Hydrogen-bonded Complex-based Frameworks for Stable Lithium Storage

Metal-complex-based materials for lithium storage have attracted great interest due to their highly designable structures with multiple active sites and well-defined lithium transport pathways. Their cycling and rate performances, however, are still constrained by structural stability and electrical conductivity. Herein, we present two hydrogen-bonded complex-based frameworks with excellent lithium storage capability. Multiple hydrogen bonds among the mononuclear molecules result in three-dimensional frameworks that are stable in electrolyte. The origin of the remarkable lithium storage performance of this family was revealed through kinetic analysis and DFT calculations.

Design of a Cellulose-Based Supercapacitor Based on Polymerization-Doping Phase Inversion of a Polydopamine-Modified Separator and a Polypyrrole/Graphene-Doped Membrane Electrode

The cellulose-based polydopamine modified separator (LID-PDA) and polydopamine/graphene/polypyrrole modified electrode (LID-PDA-GR/PPy) were successfully fabricated by dissolving-regenerating and phase-inversion methods via dopamine polymerization and doping modification of graphene (GR) and polypyrrole (PPy) in a lithium chloride/N,N-dimethylacetamide solvent system. The structure and physical properties of the LID-PDA film material play a positive role in its application in supercapacitor separators and electrodes. The effect of PPy content on the electrochemical performance of the electrode shows that the LID-PDA-GR/PPy-30 electrode has the best performance (2.2 Ω, 237.2 F/g at 0.5 A/g). The cellulose-based supercapacitor assembled from the LID-PDA-GR/PPy-30 electrode and LID-PDA separator shows good electrochemical energy storage properties (439.0 F/g at 0.2 A/g, 36.2 Wh/kg corresponding to 2.2 kW/kg). Based on the microstructural properties of natural and renewable cellulose substrates, combining polymerization and doping to realize the complementarity between materials is meaningful for the application and development of energy storage materials.

Two-Dimensional MXene-Polymer Heterostructure with Ordered In-Plane Mesochannels for High-Performance Capacitive Deionization

The application of traditional electrode materials for high-performance capacitive deionization (CDI) has been persistently limited by their low charge-storage capacities, excessive co-ion expulsion and slow salt removal rates. Here we report a bottom-up approach to the preparation of a two-dimensional (2D) Ti₃ C₂ T_x MXene-polydopamine heterostructure having ordered in-plane mesochannels (denoted as mPDA/MXene). Interfacial self-assembly of mesoporous polydopamine (mPDA) monolayers on MXene nanosheets leads to the mPDA/MXene heterostructure, which exhibits several unique features: (1) MXene undergoes reversible ion intercalation/deintercalation and possesses high conductivity; (2) mPDA layers establish redox capacitive characteristics and Na⁺ selectivity, and also help to prevent self-stacking and oxidation of MXene; (3) in-plane mesochannels enable the smooth transport of ions at the internal spaces of this stacked 2D material. When applied as an electrode material for CDI, mPDA/MXene nanosheets exhibit top-level CDI performance and cycling stability compared to those of the so far reported 2D materials. Our study opens an avenue for the rational construction of MXene-organic hybrid heterostructures, and further motivates the development of high-performance CDI electrode materials.

A phthalocyanine-grafted MA-VA framework polymer as a high performance anode material for lithium/sodium-ion batteries

A porous MA-VA-PcNi polymer was prepared by grafting nickel phthalocyanine (PcNi) onto the main chain of a maleic anhydride-vinyl acetate (MA-VA) polymer, and an MA-VA-PcNi electrode is prepared by electrospinning technology to inhibit the agglomeration of the active powder effectively, which produces spherical particles with a diameter of 100-300 nm. The synthesized MA-VA-PcNi polymer is used as the anode for lithium-ion and sodium-ion batteries, exhibiting excellent energy storage behaviors. The MA-VA-PcNi/Li battery displays a high capacity of 610 mA h g-1 and can still remain at 507 mA h g-1 with a retention rate of 83.1% after 400 cycles at a current density of 200 mA g-1. Even at a high current density of 2 A g-1, the specific capacity can remain at 195 mA h g-1. In addition, the MA-VA-PcNi/Na battery displays a high capacity of 336 mA h g-1 and can still remain at 278 mA h g-1 with a retention rate of 82.7% after 400 cycles at a current density of 100 mA g-1. A high specific capacity of 164 mA h g-1 can also be achieved at a high current density of 1 A g-1. After nickel phthalocyanine (PcNi) was grafted onto the MA-VA polymer, aggregation between phthalocyanine rings was effectively prevented, and this exposes more active sites. At the same time, the spherical particles obtained by electrospinning technology further improve the dispersion and increase the number of active sites of the active materials. Finally, the electrode materials show excellent energy storage behavior for lithium-ion and sodium-ion batteries, which provides a new idea for designing high-performance energy storage materials for organic electrodes.

