Preparation of nanostructures by orthogonal self-assembly of hydrogelators and surfactants

Structural Phase Separation of Membranes and Fibers

Lipid membranes interact with protein filaments on a superstructural level such that they may colocalize or spatially segregate in a living cell, whereas higher-order organization of membranes and fibers is less well explored in artificial systems. Herein, we report on the structural separation of a dispersed, membranous phase and a continuous, fibrous phase in a synthetic system. Systematic characterization of its thermodynamics and kinetics uncovers a physical principle governing phase separation: Interlamellar repulsion, favoring expansion of the membranous phase, is balanced by fibrous network elasticity, preferring the opposite. A direct consequence of this principle is the spatial addressability of the phase separation, preferably localized to soft regions of the fibrous network. Guided by this principle, we design a fibrous network with different spatial heterogeneity to modulate the phase separation, realizing a "memory" effect, patterned separation, and gradient separation. The current spatially addressable phase separation is in great contrast to the conventional ones, in which nucleation is difficult to predict or control. The fact that the membranous and fibrous phases compete for space has implications for the intracellular interactions between endoplasmic reticulum membranes and cytoskeletal filaments.

Cell-Like Synthetic Supramolecular Soft Materials Realized in Multicomponent, Non-/Out-of-Equilibrium Dynamic Systems

Living cells are complex, nonequilibrium supramolecular systems capable of independently and/or cooperatively integrating multiple bio-supramolecules to execute intricate physiological functions that cannot be accomplished by individual biomolecules. These biological design strategies offer valuable insights for the development of synthetic supramolecular systems with spatially controlled hierarchical structures, which, importantly, exhibit cell-like responses and functions. The next grand challenge in supramolecular chemistry is to control the organization of multiple types of supramolecules in a single system, thus integrating the functions of these supramolecules in an orthogonal and/or cooperative manner. In this perspective, the recent progress in constructing multicomponent supramolecular soft materials through the hybridization of supramolecules, such as self-assembled nanofibers/gels and coacervates, with other functional molecules, including polymer gels and enzymes is highlighted. Moreover, results show that these materials exhibit bioinspired responses to stimuli, such as bidirectional rheological responses of supramolecular double-network hydrogels, temporal stimulus pattern-dependent responses of synthetic coacervates, and 3D hydrogel patterning in response to reaction-diffusion processes are presented. Autonomous active soft materials with cell-like responses and spatially controlled structures hold promise for diverse applications, including soft robotics with directional motion, point-of-care disease diagnosis, and tissue regeneration.

Supramolecular gels - a panorama of low-molecular-weight gelators from ancient origins to next-generation technologies

Supramolecular gels, self-assembled from low-molecular-weight gelators (LMWGs), have a long history and a bright future. This review provides an overview of these materials, from their use in lubrication and personal care in the ancient world, through to next-generation technologies. In academic terms, colloid scientists in the 19th and early 20th centuries first understood such gels as being physically assembled as a result of weak interactions, combining a solid-like network having a degree of crystalline order with a highly mobile liquid-like phase. During the 20th century, industrial scientists began using these materials in new applications in the polymer, oil and food industries. The advent of supramolecular chemistry in the late 20th century, with its focus on non-covalent interactions and controlled self-assembly, saw the horizons for these materials shifted significantly beyond their historic rheological applications, expanding their potential. The ability to tune the LMWG chemical structure, manipulate hierarchical assembly, develop multi-component systems, and introduce new types of responsive and interactive behaviour, has been transformative. Furthermore, the dynamics of these materials are increasingly understood, creating metastable gels and transiently-fueled systems. New approaches to shaping and patterning gels are providing a unique opportunity for more sophisticated uses. These supramolecular advances are increasingly underpinning and informing next-generation applications - from drug delivery and regenerative medicine to environmental remediation and sustainable energy. In summary, this article presents a panorama over the field of supramolecular gels, emphasising how both academic and industrial scientists are building on the past, and engaging new fundamental insights and innovative concepts to open up exciting horizons for their future use.

Manipulating supramolecular gels with surfactants: Interfacial and non-interfacial mechanisms

Gel is a class of self-supporting soft materials with applications in many fields. Fast, controllable gelation, micro/nano structure and suitable rheological properties are essential considerations for the design of gels for specific applications. Many methods can be used to control these parameters, among which the additive approach is convenient as it is a simple physical mixing process with significant advantages, such as avoidance of pH change and external energy fields (ultrasound, UV light and others). Although surfactants are widely used to control the formation of many materials, particularly nanomaterials, their effects on gelation are less known. This review summarizes the studies that utilized different surfactants to control the formation, structure, and properties of molecular and silk fibroin gels. The mechanisms of surfactants, which are interfacial and non-interfacial effects, are classified and discussed. Knowledge and technical gaps are identified, and perspectives for further research are outlined. This review is expected to inspire increasing research interest in using surfactants for designing/fabricating gels with desirable formation kinetics, structure, properties and functionalities.

Personal Perspective on Understanding Low Molecular Weight Gels

Low molecular weight gels are formed by the self-assembly of small molecules into anisotropic structures that form a network capable of immobilizing the solvent. Such gels are common, with a huge number of different examples existing, and they have many applications. However, there are still significant gaps in our understanding of these systems and challenges that need to be addressed if we are to be able to fully design such systems. Here, a number of these challenges are discussed.

