A Facile Route to Aryl Boronates: Room-Temperature, Copper-Catalyzed Borylation of Aryl Halides with Alkoxy Diboron Reagents

Electron-Precise Dicationic Tetraboranes: Syntheses, Structures and Rearrangement to an Alkylidene Borate-Borenium Zwitterion and a 1,3-Azaborinine

Carbene-stabilized symmetrical and unsymmetrical dicationic tetraboranes, featuring an electron-precise tetraborane chain, were synthesized and fully characterized. Reactions of these tetraboranes with reductants/bases give rise to different outcomes according to the conditions employed, including: 1) reduction and rearrangement of the tetraborane chain to give a zwitterionic alkylidene borate-borenium species; 2) cleavage of the tetraborane chain to afford a 1,3-azaborinine; and 3) reduction of the supporting ligands to provide a diamino dipotassium salt. The zwitterionic alkylidene borate-borenium species can be viewed as an analogue of the base-stabilized diborenes. NMR spectroscopy and DFT calculations reveal a highly polarized B-B bond in the zwitterionic alkylidene borate-borenium, in which the formal oxidation states of the boron atoms can be considered as -1 and +2. These results suggest the considerable potential of tetraboranes as synthons for low-valent boron species.

Copper-Catalyzed Borylation of Acyl Chlorides with an Alkoxy Diboron Reagent: A Facile Route to Acylboron Compounds

Herein, the copper-catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B2 pin2 ) or bis(neopentane glycolato)diboron (B2 neop2 ) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon-skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N-methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late-stage conversion of carboxylic acid-containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p-toluoyl chloride and an NHC-copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate.

Selective, Transition Metal-free 1,2-Diboration of Alkyl Halides, Tosylates, and Alcohols

Defunctionalization of readily available feedstocks to provide alkenes for the synthesis of multifunctional molecules represents an extremely useful process in organic synthesis. Herein, we describe a transition metal-free, simple and efficient strategy to access alkyl 1,2-bis(boronate esters) via regio- and diastereoselective diboration of secondary and tertiary alkyl halides (Br, Cl, I), tosylates, and alcohols. Control experiments demonstrated that the key to this high reactivity and selectivity is the addition of a combination of potassium iodide and N,N-dimethylacetamide (DMA). The practicality and industrial potential of this transformation are demonstrated by its operational simplicity, wide functional group tolerance, and the late-stage modification of complex molecules. From a drug discovery perspective, this synthetic method offers control of the position of diversification and diastereoselectivity in complex ring scaffolds, which would be especially useful in a lead optimization program.

Base-Mediated Radical Borylation of Alkyl Sulfones

A practical and direct method was developed for the production of versatile alkyl boronate esters via transition metal-free borylation of primary and secondary alkyl sulfones. The key to the success of the strategy is the use of bis(neopentyl glycolato) diboron (B2 neop2 ), with a stoichiometric amount of base as a promoter. The practicality and industrial potential of this protocol are highlighted by its wide functional group tolerance, the late-stage modification of complex compounds, no need for further transesterification, and operational simplicity. Radical clock, radical trap experiments, and EPR studies were conducted which show that the borylation process involves radical intermediates.

Enantioselective Construction of Modular and Asymmetric Baskets

The precise positioning of functional groups about the inner space of abiotic hosts is a challenging task and of interest for developing more effective receptors and catalysts akin to those found in nature. To address it, we herein report a synthetic methodology for preparing basket-like cavitands comprised of three different aromatics as side arms with orthogonal esters at the rim for further functionalization. First, enantioenriched A (borochloronorbornene), B (iodobromonorbornene), and C (boronorbornene) building blocks were obtained by stereoselective syntheses. Second, consecutive A-to-B and then AB-to-C Suzuki-Miyaura (SM) couplings were optimized to give enantioenriched ABC cavitand as the principal product. The robust synthetic protocol allowed us to prepare (a) an enantioenriched basket with three benzene sides and each holding either tBu, Et, or Me esters, (b) both enantiomers of a so-called "spiral staircase" basket with benzene, naphthalene, and anthracene groups surrounding the inner space, and (c) a photo-responsive basket bearing one anthracene and two benzene arms.

Ligand-Enabled δ-C(sp3 )-H Borylation of Aliphatic Amines

Directed C-H functionalization has been realized as a complimentary technique to achieve borylation at a distal position of aliphatic amines. Here, we demonstrated the oxidative borylation at the distal δ-position of aliphatic amines using various borylating agents, a palladium catalyst, and a rightly tuned ligand in the presence of a cheap oxidant. Moreover, an organopalladium δ-C(sp³ )-H-activated intermediate has been isolated and crystallographically characterized to get mechanistic insight.

