the growing demand for heating and cooling in applications ranging from buildings, to cooling high power electronics, and from personal thermal management to the pursuit of renewable thermal energy technologies. Over billions of years of natural selection, biological organisms have evolved unique mechanisms and delicate structures for efficient and intelligent regulation and utilization of thermal energy. These structures also provide inspiration for developing advanced thermal engineering materials and systems with extraordinary performance. In this review, we summarize research progress in biological and bioinspired thermal energy materials and technologies, including thermal regulation through insulation, radiative cooling, evaporative cooling and camouflage, and conversion and utilization of thermal energy from solar thermal radiation and biological bodies for vapor/electricity generation, temperature/infrared sensing, and communication. Emphasis is placed on introducing bioinspired principles, identifying key bioinspired structures, revealing structure-property-function relationships, and discussing promising and implementable bioinspired strategies. We also present perspectives on current challenges and outlook for future research directions. We anticipate that this review will stimulate further in-depth research in biological and bioinspired thermal energy materials and technologies, and help accelerate the growth of this emerging field.

Highly Salt-Resistant interfacial solar evaporators based on Melamine@Silicone nanoparticles for stable Long-Term desalination and water harvesting

Interfacial solar-driven evaporation (ISE) is one of the most promising solutions for collecting fresh water, however, poor salt-resistance severely limits the long-term stability of solar evaporators. Here, highly salt-resistant solar evaporators for stable long-term desalination and water harvesting were fabricated by depositing silicone nanoparticles onto melamine sponge, and then modifying the hybrid sponge sequentially with polypyrrole and Au nanoparticles. The solar evaporators have a superhydrophilic hull for water transport and solar desalination, and a superhydrophobic nucleus for reducing heat loss. Spontaneous rapid salt exchange and reduction in salt concentration gradient were achieved due to ultrafast water transport and replenishment in the superhydrophilic hull with a hierachical micro-/nanostructure, which effectively prevents salt deposition during ISE. Consequently, the solar evaporators have long-term stable evaporation performance of 1.65 kg m^-2h^-1 for 3.5 wt% NaCl solution under 1 sun illumination. Moreover, 12.87 kg m^-2 fresh water was collected during consecutive 10 h ISE of 20 wt% brine under 1 sun without any salt precipitation. We believe that this strategy will shed a new light on the design of long-term stable solar evaporators for fresh water harvesting.

Efficient Fabrication of Micro/Nanostructured Polyethylene/Carbon Nanotubes Foam with Robust Superhydrophobicity, Excellent Photothermality, and Sufficient Adaptability for All-Weather Freshwater Harvesting

The integration of fog collection and solar-driven evaporation has great significance in addressing the challenge of the global freshwater crisis. Herein, a micro/nanostructured polyethylene/carbon nanotubes foam with interconnected open-cell structure (MN-PCG) is fabricated using an industrialized micro extrusion compression molding technology. The 3D surface micro/nanostructure provides sufficient nucleation points for tiny water droplets to harvest moisture from humid air and a fog harvesting efficiency of 1451 mg cm^-2 h^-1 is achieved at night. The homogeneously dispersed carbon nanotubes and the graphite oxide@carbon nanotubes coating endow the MN-PCG foam with excellent photothermal properties. Benefitting from the excellent photothermal property and sufficient steam escape channels, the MN-PCG foam attains a superior evaporation rate of 2.42 kg m^-2 h^-1 under 1 Sun illumination. Consequently, a daily yield of ≈35 kg m^-2 is realized by the integration of fog collection and solar-driven evaporation. Moreover, the robust superhydrophobicity, acid/alkali tolerance, thermal resistance, and passive/active de-icing properties provide a guarantee for the long-term work of the MN-PCG foam during practical outdoor applications. The large-scale fabrication method for an all-weather freshwater harvester offers an excellent solution to address the global water scarcity.