Insights into the Capacity and Rate Performance of Transition-Metal Coordination Compounds for Reversible Lithium Storage

Coordination compounds are well-known compounds that are being used as new materials for lithium storage because of their unique advantages, that is, designable structures, abundant active sites, and facile as well as mild synthetic routes. However, the electrode stability, low rate performance, and cycle life of coordination compounds are currently the main issues preventing their application as electrode materials, and the lithium-storage mechanism in coordination networks is not well understood. Herein, isostructural one-dimensional coordination compounds were synthesized to study their lithium-storage performance. Co-HIPA and Ni-HIPA showed superior electrolyte stability than other M-HIPAs, and Co-HIPA displayed a superior reversible capacity and cycle stability, excellent rate performance, and clear voltage platform. DFT calculations and kinetic analysis revealed the influence of the metal center with different electronic structures on the lithium-storage mechanism.

A Self-Polymerized Nitro-Substituted Conjugated Carbonyl Compound as High-Performance Cathode for Lithium-Organic Batteries

Conjugated carbonyl compounds have received much attention as cathode materials for developing green lithium-ion batteries (LIBs). However, their high dissolution and poor electronic conductivity in organic electrolyte restrict their further application. Herein, a self-polymerized nitro-substituted conjugated carbonyl compound (2,7-dinitropyrene-4,5,9,10-tetraone, PT-2 NO₂ ) is applied as a high-performance cathode material for LIBs. PT-2 NO₂ exhibits a high reversible capacity of 153.9 mAh g^-1 at 50 mA g^-1 after 120 cycles, which is higher than that of other substituted compounds. Detailed characterization and theoretical calculations have testified that PT-2 NO₂ is transformed into an azo polymer through an irreversible reductive coupling reaction in the first discharge process, and then carbonyl and azo groups reversibly react with Li ions in subsequent cycles. In addition, this azo polymer is also synthesized and applied as the electrode material, which shows similar electrochemical performance to PT-2 NO₂ but with higher initial coulombic efficiency. Thus, this work provides a simple but effectively way to construct organic cathode materials with multiple redox sites for green and high-performance LIBs.

Empowering organic-based negative electrode material based on conjugated lithium carboxylate through molecular design

In this article, we describe the design and gram-scale synthesis of a new anthracene-based negative electrode material for Li-ion batteries. Based on rational design, featuring a strong electronic delocalization and a long conjugation length, this material has power performance to date unmatched for a conjugated lithium carboxylate, displaying a gravimetric capacity of 150 mAh g^-1 at a cycling rate of 20 Li⁺ /h (10 C) without any electrode engineering. Additionally, to the design, partial solubility of the fully reduced phase may also explain the electrochemical performances obtained at a low and high rate.

Long-lifespan Polyanionic Organic Cathodes for Highly Efficient Organic Sodium-ion Batteries

An organic Na-ion battery is reported with a polyanionic 9,10-anthraquinone-2,6-disulfonate (Na₂ AQ26DS, 130 mAh g^-1 ) cathode and the Na-intercalated state (Na₄ TP) of sodium terephthalate (Na₂ TP, 255 mAh g^-1 ) as the anode. The resulting full cells deliver the maximum discharge capacity of 131 mAh g^-1 _cathode in 0.5-3.2 V, simultaneously maintaining the average value of ≈62 mAh g^-1 _cathode during 1200 cycles (0.5 A g^-1 , ≈4 C). These results are among the best performing organic sodium-ion full cells reported to date.

Materials Strategies and Device Architectures of Emerging Power Supply Devices for Implantable Bioelectronics

Implantable bioelectronics represent an emerging technology that can be integrated into the human body for diagnostic and therapeutic functions. Power supply devices are an essential component of bioelectronics to ensure their robust performance. However, conventional power sources are usually bulky, rigid, and potentially contain hazardous constituent materials. The fact that biological organisms are soft, curvilinear, and have limited accommodation space poses new challenges for power supply systems to minimize the interface mismatch and still offer sufficient power to meet clinical-grade applications. Here, recent advances in state-of-the-art nonconventional power options for implantable electronics, specifically, miniaturized, flexible, or biodegradable power systems are reviewed. Material strategies and architectural design of a broad array of power devices are discussed, including energy storage systems (batteries and supercapacitors), power devices which harvest sources from the human body (biofuel cells, devices utilizing biopotentials, piezoelectric harvesters, triboelectric devices, and thermoelectric devices), and energy transfer devices which utilize sources in the surrounding environment (ultrasonic energy harvesters, inductive coupling/radiofrequency energy harvesters, and photovoltaic devices). Finally, future challenges and perspectives are given.

