Hyperpolarising Pyruvate through Signal Amplification by Reversible Exchange (SABRE)

Hyperpolarised [2-13C]-pyruvate by 13C SABRE in an acetone/water mixture

Signal Amplification By Reversible Exchange (SABRE) can provide strong signal enhancement (SE) to an array of molecules through reversible exchange of parahydrogen (pH2) derived hydrides and a suitable substrate coordinated to a transition metal. Among the substrates that can be used as a probe for hyperpolarised NMR and MRI, pyruvate has gained much attention. SABRE can hyperpolarise pyruvate in a low cost, fast, and reversible fashion that does not involve technologically demanding equipment. Most SABRE polarization studies have been done using methanol-d4 as a solvent, which is not suitable for in vivo application. The main goal of this work was to obtain hyperpolarized pyruvate in a solvent other than methanol which may open the door to further purification steps and enable a method to polarize pyruvate in water in future. This work demonstrates hyperpolarization of the [2-13C]pyruvate as well as [1-13C]pyruvate by SABRE in an acetone/water solvent system at room temperature as an alternative to methanol, which is commonly used. NMR signals are detected using a 1.1 T benchtop NMR spectrometer. In this work we have primarily focused on the study of [2-13C]pyruvate and investigated the effect of catalyst concentration, DMSO presence and water vs. acetone solvent concentration on the signal enhancement. The relaxation times for [2-13C]-pyruvate solutions are reported in the hope of informing the development of future purification methods.

Yeast Solutions and Hyperpolarization Enable Real-Time Observation of Metabolized Substrates Even at Natural Abundance

Metabolic changes in an organism often occur much earlier than macroscopic manifestations of disease, such as invasive tumors. Therefore, noninvasive tools to monitor metabolism are fundamental as they provide insights into in vivo biochemistry. NMR represents one of the gold standards for such insights by observing metabolites. Using nuclear spin hyperpolarization greatly increases the NMR sensitivity, enabling μmol/L sensitivity with a time resolution of about one second. However, a metabolic phantom with reproducible, rapid, and human-like metabolism is needed to progress research in this area. Using baker's yeast as a convenient metabolic factory, we demonstrated in a single study that yeast cells provide a robust and rapidly metabolizing phantom for pyruvate and fumarate, including substrates with a natural abundance of 13C: we observed the production of ethanol, carbon dioxide, bicarbonate, lactate, alanine from pyruvate, malate, and oxaloacetate from fumarate. For observation, we hyperpolarized pyruvate and fumarate via the dissolution dynamic nuclear polarization (dDNP) technique to about 30% 13C polarization that is equivalent to 360,000 signal enhancement at 1 T and 310 K. Major metabolic pathways were observed using tracers at a natural abundance of 13C, demonstrating that isotope labeling is not always essential in vitro. Enriched [1-13C]pyruvate revealed minor lactate production, presumably via the D-lactate dehydrogenase (DLD) enzyme pathway, demonstrating the sensitivity gain using a dense yeast solution. We foresee that yeast as a metabolic factory can find application as an abundant MRI phantom standard to calibrate and optimize molecular MRI protocols. Our study highlights the potential of using hyperpolarization to probe the metabolism of yeast and other microorganisms even with naturally abundant substrates, offering valuable insights into their response to various stimuli such as drugs, treatment, nourishment, and genetic modification, thereby advancing drug development and our understanding of biochemical processes.

Live magnetic observation of parahydrogen hyperpolarization dynamics

Hyperpolarized nuclear spins in molecules exhibit high magnetization that is unachievable by classical polarization techniques, making them widely used as sensors in physics, chemistry, and medicine. The state of a hyperpolarized material, however, is typically only studied indirectly and with partial destruction of magnetization, due to the nature of conventional detection by resonant-pickup NMR spectroscopy or imaging. Here, we establish atomic magnetometers with sub-pT sensitivity as an alternative modality to detect in real time the complex dynamics of hyperpolarized materials without disturbing or interrupting the magnetogenesis process. As an example of dynamics that are impossible to detect in real time by conventional means, we examine parahydrogen-induced 1H and 13C magnetization during adiabatic eigenbasis transformations at [Formula: see text]T-field avoided crossings. Continuous but nondestructive magnetometry reveals previously unseen spin dynamics, fidelity limits, and magnetization backaction effects. As a second example, we apply magnetometry to observe the chemical-exchange-driven 13C hyperpolarization of [1-13C]-pyruvate-the most important spin tracer for clinical metabolic imaging. The approach can be readily combined with other high-sensitivity magnetometers and is applicable to a broader range of general observation scenarios involving production, transport, and systems interaction of hyperpolarized compounds.

13C MRI of hyperpolarized pyruvate at 120 µT

Nuclear spin hyperpolarization increases the sensitivity of magnetic resonance dramatically, enabling many new applications, including real-time metabolic imaging. Parahydrogen-based signal amplification by reversible exchange (SABRE) was employed to hyperpolarize [1-13C]pyruvate and demonstrate 13C imaging in situ at 120 µT, about twice Earth's magnetic field, with two different signal amplification by reversible exchange variants: SABRE in shield enables alignment transfer to heteronuclei (SABRE-SHEATH), where hyperpolarization is transferred from parahydrogen to [1-13C]pyruvate at a magnetic field below 1 µT, and low-irradiation generates high tesla (LIGHT-SABRE), where hyperpolarization was prepared at 120 µT, avoiding magnetic field cycling. The 3-dimensional images of a phantom were obtained using a superconducting quantum interference device (SQUID) based magnetic field detector with submillimeter resolution. These 13C images demonstrate the feasibility of low-field 13C metabolic magnetic resonance imaging (MRI) of 50 mM [1-13C]pyruvate hyperpolarized by parahydrogen in reversible exchange imaged at about twice Earth's magnetic field. Using thermal 13C polarization available at 120 µT, the same experiment would have taken about 300 billion years.