Three-dimensional open architecture enabling salt-rejection solar evaporators with boosted water production efficiency

Direct solar desalination exhibits considerable potential for alleviating the global freshwater crisis. However, the prevention of salt accumulation while maintaining high water production remains an important challenge that limits its practical applications because the methods currently employed for achieving rapid salt backflow usually result in considerable heat loss. Herein, we fabricate a solar evaporator featuring vertically aligned mass transfer bridges for water transport and salt backflow. The 3D open architecture constructed using mass transfer bridges enables the evaporator to efficiently utilize the conductive heat that would otherwise be lost, significantly improving the water evaporation efficiency without compromising on salt rejection. The fabricated evaporator can treat salt water with more than 10% salinity. Moreover, it can continuously and steadily work in a real environment under natural sunlight with a practical solar-to-water collection efficiency of >40%. Using the discharged water from reverse osmosis plants and sea water from the Red Sea, the evaporator demonstrates a daily freshwater generation rate of ~5 L/m², which is sufficient to satisfy individual drinking water requirements. With strong salt rejection, high energy efficiency, and simple scalability, the 3D evaporator has considerable promise for freshwater supply for water-stressed and off-grid communities.

Conventional salt-rejection evaporators typically exhibit low evaporation rate due to large heat loss. Here, authors demonstrate a solar evaporator featuring vertically aligned mass transfer bridges that takes advantage of the conductive heat to enable optimized water transport and salt backflow.

Recent Development of Carbon-Nanotube-Based Solar Heat Absorption Devices and Their Application

Population growth and the current global weather patterns have heightened the need to optimize solar energy harvesting. Solar-powered water filtration, electricity generation, and water heating have gradually multiplied as viable sources of fresh water and power generation, especially for isolated places without access to water and energy. The unique thermal and optical characteristics of carbon nanotubes (CNTs) enable their use as efficient solar absorbers with enhanced overall photothermal conversion efficiency under varying solar light intensities. Due to their exceptional optical absorption efficiency, low cost, environmental friendliness, and natural carbon availability, CNTs have attracted intense scientific interest in the production of solar thermal systems. In this review study, we evaluated CNT-based water purification, thermoelectric generation, and water heating systems under varying solar levels of illumination, ranging from domestic applications to industrial usage. The use of CNT composites or multilayered structures is also reviewed in relation to solar heat absorber applications. An aerogel containing CNTs was able to ameliorate water filtering performance at low solar intensities. CNTs with a Fresnel lens improved thermoelectric output power at high solar intensity. Solar water heating devices utilizing a nanofluid composed of CNTs proved to be the most effective. In this review, we also aimed to identify the most relevant challenges and promising opportunities in relation to CNT-based solar thermal devices.

Double-Sided Suspending Evaporator with Top Water Supply for Concurrent Solar Evaporation and Salt Harvesting

Solar evaporation of seawater is promising to mitigate the fresh water scarcity problem in a green and sustainable way. However, salt accumulation on the photothermal material prevents the system continuous operation, and the water supply driven by capillary force severely limits the scale-up of the evaporators. Here, we demonstrate a double-sided suspending evaporator with top water supply and a surface water distributor for high-efficient concurrent solar evaporation and salt harvesting for large area applications. Both sides of the evaporator can evaporate water with automatic salt harvesting from the edge concurrently. Top water supply gets away from the limitation of capillary force for a larger area application and completely cuts off the heat leak to the bulk water below for higher efficiency. The energy conversion efficiency reaches 95.7% at 1.40 kg·m^-2·h^-1 with deionized water under 1 sun with a remarkable low surface average temperature (28.2 °C). Based on the simulation and experiment, a novel radial arterial water distribution system is developed to efficiently distribute water on a larger evaporation surface. The water distribution system alters the water transport path in the evaporation surface, leading to salt accumulation on the surface body, where salt is unable to be harvested by gravity automatically. This problem is further resolved by cutting out the salt accumulation area (16.4%) on the surface to create a floriform evaporator, which forcedly exposes the salt at the edge for harvesting. Up to70 h continuous solar evaporation from salt water at a rate of 1.04 kg·m^-2·h^-1 with concurrent salt collection on this floriform evaporator is achieved. This work resolves water supply and salt accumulation problems in scaling up the solar evaporators and advances the structural design of evaporators for high-efficient large area applications.