Local Electric-Field-Driven Fast Li Diffusion Kinetics at the Piezoelectric LiTaO3 Modified Li-Rich Cathode-Electrolyte Interphase

As one of the most promising cathodes for next-generation lithium ion batteries (LIBs), Li-rich materials have been extensively investigated for their high energy densities. However, the practical application of Li-rich cathodes is extremely retarded by the sluggish electrode-electrolyte interface kinetics and structure instability. In this context, piezoelectric LiTaO3 is employed to functionalize the surface of Li1.2Ni0.17Mn0.56Co0.07O2 (LNMCO), aiming to boost the interfacial Li+ transport process in LIBs. The results demonstrate that the 2 wt% LiTaO3-LNMCO electrode exhibits a stable capacity of 209.2 mAh g-1 at 0.1 C after 200 cycles and 172.4 mAh g-1 at 3 C. Further investigation reveals that such superior electrochemical performances of the LiTaO3 modified electrode results from the additional driving force from the piezoelectric LiTaO3 layer in promoting Li+ diffusion at the interface, as well as the stabilized bulk structure of LNMCO. The supplemented LiTaO3 layer on the LNMCO surface herein, sheds new light on the development of better Li-rich cathodes toward high energy density applications.

Cross-Conjugated Polycatechol Organic Cathode for Aqueous Zinc-Ion Storage

The rapid development of aqueous zinc-ion batteries poses a challenge for the exploration of cathode materials with high capacity and long cycle life. Organic materials are considered an appropriate choice owing to their structural flexibility and tunable surface chemistry. However, most organic cathode materials still have some shortcomings, such as low electrical conductivity, high cost, and limited cycling durability. Here, a facile synthesis of a novel organic composite cathode composed of cross-conjugated polycatechol (PC) combined with graphene (PC/G) is reported. The PC/G cathode is used for aqueous zinc-ion storage, wherein many hydroxy groups in the PC/G composite cathode can be converted into redox-active carbonyl groups at the initial discharge-charge. This composite cathode can deliver a high specific capacity of 355 mAh g^-1 at 0.1 C and a specific capacity of 171 mAh g^-1 at 10 C. Moreover, the composite cathode can retain 74.4 % of its initial capacity after 3000 discharge-charge cycles at 2 C. This coordination route to zinc ions within the PC/G composite cathode can avoid the destruction of the cathode material during discharge-charge. This organic cathode shows great promise for reversible zinc-ion storage, bringing aqueous zinc-ion batteries a step closer to future practical applications.

Expanding the DOPA Universe with Genetically Encoded, Mussel-Inspired Bioadhesives for Material Sciences and Medicine

Catechols are a biologically relevant group of aromatic diols that have attracted much attention as mediators of adhesion of "bio-glue" proteins in mussels of the genus Mytilus. These organisms use catechols in the form of the noncanonical amino acid l-3,4-dihydroxyphenylalanine (DOPA) as a building block for adhesion proteins. The DOPA is generated post-translationally from tyrosine. Herein, we review the properties, natural occurrence, and reactivity of catechols in the design of bioinspired materials. We also provide a basic description of the mussel's attachment apparatus, the interplay between its different molecules that play a crucial role in adhesion, and the role of post-translational modifications (PTMs) of these proteins. Our focus is on the microbial production of mussel foot proteins with the aid of orthogonal translation systems (OTSs) and the use of genetic code engineering to solve some fundamental problems in the bioproduction of these bioadhesives and to expand their chemical space. The major limitation of bacterial expression systems is their intrinsic inability to introduce PTMs. OTSs have the potential to overcome these challenges by replacing canonical amino acids with noncanonical ones. In this way, PTM steps are circumvented while the genetically programmed precision of protein sequences is preserved. In addition, OTSs should enable spatiotemporal control over the complex adhesion process, because the catechol function can be masked by suitable chemical protection. Such caged residues can then be noninvasively unmasked by, for example, UV irradiation or thermal treatment. All of these features make OTSs based on genetic code engineering in reprogrammed microbial strains new and promising tools in bioinspired materials science.

