Control of the Coil-to-Globule Transition and Ultrahigh Mechanical Properties of PNIPA in Nanocomposite Hydrogels

Advances in enhancing the mechanical properties of biopolymer hydrogels via multi-strategic approaches

The limited mechanical properties of biopolymer-based hydrogels have hindered their widespread applications in biomedicine and tissue engineering. In recent years, researchers have shown significant interest in developing novel approaches to enhance the mechanical performance of hydrogels. This review focuses on key strategies for enhancing mechanical properties of hydrogels, including dual-crosslinking, double networks, and nanocomposite hydrogels, with a comprehensive analysis of their underlying mechanisms, benefits, and limitations. It also introduces the classic application scenarios of biopolymer-based hydrogels and the direction of future research efforts, including wound dressings and tissue engineering based on 3D bioprinting. This review is expected to deepen the understanding of the structure-mechanical performance-function relationship of hydrogels and guide the further study of their biomedical applications.

Wearable Sensor Based on a Tough Conductive Gel for Real-Time and Remote Human Motion Monitoring

The usage of a conductive hydrogel in wearable sensors has been thoroughly researched recently. Nonetheless, hydrogel-based sensors cannot simultaneously have excellent mechanical property, high sensitivity, comfortable wearability, and rapid self-healing performance, which result in poor durability and reusability. Herein, a robust conductive hydrogel derived from one-pot polymerization and subsequent solvent replacement is developed as a wearable sensor. Owing to the reversible hydrogen bonds cross-linked between polymer chains and clay nanosheets, the resulting conductive hydrogel-based sensor exhibits outstanding flexibility, self-repairing, and fatigue resistance performances. The embedding of graphene oxide nanosheets offers an enhanced hydrogel network and easy release of wearable sensor from the target position through remote irradiation, while Li+ ions incorporated by solvent replacement endow the wearable sensor with low detection limit (sensing strain: 1%), high conductivity (4.3 S m-1) and sensitivity (gauge factor: 3.04), good freezing resistance, and water retention. Therefore, the fabricated wearable sensor is suitable to monitor small and large human motions on the site and remotely under subzero (-54 °C) or room temperature, indicating lots of promising applications in human-motion monitoring, information encryption and identification, and electronic skins.

Hydrogel-enabled mechanically active wound dressings

Wound care is a major clinical and social concern. However, effective wound repair remains challenging where conventional dressings yield detrimental healing outcomes. An emerging technique, named mechanically active dressing (MAD), uses self-contractile hydrogels to mechanically contract the wound bed. MAD has shown improved healing rates with limited side effects. These promising developments in wound care call for a timely review on the development of such technology. Herein, we shed light on the mechanism underlying mechanically modulated wound healing, carry out a systematic discussion on the status quo of designing hydrogels for MAD fabrication, and conclude with perspectives on design, use and clinical translation for realizing the future goal of personalized wound care.

Nanocomposite Organogel for Art Conservation─A Novel Wax Resin Removal System

We describe a new, safe, and effective method for removing wax resin adhesive from the canvases of paintings conserved by the once widely used Dutch Method, which involved attaching a new canvas to the back of a painting using an adhesive made of beeswax and natural resin. First, a low-toxicity cleaning mixture for dissolving the adhesive and removing it from the canvases was developed, and then a nanocomposited organogel was obtained. The ability of the organogel to remove the adhesive from canvases was investigated on the lining of the 1878 painting "Battle of Grunwald" by Jan Matejko, with promising results. Additionally, we found that the organogel can be used several times with no visible loss of cleaning ability. Finally, the effectiveness and safety of the method were confirmed on two oil paintings (one from the National Museum in Warsaw): all the wax resin adhesive was removed and the painting regained its original brightness and vivid colors.