A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies

This letter solves a major hurdle that mars photolithography-based fabrication of micro-mesoscale structures in silicon. Conventional photolithography is usually performed on smooth, flat wafer surfaces to lay a 2D design and subsequently etch it to create single-level features. It is, however, unable to process non-flat surfaces or already etched wafers and create more than one level in the structure. In this study, we have described a novel cleanroom-based process flow that allows for easy creation of such multi-level, hierarchical 3D structures in a substrate. This is achieved by introducing an ultra-thin sacrificial silicon dioxide hardmask layer on the substrate which is first 3D patterned via multiple rounds of lithography. This 3D pattern is then scaled vertically by a factor of 200–300 and transferred to the substrate underneath via a single shot deep etching step. The proposed method is also easily characterizable—using features of different topographies and dimensions, the etch rates and selectivities were quantified; this characterization information was later used while fabricating specific target structures. Furthermore, this study comprehensively compares the novel pattern transfer technique to already existing methods of creating multi-level structures, like grayscale lithography and chip stacking. The proposed process was found to be cheaper, faster, and easier to standardize compared to other methods—this made the overall process more reliable and repeatable. We hope it will encourage more research into hybrid structures that hold the key to dramatic performance improvements in several micro-mesoscale devices.

Enhanced Contactless Salt-Collecting Solar Desalination

Solar desalination is expected to solve the problem of global water shortage. Yet its stability is plagued by salt accumulation. Here, a paper-based thermal radiation-enabled evaporation system (TREES) is demonstrated to achieve sustainable and highly efficient salt-collecting desalination, featuring a dynamic evaporation front based on the accumulated salt layer where water serves as its own absorber via energy down-conversion. When processing 7 wt % brine, it continuously evaporates water at a high rate─2.25 L m-2 h-1 under 1 sun illumination─which is well beyond the input solar energy limit for over 366 h. It is revealed that such enhanced evaporation arises from the unique vertical evaporation wall of the paper-TREES, which captures the thermal energy from the heated bottom efficiently and gains extra energy from the warmer environment. These findings provide novel insights into the design of next-generation salt-harvesting solar evaporators and take a step further to advance their applications in green desalination.

High-Performance Photoelectrochemical Desalination Based on the Dye-Sensitized Bi2O3 Anode

In this work, a solar-driven redox flow desalination system is reported, which combines a solar cell based on a Bi2O3 photoanode and a redox flow desalination cell through an integrated electrode. The Bi2O3 film was prepared through a simple one-step water bath deposition method and served as a photoanode after the coating of the N719 dye. The activated carbon (AC)-coated graphite paper served as both the integrated electrode and counter electrode. The I3-/I- redox electrolyte circulates in the solar cell channel between the photoanode and intergrated electrode, while the [Fe(CN)6]4-/[Fe(CN)6]3- electrolyte circulates in the redox flow desalination part between the integrated electrode and counter electrode. This dye-sensitized solar-driven desalination cell is capable of achieving a maximum salt removal rate of 62.89 μg/(cm2·min) without consuming any electrical power. The combination of the solar cell and redox flow desalination is highly efficient with double functions of desalination and energy release using light as a driving force. This current research work is significant for the development of efficient and stable photoanode materials in photoelectrochemical desalination.

Rational Design of Photothermal and Anti-Bacterial Foam With Macroporous Structure for Efficient Desalination of Water

With the environmental deterioration and the rise in demand for sustainability, the lack of freshwater resources has emerged as a global concern. To address this issue, the desalination of water using solar evaporation is centered on as a promising approach. In this study, we designed a light and photothermal liquefied-chitin-based polyurethane foam to achieve efficient water evaporation benefiting from their powerful solar spectral absorption, low thermal conductivity, quick transportation of water, hierarchically porous structures, and anti-biofouling natures. Moreover, because of the introduction of nano-silver, the newly developed foam exhibits considerable antibacterial ability and improved photothermal performance. Notably, the low thermal conductivity of the foam can reduce the loss of absorbed solar heat, whereas its large porous structure provides a smooth water transport channel. More importantly, with the assistance of heat, polyacrylamide hydrogels adhering along with the pores rapidly absorb and desorb water molecules, promoting the evaporation of water and improving solar energy conversion efficiency. Ultimately, under irradiation by one sunlight, the proposed material demonstrated a water evaporation rate and solar photothermal conversion efficiency of 2.44 kg m-2 h-1 and 153.2%, respectively.

