The Evolution of Flexible Electronics: From Nature, Beyond Nature, and To Nature

Percolative phase transition in few-layered MoSe2 field-effect transistors using Co and Cr contacts

The metal-to-insulator phase transition (MIT) in two-dimensional (2D) materials under the influence of a gating electric field has revealed interesting electronic behavior and the need for a deeper fundamental understanding of electron transport processes, while attracting much interest in the development of next-generation electronic and optoelectronic devices. Although the mechanism of the MIT in 2D semiconductors is a topic under debate in condensed matter physics, our work demonstrates the tunable percolative phase transition in few-layered MoSe2 field-effect transistors (FETs) using different metallic contact materials. Here, we attempted to understand the MIT through temperature-dependent electronic transport measurements by tuning the carrier density in a MoSe2 channel under the influence of an applied gate voltage. In particular, we have examined this phenomenon using the conventional chromium (Cr) and ferromagnetic cobalt (Co) as two metal contacts. For both Cr and Co, our devices demonstrated n-type behavior with a room-temperature field-effect mobility of 16 cm2 V-1 s-1 for the device with Cr-contacts and 92 cm2 V-1 s-1 for the device with Co-contacts, respectively. With low temperature measurements at 50 K, the mobilities increased significantly to 65 cm2 V-1 s-1 for the device with Cr and 394 cm2 V-1 s-1 for the device with Co-contacts. By fitting our experimental data to the percolative phase transition theory, the temperature-dependent conductivity data show a transition from an insulating-to-metallic behavior at a bias of ∼28 V for Cr-contacts and ∼20 V for Co-contacts. This cross-over of the conductivity can be attributed to an increase in carrier density as a function of the gate bias in temperature-dependent transfer characteristics. By extracting the critical exponents, we find that the transport behavior in the device with Co-contacts aligns closely with the 2D percolation theory. In contrast, the devices with Cr-contacts deviate significantly from the 2D limit at low temperatures.

From Printed Devices to Vertically Stacked, 3D Flexible Hybrid Systems

The pursuit of miniaturized Si electronics has revolutionized computing and communication. During recent years, the value addition in electronics has also been achieved through printing, flexible and stretchable electronics form factors, and integration over areas larger than wafer size. Unlike Si semiconductor manufacturing which takes months from tape-out to wafer production, printed electronics offers greater flexibility and fast-prototyping capabilities with lesser resources and waste generation. While significant advances have been made with various types of printed sensors and other passive devices, printed circuits still lag behind Si-based electronics in terms of performance, integration density, and functionality. In this regard, recent advances using high-resolution printing coupled with the use of high mobility materials and device engineering, for both in-plane and out-of-plane integration, raise hopes. This paper focuses on the progress in printed electronics, highlighting emerging printing technologies and related aspects such as resource efficiency, environmental impact, integration scale, and the novel functionalities enabled by vertical integration of printed electronics. By highlighting these advances, this paper intends to reveal the future promise of printed electronics as a sustainable and resource-efficient route for realizing high-performance integrated circuits and systems.

Advances in Symbiotic Bioabsorbable Devices

Symbiotic bioabsorbable devices are ideal for temporary treatment. This eliminates the boundaries between the device and organism and develops a symbiotic relationship by degrading nutrients that directly enter the cells, tissues, and body to avoid the hazards of device retention. Symbiotic bioresorbable electronics show great promise for sensing, diagnostics, therapy, and rehabilitation, as underpinned by innovations in materials, devices, and systems. This review focuses on recent advances in bioabsorbable devices. Innovation is focused on the material, device, and system levels. Significant advances in biomedical applications are reviewed, including integrated diagnostics, tissue repair, cardiac pacing, and neurostimulation. In addition to the material, device, and system issues, the challenges and trends in symbiotic bioresorbable electronics are discussed.

Ultrathin, Lightweight Materials Enabled Wireless Data and Power Transmission in Chip-Less Flexible Electronics

The surge of flexible, biointegrated electronics has inspired continued research efforts in designing and developing chip-less and wireless devices as soft and mechanically compliant interfaces to the living systems. In recent years, innovations in materials, devices, and systems have been reported to address challenges surrounding this topic to empower their reliable operation for monitoring physiological signals. This perspective provides a brief overview of recent works reporting various chip-less electronics for sensing and actuation in diverse application scenarios. We summarize wireless signal/data/power transmission strategies, key considerations in materials design and selection, as well as successful demonstrations of sensors and actuators in wearable and implantable forms. The final section provides an outlook to the future direction down the road for performance improvement and optimization. These versatile, inexpensive, and low-power device concepts can serve as alternative strategies to existing digital wireless electronics, which will find broad applications as bidirectional biointerfaces in basic biomedical research and clinical practices.

New Carbon Materials for Multifunctional Soft Electronics

Soft electronics are garnering significant attention due to their wide-ranging applications in artificial skin, health monitoring, human-machine interaction, artificial intelligence, and the Internet of Things. Various soft physical sensors such as mechanical sensors, temperature sensors, and humidity sensors are the fundamental building blocks for soft electronics. While the fast growth and widespread utilization of electronic devices have elevated life quality, the consequential electromagnetic interference (EMI) and radiation pose potential threats to device precision and human health. Another substantial concern pertains to overheating issues that occur during prolonged operation. Therefore, the design of multifunctional soft electronics exhibiting excellent capabilities in sensing, EMI shielding, and thermal management is of paramount importance. Because of the prominent advantages in chemical stability, electrical and thermal conductivity, and easy functionalization, new carbon materials including carbon nanotubes, graphene and its derivatives, graphdiyne, and sustainable natural-biomass-derived carbon are particularly promising candidates for multifunctional soft electronics. This review summarizes the latest advancements in multifunctional soft electronics based on new carbon materials across a range of performance aspects, mainly focusing on the structure or composite design, and fabrication method on the physical signals monitoring, EMI shielding, and thermal management. Furthermore, the device integration strategies and corresponding intriguing applications are highlighted. Finally, this review presents prospects aimed at overcoming current barriers and advancing the development of state-of-the-art multifunctional soft electronics.

Ultraflexible Sensor Development via 4D Printing: Enhanced Sensitivity to Strain, Temperature, and Magnetic Fields

This paper addresses the trade-off between sensitivity and sensing range in strain sensors, while introducing additional functionalities through an innovative 4D printing approach. The resulting ultraflexible sensor integrates carbon nanotubes/liquid metal hybrids and iron powders within an Ecoflex matrix. The optimization of this composition enables the creation of an uncured resin ideal for Direct Ink Writing (DIW) and a cured sensor with exceptional electromechanical, thermal, and magnetic performance. Notably, the sensor achieves a wide linear strain range of 350% and maintains a stable Gauge Factor of 19.8, offering an ultralow detection limit of 0.1% strain and a rapid 83-ms response time. Beyond superior strain sensing capabilities, the sensor exhibits outstanding thermal endurance for temperatures exceeding 300 °C, enhanced thermal conductivity, and a consistent resistance-temperature relationship, making it well-suited for high-temperature applications. Moreover, the inclusion of iron particles provides magnetic responsiveness, enabling synergistic applications in location and speed detection, particularly in home care. Leveraging DIW facilitates the creation of complex-shaped sensors with multiple functional materials, significantly broadening the sensor's capabilities. This convergence of additive manufacturing and multifunctional materials marks a transformative step in advancing the performance of next-generation sensors across diverse domains.

