Discotic liquid crystals: from tailor-made synthesis to plastic electronics

Sulfobetaine ionic liquid crystals based on strong acids: phase behavior and electrochemistry

A group of new zwitterion based ionic liquid crystals (ILCs) have been synthesized. Depending on the counter anion (mesylate or hydrogen sulfate) the phase behavior of the resulting ILCs is quite different. Mesylate based ILCs show complex phase behavior with multiple phases depending on the alkyl chain length. In contrast, hydrogen sulfate based systems always exhibit Colr phases irrespective of the alkyl chain length. The latter show much larger ILC mesophase windows and are thermally stable up to ca. 200 °C. All ILCs show reasonable ionic conductivities of up to 10-4 S cm-1 at elevated temperatures, making these ILCs candidates for intermediate temperature ionic conductors.

Room-Temperature Liquid Crystalline Tetraphenylethylene-Surfactant Complex with Chiral Supramolecular Structure and Tunable Circularly Polarized Luminescence

A novel room-temperature liquid crystal of tetraphenylethylene derivative (TPE-DHAB) was synthesized using an ionic self-assembly strategy. The TPE-DHAB complex exhibits typical aggregation-induced emission properties and a unique helical supramolecular structure. Moreover, the generation and handedness inversion of circularly polarized luminescence (CPL) can be achieved through further chiral solvation, providing a facile approach to fabricate room-temperature liquid crystalline materials with controllable supramolecular structures and tunable CPL properties through a synergistic strategy of ionic self-assembly and chiral solvation process.

Novel Self-Assembling Supramolecular Phenanthro[9,10-a]phenazine Discotic Liquid Crystals: Synthesis, Characterization and Charge Transport Studies

The incorporation of heteroatoms in the chemical structure of organic molecules has been identified as analogous to the doping process adopted in silicon semiconductors to influence the nature of charge carriers. This strategy has been an eye-opener for material chemists in synthesizing new materials for optoelectronic applications. Phenanthro[9,10-a]phenazine-based mesogens have been synthesized via a cyclo-condensation pathway involving triphenylene-based diketone and o-phenyl diamines. The incorporation of phenazine moiety as discussed in this paper, alters the symmetric nature of the triphenylene. The phenanthro[9,10-a]phenazine-based mesogens exhibit hole mobility in the order of 10-4 cm2/Vs as measured by the space-charge limited current (SCLC) technique. The current density in the SCLC device increases with increasing temperature which indicates that the charge transport is associated with the thermally activated hopping process. This report attempts to elucidate the self-organization of asymmetric phenanthro[9,10-a] phenazine in the supramolecular liquid crystalline state and their potential for the fabrication of high-temperature optoelectronic devices. However, the low charge carrier mobility can be one of the challenges for device performance.

Buckybowl Molecular Tweezers for Recognition of Fullerenes

Buckybowl tweezers are a relatively young research area closely associated with the development of non-planar polycyclic aromatic systems and supramolecular chemistry. Since the appearance of the first prototypes in the early 2000s, the tweezers have undergone evolutionary changes. Nowadays they are able to effectively interact with fullerenes and the results opened up prospects for development in the field of sensing, nonlinear optics, and molecular switchers. In the present study, examples of corannulene-based and other buckybowl tweezers for the recognition of C60 and C70 fullerenes were summarized and analyzed. The main structural components of the tweezers were also reviewed in detail and their role in the formation of complexes with fullerenes was evaluated. The revealed structural patterns should trigger the development of novel recognition systems and materials with a wide range of applications.

Direct Electrodeposition of Electrically Conducting Ni3(HITP)2 MOF Nanostructures for Micro-Supercapacitor Integration

Micro-supercapacitors emerge as an important electrical energy storage technology expected to play a critical role in the large-scale deployment of autonomous microdevices for health, sensing, monitoring, and other IoT applications. Electrochemical double-layer capacitive storage requires a combination of high surface area and high electronic conductivity, with these being attained only in porous or nanostructured carbons, and recently found also in conducting metal-organic frameworks (MOFs). However, techniques for conformal deposition at micro- and nanoscale of these materials are complex, costly, and hard to upscale. Herein, the study reports direct, one step non-sacrificial anodic electrochemical deposition of Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 - Ni3(HITP)2, a porous and electrically conducting MOF. Employing this strategy enables the growth of Ni3(HITP)2 films on a variety of 2D substrates as well as on 3D nanostructured substrates to form Ni3(HITP)2 nanotubes and Pt@ Ni3(HITP)2 core-shell nanowires. Based on the optimal electrodeposition protocols, Ni3(HITP)2 films interdigitated micro-supercapacitors are fabricated and tested as a proof of concept.