Trisulfide-Bond Acenes for Organic Batteries

The molecular design of organic battery electrodes is a big challenge. Here, we synthesize two metal-free organosulfur acenes and shed insight into battery properties using first-principles calculations. A new zone-melting chemical-vapor-transport (ZM-CVT) apparatus was fabricated to provide a simple, solvent-free, and continuous synthetic protocol, and produce single crystals of tetrathiotetracene (TTT) and hexathiapentacene (HTP) at a large scale. Single crystals of HTP showed better Li-ion battery performance and higher cycling stability than those of TTT. A two-step, three-electron lithiation mechanism instead of the commonly depicted two-electron mechanism is proposed for the HTP Li-ion battery. The superior performance of HTP is linked to unique trisulfide bonding scenarios, which are also responsible for the formation of empty channels along the stacking direction. In-depth theoretical analysis suggests that organosulfur acenes are potential prototypes for organic battery materials with tunable properties, and that the tuning of sulfur bonds is critical in designing these new materials.

Melanin: A Greener Route To Enhance Energy Storage under Solar Light

The development of technologies integrating solar energy conversion and energy storage functions is critical for limiting the anthropogenic effects on climate change and preventing possible energy shortages related to the increase of the world population. In our work, we explored the possibility to integrate the conversion and storage functions within the same multifunctional biosourced material. We identified the redox-active, quinone-based, melanin pigment, featuring a broadband absorption in the UV-vis region, as the ideal candidate for such an exploration. Electrodes of melanin on carbon paper were investigated for their morphological, optical, and voltammetric characteristics prior to being assembled into symmetric supercapacitors operating in aqueous electrolytes. We observed that, under solar light, the capacity and capacitance of melanin electrodes significantly increase with respect to the dark conditions (by 22 and 39%, respectively). Once in a supercapacitor configuration, besides featuring a Coulombic efficiency close to 100% after 5000 cycles, the capacitance and capacity of the electrodes, rated by the initial values, improve after prolonged illumination, as it is the case for the energy and power density.

A Crystalline, 2D Polyarylimide Cathode for Ultrastable and Ultrafast Li Storage

Organic electrode materials are of long-standing interest for next-generation sustainable lithium-ion batteries (LIBs). As a promising cathode candidate, imide compounds have attracted extensive attention due to their low cost, high theoretical capacity, high working voltage, and fast redox reaction. However, the redox active site utilization of imide electrodes remains challenging for them to fulfill their potential applications. Herein, the synthesis of a highly stable, crystalline 2D polyarylimide (2D-PAI) integrated with carbon nanotube (CNT) is demonstrated for the use as cathode material in LIBs. The synthesized polyarylimide hybrid (2D-PAI@CNT) is featured with abundant π-conjugated redox-active naphthalene diimide units, a robust cyclic imide linkage, high surface area, and well-defined accessible pores, which render the efficient utilization of redox active sites (82.9%), excellent structural stability, and fast ion diffusion. As a consequence, high rate capability and ultrastable cycle stability (100% capacity retention after 8000 cycles) are achieved in the 2D-PAI@CNT cathode, which far exceeds the state-of-the-art polyimide electrodes. This work may inspire the development of novel organic electrodes for sustainable and durable rechargeable batteries.

Polypyrrole-Modified Prussian Blue Cathode Material for Potassium Ion Batteries via In Situ Polymerization Coating

Potassium-ion batteries (PIBs) have received significant attention because of the abundant potassium reserves and similar electrochemistry of potassium to that of lithium. Because of the open framework and structural controllability, Prussian blue and its analogues (PB) are considered to be competitive cathodes of PIBs. However, the intrinsic lattice defects and poor electronic conductivity of PBs induce poor cycling performance and rate capability. Herein, we propose a polypyrrole-modified Prussian blue material (KHCF@PPy) via an in situ polymerization coating method for the first time. KHCF@PPy possesses a low defect concentration and improved electronic conductivity, and the electrode was found to exhibit 88.9 mA h g^-1 discharge capacity at 50 mA g^-1, with 86.8% capacity retention after 500 cycles. At a higher current density of 1000 mA g^-1, the initial discharge capacity was 72.1 mA h g^-1, which dropped slightly to 61.8 mA h g^-1 after 500 cycles. The capacity decay rate was 0.03% per cycle. Detailed characterization showed a lack of phase transition during the charge and discharge processes and determined that K ions were not completely extracted from the monoclinic structure, possibly contributing to the excellent cycling stability. This simple surface modification method represents a promising means of mitigating issues currently associated with PB-based cathodes for PIBs.