Strain-Mediated Second Harmonic Generation Enhancement of Bimetallic Metal-Organic Frameworks

Triggered by the demand of developing practical metal-organic framework (MOF) based nonlinear optical (NLO) devices, there is a surge of research interest in the regulation of NLO properties of MOFs. Strain engineering provides a new opportunity to regulate the optoelectronic properties of materials and device performance at the interface. Here we introduce the induction of the strain field in structures by constructing bimetallic Zn/Cu-MOFs. The NLO response of MOF1-9 with different metal element ratios was characterized in the near-infrared window. Surprisingly, MOF3 exhibited a giant second harmonic generation (SHG) enhancement compared with that of pristine Zn- and Cu-MOF. The determined second-order nonlinear susceptibility of MOF3 (∼19.86 p mV-1) is one order of magnitude larger than that of pristine Zn-MOF (1.65 p mV-1) and Cu-MOF (3.88 p mV-1) and much higher than the commonly used NLO crystals. Moreover, the anisotropy ratios of MOF1-9 can be harnessed in a wide range (∼4.7-118.8). The anisotropy ratio of MOF4 (∼118.8) is much higher than that of the most excellent 2D material to date, to our best knowledge. A first-order perturbation of second-order polarization based on point group description was introduced to explore the regulation mechanism of the NLO response under the strain field of MOFs.

Ultrathin Transistors and Circuits for Conformable Electronics

Adapting electronics to perfectly conform to nonplanar and rough surfaces, such as human skin, is a challenging task, which could open up new applications in fields of high economic and scientific interest, ranging from health to robotics, human-machine interface, and Internet of Things. The key to success lies in defining a technology that can lead to ultrathin devices, exploiting ultimately thin materials, with high mechanical flexibility and excellent electrical properties. Here, we report a hybrid approach for the development of high-performance, ultrathin and conformable electronic devices, based on the integration of semiconducting transition metal dichalcogenides, i.e., MoS2, with organic gate dielectric material, i.e., polyvinyl formal (PVF) combined with inkjet printed PEDOT:PSS electrodes. Through this novel approach, transistors and simple digital and analogue circuits are fabricated by a sequential stacking of ultrathin (nanometer) layers on a few micrometers thick polyimide substrate, which guarantees the high flexibility mandatory for the targeted applications.

In situ studies revealing the effects of Au surfactant on the formation of ultra-thin Ag layers using high-power impulse magnetron sputter deposition

Introducing metallic nanoparticles, such as Au, on a substrate as a surfactant or wetting inducer has been demonstrated as a simple but effective way to facilitate the formation of ultra-thin silver layers (UTSLs) during the subsequent Ag deposition. However, most studies have paid much attention to the applications of UTSLs assisted by metallic surfactants but neglected the underlying mechanisms of how the metallic surfactant affects the formation of UTSL. Herein, we have applied in situ grazing-incidence wide-/small-angle X-ray scattering to reveal the effects of the Au surfactant or seed layer (pre-deposited Au nanoparticles) on the formation of UTSL by high-power impulse magnetron sputter deposition (HiPIMS) on a zinc oxide (ZnO) thin film. The comprehensive and in-depth analysis of the in situ X-ray scattering data revealed that the pre-deposited Au nanoparticles can act as additional defects or growth cores for the sputtered Ag atoms despite using HiPIMS, which itself forms many nucleation sites. As a result, the formation of a continuous and smooth UTSL is reached earlier in HiPIMS compared with bare ZnO thin films. Based on the mechanism revealed by the in situ measurements, we provide insight into the formation of UTSL and further UTSL-based applications.

Flexible and wearable electronic systems based on 2D hydrogel composites

Flexible electronics is a rapidly developing field of study, which integrates many other fields, including materials science, biology, chemistry, physics, and electrical engineering. Despite their vast potential, the widespread utilization of flexible electronics is hindered by several constraints, including elevated Young's modulus, inadequate biocompatibility, and diminished responsiveness. Therefore, it is necessary to develop innovative materials aimed at overcoming these hurdles and catalysing their practical implementation. In these materials, hydrogels are particularly promising owing to their three-dimensional crosslinked hydrated polymer networks and exceptional properties, positioning them as leading candidates for the development of future flexible electronics.

Advances in Flexible Magnetosensitive Materials and Devices for Wearable Electronics

Emerging fields, such as wearable electronics, digital healthcare, the Internet of Things, and humanoid robots, highlight the need for flexible devices capable of recording signals on curved surfaces and soft objects. In particular, flexible magnetosensitive devices garner significant attention owing to their ability to combine the advantages of flexible electronics and magnetoelectronic devices, such as reshaping capability, conformability, contactless sensing, and navigation capability. Several key challenges must be addressed to develop well-functional flexible magnetic devices. These include determining how to make magnetic materials flexible and even elastic, understanding how the physical properties of magnetic films change under external strain and stress, and designing and constructing flexible magnetosensitive devices. In recent years, significant progress is made in addressing these challenges. This study aims to provide a timely and comprehensive overview of the most recent developments in flexible magnetosensitive devices. This includes discussions on the fabrications and mechanical regulations of flexible magnetic materials, the principles and performances of flexible magnetic sensors, and their applications for wearable electronics. In addition, future development trends and challenges in this field are discussed.

Printed Self-Healing Stretchable Electronics for Bio-signal Monitoring and Intelligent Packaging

Integrating self-healing capabilities into printed stretchable electronic devices is important for improving performance and extending device life. However, achieving printed self-healing stretchable electronic devices with excellent device-level healing ability and stretchability while maintaining outstanding electrical performance remains challenging. Herein, a series of printed device-level self-healing stretchable electronic devices is achieved by depositing liquid metal/silver fractal dendrites/polystyrene-block-polyisoprene-block-polystyrene (LM/Ag FDs/SIS) conductive inks onto a self-healing thermoplastic polyurethane (TPU) film via screen printing method. Owing to the fluidic properties of the LM and the interfacial hydrogen bonding and disulfide bonds of TPU, the as-obtained stretchable electronic devices maintain good electronic properties under strain and exhibit device-level self-healing properties without external stimulation. Printed self-healing stretchable electrodes possess high electrical conductivity (1.6 × 105 S m-1), excellent electromechanical properties, and dynamic stability, with only a 2.5-fold increase in resistance at 200% strain, even after a complete cut and re-healing treatment. The printed self-healing capacitive stretchable strain sensor shows good linearity (R2 ≈0.9994) in a wide sensing range (0%-200%) and is successfully applied to bio-signal detection. Furthermore, the printed self-healing electronic smart label is designed and can be used for real-time environmental monitoring, which exhibits promising potential for practical application in food preservation packaging.