Metal-Mediated Catalytic Polarization Transfer from para Hydrogen to 3,5-Dihalogenated Pyridines

The neutral catalysts [IrCl(H)2(NHC)(substrate)2] or [IrCl(H)2(NHC)(substrate)(sulfoxide)] are used to transfer polarization from para hydrogen (pH2) to 3,5-dichloropyridine and 3,5-dibromopyridine substrates. This is achieved in a rapid, reversible, and low-cost process that relies on ligand exchange within the active catalyst. Notably, the sulfoxide-containing catalyst systems produced NMR signal enhancements between 1 and 2 orders of magnitude larger than its unmodified counterpart. Consequently, this signal amplification by reversible exchange hyperpolarization method can boost the 1H, 13C, and 15N nuclear magnetic resonance (NMR) signal intensities by factors up to 4350, 1550, and 46,600, respectively (14.0, 1.3, and 15.4% polarization). In this paper, NMR and X-ray crystallography are used to map the evolution of catalytically important species and provide mechanistic rational for catalytic efficiency. Furthermore, applications in spontaneous radiofrequency amplification by stimulated emission and NMR reaction monitoring are also shown.

Enhancing the NMR signals of plant oil components using hyperpolarisation relayed via proton exchange

In this work, the limited sensitivity of magnetic resonance is addressed by using the hyperpolarisation method relayed signal amplification by reversible exchange (SABRE-Relay) to transfer latent magnetism from para-hydrogen, a readily isolated spin isomer of hydrogen gas, to components of key plant oils such as citronellol, geraniol, and nerol. This is achieved via relayed polarisation transfer in which an [Ir(H)2(IMes)(NH2R)3]Cl type complex produces hyperpolarised NH2R free in solution, before labile proton exchange between the hyperpolarisation carrier (NH2R) and the OH-containing plant oil component generates enhanced NMR signals for the latter. Consequently, up to ca. 200-fold 1H (0.65% 1H polarisation) and 800-fold 13C NMR signal enhancements (0.65% 13C polarisation) are recorded for these essential oils in seconds. Remarkably, the resulting NMR signals are not only diagnostic, but prove to propagate over large spin systems via a suitable coupling network. A route to optimise the enhancement process by varying the identity of the carrier NH2R, and its concentration is demonstrated. In order to prove utility, these pilot measurements are extended to study a much wider range of plant-derived molecules including rhodinol, verbenol, (1R)-endo-(+)-fenchyl alcohol, (-)-carveol, and linalool. Further measurements are then described which demonstrate citronellol and geraniol can be detected in an off-the-shelf healthcare product rose geranium oil at concentrations of just a few tens of μM in single scan 1H NMR measurements, which are not visible in comparable thermally polarised NMR experiments. This work therefore presents a significant expansion of the types of molecules amenable to hyperpolarisation using para-hydrogen and illustrates a real-world application in the diagnostic detection of low concentration analytes in mixtures.

In Vivo Metabolic Imaging of [1-13 C]Pyruvate-d3 Hyperpolarized By Reversible Exchange With Parahydrogen

Metabolic magnetic resonance imaging (MRI) using hyperpolarized (HP) pyruvate is becoming a non-invasive technique for diagnosing, staging, and monitoring response to treatment in cancer and other diseases. The clinically established method for producing HP pyruvate, dissolution dynamic nuclear polarization, however, is rather complex and slow. Signal Amplification By Reversible Exchange (SABRE) is an ultra-fast and low-cost method based on fast chemical exchange. Here, for the first time, we demonstrate not only in vivo utility, but also metabolic MRI with SABRE. We present a novel routine to produce aqueous HP [1-13 C]pyruvate-d3 for injection in 6 minutes. The injected solution was sterile, non-toxic, pH neutral and contained ≈30 mM [1-13 C]pyruvate-d3 polarized to ≈11 % (residual 250 mM methanol and 20 μM catalyst). It was obtained by rapid solvent evaporation and metal filtering, which we detail in this manuscript. This achievement makes HP pyruvate MRI available to a wide biomedical community for fast metabolic imaging of living organisms.

19 F-Labeled Probes for Recognition-Enabled Chromatographic 19 F NMR

The NMR technique is among the most powerful analytical methods for molecular structural elucidation, process monitoring, and mechanistic investigations; however, the direct analysis of complex real-world samples is often hampered by crowded NMR spectra that are difficult to interpret. The combination of fluorine chemistry and supramolecular interactions leads to a unique detection method named recognition-enabled chromatographic (REC) 19 F NMR, where interactions between analytes and 19 F-labeled probes are transduced into chromatogram-like 19 F NMR signals of discrete chemical shifts. In this account, we summarize our endeavor to develop novel 19 F-labeled probes tailored for separation-free multicomponent analysis. The strategies to achieve chiral discrimination, sensitivity enhancement, and automated analyte identification will be covered. The account will also provide a detailed discussion of the underlying principles for the design of molecular probes for REC 19 F NMR where appropriate.

Reversible Parahydrogen Induced Hyperpolarization of 15 N in Unmodified Amino Acids Unraveled at High Magnetic Field

Amino acids (AAs) and ammonia are metabolic markers essential for nitrogen metabolism and cell regulation in both plants and humans. NMR provides interesting opportunities to investigate these metabolic pathways, yet lacks sensitivity, especially in case of 15 N. In this study, spin order embedded in p-H2 is used to produce on-demand reversible hyperpolarization in 15 N of pristine alanine and ammonia under ambient protic conditions directly in the NMR spectrometer. This is made possible by designing a mixed-ligand Ir-catalyst, selectively ligating the amino group of AA by exploiting ammonia as a strongly competitive co-ligand and preventing deactivation of Ir by bidentate ligation of AA. The stereoisomerism of the catalyst complexes is determined by hydride fingerprinting using 1 H/D scrambling of the associated N-functional groups on the catalyst (i.e., isotopological fingerprinting), and unravelled by 2D-ZQ-NMR. Monitoring the transfer of spin order from p-H2 to 15 N nuclei of ligated and free alanine and ammonia targets using SABRE-INEPT with variable exchange delays pinpoints the monodentate elucidated catalyst complexes to be most SABRE active. Also RF-spin locking (SABRE-SLIC) enables transfer of hyperpolarization to 15 N. The presented high-field approach can be a valuable alternative to SABRE-SHEATH techniques since the obtained catalytic insights (stereochemistry and kinetics) will remain valid at ultra-low magnetic fields.