Frank-Kasper phases in charge transfer complexes enable tunable photoelectronic properties

Understanding how particles pack in space and the mechanisms underlying symmetry selection across soft matter is challenging. The Frank-Kasper (F-K) phase of complex spherical packing is amongst the most fascinating phases; however, it has not been observed in discotic liquid crystals until now. Herein, we report the first observation of F-K phases of charge transfer complexes (CTCs) obtained from triphenylene derivatives as donors and 2,4,7-trinitro-9-fluorenone as the acceptor. The CTCs were characterized using experimental and theoretical calculations, indicating that the F-K A15 cubic lattice possesses a unit cell containing 8 sphere-like supramolecules, each of which was self-assembled from 3 CTC complexes. The lattice constant was only 3.2 nm, which is by far the smallest for the A15 phase. Interestingly, the supramolecular assembly can be regarded as the molecular column splitting into isolated spherical fragments, impeding charge transfer and turning it into one insulator. This provides a simple and effective method for preparing asymmetric complex compounds for the design of unconventional self-assembled nanostructures.

Useful synthetic artifacts? The impact of ubiquitous linker-adjacent groups on the self-assembly of discotic dimers

Although discotic dimers commonly feature bulky ether substituents adjacent to the linking group, the impact of these chains on self-assembly remains unclear. A series of dibenzo[a,c]phenazine dimers with alkoxy groups ortho to the linker were prepared and their solution conformational dynamics and liquid crystalline properties examined. The presence of a methoxy substitutent adjacent to the bridging group increased the phase stability, whereas longer chains dramatically decreased clearing temperatures. NMR solution studies indicated that adjacent groups increased the preference of dimers to adopt unfolded conformers. DFT models indicated that the unfolded structures were nonplanar and hence less compatible with columnar ordering, leading to a destabilization of the mesophases.

Norcorroles as antiaromatic π-electronic systems that form dimension-controlled assemblies

Norcorrole derivatives with 3,4,5-trialkoxyphenyl moieties at the meso positions were synthesized to form various stacking assemblies in single crystals and thermotropic liquid crystals (LCs) depending on aliphatic chain lengths. Triple-decker stacking structures were formed via the interactions between the antiaromatic systems formed for the butoxy and dodecyloxy derivatives in the single-crystal and LC states, respectively. In particular, the LC state exhibited discotic columnar structures comprising triple deckers to exhibit high electric conductivity, as supported by molecular dynamics simulations.

Phenanthrothiophene-Triazine Star-Shaped Discotic Liquid Crystals: Synthesis, Self-Assembly, and Stimuli-Responsive Fluorescence Properties

Lipophilic biphenylthiophene- and phenanthrothiophene-triazine compounds, BPTTn and CPTTn, respectively, were prepared by a tandem procedure involving successive Suzuki-Miyaura coupling and Scholl cyclodehydrogenation reactions. These compounds display photoluminescence in solution and in thin film state, solvatochromism with increasing solvent's polarity, as well as acidochromism and metal ion recognition stimuli-responsive fluorescence. Protonation of BPTT10 and CPTT10 by trifluoroacetic acid results in fluorescence quenching, which is reversibly restored once treated with triethylamine (ON-OFF switch). DFT computational studies show that intramolecular charge transfer (ICT) phenomena occurs for both molecules, and reveal that protonation enhances the electron-withdrawing ability of the triazine core and reduces the band gap. This acidochromic behavior was applied to a prototype fluorescent anti-counterfeiting device. They also specifically recognize Fe3+ through coordination, and the recognition mechanism is closely related to the photoinduced electron transfer between Fe3+ and BPTT10/CPTT10. CPTTn self-assemble into columnar rectangular (Colrec) mesophase, which can be modulated by oleic acid via the formation of a hydrogen-bonded supramolecular liquid crystal hexagonal Colhex mesophase. Finally, CPTTn also form organic gels in alkanes at low critical gel concentration (3.0 mg/mL). Therefore, these star-shaped triazine molecules possess many interesting features and thus hold great promises for information processing, liquid crystal semiconductors and organogelators.