Multicompartment Hydrogels

Hydrogels belong to the most promising materials in polymer and materials science at the moment. As they feature soft and tissue-like character as well as high water-content, a broad range of applications are addressed with hydrogels, e.g. tissue engineering and wound dressings but also soft robotics, drug delivery, actuators and catalysis. Ways to tailor hydrogel properties are crosslinking mechanism, hydrogel shape and reinforcement, but new features can be introduced by variation of hydrogel composition as well, e.g. via monomer choice, functionalization or compartmentalization. Especially, multicompartment hydrogels drive progress towards complex and highly functional soft materials. In the present review the latest developments in multicompartment hydrogels are highlighted with a focus on three types of compartments, i.e. micellar/vesicular, droplets or multi-layers including various sub-categories. Furthermore, several morphologies of compartmentalized hydrogels and applications of multicompartment hydrogels will be discussed as well. Finally, an outlook towards future developments of the field will be given. The further development of multicompartment hydrogels is highly relevant for a broad range of applications and will have a significant impact on biomedicine and organic devices. This article is protected by copyright. All rights reserved.

From water-rich to oil-rich gelled non-toxic microemulsions

Gelled non-toxic microemulsions have great potential in transdermal drug delivery: the microemulsion provides an optimum solubilizing capacity for drugs and promotes drug permeation through the skin barrier, while the gel network provides mechanical stability. We have formulated such a gelled non-toxic microemulsion consisting of H2O - isopropyl myristate (IPM) - Plantacare 1200 UP (technical-grade alkyl polyglucoside with an average composition of C12G1.4) - 1,2-octanediol in the presence of the low molecular weight gelator (LMWG) 1,3:2,4-dibenzylidene-d-sorbitol (DBS) at an oil-to-water ratio of φ = 0.50. The study at hand aimed to develop gelled non-toxic microemulsions that can contain both oil- and water-soluble drugs and are either water- or oil-based, depending on the application. To accomplish this, we varied the oil-to-water ratio from being water-rich to oil-rich, i.e. 0.2 ≤ φ ≤ 0.8. Phase studies were carried out along the middle phase trajectory, and a suitable LMWG was identified for all φ-ratios. Electrical conductivity measurements showed that the structure can be tuned from water- to oil-continuous by adjusting the amount of 1,2-octanediol and φ-ratios. The existence of the gel network was visualized by freeze-fracture electron microscopy (FFEM) at three different φ-ratios. We found that all systems from φ = 0.35 to φ = 0.80 form strong gels with nearly the same rheological behavior, while the system with φ = 0.20 is a much weaker gel. We attribute this behavior on the one hand to the microemulsion microstructure and on the other hand to the solvent-dependent gelation properties of DBS, which can be described by the Hansen solubility parameters (HSPs).

Supramolecular Template-Directed In Situ Click Chemistry: A Bioinspired Approach to Synthesize G-Quadruplex DNA Ligands

The assembly of guanosine and boronic acids produces anionic hydrogels (G-B hydrogels) that mimic the topology of the DNA G-quadruplex. We herein demonstrate an unconventional approach of using the G-B hydrogel as a supramolecular template that assembles the irreversible formation of DNA G-quadruplex-selective 1,4-triazole ligands from a pool of alkyne-azide building blocks. These generated ligands could also stabilize and strengthen the gel assembly.

Synergistic structures in lyotropic lamellar gels

In this work we present a systematic study on the microstructure of soft materials which combine the anisotropy of lyotropic liquid crystals with the mechanical stability of a physical gel. Systematic small-angle neutron (SANS) and X-ray (SAXS) scattering experiments were successfully used to characterize the lyotropic lamellar phase (L_α) of the system D₂O -n-decanol - SDS which was gelled by two low molecular weight organogelators, 1,3:2,4-dibenzylidene-d-sorbitol (DBS) and 12-hydroxyoctadecanoic acid (12-HOA). Surprisingly, a pronounced shoulder appeared in the scattering curves of the lamellar phase gelled with 12-HOA, whereas the curves of the DBS-gelled L_α phase remained almost unchanged compared to the ones of the gelator-free L_α phase. The appearance of this additional shoulder strongly indicates the formation of a synergistic structure, which neither exists in the gelator-free L_α phase nor in the isotropic binary gel. By comparing the thicknesses of the 12-HOA (25-30 nm) and DBS (4-8 nm) gel fibers with the lamellar repeat distance (7.5 nm), we suggest that the synergistic structure originates from the minimization of the elastic free energy of the lamellar phase. In the case of 12-HOA, where the fiber diameter is significantly larger than the lamellar repeat distance, energetically unfavored layer ends can be prevented, when the layers cylindrically enclose the gel fibers. Interestingly, such structures mimic similar schemes found in neural cells, where axons are surrounded by lamellar myelin sheets.

