Metal-organic frameworks: opportunities for catalysis

Transitioning metal-organic frameworks from the laboratory to market through applied research

Metal-organic frameworks (MOFs) have captivated researchers for over 25 years, yet few have successfully transitioned to commercial markets. This Perspective elucidates the progress, challenges and opportunities in moving MOFs to market, focusing on applied research. The five applied research steps that enable technology development and demonstration are reviewed: synthesis, forming, processing (washing and activation), prototyping and compliance. Furthermore, the importance of a comprehensive techno-economic analysis incorporating a complete picture of costs and revenues is discussed. Readers can use the understanding of applied research presented herein to tackle their MOF commercialization challenges.

MOF-derived cobalt-iron containing nanocomposite with cascade-catalytic activities for multimodal synergistic tumor therapy

Reactive oxygen species (ROS)-driven chemodynamic therapy has emerged as a promising anti-tumor strategy. However, the insufficient hydrogen peroxide (H2O2) supply in tumor microenvironment results in a low Fenton reaction rate and subsequently poor ROS production and therapeutic efficacy. Herein, we report on a new nanocomposite MIL-53@ZIF-67/S loaded with doxorubicin and glucose oxidase, which is decomposed under the acidic tumor microenvironment to release Fe3+, Co3+, glucose oxidase, and doxorubicin. The released content leads to synergistic anti-tumor effect through the following manners: 1) doxorubicin is directly used for chemotherapy; 2) Fe3+and Co3+ result in glutathione depletion and Fenton reaction activation through Fe2+ and Co2+ generation to achieve chemodynamic therapy; 3) glucose oxidase continuously catalyzes glucose consumption to induce starvation of the cancer cells, and 4) at the same time the produced gluconic acid and H2O2 significantly promote Fenton reaction and further boost chemodynamic therapy. This work not only demonstrates the high anti-tumor effect of the new nanocomposite, but also provides an innovative strategy for the development of a multi-in-one nanoplatform for cancer therapy.

Facile construction of copper-doped metal organic framework as a novel visible light-responsive photocatalyst for contaminant degradation

ABSTRACTMetal-organic frameworks (MOFs) with photocatalytic activity have garnered significant attentions in environmental remediation. Herein, copper-doped zeolitic imidazolate framework-7 (Cu-doped ZIF-7) was synthesized rapidly and easily using a microwave-assisted technique. Various analytical and spectroscopic methods were employed to access the framework, morphology, light absorption, photo-electrochemical and photocatalytic performance of the synthesized materials. Compared to ZIF-7, Cu/ZIF-7 (molar ratio of Cu2+ to Zn2+ is 1:1) demonstrates superior visible light absorption ability, narrower band gap, enhanced charge separation capability, and reduced electron-hole recombination performance. Under visible light irradiation, Cu/ZIF-7 serves as a Fenton-like catalyst and demonstrates exceptional activity for contaminant degradation, while virgin ZIF-7 remains inactive. With the addition of 9.8 mmol H2O2 and exposure to visible light for 30 min, 10 mg of Cu/ZIF-7 can completely decompose RhB solution (10 mg/L, 50 mL). The synergistic effect of the Cu/ZIF-7/H2O2/visible light system is attributed to visible light photocatalysis and Fenton-like reactions. Cu/ZIF-7 demonstrates excellent catalytic performance stability, with only a slight decrease in degradation efficiency from an initial 97.0% to 95.4% over four cycles. Additionally, spin-trapping ESR measurements and active species trapping experiments revealed that h+ and ·OH occupied a significant position for Rhodamine B (RhB) degradation. Degradation intermediate products of Rhodamine B have been identified using UPLC-MS, and the degradation pathways have been proposed and discussed. This work offers a facile and efficient technique for developing MOF-based visible light photocatalysts for water purification.