Gradient Titanium Oxide Nanowire Film: a Multifunctional Solar Energy Utilization Platform for High-Salinity Organic Sewage Treatment

The treatment of high salt organic sewage is considered to be a high energy consumption process, and it is difficult to degrade organic matter and separate salt and water simultaneously. In this study, a gradient structure titanium oxide nanowire film is developed, which can realize the thorough treatment of sewage under sunlight. Among the film, part TiO_2-x has enhanced photocatalytic properties and can completely degrade 0.02 g·L^-1 methylene blue in 90 min under 2 sun. Part Ti_nO_2n-1 has excellent photothermal conversion efficiency and can achieve 1.833 kg·m^-2·h^-1 water evaporation rate at 1 sun. Through the special structure design, salt positioning crystallization can be realized to ensure the film's stable operation for a long time. The gradient hydrophilicity of the film ensures adequate and rapid water transfer, while the water flow can induce a significant hydrovoltaic effect. The measured V_OC is positively correlated with light intensity and photothermal area and corresponds to the water evaporation rate.

An Asymmetric Hygroscopic Structure for Moisture-Driven Hygro-Ionic Electricity Generation and Storage

The interactions between moisture and materials give rise to the possibility of moisture-driven energy generation (MEG). Current MEG materials and devices only establish this interaction during water sorption in specific configurations, and conversion is eventually ceased by saturated water uptake. This paper reports an asymmetric hygroscopic structure (AHS) that simultaneously achieves energy harvesting and storage from moisture absorption. The AHS is constructed by the asymmetric deposition of a hygroscopic ionic hydrogel over a layer of functionalized carbon. Water absorbed from the air creates wet-dry asymmetry across the AHS and hence an in-plane electric field. The asymmetry can be perpetually maintained even after saturated water absorption. The absorbed water triggers the spontaneous development of an electrical double layer (EDL) over the carbon surface, which is termed a hygro-ionic process, accounting for the capacitive properties of the AHS. A peak power density of 70 µW cm^-3  was realized after geometry optimization. The AHS shows the ability to be recharged either by itself owing to a self-regeneration effect or via external electrical means, which allows it to serve as an energy storage device. In addition to insights into moisture-material interaction, AHSs further shows potential for electronics powering in assembled devices.

Narrow-Bandgap LaMO3 (M = Ni, Co) nanomaterials for efficient interfacial solar steam generation

Photothermal water evaporation provides a pathway towards a promising solution to global freshwater scarcity. Synergistic integration of functions in a material in diverse directions is a key strategy for designing multifunctional materials. Lanthanum-based perovskite complex oxides LaMO₃ (M = Ni and Co) have narrow band gaps with a high absorption coefficient. These functionalities have not been appropriately explored for photothermal energy conversion. Here, we synthesized nanostructured metallic LaNiO₃ and semiconducting LaCoO₃ and used them to design interfacial solar steam generators. Effective light absorption capability over the entire solar spectrum of these materials leads to a photothermal efficiency of the order of 83% for both materials. Using a cone-shaped 3D interfacial steam generator with a LaNiO₃ absorber, we achieved an evaporation rate of 2.3 kg m^-2 h^-1, corresponding to solar vapor generation efficiency of over 95%. To the best of our knowledge, this evaporation rate is higher than any oxide-based interfacial solar steam generator reported so far. Furthermore, we have also shown an effective way of using such evaporators for long-term seawater desalination.

Chemical treatment of biomasswastes as carbon dot carriers for solar-driven water purification

A purely chemical method is demonstrated to treat a variety of biomass wastes for extracting cellulose nanofibrils (CNFs) with a consistent property. By hydrothermal reaction, carbon dots (CDs) can be easily grafted on the surface of CNFs to act as photo-thermal agents and enable fast water evaporation rate at 2.5 kg m^-2h^-1 with about 96.45% solar-to-vapor efficiency under one sun irradiation. This derives from good hydration ability of this system, which lowers the evaporation enthalpy. Moreover, this system not only adsorbs dye contaminants effectively by the formation of hydrogen bonds, but also possesses long-term antifouling solar desalination by means of rationally drilled millimeter-sized channels. Given the sustainable biomass resources and scalable fabrication process, this work offers a promising strategy towards construct low-cost evaporators with the excellent water purification performance.