Photoredoxkatalytische α‐Alkoxypentafluorosulfanylierung von α‐Methyl‐ und α‐Phenylstyrol mithilfe von SF 6

Electron-Poor Acridones and Acridiniums as Super Photooxidants in Molecular Photoelectrochemistry by Unusual Mechanisms

Electron-deficient acridones and in situ generated acridinium salts are reported as potent, closed-shell photooxidants that undergo surprising mechanisms. When bridging acyclic triarylamine catalysts with a carbonyl group (acridones), this completely diverts their behavior away from open-shell, radical cationic, 'beyond diffusion' photocatalysis to closed-shell, neutral, diffusion-controlled photocatalysis. Brønsted acid activation of acridones dramatically increases excited state oxidation power (by +0.8 V). Upon reduction of protonated acridones, they transform to electron-deficient acridinium salts as even more potent photooxidants (*E1/2 =+2.56-3.05 V vs SCE). These oxidize even electron-deficient arenes where conventional acridinium salt photooxidants have thusfar been limited to electron-rich arenes. Surprisingly, upon photoexcitation these electron-deficient acridinium salts appear to undergo two electron reductive quenching to form acridinide anions, spectroscopically-detected as their protonated forms. This new behaviour is partly enabled by a catalyst preassembly with the arene, and contrasts to conventional SET reductive quenching of acridinium salts. Critically, this study illustrates how redox active chromophoric molecules initially considered photocatalysts can transform during the reaction to catalytically active species with completely different redox and spectroscopic properties.

Activation of SF5CF3 by the N-Heterocyclic Carbene SIMes

The greenhouse gas SF5CF3 was photochemically activated with SIMes (1,3-Bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) to give 1,3-dimesityl-2,2-difluoroimidazolidine (SIMesF2), and 1,3-dimesitylimidazolidine-2-sulfide, as well as the trifluoromethylated carbene derivative 1,3-dimesityl-2-fluoro-2-trifluoromethylimidazolidine. CF3 radicals, as well as SF4, serve presumably as intermediates of the conversions. In addition, the photochemical activation of SF5CF3 was performed in the presence of triphenylphosphine. The formation of triphenyldifluorophosphorane and triphenylphosphine sulfide was observed.

Reduction of SF5CF3via iridium catalysis: radical trifluoromethylation of aromatics

The greenhouse gas SF₅CF₃ acts as CF₃ source for the photocatalytic trifluoromethylation of arenes on using [Ir(dtbbpy)(ppy)₂]PF₆ (4,4'-di-tert-butyl-2,2'-dipyridyl, ppy = 2-phenylpyridine) as catalyst. The trifluoromethylation of C₆D₆ in the presence of 1-octanol results in the concomitant generation of 1-fluorooctane, presumably by intermediate SF₄.

Oxidative Fluorination of Selenium and Tellurium Compounds using a Thermally Stable Phosphonium SF5 - Salt Accessible from SF6

Fluorinated group 16 moieties are attractive building blocks in synthetic chemistry but only few synthetic methods are available to prepare them. Herein, we report a new oxidative fluorination reagent capable of stabilizing reactive fluorinated anions. It consists of an SF₅ ^- anion and a chemically inert phosphonium cation and is exceptionally thermally stable. Accordingly, it was used to generate the SeF₅ ^- and TeF₅ ^- anions from the elemental chalcogens and to prepare the unknown tetrafluoro(phenyl)-λ⁵ -selenate PhSeF₄ ^- and -tellurate PhTeF₄ ^- from the corresponding diphenyl dichalcogenides. In addition, we show that further derivatization of [PhTeF₄ ]^- by oxidation to trans-PhTeF₄ O^- and subsequent alkylation gives access to a new class of trans-(alkoxy)(phenyl)tetrafluoro-λ⁶ -tellanes (trans-PhTeF₄ OR), thus providing an approach to introduce the functional group into organic molecules.