Flexible Graphene/Carbon Nanotube Electrochemical Double-Layer Capacitors with Ultrahigh Areal Performance

The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/carbon nanotubes hybrid EDLCs. The wet-jet milling (WJM) method is exploited to exfoliate the graphite into single-few-layer graphene flakes (WJM-G) in industrial volumes (production rate ca. 0.5 kg/day). Commercial single-/double-walled carbon nanotubes (SDWCNTs) are mixed with graphene flakes in order to act as spacers between the flakes during their film formation. The WJM-G/SDWCNTs films are obtained by one-step vacuum filtration of the material dispersions, resulting in self-standing, metal- and binder-free flexible EDLC electrodes with high active material mass loadings up to around 30 mg cm^-2 . The corresponding symmetric WJM-G/SDWCNTs EDLCs exhibit electrode energy densities of 539 μWh cm^-2 at 1.3 mW cm^-2 and operating power densities up to 532 mW cm^-2 (outperforming most of the reported EDLC technologies). The EDCLs show excellent cycling stability and outstanding flexibility even in highly folded states (up to 180°).

Highly Stable and High Rate-Performance Na-Ion Batteries Using Polyanionic Anthraquinone as the Organic Cathode

Sodium 9,10-anthraquinone-2,6-disulfonate (Na₂ AQ26DS), with polyanionic character and two O-Na ionic bonds, is found to be a highly stable organic cathode in Na-ion batteries, delivering capacities of approximately 120 mAh g^-1 for 300 cycles (50 mA g^-1 ) and around 99 mAh g^-1 for 1000 cycles (1 A g^-1 ). These results are the best performance reported to date for small-molecule, anthraquinone-based organic cathodes in Li-, Na-, or K-ion batteries.

Fused Aromatic Network Structures as a Platform for Efficient Electrocatalysis

Fused aromatic network (FAN) structures are a category of ordered porous polymers that permit the specific fusion of building blocks into extended porous network structures with designed skeletons and pores. One significant feature of FANs is that their structures can be tailorable with fused aromatic rings without rotatable single-bond connectivity. As a result, the geometry and space orientation of the building blocks are easily incorporated to guide the topological expansion of the architectural periodicity. The variety of building units and fused linkages make FANs a promising materials platform for constitutional outline and functional design. The stably confined spaces of FAN architectures can be extended for the exchange of photons, ions, electrons, holes, and guest molecules, and exhibit customized chemical, electrochemical and optical properties. Herein, the main progress and advances in the field of 2D and 3D FANs and their utilization as a platform to develop efficient electrocatalysts for energy conversion and storage applications are summarized.

Anthraquinone-Based Oligomer as a Long Cycle-Life Organic Electrode Material for Use in Rechargeable Batteries

An anthraquinone (AQ)-based dimer and trimer linked by a triple bond (-C≡C-) were newly synthesized as active materials for the positive electrode of rechargeable lithium batteries. These synthesized oligomers exhibited an initial discharge capacity of about 200 mAh g^-1 with an average voltage of 2.2-2.3 V versus Li_(C.E.) . These capacity values are similar to that of the AQ-monomer, reflecting the two-electron transfer redox per AQ unit. Regarding their cycling stability, the capacity of the monomer electrode quickly decreased; however, the electrodes of the prepared oligomers showed an improved cycling performance. In particular, the discharge capacities of the trimer remained almost constant for 100 cycles. A theoretical calculation revealed that the intermolecular binding energy can be increased to the level of a weak covalent bonding by oligomerization, which would be beneficial to suppress the dissolution of the organic active materials into the electrolyte solutions. These results show that the cycle-life of organic active materials can be extended without lowering the discharge capacity by the oligomerization of the redox active molecule unit.

Biomimetic Straw-Like Bundle Cobalt-Doped Fe2 O3 Electrodes towards Superior Lithium-Ion Storage

Biomimetic straw-like bundles of Co-doped Fe₂ O₃ (SCF), with Co²⁺ incorporated into the lattice of α-Fe₂ O₃ , was fabricated through a cost-effective hydrothermal process and used as the anode material for lithium-ion batteries (LIBs). The SCF exhibited ultrahigh initial discharge specific capacity (1760.7 mA h^-1  g^-1 at 200 mA g^-1 ) and cycling stability (with the capacity retention of 1268.3 mA h^-1  g^-1 after 350 cycles at 200 mA g^-1 ). In addition, a superior rate capacity of 376.1 mA h^-1  g^-1 was obtained at a high current density of 4000 mA g^-1 . The remarkable electrochemical lithium storage of SCF is attributed to the Co-doping, which increases the unit cell volume and affects the whole structure. It makes the Li⁺ insertion-extraction process more flexible. Meanwhile, the distinctive straw-like bundle structure can accelerate Li ion diffusion and alleviate the huge volume expansion upon cycling.