Recent developments of polysaccharide based superabsorbent nanocomposite for organic dye contamination removal from wastewater - A review

One of the main problems with water pollution is dye contamination of rivers, industrial effluents, and water sources. It has endangered the world's sources of drinking water. Several remediation strategies have been carefully developed and tested to minimize this ominous picture. Due to their appealing practical and financial benefits, adsorption methods in particular are often listed as one of the most popular solutions to remediate dye-contaminated water. Biopolymer-based hydrogel nanocomposites are a cutting-edge class of materials with a wide range of applications that are effective in removing organic dyes from the environment. Since the incorporation of various materials into hydrogel matrices generated composite materials with distinct characteristics, these unique materials were often alluded to as ideal adsorbents. The fundamental emphasis of the conceptual and critical review of the literature in this research is the significant potential of hydrogel nanocomposites (HNCs) to remediate dye-contaminated water (especially for articles from the previous five years). The review also provides knowledge for the development of biopolymer-based HNCs, prospects, and opportunities for future research. It is also focused on optimum conditions for dye adsorption processes along with their adsorption kinetics and isotherm models. In summary, the information gained in this review research may contribute to a strengthened scientific rationale for the practical and efficient application of these novel adsorbent materials.

A Review on Novel Channel Materials for Particle Image Velocimetry Measurements-Usability of Hydrogels in Cardiovascular Applications

Particle image velocimetry (PIV) is an optical and contactless measurement method for analyzing fluid blood dynamics in cardiovascular research. The main challenge to visualization investigated in the current research was matching the channel material’s index of refraction (IOR) to that of the fluid. Silicone is typically used as a channel material for these applications, so optical matching cannot be proven. This review considers hydrogel as a new PIV channel material for IOR matching. The advantages of hydrogels are their optical and mechanical properties. Hydrogels swell more than 90 vol% when hydrated in an aqueous solution and have an elastic behavior. This paper aimed to review single, double, and triple networks and nanocomposite hydrogels with suitable optical and mechanical properties to be used as PIV channel material, with a focus on cardiovascular applications. The properties are summarized in seven hydrogel groups: PAMPS, PAA, PVA, PAAm, PEG and PEO, PSA, and PNIPA. The reliability of the optical properties is related to low IORs, which allow higher light transmission. On the other hand, elastic modulus, tensile/compressive stress, and nominal tensile/compressive strain are higher for multiple-cross-linked and nanocomposite hydrogels than single mono-cross-linked gels. This review describes methods for measuring optical and mechanical properties, e.g., refractometry and mechanical testing.

Skin-like hydrogel devices for wearable sensing, soft robotics and beyond

Skin-like electronics are developing rapidly to realize a variety of applications such as wearable sensing and soft robotics. Hydrogels, as soft biomaterials, have been studied intensively for skin-like electronic utilities due to their unique features such as softness, wetness, biocompatibility and ionic sensing capability. These features could potentially blur the gap between soft biological systems and hard artificial machines. However, the development of skin-like hydrogel devices is still in its infancy and faces challenges including limited functionality, low ambient stability, poor surface adhesion, and relatively high power consumption (as ionic sensors). This review aims to summarize current development of skin-inspired hydrogel devices to address these challenges. We first conduct an overview of hydrogels and existing strategies to increase their toughness and conductivity. Next, we describe current approaches to leverage hydrogel devices with advanced merits including anti-dehydration, anti-freezing, and adhesion. Thereafter, we highlight state-of-the-art skin-like hydrogel devices for applications including wearable electronics, soft robotics, and energy harvesting. Finally, we conclude and outline the future trends.

Facile preparation of layered double hydroxide (LDH)-alginate beads as sustainable system for the triggered release of diclofenac: Effect of pH and temperature on release rate

This paper concerns the facile preparation of alginate beads encapsulating layered double hydroxide (LDH) intercalated with diclofenac sodium as drug delivery systems. To better evaluate the effect of LDH carrier, alginate beads loaded with free diclofenac were also prepared. Composites hydrogel beads were ionotropically crosslinked in CaCl₂ solution at 4 °C. Thermal and barrier properties were evaluated and correlated with the presence of the inorganic phase. Swelling behavior was investigated over time. Release kinetics of diclofenac at different pH and temperatures were evaluated. The diclofenac release behavior appeared to be affected by the presence of LDH, the pH of release medium and the temperature allowing for fabricating a sustainable composite characterized by a triggered drug release rate. Finally, empirical relationships correlating the drug diffusion as a function of temperature and pH were extrapolated.