Direct C−H Trifluoromethylation of (Hetero)Arenes in Water Enabled by Organic Photoredox‐Active Amphiphilic Nanoparticles

Photoredox‐catalyzed chemical conversions are predominantly operated in organic media to ensure good compatibility between substrates and catalysts. Yet, when conducted in aqueous media, they are an attractive, mild, and green way to introduce functional groups into organic molecules. We here show that trifluoromethyl groups can be readily installed into a broad range of organic compounds by using water as the reaction medium and light as the energy source. To bypass solubility obstacles, we developed robust water‐soluble polymeric nanoparticles that accommodate reagents and photocatalysts within their hydrophobic interior under high local concentrations. By taking advantage of the high excited state reduction potential of N‐phenylphenothiazine (PTH) through UV light illumination, the direct C−H trifluoromethylation of a wide array of small organic molecules is achieved selectively with high substrate conversion. Key to our approach is slowing down the production of CF₃ radicals during the chemical process by reducing the catalyst loading as well as the light intensity, thereby improving effectiveness and selectivity of this aqueous photocatalytic method. Furthermore, the catalyst system shows excellent recyclability and can be fueled by sunlight. The method we propose here is versatile, widely applicable, energy efficient, and attractive for late‐stage introduction of trifluoromethyl groups into biologically active molecules.

Oxidative Fluorination of Heteroatoms Enabled by Trichloroisocyanuric Acid and Potassium Fluoride

In synthetic method development, the most rewarding path is seldom a straight line. While our initial entry into pentafluorosulfanyl (SF₅) chemistry did not go according to plan (due to inaccessibility of reagents such as SF₅Cl at the time), a “detour” led us to establish mild and inexpensive oxidative fluorination conditions that made aryl‐SF₅ compound synthesis more accessible. The method involved the use of potassium fluoride and trichloroisocyanuric acid (TCICA)—a common swimming pool disinfectant—as opposed to previously employed reagents such as F₂, XeF₂, HF, and Cl₂. Thereafter, curiosity led us to explore applications of TCICA/KF as a more general approach to the synthesis of fluorinated Group 15, 16, and 17 heteroatoms in organic scaffolds; this, in turn, prompted SC‐XRD, VT‐NMR, computational, and physical organic studies. Ultimately, it was discovered that TCICA/KF can be used to synthesize SF₅Cl, enabling SF₅ chemistry in an unexpected way.

Metal-Free SF6 Activation: A New SF5 -Based Reagent Enables Deoxyfluorination and Pentafluorosulfanylation Reactions

The activation of SF₆ , a potent greenhouse gas, under metal-free and visible light conditions is reported. Herein, mechanistic investigations including EPR spectroscopy, NMR studies and cyclic voltammetry allowed the rational design of a new fluorinating reagent which was synthesized from the 2-electron activation of SF₆ with commercially available TDAE. This new SF₅ -based reagent was efficiently employed for the deoxyfluorination of CO₂ and the fluorinative desulfurization of CS₂ allowing the formation of useful fluorinated amines. Moreover, for the first time we demonstrated that our SF₅ -based reagent could afford the mild generation of Cl-SF₅ gas. This finding was exploited for the chloro-pentafluorosulfanylation of alkynes and alkenes.

(Hetero)aryl-SVI Fluorides: Synthetic Development and Opportunities

(Hetero)arylsulfur compounds where the S atom is in the oxidation state VI represent a large percentage of the molecular functionalities present in organic chemistry. More specifically, (hetero)aryl‐S^VI fluorides have recently received enormous attention because of their potential as chemical biology probes, as a result of their reactivity in a simple, modular, and efficient manner. Whereas the synthesis and application of the level 1 fluorination at S^VI atoms (sulfonyl and sulfonimidoyl fluorides) have been widely studied and reviewed, the synthetic strategies towards higher levels of fluorination (levels 2 to 5) are somewhat more limited. This Minireview evaluates and summarizes the progress in the synthesis of highly fluorinated aryl‐S^VI compounds at all levels, discussing synthetic strategies, reactivity, the advantages and disadvantages of the synthetic procedures, the proposed mechanisms, and the potential upcoming opportunities.