Control of seed formation allows two distinct self-sorting patterns of supramolecular nanofibers

Self-sorting double network hydrogels comprising orthogonal supramolecular nanofibers have attracted attention as artificially-regulated multi-component systems. Regulation of network patterns of self-sorted nanofibers is considered as a key for potential applications such as optoelectronics, but still challenging owing to a lack of useful methods to prepare and analyze the network patterns. Herein, we describe the selective construction of two distinct self-sorting network patterns, interpenetrated and parallel, by controlling the kinetics of seed formation with dynamic covalent oxime chemistry. Confocal imaging reveals the interpenetrated self-sorting network was formed upon addition of O-benzylhydroxylamine to a benzaldehyde-tethered peptide-type hydrogelator in the presence of lipid-type nanofibers. We also succeed in construction of a parallel self-sorting network through deceleration of seed formation using a slow oxime exchange reaction. Through careful observation, the formation of peptide-type seeds and nanofibers is shown to predominantly occur on the surface of the lipid-type nanofibers via highly dynamic and thermally-fluctuated processes.

Regulation of self-sorted nanofiber network patterns in double network hydrogels comprising supramolecular nanofibers is considered as key for potential applications. Here, the authors describe a selective construction of two distinct self-sorting network patterns, by controlling the kinetics of seed formation with dynamic covalent chemistry.

How an organogelator can gelate water: gelation transfer from oil to water induced by a nanoemulsion

A hydrogel can be formed by an organogelator in the presence of a nanoemulsion. It is expected that this is due to a gelation transfer from oil to water. The system started with an oil-in-water nanoemulsion prepared according to a phase inversion temperature (PIT) process. Into this nanoemulsion consisting of Kolliphor® RH40 and Brij® L4 as surfactants, and Miglyol® 812 as oil and water, we introduced the organogelator 12-hydroxyoctadecanoic acid (12-HOA) in the oil phase. After cooling at room temperature, a slow reversible gelation of the water phase occurred with persistence of the nanoemulsion. This thermally reversible system was investigated using various techniques (rheology, turbidimetry, optical and electron microscopies, scattering techniques). Successive stages appeared during the cooling process after the nanoemulsion formation, corresponding to the migration and self-assembly of the organogelator from the oil nanodroplets to the water phase. According to our measurements and the known self-assembly of 12-HOA, a mechanism explaining the formation of the gelled nanoemulsion is proposed.

Switching of Self-Assembly to Solvent-Assisted Assembly of Molecular Motor: Unveiling the Mechanisms of Dynamic Control on Solvent Exchange

Natural biological molecular motors are capable of performing several biological functions, such as fuel production, mobility, transport, and many other dynamic features. Inspired by these biological motors, scientists effectively synthesized artificial molecular motors to mimic several biological functionalities. Several molecular systems, from sensitive materials to molecular motors, are essential for controlling dynamic processes in larger assemblies. In this work, we discuss the self-assembly of molecular motors in water and how this self-assembly switches to the solvent-assisted assembly as solvent changes to a water-THF (tetrahydrofuran) mixture. We present an elaborate description of the morphological changes of molecular motor assemblies from pure water to a water-THF mixture to pure THF. Under the influence of THF solvent, molecular motors form an assembled structure by taking a sufficient number of THF molecules in between themselves, resulting in an assembled molecular motor with a softened core. So, molecular motor assembly swells in the water-THF mixture, and in pure water, it shrinks. This solvent-assisted assembled structure has a specific shape. We have confirmed this assembly as a solvent-assisted assembly with the help of molecular dynamics simulation and quantum chemical analysis. Molecular motor-THF and THF-THF interactions are the main responsible interactions for solvent-assisted assembly over self-assembly. This work is a perfect example of conversion between self-assembly (shrinking) and solvent-assisted assembly (swelling) of molecular motors by adding THF into water or vice versa. A spectacular check on the shrinking and swelling by merely altering solvents illustrates so many intriguing possibilities for an alteration of dynamic processes at the nanoscale.

Biomimetic Strain-Stiffening Self-Assembled Hydrogels

Supramolecular structures with strain-stiffening properties are ubiquitous in nature but remain rare in the lab. Herein, we report on strain-stiffening supramolecular hydrogels that are entirely produced through the self-assembly of synthetic molecular gelators. The involved gelators self-assemble into semi-flexible fibers, which thereby crosslink into hydrogels. Interestingly, these hydrogels are capable of stiffening in response to applied stress, resembling biological intermediate filaments system. Furthermore, strain-stiffening hydrogel networks embedded with liposomes are constructed through orthogonal self-assembly of gelators and phospholipids, mimicking biological tissues in both architecture and mechanical properties. This work furthers the development of biomimetic soft materials with mechanical responsiveness and presents potentially enticing applications in diverse fields, such as tissue engineering, artificial life, and strain sensors.

A minimalistic catalytically-active cell mimetic made of a supra-molecular hydrogel encapsulated into a polymersome

A minimalistic multicomponent cell mimetic is constructed from a catalytic low molecular weight fibrillar network and a polymersome compartment.

Biomimetic self-assembly of subcellular structures

This article summarizes recent progress on biomimetic subcellular structures and discusses integration of these isolated systems.

