The Electrochemistry of Black Carbons

Strategies for improving cathode electrolyte interphase in high-performance dual-ion batteries

Dual-ion batteries (DIBs) offer high energy density due to the ability to intercalate both anions and cations, thereby increasing the cutoff voltage and battery capacity. Graphite, with its ordered layered structure and cost-effectiveness, is commonly employed as the cathode material for DIBs. However, the discharge capacity of graphite cathodes is relatively low, and their cycling stability is poor, limiting the practical applications of DIBs. The formation of cathode electrolyte interphase (CEI) on the graphite cathode surface is closely related to anion behavior. Constructing a stable cathode electrolyte interface is crucial for improving the stability of anion storage. Therefore, we introduce a series of strategies to enhance the quality of the CEI layer, including additives, binders, main salts or solvents, high-concentration electrolytes, doping elements, artificial CEI, and graphite surface modifications. These strategies improve the CEI by enhancing anion transport rates, increasing anion solvation capabilities, and improving the structural stability of graphite cathodes, which is of profound significance for increasing the capacity and stability of DIBs. This review provides inspiration for future CEI research, encouraging further exploration of resources of CEI components and improvement strategies to further promote the development of DIBs technology.

Unlocking iron metal as a cathode for sustainable Li-ion batteries by an anion solid solution

Traditional cathode chemistry of Li-ion batteries relies on the transport of Li-ions within the solid structures, with the transition metal ions and anions acting as the static components. Here, we demonstrate that a solid solution of F- and PO43- facilitates the reversible conversion of a fine mixture of iron powder, LiF, and Li3PO4 into iron salts. Notably, in its fully lithiated state, we use commercial iron metal powder in this cathode, departing from electrodes that begin with iron salts, such as FeF3. Our results show that Fe-cations and anions of F- and PO43- act as charge carriers in addition to Li-ions during the conversion from iron metal to a solid solution of iron salts. This composite electrode delivers a reversible capacity of up to 368 mAh/g and a specific energy of 940 Wh/kg. Our study underscores the potential of amorphous composites comprising lithium salts as high-energy battery electrodes.

Electrochemistry-Driven Interphase Doubly Protects Graphite Cathodes for Ultralong Life and Fast Charge of Dual-Ion Batteries

Dual-ion batteries (DIBs) with graphite as cathode material, show superiority in terms of sustainability, affordability, and environmental impact over Li-ion batteries that rely on transition-metal based cathodes. However, graphite cathodes severely suffer from poor structural stability during anion storage at high potentials because of the co-intercalation and oxidative decomposition of electrolytes. This work presents an in situ electrochemistry-driven route to create a bifunctional interphase through implantation of diethylenetriaminepenta(methylene-phosphonic acid) (DTPMP) on the surface of graphite particles. The reaction mechanisms and functions of DTPMP are investigated both experimentally and theoretically. The DTPMP-derived interphase not only improves the antioxidative stability of electrolytes but also benefits the desolvation of PF₆ ^- anions, which doubly protect the graphitic structure and give rise to fast-charge and ultralong cycling performance of graphite cathodes in DIBs.

A Combined Raman Spectroscopy and Atomic Force Microscopy System for In Situ and Real-Time Measures in Electrochemical Cells

An innovative and versatile set-up for in situ and real time measures in an electrochemical cell is described. An original coupling between micro-Raman spectroscopy and atomic force microscopy enables one to collect data on opaque electrodes. This system allows for the correlation of topographic images with chemical maps during the charge exchange occurring in oxidation/reduction processes. The proposed set-up plays a crucial role when reactions, both reversible and non-reversible, are studied step by step during electrochemical reactions and/or when local chemical analysis is required.

Methodological Studies of the Mechanism of Anion Insertion in Nanometer-Sized Carbon Micropores

Dual-ion hybrid capacitors (DIHCs) are a promising class of electrochemical energy storage devices intermediate between batteries and supercapacitors, exhibiting both high energy and power density, and generalizable across wide chemistries beyond lithium. In this study, a model carbon framework material with a periodic structure containing exclusively 1.2 nm width pores, zeolite-templated carbon (ZTC), was investigated as the positive electrode for the storage of a range of anions relevant to DIHC chemistries. Screening experiments were carried out across 21 electrolyte compositions within a common stable potential window of 3.0-4.0 V vs. Li/Li⁺ to determine trends in capacity as a function of anion and solvent properties. To achieve fast rate capability, a binary solvent balancing a high dielectric constant with a low viscosity and small molecular size was used; optimized full-cells based on LiPF₆ in binary electrolyte exhibited 146 Wh kg^-1 and >4000 W kg^-1 energy and power densities, respectively.