Bioinspired organohydrogels with heterostructures: Fabrications, performances, and applications

Since emerging in 1960, the artificial hydrogels have garnered enormous attentions in scientific community due to their high level of similarities to biological soft tissues in both structures and properties. With the proceeding of research, the concern of hydrogels is gradually shifted from fundamental investigation to abundant functionalization. In contrast to the natural soft tissues, the current artificial hydrogels still possess relatively simple structures and unsatisfactory environmental adaptability, extremely limiting their practical applications in complex environments. Enlightened by the prominent adaptability of biological organisms, the binary cooperative complementary principle is utilized to develop bioinspired organohydrogels by combining two components with opposite but cooperative physiochemical features. The present review provides the advanced progresses of bioinspired organohydrogels with sophisticated heterogeneous networks and desirably environmental adaptabilities. We clearly summarize the synthesizing strategies in regard to both corresponding mechanisms and typical examples, including macroscopic organohydrogels, organohydrogels with binary solvent, organohydrogels with heteronetworks, and emulsion-based organohydrogels. Meanwhile, the intriguing features of the reported organohydrogels, such as temperature resistance, switchable mechanics, adaptive wettability, and opposite components compatibility, are also clearly highlighted with a short overview of their promising applications. Ultimately, the current challenges and perspectives on the future development of bioinspired organohydrogels are also discussed.

Hetero-network hydrogels crosslinked with silica nanoparticles for strategic control of thermal responsive property

Two thermoresponsive copolymers with different lower critical solution temperatures (LCSTs) were crosslinked using silica nanoparticles to afford hybrid hydrogels exhibiting two distinct thermo-responsivities. The thermo-responsive copolymers were synthesised by free radical polymerisation from a monomer with a reactive side chain (3-methacryloxypropyl trimethoxysilane (S)) and water-soluble monomers with different thermo-responsivities (N-isopropyl acrylamide (N) or N-(3-methoxy propyl)acrylamide (M)). The obtained reactive copolymers, poly(N-isopropyl acrylamide-co-3-methacryloxypropyl trimethoxysilane) (pNS) and poly(N-(3-methoxy propyl acrylamide-co-3-methacryloxypropyl trimethoxysilane)) (pMS), were characterized by multiple techniques including 1H NMR and FTIR spectroscopy. The hetero-network hybrid hydrogels were easily prepared by mixing aqueous solutions of the copolymer with an aqueous colloidal silica suspension; their gelation properties could be tuned by varying the amounts of pNS, pMS, and Si. Differential scanning calorimetric analysis showed that the hetero-network hydrogel exhibited a critical two-step phase transition at temperatures around the LCST of each copolymer (33 °C for pNS, 73 °C for pMS), indicating that each polymer does not disturb the phase transitions of the other. The deswelling of the hetero-network hydrogel could be controlled with respect to temperature and time.

Adjustable dual temperature-sensitive hydrogel based on a self-assembly cross-linking strategy with highly stretchable and healable properties