Spin dynamics of [1,2-13C2]pyruvate hyperpolarization by parahydrogen in reversible exchange at micro Tesla fields

Hyperpolarization of 13C-pyruvate via Signal Amplificaton By Reversibble Exchange (SABRE) is an important recent discovery because of both the relative simplicity of hyperpolarization and the central biological relevance of pyruvate as a biomolecular probe for in vitro or in vivo studies. Here, we analyze the [1,2-13C2]pyruvate-SABRE spin system and its field dependence theoretically and experimentally. We provide first-principles analysis of the governing 4-spin dihydride-13C2 Hamiltonian and numerical spin dynamics simulations of the 7-spin dihydride-13C2-CH3 system. The analytical and the numerical results are compared to matching systematic experiments. With these methods we unravel the observed spin state mixing of singlet states and triplet states at microTesla fields and we also analyze the dynamics during transfer from micro-Tesla field to high field for detection to understand the resulting spectra from the [1,2-13C2]pyruvate-SABRE system.

Over 20% Carbon-13 Polarization of Perdeuterated Pyruvate Using Reversible Exchange with Parahydrogen and Spin-Lock Induced Crossing at 50 μT

Carbon-13 hyperpolarized pyruvate is about to become the next-generation contrast agent for molecular magnetic resonance imaging of cancer and other diseases. Here, efficient and rapid pyruvate hyperpolarization is achieved via signal amplification by reversible exchange (SABRE) with parahydrogen through synergistic use of substrate deuteration, alternating, and static microtesla magnetic fields. Up to 22 and 6% long-lasting ¹³C polarization (T₁ = 3.7 ± 0.25 and 1.7 ± 0.1 min) is demonstrated for the C1 and C2 nuclear sites, respectively. The remarkable polarization levels become possible as a result of favorable relaxation dynamics at the microtesla fields. The ultralong polarization lifetimes will be conducive to yielding high polarization after purification, quality assurance, and injection of the hyperpolarized molecular imaging probes. These results pave the way to future in vivo translation of carbon-13 hyperpolarized molecular imaging probes prepared by this approach.

Real-Time Reaction Monitoring of Azide-Alkyne Cycloadditions Using Benchtop NMR-Based Signal Amplification by Reversible Exchange (SABRE)

Rufinamide, possessing a triazole ring, is a new antiepileptic drug (AED) relatively well-absorbed in the lower dose range (10 mg/kg per day) and is currently being used in antiepileptic medications. Triazole derivatives can interact with various enzymes and receptors in biological systems via diverse non-covalent interactions, thus inducing versatile biological effects. Strain-promoted azide-alkyne cycloaddition (SPAAC) is a significant method for obtaining triazoles, even under physiological conditions, in the absence of a copper catalyst. To confirm the progress of chemical reactions under biological conditions, research on reaction monitoring at low concentrations is essential. This promising strategy is gaining acceptance for applications in fields such as drug development and nanoscience. We investigated the optimum Ir catalyst and magnetic field for achieving maximum proton hyperpolarization transfer in triazole derivatives. These reactions were analyzed using signal amplification by reversible exchange (SABRE) to overcome the limitations of low sensitivity in nuclear magnetic resonance spectroscopy, when monitoring copper-free click reactions in real time. Finally, a more versatile copper-catalyzed click reaction was monitored in real time, using a 60 MHz benchtop NMR system, in order to analyze the reaction mechanism.

Missing Pieces in Structure Puzzles: How Hyperpolarized NMR Spectroscopy Can Complement Structural Biology and Biochemistry

Structure determination lies at the heart of many biochemical research programs. However, the "giants": X-ray diffraction, electron microscopy, molecular dynamics simulations, and nuclear magnetic resonance, among others, leave quite a few dark spots on the structural pictures drawn of proteins, nucleic acids, membranes, and other biomacromolecules. For example, structural models under physiological conditions or of short-lived intermediates often remain out of reach of the established experimental methods. This account frames the possibility of including hyperpolarized, that is, dramatically signal-enhanced NMR in existing workflows to fill these spots with detailed depictions. We highlight how integrating methods based on dissolution dynamic nuclear polarization can provide valuable complementary information about formerly inaccessible conformational spaces for many systems. A particular focus will be on hyperpolarized buffers to facilitate the NMR structure determination of challenging systems.

Catalyst-Free Aqueous Hyperpolarized [1-13C]Pyruvate Obtained by Re-Dissolution Signal Amplification by Reversible Exchange

Despite great successes in oncology, patient outcomes are often still discouraging, and hence the diagnostic imaging paradigm is increasingly shifting toward functional imaging of the pathology to better understand individual disease biology and to personalize therapies. The dissolution Dynamic Nuclear Polarization (d-DNP) hyperpolarization method has enabled unprecedented real-time MRI sensing of metabolism and tissue pH using hyperpolarized [1-13C]pyruvate as a biosensor with great potential for diagnosis and monitoring of cancer patients. However, current d-DNP is expensive and suffers from long hyperpolarization times, posing a substantial translational roadblock. Here, we report the development of Re-Dissolution Signal Amplification By Reversible Exchange (Re-D SABRE), which relies on fast and low-cost hyperpolarization of [1-13C]pyruvate by chemical exchange with parahydrogen at microtesla magnetic fields. [1-13C]pyruvate is precipitated from catalyst-containing methanol using ethyl acetate and rapidly reconstituted in aqueous media. 13C polarization of 9 ± 1% is demonstrated after redissolution in water with residual iridium mass fraction of 8.5 ± 1.5 ppm; further improvement is anticipated via process automation. Re-D SABRE makes hyperpolarized [1-13C]pyruvate biosensor available at a fraction of the cost (<$10,000) and production time (≈1 min) of currently used techniques and makes aqueous hyperpolarized [1-13C]pyruvate "ready" for in vivo applications.