Li-Ion Transport and Solvation of a Li Salt of Weakly Coordinating Polyanions in Ethylene Carbonate/Dimethyl Carbonate Mixtures

Electrolytes with a high Li-ion transference number (t_Li) have attracted significant attention for the improvement of the rapid charge-discharge performance of Li-ion batteries (LIBs). Nonaqueous polyelectrolyte solutions exhibit high t_Li upon immobilization of the anion on a polymer backbone. However, the transport properties and Li-ion solvation in these media are not fully understood. Here, we investigated the Li salt of a weakly coordinating polyanion, poly[(4-styrenesulfonyl)(trifluoromethanesulfonyl)amide] (poly(LiSTFSA)), in various ethylene carbonate and dimethyl carbonate mixtures. The highest ionic conductivity was unexpectedly observed for the lowest polar mixture at the highest salt concentration despite the low dissociation degree of poly(LiSTFSA). This was attributed to a unique conduction phenomenon resulting from the faster diffusion of transiently solvated Li ions along the interconnected aggregates of polyanion chains. A Li/LiFePO₄ cell using such an electrolyte demonstrated improved rate capability. These results provide insights into a design strategy of nonaqueous liquid electrolytes for LIBs.

A PF6 - -Permselective Polymer Electrolyte with Anion Solvation Regulation Enabling Long-Cycle Dual-Ion Battery

Graphitic carbon that allows reversible anion (de)intercalation is a promising cathode material for cost-efficient and high-voltage dual-ion batteries (DIBs). However, one notorious but overlooked issue is the incomplete interfacial anion desolvation, which not only reduces the oxidative stability of electrolytes, but also results in solvent co-intercalation into graphite layers. Here, an "anion-permselective" polymer electrolyte with abundant cationic quaternary ammonium motif is developed to weaken the PF₆ ^- -solvent interaction and thus facilitates PF₆ ^- desolvation. This strategy significantly inhibits solvent co-intercalation as well as enhances the oxidation resistance of electrolyte, ensuring the structural integrity of graphite. As a result, the as-assembled graphite||Li cell achieves a superior cyclability with an average Coulombic efficiency of 99.0% (vs 95.7% for baseline electrolyte) and 87.1% capacity retention after 2000 cycles even at a high cutoff potential of 5.4 V versus Li⁺ /Li. Besides, this polymer also forms a robust cathode electrolyte interface, working together to enable a long-life DIB. This strategy of tuning anion coordination environment provides a promising solution to regulate solvent co-intercalation chemistry for DIBs.

Online sample pretreatment for analysis of decomposition products in lithium ion battery by liquid chromatography hyphenated with ion trap-time of flight-mass spectrometry or inductively coupled plasma-sector field-mass spectrometry

Lithium ion batteries are essential power sources for mobile electronic devices like cell phones, tablets and increasingly used in the field of electromobility and energy transition. The commonly applied liquid electrolytes in commercial cells contain a conducting salt at relatively high concentration (LiPF₆, ≥1 mol/L). For analytical battery electrolyte investigations, it is necessary to protect the column and mass spectrometer from salt precipitation and clogging. Thus, dilution of the sample is necessary which results in higher limits of detection and limits of quantification. In this study, a comprehensive online sample preparation approach for reversed phase liquid chromatography with an online-solid phase extraction was developed, which allows higher injections volumes and lower dilution factors. For the method development of the online-solid phase extraction, pristine electrolytes were used with trimethyl phosphate and triethyl phosphate as model substances for organo(fluoro)phosphates with weak and strong retention on the extraction column. Organo(fluoro)phosphates are potential hazardous decomposition products, due to their structural similarity to chemical warfare agents like sarin, and therefore their quantification is beneficial for toxicological assessment. The optimization of chromatographic parameters was performed using electrochemically aged electrolytes. For substance independent quantification with a plasma-based technique, an isocratic separation method was implemented. Using optimized conditions, LiPF₆ could be removed quantitatively and the injection volume was increased up to a factor of 50, while the dilution factor could be decreased up to a factor of ten. Eleven different organo(fluoro)phosphates with an overall concentration of 133 mg/kg were found. Therefore, limit of detection and limit of quantification were improved significantly (LOQ: ≤100 µg kg^-1 phosphorus content, LOD: ≤35 µg kg^-1 phosphorus content). In summary, a fast online sample preparation for liquid chromatographic investigations of lithium ion battery electrolytes was implemented, validated on electrochemically aged lithium ion battery electrolyte.