Efficient Removal of Greenhouse Gases: Machine Learning-Assisted Exploration of Metal-Organic Framework Space

Global warming is a crisis that humanity must face together. With greenhouse gases (GHGs) as the main factor causing global warming, the adoption of relevant processes to eliminate them is essential. With the advantages of high specific surface area, large pore volume, and tunable synthesis, metal-organic frameworks (MOFs) have attracted much attention in GHG storage, adsorption, separation, and catalysis. However, as the pool of MOFs expands rapidly with new syntheses and discoveries, finding a suitable MOF for a particular application is highly challenging. In this regard, high-throughput computational screening is considered the most effective research method for screening a large number of materials to discover high-performance target MOFs. Typically, high-throughput computational screening generates voluminous and multidimensional data, which is well suited for machine learning (ML) training to improve the screening efficiency and explore the relationships between the multidimensional data in depth. This Review summarizes the general process and common methods for using ML to screen MOFs in the field of GHG removal. It also addresses the challenges faced by ML in exploring the MOF space and potential directions for the future development of ML for MOF screening. This aims to enhance the understanding of the integration of ML and MOFs in various fields and broaden the application and development ideas of MOFs.

ZIF-8 Vibrational Spectra: Peak Assignments and Defect Signals

Zeolitic imidazolate framework (ZIF-8) is a promising material for gas separation applications. It also serves as a prototype for numerous ZIFs, including amorphous ones, with a broader range of possible applications, including sensors, catalysis, and lithography. It consists of zinc coordinated with 2-methylimidazolate (2mIm) and has been synthesized with methods ranging from liquid-phase to solvent-free synthesis, which aim to control its crystal size and shape, film thickness and microstructure, and incorporation into nanocomposites. Depending on the synthesis method and postsynthesis treatments, ZIF-8 materials may deviate from the nominal defect-free ZIF-8 crystal structure due to defects like missing 2mIm, missing zinc, and physically adsorbed 2mIm trapped in the ZIF-8 pores, which may alter its performance and stability. Infrared (IR) spectroscopy has been used to assess the presence of defects in ZIF-8 and related materials. However, conflicting interpretations by various authors persist in the literature. Here, we systematically investigate ZIF-8 vibrational spectra by combining experimental IR spectroscopy and first-principles molecular dynamics simulations, focusing on assigning peaks and elucidating the spectroscopic signals of putative defects present in the ZIF-8 material. We attempt to resolve conflicting assignments from the literature and to provide a comprehensive understanding of the vibrational spectra of ZIF-8 and its defect-induced variations, aiming toward more precise quality control and design of ZIF-8-based materials for emerging applications.

The post-synthesis modification (PSM) of MOFs for catalysis

While there are myriad ways to construct metal-organic framework (MOF) based catalysts, the introduction of catalytic functionality via covalent post-synthesis functionalization (PSM) offers multiple advantages: (i) a wide range of different catalyst types are generated from a handful of well-known parent MOFs, (ii) MOF catalyst properties can be systematically tuned while changing few variables, and (iii) catalytically active functional groups that would otherwise interfere with MOF assembly can be introduced facilely. This last advantage is particularly crucial for our quest to generate MOF active sites that are decorated with multiple functional groups capable of cooperative activity, analogous to enzyme active sites.

DL_POLY Quantum 2.0: A modular general-purpose software for advanced path integral simulations

DL_POLY Quantum 2.0, a vastly expanded software based on DL_POLY Classic 1.10, is a highly parallelized computational suite written in FORTRAN77 with a modular structure for incorporating nuclear quantum effects into large-scale/long-time molecular dynamics simulations. This is achieved by presenting users with a wide selection of state-of-the-art dynamics methods that utilize the isomorphism between a classical ring polymer and Feynman's path integral formalism of quantum mechanics. The flexible and user-friendly input/output handling system allows the control of methodology, integration schemes, and thermostatting. DL_POLY Quantum is equipped with a module specifically assigned for calculating correlation functions and printing out the values for sought-after quantities, such as dipole moments and center-of-mass velocities, with packaged tools for calculating infrared absorption spectra and diffusion coefficients.