Revolutionary Point-of-Care Wearable Diagnostics for Early Disease Detection and Biomarker Discovery through Intelligent Technologies

Early-stage disease detection, particularly in Point-Of-Care (POC) wearable formats, assumes pivotal role in advancing healthcare services and precision-medicine. Public benefits of early detection extend beyond cost-effectively promoting healthcare outcomes, to also include reducing the risk of comorbid diseases. Technological advancements enabling POC biomarker recognition empower discovery of new markers for various health conditions. Integration of POC wearables for biomarker detection with intelligent frameworks represents ground-breaking innovations enabling automation of operations, conducting advanced large-scale data analysis, generating predictive models, and facilitating remote and guided clinical decision-making. These advancements substantially alleviate socioeconomic burdens, creating a paradigm shift in diagnostics, and revolutionizing medical assessments and technology development. This review explores critical topics and recent progress in development of 1) POC systems and wearable solutions for early disease detection and physiological monitoring, as well as 2) discussing current trends in adoption of smart technologies within clinical settings and in developing biological assays, and ultimately 3) exploring utilities of POC systems and smart platforms for biomarker discovery. Additionally, the review explores technology translation from research labs to broader applications. It also addresses associated risks, biases, and challenges of widespread Artificial Intelligence (AI) integration in diagnostics systems, while systematically outlining potential prospects, current challenges, and opportunities.

Recent advances in flexible memristors for advanced computing and sensing

Conventional computing systems based on von Neumann architecture face challenges such as high power consumption and limited data processing capability. Improving device performance via scaling guided by Moore's Law becomes increasingly difficult. Emerging memristors can provide a promising solution for achieving high-performance computing systems with low power consumption. In particular, the development of flexible memristors is an important topic for wearable electronics, which can lead to intelligent systems in daily life with high computing capacity and efficiency. Here, recent advances in flexible memristors are reviewed, from operating mechanisms and typical materials to representative applications. Potential directions and challenges for future study in this area are also discussed.

Natural polymer starch-based materials for flexible electronic sensor development: A review of recent progress

In response to the burgeoning interest in the development of highly conformable and resilient flexible electronic sensors capable of transducing diverse physical stimuli, this review investigates the pivotal role of natural polymers, specifically those derived from starch, in crafting sustainable and biocompatible sensing materials. Expounding on cutting-edge research, the exploration delves into innovative strategies employed to leverage the distinctive attributes of starch in conjunction with other polymers for the fabrication of advanced sensors. The comprehensive discussion encompasses a spectrum of starch-based materials, spanning all-starch-based gels to starch-based soft composites, meticulously scrutinizing their applications in constructing resistive, capacitive, piezoelectric, and triboelectric sensors. These intricately designed sensors exhibit proficiency in detecting an array of stimuli, including strain, temperature, humidity, liquids, and enzymes, thereby playing a pivotal role in the continuous and non-invasive monitoring of human body motions, physiological signals, and environmental conditions. The review highlights the intricate interplay between material properties, sensor design, and sensing performance, emphasizing the unique advantages conferred by starch-based materials, such as self-adhesiveness, self-healability, and re-processibility facilitated by dynamic bonding. In conclusion, the paper outlines current challenges and future research opportunities in this evolving field, offering valuable insights for prospective investigations.

Metal-organic framework based self-powered devices for human body energy harvesting

The shift from traditional bulky electronics to smart wearable devices represents a crucial trend in technological advancement. In recent years, the focus has intensified on harnessing thermal and mechanical energy from human activities to power small wearable electronics. This vision has attracted considerable attention from researchers, with an emphasis on the development of suitable materials that can efficiently convert human body energy into usable electrical form. Metal-organic frameworks (MOFs), with their unique tunable structures, large surface areas, and high porosity, emerge as a promising material category for human body energy harvesting due to their ability to be precisely engineered at the molecular level, which allows for the optimization of their properties to suit specific energy harvesting needs. This article explores the progressive development of MOF materials, highlighting their potential in the realm of self-power devices for wearable applications. It first introduces the typical energy harvesting routes that are particularly suitable for harvesting human body energy, including thermoelectric, triboelectric, and piezoelectric techniques. Then, it delves into various research advances that have demonstrated the efficacy of MOFs in capturing and converting body-generated energy into electrical energy, emphasizing on the conceptual design, device fabrication, and applications in medical health monitoring, human-computer interaction, and motion monitoring. Furthermore, it discusses potential future directions for research in MOF-based self-powered devices and outlines perspectives that could drive breakthroughs in the efficiency and practicality of these devices.

Biosustainable Multiscale Transparent Nanocomposite Films for Sensitive Pressure and Humidity Sensors

Light weight, thinness, transparency, flexibility, and insulation are the key indicators for flexible electronic device substrates. The common flexible substrates are usually polymer materials, but their recycling is an overwhelming challenge. Meanwhile, paper substrates are limited in practical applications because of their poor mechanical and thermal stability. However, natural biomaterials have excellent mechanical properties and versatility thanks to their organic-inorganic multiscale structures, which inspired us to design an organic-inorganic nanocomposite film. For this purpose, a bio-inspired multiscale film was developed using cellulose nanofibers with abundant hydrophilic functional groups to assist in dispersing hydroxyapatite nanowires. The thickness of the biosustainable film is only 40 μm, and it incorporates distinctive mechanical properties (strength: 52.8 MPa; toughness: 0.88 MJ m-3) and excellent optical properties (transmittance: 80.0%; haze: 71.2%). Consequently, this film is optimal as a substrate employed for flexible sensors, which can transmit capacitance and resistance signals through wireless Bluetooth, showing an ultrasensitive response to pressure and humidity (for example, responding to finger pressing with 5000% signal change and exhaled water vapor with 4000% signal change). Therefore, the comprehensive performance of the biomimetic multiscale organic-inorganic composite film confers a prominent prospect in flexible electronics devices, food packaging, and plastic substitution.

Actuation for flexible and stretchable microdevices

Flexible and stretchable microdevices incorporate highly deformable structures, facilitating precise functionality at the micro- and millimetre scale. Flexible microdevices have showcased extensive utility in the fields of biomedicine, microfluidics, and soft robotics. Actuation plays a critical role in transforming energy between different forms, ensuring the effective operation of devices. However, when it comes to actuating flexible microdevices at the small millimetre or even microscale, translating actuation mechanisms from conventional rigid large-scale devices is not straightforward. The recent development of actuation mechanisms leverages the benefits of device flexibility, particularly in transforming conventional actuation concepts into more efficient approaches for flexible devices. Despite many reviews on soft robotics, flexible electronics, and flexible microfluidics, a specific and systematic review of the actuation mechanisms for flexible and stretchable microdevices is still lacking. Therefore, the present review aims to address this gap by providing a comprehensive overview of state-of-the-art actuation mechanisms for flexible and stretchable microdevices. We elaborate on the different actuation mechanisms based on fluid pressure, electric, magnetic, mechanical, and chemical sources, thoroughly examining and comparing the structure designs, characteristics, performance, advantages, and drawbacks of these diverse actuation mechanisms. Furthermore, the review explores the pivotal role of materials and fabrication techniques in the development of flexible and stretchable microdevices. Finally, we summarise the applications of these devices in biomedicine and soft robotics and provide perspectives on current and future research.