Convoluted micellar morphological transitions driven by tailorable mesogenic ordering effect from discotic mesogen-containing block copolymer

Solution-state self-assemblies of block copolymers to form nanostructures are tremendously attractive for their tailorable morphologies and functionalities. While incorporating moieties with strong ordering effects may introduce highly orientational control over the molecular packing and dictate assembly behaviors, subtle and delicate driving forces can yield slower kinetics to reveal manifold metastable morphologies. Herein, we report the unusually convoluted self-assembly behaviors of a liquid crystalline block copolymer bearing triphenylene discotic mesogens. They undergo unusual multiple morphological transitions spontaneously, driven by their intrinsic subtle liquid crystalline ordering effect. Meanwhile, liquid crystalline orderedness can also be built very quickly by doping the mesogens with small-molecule dopants, and the morphological transitions are dramatically accelerated and various exotic micelles are produced. Surprisingly, with high doping levels, the self-assembly mechanism of this block copolymer is completely changed from intramolecular chain shuffling and rearrangement to nucleation-growth mode, based on which self-seeding experiments can be conducted to produce highly uniform fibrils.

Photoswitching in a Liquid Crystalline Pt(II) Coordination Complex

Photoswitching of photoluminescence has sparked tremendous research interests for super-resolution imaging, high-security-level anti-counterfeiting, and other high-tech applications. However, the excitation of photoluminescence is usually ready to trigger the photoswitching process, making the photoluminescence readout unreliable. Herein, we report a new photoswitch by the marriage of spiropyran with platinum(II) coordination complex. Viable photoluminescence can be achieved upon excitation by 480 nm visible light while the photoswitching can be easily triggered by 365 nm UV light. The feasible photoswitching may be benefited from the formed liquid crystalline (LC) phase of the designed photoswitch as a crystalline spiropyran is normally unable to implement photoswitching. Compared to the counterparts, this LC photoswitch can show distinct and reliable apparent colors and emission colors before and after photoswitching, which may promise the utility in high-security-level anti-counterfeiting and other advanced information technologies.

Reversible Molecular Conformation Transitions of Smectic Liquid Crystals for Light/Bias-Gated Transistor Memory

In recent years, organic photonic field-effect transistors have made remarkable progress with the rapid development of conjugated polycrystalline materials. Liquid crystals, with their smooth surface, defined layer thickness, and crystalline structures, are commonly used for these advantages. In this work, a series of smectic liquid crystalline molecules, 2,9-didecyl-dinaphtho-thienothiophene (C10-DNTT), 2,7-didecyl-benzothieno-benzothiopene (C10-BTBT), 3,9-didecyl-dinaphtho-thiophene (C10-DNT), and didecyl-sexithiophene (C10-6T), have been used in photonic transistor memory, functioning as both hole-transport channels and electron traps to investigate systematically the reasons and mechanisms behind the memory behavior of smectic liquid crystals. After thermal annealing, C10-BTBT and C10-6T/C10-DNTT are homeotropically aligned from the smectic A and smectic X phases, respectively. The 3D-ordered structure of these smectic-aligned crystals contributed to efficient photowriting and electrical erasing processes. Among them, the device performance of C10-BTBT was particularly significant, with a memory window of 21 V. The memory ratio could reach 1.5 × 106 and maintain a memory ratio of over 3 orders after 10,000 s, contributing to its smectic A structure. Through the research, we confirmed the memory and light/bias-gated behaviors of these smectic liquid crystalline molecules, attributing them to reversible molecular conformation transitions and the inherent structural inhomogeneity inside the polycrystalline channel layer.

Tailoring Chiral Discotic Liquid Crystals: Mesophase Engineering through Alternative Approaches and Chain Lengths

Hydrogen (H)-bonding is crucial in constructing superstructures in chemical (such as chiral discotic liquid crystals (DLCs)) as well as in biological systems due to its specific and directional nature. In this context, we achieved the successful synthesis of two branches of heptazine-based H-bonded complexes using distinct strategies. Hpz*-Es-Cn , we incorporated chiral alkyl tails (Hpz-chiral) onto the central C3 symmetric heptazine core, connected to achiral benzoic acid derivatives (Es-Cn acid) through H-bonding. In Hpz-Es-Cn -acid*, we used an achiral heptazine derivative (Hpz-Es-Cn ) linked to a chiral acid via H-bonding. On the other hand, based on the DSC results, we observed that Hpz*-Es-Cn complexes exhibited three distinct phases, whereas Hpz-Es-Cn -acid* complexes displayed only a single mesophase. In polarized optical microscopy (POM) observations, all the complexes displayed birefringence at room temperature, with the color of the POM images changing as the temperature varied. X-ray diffraction (XRD) studies at lower temperatures confirmed that Hpz*-Es-C8 exhibited the columnar rectangular (Colr ) phase, while Hpz*-Es-C10/12 exhibited the columnar oblique (Colob ) phase. However, all the H-bonded complexes exhibited the columnar hexagonal (Colh ) phase at higher temperatures. The chiroptical spectra recorded by Circular dichroism (CD) highlight the specific observations in the columnar phase of two complexes, Hpz*-Es-C10 and Hpz*-Es-C12 . This behavior has potential applications in various fields, including sensors, displays, and responsive materials.