The Power of Confocal Laser Scanning Microscopy in Supramolecular Chemistry: In situ Real-time Imaging of Stimuli-Responsive Multicomponent Supramolecular Hydrogels

Multicomponent supramolecular hydrogels are promising scaffolds for applications in biosensors and controlled drug release due to their designer stimulus responsiveness. To achieve rational construction of multicomponent supramolecular hydrogel systems, their in-depth structural analysis is essential but still challenging. Confocal laser scanning microscopy (CLSM) has emerged as a powerful tool for structural analysis of multicomponent supramolecular hydrogels. CLSM imaging enables real-time observation of the hydrogels without the need of drying and/or freezing to elucidate their static and dynamic properties. Through multiple, selective fluorescent staining of materials of interest, multiple domains formed in supramolecular hydrogels (e. g. inorganic materials and self-sorting nanofibers) can also be visualized. CLSM and the related microscopic techniques will be indispensable to investigate complex life-inspired supramolecular chemical systems.

Gelling Lyotropic Liquid Crystals with the Organogelator 1,3:2,4-Dibenzylidene-d-sorbitol Part I: Phase Studies and Sol-Gel Transitions

Gelled lyotropic liquid crystals (gelled LLCs) are the combination of an LLC and a gel network. One method for obtaining gelled LLCs is the addition of a low molecular weight gelator, which forms gels via self-assembled fibrillar networks, to an aqueous surfactant solution. A potent gelator for LLCs is the LMW organogelator 1,3:2,4-dibenzylidene-d-sorbitol (DBS). This gelator gels the lamellar L_α phase, the bicontinuous cubic V₁ phase, and the hexagonal H₁ phase of the system H₂O-C₁₂E₇ (heptaethylene glycol monododecyl ether) without influencing the phase boundaries as visual phase studies and rheometry show. Varying the DBS mass fraction η, one can adjust the sol-gel transition temperature T_sol-gel of the gelled LLCs. At η = 0.0075, all T_sol-gel values are below the LLC-to-isotropic phase transition temperatures T_LLC-iso, that is, the LLCs are formed first while cooling down, followed by gel formation. At η = 0.015, however, T_sol-gel > T_LLC-iso, that is, the gel is formed in an isotropic solvent, which becomes an LLC while cooling down. The system H₂O-C₁₂E₇ is the first where an adjustment of the gelator concentration allowed us to decouple gel and LLC formation for all three LLCs, that is, gel and LLC formation happen one after the other and not simultaneously. This allows us to study whether the structure and thus the properties of gelled LLCs can be manipulated by the order of gel and LLC formation. We discuss our findings in light of the following question: are our gelled LLCs truly orthogonal self-assembled systems, that is, do the LLCs and the gel network form and coexist independently?

Gelation of Lyotropic Liquid-Crystal Phases-The Interplay between Liquid Crystalline Order and Physical Gel Formation

We present a systematical investigation of gelled lyotropic liquid crystals (LLCs). This new class of soft materials combines the anisotropy of LLCs with the mechanical stability of a physical gel. The studied LLC system consists of sodium dodecyl sulfate as a surfactant, n-decanol as a cosurfactant, and water as a solvent. At room temperature, four liquid crystalline phases (lamellar L_α, nematic N_d and N_c, and hexagonal H₁) are formed depending on the composition. We were successful in gelling the lyotropic lamellar phase with the low-molecular-weight organogelator 12-hydroxyoctadecanoic acid (12-HOA). The obtained gelled lamellar phase shows optical birefringence, elastic response, and no macroscopic flow. However, we were not able to obtain gels with hexagonal or nematic structure. These findings can be explained twofold. When gelling the hexagonal phase, the long-range hexagonal order was destroyed and an isotropic gel was formed. The reason might be the incompatibility between the gel fiber network and the two-dimensional long-range translational order of the cylindrical micelles in the hexagonal phase. Otherwise, the lyotropic nematic phase was transformed into an anisotropic gel with the lamellar structure during gelation. Evidently, the addition of the gelator 12-HOA to the lyotropic system considerably widens the lamellar regime because the integration of the surface-active 12-HOA gelator molecules into the nematic micelles flattens out the micelle curvature. We further investigated the successfully gelated L_α phase to examine the impacts of the gel network and the remaining monomeric gelator on both the structure and properties of the gelled lamellar phase. Small-angle X-ray scattering results showed an arrested lamellar layer spacing in the gelled state, which indicates a higher translational order for the gelled lamellar phases in comparison with their gelator-free counterparts.

Hydrogelation with a water-insoluble organogelator - surfactant mediated gelation (SMG)

The low-molecular-weight gelator (LMG) 12-hydroxyoctadecanoic acid (12-HOA) is insoluble in water, but can be solubilized in surfactant micelles. We therefore solubilized 12-HOA at 80 °C in an aqueous solution of cetyltrimethylammonium bromide (CTAB) containing spherical micelles. On cooling this system down to room temperature, a hydrogel is obtained. We will refer to this process as "surfactant-mediated gelation" (SMG). The hydrogels were formed at a lower 12-HOA concentration when sodium salicylate (NaSal) was added to the CTAB system, which induced the formation of wormlike micelles. Hydrogels obtained by SMG from spherical and wormlike micelles are referred to as gelled micellar phases (GMs) and gelled wormlike micellar phases (GWLMs), respectively. Optical microscopy and transmission electron microscopy (TEM) showed that 12-HOA forms self-assembled fibrillar networks (SAFiNs) in both GMs and GWLMs. The sol-gel transition temperature, T_sol-gel, of the GWLM samples was higher than that of the GM samples. Dynamic rheological measurements revealed gel properties (G' > G'' at all angular frequencies) for both gels; however, a higher viscoelasticity was observed for the GWLM samples, which in turn, was reflected in the higher T_sol-gel. Small- and wide-angle X-ray scattering (SWAXS) showed that micelles and gel fibers coexist in the GM and GWLM samples. Our study demonstrates the gelation of aqueous micellar solutions with water-insoluble LMGs.