Continuous-Flow Catalysis Using Phosphine-Metal Complexes on Porous Polymers: Designing Ligands, Pores, and Reactors

Continuous-flow syntheses using immobilized catalysts can offer efficient chemical processes with easy separation and purification. Porous polymers have gained significant interests for their applications to catalytic systems in the field of organic chemistry. The porous polymers are recognized for their large surface area, high chemical stability, facile modulation of surface chemistry, and cost-effectiveness. It is crucial to immobilize transition-metal catalysts due to their difficult separation and high toxicity. Supported phosphine ligands represent a noteworthy system for the effective immobilization of metal catalysts and modulation of catalytic properties. Researchers have been actively pursuing strategies involving phosphine-metal complexes supported on porous polymers, aiming for high activities, durabilities, selectivities, and applicability to continuous-flow systems. This review provides a concise overview of phosphine-metal complexes supported on porous polymers for continuous-flow catalytic reactions. Polymer catalysts are categorized based on pore sizes, including micro-, meso-, and macroporous polymers. The characteristics of these porous polymers are explored concerning their efficiency in immobilized catalysis and continuous-flow systems.

Fe, N, S co-doped carbon network derived from acetate-modified Fe-ZIF-8 for oxygen reduction reaction

In this work, potassium acetate (KAc) was added during the synthesis of a Zn-Fe based metal-organic framework (Fe-ZIF-8) to increase the fixed amount of Fe while simultaneously enhancing the number of pores. Electrospinning was utilized to embed KAc-modified Fe-ZIF-8 (Fe-ZIF-8-Ac) into the polyacrylonitrile nanofiber mesh, to obtain a network composite (Fe@NC-Ac) with hierarchical porous structure. Fe@NC-Ac was co-pyrolyzed with thiourea, resulting in Fe, N, S co-doped carbon electrocatalyst. The electrochemical tests indicated that the prepared catalyst displayed relatively remarkable oxygen reduction reaction (ORR) catalytic activity, with an onset potential (Eonset) of 1.08 V (vs. reversible hydrogen electrode, RHE) and a half-wave potential (E1/2) of 0.94 V, both higher than those of the commercial Pt/C (Eonset = 0.95 V and E1/2 = 0.84 V), respectively. Assembled into Zn-air batteries, the optimized catalyst exhibited higher open circuit voltage (1.698 V) and peak power density (90 mW cm-2) than those of the commercial 20 wt% Pt/C (1.402 V and 80 mW cm-2), respectively. This work provided a straightforward manufacturing strategy for the design of hierarchical porous carbon-based ORR catalysts with desirable performance.

ZIF-derived oxygen vacancy-rich Co3O4 for constructing an efficient Z-scheme heterojunction to boost photocatalytic water splitting

With ZIF-67 as the precursor, oxygen vacancy-rich Co3O4 nanoparticles were derived and anchored on the surface of 2D polyimide (PI) to construct a Z-scheme hybrid heterojunction (20ZP) through a simultaneous solvothermal in situ crystallization and polymerization strategy. XRD, XPS and EPR confirmed that both Co(III) and oxygen vacancies are formed during the low temperature conversion of ZIF-67 to Co3O4 nanoparticles that in turn accelerate the polymerization of PI. Synchronous crystallization makes the interfacial architecture intermetal and compact, inducing a strong interfacial electronic interaction between Co3O4 nanoparticles and PI. UV-vis DRS spectra and transient photocurrent response demonstrate that the incorporation of Co3O4 on polyimide not only extends the light absorption in the visible range, but also enhances the charge transfer rate. EIS, TRPL techniques and DFT calculations have confirmed that the photoinduced interfacial charge transfer pathway of this hybrid heterojunction characterized the Z-scheme in which the photoinduced electrons transfer from the conduction band of Co3O4 to the valence band of PI, significantly inhibiting the recombination of electrons and holes within PI. More importantly, the oxygen vacancies located below the conductor band of Co3O4 can deepen the band bending, improve the charge separation efficiency and accelerate electron transfer between Co3O4 and PI. This Z-scheme hybrid heterojunction structure can not only maintain the high reducing capacity of photoinduced electrons on the conductor band of PI, but also enhance the oxidative capacity of the heterojunction composite material, thus promoting the overall progress of the photocatalytic hydrogen release reaction.