Supramolecular Large Nanosheets Assembled at Air/Water Interfaces and in Solution from Amphiphilic Heptagon-Containing Nanographenes

We report the synthesis of a new set of amphiphilic saddle-shaped heptagon-containing polycyclic aromatic hydrocarbons (PAHs) functionalized with tetraethylene glycol chains and their self-assembly into large two-dimensional (2D) polymers. An in-depth analysis of the self-assembly mechanism at the air/water interface has been carried out, and the proposed arrangement models are in good agreement with the molecular dynamics simulations. Quite remarkably, the number and disposition of the tetraethylene glycol chains significantly influence the disposition of the PAHs at the interface and conditionate their packing under pressure. For the three compounds studied, we observed three different behaviors in which the aromatic core is parallel, perpendicular, and tilted with respect to the water surface. We also show that these curved PAHs are able to self-assemble in solution into remarkably large sheets of up to 150 μm2. These results show the relationship, within a family of curved nanographenes, between the monomer configuration and their self-assembly capacity in air/water interfaces and organic-water mixtures.

Charge carrier transport in perylene-based and pyrene-based columnar liquid crystals

Electron and hole transport characteristics were evaluated for perylene-based and pyrene-based compounds using electron-only and hole-only devices. The perylene presented a columnar hexagonal liquid crystal phase at room temperature with strong molecular π-stacking inside the columns. The pyrene crystallizes bellow 166 °C, preserving the close-packed columnar rectangular structure of the mesophase. Photophysical analysis and numerical calculations assisted the interpretation of positive and negative charge carrier mobilities obtained from fitting the space charge limited regime of current vs voltage curves. The pyrene-based material demonstrated an electron mobility two orders of magnitude higher than the perylene one, indicating the potential of this class of materials as electron transporting layer.

Continuous Nanospace in Nanoporous Liquid Crystal Investigated by 129 Xe NMR Spectroscopy

Continuous nanopores within fluid materials could be used for novel chemical events such as the accommodation of guest molecules, unique arrays of the entrapped molecules, and chemical reactions in a dynamic molecular assembly. Columnar liquid crystals composed of a one-dimensionally stacked assembly of shape-persistent macrocycles form nanochannels owing to the intrinsic nanospace in the column. However, the existence of substantial nanoporosity has not been confirmed experimentally thus far. In this study, for the first time in the literature, we confirmed the presence of discrete and spatiotemporally continuous voids in a liquid-crystalline material. In 129 Xe NMR spectroscopy of liquid crystalline columnar assembly of imine-bridged shape-persistent macrocycles under Xe atmosphere, the NMR signals of the Xe atoms entrapped in the liquid-crystalline macrocycle depended on the gas pressure and phase-transition temperatures. These results indicate that the encapsulation of Xe gas molecules within the discrete and oriented nanospaces of nanoporous liquid crystals is different from the homogeneous dissolution of the solute in an ordinary solution.

Thermoreversible helical fibers from photoreactive triphenylene-derived liquid crystals in liquid paraffin

Liquid crystalline triphenylene derivatives, TPC1p-n (n = 6, 12, 14, 16) were prepared using p-alkoxycinnamate as the [2+2] photo-cyclization site. TPC1p-n (n = 12, 14, 16) showed Colr phase and gave crescent-shaped or helical fibers after UV-irradiated in liquid paraffin solutions at 90 and 110 °C in the Colr temperature range. The apparent photoreaction products were shown to be thermally reversible, i.e. they dissolved in liquid paraffin at high temperatures and reappeared on cooling, indicating that they were aggregates of oligomerized TPC1p-n. The reaction mechanism was discussed in terms of the structure of the liquid crystalline phase.