Effects of the Chalcogenide Identity in N‐Aryl Phenochalcogenazine Photoredox Catalysts

Phenochalcogenazines such as phenoxazines and phenothiazines have been widely employed as photoredox catalysts (PCs) in small molecule and polymer synthesis. However, the effect of the chalcogenide in these catalysts has not been fully investigated. In this work, a series of four phenochalcogenazines is synthesized to understand how the chalcogenide impacts catalyst properties and performance. Increasing the size of the chalcogenide is found to distort the PC structure, ultimately impacting the properties of each PC. For example, larger chalcogenides destabilize the PC radical cation, possibly resulting in catalyst degradation. In addition, PCs with larger chalcogenides experience increased reorganization during electron transfer, leading to slower electron transfer. Ultimately, catalyst performance is evaluated in organocatalyzed atom transfer radical polymerization and a photooxidation reaction for C(sp²)−N coupling. Results from these experiments highlight that a balance of PC properties is most beneficial for catalysis, including a long‐lived excited state, a stable radical cation, and a low reorganization energy.

Fluorination Reactions at a Platinum Carbene Complex: Reaction Routes to SF3 , S(=O)F and Fluorido Complexes

The electron-rich Pt complex [Pt(IMes)₂ ] (IMes: [1,3-bis(2,4,6-trimethylphenyl)-2-imidazolinylidine]) can be used as precursor for the syntheses of a variety of fluorido ligand containing compounds. The sulfur fluoride SF₄ undergoes a rapid oxidative addition at Pt⁰ to yield trans-[Pt(F)(SF₃ )(IMes)₂ ]. A photolytic reaction of SF₆ at [Pt(IMes)₂ ] in the presence of IMes gave the fluorido complexes trans-[Pt(F)₂ (IMes)₂ ] and trans-[Pt(F)(SF₃ )(IMes)₂ ] along with trans-[Pt(F)(SOF)(IMes)₂ ] and trans-[Pt(F)(IMes')(IMes)] (IMes': cyclometalated IMes ligand), the latter being products produced by reaction with adventitious water. trans-[Pt(F)(SOF)(IMes)₂ ] and trans-[Pt(F)₂ (IMes)₂ ] were synthesized independently by treatment of [Pt(IMes)₂ ] with SOF₂ or XeF₂ . A reaction of [Pt(IMes)₂ ] with a HF source gave trans-[Pt(H)(F)(IMes)₂ ], and an intermediate bifluorido complex trans-[Pt(H)(FHF)(IMes)₂ ] was identified. Compound trans-[Pt(H)(F)(IMes)₂ ] converts in the presence of CsF into trans-[Pt(F)(IMes')(IMes)].

Photoinitiated anti-Hydropentafluorosulfanylation of Terminal Alkynes

A photoinitiated anti-hydropentafluorosulfanylation of terminal alkynes using SF₅ Cl and (TMS)₃ SiH as the hydrogen atom donor is reported. This transformation generates selectively (Z)-(1-alken-1-yl)pentafluoro-λ⁶ -sulfanes (Z:E : >85:15), thus allowing the preparation of this previously unknown geometrical isomer. DFT calculations highlight that the selectivity is due to the intrinsic preference of SF₅ -substituted vinylic radicals to adopt a cis geometry, and to increased steric contacts during the transition structures leading to the minor (E)-products.