In Situ Ternary Adduct Formation of Yttrium Polyaminocarboxylates Leads to Small Molecule Capture and Activation

In this work the chemistry of yttrium complexes is exploited for small molecule capture and activation. Nuclear magnetic resonance (NMR) and density functional theory (DFT) studies were used to investigate the in situ formation of solution state ternary yttrium-acetate, yttrium-bicarbonate, and yttrium-pyruvate adducts with a range of polyaminocarboxylate chelates. These studies reveal that [Y(DO3A)(H₂ O)₂ ] (H₃ DO3A - 1,4,7,10-tetraazacyclododecane-1,4,7-tricarboxylic acid) and [Y(EDTA)(H₂ O)_q ]^- (H₄ EDTA - ethylenediaminetetraacetic acid, q = 2 and 3) are able to form ternary adducts with bicarbonate and pyruvate. In the latter, unusual decarboxylation of pyruvate to form acetic acid and CO₂ was observed and further studied using SABRE-hyperpolarised ¹³ C NMR (SABRE - signal amplification by reversible exchange) to provide information about the reaction timescale and lifetime of intermediates involved in this conversion. The work presented demonstrates that yttrium complexes can capture and activate small molecules, which may lead to novel and useful applications of this metal in catalysis and medical imaging.

Multiaxial fields improve SABRE efficiency by preserving hydride order

Signal Amplification By Reversible Exchange (SABRE) and the heteronuclear variant, X-SABRE, increase the sensitivity of magnetic resonance techniques using order derived from reversible binding of para-hydrogen. One current limitation of SABRE is suboptimal polarization transfer over the lifetime of the complex. Here, we demonstrate a multiaxial low-field pulse sequence which allows optimal polarization build-up during a low-field "evolution" pulse, followed by a high-field "mixing" pulse which permits proton decoupling along an orthogonal axis. This preserves the singlet character of the hydrides while allowing exchange to replenish the ligands on the iridium catalyst. This strategy leads to a 2.5-fold improvement over continuous field SABRE SHEATH experimentally which was confirmed with numerical simulation.

A Field-Independent Method for the Rapid Generation of Hyperpolarized [1-13 C]Pyruvate in Clean Water Solutions for Biomedical Applications

Hyperpolarization methods in magnetic resonance enhance the signals by several orders of magnitude, opening new windows for real-time investigations of dynamic processes in vitro and in vivo. Here, we propose a field-independent para-hydrogen-based pulsed method to produce rapidly hyperpolarized 13 C-labeled substrates. We demonstrate the method by polarizing the carboxylic carbon of the pyruvate moiety in a purposely designed precursor to 24 % at ≈22 mT. Following a fast purification procedure, we measure 8 % polarization on free [1-13 C]pyruvate in clean water solutions at physiological conditions at 7 T. The enhanced signals allow real-time monitoring of the pyruvate-lactate conversion in cancer cells, demonstrating the potential of the method for biomedical applications in combination with existing or developing magnetic resonance technologies.

Toward Optimizing and Understanding Reversible Hyperpolarization of Lactate Esters Relayed from para-Hydrogen

The SABRE-Relay hyperpolarization method is used to enhance the ¹H and ¹³C NMR signals of lactate esters, which find use in a wide range of medical, pharmaceutical, and food science applications. This is achieved by the indirect relay of magnetization from para-hydrogen, a spin isomer of dihydrogen, to OH-containing lactate esters via a SABRE-hyperpolarized NH intermediary. This delivers ¹H and ¹³C NMR signal enhancements as high as 245- and 985-fold, respectively, which makes the lactate esters far more detectable using NMR. DFT-calculated J-couplings and spin dynamics simulations indicate that, while polarization can be transferred from the lactate OH to other ¹H nuclei via the J-coupling network, incoherent mechanisms are needed to polarize the ¹³C nuclei at the 6.5 mT transfer field used. The resulting sensitivity boost is predicted to be of great benefit for the NMR detection and quantification of low concentrations (<mM) of lactate esters and could provide a useful precursor for the production of hyperpolarized lactate, a key metabolite.

Advancing homogeneous catalysis for parahydrogen-derived hyperpolarisation and its NMR applications

Parahydrogen-induced polarisation (PHIP) is a nuclear spin hyperpolarisation technique employed to enhance NMR signals for a wide range of molecules. This is achieved by exploiting the chemical reactions of parahydrogen (para-H2), the spin-0 isomer of H2. These reactions break the molecular symmetry of para-H2 in a way that can produce dramatically enhanced NMR signals for reaction products, and are usually catalysed by a transition metal complex. In this review, we discuss recent advances in novel homogeneous catalysts that can produce hyperpolarised products upon reaction with para-H2. We also discuss hyperpolarisation attained in reversible reactions (termed signal amplification by reversible exchange, SABRE) and focus on catalyst developments in recent years that have allowed hyperpolarisation of a wider range of target molecules. In particular, recent examples of novel ruthenium catalysts for trans and geminal hydrogenation, metal-free catalysts, iridium sulfoxide-containing SABRE systems, and cobalt complexes for PHIP and SABRE are reviewed. Advances in this catalysis have expanded the types of molecules amenable to hyperpolarisation using PHIP and SABRE, and their applications in NMR reaction monitoring, mechanistic elucidation, biomedical imaging, and many other areas, are increasing.