Activation of Aryl Carboxylic Acids by Diboron Reagents towards Nickel-Catalyzed Direct Decarbonylative Borylation

The Ni-catalyzed decarbonylative borylation of (hetero)aryl carboxylic acids with B₂ cat₂ has been achieved without recourse to any additives. This Ni-catalyzed method exhibits a broad substrate scope covering poorly reactive non-ortho-substituted (hetero)aryl carboxylic acids, and tolerates diverse functional groups including some of the groups active to Ni⁰ catalysts. The key to achieve this decarbonylative borylation reaction is the choice of B₂ cat₂ as a coupling partner that not only acts as a borylating reagent, but also chemoselectively activates aryl carboxylic acids towards oxidative addition of their C(acyl)-O bond to Ni⁰ catalyst via the formation of acyloxyboron compounds. A combination of experimental and computational studies reveals a detailed plausible mechanism for this reaction system, which involves a hitherto unknown concerted decarbonylation and reductive elimination step that generates the aryl boronic ester product. This mode of boron-promoted carboxylic acid activation is also applicable to other types of reactions.

B-B vs. B-H Bond Activation in a (μ-Hydrido)diborane(4) Anion upon Cycloaddition with CO2 , Isocyanates, or Carbodiimides

The intriguing (μ‐hydrido)diboranes(4) with their prominent pristine representative [B₂H₅]⁻ have mainly been studied theoretically. We now describe the behavior of the planarized tetraaryl (μ‐hydrido)diborane(4) anion [1H]⁻ in cycloaddition reactions with the homologous series of heterocumulenes CO₂, iPrNCO, and iPrNCNiPr. We show that a C=O bond of CO₂ selectively activates the B−B bond of [1H]⁻, while the μ‐H ligand is left untouched ([2H]⁻). The carbodiimide iPrNCNiPr, in contrast, neglects the B−B bond and rather adds the B‐bonded H⁻ ion to its central C atom to generate a formamidinate bridge across the B₂ pair ([3]⁻). As a hybrid, the isocyanate iPrNCO combines the reactivity patterns of both its congeners and gives two products: one of them ([4H]⁻) is related to [2H]⁻, the other ([5]⁻) is an analog of [3]⁻. We finally propose a mechanistic scenario that rationalizes the individual reaction outcomes and combines them to a coherent picture of B–B vs. B–H bond activation.

Ni-Catalyzed Borylation of Aryl Sulfoxides

A nickel/N-heterocyclic carbene (NHC) catalytic system has been developed for the borylation of aryl sulfoxides with B2 (neop)2 (neop=neopentyl glycolato). A wide range of aryl sulfoxides with different electronic and steric properties were converted into the corresponding arylboronic esters in good yields. The regioselective borylation of unsymmetric diaryl sulfoxides was also feasible leading to borylation of the sterically less encumbered aryl substituent. Competition experiments demonstrated that an electron-deficient aryl moiety reacts preferentially. The origin of the selectivity in the Ni-catalyzed borylation of electronically biased unsymmetrical diaryl sulfoxide lies in the oxidative addition step of the catalytic cycle, as oxidative addition of methoxyphenyl 4-(trifluoromethyl)phenyl sulfoxide to the Ni(0) complex occurs selectively to give the structurally characterized complex trans-[Ni(ICy)2 (4-CF3 -C6 H4 ){(SO)-4-MeO-C6 H4 }] 4. For complex 5, the isomer trans-[Ni(ICy)2 (C6 H5 )(OSC6 H5 )] 5-I was structurally characterized in which the phenyl sulfinyl ligand is bound via the oxygen atom to nickel. In solution, the complex trans-[Ni(ICy)2 (C6 H5 )(OSC6 H5 )] 5-I is in equilibrium with the S-bonded isomer trans-[Ni(ICy)2 (C6 H5 )(SOC6 H5 )] 5, as shown by NMR spectroscopy. DFT calculations reveal that these isomers are separated by a mere 0.3 kJ/mol (M06/def2-TZVP-level of theory) and connected via a transition state trans-[Ni(ICy)2 (C6 H5 )(η2 -{SO}-C6 H5 )], which lies only 10.8 kcal/mol above 5.