Photoluminescent Thin Films of Room-Temperature Glassy Tris(keto-hydrozone) Discotic Liquid Crystals and Their Nanocomposites with Single-Walled Carbon Nanotubes for Optoelectronics

This study addresses the photoresponse of liquid-crystalline tris(keto-hydrozone) discotic (TKHD)-a star-shaped molecular structure with three branches. Object of our research interest was also TKHD filled with single-walled carbon nanotubes (SWCNTs) at a concentration of 1 wt %. At room temperature, the discotic liquid crystals in thin films (thickness 3 μm) of both TKHD and nanocomposite SWCNT/TKHD were in a glassy state. Such glassy thin films exhibited photoluminescence ranging from the deep-red to the near-infrared spectral region, being attractive for organic optoelectronics. The addition of SWCNTs to TKHD was found to stabilize the photoluminescence of TKHD, which is of significance for optoelectronic device applications. The photothermoelectrical response of highly conductive SWCNT/TKHD nanocomposite films was characterized by electrical impedance spectroscopy in the frequency range from 1 Hz to 1 MHz of the applied electric field. It was elucidated that the reversible photothermoelectrical effect in SWCNT/TKHD films occurs through SWCNTs and their network.

Does thermotropic liquid crystalline self-assembly control biological activity in amphiphilic amino acids? - tyrosine ILCs as a case study

Amphiphilic amino acids represent promising scaffolds for biologically active soft matter. In order to understand the bulk self-assembly of amphiphilic amino acids into thermotropic liquid crystalline phases and their biological properties a series of tyrosine ionic liquid crystals (ILCs) was synthesized, carrying a benzoate unit with 0-3 alkoxy chains at the tyrosine unit and a cationic guanidinium head group. Investigation of the mesomorphic properties by polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray diffraction (WAXS, SAXS) revealed smectic A bilayers (SmA_d) for ILCs with 4-alkoxy- and 3,4-dialkoxybenzoates, whereas ILCs with 3,4,5-trisalkoxybenzoates showed hexagonal columnar mesophases (Col_h), while different counterions had only a minor influence. Dielectric measurements revealed a slightly higher dipole moment of non-mesomorphic tyrosine-benzoates as compared to their mesomorphic counterparts. The absence of lipophilic side chains on the benzoate unit was important for the biological activity. Thus, non-mesomorphic tyrosine benzoates and crown ether benzoates devoid of additional side chains at the benzoate unit displayed the highest cytotoxicities (against L929 mouse fibroblast cell line) and antimicrobial activity (against Escherichia coli ΔTolC and Staphylococcus aureus) and promising selectivity ratio in favour of antimicrobial activity.

Dynamic memory tuned by frequency in a homologous thermotropic liquid crystal

With scaling of dynamic RAM and NAND memory technologies reaching a limit, there is a need for dynamic memory with high density. In this work, an investigation on existence of dynamic memory feature in a frequency tuned homologous series of thermotropic liquid crystals has been carried out. A homologues series of five thermotropic liquid crystalline compounds comprising of 4-butyl benzoic acid and various alkyloxy benzoic acids are prepared, and all these mesogens exhibit only nematic phase. Liquid crystal dynamic memory storage setup consists of a conducting transparent glass cell with two indium tin oxide coated transparent glass plates acting as electrical electrodes in which the selected thermotropic liquid crystal is filled by capillary action. The temperature dependent dielectric relaxation studies enable to elucidate the relaxation frequency of each of these mesogens in nematic phase. The liquid crystal at different temperatures is excited with the relaxation frequency at various chosen fields, and the dielectric hysteresis is recorded. The magnitude of the hysteresis loop is directly proportional to the memory storage capacity. The main objective of this work is observation of dynamic memory storage in liquid crystals exhibiting nematic phase, at different frequencies in a thermotropic liquid crystal as the ingredient in a conducting polyamide buffed glass cell excited by an external electrical dc stimulus. The variation of the hysteresis loop with varying field; temperature and frequency are also studied and reported in this work.

Collective bending motion of a two-dimensionally correlated bowl-stacked columnar liquid crystalline assembly under a shear force

Stacked teacups inspired the idea that columnar assemblies of stacked bowl-shaped molecules may exhibit a unique dynamic behavior, unlike usual assemblies of planar disc- and rod-shaped molecules. On the basis of the molecular design concept for creating higher-order discotic liquid crystals, found in our group, we synthesized a sumanene derivative with octyloxycarbonyl side chains. This molecule forms an ordered hexagonal columnar mesophase, but unexpectedly, the columnar assembly is very soft, similar to sugar syrup. It displays, upon application of a shear force on solid substrates, a flexible bending motion with continuous angle variations of bowl-stacked columns while preserving the two-dimensional hexagonal order. In general, alignment control of higher-order liquid crystals is difficult to achieve due to their high viscosity. The present system that brings together higher structural order and mechanical softness will spark interest in bowl-shaped molecules as a component for developing higher-order liquid crystals with unique mechanical and stimuli-responsive properties.