Gelled non-toxic microemulsions: phase behavior & rheology

Bicontinuous microemulsions gelled with a low molecular weight gelator have been shown to be an orthogonally self-assembled system. With the mechanical stability provided by the gel network, gelled non-toxic bicontinuous microemulsions have the potential to be an efficient transdermal drug delivery carrier. However, up to now no suitable system has been formulated for transdermal drug delivery. To fill this gap, we formulated and characterized a gelled non-toxic bicontinuous microemulsion suitable for the mentioned application. Starting from a previously studied scouting system, namely, H2O-n-octane-n-octyl β-d-glucopyranoside (β-C8G1)-1-octanol, the co-surfactant and the oil were replaced by non-toxic components. Subsequently, the expensive pure surfactant was replaced by cheap technical-grade surfactants (Plantacare® series) to make the system economical. Having formulated the non-toxic microemulsion H2O-IPM-Plantacare 1200 UP-1,2-octanediol, three low molecular weight gelators were studied with regard to the gelation of both the scouting system and the non-toxic system. The chosen gelators were 12-hydroxyoctadecanoic acid (12-HOA), 1,3:2,4-dibenzylidene-d-sorbitol (DBS), and N,N'-dibenzoyl-l-cystine (DBC). We found that only DBS gels the non-toxic microemulsion. The gelled non-toxic bicontinuous microemulsion H2O-IPM-Plantacare 1200 UP-1,2-octanediol was characterized with oscillatory shear rheometry and small-angle neutron scattering (SANS) at a DBS concentration of 0.3 wt% to verify that the system is indeed a gel and that the microstructure of the microemulsion is not altered by the gel network.

Hybrid Soft Nanomaterials Composed of DNA Microspheres and Supramolecular Nanostructures of Semi-artificial Glycopeptides

Aqueous hybrid soft nanomaterials consisting of plural supramolecular architectures with a high degree of segregation (orthogonal coexistence) and precise hierarchy at the nano- and microscales, which are reminiscent of complex biomolecular systems, have attracted increasing attention. Remarkable progress has been witnessed in the construction of DNA nanostructures obtained by rational sequence design and supramolecular nanostructures of peptide derivatives through self-assembly under aqueous conditions. However, orthogonal self-assembly of DNA nanostructures and supramolecular nanostructures of peptide derivatives in a single medium has not yet been explored in detail. In this study, DNA microspheres, which can be obtained from three single-stranded DNAs, and three different supramolecular nanostructures (helical nanofibers, straight nanoribbons, and flowerlike microaggregates) of semi-artificial glycopeptides were simultaneously constructed in a single medium by a simple thermal annealing process, which gives rise to hybrid soft nanomaterials. Fluorescence imaging with selective staining of each supramolecular nanostructure uncovered the orthogonal coexistence of these structures with only marginal impact on their morphology. Additionally, the biostimuli-responsive degradation propensity of each supramolecular architecture is retained, and this may allow the construction of active soft nanomaterials exhibiting intelligent biofunctions.

Light-Responsive Arylazopyrazole Gelators: From Organic to Aqueous Media and from Supramolecular to Dynamic Covalent Chemistry

Versatile photoresponsive gels based on tripodal low molecular weight gelators (LMWGs) are reported. A cyclohexane-1,3,5-tricarboxamide (CTA) core provides face-to-face hydrogen bonding and a planar conformation, inducing the self-assembly of supramolecular polymers. The CTA core was substituted with three arylazopyrazole (AAP) arms. AAP is a molecular photoswitch that isomerizes reversibly under alternating UV and green light irradiation. The E isomer of AAP is planar, favoring the self-assembly, whereas the Z isomer has a twisted structure, leading to a disassembly of the supramolecular polymers. By using tailor-made molecular design of the tripodal gelator, light-responsive organogels and hydrogels were obtained. Additionally, in the case of the hydrogels, AAP was coupled to the core through hydrazones, so that the hydrogelator and, hence, the photoresponsive hydrogel could also be assembled and disassembled by using dynamic covalent chemistry.

Epitaxial growth of dual-color-emitting organic heterostructures via binary solvent synergism driven sequential crystallization

The controlled construction of organic heterostructured architectures derived from molecules with similar nucleation thresholds and concentrations has been rare and remains a great challenge. Herein, we report a sequential epitaxial growth to synthesize dual-color-emitting organic heterostructures with 9,10-bis(phenylethynyl)anthracene (BPEA) microwire trunks and tris-(8-hydroxyquinoline)aluminium (Alq3) microstructure branches by an anti-solvent induced sequential crystallization strategy. During the epitaxial growth process, the hydrogen-bonding interactions of the anti-solvent and solvent cause a large change in the solubility and crystallization rate of BPEA and Alq3 molecules in the mixed system, which facilitates sequential crystallization of organic molecule pairs with similar nucleation thresholds and concentrations into desired heterostructures by manipulating the synergism of anti-solvents and solvents. The Förster resonant energy transfer process in heterostructures could be modulated by varying the structure of heterostructures, such as the shape, amount and angles of the branches. The present synthesis strategy provides a unique insight into the detailed formation mechanism of complex organic heterostructures, further guiding the construction of more functional heterostructure materials.