Achieving of High Density/Utilization of Active Groups via Synergic Integration of C=N and C=O Bonds for Ultra-Stable and High-Rate Lithium-Ion Batteries

Organic electrode materials are receiving ever-increasing research interest due to their combined advantages, including resource renewability, low cost, and environmental friendliness. However, their practical applications are still terribly plagued by low conductivity, poor rate capability, solubility in electrolyte, and low density/utilization of active groups. In response, herein, as a proof-of-concept experiment, C=N and C=O bonds are synergically integrated into the backbone of pentacene to finely tune the electronic structures of pentacene. Unexpectedly, the firstly obtained unique 5,7,11,14-tetraaza-6,13-pentacenequinone/reduced graphene oxide (TAPQ/RGO) composite exhibits superior electrochemical performances, including an ultra-stable cycling stability (up to 2400 cycles) and good rate capability (174 mAh g⁻¹ even at a high current density of 3.2 A g⁻¹), which might be attributed to the abundant active groups, π-conjugated molecular structure, leaf-like morphology, and the interaction between TAPQ and graphene.

Neuron-Inspired Design of High-Performance Electrode Materials for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) are generally considered as promising cheap alternatives of lithium-ion batteries for stationary renewable energy storage and have received increasing attention in recent years. The exploration of anode materials with efficient electron transportation is essential for improving the performance of SIBs. Inspired by the signal transfer mode of a neuron, we designed a composite by stringing MoS₂ nanoflower (soma) with multiwall carbon nanotubes (MWCNTs) (axons). High-resolution TEM observation reveals a lattice matching growth mechanism of MoS₂ nanosheets on the interface of MWCNTs and the lattice expansion of the (002) plane of MoS₂. The lattice matching among the MoS₂ nanosheet and MWCNT could facilitate electron transfer and structure maintenance upon cycling. The expanded distance of the (002) plane of MoS₂ would also promote the sodium-ion intercalation/deintercalation kinetics of the composite. Benefiting from the structural features, when used as an anode material for SIBs, the composite exhibits excellent electrochemical performance, including high specific capacity, excellent cycle stability, and superior rate capabilities. A stable capacity of 527.7 mAh g^-1 can be achieved after 110 cycles at a current density of 100 mA g^-1. The neuron-inspired design proposed is a promising and efficient strategy for the development of electrode materials for SIBs with high mass transport kinetics and structural stability.

Organic Carbonyl Compounds for Sodium-Ion Batteries: Recent Progress and Future Perspectives

Sodium-organic batteries, which use organic materials as the electrodes in sodium-ion batteries, are an attractive alternative to conventional lithium-ion batteries for next-generation sustainable and versatile energy storage devices owing to the abundant sodium resources and environmental friendly features. However, organics used in sodium-ion batteries also encounter some issues such as low redox potential, high solubility in the electrolyte, and low conductivity. In response, altering the aromatic system/attaching electron-withdrawing groups, constructing polymers, and incorporating a conductive matrix are effective strategies. This review summarizes and briefly discusses recent organic carbonyl compounds for sodium-organic batteries from the viewpoint of function-oriented design, including function evolution from small-molecule compounds to polymers, then composites, and finally flexible electrodes. In particular, as a timely overview, carbonyl-based organic flexible electrodes for sodium-organic batteries are also highlighted for the first time.

Recent Progress in Polymeric Carbonyl-Based Electrode Materials for Lithium and Sodium Ion Batteries

Advancement in mobile electronics is driving progress in lithium ion batteries. Recently, organic electrode materials have emerged as promising candidates for lithium ion batteries due to their high theoretical capacity, ease of synthesis, versatility of structure, and abundance. Polymerization is a strategy used to overcome the issues associated with small organic molecules for charge storage application. The focus of this review is on the most recent progress in the field of polymeric carbonyl materials for lithium ion batteries (LIBs) and sodium ion batteries (SIBs). Advantages of organic electrode materials, device architecture, and charge storage mechanism are discussed. Challenges associated with carbonyl-based electrodes and some recent solutions are outlined. Later, a comparison of theoretical capacity, practical capacity, and cyclic life are presented for different carbonyl systems. Capacity-fading phenomena and structural degradation during charging are discussed where necessary. Some key parameters for the design of flexible batteries are highlighted and an overview of some recent contributions of our group in this field are reported. Finally, some future prospects for researchers in this field are outlined.