The graphite-catalyzed ipso-functionalization of arylboronic acids in an aqueous medium: metal-free access to phenols, anilines, nitroarenes, and haloarenes

An efficient, metal-free, and sustainable strategy has been described for the ipso-functionalization of phenylboronic acids using air as an oxidant in an aqueous medium. A range of carbon materials has been tested as carbocatalysts. To our surprise, graphite was found to be the best catalyst in terms of the turnover frequency. A broad range of valuable substituted aromatic compounds, i.e., phenols, anilines, nitroarenes, and haloarenes, has been prepared via the functionalization of the C-B bond into C-N, C-O, and many other C-X bonds. The vital role of the aromatic π-conjugation system of graphite in this protocol has been established and was observed via numerous analytic techniques. The heterogeneous nature of graphite facilitates the high recyclability of the carbocatalyst. This effective and easy system provides a multipurpose approach for the production of valuable substituted aromatic compounds without using any metals, ligands, bases, or harsh oxidants.

Base-Free Pd-Catalyzed C-Cl Borylation of Fluorinated Aryl Chlorides

Catalytic C-X borylation of aryl halides containing two ortho-fluorines has been found to be challenging, as most previous methods require stoichiometric amounts of base and the polyfluorinated aryl boronates suffer from protodeboronation, which is accelerated by ortho-fluorine substituents. Herein, we report that a combination of Pd(dba)2 (dba=dibenzylideneacetone) with SPhos (2-dicyclohexylphosphino-2',6'-dimethoxybiphenyl) as a ligand is efficient to catalyze the C-Cl borylation of aryl chlorides containing two ortho-fluorine substituents. This method, conducted under base-free conditions, is compatible with the resulting di-ortho-fluorinated aryl boronate products which are sensitive to base.

Copper-Catalyzed Borylative Couplings with C-N Electrophiles

Copper-catalyzed borylative multicomponent reactions (MCRs) involving olefins and C-N electrophiles are a powerful tool to rapidly build up molecular complexity. The products from these reactions contain multiple functionalities, such as amino, cyano and boronate groups, that are ubiquitous in medicinal and process chemistry programs. Copper-catalyzed MCRs are particularly attractive because they use a relatively abundant and non-toxic catalyst to selectively deliver high-value products from simple feedstocks such as olefins. In this Minireview, we explore this rapidly emerging field and survey the borylative union of allenes, dienes, styrenes and other olefins, with imines, nitriles and related C-N electrophiles.

Desymmetrization of Dicationic Diboranes by Isomerization Catalyzed by a Nucleophile

Cationic monoboranes exhibit a rich chemistry. By constrast, only a few cationic diboranes are known, that all are symmetrically substituted. In this work, the first unsymmetrically substituted dicationic diboranes, featuring sp2 -sp2 -hybridized boron atoms, are reported. The compounds are formed by intramolecular rearrangement from preceding isomeric symmetrically substituted dicationic diboranes, a process that is catalyzed by nucleophiles. From the temperature-dependence of the isomerization rate, activation parameters for this unprecedented rearrangement are derived. The difference in fluoride ion affinity between the two boron atoms and the bonding situation in these unique unsymmetrical dicationic diboranes are evaluated.

B-B Bond Nucleophilicity in a Tetraaryl μ-Hydridodiborane(4) Anion

The tetraaryl μ‐hydridodiborane(4) anion [2H]⁻ possesses nucleophilic B−B and B−H bonds. Treatment of K[2H] with the electrophilic 9‐H‐9‐borafluorene (HBFlu) furnishes the B₃ cluster K[3], with a triangular boron core linked through two BHB two‐electron, three‐center bonds and one electron‐precise B−B bond, reminiscent of the prominent [B₃H₈]⁻ anion. Upon heating or prolonged stirring at room temperature, K[3] rearranges to a slightly more stable isomer K[3 a]. The reaction of M[2H] (M⁺=Li⁺, K⁺) with MeI or Me₃SiCl leads to equimolar amounts of 9‐R‐9‐borafluorene and HBFlu (R=Me or Me₃Si). Thus, [2H]⁻ behaves as a masked [:BFlu]⁻ nucleophile. The HBFlu by‐product was used in situ to establish a tandem substitution‐hydroboration reaction: a 1:1 mixture of M[2H] and allyl bromide gave the 1,3‐propylene‐linked ditopic 9‐borafluorene 5 as sole product. M[2H] also participates in unprecedented [4+1] cycloadditions with dienes to furnish dialkyl diaryl spiroborates, M[R₂BFlu].

