Lewis Acid Decorated Hexacyanodiborane(6) Dianion

First examples of diborane(6) dianions decorated with weakly coordination B(C6F5)3 (BCF) groups and SiEt3 + moieties have been synthesized demonstrating the synthetic potential of the [B2(CN)6]2- dianion. [B2{CNB(C6F5)3}6]2- (1) was isolated as potassium and tetrabutylammonium salt. 1 is a rare example for a weakly coordinating dianion and it was used for the stabilization of the carbocation [Ph3C]+ and the oxonium acid [H(OEt2)2]+. Reaction of [Ph3C]21 with HSiEt3 resulted in the silylated neutral diborane(6) [B2{CNB(C6F5)3}4(CNSiEt3)2] (2) in which two BCF groups have been selectively replaced by SiEt3 + substituents, underscoring the stability and chemical versatility of the [B2(CN)6]2- dianion. The chemical properties and physicochemical data of 1 and 2 provide insight into electronic, coordinating, and steric properties of theses novel diborane(6) compounds.

Alkylcyanoborate Anions: Building Blocks for Fluorine-Free Low-Viscosity, Electrochemically and Thermally Stable Ionic Liquids

A set of mixed-substituted potassium alkylcyano- and alkylcyanofluoroborates has been synthesized using easily accessible starting compounds and characterized by elemental analysis, NMR and vibrational spectroscopy, and mass spectrometry. In addition, single-crystal structures of salts of the cyanoborate anions have been derived from X-ray diffraction experiments. The 1-ethyl-3-methylimidazolium room temperature ionic liquids ([EMIm]+ -RTILs) with the new borate anions have been synthesized and their physicochemical properties, that is, high thermal and electrochemical stability, low viscosity, and high conductivity, have been compared to the properties of related [EMIm]+ -RTILs. The influence of the different alkyl substituents at boron has been assessed. The exemplary study on the properties with the [EMIm]+ -ILs with the mixed water stable alkylcyanoborate anions points towards the potential of these fluorine-free borate anions, in general.

Cyano(fluoro)borate and cyano(hydrido)borate ionic liquids: low-viscosity ionic media for electrochemical applications

The synthesis and detailed characterization of low-viscosity room-temperature ionic liquids (RTILs) and [BnPh₃P]⁺ salts with the cyano(fluoro)borate anions [BF(CN)₃]^- (MFB), [BF₂(CN)₂]^- (DFB), and [BF₃(CN)]^- as well as the new mixed-substituted anion [BFH(CN)₂]^- (FHB) is described. The RTILs with [EMIm]⁺ or [BMPL]⁺ as countercations were obtained in yields of up to 98% from readily available alkali metal salts and in high purities that allow application in electrochemical devices. Trends in thermal stability, melting and freezing behavior, density, electrochemical stability, dynamic viscosity, specific conductivity and ion diffusivity have been assessed and compared to those of the related tetracyanoborate- and cyano(hydrido)borate-RTILs. The crystal structure analysis of the [BnPh₃P]⁺ salts of [BF_n(CN)_4-n]^- (n = 0-4), [BH_n(CN)_4-n]^- (n = 1-3) and [BFH(CN)₂]^- provided experimental access to anion volumina that together with ion molecular mass, electrostatic potential, shape and chemical stability have been correlated to physicochemical properties. In addition, the cytotoxicity of the [EMIm]⁺-ILs and potassium or sodium salts was studied.

Tricyanoborane-Functionalized Anionic N-Heterocyclic Carbenes: Adjustment of Charge and Stereo-Electronic Properties

The 1-methyl-3-(tricyanoborane)imidazolin-2-ylidenate anion (2) was obtained in high yield by deprotonation of the B(CN)3 -methylimidazole adduct 1. Regarding charge and stereo-electronic properties, anion 2 closes the gap between well-known neutral NHCs and the ditopic dianionic NHC, the 1,3-bis(tricyanoborane)imidazolin-2-ylidenate dianion (IIb). The influence of the number of N-bonded tricyanoborane moieties on the σ-donating and π-accepting properties of NHCs was assessed by quantum chemical calculations and verified by experimental data on 2, IIb, and 1,3-dimethylimidazolin-2-ylidene (IMe, IIa). Therefore NHC 2, which acts as a ditopic ligand via the carbene center and the cyano groups, was reacted with alkyl iodides, selenium, and [Ni(CO)4 ] yielding alkylated imidazoles 3 and 4, the anionic selenium adduct 5, and the anionic nickel tricarbonyl complex 8, respectively. The results of this study prove that charge, number of coordination sites, buried volume (%Vbur ) and σ-donor and π-acceptor abilities of NHCs can be effectively fine-tuned via the number of tricyanoborane substituents.