Tuning gelled lyotropic liquid crystals (LLCs) - probing the influence of different low molecular weight gelators on the phase diagram of the system H2O/NaCl-Genapol LA070

Gelled lyotropic liquid crystals (LLCs) are highly tunable multi-component materials. By studying a selection of low molecular weight gelators (LMWGs), we find gelators that form self-assembled gels in LLCs without influencing their phase boundaries. We studied the system H2O/NaCl-Genapol LA070 in the presence of (a) the organogelators 12-hydroxyoctadecanoic acid (12-HOA) and 1,3:2,4-dibenzylidene-d-sorbitol (DBS) and (b) the hydrogelators N,N'-dibenzoyl-l-cystine (DBC) and a tris-amido-cyclohexane derivative (HG1). Visual phase studies and oscillation shear frequency sweeps confirmed that 12-HOA acts as co-surfactant (stabilizing the lamellar Lα phase and destabilizing the hexagonal H1 phase), thus preventing gelation. Conversely, DBS was a potent gelator for LLCs, with the phase boundaries un-influenced by the presence of DBS; gelled lamellar Lα, and softly-gelled hexagonal H1 phases are formed. For the hydrogelator DBC, the LLC phase boundaries were only slightly altered, but no gelled LLCs were formed. For the hydrogelator HG1, however, the phase boundaries were unaffected while gelled lamellar Lα and softly-gelled hexagonal H1 phases were formed. Temperature-dependent rheology measurements demonstrated that by changing the DBS or the HG1 concentration, the sol-gel transition temperature of the gelled lamellar Lα phase can be adjusted such that (a) Tsol-gel is below the Lα-isotropic phase transition (DBS, HG1 mass fraction η = 0.0075) and (b) Tsol-gel is above the gelled Lα-isotropic phase transition (DBS, HG1 η = 0.015). This opens the possibility of temporal materials control by addressing phase transitions in different orders. As this system contains oil and water, both the organogelator DBS and the hydrogelator HG1 can gel these LLCs, but this clearly does not apply to all organogelators/hydrogelators. The study indicates that careful optimization of LMWGs is required to avoid interaction with the surfactant layer and to optimize the Tsol-gel value, which is important for the application of LMWGs in gelled LLCs.

Hierarchically Compartmentalized Supramolecular Gels through Multilevel Self-Sorting

Hierarchical compartmentalization through the bottom-up approach is ubiquitous in living cells but remains a formidable task in synthetic systems. Here we report on hierarchically compartmentalized supramolecular gels that are spontaneously formed by multilevel self-sorting. Two types of molecular gelators are formed in situ from nonassembling building blocks and self-assemble into distinct gel fibers through a kinetic self-sorting process; interestingly, these distinct fibers further self-sort into separated microdomains, leading to microscale compartmentalized gel networks. Such spontaneously multilevel self-sorting systems provide a "bottom-up" approach toward hierarchically structured functional materials and may play a role in intracellular organization.

Enhanced Mechanical and Thermal Strength in Mixed-Enantiomers-Based Supramolecular Gel

Mixing supramolecular gels based on enantiomers leads to re-arrangement of gel fibers at the molecular level, which results in more favorable packing and tunable properties. Bis(urea) compounds tagged with a phenylalanine methyl ester in racemic and enantiopure forms were synthesized. Both enantiopure and racemate compounds formed gels in a wide range of solvents and the racemate (1-rac) formed a stronger gel network compared with the enantiomers. The gel (1R+1S) obtained by mixing equimolar amount of enantiomers (1R and 1S) showed enhanced mechanical and thermal stability compared to enantiomers and racemate gels. The preservation of chirality in these compounds was analyzed by circular dichroism and optical rotation measurements. Analysis of the scanning electron microscopy (SEM) and atomic force microscopy (AFM) images revealed that the network in the mixed gel is a combination of enantiomers and racemate fibers, which was further supported by solid-state NMR. The analysis of the packing in xerogels by solid-state NMR spectra and the existence of twisted-tape morphology in SEM and AFM images confirmed the presence of both self-sorted and co-assembled fibers in mixed gel. The enhanced thermal and mechanical strength may be attributed to the enhanced intermolecular forces between the racemate and the enantiomer and the combination of both self-sorted and co-assembled enantiomers in the mixed gel.