Fully Transient 3D Origami Paper-Based Ammonia Gas Sensor Obtained by Facile MXene Spray Coating

Developing high-performance chemiresistive gas sensors with mechanical compliance for environmental or health-related biomarker monitoring has recently drawn increasing research attention. Among them, two-dimensional MXene materials hold great potential for room-temperature hazardous gas (e.g., NH3) monitoring regardless of the complicated fabrication process, insufficient 2D/3D flexibilities, and poor environmental sustainability. Herein, a Ti3C2Tx MXene/gelatin ink was developed for patterning electrodes through a facile spray coating. Particularly, the patterned Ti3C2Tx-based coating exhibited good adhesion on the paper substrate against repeated peeling-off and excellent mechanical flexibility against 1000 cyclic stretching. The porous morphology of the coating facilitated the NH3 sensing ability. As a result, the 2D kirigami-shaped NH3 sensor exhibited a good response of 7% to 50 ppm of NH3 with detectable concentrations ranging from 5-500 ppm, decent selectivity over interferences, etc., which could be well-maintained even at 50% stretched state. In addition, with the help of mechanically guided compressive buckling, 3D mesostructured MXene origamis could be obtained, holding promise for detecting the coming direction and height distribution of hazardous gas, e.g., the NH3. More importantly, the as-fabricated MXene/gelatin origami paper could be fully degraded in PBS/H2O2/cellulase solution within 19 days, demonstrating its potential as a high-performance, shape morphable, and environmentally friendly wearable gas sensor.

Three-Dimensional Printing of Hydrogels for Flexible Sensors: A Review

The remarkable flexibility and heightened sensitivity of flexible sensors have drawn significant attention, setting them apart from traditional sensor technology. Within this domain, hydrogels-3D crosslinked networks of hydrophilic polymers-emerge as a leading material for the new generation of flexible sensors, thanks to their unique material properties. These include structural versatility, which imparts traits like adhesiveness and self-healing capabilities. Traditional templating-based methods fall short of tailor-made applications in crafting flexible sensors. In contrast, 3D printing technology stands out with its superior fabrication precision, cost-effectiveness, and satisfactory production efficiency, making it a more suitable approach than templating-based strategies. This review spotlights the latest hydrogel-based flexible sensors developed through 3D printing. It begins by categorizing hydrogels and outlining various 3D-printing techniques. It then focuses on a range of flexible sensors-including those for strain, pressure, pH, temperature, and biosensors-detailing their fabrication methods and applications. Furthermore, it explores the sensing mechanisms and concludes with an analysis of existing challenges and prospects for future research breakthroughs in this field.

A double-crack structure for bionic wearable strain sensors with ultra-high sensitivity and a wide sensing range

Flexible strain sensors are crucial in fully monitoring human motion, and they should have a wide sensing range and ultra-high sensitivity. Herein, inspired by lyriform organs, a flexible strain sensor based on the double-crack structure is designed. An MXene layer and an Au layer with cracks are constructed on both sides of the insulated polydimethylsiloxane (PDMS) film, forming an equivalent parallel circuit that guarantees the integrity of the conductive path under a large strain. The rapid disconnection of the crack junctions causes a significant change in the resistance value. Due to the effect of cracks on the conductive path, the sensitivity of the sensor is largely improved. Benefiting from the double-crack structure, the as-obtained sensor shows ultra-high sensitivity (maximum gauge factor of up to 14 373.6), a wide working range (up to 21%), a fast response time (183 ms) and excellent dynamical stability (almost no performance loss after 1000 stretching cycles and different frequency cycles). In practical applications, the sensor is applied to different parts of the human body to sense the deformation of the skin, demonstrating its great potential application value in human physiological detection and the human-machine interaction. This study can provide new ideas for preparing high-performance flexible strain sensors.

A Roadmap from Functional Materials to Plant Health Monitoring (PHM)

Soft bioelectronics have great potential for the early diagnosis of plant diseases and the mitigation of adverse outcomes such as reduced crop yields and stunted growth. Over the past decade, bioelectronic interfaces have evolved into miniaturized conformal electronic devices that integrate flexible monitoring systems with advanced electronic functionality. This development is largely attributable to advances in materials science, and micro/nanofabrication technology. The approach uses the mechanical and electronic properties of functional materials (polymer substrates and sensing elements) to create interfaces for plant monitoring. In addition to ensuring biocompatibility, several other factors need to be considered when developing these interfaces. These include the choice of materials, fabrication techniques, precision, electrical performance, and mechanical stability. In this review, some of the benefits plants can derive from several of the materials used to develop soft bioelectronic interfaces are discussed. The article describes how they can be used to create biocompatible monitoring devices that can enhance plant growth and health. Evaluation of these devices also takes into account features that ensure their long-term durability, sensitivity, and reliability. This article concludes with a discussion of the development of reliable soft bioelectronic systems for plants, which has the potential to advance the field of bioelectronics.

Rapid Self-Healing Hydrogel with Ultralow Electrical Hysteresis for Wearable Sensing

Self-healing hydrogels are in high demand for wearable sensing applications due to their remarkable deformability, high ionic and electrical conductivity, self-adhesiveness to human skin, as well as resilience to both mechanical and electrical damage. However, these hydrogels face challenges such as delayed healing times and unavoidable electrical hysteresis, which limit their practical effectiveness. Here, we introduce a self-healing hydrogel that exhibits exceptionally rapid healing with a recovery time of less than 0.12 s and an ultralow electrical hysteresis of less than 0.64% under cyclic strains of up to 500%. This hydrogel strikes an ideal balance, without notable trade-offs, between properties such as softness, deformability, ionic and electrical conductivity, self-adhesiveness, response and recovery times, durability, overshoot behavior, and resistance to nonaxial deformations such as twisting, bending, and pressing. Owing to this unique combination of features, the hydrogel is highly suitable for long-term, durable use in wearable sensing applications, including monitoring body movements and electrophysiological activities on the skin.

A "Mesh Scaffold" that regulates the mechanical properties and restricts the phase transition-induced volume change of the PNIPAM-based hydrogel for wearable sensors

Poly(N-isopropylacrylamide) (PNIPAM) is capable of improving the reversibility and responsiveness of flexible electronics. However, its phase transition-induced volume variation and poor adhesiveness remain limitations for expending its applications. Herein, a pressure-sensitive adhesive (PSA), which is a type of mesh scaffold, is constructed inside the network of PNIPAM, providing the hydrogel with a constant volume in response to different temperatures, in situ tunable mechanical properties, and superior adhesiveness. The reversible density of the mesh scaffold adjusts the aggregation state of the hydrogel chains, whereupon it is capable of changing its mechanical modulus from 6.7 kPa to 45.3 kPa. This mechanical mechanism contributes to hydrogel-based flexible devices for multiple applications, especially in pressure-related sensors. The mesh scaffold restricts the phase-transition-induced volume variation, which allows the hydrogel sensor to stably monitor the external pressure at various temperatures. The high adhesion enables the effective interfacial interaction with the skin, avoiding the loss of sensing signals during the detection of human body movements. When it is assembled into an electronic device, it can transmit information and recognize sign language via Morse code. Thus, herein, we report a hydrogel sensor that is promising for pressure detection in temperature-unstable environments, especially for managing the health of patients who require emergency medical care through sign language recognition.