Dismutation of Tricyanoboryllead Compounds: The Homoleptic Tetrakis(tricyanoboryl)plumbate Tetraanion

A series of unprecedently air-stable (tricyanoboryl)plumbate anions was obtained by the reaction of the boron-centered nucleophile B(CN)3 2- with triorganyllead halides. Salts of the anions [R3 PbB(CN)3 ]- (R=Ph, Et) were isolated and found to be stable in air at room temperature. In the case of Me3 PbHal (Hal=Cl, Br), a mixture of the anions [Me4-n Pb{B(CN)3 }n ]n- (n=1, 2) was obtained. The [Et3 PbB(CN)3 ]- ion undergoes stepwise dismutation in aqueous solution to yield the plumbate anions [Et4-n Pb{B(CN)3 }n ]n- (n=1-4) and PbEt4 as by-product. The reaction rate increases with decreasing pH value of the aqueous solution or by bubbling O2 through the reaction mixture. Adjustment of the conditions allowed the selective formation and isolation of salts of all anions of the series [Et4-n Pb{B(CN)3 }n ]n- (n=2-4) including the homoleptic tetraanion [Pb{B(CN)3 }4 ]4- .

1,3-Bis(tricyanoborane)imidazoline-2-ylidenate Anion-A Ditopic Dianionic N-Heterocyclic Carbene Ligand

The 1,3-bis(tricyanoborane)imidazolate anion 1 was obtained in high yield from lithium imidazolate and B(CN)3 -pyridine adduct. Anion 1 is chemically very robust and thus allowed the isolation of the corresponding H5 O2 + salt. Furthermore, monoanion 1 served as starting species for the novel dianionic N-heterocyclic carbene (NHC), 1,3-bis(tricyanoborane)imidazoline-2-ylidenate anion 3 that acts as ditopic ligand via the carbene center and the cyano groups at boron. First reactions of this new NHC 3 with methyl iodide, elemental selenium, and [Ni(CO)4 ] led to the methylated imidazolate ion 4, the dianionic selenium adduct 5, and the dianionic nickel tricarbonyl complex 6. These NHC derivatives provide a first insight into the electronic and steric properties of the dianionic NHC 3. Especially the combination of properties, such as double negative charge, different coordination sites, large buried volume and good σ-donor and π-acceptor ability, make NHC 3 a unique and promising ligand and building block.

Boron- versus Nitrogen-Centered Nucleophilic Reactivity of (Cyano)hydroboryl Anions: Synthesis of Cyano(hydro)organoboranes and 2-Aza-1,4-diborabutatrienes

Cyclic alkyl(amino)carbene-stabilized (cyano)hydroboryl anions were synthesized by deprotonation of (cyano)dihydroborane precursors. While they display boron-centered nucleophilic reactivity towards organohalides, generating fully unsymmetrically substituted cyano(hydro)organoboranes, they show cyano-nitrogen-centered nucleophilic reactivity towards haloboranes, resulting in the formation of hitherto unknown linear 2-aza-1,4-diborabutatrienes.

Innovative Syntheses of Cyano(fluoro)borates: Catalytic Cyanation, Electrochemical and Electrophilic Fluorination

Different types of high-yield, easily scalable syntheses for cyano(fluoro)borates Kt[BFn (CN)4-n ] (n=0-2) (Kt=cation), which are versatile building blocks for materials applications and chemical synthesis, have been developed. Tetrafluoroborates react with trimethylsilyl cyanide in the presence of metal-free Brønsted or Lewis acid catalysts under unprecedentedly mild conditions to give tricyanofluoroborates or tetracyanoborates. Analogously, pentafluoroethyltrifluoroborates are converted into pentafluoroethyltricyanoborates. Boron trifluoride etherate, alkali metal salts, and trimethylsilyl cyanide selectively yield dicyanodifluoroborates or tricyanofluoroborates. Fluorination of cyanohydridoborates is the third reaction type that includes direct fluorination with, for example, elemental fluorine, stepwise halogenation/fluorination reactions, and electrochemical fluorination (ECF) according to the Simons process. In addition, fluorination of [BH(CN)2 {OC(O)Et}]- to result in [BF(CN)2 {OC(O)Et}]- is described.