Superlithiated Polydopamine Derivative for High-Capacity and High-Rate Anode for Lithium-Ion Batteries

Organic electrode materials, with low-cost synthesis and environmental friendliness, have gained significant research interest in lithium-ion batteries (LIBs). Polydopamine (PDA), as a bioderived organic electrode material, exhibits a low capacity of ∼100 mAh g^-1, greatly limiting the practical application in LIBs. In this work, we find that a simple heat treatment at 300 °C can endow PDA-derived material (PDA300) with superior electrochemical performance. The obtained PDA300 electrode exhibits an ultrahigh capacity of 977 mAh g^-1 at 50 mA g^-1. Further combining the PDA300 with highly conductive Ti₃C₂T _x MXene, the obtained PDA300/Ti₃C₂T _x composite is demonstrated by high capacity (1190 mAh g^-1, 50 mA g^-1), excellent rate capability (remaining 552 mAh g^-1 at 5 A g^-1), and good cycling stability (82% retaining after 1000 cycles). The outstanding lithium storage performance is highly associated with the superlithiation process of the unsaturated carbon-carbon bonds in the PDA derivative and the introduction of the highly conductive Ti₃C₂T _x substrate with a unique two-dimensional nanostructure. This work will provide new opportunities for the expansion of high-performance organic anodes for LIBs.

Recent Progress in Organic Electrodes for Li and Na Rechargeable Batteries

Organic rechargeable batteries, which use organics as electrodes, are excellent candidates for next-generation energy storage systems because they offer design flexibility due to the rich chemistry of organics while being eco-friendly and potentially cost efficient. However, their widespread usage is limited by intrinsic problems such as poor electronic conductivity, easy dissolution into liquid electrolytes, and low volumetric energy density. New types of organic electrode materials with various redox centers or molecular structures have been developed over the past few decades. Moreover, research aimed at enhancing electrochemical properties via chemical tuning has been at the forefront of organic rechargeable batteries research in recent years, leading to significant progress in their performance. Here, an overview of the current developments of organic rechargeable batteries is presented, with a brief history of research in this field. Various strategies for improving organic electrode materials are discussed with respect to tuning intrinsic properties of organics using molecular modification and optimizing their properties at the electrode level. A comprehensive understanding of the progress in organic electrode materials is provided along with the fundamental science governing their performance in rechargeable batteries thus a guide is presented to the optimal design strategies to improve the electrochemical performance for next-generation battery systems.

One-Dimensional Integrated MnS@Carbon Nanoreactors Hybrid: An Alternative Anode for Full-Cell Li-Ion and Na-Ion Batteries

Manganese sulfide (MnS) has triggered great interest as an anode material for rechargeable Li-ion/Na-ion batteries (LIBs/SIBs) because of its low cost, high electrochemical activity, and theoretical capacity. Nevertheless, the practical application is greatly hindered by its rapid capacity decay lead by inevitable active dissolutions and volume expansions in charge/discharge cycles. To resolve the above issues in LIBs/SIBs, we herein put forward the smart construction of MnS nanowires embedded in carbon nanoreactors (MnS@C NWs) via a facile solution method followed by a scalable in situ sulfuration treatment. This engineering protocol toward electrode architectures/configurations endows integrated MnS@C NWs anodes with large specific capacity (with a maximum value of 847 mA h g^-1 in LIBs and 720 mA h g^-1 in SIBs), good operation stability, excellent rate capabilities, and prolonged cyclic life span. To prove their potential real applications, we have established the full cells (for LIBs, MnS@C//LiFePO₄; for SIBs, MnS@C//Na₃V₂(PO₄)₃), both of which are capable of showing remarkable specific capacities, outstanding rate performance, and superb cyclic endurance. This work offers a scalable, simple, and efficient evolution method to produce the integrated hybrid of MnS@C NWs, providing useful inspiration/guidelines for anodic applications of metal sulfides in next-generation power sources.