Design of a novel fluorescent metal-organic framework (UiO-66-NG) for the detection of boric acid in aqueous medium and bioimaging in a living plant system

UiO-66-NH2 material is a variant of Zr-based MOF most widely used for various applications, exhibiting unprecedented excellent hydrothermal and physicochemical stability. In this study, after UiO-66-NH2 reacted with chlorosulfonyl isocyanate, the fluorescent UiO-66-NG probe was prepared by interacting with the N-methylglucamine molecule. The structure of the prepared probe was confirmed by characterizing them with techniques such as FTIR, SEM, and XRD. The sensing properties of this prepared probe against different anions and cations were investigated and it was understood that it showed sensitive selectivity only for H3BO3. The H3BO3 detection limit (LOD) of the UiO-66-NG probe was determined as 1.81 μM. Boric acid was determined in real samples by using tap water, lake water, and river water. Fluorescence imaging was performed using the plant Lepidium sativum for the detection of boric acid in aqueous medium and for bio-imaging in a living plant system. These results show that the prepared UiO-66-NG can be used successfully in the determination of H3BO3 in living plants.

First-Principles Study on the Selective Separation of Toxic Gases by Mg-MOF-74

This study primarily focused on the detection and separation of toxic gases such as CO, H2S, SO2, NH3, NO, and NO2 by Mg-MOF-74, as well as assessing the stability of those toxic gases on it. The calculations were performed by using density functional theory as implemented in the Gaussian-09 and Quantum ESPRESSO suites of the program. GGA-type PBE-D2 functionals with a plane wave basis set were used in the optimization of the Mg-MOF-74 crystal, and hybrid-type B3LYP and M06 functionals with the 6-31G*basis set were used in cluster calculation. The binding energies of CO and H2S with MOF were found to be in the physisorption range, whereas the energies of SO2, NH3, NO, and NO2 were found to be in the chemisorption range. Based on binding energy, hardness, and softness studies, it was found that NO and NO2 molecules were more stable in Mg-MOF-74, suggesting that Mg-MOF-74 is a good detector for NO and NO2 molecules.

Laser-Driven Rapid Synthesis of Metal-Organic Frameworks and Investigation of UV-NIR Optical Absorption, Luminescence, Photocatalytic Degradation, and Gas and Ion Adsorption Properties

In this study, we designed a platform based on a laser-driven approach for fast, efficient, and controllable MOF synthesis. The laser irradiation method was performed for the first time to synthesize Zn-based MOFs in record production time (approximately one hour) compared to all known MOF production methods with comparable morphology. In addition to well-known structural properties, we revealed that the obtained ZnMOFs have a novel optical response, including photoluminescence behavior in the visible range with nanosecond relaxation time, which is also supported by first-principles calculations. Additionally, photocatalytic degradation of methylene blue with ZnMOF was achieved, degrading the 10 ppm methylene blue (MB) solution 83% during 1 min of irradiation time. The application of laser technology can inspire the development of a novel and competent platform for a fast MOF fabrication process and extend the possible applications of MOFs to miniaturized optoelectronic and photonic devices.

Construction of a uniform zeolitic imidazole framework (ZIF-8) nanocrystal through a wet chemical route towards supercapacitor application

Exploring larger surface area electrode materials is crucial for the development of an efficient supercapacitors (SCs) with superior electrochemical performance. Herein, a cost-effective strategy was adopted to synthesize a series of ZIF8 nanocrystals, and their size effect as a function of surface area was also examined. The resultant ZIF8-4 nanocrystal exhibits a uniform hexagonal structure with a large surface area (2800 m2 g-1) and nanometre size while maintaining a yield as high as 78%. The SCs performance was explored by employing different aqueous electrolytes (0.5 M H2SO4 and 1 M KOH) in a three-electrode set-up. The SC performance using a basic electrolyte (1 M KOH) was superior owing to the high ionic mobility of K+. The optimized ZIF8-4 nanocrystal electrode showed a faradaic reaction with a highest capacitance of 1420 F g-1 at 1 A g-1 of current density compared to other as-prepared electrodes in the three-electrode assembly. In addition, the resultant ZIF8-4 was embedded into a symmetric supercapacitor (SSC), and the device offered 350 F g-1 of capacitance with a maximum energy and power density of 43.7 W h kg-1 and 900 W kg-1 at 1 A g-1 of current density, respectively. To determine the practical viewpoint and real-world applications of the ZIF8-4 SSC device, 7000 GCD cycles were performed at 10 A g-1 of current density. Significantly, the device exhibited a cycling stability around 90% compared to the initial capacitance. Therefore, these findings provide a pathway for constructing large surface area ZIF8-based electrodes for high-value-added energy storage applications, particularly supercapacitors.