Brilliant whiteness in shrimp from ultra-thin layers of birefringent nanospheres

A fundamental question regarding light scattering is how whiteness, generated from multiple scattering, can be obtained from thin layers of materials. This challenge arises from the phenomenon of optical crowding, whereby, for scatterers packed with filling fractions higher than ~30%, reflectance is drastically reduced due to near-field coupling between the scatterers. Here we show that the extreme birefringence of isoxanthopterin nanospheres overcomes optical crowding effects, enabling multiple scattering and brilliant whiteness from ultra-thin chromatophore cells in shrimp. Strikingly, numerical simulations reveal that birefringence, originating from the spherulitic arrangement of isoxanthopterin molecules, enables intense broadband scattering almost up to the maximal packing for random spheres. This reduces the thickness of material required to produce brilliant whiteness, resulting in a photonic system that is more efficient than other biogenic or biomimetic white materials which operate in the lower refractive index medium of air. These results highlight the importance of birefringence as a structural variable to enhance the performance of such materials and could contribute to the design of biologically inspired replacements for artificial scatterers like titanium dioxide.

Microwave-assisted C-C bond formation of diarylacetylenes and aromatic hydrocarbons on carbon beads under continuous-flow conditions

The synthesis of polycyclic aromatic compounds generally requires stoichiometric oxidants or homogeneous metal catalysts, however, the risk of contamination of inorganic residues can affect their properties. Here we present a microwave (MW)-assisted platinum on beaded activated carbon (Pt/CB)-catalyzed C-C bond formation of diarylacetylenes and aromatic hydrocarbons under continuous-flow conditions. Various fused aromatic compounds were continuously synthesized via dehydrogenative C(sp²)-C(sp²) and C(sp²)-C(sp³) bond formation with yields of up to 87% without the use of oxidants and bases. An activated, local reaction site on Pt/CB in the flow reaction channel reaching temperatures of more than three hundred degrees Celsius was generated in the catalyst cartridge by selective microwave absorption in CB with an absorption efficiency of > 90%. Mechanistic experiments of the transformation reaction indicated that a constant hydrogen gas supply was essential for activating Pt. This is an ideal reaction with minimal input energy and no waste production.

Self-assembled discotics as molecular semiconductors

With the advent of a new era of smart-technology, the demand for more economic optoelectronic materials that do not compromise with efficiency is gradually on the rise. Organic semiconductors provide greener alternatives to the conventional inorganic ones, but encounter the challenge of balancing charge carrier mobility with processability in devices. Discotic liquid crystals (DLCs), a class of self-assembling soft organic materials, possess the perfect degree of order and dynamics to address this challenge. Providing unidimensional charge carrier pathways through their nanoscale columnar architecture, DLCs can behave as efficient charge transport systems across a wide range of optoelectronic devices. Moreover, DLCs are solution-processable, thus reducing the fabrication cost. In this article, we have discussed the approaches towards developing DLCs as semiconductors, focusing on their molecular design concepts, supramolecular structures and electronic properties in the context of their charge carrier mobilities.

Synthesis and characterization of new imine liquid crystals based on terminal perfluoroalkyl group

New organic derivatives named, (E)-3(or4) -(alkyloxy)-N-{(trifluoromethyl)benzylidene}aniline, 1a-f, were synthesized and examined their liquid crystalline behaviors. FT-IR, ¹H NMR, ¹³C NMR, ¹⁹F NMR, elemental analyses and GCMS were used to validate the prepared compounds' chemical structures. We used differential scanning calorimetry (DSC) and polarized optical microscopy (POM) to investigate the mesomorphic characteristics of the formed Schiff bases. All tested compounds of series 1a-c have mesomorphic behaviour of nematogenic temperature ranges while the group 1d-f show non-mesomorphic properties. Moreover, it was found that the enantiotropic N phases included all of the homologue 1a-c. Computational studies using DFT (density functional theory) validated the experimental mesomorphic behavior results. All the analyzed compounds had their dipole moments, polarizability, and reactivity characteristics explained. Theoretical simulations showed that as the length of the terminal chain is increased, the polarizability of the stuided compounds increases. Consequently, compounds 1a and 1d have the least polarizability.