Strategies for Alleviating Electrode Expansion of Graphite Electrodes in Sodium-Ion Batteries Followed by In Situ Electrochemical Dilatometry

The electrochemical intercalation/deintercalation of solvated sodium ions into graphite is a highly reversible process, but leads to large, undesired electrode expansion/shrinkage ("breathing"). Herein, two strategies to mitigate the electrode expansion are studied. Starting with the standard configuration (-) sodium | diglyme (2G) electrolyte | graphite (poly(vinylidene difluoride) (PVDF) binder) (+), the PVDF binder is first replaced with a binder made of the sodium salt of carboxymethyl cellulose (CMC). Second, ethylenediamine (EN) is added to the electrolyte solution as a co-solvent. The electrode breathing is followed in situ (operando) through electrochemical dilatometry (ECD). It is found that replacing PVDF with CMC is only effective in reducing the electrode expansion during initial sodiation. During cycling, the electrode breathing for both binders is comparable. Much more effective is the addition of EN. The addition of 10 v/v EN to the diglyme electrolyte strongly reduces the electrode expansion during the initial sodiation (+100% with EN versus +175% without EN) as well as the breathing during cycling. A more detailed analysis of the ECD signals reveals that solvent co-intercalation temporarily leads to pillaring of the graphite lattice and that the addition of EN to 2G leads to a change in the sodium storage mechanism.

How has external knowledge contributed to lithium-ion batteries for the energy transition?

Innovation in clean-energy technologies is central toward a net-zero energy system. One key determinant of technological innovation is the integration of external knowledge, i.e., knowledge spillovers. However, extant work does not explain how individual spillovers come about: the mechanisms and enablers of these spillovers. We ask how knowledge from other technologies, sectors, or scientific disciplines is integrated into the innovation process in an important technology for a net-zero future: lithium-ion batteries (LIBs), based on a qualitative case study using extant literature and an elite interview campaign with key inventors in the LIB field and R&D/industry experts. We identify the breakthrough innovations in LIBs, discuss the extent to which breakthrough innovations-plus a few others-have resulted from spillovers, and identify different mechanisms and enablers underlying these spillovers, which can be leveraged by policymakers and R&D managers who are interested in facilitating spillovers in LIBs and other clean-energy technologies.

Electrochemical properties of vertically aligned graphenes: tailoring heterogeneous electron transfer through manipulation of the carbon microstructure

The electrochemical response of different morphologies (microstructures) of vertically aligned graphene (VG) configurations is reported. Electrochemical properties are analysed using the outer-sphere redox probes Ru(NH3)6 2+/3+ (RuHex) and N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD), with performances de-convoluted via accompanying physicochemical characterisation (Raman, TEM, SEM, AFM and XPS). The VG electrodes are fabricated using an electron cyclotron resonance chemical vapour deposition (ECR-CVD) methodology, creating vertical graphene with a range of differing heights, spacing and edge plane like-sites/defects (supported upon underlying SiO2/Si). We correlate the electrochemical reactivity/response of these novel VG configurations with the level of edge plane sites (%-edge) comprising their structure and calculate corresponding heterogeneous electron transfer (HET) rates, k 0. Taller VG structures with more condensed layer stacking (hence a larger global coverage of exposed edge plane sites) are shown to exhibit improved HET kinetics, supporting the claims that edge plane sites are the predominant source of electron transfer in carbon materials. A measured k 0 eff of ca. 4.00 × 10-3 cm s-1 (corresponding to an exposed surface coverage of active edge plane like-sites/defects (% θ edge) of 1.00%) was evident for the tallest and most closely stacked VG sample, with the inverse case true, where a VG electrode possessing large inter-aligned-graphene spacing and small flake heights exhibited only 0.08% of % θ edge and a k 0 eff value one order of magnitude slower at ca. 3.05 × 10-4 cm s-1. Control experiments are provided with conventional CVD (horizontal) grown graphene and the edge plane of highly ordered pyrolytic graphite (EPPG of HOPG), demonstrating that the novel VG electrodes exhibit ca. 3× faster k 0 than horizontal CVD graphene. EPPG exhibited the fastest HET kinetics, exhibiting ca. 2× larger k 0 than the best VG. These results are of significance to those working in the field of 2D-carbon electrochemistry and materials scientists, providing evidence that the macroscale electrochemical response of carbon-based electrodes is dependent on the edge plane content and showing that a range of structural configurations can be employed for tailored properties and applications.

Chemical and electrochemical synthesis of graphene oxide - a generalized view

Graphene oxide (GO) is a water soluble carbon material in general, suitable for applications in electronics, the environment, and biomedicine. GO is produced by oxidation of abundantly available graphite, turning black graphite into water-dispersible single layers of functionalized graphene-related materials. Therefore, oxidation gives chemicals access to the complete surface area of GO. These fundamentals have led to a rich chemistry of GO. Here, we review the progress made in controlling the synthesis of GO, introduce the current structural models used to explain the phenomena and present versatile strategies to functionalize the surface of GO. Finally, an outlook is given for future directions.