Isotopological Fingerprinting Using 1H/D Scrambling Identifies the Stereochemistry of Hyperpolarization Catalysts Transferring Spin Polarization from Parahydrogen to Substrates Using Signal Amplification by Reversible Exchange

Hyperpolarization using signal amplification by reversible exchange (SABRE) relies on target molecules and parahydrogen coordinating to a transition metal catalyst. Identification of this coordinated state becomes increasingly important, especially since bio-relevant targets such as pyruvate and amino acids exhibiting multiple binding sites are becoming compatible with SABRE. In this report, we present a fingerprinting method to discriminate and identify ligand binding sites without requiring the presence of a sensitive or isotope-labeled heteroatom. Adding a small concentration of protons to a deuterated medium, spontaneous ¹H/D scrambling of exchangeable protons encodes the ligands each with an isotopological fingerprint. By use of rapid 2D zero quantum NMR, the binding sites are decoded from the hydrides in less than a minute. The new methodology is explained and demonstrated on Ir mixed complexes with pyridine, benzylamine, and ammonia as common N-functional ligands.

Order-Unity 13 C Nuclear Polarization of [1-13 C]Pyruvate in Seconds and the Interplay of Water and SABRE Enhancement

Signal Amplification By Reversible Exchange in SHield Enabled Alignment Transfer (SABRE-SHEATH) is investigated to achieve rapid hyperpolarization of 13 C1 spins of [1-13 C]pyruvate, using parahydrogen as the source of nuclear spin order. Pyruvate exchange with an iridium polarization transfer complex can be modulated via a sensitive interplay between temperature and co-ligation of DMSO and H2 O. Order-unity 13 C (>50 %) polarization of catalyst-bound [1-13 C]pyruvate is achieved in less than 30 s by restricting the chemical exchange of [1-13 C]pyruvate at lower temperatures. On the catalyst bound pyruvate, 39 % polarization is measured using a 1.4 T NMR spectrometer, and extrapolated to >50 % at the end of build-up in situ. The highest measured polarization of a 30-mM pyruvate sample, including free and bound pyruvate is 13 % when using 20 mM DMSO and 0.5 M water in CD3 OD. Efficient 13 C polarization is also enabled by favorable relaxation dynamics in sub-microtesla magnetic fields, as indicated by fast polarization buildup rates compared to the T1 spin-relaxation rates (e. g., ∼0.2 s-1 versus ∼0.1 s-1 , respectively, for a 6 mM catalyst-[1-13 C]pyruvate sample). Finally, the catalyst-bound hyperpolarized [1-13 C]pyruvate can be released rapidly by cycling the temperature and/or by optimizing the amount of water, paving the way to future biomedical applications of hyperpolarized [1-13 C]pyruvate produced via comparatively fast and simple SABRE-SHEATH-based approaches.

Temperature Cycling Enables Efficient 13C SABRE-SHEATH Hyperpolarization and Imaging of [1-13C]-Pyruvate

Molecular metabolic imaging in humans is dominated by positron emission tomography (PET). An emerging nonionizing alternative is hyperpolarized MRI of 13C-pyruvate, which is innocuous and has a central role in metabolism. However, similar to PET, hyperpolarized MRI with dissolution dynamic nuclear polarization (d-DNP) is complex costly, and requires significant infrastructure. In contrast, Signal Amplification By Reversible Exchange (SABRE) is a fast, cheap, and scalable hyperpolarization technique. SABRE in SHield Enables Alignment Transfer to Heteronuclei (SABRE-SHEATH) can transfer polarization from parahydrogen to 13C in pyruvate; however, polarization levels remained low relative to d-DNP (1.7% with SABRE-SHEATH versus ≈60% with DNP). Here we introduce a temperature cycling method for SABRE-SHEATH that enables >10% polarization on [1-13C]-pyruvate, sufficient for successful in vivo experiments. First, at lower temperatures, ≈20% polarization is accumulated on SABRE catalyst-bound pyruvate, which is released into free pyruvate at elevated temperatures. A kinetic model of differential equations is developed that explains this effect and characterizes critical relaxation and buildup parameters. With the large polarization, we demonstrate the first 13C pyruvate images with a cryogen-free MRI system operated at 1.5 T, illustrating that inexpensive hyperpolarization methods can be combined with low-cost MRI systems to obtain a broadly available, yet highly sensitive metabolic imaging platform.

Hyperpolarised NMR to aid molecular profiling of electronic cigarette aerosols

Signal amplification by reversible exchange (SABRE) hyperpolarisation is used to enhance the NMR signals of nicotine and acrolein in methanol-d4 solutions of electronic cigarette aerosols. Consequently, detection of 74 μM nicotine is possible in just a single scan 1H NMR spectrum. The first example of an aldehyde hyperpolarised using SABRE is demonstrated and we work towards novel real-world applications of SABRE-hyperpolarised NMR for chemical analysis.

Hyperpolarization study on remdesivir with its biological reaction monitoring via signal amplification by reversible exchange

Our experiments indicate hyperpolarized proton signals in the entire structure of remdesivir are obtained due to a long-distance polarization transfer by para-hydrogen. SABRE-based biological real-time reaction monitoring, by using a protein enzyme under mild conditions is carried out. It represents the first successful para-hydrogen based hyperpolarization application in biological reaction monitoring.

Hyperpolarized proton signals in the entire structure of remdesivir are obtained due to a long-distance polarization transfer by para-hydrogen. Biological real-time reaction monitoring, by using a protein enzyme under mild conditions is carried out.

Parahydrogen Hyperpolarization Allows Direct NMR Detection of α-Amino Acids in Complex (Bio)mixtures

The scope of non-hydrogenative parahydrogen hyperpolarization (nhPHIP) techniques has been expanding over the last years, with the continuous addition of important classes of substrates. For example, pyruvate can now be hyperpolarized using the Signal Amplification By Reversible Exchange (SABRE) technique, offering a fast, efficient and low-cost PHIP alternative to Dynamic Nuclear Polarization for metabolic imaging studies. Still, important biomolecules such as amino acids have so far resisted PHIP, unless properly functionalized. Here, we report on an approach to nhPHIP for unmodified α-amino acids that allows their detection and quantification in complex mixtures at sub-micromolar concentrations. This method was tested on human urine, in which natural α-amino acids could be measured after dilution with methanol without any additional sample treatment.