Design of Liquid Crystal Materials Based on Palmitate, Oleate, and Linoleate Derivatives for Optoelectronic Applications

Herein, liquid crystalline derivatives based on palmitate, oleate, and linoleate moieties with azomethine cores were synthesized, and their physical, chemical, optical, and photophysical properties were investigated in detail. The mesomorphic activity of these materials was examined through polarized optical microscopy (POM) and differential scanning calorimetry (DSC). The observed results revealed that the stability of the thermal mesophase depends on the terminal polar as well as on the fatty long-chain substituents. Purely smectogenic phases were detected in all three terminal side chains. A eutectic composition with a low melting temperature and a broad smectic A range was found by constructing a binary phase diagram and addressing it in terms of the mesomorphic temperature range. The energy bandgap of the palmitate-based derivative (Ia) was determined as 3.95 eV and slightly increased to 4.01 eV and 4.05 eV for the oleate (Ib) and linoleate (Ic) derivatives, respectively. The optical constants (n, κ, ε_r, and ε_i) were extracted from the fitting of measured spectroscopic ellipsometer data. The steady-state spectra of these samples exhibited a broad emission in the range 400-580 nm, which was found to be blue shifted to 462 nm for both Ib and Ic derivatives. The average fluorescence decay lifetime of the Ia derivative was found to be 598 ps, which became faster for the Ib and Ic derivatives and slower for the sample with a chloride end polar group.

Pyrene-Fused Poly-Aromatic Regioisomers: Synthesis, Columnar Mesomorphism, and Optical Properties

π-Extended pyrene compounds possess remarkable luminescent and semiconducting properties and are being intensively investigated as electroluminescent materials for potential uses in organic light-emitting diodes, transistors, and solar cells. Here, the synthesis of two sets of pyrene-containing π-conjugated polyaromatic regioisomers, namely 2,3,10,11,14,15,20,21-octaalkyloxypentabenzo[a,c,m,o,rst]pentaphene (BBPn) and 2,3,6,7,13,14,17,18-octaalkyloxydibenzo[j,tuv]phenanthro [9,10-b]picene (DBPn), is reported. They were obtained using the Suzuki-Miyaura cross-coupling in tandem with Scholl oxidative cyclodehydrogenation reactions from the easily accessible precursors 1,8- and 1,6-dibromopyrene, respectively. Both sets of compounds, equipped with eight peripheral aliphatic chains, self-assemble into a single hexagonal columnar mesophase, with one short-chain BBPn homolog also exhibiting another columnar mesophase at a lower temperature, with a rectangular symmetry; BBPn isomers also possess wider mesophase ranges and higher mesophases' stability than their DBPn homologs. These polycyclic aromatic hydrocarbons all show a strong tendency of face-on orientation on the substrate and could be controlled to edge-on alignment through mechanical shearing of interest for their implementation in photoelectronic devices. In addition, both series BBPn and DBPn display green-yellow luminescence, with high fluorescence quantum yields, around 30%. In particular, BBPn exhibit a blue shift phenomenon in both absorption and emission with respect to their DBPn isomers. DFT results were in good agreement with the optical properties and with the stability ranges of the mesophases by confirming the higher divergence from the flatness of DBPn compared with BBPn. Based on these interesting properties, these isomers could be potentially applied not only in the field of fluorescent dyes but also in the field of organic photoelectric semiconductor materials as electron transport materials.

Light Modulated Reversible "On-Off" Transformation of Arylazoheteroarene Based Discotics in Nematic Organization

Three benzene-1,3,5-tricarboxamide (BTA) core-based molecular systems appended with phenylazo-3,5-dimethylisoxazole photoswitches at the peripheral position through variable-length alkoxy chains have been designed and synthesized. The supramolecular interactions of the mesogens provided discotic nematic liquid crystalline assembly as confirmed by polarized optical microscopy (POM) and X-ray diffraction (XRD) studies. Spectroscopic studies confirmed the reversible photoswitching and excellent thermal stability of the photoswitched states in solution phase and thin film. Also, atomic force microscopic (AFM) and POM investigations demonstrated the morphological changes in the self-assembly induced by the photoirradiation as monitored by the changes in the height profiles and optical appearance of the textures, respectively. Remarkably, the liquid crystalline discotic molecules showed reversible "on and off states" controlled by light at ambient temperature.

Advances in the Chemistry of 2,4,6-Tri(thiophen-2-yl)-1,3,5-triazine

Heterocyclic systems are now considered to be an integral part of material chemistry. Thiophene, selenophene, furan, pyrrole, carbazole, triazine and others are some such examples worth mentioning. 2,4,6-Tri(thiophen-2-yl)-1,3,5-triazine is a C3h -symmetric system with thiophene as the donor unit and s-triazine as the acceptor unit. This review gives an insight into the advances made in the thienyl-triazine chemistry over the past two to three decades. The synthetic pathways for arriving at this system and all its important derivatives are provided. The major focus is on the materials synthesized using the thienyl-triazine system, including star molecules, linear and hyperbranched polymers, porous materials and their diverse applications. This review will play a catalytic role for new dimensions to be explored in thienyl-triazine chemistry.