Hydrolytic nanozymes: Preparation, properties, and applications

Hydrolytic nanozymes, as promising alternatives to hydrolytic enzymes, can efficiently catalyze the hydrolysis reactions and overcome the operating window limitations of natural enzymes. Moreover, they exhibit several merits such as relatively low cost, easier recovery and reuse, improved operating stability, and adjustable catalytic properties. Consequently, they have found relevance in practical applications such as organic synthesis, chemical weapon degradation, and biosensing. In this review, we highlight recent works addressing the broad topic of the development of hydrolytic nanozymes. We review the preparation, properties, and applications of six types of hydrolytic nanozymes, including AuNP-based nanozymes, polymeric nanozymes, surfactant assemblies, peptide assemblies, metal and metal oxide nanoparticles, and MOFs. Last, we discuss the remaining challenges and future directions. This review will stimulate the development and application of hydrolytic nanozymes.

AIE Ligand-Based Luminescent Ln-MOFs for Rapid and Selective Sensing of Tetracycline

The design of highly stable and dual-emission lanthanide metal-organic frameworks (Ln-MOFs) is promising for practical chemical sensor applications. Rational design and synthesis of photoresponsive organic ligands provide a feasible approach to achieving highly fluorescent dual-emission Ln-MOFs. In this study, a tetraphenylpyrazine-based AIE ligand, H4L, was synthesized and combined with lanthanide ions (including Sm3+, Eu3+, Gd3+, and Tb3+) to fabricate a series of Ln-MOFs named Ln-L. The single-crystal analysis revealed that all Ln-L belonged to the tetragonal space group P4212 and featured a 2-fold interpenetrated 3D structure. Leveraging rational design, Eu-L exhibited a sensitive response to tetracycline, making it a promising fluorescence sensor for tetracycline detection. The experiments demonstrated that Eu-L could rapidly and quantitatively detect tetracycline and its analogs within 30 s. The lowest detection limits for tetracycline, oxytetracycline, and chlortetracycline were 0.43, 0.92, and 0.81 μM, respectively. Additionally, the probe displayed excellent reusability and exceptional selectivity. A plausible sensing mechanism was proposed, supported by both experimental and theoretical analyses. Furthermore, the study discovered that on-site and real-time determination of TCs in aqueous solutions could be achieved by using luminescence test papers and composite films derived from Eu-L.

Heterogenization of molecular catalysts within porous solids: the case of Ni-catalyzed ethylene oligomerization from zeolites to metal-organic frameworks

The last decade has seen a tremendous expansion of the field of heterogenized molecular catalysis, especially with the growing interest in metal-organic frameworks and related porous hybrid solids. With successful achievements in the transfer from molecular homogeneous catalysis to heterogenized processes come the necessary discussions on methodologies used and a critical assessment on the advantages of heterogenizing molecular catalysis. Here we use the example of nickel-catalyzed ethylene oligomerization, a reaction of both fundamental and applied interest, to review heterogenization methodologies of well-defined molecular catalysts within porous solids while addressing the biases in the comparison between original molecular systems and heterogenized counterparts.

Synthesis and analytical characterization of Ca-BTC metal organic framework

Metal Organic framework (MOF) has been a class of great interest during the past few years owing to its decidedly applicative, easily synthesized and improved characteristics. Ca-BTC MOF is synthesized by Hydrothermal technique and reported for the first time. Its structural morphology was analyzed using XRD, SEM, and EDS, showing the tetragonal crystal structure having grain size of 24.92 nm and purity of sample respectively. FTIR, Raman Spectroscopy ensures the metal organic framework between Calcium and the tri-carboxylic group. Photoluminescence measures the energy gap of 3.792 eV, showing approximately the semiconducting behavior of synthesized material. Zeta potential having value of -13.5 mV confirms the instability having good microbial activity and conductivity i.e 0.290 mS/cm which reveals important insights into its electrical properties.