Electro-mediated PhotoRedox Catalysis for Selective C(sp3 )-O Cleavages of Phosphinated Alcohols to Carbanions

We report a novel example of electro-mediated photoredox catalysis (e-PRC) in the reductive cleavage of C(sp3 )-O bonds of phosphinated alcohols to alkyl carbanions. As well as deoxygenations, olefinations are reported which are E-selective and can be made Z-selective in a tandem reduction/photosensitization process where both steps are photoelectrochemically promoted. Spectroscopy, computation, and catalyst structural variations reveal that our new naphthalene monoimide-type catalyst allows for an intimate dispersive precomplexation of its radical anion form with the phosphinate substrate, facilitating a reactivity-determining C(sp3 )-O cleavage. Surprisingly and in contrast to previously reported photoexcited radical anion chemistries, our conditions tolerate aryl chlorides/bromides and do not give rise to Birch-type reductions.

Synthetic Molecular Photoelectrochemistry: New Frontiers in Synthetic Applications, Mechanistic Insights and Scalability

Synthetic photoelectrochemistry (PEC) is receiving increasing attention as a new frontier for the generation and handling of reactive intermediates. PEC permits selective single‐electron transfer (SET) reactions in a much greener way and broadens the redox window of possible transformations. Herein, the most recent contributions are reviewed, demonstrating exciting new opportunities, namely, the combination of PEC with other reactivity paradigms (hydrogen‐atom transfer, radical polar crossover, energy transfer sensitization), scalability up to multigram scale, novel selectivities in SET super‐oxidations/reductions and the importance of precomplexation to temporally enable excited radical ion catalysis.

Chemoselective Hydro(Chloro)pentafluorosulfanylation of Diazo Compounds with Pentafluorosulfanyl Chloride

Pentafluorosulfanyl chloride (SF₅ Cl) is the most prevalent reagent for the incorporation of SF₅ group into organic compounds. However, the preparation of SF₅ Cl often relies on hazardous reagents and specialized apparatus. Herein, we described a safe and practical synthesis of a bench-stable and easy-to-handle solution of SF₅ Cl in n-hexane under gas-reagent-free conditions. The synthetic application of SF₅ Cl was demonstrated through the unprecedented reaction with diazo compounds. The chemoselective hydro- and chloropentafluorosulfanylations of α-diazo carbonyl compounds were developed in the presence of K₃ PO₄ or copper catalyst, respectively. These reactions provide a direct and efficient access to various α-pentafluorosulfanyl carbonyl compounds of high value for potential applications.

Photoredox Catalytic Pentafluorosulfanylative Domino Cyclization of α-Substituted Alkenes to Oxaheterocycles by Using SF6

Virtually inert sulfur hexafluoride becomes a precious pentafluorosulfanylation agent, if properly activated by photoredox catalysis, to access α-fluoro and α-alkoxy SF5 -compounds. This advanced protocol converts SF6 in the presence of alkynols as bifunctional C-C- and C-O-bond forming reagents directly into pentafluorosulfanylated oxygen-containing heterocycles in a single step from α-substituted alkenes. The proposed mechanism is supported by theoretical calculations and gives insights not only in the pentafluorosulfanylation step but also into formation of the carbon-carbon bond and is in full agreement with Baldwin's cyclization rules. The key step is a radical type 5-, 6- respectively 7-exo-dig-cyclization. The synthesized oxaheterocycles cannot be simply prepared by other synthetic methods, show a high level of structural complexity and significantly expand the scope of pentafluorosulfanylated building blocks valuable for medicinal and material chemistry.

Non-coordinated and Hydrogen Bonded Phenolate Anions as One-Electron Reducing Agents

In this work, the syntheses of non-coordinated electron-rich phenolate anions via deprotonation of the corresponding alcohols with an extremely powerful perethyl tetraphosphazene base (Schwesinger base) are reported. The application of uncharged phosphazenes renders the selective preparation of anionic phenol-phenolate and phenolate hydrates possible, which allows for the investigation of hydrogen bonding in these species. Hydrogen bonding brings about decreased redox potentials relative to the corresponding non-coordinated phenolate anions. The latter show redox potentials of up to -0.72(1) V vs. SCE, which is comparable to that of zinc metal, thus qualifying their application as organic zinc mimics. We utilized phenolates as reducing agents for the generation of radical anions in addition to the corresponding phenoxyl radicals. A tetracyanoethylene radical anion salt was synthesized and fully characterized as a representative example. We also present the activation of sulfur hexafluoride (SF6 ) with phenolates in a SET reaction, in which the nature of the respective phenolate determines whether simple fluorides or pentafluorosulfanide ([SF5 ]- ) salts are formed.