Galvanically Stimulated Degradation of Carbon-Fiber Reinforced Polymer Composites: A Critical Review

Carbon is used as a reinforcing phase in carbon-fiber reinforced polymer composites employed in aeronautical and other technological applications. Under polarization in aqueous media, which can occur on galvanic coupling of carbon-fiber reinforced polymers (CFRP) with metals in multi-material structures, degradation of the composite occurs. These degradative processes are intimately linked with the electrically conductive nature and surface chemistry of carbon. This review highlights the potential corrosion challenges in multi-material combinations containing carbon-fiber reinforced polymers, the surface chemistry of carbon, its plausible effects on the electrochemical activity of carbon, and consequently the degradation processes on carbon-fiber reinforced polymers. The implications of the emerging use of conductive nano-fillers (carbon nanotubes and carbon nanofibers) in the modification of CFRPs on galvanically stimulated degradation of CFRP is accentuated. The problem of galvanic coupling of CFRP with selected metals is set into perspective, and insights on potential methods for mitigation and monitoring the degradative processes in these composites are highlighted.

Intercalation chemistry of graphite: alkali metal ions and beyond

This review compares the intercalation behaviors of alkali metal ions in graphite, offers insight for the host-guest interaction mechanisms, and expands the intercalation chemistry of pure ions to complex anions, ion-solvent, and multivalent ions.

A new HILIC-ICP-SF-MS method for the quantification of organo(fluoro)phosphates as decomposition products of lithium ion battery electrolytes

The lithium ion battery (LIB) is the most popular choice for powering consumer electronics, grid storage and electric vehicles. Decomposition reactions in LIBs, leading to so-called aging, are the main reason for loss of capacity and power and will affect LIB safety. Organo(fluoro)phosphates (O(F)Ps) as decomposition products of LIB electrolytes have been identified in several studies in the literature but quantitative data of O(F)Ps in LIBs are only scarcely available. In terms of toxicity, this substance class is highly relevant as it shows structural similarities to chemical warfare agents. Thus, approaches that can deliver quantitative data are in need. In this study, acidic O(F)Ps were quantified with an inductively coupled plasma-sector field-mass spectrometer (ICP-SF-MS) after separation of species with hydrophilic interaction liquid chromatography (HILIC). The formation of OFPs exceeds the amount of non-fluorine containing OPs by a factor of up to 15. A total of 16 different O(F)P compounds could successfully be quantified. Organic mass spectrometry was used for the assignment of quantitative data.

The lithium ion battery (LIB) is the most popular choice for powering consumer electronics, grid storage and electric vehicles.

Potassium Dual-Ion Hybrid Batteries with Ultrahigh Rate Performance and Excellent Cycling Stability

Potassium-ion batteries (KIBs) are regarded as a potential alternative battery technology to conventional lithium-ion batteries owing to their low potential, natural abundance, and the low cost of potassium. However, sluggish reaction kinetic of the much larger K⁺ ions leads to low rate capability and poor cycling performance of KIBs, restricting KIB's practical applications. Herein, we propose a novel full battery called a potassium dual-ion hybrid battery (KDHB) by employing an absorption-type hierarchical porous carbon as the anode material and an anion intercalation-type expanded graphite (EG) as the cathode material. Owing to the hybrid mechanism of the battery and capacitive reaction, the KDHB exhibits superior rate performance with a high capacity of 82 mA h g^-1 even at a high current density of 3 A g^-1 with negligible capacity decay. Moreover, the KDHB exhibits excellent cycling performance with 74.2% capacity retention after 2000 cycles at 1 A g^-1, which is so far the best performance of the reported KDIBs.

Ionic liquids and derived materials for lithium and sodium batteries

A comprehensive review of various applications of ionic liquids and derived materials in lithium and sodium batteries with an emphasis on recent advances.

A facile electrochemical intercalation and microwave assisted exfoliation methodology applied to screen-printed electrochemical-based sensing platforms to impart improved electroanalytical outputs

An Electrochemical Derived Intercalation process is explored as a modification for screen-printed electrodes to improve their electroanalytical outputs.