The Twofold Role of 12-Hydroxyoctadecanoic Acid (12-HOA) in a Ternary Water-Surfactant-12-HOA System: Gelator and Co-Surfactant

Gelled lyotropic liquid crystals can be formed by adding a gelator to a mixture of surfactant and solvent. If the gel network and the liquid-crystalline phase coexist without influencing each other, the self-assembly is called orthogonal. In this study, the influence of the organogelator 12-hydroxyoctadecanoic acid (12-HOA) on the lamellar and hexagonal liquid crystalline phases of the binary system H₂O–C₁₂E₇ (heptaethylene glycol monododecyl ether) is investigated. More precisely, we added 12-HOA at mass fractions from 0.015 to 0.05 and studied the resulting phase diagram of the system H₂O–C₁₂E₇ by visual observation of birefringence and by ²H NMR spectroscopy. In addition, the dynamic shear moduli of the samples were measured in order to examine their gel character. The results show that 12-HOA is partly acting as co-surfactant, manifested by the destabilization of the hexagonal phase and the stabilization of the lamellar phase. The higher the total surfactant concentration, the more 12-HOA is incorporated in the surfactant layer. Accordingly, its gelation capacity is substantially reduced in the surfactant solution compared to the system 12-HOA–n-decane, and large amounts of gelator are required for gels to form, especially in the lamellar phase.

Commercially Relevant Orthogonal Multi-Component Supramolecular Hydrogels for Programmed Cell Growth

This study reports the ability of synthetically simple, commercially viable sugar-derived 1,3:2,4-dibenzylidenesorbitol-4',4"-diacylhydrazide (DBS-CONHNH₂ ) to support cell growth. Simple mixing and orthogonal self-sorting can formulate heparin, agarose, and heparin-binding micelles into these gels-easily incorporating additional function. Interestingly, the components used in the gel formulation, direct the ability of cells to grow, meaning the chemical programming of these multi-component gels is directly translated to the biological systems in contact with them. This simple approach has potential for future development in regenerative medicine.

Short Oligopeptides for Biocompatible and Biodegradable Supramolecular Hydrogels

Short Phe-rich oligopeptides, consisting of only four and five amino acids, worked as effective supramolecular hydrogelators for buffer solutions at low gelator concentrations (0.5-1.5 wt %). Among 10 different oligopeptides synthesized, peptide P1 (Ac-Phe-Phe-Phe-Gly-Lys) showed high gelation ability. Transmission electron microscopy observations suggested that the peptide molecules self-assembled into nanofibrous networks, which turned into gels. The hydrogel of peptide P1 showed reversible thermal gel-sol transition and viscoelastic properties typical of a gel. Circular dichroism spectra revealed that peptide P1 formed a β-sheetlike structure, which decreased with increasing temperature. The self-assembly of peptide P1 occurred even in the presence of nutrients in culture media and common surfactants. Escherichia coli and yeast successfully grew on the hydrogel. The hydrogel exhibited low cytotoxicity to animal cells. Finally, we demonstrated that functional compounds can be released from the hydrogel in different manners based on the interaction between the compounds and the hydrogel.

Solvent Mixing To Induce Molecular Motor Aggregation into Bowl-Shaped Particles: Underlying Mechanism, Particle Nature, and Application To Control Motor Behavior

Control over dynamic functions in larger assemblies is key to many molecular systems, ranging from responsive materials to molecular machines. Here we report a molecular motor that forms bowl-shaped particles in water and how confinement of the molecular motor affects rotary motion. Studying the aggregation process in a broader context, we provide evidence that, in the case of bowl-shaped particles, the structures are not the product of self-assembly, but a direct result of the mixing a good solvent and a (partial) non-solvent and highly independent of the molecular design. Under the influence of the non-solvent, droplets are formed, of which the exterior is hardened due to the increase in the glass transition temperature by the external medium, while the interior of the droplets remains plasticized by the solvent, resulting in the formation of stable bowl-shaped particles with a fluid interior, a glass-like exterior, and a very specific shape: dense spheres with a hole in their side. Applying this to a bulky first-generation molecular motor allowed us to change its isomerization behavior. Furthermore, the motor shows in situ photo-switchable aggregation-induced emission. Strong confinement prohibits the thermal helix inversion step while altering the energy barriers that determine the rotary motion, such that it introduces a reverse trans- cis isomerization upon heating. These studies show a remarkable control of forward and backward rotary motion by simply changing solvent ratios and extent of confinement.

Multicomponent peptide assemblies

Self-assembled peptide nanostructures have been increasingly exploited as functional materials for applications in biomedicine and energy. The emergent properties of these nanomaterials determine the applications for which they can be exploited. It has recently been appreciated that nanomaterials composed of multicomponent coassembled peptides often display unique emergent properties that have the potential to dramatically expand the functional utility of peptide-based materials. This review presents recent efforts in the development of multicomponent peptide assemblies. The discussion includes multicomponent assemblies derived from short low molecular weight peptides, peptide amphiphiles, coiled coil peptides, collagen, and β-sheet peptides. The design, structure, emergent properties, and applications for these multicomponent assemblies are presented in order to illustrate the potential of these formulations as sophisticated next-generation bio-inspired materials.