A Versatile Compact Parahydrogen Membrane Reactor

We introduce a Spin Transfer Automated Reactor (STAR) that produces continuous parahydrogen induced polarization (PHIP), which is stable for hours to days. We use the PHIP variant called signal amplification by reversible exchange (SABRE), which is particularly well suited to produce continuous hyperpolarization. The STAR is operated in conjunction with benchtop (1.1 T) and high field (9.4 T) NMR magnets, highlighting the versatility of this system to operate with any NMR or MRI system. The STAR uses semipermeable membranes to efficiently deliver parahydrogen into solutions at nano to milli Tesla fields, which enables 1 H, 13 C, and 15 N hyperpolarization on a large range of substrates including drugs and metabolites. The unique features of the STAR are leveraged for important applications, including continuous hyperpolarization of metabolites, desirable for examining steady-state metabolism in vivo, as well as for continuous RASER signals suitable for the investigation of new physics.

Parahydrogen-Induced Polarization of Amino Acids

Nuclear magnetic resonance (NMR) has become a universal method for biochemical and biomedical studies, including metabolomics, proteomics, and magnetic resonance imaging (MRI). By increasing the signal of selected molecules, the hyperpolarization of nuclear spin has expanded the reach of NMR and MRI even further (e.g. hyperpolarized solid-state NMR and metabolic imaging in vivo). Parahydrogen (pH2 ) offers a fast and cost-efficient way to achieve hyperpolarization, and the last decade has seen extensive advances, including the synthesis of new tracers, catalysts, and transfer methods. The portfolio of hyperpolarized molecules now includes amino acids, which are of great interest for many applications. Here, we provide an overview of the current literature and developments in the hyperpolarization of amino acids and peptides.

Density Functional Theory Study of Reaction Equilibria in Signal Amplification by Reversible Exchange

An in-depth theoretical analysis of key chemical equilibria in Signal Amplification by Reversible Exchange (SABRE) is provided, employing density functional theory calculations to characterize the likely reaction network. For all reactions in the network, the potential energy surface is probed to identify minimum energy pathways. Energy barriers and transition states are calculated, and harmonic transition state theory is applied to calculate exchange rates that approximate experimental values. The reaction network energy surface can be modulated by chemical potentials that account for the dependence on concentration, temperature, and partial pressure of molecular constituents (hydrogen, methanol, pyridine) supplied to the experiment under equilibrium conditions. We show that, under typical experimental conditions, the Gibbs free energies of the two key states involved in pyridine-hydrogen exchange at the common Ir-IMes catalyst system in methanol are essentially the same, i. e., nearly optimal for SABRE. We also show that a methanol-containing intermediate is plausible as a transient species in the process.

Ultrafast Laplace NMR to study metal-ligand interactions in reversible polarisation transfer from parahydrogen

Laplace Nuclear Magnetic Resonance (NMR) can determine relaxation parameters and diffusion constants, giving valuable information about molecular structure and dynamics. Information about relaxation times (T1 and T2) and the self-diffusion coefficient (D) can be extracted from exponentially decaying NMR signals by performing a Laplace transform, which is a different approach to traditional NMR involving Fourier transform of a free induction decay. Ultrafast Laplace NMR uses spatial encoding to collect the entire data set in just a single scan which provides orders of magnitude time savings. In this work we use ultrafast Laplace NMR D-T2 correlation sequences to measure key relaxation (T2) and diffusion (D) parameters of methanolic solutions containing pyridine. For the first time we combine this technique with the hyperpolarisation technique Signal Amplification By Reversible Exchange (SABRE), which employs an iridium catalyst to reversibly transfer polarisation from parahydrogen, to boost the 1H NMR signals of pyridine by up to 300-fold. We demonstrate use of ultrafast Laplace NMR to monitor changes in pyridine T2 and D associated with ligation to the iridium SABRE catalyst and kinetic isotope exchange reactions. The combined 1440-fold reduction in experiment time and 300-fold 1H NMR signal enhancement allow the determination of pyridine D coefficients and T2 values at 25 mM concentrations in just 3 seconds using SABRE hyperpolarised ultrafast Laplace NMR.

Centralizer theory for long-lived spin states

Nuclear long-lived spin states represent spin density operator configurations that are exceptionally well protected against spin relaxation phenomena. Their long-lived character is exploited in a variety of Nuclear Magnetic Resonance (NMR) techniques. Despite the growing importance of long-lived spin states in modern NMR, strategies for their identification have changed little over the last decade. The standard approach heavily relies on a chain of group theoretical arguments. In this paper, we present a more streamlined method for the calculation of such configurations. Instead of focusing on the symmetry properties of the relaxation superoperator, we focus on its corresponding relaxation algebra. This enables us to analyze long-lived spin states with Lie algebraic methods rather than group theoretical arguments. We show that the centralizer of the relaxation algebra forms a basis for the set of long-lived spin states. The characterization of the centralizer, on the other hand, does not rely on any special symmetry arguments, and its calculation is straightforward. We outline a basic algorithm and illustrate advantages by considering long-lived spin states for some spin-1/2 pairs and rapidly rotating methyl groups.

Optimization of signal amplification by reversible exchange for polarization of tridentate chelating bis[(2-pyridyl)alkyl]amine

Signal amplification by reversible exchange (SABRE) is an effective NMR hyperpolarization technique for signal enhancement using para-hydrogen on iridium catalysts. To date, monodentate chelating nitrogen analogs have been predominantly used as substrates for SABRE because of the limited chelating sites of the Ir-catalyst with different molecular orientations. Herein, for the first time, the use of a tridentate chelating ligand (BPEA) containing pyridine moieties and a secondary amine as a SABRE substrate is demonstrated. For the optimization of the tridentate chelating ligand, alkyl chain lengths were varied with the optimization of the external magnetic field and concentrations of three different ligands. Because many chemically multidentate complexes present in nature have scarcely been studied as SABRE substrates, this optimized tridentate chelating ligand structure with the SABRE catalyst and its polarization transfer from para-hydrogen will broaden the scope of hyperpolarizable substrates and help in the investigation of chelating structures for future applications.