Hexa-peri-hexabenzocoronene derivatives carrying dovetailed alkyl and diacetylenic side chains: a synthesis, characterization, and polymerization study

A new polymerizable 2,8,14-triphenylhexabenzo[bc,ef,hi,kl,no,qr]coronene (HBC) mesogen bearing alternating dovetailed and linear alkyl chains with a diacetylenic unit were successfully synthesized in this study.

Cyclometalated Platinum(II) Metallomesogens Based on Half-Disc-Shaped β-Diketonate Ligands with Hexacatenar: Crystal Structures, Mesophase Properties, and Semiconductor Devices

A series of new half-disc-shaped platinum(II) complexes [Pt(ppy)(ALⁿ-6OC_nH_2n+1)] (Pt-An), [Pt(ppyF)(ALⁿ-6OC_nH_2n+1)] (Pt-Bn), and [Pt(ppyCF₃)(ALⁿ-6OC_nH_2n+1)] (Pt-Cn) (ALⁿ-6OC_nH_2n+1 = 1,3-bis(3,4,5-trialkoxyphenyl)propane-1,3-dionato; n = 1, 6, 12) with concise structures have been designed and synthesized, in which 2-phenylpyridine (ppy) derivatives were used as cyclometalated ligands and hexacatenar β-diketonate derivatives ALⁿ-6OC_nH_2n+1 as auxiliary ligands. The single-crystal data of the methoxy diketonate analogues Pt-A1, Pt-B1, and Pt-C1 indicate that they all display excellent square planarity. These platinum(II) complexes show a certain emission tunability (ranging from λ = 506-535 nm) by the introduction of fluorine or trifluoromethyl into ppy. Thermal studies reveal that the fluorine-substituted complexes are liquid crystals but the trifluoromethyl-substituted complexes are not. The platinum(II) complexes Pt-A12, Pt-B6, and Pt-B12 can form a hexagonal columnar mesophase via intermolecular π-π interactions. In addition, compared to the reported platinum(II) metallomesogens, Pt-A12 and Pt-B12 exhibit improved ambipolar carrier mobility behaviors in semiconductor devices at the liquid crystal states.

Rubicene, an Unusual Contorted Core for Discotic Liquid Crystals

Rubicene, an unusual contorted polycyclic aromatic hydrocarbon, was realized to function as a novel core fragment for discotic liquid crystals. The central π-conjugated motif was prepared from dialkoxyiodobenzene via Sonagashira coupling followed by pentannulation and Scholl cyclodehydrogenation. The synthesized rubicene derivatives were found to be thermally stable and exhibit enantiotropic columnar mesophases. The columnar arrangement of these derivatives has been validated using polarising optical microscopy, differential scanning calorimetry & small-angle X-ray scattering.

Chiral columns forming a lattice with a giant unit cell

Mesogenic materials, quinoxaline derivatives with semi-flexible cores, are reported to form a new type of 3D columnar phase with a large crystallographic unit cell and Fddd lattice below the columnar hexagonal phase. The 3D columnar structure is a result of frustration imposed by the arrangement of helical columns of opposite chiralities into a triangular lattice. The studied materials exhibit fluorescence properties that could be easily tuned by modification of the molecular structure; for compounds with the extended π electron conjugated systems the fluorescence is quenched. For molecules with a flexible structure the fluorescence quantum yield reaches 25%. On the other hand, compounds with a more rigid mesogenic core, for which the fluorescence is suppressed, show effective photogeneration of charge carriers. For some materials bi-polar hole and electron transport was observed.

Photoisomerizable azobenzene star-shaped liquid crystals: bypassing the absence of hydrogen bonding

Effective molecular tailoring results in star-shaped azo compounds that self-assemble with hexagonal columnar packing and show fast and reversible photoisomerization.

Ditriphenylenothiophene butterfly-shape liquid crystals. The influence of polyarene core topology on self-organization, fluorescence and photoconductivity

Two series of regio-isomeric mesomorphous, luminescent and conductive compounds, based on a ditriphenylenothiophene core (α/β-DTPT), were successfully synthesized by the Suzuki–Miyaura cross-coupling/Scholl cyclo-dehydrogenation reactions tandem.