Synergistic strengthening of PVA ionic conductive hydrogels using aramid nanofibers and tannic acid for mechanically robust, antifreezing, water-retaining and antibacterial flexible sensors

Ion-conductive hydrogels with multi-functionality have gained significant attraction as flexible sensors in various fields such as wearable health monitoring and human motion detection, owing to their high ion conductivity, excellent flexibility and stretchability, and easy availability. In this work, multifunctional ion-conductive hydrogel with excellent mechanical properties, antifreezing properties, water retention and antibacterial performance was fabricated by the freeze-thaw crosslinking between polyvinyl alcohol (PVA) and aramid nanofibers (ANF), and the subsequent solution immersion crosslinking in a mixture of tannic acid (TA) and CaCl2 solution (DMSO/H2O as co-solvent). The rational engineering of a multi-spatial distributed hydrogen bond and Ca2+ coordination bond networks within the hydrogel led to a significant improvement in mechanical properties. Furthermore, through the introduction of TA and binary solvents (DMSO/H2O), the hydrogel had witnessed a substantial enhancement in its antimicrobial properties and water retention capacity. The resultant PAT5/CaCl2-5% (DMSO/H2O) hydrogel exhibited outstanding elongation at break (754.73%), tensile strength (6.25 MPa), electrical conductivity (3.09 S/m), which can be employed in flexible sensors to monitor real-time functional motion for human under diverse conditions. As such, this innovation opens up a novel pathway for envisioning flexible sensor devices, particularly in the realm of human activity monitoring.

Multifunctional Flexible MXene/AgNW Composite Thin Film with Ultrahigh Conductivity Enabled by a Sandwich-Structured Assembly Strategy

Flexible composite films have attracted considerable attention due to great potential for healthcare, telecommunication, and aerospace. However, it is still challenging to achieve high conductivity and multifunctional integration, mainly due to poorly designed composite structures of these films. Herein, a novel sandwich-structured assembly strategy is proposed to fabricate flexible composite thin films made of Ag nanowire (AgNW) core and MXene layers by combination of spray coating and vacuum filtration process. In this case, ultrathin MXene layers play crucial roles in constructing compact composite structures strongly anchored to substrate with extensive hydrogen-bonding interactions. The resultant sandwich-structured MXene/AgNW composite thin films (SMAFs) exhibit ultrahigh electrical conductivity (up to 27193 S cm-1 ), resulting in exceptional electromagnetic interference shielding effectiveness of 16 223.3 dB cm2 g-1 and impressive Joule heating performance with rapid heating rate of 10.4 °C s-1 . Moreover, the uniform SMAFs can also be facilely cut into kirigami-patterned interconnects, which indicate superior strain-insensitive conductance even after long-term exposure to extreme temperatures. The demonstrated strategy offers a significant paradigm to construct multifunctional composite thin films for next-generation integrated flexible electronics with practical applications.

High-Performance Dual-Responsive Sensing Skin Enabled by Bioinspired Transduction of Coplanar Square-Loop Electrodes

Advancements in intelligent robots and human-machine interaction necessitate a shift in artificial skins toward multimodal perception. Dual-responsive skins that can detect proximity and pressure information are significant to establishing continuous sensing of interaction processes and extending interactive application scenarios. To address the current limitations of inadequate dual-mode performance, such as limited proximal response change and low tactile sensitivity, this paper presents a bioinspired complementary gradient architecture-enabled (CGA) transduction design and a high-performance dual-responsive skin based on coplanar square-loop electrodes. Through systematic investigation into the transduction of various electrode configurations, comparative results reveal the remarkable potential of coplanar electrodes to deliver superior dual-mode performance without compromise. Simulations and experiments prove that the proposed CGA response mechanism can capture local interface deformation and overall compression signals, further enhancing response sensitivity. The final developed artificial skin is sensitive to external pressure and the approach of objects simultaneously, exhibiting a long detection distance (∼40 mm), a high proximity response (>0.4), and outstanding touch sensitivity (0.131 kPa-1). Furthermore, we demonstrate proof-of-concept applications for the proposed sensing skin in a dual-mode teleoperation interface and adaptive grasping interactions.

Advances in Bioresorbable Materials and Electronics

Transient electronic systems represent an emerging class of technology that is defined by an ability to fully or partially dissolve, disintegrate, or otherwise disappear at controlled rates or triggered times through engineered chemical or physical processes after a required period of operation. This review highlights recent advances in materials chemistry that serve as the foundations for a subclass of transient electronics, bioresorbable electronics, that is characterized by an ability to resorb (or, equivalently, to absorb) in a biological environment. The primary use cases are in systems designed to insert into the human body, to provide sensing and/or therapeutic functions for timeframes aligned with natural biological processes. Mechanisms of bioresorption then harmlessly eliminate the devices, and their associated load on and risk to the patient, without the need of secondary removal surgeries. The core content focuses on the chemistry of the enabling electronic materials, spanning organic and inorganic compounds to hybrids and composites, along with their mechanisms of chemical reaction in biological environments. Following discussions highlight the use of these materials in bioresorbable electronic components, sensors, power supplies, and in integrated diagnostic and therapeutic systems formed using specialized methods for fabrication and assembly. A concluding section summarizes opportunities for future research.

A Review of Manufacturing Methods for Flexible Devices and Energy Storage Devices

Given the advancements in modern living standards and technological development, conventional smart devices have proven inadequate in meeting the demands for a high-quality lifestyle. Therefore, a revolution is necessary to overcome this impasse and facilitate the emergence of flexible electronics. Specifically, there is a growing focus on health detection, necessitating advanced flexible preparation technology for biosensor-based smart wearable devices. Nowadays, numerous flexible products are available on the market, such as electronic devices with flexible connections, bendable LED light arrays, and flexible radio frequency electronic tags for storing information. The manufacturing process of these devices is relatively straightforward, and their integration is uncomplicated. However, their functionality remains limited. Further research is necessary for the development of more intricate applications, such as intelligent wearables and energy storage systems. Taking smart wear as an example, it is worth noting that the current mainstream products on the market primarily consist of bracelet-type health testing equipment. They exhibit limited flexibility and can only be worn on the wrist for measurement purposes, which greatly limits their application diversity. Flexible energy storage and flexible display also face the same problem, so there is still a lot of room for development in the field of flexible electronics manufacturing. In this review, we provide a brief overview of the developmental history of flexible devices, systematically summarizing representative preparation methods and typical applications, identifying challenges, proposing solutions, and offering prospects for future development.

Pinaceae Pine Resins (Black Pine, Shore Pine, Rosin, and Baltic Amber) as Natural Dielectrics for Low Operating Voltage, Hysteresis-Free, Organic Field Effect Transistors

Four pinaceae pine resins analyzed in this study: black pine, shore pine, Baltic amber, and rosin demonstrate excellent dielectric properties, outstanding film forming, and ease of processability from ethyl alcohol solutions. Their trap-free nature allows fabrication of virtually hysteresis-free organic field effect transistors operating in a low voltage window with excellent stability under bias stress. Such green constituents represent an excellent choice of materials for applications targeting biocompatibility and biodegradability of electronics and sensors, within the overall effort of sustainable electronics development and environmental friendliness.