Developing smart temperature-sensitive hydrogels with a wide response range and highly stretchable and healable properties for simulation of the temperature perception function of human skin remains a great challenge. Here, a novel PNIPAm/PNAGA double-network hydrogel was developed by a self-assembly cross-linking strategy to achieve this goal. Benefiting from the double-network structure and a large number of multiple hydrogen bond interactions between the PNIPAm and PNAGA, the PNIPAm/PNAGA hydrogel realizes wide and adjustable dual temperature response behaviors of 0-32.5 °C (LCST) and 32.5-65 °C (UCST) and exhibits extraordinary mechanical properties with a maximum tensile strength of 51.48 kPa, elongation at break over 1400%, compressive stress over 1 MPa, and Young's modulus approximately 5.51 kPa, and excellent healable properties of nearly 100% temperature-sensitive repair rate. To the best of our knowledge, this is the highest mechanical strength of the reported PNIPNm-based dual temperature-sensitive hydrogels and simultaneously achieved the healable performance of dual temperature-sensitive hydrogels for the first time. The PNIPAm/PNAGA hydrogel displayed superior capability for simulation of the human skin to monitor various ambient temperatures, such as human skin temperature, hot and cold water, a refrigerator, room temperature and oven temperature, indicating promising applications in the fields of electronic skin, wearable device, bionics, etc.

Bioinspired high-power-density strong contractile hydrogel by programmable elastic recoil

Stimuli-responsive hydrogels have large deformability but-when applied as actuators, smart switch, and artificial muscles-suffer from low work density due to low deliverable forces (~2 kPa) and speed through the osmotic pressure-driven actuation. Inspired by the energy conversion mechanism of many creatures during jumping, we designed an elastic-driven strong contractile hydrogel through storing and releasing elastic potential energy in polymer network. It can generate high contractile force (40 kPa) rapidly at ultrahigh work density (15.3 kJ/m³), outperforming current hydrogels (~0.01 kJ/m³) and even biological muscles (~8 kJ/m³). This demonstrated elastic energy storing and releasing method endows hydrogels with elasticity-plasticity switchability, multi-stable deformability in fully reversible and programmable manners, and anisotropic or isotropic deformation. With the high power density and programmability via this customizable modular design, these hydrogels demonstrated potential for broad applications in artificial muscles, contractile wound dressing, and high-power actuators.

Novel Nanocomposites Based on Functionalized Magnetic Nanoparticles and Polyacrylamide: Preparation and Complex Characterization

This paper reports the synthesis and complex characterization of nanocomposite hydrogels based on polyacrylamide and functionalized magnetite nanoparticles. Magnetic nanoparticles were functionalized with double bonds by 3-trimethoxysilyl propyl methacrylate. Nanocomposite hydrogels were prepared by radical polymerization of acrylamide monomer and double bond modified magnetite nanoparticles. XPS spectra for magnetite and modified magnetite were recorded to evaluate the covalent bonding of silane modifying agent. Swelling measurements in saline solution were performed to evaluate the behavior of these hydrogels having various compositions. Mechanical properties were evaluated by dynamic rheological analysis for elastic modulus and vibrating sample magnetometry was used to investigate the magnetic properties. Morphology, geometrical evaluation (size and shape) of nanostructural characteristics and the crystalline structure of the samples were investigated by SEM, HR-TEM and selected area electron diffraction (SAED). The nanocomposite hydrogels will be further tested for the soft tissue engineering field as repairing scaffolds, due to their mechanical and magnetization behavior that can stimulate tissue regeneration.

Nanocomposite Hydrogels with Optic-Sonic Transparency and Hydroacoustic-Sensitive Conductivity for Potential Antiscouting Sonar

In this paper, we report on the design and simple fabrication of novel nanocomposite hydrogels with optic-sonic transparency and hydroacoustic-sensitive conductivity. The proposed nanocomposite hydrogels are constructed by poly( N, N-dimethylacrylamide) and exfoliated Laponite clay nanosheets via free radical polymerization. With lithium chloride (LiCl) as ionic additives inside the polymeric networks of the hydrogels, the lithium cations (Li⁺) could be stored on and in the clay nanosheets owing to the electrostatic adsorption and cation exchange. Triggered by hydroacoustic wave oscillation, the stored Li⁺ ions could escape from the clay nanosheets, resulting in the augmentation of ionic concentration inside the polymeric networks and thus the increase of the conductivity of the nanocomposite hydrogel. Inversely, upon removing the hydroacoustic signals, the Li⁺ ions could be readsorbed again by the clay nanosheets; as a result, the conductivity of the nanocomposite hydrogel decreases again. Moreover, the fabricated nanocomposite hydrogels also feature high stretchability and spliceable and antifreezing properties. Such novel nanocomposite hydrogels are highly promising for development of systems for camouflaging and sensing sonar scanning.

