Fundamental aspects of nanocellulose stabilized Pickering emulsions and foams

Nanocelluloses in recent years have garnered a lot of attention for their use as stabilizers of liquid-liquid and gas-liquid interfaces. Both cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) have been used extensively in multiple studies to prepare emulsions and foams. However, there is limited literature available that systematically discusses the mechanisms that affect the ability of nanocelluloses (modified and unmodified) to stabilize different types of interfaces. This review briefly discusses key factors that affect the stability of Pickering emulsions and foams and provides a detailed and systematic analysis of the current state knowledge on factors affecting the stabilization of liquid-liquid and gas-liquid interfaces by nanocelluloses. The review also discusses the effect of nanocellulose surface modifications on mechanisms driving the Pickering stabilization of these interfaces.

Sustainable Superhydrophobic Surface with Tunable Nanoscale Hydrophilicity for Water Harvesting

Fog collection can be a sustainable solution to water scarcity in many regions around the world. Recently, great efforts have been undertaken to develop low-cost and highly efficient water collectors to address water shortages, especially in arid regions. However, the design of a scalable water harvesting surface remains elusive to the trade-off between water deposition and transport. Herein, we developed a hydrophilic/superhydrophobic surface using a "one-pot" facile approach to enable an efficient water deposition and transport process. Preferential exposure of hydrophilic cellulose nanocrystal outer surface could be used to accelerate droplet deposition, coupled with wax microspheres with distinct wetting features for the manipulation of the droplet mobility. Appropriate tuning of the wetting characteristics of the surfaces, optimizing the hydrophobicity and density of the water affinity nanodomains allowed us to enhance the water deposition rate without the sacrifice of water transport. An optimal hydrophilic/superhydrophobic topography through the control of nanoscale hydrophilic and hydrophobic domains yielded a water harvesting flux of 3.402 L/m 2 /h for a plate and 5.02 L/m 2 /h for a mesh. This strategy of decorating a superhydrophobic surface with moderately hydrophilic nanodomains allows the manipulation of droplet nucleation and removal to enhance the water collection efficiency.

Responsive Interfacial Assemblies Based on Charge-Transfer Interactions

Charge transfer (CT) interactions have been widely used to construct supramolecular systems, such as functional nanostructures and gels. However, to date, there is no report on the generation of CT complexes at the liquid-liquid interface. Here, by using an electron-deficient acceptor dissolved in water and an electron-rich donor dissolved in oil, we present the in situ formation and assembly of CT complex surfactants (CTCSs) at the oil-water interface. With time, CTCSs can assemble into higher-order nanofilms with exceptional mechanical properties, allowing the stabilization of liquids and offering the possibility to structure liquids into nonequilibrium shapes. Moreover, due to the redox-responsiveness of the electron-deficient acceptor, the association and dissociation of CTCSs can be reversibly manipulated in a redox process, leading to the switchable assembly and disassembly of the resultant constructs.

Molecular Brush Surfactants: Versatile Emulsifiers for Stabilizing and Structuring Liquids

Using amphiphilic molecular brushes to stabilize emulsions usually requires the synthesis of specific side chains, which can be a time-consuming and difficult challenge to meet. By taking advantage of the electrostatic interactions between water-soluble molecular brushes and oil-soluble oligomeric ligands, the in situ formation, assembly and jamming of molecular brush surfactants (MBSs) at the oil-water interface is described. With MBSs, stable emulsions including o/w, w/o and o/w/o can be easily prepared by varying the molar ratios of the molecular brushes to the ligands. Moreover, when jammed, the binding energy of MBSs at the interface is sufficiently strong to allow the stabilization of liquids in nonequilibrium shapes, i.e., structuring liquids, producing an elastic film at the interface with exceptional mechanical properties. These structured liquids have numerous potential applications, including chemical biphasic reactions, liquid electronics, and all-liquid biomimetic system.

Gated Molecular Diffusion at Liquid-Liquid Interfaces

The jamming of nanoparticle surfactants (NPSs) at liquid-liquid interface imparts attractive properties to the interfacial assemblies and enables the structuring of liquids. Herein, we report photoresponsive supramolecular microcapsules with jammed NPS assemblies at the oil-water interface, taking advantage of host-guest molecular recognition. The permeability of the colloidal membrane can be effectively manipulated by switching the NPSs from a jammed state to an unjammed state with a photo trigger, leading to a controlled molecular diffusion and release, affording a versatile platform for the construction of next generation smart microcapsule systems.