Intercalation events visualized in single microcrystals of graphite

The electrochemical intercalation of layered materials, particularly graphite, is fundamental to the operation of rechargeable energy-storage devices such as the lithium-ion battery and the carbon-enhanced lead-acid battery. Intercalation is thought to proceed in discrete stages, where each stage represents a specific structure and stoichiometry of the intercalant relative to the host. However, the three-dimensional structures of the stages between unintercalated and fully intercalated are not known, and the dynamics of the transitions between stages are not understood. Using optical and scanning transmission electron microscopy, we video the intercalation of single microcrystals of graphite in concentrated sulfuric acid. Here we find that intercalation charge transfer proceeds through highly variable current pulses that, although directly associated with structural changes, do not match the expectations of the classical theories. Evidently random nanoscopic defects dominate the dynamics of intercalation.

The common lithium-ion battery is re-charged by intercalating its graphite anode, but intercalation remains not well understood. Electron microscope video of intercalating graphite microcrystals reveals that the charge transfer occurs in current pulses that do not match theoretical expectations.

A Novel Ultrafast Rechargeable Multi-Ions Battery

An ultrafast rechargeable multi-ions battery is presented, in which multi-ions can electrochemically intercalate into graphite layers, exhibiting a high reversible discharge capacity of ≈100 mAh g^-1 and a Coulombic efficiency of ≈99% over hundreds of cycles at a high current density. The results may open up a new paradigm for multi-ions-based electrochemical battery technologies and applications.

Temporal analysis of blister evolution during anion intercalation in graphite

The anion intercalation timing in graphite is disclosed and a new blister precursor phase is observed at the oxygen over-potential.

The staging mechanism of AlCl4 intercalation in a graphite electrode for an aluminium-ion battery

Identifying a suitable electrode material with desirable electrochemical properties remains a primary challenge for rechargeable Al-ion batteries.

A comparative study on the impact of different glymes and their derivatives as electrolyte solvents for graphite co-intercalation electrodes in lithium-ion and sodium-ion batteries

The effect of solvent composition on the redox activity of co-intercalation graphite electrodes is comprehensively discussed.

Carbon-Based Materials for Lithium-Ion Batteries, Electrochemical Capacitors, and Their Hybrid Devices

A rapidly developing market for portable electronic devices and hybrid electrical vehicles requires an urgent supply of mature energy-storage systems. As a result, lithium-ion batteries and electrochemical capacitors have lately attracted broad attention. Nevertheless, it is well known that both devices have their own drawbacks. With the fast development of nanoscience and nanotechnology, various structures and materials have been proposed to overcome the deficiencies of both devices to improve their electrochemical performance further. In this Review, electrochemical storage mechanisms based on carbon materials for both lithium-ion batteries and electrochemical capacitors are introduced. Non-faradic processes (electric double-layer capacitance) and faradic reactions (pseudocapacitance and intercalation) are generally explained. Electrochemical performance based on different types of electrolytes is briefly reviewed. Furthermore, impedance behavior based on Nyquist plots is discussed. We demonstrate the influence of cell conductivity, electrode/electrolyte interface, and ion diffusion on impedance performance. We illustrate that relaxation time, which is closely related to ion diffusion, can be extracted from Nyquist plots and compared between lithium-ion batteries and electrochemical capacitors. Finally, recent progress in the design of anodes for lithium-ion batteries, electrochemical capacitors, and their hybrid devices based on carbonaceous materials are reviewed. Challenges and future perspectives are further discussed.

How to get between the sheets: a review of recent works on the electrochemical exfoliation of graphene materials from bulk graphite

Since the beginning of the 'graphene era' post-2004, there has been significant interest in developing a high purity, high yield, and scalable fabrication route toward graphene materials for both primary research purposes and industrial production. One suitable approach to graphene production lies in the realm of electrochemical exfoliation, in which a potential difference is applied between a graphite anode/cathode in the presence of an electrolyte-containing medium. Herein we review various works on the electrochemical fabrication of graphene materials specifically through the use of electrochemical intercalation and exfoliation of a graphite source electrode, focusing on the quality and purity of products formed. We categorise the most significant works in terms of anodic and cathodic control, highlighting the merits of the respective approaches, as well as indicating the challenges associated with both procedures.

Development of a novel voltammetric sensor for the determination of methamphetamine in biological samples on the pretreated pencil graphite electrode

We developed a simple and reliable sensor for the determination of methamphetamine without expensive and time-consuming pretreatments using PPGE.

Preparation of Metal-Free Nitrogen-Doped Graphene Via Direct Electrochemical Exfoliation of Graphite in Ammonium Nitrate

Nitrogen-doped graphene (N-graphene) nanosheets have been synthesized via electrochemical intercalation and exfoliation of graphite rods in ammonium nitrate aqueous solutions. This method produces N-graphene free from possible metal contaminations that can be utilized as efficient electrocatalysts towards oxygen reduction reactions.