Cooperative Assembly of a Peptide Gelator and Silk Fibroin Afford an Injectable Hydrogel for Tissue Engineering

Silk fibroin (SF) from Bombyx mori has received increasing interest in biomedical fields, because of its slow biodegradability, good biocompatibility, and low immunogenicity. Although SF-based hydrogels have been studied intensively as a potential matrix for tissue engineering, weak gelation performance and low mechanical strength are major limitations that hamper their widespread applicability. Therefore, searching for new strategies to improve the SF gelation property is highly desirable in tissue engineering research. Herein, we report a facile approach to induce rapid gelation of SF by a small peptide gelator (e.g., NapFF). Following the simple mixing of SF and NapFF in water, a stable hydrogel of SF was obtained in a short time period at physiological pH, and the minimum gelation concentration of SF can reach as low as 0.1%. In this process of gelation, NapFF not only can behave itself as a gelator for supramolecular self-assembly, but also can trigger the conformational transition of the SF molecule from random coil to β-sheet structure via hydrophobic and hydrogen-bonding interactions. More importantly, for the generation of a scaffold with favorable cell-surface interactions, a new peptide gelator (NapFFRGD) with Arg-Gly-Asp (RGD) domain was applied to functionalize SF hydrogel with improved bioactivity for cell adhesion and growth. Following encapsulating the vascular endothelial growth factor (VEGF), the SF gel was subcutaneously injected in mice, and served as an effective matrix to trigger the generation of new blood capillaries in vivo.

Chiral Assembly Preferences and Directing Effects in Supramolecular Two-Component Organogels

The impact of chirality on the self-assembly of supramolecular gels is of considerable importance, as molecular-scale programming can be translated into nanostructuring and ultimately affect macroscopic performance. This paper explores the effect of chirality on the assembly of two-component gels comprised of a second-generation dendritic lysine peptide acid, containing three chiral centres, and an amine. This combination forms an acid⁻amine complex that assembles into nanofibres through peptide-peptide hydrogen bonds, leading to organogels. With achiral amines, a racemic mixture of l,l,l and d,d,d dendritic peptide acids surprisingly forms the best gels-more commonly, mixing enantiomers suppresses gelation. Thermodynamic studies demonstrate that depending on the amine, the greater stability of heterochiral gels can either be entropically or enthalpically driven. With amines possessing "R" chirality, the l,l,l peptide acid consistently forms more effective gels than its d,d,d analogue. Furthermore, in mixed gels, l,l,l sometimes imposes its assembly preference onto d,d,d. In summary, this paper demonstrates a rare example in which heterochiral gels are preferred, and also explores directing effects when each component in a two-component gel is chiral.

Gelling Lamellar Phases of the Binary System Water-Didodecyldimethylammonium Bromide with an Organogelator

Does the presence of a gel network influence the properties of a lyotropic liquid crystal? Does the replacement of oil by a lyotropic liquid crystal influence the properties of an organogel? To answer these questions we study gelled lyotropic liquid crystals (LLC). In the present study we show that it is possible to gel the lamellar phase of the binary system water-didodecyl dimethylammonium bromide (2C₁₂DAB) with the organogelator 12-hydroxyoctadecanoic acid (12-HOA). We compare various properties of the gelled LLC phases with the "parent systems", i.e., with the binary organogel consisting of n-decane-12-HOA and with the nongelled LC phases, respectively. Optical and electron microscopy, differential scanning calorimetry (DSC), rheometry, as well as small and wide-angle X-ray scattering (SWAXS) proved the coexistence of an L_α phase and a 12-HOA gel network in the gelled L_α phase. However, a small influence of the L_α phase on the gel properties was seen, namely slightly lower sol-gel transition temperatures and viscoelastic moduli of the gelled L_α phase compared to the binary gel. On the other hand, the presence of the gel also has an influence on the L_α phase: the interlayer spacing of the surfactant bilayers in the gelled L_α phases is slightly larger compared to the nongelled L_α phases, which is due to mixing part of the 12-HOA molecules in the L_α bilayers. Despite this mutual influence the structures of both the L_α phase and the gel network are hardly disturbed in the gelled L_α phase, i.e., that the self-assembly of the surfactant and of the gelator molecules clearly occur in an orthogonal way.

Multi-component hybrid hydrogels - understanding the extent of orthogonal assembly and its impact on controlled release

This paper reports self-assembled multi-component hybrid hydrogels including a range of nanoscale systems and characterizes the extent to which each component maintains its own unique functionality, demonstrating that multi-functionality can be achieved by simply mixing carefully-chosen constituents. Specifically, the individual components are: (i) pH-activated low-molecular-weight gelator (LMWG) 1,3;2,4-dibenzylidenesorbitol-4',4''-dicarboxylic acid (DBS-COOH), (ii) thermally-activated polymer gelator (PG) agarose, (iii) anionic biopolymer heparin, and (iv) cationic self-assembled multivalent (SAMul) micelles capable of binding heparin. The LMWG still self-assembles in the presence of PG agarose, is slightly modified on the nanoscale by heparin, but is totally disrupted by the micelles. However, if the SAMul micelles are bound to heparin, DBS-COOH self-assembly is largely unaffected. The LMWG endows hybrid materials with pH-responsive behavior, while the PG provides mechanical robustness. The rate of heparin release can be controlled through network density and composition, with the LMWG and PG behaving differently in this regard, while the presence of the heparin binder completely inhibits heparin release through complexation. This study demonstrates that a multi-component approach can yield exquisite control over self-assembled materials. We reason that controlling orthogonality in such systems will underpin further development of controlled release systems with biomedical applications.