Perspectives on recent advancements in energy harvesting, sensing and bio-medical applications of piezoelectric gels

The development of next-generation bioelectronics, as well as the powering of consumer and medical devices, require power sources that are soft, flexible, extensible, and even biocompatible. Traditional energy storage devices (typically, batteries and supercapacitors) are rigid, unrecyclable, offer short-lifetime, contain hazardous chemicals and possess poor biocompatibility, hindering their utilization in wearable electronics. Therefore, there is a genuine unmet need for a new generation of innovative energy-harvesting materials that are soft, flexible, bio-compatible, and bio-degradable. Piezoelectric gels or PiezoGels are a smart crystalline form of gels with polar ordered structures that belongs to the broader family of piezoelectric material, which generate electricity in response to mechanical stress or deformation. Given that PiezoGels are structurally similar to hydrogels, they offer several advantages including intrinsic chirality, crystallinity, degree of ordered structures, mechanical flexibility, biocompatibility, and biodegradability, emphasizing their potential applications ranging from power generation to bio-medical applications. Herein, we describe recent examples of new functional PiezoGel materials employed for energy harvesting, sensing, and wound dressing applications. First, this review focuses on the principles of piezoelectric generators (PEGs) and the advantages of using hydrogels as PiezoGels in energy and biomedical applications. Next, we provide a detailed discussion on the preparation, functionalization, and fabrication of PiezoGel-PEGs (P-PEGs) for the applications of energy harvesting, sensing and wound healing/dressing. Finally, this review concludes with a discussion of the current challenges and future directions of P-PEGs.

Flexible thin film thermocouples: From structure, material, fabrication to application

Flexible thin-film thermocouples (TFTCs) have been garnering interest as temperature sensors due to the advantages of being flexible, ultrathin, and ultralight. Additionally, they have fast response times and enable detection of temperature. These properties have made them suitable for applications such as wearable electronics, healthcare, portable personal devices, and smart detection systems. This review presents the progress in the development of flexible TFTCs. The mechanism, structural design, materials, fabrication methods, and related applications of flexible TFTCs are also elaborated. Finally, future development directions of flexible TFTCs are discussed such as wide-range temperature measurement, multiple sensor integration, and achieving reliable cold-end compensation systems.

Versatility Investigation of Grown Titanium Dioxide Nanoparticles and Their Comparative Charge Storage for Memristor Devices

Memristive devices have garnered significant attention in the field of electronics over the past few decades. The reason behind this immense interest lies in the ubiquitous nature of memristive dynamics within nanoscale devices, offering the potential for revolutionary applications. These applications span from energy-efficient memories to the development of physical neural networks and neuromorphic computing platforms. In this research article, the angle toppling technique (ATT) was employed to fabricate titanium dioxide (TiO2) nanoparticles with an estimated size of around 10 nm. The nanoparticles were deposited onto a 50 nm SiOx thin film (TF), which was situated on an n-type Si substrate. Subsequently, the samples underwent annealing processes at temperatures of 550 °C and 950 °C. The structural studies of the sample were done by field emission gun-scanning electron microscope (FEG-SEM) (JEOL, JSM-7600F). The as-fabricated sample exhibited noticeable clusters of nanoparticles, which were less prominent in the samples annealed at 550 °C and 950 °C. The element composition revealed the presence of titanium (Ti), oxygen (O2), and silicon (Si) from the substrate within the samples. X-ray diffraction (XRD) analysis revealed that the as-fabricated sample predominantly consisted of the rutile phase. The comparative studies of charge storage and endurance measurements of as-deposited, 550 °C, and 950 °C annealed devices were carried out, where as-grown device showed promising responses towards brain computing applications. Furthermore, the teaching-learning-based optimization (TLBO) technique was used to conduct further comparisons of results.

Progress of Photocapacitors

In response to the current trend of miniaturization of electronic devices and sensors, the complementary coupling of high-efficiency energy conversion and low-loss energy storage technologies has given rise to the development of photocapacitors (PCs), which combine energy conversion and storage in a single device. Photovoltaic systems integrated with supercapacitors offer unique light conversion and storage capabilities, resulting in improved overall efficiency over the past decade. Consequently, researchers have explored a wide range of device combinations, materials, and characterization techniques. This review provides a comprehensive overview of photocapacitors, including their configurations, operating mechanisms, manufacturing techniques, and materials, with a focus on emerging applications in small wireless devices, Internet of Things (IoT), and Internet of Everything (IoE). Furthermore, we highlight the importance of cutting-edge materials such as metal-organic frameworks (MOFs) and organic materials for supercapacitors, as well as novel materials in photovoltaics, in advancing PCs for a carbon-free, sustainable society. We also evaluate the potential development, prospects, and application scenarios of this emerging area of research.

Algal-based wood as a green and sustainable alternative for environmentally friendly & flexible electronic devices membrane bioreactor

Electronic are usually constructed from non-renewable, non-biodegradable, and hazardous materials. Due to the frequent upgrading or discarding of electronic devices, which contributes significantly to environmental pollution, there is a high demand for electronics made from renewable and biodegradable materials with less harmful components. To this end, due to their flexibility, strong mechanical, and optical properties, wood-based electronics have become very appealing as substrates especially for flexible electronics and optoelectronics. However, incorporating numerous features including high conductivity and transparency, flexibility, and mechanical robustness into an environmentally friendly electronic device remains very challenging. Herein, authors have provided the techniques used to fabricate sustainable wood based flexible electronics coupled with their chemical, mechanical, optical, thermal, thermomechanical, and surface properties for various applications. Additionally, the synthesis of a conductive ink based on lignin and the development of translucent wood as a substrate are covered. Future developments and broader applications of wood-based flexible materials are discussed in the final section of the study, with an emphasis on their potential in fields including wearable electronics, renewable energy, and biomedical devices. This research improves upon prior efforts by demonstrating new ways to simultaneously attain better mechanical and optical qualities and environmental sustainability.

Highly Stretchable Printed Poly(vinylidene fluoride) Sensors through the Formation of a Continuous Elastomer Phase

Stretchable piezoelectric stress/strain sensing materials have attracted substantial research interest in the fields of wearable health monitoring, motion capturing, and soft robotics. These sensors require operation under dynamic loading conditions with high strain range, changing strain/loading rates, and varying pre-stretch states, which are challenging conditions for existing sensors to produce reliable measurements. To overcome these challenges, an intrinsically stretchable poly(vinylidene fluoride) (PVDF) sensor is developed through the polymer blending of PVDF and acrylonitrile butadiene rubber (NBR). Through precipitation printing and vulcanization, the resulting PVDF/NBR blends exhibit strong β phase PVDF and a blend morphology with submicron-level phase separation, but also strains up to 544%. Both the blend morphology and the mechanical properties indicate that this PVDF/NBR blend can be considered as a continuous elastomer phase above micron scale. After electric poling and adding electrodes, the PVDF/NBR blends have excellent piezoelectric properties to be used as both stretching mode strain sensors and compression mode stress/force sensors. The stretching mode sensors can measure strain up to 70% without strain rate and pre-stretch dependence, while the compression mode sensors have a loading-rate-independent linear voltage-stress relationship up to 4.8 MPa stress and a negligible pre-stretch dependence. Therefore, the PVDF/NBR sensors can provide accurate and reliable stress/strain measurements when attached to soft structures, which paves the way for sensing and calibration of soft robots under dynamic loading conditions.