Hyperpolarisation of weakly binding N-heterocycles using signal amplification by reversible exchange

Signal Amplification by Reversible Exchange (SABRE) is a catalytic method for improving the detection of molecules by magnetic resonance spectroscopy. It achieves this by simultaneously binding the target substrate (sub) and para-hydrogen to a metal centre. To date, sterically large substrates are relatively inaccessible to SABRE due to their weak binding leading to catalyst destabilisation. We overcome this problem here through a simple co-ligand strategy that allows the hyperpolarisation of a range of weakly binding and sterically encumbered N-heterocycles. The resulting 1H NMR signal size is increased by up to 1400 times relative to their more usual Boltzmann controlled levels at 400 MHz. Hence, a significant reduction in scan time is achieved. The SABRE catalyst in these systems takes the form [IrX(H)2(NHC)(sulfoxide)(sub)] where X = Cl, Br or I. These complexes are shown to undergo very rapid ligand exchange and lower temperatures dramatically improve the efficiency of these SABRE catalysts.

Design of Nuclear Magnetic Resonance Molecular Probes for Hyperpolarized Bioimaging

Nuclear hyperpolarization has emerged as a method to dramatically enhance the sensitivity of NMR spectroscopy. By application of this powerful tool, small molecules with stable isotopes have been used for highly sensitive biomedical molecular imaging. The recent development of molecular probes for hyperpolarized in vivo analysis has demonstrated the ability of this technique to provide unique metabolic and physiological information. This review presents a brief introduction of hyperpolarization technology, approaches to the rational design of molecular probes for hyperpolarized analysis, and examples of molecules that have met with success in vitro or in vivo.

15 N NMR Hyperpolarization of Radiosensitizing Antibiotic Nimorazole by Reversible Parahydrogen Exchange in Microtesla Magnetic Fields

Nimorazole belongs to the imidazole-based family of antibiotics to fight against anaerobic bacteria. Moreover, nimorazole is now in Phase 3 clinical trial in Europe for potential use as a hypoxia radiosensitizer for treatment of head and neck cancers. We envision the use of [15 N3 ]nimorazole as a theragnostic hypoxia contrast agent that can be potentially deployed in the next-generation MRI-LINAC systems. Herein, we report the first steps to create long-lasting (for tens of minutes) hyperpolarized state on three 15 N sites of [15 N3 ]nimorazole with T1 of up to ca. 6 minutes. The nuclear spin polarization was boosted by ca. 67000-fold at 1.4 T (corresponding to P15N of 3.2 %) by 15 N-15 N spin-relayed SABRE-SHEATH hyperpolarization technique, relying on simultaneous exchange of [15 N3 ]nimorazole and parahydrogen on polarization transfer Ir-IMes catalyst. The presented results pave the way to efficient spin-relayed SABRE-SHEATH hyperpolarization of a wide range of imidazole-based antibiotics and chemotherapeutics.

Exploring the hyperpolarisation of EGTA-based ligands using SABRE

The design of molecules whose magnetic resonance (MR) signals report on their biological environment is receiving attention as a route to non-invasive functional MR. Hyperpolarisation techniques improve the sensitivity of MR and enable real time low concentration MR imaging, allowing for the development of novel functional imaging methodologies. In this work, we report on the synthesis of a series of EGTA-derived molecules (EGTA - ethylene glycol-bis(2-aminoethylether)-N,N,N',N'-tetraacetic acid), whose core structures are known to bind biologically relevant metal ions in vivo, in addition to pyridyl rings that allow reversible ligation to an iridium dihydride complex. Consequently, they are amenable to hyperpolarisation through the parahydrogen-based signal amplification by reversible exchange (SABRE) process. We investigate how the proximity of EGTA and pyridine units, and the identity of the linker group, affect the SABRE hyperpolarisation attained for each agent. We also describe the effect of catalyst identity and co-ligand presence on these measurements and can achieve ¹H NMR signal enhancements of up to 160-fold. We rationalise these results to suggest the design elements needed for probes amenable to SABRE hyperpolarisation whose MR signals might in the future report on the presence of metal ions.

Reversible Hyperpolarization of Ketoisocaproate Using Sulfoxide-containing Polarization Transfer Catalysts

The substrate scope of sulfoxide-containing magnetisation transfer catalysts is extended to hyperpolarize α-ketoisocaproate and α-ketoisocaproate-1-[13 C]. This is achieved by forming [Ir(H)2 (κ2 -ketoisocaproate)(N-heterocyclic carbene)(sulfoxide)] which transfers latent magnetism from p-H2 via the signal amplification by reversible exchange (SABRE) process. The effect of polarization transfer field on the formation of enhanced 13 C magnetization is evaluated. Consequently, performing SABRE in a 0.5 μT field enabled most efficient magnetisation transfer. 13 C NMR signals for α-ketoisocaproate-1-[13 C] in methanol-d4 are up to 985-fold more intense than their traditional Boltzmann derived signal intensity (0.8 % 13 C polarisation). Single crystal X-ray diffraction reveals the formation of the novel catalyst decomposition products [Ir(μ-H)(H)2 (IMes)(SO(Ph)(Me)2 )]2 and [(Ir(H)2 (IMes)(SO(Me)2 ))2 (μ-S)] when the sulfoxides methylphenylsulfoxide and dimethylsulfoxide are used respectively.

Robust transformation of singlet order into heteronuclear magnetisation over an extended coupling range

Several important NMR procedures involve the conversion of nuclear singlet order into heteronuclear magnetisation, including some experiments involving long-lived spin states and parahydrogen-induced hyperpolarisation. However most existing sequences suffer from a limited range of validity or a lack of robustness against experimental imperfections. We present a new radio-frequency scheme for the transformation of the singlet order of a chemically-equivalent homonuclear spin pair into the magnetisation of a heteronuclear coupling partner. The proposed radio-frequency (RF) scheme is called gS2hM (generalized singlet-to-heteronuclear magnetisation) and has good compensation for common experimental errors such as RF and static field inhomogeneities. The sequence retains its robustness for homonuclear spin pairs in the intermediate coupling regime, characterised by the in-pair coupling being of the same order of magnitude as the difference between the out-of-pair couplings. This is a substantial improvement to the validity range of existing sequences. Analytical solutions for the pulse sequence parameters are provided. Experimental results are shown for two test cases.