In Situ Polymerization of Dopamine on Graphene Framework for Charge Storage Applications

Polydopamine, a functional coating material, is redox active as cathode materials for both Li- and Na-ion batteries or hybrid capacitors. Here, a polydopamine coating onto 3D graphene framework is introduced through a simple hydrothermal process, during which graphene oxide serves not only as an oxidant for assisting the polymerization of dopamine, but also as a template for the conformal growth of polydopamine. High-density films are fabricated by compressing the polydopamine-coated graphene aerogels, which can be directly used as free-standing and flexible cathodes in both Li- and Na-cells. The compact electrodes deliver high capacities of ≈230 mAh g^-1 in Li-cells and ≈211 mAh g^-1 in Na-cells based on the total mass of electrodes. These compact electrodes also exhibit exceptional cycling stability and high rate performance due to the unique structure in which polydopamine is uniformly coated on the 3D structured graphene.

Capacity detection of electric vehicle lithium-ion batteries based on X-ray computed tomography

It is difficult to use conventional capacity detection methods to determine nondestructively and rapidly the capacity of lithium-ion (Li-ion) batteries used in electric vehicles. To resolve this problem, lithium iron phosphate (LFP) batteries are regarded as research objects for studying the relationship between their electrochemical performances and the structural parameters of their active materials based on Faraday's law. Therefore, a capacity detection method based on X-ray computed tomography is proposed; it combines the battery's electrochemical performance testing techniques and tomographic measurement techniques to measure the electrochemical properties and structural parameters of active materials of Li-ion batteries. The results show that (1) the capacity of a Li-ion battery is a function of the structural parameters of active materials and working condition; (2) the influence of the working condition on the capacity gradually changes with the change in the structural parameters of the active material; and (3) the loss of strong active materials of a Li-ion battery in the negative cross-section is more than that in the positive cross-section when the capacity decays. Owing to its advantages of being nondestructive and rapid, this method is superior compared with conventional methods.

It is difficult to use conventional capacity detection methods to determine nondestructively and rapidly the capacity of lithium-ion (Li-ion) batteries used in electric vehicles.

Pistachio-Shuck-Like MoSe2 /C Core/Shell Nanostructures for High-Performance Potassium-Ion Storage

Potassium-ion batteries (KIBs) have recently attracted intensive attention because of the abundant potassium resources and their low cost and high safety. However, the major challenge faced by KIBs lies in the lack of stable and high-capacity materials for the intercalation/deintercalation of large-size potassium ions. A unique pistachio-shuck-like MoSe₂ /C core/shell nanostructure (PMC) is synthesized herein as an advanced anode for boosting the performance of KIBs. This PMC is featured with a few layers of molybdenum selenide as the core with an expanded interlayer spacing of ≈0.85 nm, facilitating the intercalation/deintercalation of K ions, and a thin amorphous carbon as the shell, which can confine the active molybdenum selenide nanosheets during cycling for maintaining the high structural stability. Most importantly, as a whole, the PMC has the advantages of reducing the surplus hollow interior space for improving its packing density and buffering the volume expansion during the K-ion intercalation for further enhancing the stability. As a consequence, the PMC shows a very high capacity of 322 mAh g^-1 at 0.2 A g^-1 over 100 cycles, and can still remain 226 mAh g^-1 at 1.0 A g^-1 for a long period of 1000 cycles, which is among the best-reported KIBs anodes.

Multidimensional Evolution of Carbon Structures Underpinned by Temperature-Induced Intermediate of Chloride for Sodium-Ion Batteries

Different dimensions of carbon materials with various features have captured numerous interests due to their applications on the tremendous fields. Restricted by the raw materials and devices, the controlling of their morphology is a major challenge. Utilizing the catalytic features of the intermediates from the low-cost salts and polymerization of 0D carbon quantum dots (CQDs), 0D CQDs are expected to self-assemble into 1/2/3D carbon structures with the assistance of temperature-induced intermediates (e.g., ZnO, Ni, and Cu) from the salts (ZnCl2, NiCl2, and CuCl). The formation mechanisms are illustrated as follows: 1) the "orient induction" to evoke "vine style" growth mechanism of ZnO; 2) the "dissolution-precipitation" of Ni; and 3) the "surface adsorption self-limited" of Cu. Subsequently, the degree of graphitization, interlayer distance, and special surface area are investigated in detail. 1D structure from 700 °C as anode displays a high Na-storage capacity of 301.2 mAh g-1 at 0.1 A g-1 after 200 cycles and 107 mAh g-1 at 5.0 A g-1 after 5000 cycles. Quantitative kinetics analysis confirms the fundamentals of the enhanced rate capacity and the potential region of Na-insertion/extraction. This elaborate work opens up an avenue toward the design of carbon with multidimensions and in-depth understanding of their sodium-storage features.