Non-Coordinated Phenolate Anions and Their Application in SF6 Activation

The reaction of the strong monophosphazene base with the weakly acidic phenol leads to the formation of a phenol-phenolate anion with a moderately strong hydrogen bond. Application of the more powerful tetraphosphazene base (Schwesinger base) renders the isolation of the corresponding salt with a free phenolate anion possible. This compound represents the first species featuring the free phenolate anion [H5 C6 -O]- . The deprotonation of phenol derivatives with tetraphosphazene bases represents a great way for the clean preparation of salts featuring free phenolate anions and in addition allows the selective syntheses of hydrogen bonded phenol-phenolate salts. This work presents a phosphazenium phenolate salt with a redox potential of -0.72 V and its capability for the selective activation of the chemically inert greenhouse gas SF6 . The performed two-electron reduction of SF6 leads to phosphazenium pentafluorosulfanide ([SF5 ]- ) and fluoride salts.

The Supramolecular Structural Chemistry of Pentafluorosulfanyl and Tetrafluorosulfanylene Compounds

The analysis of crystal structures of SF5 - or SF4 -containing molecules revealed that these groups are often surrounded by hydrogen or other fluorine atoms. Even though fluorine prefers F⋅⋅⋅H over F⋅⋅⋅F contacts, the latter appeared to be important in many compounds. In a significant number of datasets, the closest F⋅⋅⋅F contacts are below 95 % of the van der Waals distance of two F atoms. Moreover, a number of repeating structural motifs formed by contacts between SF5 groups was identified, including different supramolecular dimers and infinite chains. Among SF4 -containing molecules, the study focused on SF4 Cl compounds, including the first solid-state structure analyses of these reactive species. Additionally, electrostatic potential surfaces of a series of Ph-SF5 derivatives were calculated, pointing out the substituent influence on the ability of F⋅⋅⋅X contact formation (X=F or other electronegative atom). Interaction energies were calculated for different dimeric arrangements of Ph-SF5 , which were extracted from experimental crystal structure determinations.

Reactivity of Binary and Ternary Sulfur Halides towards Transition-Metal Compounds

Binary sulfur fluorides exhibit an interesting reactivity towards transition metal complexes. They open up routes for the generation of sulfur‐containing building blocks. Often ligands with particular properties can be constructed. This includes their ability to transfer sulfur atoms or polysulfide units as well as fluorination reactions. This Minireview provides an insight into the reactivity of the binary and ternary sulfur halides S₂Cl₂, SCl₂, SF₄, SF₆ and SF₅Cl towards transition‐metal compounds.

Multi-Photon Excitation in Photoredox Catalysis: Concepts, Applications, Methods

The energy of visible photons and the accessible redox potentials of common photocatalysts set thermodynamic limits to photochemical reactions that can be driven by traditional visible-light irradiation. UV excitation can be damaging and induce side reactions, hence visible or even near-IR light is usually preferable. Thus, photochemistry currently faces two divergent challenges, namely the desire to perform ever more thermodynamically demanding reactions with increasingly lower photon energies. The pooling of two low-energy photons can address both challenges simultaneously, and whilst multi-photon spectroscopy is well established, synthetic photoredox chemistry has only recently started to exploit multi-photon processes on the preparative scale. Herein, we have a critical look at currently developed reactions and mechanistic concepts, discuss pertinent experimental methods, and provide an outlook into possible future developments of this rapidly emerging area.