Parahydrogen-Induced Polarization of Diethyl Ether Anesthetic

The growing interest in magnetic resonance imaging (MRI) for assessing regional lung function relies on the use of nuclear spin hyperpolarized gas as a contrast agent. The long gas-phase lifetimes of hyperpolarized 129 Xe make this inhalable contrast agent acceptable for clinical research today despite limitations such as high cost, low throughput of production and challenges of 129 Xe imaging on clinical MRI scanners, which are normally equipped with proton detection only. We report on low-cost and high-throughput preparation of proton-hyperpolarized diethyl ether, which can be potentially employed for pulmonary imaging with a nontoxic, simple, and sensitive overall strategy using proton detection commonly available on all clinical MRI scanners. Diethyl ether is hyperpolarized by pairwise parahydrogen addition to vinyl ethyl ether and characterized by 1 H NMR spectroscopy. Proton polarization levels exceeding 8 % are achieved at near complete chemical conversion within seconds, causing the activation of radio amplification by stimulated emission radiation (RASER) throughout detection. Although gas-phase T1 relaxation of hyperpolarized diethyl ether (at partial pressure of 0.5 bar) is very efficient, with T1 of ca. 1.2 second, we demonstrate that, at low magnetic fields, the use of long-lived singlet states created via pairwise parahydrogen addition extends the relaxation decay by approximately threefold, paving the way to bioimaging applications and beyond.

Parahydrogen-Induced Hyperpolarization of Gases

Imaging of gases is a major challenge for any modality including MRI. NMR and MRI signals are directly proportional to the nuclear spin density and the degree of alignment of nuclear spins with applied static magnetic field, which is called nuclear spin polarization. The level of nuclear spin polarization is typically very low, i.e., one hundred thousandth of the potential maximum at 1.5 T and a physiologically relevant temperature. As a result, MRI typically focusses on imaging highly concentrated tissue water. Hyperpolarization methods transiently increase nuclear spin polarizations up to unity, yielding corresponding gains in MRI signal level of several orders of magnitude that enable the 3D imaging of dilute biomolecules including gases. Parahydrogen-induced polarization is a fast, highly scalable, and low-cost hyperpolarization technique. The focus of this Minireview is to highlight selected advances in the field of parahydrogen-induced polarization for the production of hyperpolarized compounds, which can be potentially employed as inhalable contrast agents.

Generalised magnetisation-to-singlet-order transfer in nuclear magnetic resonance

A variety of pulse sequences have been described for converting nuclear spin magnetisation into long-lived singlet order for nuclear spin-1/2 pairs. Existing sequences operate well in two extreme parameter regimes. The magnetisation-to-singlet (M2S) pulse sequence performs a robust conversion of nuclear spin magnetisation into singlet order in the near-equivalent limit, meaning that the difference in chemical shift frequencies of the two spins is much smaller than the spin-spin coupling. Other pulse sequences operate in the strong-inequivalence regime, where the shift difference is much larger than the spin-spin coupling. However both sets of pulse sequences fail in the intermediate regime, where the chemical shift difference and the spin-spin coupling are roughly equal in magnitude. We describe a generalised version of M2S, called gM2S, which achieves robust singlet order excitation for spin systems ranging from the near-equivalence limit well into the intermediate regime. This closes an important gap left by existing pulse sequences. The efficiency of the gM2S sequence is demonstrated numerically and experimentally for near-equivalent and intermediate-regime cases.

Optimisation of pyruvate hyperpolarisation using SABRE by tuning the active magnetisation transfer catalyst

Hyperpolarisation techniques such as signal amplification by reversible exchange (SABRE) can deliver NMR signals several orders of magnitude larger than those derived under Boltzmann conditions. SABRE is able to catalytically transfer latent magnetisation from para-hydrogen to a substrate in reversible exchange via temporary associations with an iridium complex. SABRE has recently been applied to the hyperpolarisation of pyruvate, a substrate often used in many in vivo MRI studies. In this work, we seek to optimise the pyruvate-13C2 signal gains delivered through SABRE by fine tuning the properties of the active polarisation transfer catalyst. We present a detailed study of the effects of varying the carbene and sulfoxide ligands on the formation and behaviour of the active [Ir(H)2(η2-pyruvate)(sulfoxide)(NHC)] catalyst to produce a rationale for achieving high pyruvate signal gains in a cheap and refreshable manner. This optimisation approach allows us to achieve signal enhancements of 2140 and 2125-fold for the 1-13C and 2-13C sites respectively of sodium pyruvate-1,2-[13C2].

Probing the Hydrogenation of Vinyl Sulfoxides Using para-Hydrogen

Vinyl sulfoxides are an important functional group used in a wide range of organic transformations. Here, we use [IrCl(COD)(IMes)] where IMes = 1,3-bis(2,4,6-trimethyl-phenyl)imidazole-2-ylidene and COD = cis,cis-1,5-cyclooctadiene to rapidly hydrogenate phenylvinylsulfoxide. We use para-hydrogen-induced hyperpolarization (PHIP) to follow this reaction with [IrCl(H)2(IMes)(S(O)(Ph)(Et))2] dominating in the later stages. Decomposition to form the reduced C-S bond cleavage product [Ir2(H)3(κ2-H)(κ2-SPh)2(IMes)2(S(Et)(Ph)O)] limits turnover. The related product [Ir2(H)4(κ2-S)(IMes)2(S(O)(CH2Ph)2)2] is formed from dibenzylsulfoxide, demonstrating the wider utility of this transformation.