Molecular simulation of structures and mechanical properties of nanocomposite networks consisting of disk-shaped particles and polymers

We study the structures and the mechanical properties of nanocomposite networks consisting of disk-shaped particles and polymers by a coarse-grained molecular dynamics simulation. The disk-shaped particles and the polymers form tightly cross-linked network structures by the polymer adsorption on the disk-shaped particles and show high mechanical strength. We confirm the significance of the high polymerization degree for the large fracture elongations. Under the uniaxial elongation, at low elongation ratios, the networks maintain the cross-linked structures and indicate the sharp increase of the stress with the elongation. At large elongation ratios, the number of bridge chains decreases by the peeling of the adsorbed polymers from the disk-shaped particles. The decline of the bridge chains suppresses the increment of the stress. The orientation of the disk-shaped particles saturates prior to that of the polymers because of the slow orientation of the non-bridge chains. These results are consistent with reported experimental results.

Nanocomposite Hydrogels: Advances in Nanofillers Used for Nanomedicine

The ongoing progress in the development of hydrogel technology has led to the emergence of materials with unique features and applications in medicine. The innovations behind the invention of nanocomposite hydrogels include new approaches towards synthesizing and modifying the hydrogels using diverse nanofillers synergistically with conventional polymeric hydrogel matrices. The present review focuses on the unique features of various important nanofillers used to develop nanocomposite hydrogels and the ongoing development of newly hydrogel systems designed using these nanofillers. This article gives an insight in the advancement of nanocomposite hydrogels for nanomedicine.

Facile fabrication of thermo/redox responsive hydrogels based on a dual crosslinked matrix for a smart on-off switch

Stimuli-responsive or "smart" soft materials have raised considerable attention due to their ability to spontaneously respond to external environmental variations and have a great potential for wide applications. Herein, a thermo/redox responsive hydrogel is facilely constructed based on a dual crosslinked matrix: the primary chemical crosslinked copolymer is composed of thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) and poly(ionic liquid), and the secondary physical crosslinking component is generated by the ionic coordination between iron ions and carboxyl groups in the poly(ionic liquid). The non-covalent ion coordination crosslinking is introduced into a covalently crosslinked network, which further strengthens the soft PNIPAM matrix and enhances the mechanical performances of the hydrogels. The excellent thermosensitivity of PNIPAM and the good conductive property of poly(ionic liquid) provide the hydrogel with an attractive performance as a thermo-responsive switch. Moreover, the trapped iron ions in the network endow the hydrogels with redox-responsiveness, which could be reversibly chemically oxidized and reduced. The mechanical strength of hydrogels could also be tuned by the crosslinked capacity of iron ions within the gel matrix between the strong binding of the oxidized state (Fe3+) and poor coordination of the reduced state (Fe2+). These stimuli-responsive hydrogels have the potential to be used as smart materials for stimuli-responsive devices.

Advances in Carbon Nanotubes-Hydrogel Hybrids in Nanomedicine for Therapeutics

In spite of significant advancement in hydrogel technology, low mechanical strength and lack of electrical conductivity have limited their next-level biomedical applications for skeletal muscles, cardiac and neural cells. Host-guest chemistry based hybrid nanocomposites systems have gained attention as they completely overcome these pitfalls and generate bioscaffolds with tunable electrical and mechanical characteristics. In recent years, carbon nanotube (CNT)-based hybrid hydrogels have emerged as innovative candidates with diverse applications in regenerative medicines, tissue engineering, drug delivery devices, implantable devices, biosensing, and biorobotics. This article is an attempt to recapitulate the advancement in synthesis and characterization of hybrid hydrogels and provide deep insights toward their functioning and success as biomedical devices. The improved comparative performance and biocompatibility of CNT-hydrogels hybrids systems developed for targeted biomedical applications are addressed here. Recent updates toward diverse applications and limitations of CNT hybrid hydrogels is the strength of the review. This will provide a holistic approach toward understanding of CNT-based hydrogels and their applications in nanotheranostics.