Regio- and Stereoselective Synthesis of 1,1-Diborylalkenes via Brønsted Base-Catalyzed Mixed Diboration of Alkynyl Esters and Amides with BpinBdan

The NaOtBu-catalyzed mixed 1,1-diboration of terminal alkynes using the unsymmetrical diboron reagent BpinBdan (pin = pinacolato; dan = 1,8-diaminonaphthalene) proceeds in a regio- and stereoselective fashion affording moderate to high yields of 1,1-diborylalkenes bearing orthogonal boron protecting groups. It is applicable to gram-scale synthesis without loss of yield or selectivity. The mixed 1,1-diborylalkene products can be utilized in Suzuki-Miyaura cross-coupling reactions which take place selectivly at the C-B site. DFT calculations suggest the NaOtBu-catalyzed mixed 1,1-diboration of alkynes occurs through deprotonation of the terminal alkyne, stepwise addition of BpinBdan to the terminal carbon followed by protonation with tBuOH. Experimentally observed selective formation of (Z)-diborylalkenes is supported by our theoretical studies.

Borylation of Diazonium Salts by Highly Emissive and Crystalline Carbon Dots in Water

Efficient borylation reaction of diazonium salts in water is realized for the first time by using easily prepared, highly emissive and crystalline carbon dots. Electron-donating and electron-withdrawing groups on diazonium salts were well tolerated with moderate to good conversion efficiency. Compared with widely used metal complexes, organic dyes and quantum dots, the approach presented herein uses carbon dots, which are nontoxic and possess good biological and medicinal compatibility and high reactivity. Therefore, this approach presents a new prospective use for carbon dots in green chemistry.

Hexahalodiborate Dianions: A New Family of Binary Boron Halides

The electron‐precise binary boron subhalide species [B₂X₆]²⁻ X=F, Br, I) were synthesized and their structures confirmed by X‐ray crystallography. The existence of the previously claimed [B₂Cl₆]²⁻, which had been questioned, was also confirmed by X‐ray crystallography. The dianions are isoelectronic to hexahaloethanes, are subhalide analogues of the well‐known tetrahaloborate anions (BX₄⁻), and are rare examples of molecular electron‐precise binary boron species beyond B₂X₄, BX₃, and [BX₄]⁻.

Copper-Photocatalyzed Borylation of Organic Halides under Batch and Continuous-Flow Conditions

The copper-photocatalyzed borylation of aryl, heteroaryl, vinyl and alkyl halides (I and Br) was reported. The reaction proceeded using a new heteroleptic Cu complex under irradiation with blue LEDs, giving the corresponding boronic-acid esters in good to excellent yields. The reaction was extended to continuous-flow conditions to allow an easy scale-up. The mechanism of the reaction was studied and a mechanism based on a reductive quenching (Cu^I /Cu^I */Cu⁰ ) was suggested.

Synthesis and Reduction of Sterically Encumbered Mesoionic Carbene-Stabilized Aryldihaloboranes

Sterically hindered, in situ generated 1,3,4-substituted 1,2,3-triazol-5-ylidene mesoionic carbenes (MICs) were employed to stabilize a number of aryl- and heteroaryldihaloboranes, as well as the first MIC-supported diborane. Reduction of borane adducts of the 1-(2,6-diisopropylphenyl)-3-methyl-4-tert-butyl-1,2,3-triazol-5-ylidene ligand with KC₈ in non-coordinating solvents led to intramolecular C-H- and, C-C-activation at an isopropyl residue of the supporting ligand. DFT calculations showed that each of these activation reactions proceeds via a different isomer of a borylene intermediate.

Convenient and General Zinc-Catalyzed Borylation of Aryl Diazonium Salts and Aryltriazenes under Mild Conditions

A convenient and general zinc‐catalyzed borylation of aryl diazonium salts and aryltriazenes has been developed. With bis‐ (pinacolato)diboron as the borylation reagent, aryldiazonium tetrafluoroborate salts and aryltriazenes were transformed into the corresponding arylboronates in moderate to excellent yields under mild conditions. As a convenient and practical methodology, no additional ligands, base, or any other additives are required here.

Direct Introduction of a Dimesitylboryl Group Using Base-Mediated Substitution of Aryl Halides with Silyldimesitylborane

The first dimesitylboryl substitution of aryl halides with a silylborane bearing a dimesitylboryl group in the presence of alkali-metal alkoxides is described. The reactions of aryl bromides or iodides with Ph₂ MeSi-BMes₂ and Na(OtBu) afforded the desired aryl dimesitylboranes in good to high yields and with high borylation/silylation ratios. Selective reaction of the sterically less-hindered C-Br bond of dibromoarenes provided monoborylated products. This reaction was used to rapidly construct a D-π-A aryl dimesityl borane with a non-symmetrical biphenyl spacer.