An efficient synthesis and characterization of La@MOF-808: A promising strategy for effective arsenic ion removal from water

Addressing serious waterborne arsenic issues, for the first time, lanthanum-doped MOF-808 (La@MOF-808) has been developed to remove total arsenic (Total As) and arsenite [As(III)] from water. This study involves the solvothermal synthesis of La@MOF-808, its characterization via FTIR, XRD, TGA, and SEM, in which distinct physicochemical attributes were identified, and the adsorption capacity of arsenic ions. The saturated adsorption capacity of La@MOF-808 for Total As and As(III) reached 282.9 mg g-1 and 283.5 mg g-1, as compared to 229.7 mg g-1 and 239.1 mg g-1 for pristine MOF-808, respectively. XRD and ATR-FTIR analyses underscored the central roles of electrostatic interactions and hydroxyl groups in the pollutant adsorption process. The impact of temperature, concentration, pH, and exposure duration times on adsorption performance was thoroughly investigated. The Langmuir model showed the maximum adsorption capacities (qmax) of La@MOF-808 was 307.7 mg g-1 for Total As and 325.7 mg g-1 for As(III), surpassing those of MOF-808 adsorbent, which suggests that monolayer adsorption occurred. Optimal adsorption was observed in a pH range of 2.0-7.0, and thermodynamic studies classified the process as spontaneous and endothermic. The adsorbent retains high capacity across repeated cycles, outperforming many standard adsorbents. Lanthanum doping markedly enhances MOF-808's arsenic removal, underscoring its potential for water treatment.

Recent Advances in the Catalytic Conversion of Methane to Methanol: From the Challenges of Traditional Catalysts to the Use of Nanomaterials and Metal-Organic Frameworks

Methane and carbon dioxide are the main contributors to global warming, with the methane effect being 25 times more powerful than carbon dioxide. Although the sources of methane are diverse, it is a very volatile and explosive gas. One way to store the energy content of methane is through its conversion to methanol. Methanol is a liquid under ambient conditions, easy to transport, and, apart from its use as an energy source, it is a chemical platform that can serve as a starting material for the production of various higher-value products. Accordingly, the transformation of methane to methanol has been extensively studied in the literature, using traditional catalysts as different types of zeolites. However, in the last few years, a new generation of catalysts has emerged to carry out this transformation with higher conversion and selectivity, and more importantly, under mild temperature and pressure conditions. These new catalysts typically involve the use of a highly porous supporting material such as zeolite, or more recently, metal-organic frameworks (MOFs) and graphene, and metallic nanoparticles or a combination of different types of nanoparticles that are the core of the catalytic process. In this review, recent advances in the porous supports for nanoparticles used for methane oxidation to methanol under mild conditions are discussed.

Amino-induced cadmium metal-organic framework based on thiazole ligand as a heterogeneous catalyst for the epoxidation of alkenes

Selective epoxidation of olefins is of high interest in the chemical industry due to the many applications of epoxides. This study reports on the synthesis of Cd-MOF, [Cd(DPTTZ)(5-AIP)] (IUST-1) (where DPTTZ = 2, 5-di (pyridine-4-yl) thiazolo [5, 4-d] thiazole, 5-AIP = 5-Aminoisophthalic acid), by a reflux method, which can be considered as a fast and simple process. The morphology and structure of the synthesized IUST-1 were determined by using FE-SEM (Field Emission Scanning Electron Microscopy), EDX (Energy Dispersive Analysis of X-ray), Mapping (Elemental Mapping), CHNS (Elemental analysis), XRD (X-Ray Diffraction), FT-IR (Fourier Transform Infrared), and TGA (Thermo Gravimetric Analysis). The epoxidation of cyclooctene was investigated using the activity of catalytic IUST-1. The results showed that in the presence of tert-butyl hydroperoxide and CCl4 in a 1:2 alkene/oxidant ratio, a high epoxide yield (99.8%) was obtained. In addition, IUST-1 can be easily separated by simple filtration and recycled five times successfully with a slight decrease in activity. This compound has some advantages such as high yield, short reaction time, and ease of reuse, which make it a suitable heterogeneous catalyst for the epoxidation of cyclooctene.