Reversible generation of large retractive tensile forces in isometric chemo-mechanical actuators composed of nanocomposite hydrogels and aqueous NaCl solutions

This article addresses the generation of large mechanical forces in muscle-like isometric actuator systems composed of stimuli-responsive nanocomposite hydrogels (NC gels) and aqueous NaCl solutions. NC gels with poly(N-isopropylacrylamide)-clay (PNIPA-clay) network structures exhibit high mechanical toughnesses and reversible swelling/deswelling behavior in the absence/presence of NaCl. NC gels constrained to constant lengths in brine generate enhanced contractive forces due to the salt-induced coil-to-globule transitions that are more than ten times larger than those induced thermally. A retractive tensile force (4 N/170 kPa), comparable to that of human muscle, was repeatedly generated at 20 °C using an appropriately composed NC gel (clay: 2 mol%, PNIPA: 2 M), and by alternating the NaCl concentration between 0 and 5 M. This phenomenon is attributed to the combined effects of enhanced deswelling behavior resulting from the salt-induced coil-to-globule transition of PNIPA and the high stiffness of the deswollen gel due to the NaCl-strengthened PNIPA-clay network.

All-in-One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels

Cellulose nanocrystals (CNCs) with >2000 photoactive groups on each can act as highly efficient initiators for radical polymerizations, cross-linkers, as well as covalently embedded nanofillers for nanocomposite hydrogels. This is achieved by a simple and reliable method for surface modification of CNCs with a photoactive bis(acyl)phosphane oxide derivative. Shape-persistent and free-standing 3D structured objects were printed with a mono-functional methacrylate, showing a superior swelling capacity and improved mechanical properties.

High strength and anti-fatigue nanocomposite hydrogels prepared via self-initiated free radical polymerization triggered by daylight

A new type of high strength nanocomposite hydrogel was synthesized using TiO₂ nanoparticles as both cross-linkers and photo-initiators under daylight.

Bioinspired Nanocomposite Hydrogels with Highly Ordered Structures

In the human body, many soft tissues with hierarchically ordered composite structures, such as cartilage, skeletal muscle, the corneas, and blood vessels, exhibit highly anisotropic mechanical strength and functionality to adapt to complex environments. In artificial soft materials, hydrogels are analogous to these biological soft tissues due to their "soft and wet" properties, their biocompatibility, and their elastic performance. However, conventional hydrogel materials with unordered homogeneous structures inevitably lack high mechanical properties and anisotropic functional performances; thus, their further application is limited. Inspired by biological soft tissues with well-ordered structures, researchers have increasingly investigated highly ordered nanocomposite hydrogels as functional biological engineering soft materials with unique mechanical, optical, and biological properties. These hydrogels incorporate long-range ordered nanocomposite structures within hydrogel network matrixes. Here, the critical design criteria and the state-of-the-art fabrication strategies of nanocomposite hydrogels with highly ordered structures are systemically reviewed. Then, recent progress in applications in the fields of soft actuators, tissue engineering, and sensors is highlighted. The future development and prospective application of highly ordered nanocomposite hydrogels are also discussed.