Tendon-Inspired Anisotropic Hydrogels with Excellent Mechanical Properties for Strain Sensors

Anisotropic conductive hydrogels mimicking the natural tissues with high mechanical properties and intelligent sensing have played an important role in the field of flexible electronic devices. Herein, tensile remodeling, drying, and subsequent ion cross-linking methods were used to construct anisotropic hydrogels, which were inspired by the orientation and functionality of tendons. Due to the anisotropic arrangement of the polymer network, the mechanical performance and electrical conductivity were greatly improved in specific directions. The tensile stress and elastic modulus of the hydrogel along the network orientation were 29.82 and 28.53 MPa, which were higher than those along the vertical orientation, 9.63 and 11.7 MPa, respectively. Moreover, the hydrogels exhibited structure-dependent anisotropic sensing. The gauge factors (GFs) parallel to the prestretching direction were greater than the GF along the vertical direction. Thus, the tendon-inspired conductive hydrogels with anisotropy could be used as flexible sensors for joint motion detection and voice recognition. The anisotropic hydrogel-based sensors are highly expected to promote the great development of emerging soft electronics and medical detection.

A wearable electronic based on flexible pressure sensor for running motion monitoring

The flexible pressure sensor is expected to be applied in the new generation of sports wearable electronic devices. Developing flexible pressure sensors with a wide linear range and great sensitivity, however, remains a significant barrier. In this work, we propose a hybrid conductive elastomeric film oxide-based material with a concave-shape micro-patterned array (P-HCF) on the surface that sustainably shows the necessary sensing qualities. To enhance sensing range and sensitivity, one-dimensional carbon fibers and two-dimensional MXene are incorporated into the polydimethylsiloxane matrix to form a three-dimensional conductive network. Micro-patterns with a curved shape in P-HCFs can be able to linear sensitivity across the sensing range by controlling the pressure distribution inside the material. Besides, the sensitivity of P-HCF pressure sensor can reach 31.92 kPa^-1, and meanwhile, the linear band of P-HCF pressure sensor can arrive at 24 Pa-720 kPa, which makes it a good choice for sports monitoring. The designed pressure sensor can be used to monitor the foot pressure during running. By analyzing the gait information during running, it can provide data support and strategy improvement for running. This new dual working mode pressure P-HCF sensor will provide a new way for the development of intelligent sports.

Nano-Enriched Self-Powered Wireless Body Area Network for Sustainable Health Monitoring Services

Advances in nanotechnology have enabled the creation of novel materials with specific electrical and physical characteristics. This leads to a significant development in the industry of electronics that can be applied in various fields. In this paper, we propose a fabrication of nanotechnology-based materials that can be used to design stretchy piezoelectric nanofibers for energy harvesting to power connected bio-nanosensors in a Wireless Body Area Network (WBAN). The bio-nanosensors are powered based on harvested energy from mechanical movements of the body, specifically the arms, joints, and heartbeats. A suite of these nano-enriched bio-nanosensors can be used to form microgrids for a self-powered wireless body area network (SpWBAN), which can be used in various sustainable health monitoring services. A system model for an SpWBAN with an energy harvesting-based medium access control protocol is presented and analyzed based on fabricated nanofibers with specific characteristics. The simulation results show that the SpWBAN outperforms and has a longer lifetime than contemporary WBAN system designs without self-powering capability.

Ultrasoft and Ultrastretchable Wearable Strain Sensors with Anisotropic Conductivity Enabled by Liquid Metal Fillers

Herein, ultrasoft and ultrastretchable wearable strain sensors enabled by liquid metal fillers in an elastic polymer are described. The wearable strain sensors that can change the effective resistance upon strains are prepared by mixing silicone elastomer with liquid metal (EGaIn, Eutectic gallium-indium alloy) fillers. While the silicone is mixed with the liquid metal by shear mixing, the liquid metal is rendered into small droplets stabilized by an oxide, resulting in a non-conductive liquid metal elastomer. To attain electrical conductivity, localized mechanical pressure is applied using a stylus onto the thermally cured elastomer, resulting in the formation of a handwritten conductive trace by rupturing the oxide layer of the liquid metal droplets and subsequent percolation. Although this approach has been introduced previously, the liquid metal dispersed elastomers developed here are compelling because of their ultra-stretchable (elongation at break of 4000%) and ultrasoft (Young’s modulus of <0.1 MPa) mechanical properties. The handwritten conductive trace in the elastomers can maintain metallic conductivity when strained; however, remarkably, we observed that the electrical conductivity is anisotropic upon parallel and perpendicular strains to the conductive trace. This anisotropic conductivity of the liquid metal elastomer film can manipulate the locomotion of a robot by routing the power signals between the battery and the driving motor of a robot upon parallel and perpendicular strains to the hand-written circuit. In addition, the liquid metal dispersed elastomers have a high degree of deformation and adhesion; thus, they are suitable for use as a wearable sensor for monitoring various body motions.

Wearable and Flexible Multifunctional Sensor Based on Laser-Induced Graphene for the Sports Monitoring System

The conversion of diverse polymeric substrates into laser-induced graphene (LIG) has recently emerged as a single-step method for the fabrication of patterned graphene-based wearable electronics with a wide range of applications in sensing, actuation, and energy storage. Laser-induced pyrolysis technology has many advantages over traditional graphene design: eco-friendly, designable patterning, roll-to-roll production, and controllable morphology. In this work, we designed wearable and flexible graphene-based strain and pressure sensors by laminating LIG from a commercial polyimide (PI) film. The as-prepared LIG was transferred onto a thin polydimethylsiloxane (PDMS) sheet, interwoven inside an elastic cotton sports fabric with the fabric glue as a wearable sensor. The single LIG/PDMS layer acts as a strain sensor, and a two-layer perpendicular stacking of LIG/PDMS (x and y laser-directed films) is designed for pressure sensing. This newly designed graphene textile (IGT) sensor performs four functions in volleyball sportswear, including volleyball reception detection, finger touch foul detection during blocking the ball from an opponent player, spike force measurements, and player position monitoring. An inexpensive sensor assists athletes in training and helps the coach formulate competition strategies.

Advanced Three-Dimensional Microelectrode Architecture Design for High-Performance On-Chip Micro-Supercapacitors

The rapid development of miniaturized electronic devices has greatly stimulated the endless pursuit of high-performance on-chip micro-supercapacitors (MSCs) delivering both high energy and power densities. To this end, an advanced three-dimensional (3D) microelectrode architecture design offers enormous opportunities due to high mass loading of active materials, large specific surface areas, fast ion diffusion kinetics, and short electron transport pathways. In this review, we summarize the recent advances in the rational design of 3D architectured microelectrodes including 3D dense microelectrodes, 3D nanoporous microelectrodes, and 3D macroporous microelectrodes. Furthermore, the emergent microfabrication strategies are discussed in detail in terms of charge storage mechanisms and structure-performance correlation for on-chip MSCs. Finally, we conclude with a perspective on future opportunities and challenges in this thriving field.