Rheological Aspects of Cellulose Nanomaterials: Governing Factors and Emerging Applications

Cellulose nanomaterials (CNMs), mainly including nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNCs), have attained enormous interest due to their sustainability, biodegradability, biocompatibility, nanoscale dimensions, large surface area, facile modification of surface chemistry, as well as unique optical, mechanical, and rheological performance. One of the most fascinating properties of CNMs is their aqueous suspension rheology, i.e., CNMs helping create viscous suspensions with the formation of percolation networks and chemical interactions (e.g., van der Waals forces, hydrogen bonding, electrostatic attraction/repulsion, and hydrophobic attraction). Under continuous shearing, CNMs in an aqueous suspension can align along the flow direction, producing shear-thinning behavior. At rest, CNM suspensions regain some of their initial structure immediately, allowing rapid recovery of rheological properties. These unique flow features enable CNMs to serve as rheological modifiers in a wide range of fluid-based applications. Herein, the dependence of the rheology of CNM suspensions on test protocols, CNM inherent properties, suspension environments, and postprocessing is systematically described. A critical overview of the recent progress on fluid applications of CNMs as rheology modifiers in some emerging industrial sectors is presented as well. Future perspectives in the field are outlined to guide further research and development in using CNMs as the next generation rheological modifiers.

Gel-Emulsion-Templated Polymeric Aerogels for Water Treatment by Organic Liquid Removal and Solar Vapor Generation

The importance of water cannot be overstated. It is the most important natural resource for our survival and development. The development of suitable materials for efficient water purification will provide a critical contribution for sustainable water use. In this context, a gel-emulsion-templated synthesis of a polymeric aerogel has been developed for water treatment. Owing to its hydrophobic nature, the aerogel shows high sorption (nearly 20 times its weight) for organic liquids, such as toluene, phenol, and nitrobenzene, and can be used to remove them from water. The aerogel shows low thermal conductivity (0.032 W m^-1  K^-1 ) and excellent light absorption efficiency (>92 %) after carbonization, which provides the possibility for the construction of an interfacial solar vapor generation system. The as-prepared materials are used to develop a two-step approach to remove both organic and inorganic contaminants (salts) from water. Importantly, the aerogel shows excellent reusability and high efficiency both for oil sorption and for solar vapor generation. Moreover, the low cost and easy scale-up of the preparation process lay a solid foundation for practical application. It is anticipated that the prepared aerogels would contribute not only to water purification but also to other related areas.

PDMS polymerized high internal phase emulsions (polyHIPEs) with closed-cell, aqueous-filled microcavities

Emulsion templates can produce a wide range of unique microstructures via solidification of the continuous phase. Some of these structures result in unique, fluid-filled composites reminiscent of biological tissue when the templating droplets develop into closed-cell structures. However, the state-of-the-art falls short in replicating the mechanical and functional response of biological structures due to stiff, fragile, and bio-incompatible materials while lacking systematic processing parameters. This article describes the synthesis of high internal phase, closed-cell, polydimethylsiloxane (PDMS) elastomeric foams which simultaneously achieve biocompatibility, mechanical robustness, flexibility, and selective permeability. Water-in-oil high internal phase emulsions (HIPEs) stabilized by silica nano-particles (SNPs) provide the microstructural template, resulting in a >74% by volume aqueous phase (up to 82%). To overcome the prohibitive barrier to HIPE formation when using a mechanically-superior, but highly viscous commercial PDMS kit, we produce HIPE templates via centrifugation of low internal phase emulsions (LIPEs, <30% by volume dispersed phase). This oil phase crosslinks into an aqueous-filled (water + glycerol + NaCl) elastomeric composite. The composite's microstructural dependence on viscosity ratio, mixing speed, emulsifier concentration, and centrifugal force are systematically characterized. The resulting microstructured, fluid-filled elastomer composites exhibit mechanically robust and highly flexible behavior due to the excellent properties of the PDMS continuous phase.

Self-Assembly of MXene-Surfactants at Liquid-Liquid Interfaces: From Structured Liquids to 3D Aerogels

2D transition metal carbides and nitrides (MXenes), a class of emerging nanomaterials with intriguing properties, have attracted significant attention in recent years. However, owing to the highly hydrophilic nature of MXene nanosheets, assembly strategies of MXene at liquid-liquid interfaces have been very limited and challenging. Herein, through the cooperative assembly of MXene and amine-functionalized polyhedral oligomeric silsesquioxane at the oil-water interface, we report the formation, assembly, and jamming of a new type MXene-based Janus-like nanoparticle surfactants, termed MXene-surfactants (MXSs), which can significantly enhance the interfacial activity of MXene nanosheets. More importantly, this simple assembly strategy opens a new platform for the fabrication of functional MXene assemblies from mesoscale (e.g., structured liquids) to macroscale (e.g., aerogels), that can be used for a range of applications, including nanocomposites, electronic devices, and all-liquid microfluidic devices.

Nanocrystals: A perspective on translational research and clinical studies

Poorly soluble small molecules typically pose translational hurdles owing to their low solubility, low bioavailability, and formulation challenges. Nanocrystallization is a versatile method for salvaging poorly soluble drugs with the added benefit of a carrier-free delivery system. In this review, we provide a comprehensive analysis of nanocrystals with emphasis on their clinical translation. Additionally, the review sheds light on clinically approved nanocrystal drug products as well as those in development.