Dually responsive mesoporous silica nanoparticles regulated by upper critical solution temperature polymers for intracellular drug delivery

We synthesized a new type of upper critical solution temperature (UCST) thermally responsive polymers (TRPs) with varying responsive temperatures (cloud points). We then grafted one of the TRPs with a cloud point of 42°C on the surface of mesoporous silica nanoparticles (MSN) using disulfide bonds to achieve a novel, dual responsive release system. With this system, the cargo release profiles are responsive to both temperature and reducing agents. When loaded with doxorubicin hydrochloride (DOX), the system could deliver DOX into breast cancer cells (SK-BR-3) in a controlled fashion and present high toxicity.

A self-healable and tough nanocomposite hydrogel crosslinked by novel ultrasmall aluminum hydroxide nanoparticles

Self-healing hydrogels like tissues or organs which are repaired automatically in response to damage show great promise. However, it remains a challenge to develop novel functional nanoparticles as crosslinkers to prepare tough and self-healing nanocomposite hydrogels. Here, we report the preparation of water-soluble ultrasmall aluminum hydroxide nanoparticles with a diameter of 2-3 nm through a simple sol-gel method. Furthermore, a tough nanocomposite hydrogel is prepared by the in situ copolymerization of acylamide and 2-acrylamido-2-methyl propane sulfonic acid in the presence of aluminum hydroxide nanoparticles. The resulting hydrogels exhibit high compressive strength of 18.9 MPa and an elongation at break of ∼2100%. Importantly, the Al-NC gel displayed a high self-healing efficiency of 86% without any external stimulus at room temperature. Moreover, we found an interesting multi-hierarchical porous morphology of the Al-NC gel depending on the contents of the aluminum hydroxide nanoparticles. The tough nanocomposite hydrogel might provide a novel promising avenue for designing advanced self-healable soft materials for various biomedical applications.

Layered Rare-Earth Hydroxide/Polyacrylamide Nanocomposite Hydrogels with Highly Tunable Photoluminescence

Polymer nanocomposite (NC) hydrogels, with 3D networks composed of delaminated inorganic nanoparticles and a polymer matrix, usually display super mechanical toughness. However, the few types of inorganic materials and relatively scarce research for NC hydrogel functions seriously limit their applications. For the first time layered rare-earth hydroxide (LRH)/polyacrylamide NC hydrogels with highly tunable photoluminescence (PL) function are reported, prepared via a convenient and green in situ polymerization process. Interestingly, the NC hydrogels reveal exciting multicolored PL phenomenon (green, yellow, orange, reddish-orange to bluish violet), long luminescence lifetime, and relatively high quantum efficiency. Furthermore, the fascinating PL function is highly tunable by adjusting LRH constituent or its concentration, and excitation wavelength. The results highlight the fabrication and applications of functional polymer NC hydrogels with highly tunable PL function.

Clay-Alcohol-Water Dispersions: Anomalous Viscosity Changes Due to Network Formation of Clay Nanosheets Induced by Alcohol Clustering

Clay-alcohol-water ternary dispersions were compared with alcohol-water binary mixtures in terms of viscosity and optical absorbance. Aqueous clay dispersions to which lower alcohols (ethanol, 1-propanol, 2-propanol, and tert-butanol) were added exhibited significant viscosity anomalies (maxima) when the alcohol content was 30-55 wt %, as well as optical absorbance anomalies (maxima). The maximum viscosity (η_max) depended strongly on the clay content and varied between 300 and 8000 mPa·s, making it remarkably high compared with the viscosity anomalies (2 mPa·s) observed in alcohol-water binary mixtures. The alcohol content at η_max decreased as the hydrophobicity of the alcohol increased. The ternary dispersions with viscosity anomalies exhibited thixotropic behaviors. The effects of other hydrophilic solvents (glycols) and other kinds of clays were also clarified. Based on these findings and the average particle size changes, the viscosity anomalies in the ternary dispersions were explained by alcohol-clustering-induced network formation of the clay nanosheets. It was estimated that 0.9, 1.7, and 2.5 H₂O molecules per alcohol molecule were required to stabilize the ethanol, 2-propanol, and tert-butanol, respectively, in the clay-alcohol-water dispersions.