Fabrication of Cu Micromembrane as a Flexible Electrode

A Cu micromembrane is successfully fabricated and validated as a porous flexible electrode. The Cu micromembrane is prepared by functionalizing individual polypropylene (PP) fibers in a polypropylene micromembrane (PPMM) using a mixture of polydopamine (PDA) and polyethyleneimine (PEI). The mixture of PDA and PEI provides adhesive, wetting, and reducing functionalities that facilitate subsequent Ag activation and Cu electroless plating. Scanning electron microscopy reveals conformal deposition of Cu on individual PP fibers. Porometer analysis indicates that the porous nature of PPMM is properly maintained. The Cu micromembrane demonstrates impressive electrical conductivities in both the X direction (1.04 ± 0.21 S/cm) and Z direction (2.99 ± 0.54 × 10^-3 S/cm). In addition, its tensile strength and strain are better than those of pristine PPMM. The Cu micromembrane is flexible and mechanically robust enough to sustain 10,000 bending cycles with moderate deterioration. Thermogravimetric analysis shows a thermal stability of 400 °C and an effective Cu loading of 5.36 mg/cm². Cyclic voltammetric measurements reveal that the Cu micromembrane has an electrochemical surface area of 277.8 cm² in a 1 cm² geometric area (a roughness factor of 227.81), a value that is 45 times greater than that of planar Cu foil.

Localized Surface Hydrophilicity Tailoring of Polyimide Film for Flexible Electronics Manufacturing Using an Atmospheric Pressure Ar/H2O Microplasma Jet

The poor hydrophilicity of polyimide (PI) films limits their applications in flexible electronics, such as in wearable and implantable bio-MEMS devices. In this paper, an atmospheric pressure Ar/H2O microplasma jet (μAPPJ) with a nozzle diameter of 100 μm was utilized to site-selectively tune the surface hydrophilicity of a PI film. The electrical and optical characteristics of the μAPPJ were firstly investigated, and the results showed that multi-spikes occurred during the plasma discharge and that diverse reactive species, such as O atoms and OH radicals, were generated in the plasma plume. The physical and chemical properties of pristine and microplasma-modified PI surfaces were characterized by the water contact angle (WCA), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The wettability of the PI surface was significantly enhanced after microplasma modification, and the WCA could be adjusted by varying the applied voltage, water vapor content, plasma treatment time and storage time. The AFM images indicated that the surface roughness increased after the plasma treatment, which partially contributed to an improvement in the surface hydrophilicity. The XPS results showed a reduction in the C content and an increase in the O content, and abundant hydrophilic polar oxygen-containing functional groups were also grafted onto the PI film surface. Finally, the interaction mechanism between the PI molecular chains and the microplasma is discussed. The breaking of C-N and C-O bonds and the grafting of OH radicals were the key pathways to dominate the reaction process.

A Kinetic Model for the Generation and Annihilation of Thermally Induced Carrier Donors in a Semiconducting Metal-Oxide Thin Film

Based on a kinetic model involving oxidant diffusion and an oxidation-reduction reaction, a 3-parameter equation is derived relating the change in the concentration of thermally induced carrier donors in common metal-oxide semiconductors (such as indium-gallium-zinc oxide and indium-tin-zinc oxide) to heat-treatment time. The change in the concentration of such donors is characterized by measuring the shift in the turn-on voltage of a thin-film transistor subjected to heat treatments in different atmospheres for different durations. The model parameters are extracted using optimal curve-fitting techniques, leading to the determination of relevant activation energies from the temperature dependence of the extracted parameters. The proposed model is found to be applicable to metal-oxide semiconductors of different compositions. It is discovered that the generation of donors in a non-oxidizing atmosphere is largely suppressed at a temperature below 250 °C, but the effective annihilation of the donors spans over a wider temperature range in an oxidizing atmosphere.

Biodegradable polymeric materials for flexible and degradable electronics

Biodegradable electronics have great potential to reduce the environmental footprint of electronic devices and to avoid secondary removal of implantable health monitors and therapeutic electronics. Benefiting from the intensive innovation on biodegradable nanomaterials, current transient electronics can realize full components’ degradability. However, design of materials with tissue-comparable flexibility, desired dielectric properties, suitable biocompatibility and programmable biodegradability will always be a challenge to explore the subtle trade-offs between these parameters. In this review, we firstly discuss the general chemical structure and degradation behavior of polymeric biodegradable materials that have been widely studied for various applications. Then, specific properties of different degradable polymer materials such as biocompatibility, biodegradability, and flexibility were compared and evaluated for real-life applications. Complex biodegradable electronics and related strategies with enhanced functionality aimed for different components including substrates, insulators, conductors and semiconductors in complex biodegradable electronics are further researched and discussed. Finally, typical applications of biodegradable electronics in sensing, therapeutic drug delivery, energy storage and integrated electronic systems are highlighted. This paper critically reviews the significant progress made in the field and highlights the future prospects.

Triboelectric nanogenerators as wearable power sources and self-powered sensors

Smart wearable technologies are augmenting human bodies beyond our biological capabilities in communication, healthcare and recreation. Energy supply and information acquisition are essential for wearable electronics, whereas the increasing demands in multifunction are raising the requirements for energy and sensor devices. The triboelectric nanogenerator (TENG), proven to be able to convert various mechanical energies into electricity, can fulfill either of these two functions and therefore has drawn extensive attention and research efforts worldwide. The everyday life of a human body produces considerable mechanical energies and, in the meantime, the human body communicates mainly through mechanical signals, such as sound, body gestures and muscle movements. Therefore, the TENG has been intensively studied to serve as either wearable sources or wearable self-powered sensors. Herein, the recent finding on the fundamental understanding of TENGs is revisited briefly, followed by a summary of recent advancements in TENG-based wearable power sources and self-powered sensors. The challenges and prospects of this area are given as well.

3D printing of nanowrinkled architectures via laser direct assembly

Structural wrinkles in nature have been widely imitated to enhance the surface functionalities of objects, especially three-dimensional (3D) architectured wrinkles, holding promise for emerging applications in mechanical, electrical, and biological processes. However, the fabrication of user-defined 3D nanowrinkled architectures is a long-pending challenge. Here, we propose a bottom-up laser direct assembly strategy to fabricate multidimensional nanowrinkled architectures in a single-material one-step process. Through the introduction of laser-induced thermal transition into a 3D nanoprinting process for leading the point-by-point nanoscale wrinkling and the self-organization of wrinkle structures, we have demonstrated the program-controlled and on-demand fabrication of multidimensional nanowrinkled structures. Moreover, the precise control of wrinkle morphology with an optimal wavelength of 40 nanometers and the regulation of the dynamic transformation of wrinkled cellular microstructures via interfacial stress mismatch engineering have been achieved. This study provides a universal protocol for constructing nearly arbitrary nanowrinkled architectures and facilitates a new paradigm in nanostructure manufacturing.