Hydroxytricyanoborate Anion: Synthetic Aspects and Structural, Chemical, and Spectroscopic Properties

In recent years, salts of the hydridotricyanoborate anion [BH(CN)₃]^- (MHB) have become readily available. In spite of the unusually high stability of the MHB anion, it can be used as a valuable starting material for the preparation of selected tricyanoborates, for example, the boron-centered nucleophile B(CN)₃^2-. A further unprecedented example is the hydroxytricyanoborate anion [B(OH)(CN)₃]^- that is accessible by oxidation of (H₃O)MHB with elemental bromine in water. The Brønsted acid (H₃O)[B(OH)(CN)₃] was isolated as a crystalline solid. It serves as a versatile starting material for the synthesis of coordination compounds, metal salts, and ionic liquids. The [B(OH)(CN)₃]^- anion shows a rich coordination chemistry and a high tendency to form hydrogen-bonded motifs as demonstrated by a series of salts with different types of cations. Furthermore, the [B(OH)(CN)₃]^- anion itself serves as starting material for new tricyanoborates such as the unusual trianion [B{OB(CN)₃}₃]^3- and the silylated anions [B(OSiR₃)(CN)₃]^- (R = Me, Et, Ph). Some of these follow-up products have been characterized by single-crystal X-ray diffraction, e.g., [nBu₄N]₃[B{OB(CN)₃}₃] and [nBu₄N][B(OSiPh₃)(CN)₃].

Pentafluoroethylated Compounds of Silicon, Germanium and Tin

In this contribution we present an account on pentafluoroethylated compounds of silicon, germanium and tin. The pronounced electron-withdrawing effect of the pentafluoroethyl group leads to a markedly increased Lewis acidity at the central atom which results in the stabilization of hypervalent complexes, anionic element(II) species as well as remarkable reactivities of element-element and element-hydrogen bonds. By addition to unsaturated C-C bonds or by reaction with organic halides as well as transition-metal complexes the molecules bearing a pentafluoroethyl-element group are readily accessible. Moreover, the utilization of pentafluoroethyl groups facilitates the formation of donor-stabilized germylenes and stannylenes. A series of such compounds serves as suitable pentafluoroethylation reagents. Conversely to the well-studied trifluoromethyl derivatives these compounds frequently exhibit a higher thermostability, which allows a more convenient handling.

An Anionic Aluminium Nucleophile

The first stable anionic aluminium nucleophile was isolated by Goicoechea, Aldridge and co-workers. The aluminyl compound showed very high reactivity in metathesis reactions as well as in the oxidative addition of substrates such as dihydrogen and benzene, which opens up new perspectives in main group chemistry.

Perfluoroalkyltricyanoborate and Perfluoroalkylcyanofluoroborate Anions: Building Blocks for Low-Viscosity Ionic Liquids

The potassium perfluoroalkyltricyanoborates K[C_n F_2 n+1 B(CN)₃ ] [n=1 (1 d), 2 (2 d)] and the potassium mono(perfluoroalkyl)cyanofluoroborates K[C_n F_2 n+1 BF(CN)₂ ] [n=1 (1 c), 2 (2 c)] and [C_n F_2 n+1 BF₂ (CN)]^- [n=1 (1 b), 2 (2 b), 3 (3 b), 4 (4 b)] are accessible with perfect selectivities on multi-gram scales starting from K[C_n F_2 n+1 BF₃ ] and Me₃ SiCN. The K⁺ salts are starting materials for the preparation of salts with organic cations, for example, [EMIm]⁺ (EMIm=1-ethyl-3-methylimidazolium). These [EMIm]⁺ salts are hydrophobic room-temperature ionic liquids (RTILs) that are thermally, chemically and electrochemically very robust, offering electrochemical windows up to 5.8 V. The RTILs described herein, exhibit very low viscosities with a minimum of 14.0 mPa s at 20 °C for [EMIm]1 c, low melting points down to -57 °C for [EMIm]2 b and extraordinary high conductivities up to 17.6 mS cm^-1 at 20 °C for [EMIm]1 c. The combination of these properties makes these ILs promising materials for electrochemical devices as exemplified by the application of selected RTILs as component of electrolytes in dye-sensitised solar cells (DSSCs, Grätzel cells). The efficiency of the DSSCs was found to increase with a decreasing viscosity of the neat ionic liquid. In addition to the spectroscopic characterisation, single crystals of the potassium salts of the anions 1 b-d, 2 d, 3 b and 4 c as well as of [nBu₄ N]2 c have been studied by X-ray diffraction.

Borylenes: An Emerging Class of Compounds

Free borylenes (R-B:) have only been spectroscopically characterized in the gas phase or in matrices at very low temperatures. However, in recent years, a few mono- and bis(Lewis base)-stabilized borylenes have been isolated. In both of these compounds the boron atom is in the formal oxidation state +I which contrasts with classical organoboron derivatives wherein the element is in the +III oxidation state. Mono(Lewis base)-stabilized borylenes are isoelectronic with singlet carbenes, and their reactivity mimics to some extent that of transition metals. They can activate small molecules, such as H₂ , and coordinate an additional ligand; in other words, they are boron metallomimics. Bis(Lewis base)borylene adducts are isoelectronic with amines and phosphines. In contrast to boranes, which act as electron acceptors and thus Lewis acids, they are electron-rich and act as ligands for transition metals.