Metal-Organic Frameworks/Graphdiyne/Copper Foam Composite Membranes for Catalytic Applications

Graphdiyne (GDY) with a three-dimensional network structure was synthesized on a copper foam (CF) via an in situ Glaser-Hay coupling reaction. A metal-organic framework/GDY composite membrane was designed and synthesized for the first time. CF serves as a template and catalyst for the directed polymerization of GDY membranes. The catalytic activities of HKUST-1/GDY/CF membrane in wet peroxide oxidation of phenol, oxidation of benzyl alcohol, and ring opening of epoxide were studied. The composite membrane has the advantages of appropriateness for continuous operation, simple use process, easy recycling, high catalytic efficiency, etc. It was found that the incorporation of GDY can facilitate electron transfer and effectively improve the catalytic activity of HKUST-1 in membrane catalysis.

as a Versatile and Predictable Chiral Stationary Phase for the Resolution of Racemic Mixtures

Metal-organic frameworks (MOFs) have become promising materials for multiple applications due to their controlled dimensionality and tunable properties. The incorporation of chirality into their frameworks opens new strategies for chiral separation, a key technology in the pharmaceutical industry as each enantiomer of a racemic drug must be isolated. Here, we describe the use of a combination of computational modeling and experiments to demonstrate that high-performance liquid chromatography (HPLC) columns packed with TAMOF-1 as the chiral stationary phase are efficient, versatile, robust, and reusable with a wide array of mobile phases (polar and non-polar). As proof of concept, in this article, we report the resolution with TAMOF-1 HPLC columns of nine racemic mixtures with different molecular sizes, geometries, and functional groups. Initial in silico studies allowed us to predict plausible separations in chiral compounds from different families, including terpenes, calcium channel blockers, or P-stereogenic compounds. The experimental data confirmed the validity of the models and the robust performance of TAMOF-1 columns. The added value of in silico screening is an unprecedented achievement in chiral chromatography.

When Coordination Polymers Meet Wood: From Molecular Design toward Sustainable Solar Desalination

Solar-driven interfacial evaporation harnessing solar energy on a water surface provides a sustainable and economic means to efficiently capture freshwater from nontraditional water sources. Endowed with a hierarchical porous structure and mechanical stability, wood-based evaporators represent a renewable alternative to petroleum-based materials. Nonetheless, incidental inferiorities of a low evaporation rate and weak interfacial strength are challenging to overcome. Herein, we propose the usage of chemically stable coordination polymers (Ni-dithiooxamidato, Ni-DTA) as hydrophilic photothermal nanomaterials for the molecular design of robust wood-based evaporators with improved performance. In situ synthesis of Ni-DTA onto the channel wall of balsawood provides sufficient photothermal domains that localize the converted energy for facilitated interfacial evaporation. A rational control of methanol/dimethylformamide ratios enables the coexistence of 1D-nanofibers and 0D-nanoparticles, endowing Balsa-NiDTA with a high evaporation rate of 2.75 kg m-2 h-1 and an energy efficiency of 82% under one-sun illumination. Experimental and simulation results reveal that Ni-DTA polymers with strong hydration ability decrease the equivalent evaporation enthalpy induced by decreased H-bonding density of water molecules near the evaporation interface. The Balsa-NiDTA evaporator showed a high chemical stability, mainly due to the robust Ni-S/Ni-N bonds and the superior cellulose affinity of Ni-DTA. Furthermore, the Balsa-NiDTA evaporator shows an excellent antibacterial activity and low oil-fouling propensity. This work presents a facile and mild strategy to design chemically stable wood-based evaporators, contributing to highly efficient and sustainable solar desalination under harsh conditions.

Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks

Thermocatalysis of CO2 into high valuable products is an efficient and green method for mitigating global warming and other environmental problems, of which Noble-metal-free metal-organic frameworks (MOFs) are one of the most promising heterogeneous catalysts for CO2 thermocatalysis, and many excellent researches have been published. Hence, this review focuses on the valuable products obtained from various CO2 conversion reactions catalyzed by noble-metal-free MOFs, such as cyclic carbonates, oxazolidinones, carboxylic acids, N-phenylformamide, methanol, ethanol, and methane. We classified these published references according to the types of products, and analyzed the methods for improving the catalytic efficiency of MOFs in CO2 reaction. The advantages of using noble-metal-free MOF catalysts for CO2 conversion were also discussed along the text. This review concludes with future perspectives on the challenges to be addressed and potential research directions. We believe that this review will be helpful to readers and attract more scientists to join the topic of CO2 conversion.

Application of Zr-MOFs based copper complex in synthesis of pyrazolo[3, 4-b]pyridine-5-carbonitriles via anomeric-based oxidation

In this research article, Zr-MOFs based copper complex as a novel heterogeneous and porous catalyst was designed and prepared. The structure of catalyst has verified by various techniques such as FT-IR, XRD, SEM, N₂ adsorption-desorption isotherms (BET), EDS, SEM-elemental mapping, TG and DTG analysis. UiO-66-NH₂/TCT/2-amino-Py@Cu(OAc)₂ was used as an efficient catalyst in the synthesis of pyrazolo[3,4-b]pyridine-5-carbonitrile derivatives. The aromatization of titled molecules is performed via a cooperative vinylogous anomeric-based oxidation both under air and inert atmospheres. The unique properties of the presented method are short reaction time, high yield, reusability of catalyst, synthesis of desired product under mild and green condition.

MOF-Fabric Composites Based on a Multi-Functional MOF as Luminescent Sensors for a Neurotransmitter and an Anti-Cancer Drug

A biocompatible, reliable, fast, and nanomolar-level dual-functional sensor for a neurotransmitter (e.g., adrenaline) and an anti-cancer drug (e.g., 6-mercaptopurine (6-MP)) is still far away from the hand of modern-day researchers. To address this issue, we synthesized an aqua-stable, bio-friendly, thiourea-functionalized Zr(IV) metal-organic framework (MOF) for selective, rapid sensing of adrenaline and 6-MP with ultra-low limit of detection (LOD for adrenaline = 1.9 nM and LOD for 6-MP = 28 pM). This is the first MOF-based fluorescent sensor of both the targeted analytes. The sensor not only can detect adrenaline in HEPES buffer medium but also in different bio-fluids (e.g., human urine and blood serum) and pH media. It also exhibited 6-MP sensing ability in aqueous medium and in various wastewater specimens and pH solutions. For the quick and on-site detection of this neuro-messenger (adrenaline) and the drug (6-MP), cost-effective sensor-coated cotton fabric composites were fabricated. The MOF@cotton fabric composite is capable of detecting both the analytes up to the nanomolar level by the naked eye under UV light. The sensor can be recycled up to five times without significantly losing its efficiency. The Förster resonance energy transfer in the presence of adrenaline and inner-filter effect in the presence of 6-MP are the most likely reasons behind the quenching of the MOF's fluorescence intensity, which were proved with the help of appropriate instrumental techniques.

Coordination-Induced Symmetry Breaking on Metal-Porphyrinic Framework Thin Films for Enhanced Nonlinear Optical Limiting

Structural asymmetry affecting the nonlinear optics (NLO) of metal-organic frameworks (MOFs) is very important in fundamentals and applications but is still a challenge. Herein we develop a series of indium-porphyrinic framework (InTCPP) thin films and provide the first study on the coordination-induced symmetry breaking on their third-order NLO. The continuous and oriented InTCPP(H₂) thin films were grown on quartz substrates and then postcoordinated with different cations (Fe²⁺ or Fe³⁺Cl^-) in InTCPP(H₂) (named InTCPP(Fe²⁺) and InTCPP(Fe³⁺Cl^-)). The third-order NLO results reveal the Fe²⁺ and Fe³⁺Cl^- coordinated InTCPP thin films have substantially enhanced NLO performance. Moreover, InTCPP(Fe³⁺Cl^-) thin films cause symmetry breaking of microstructures, resulting in a 3-fold increase in the nonlinear absorption coefficient (up to 6.35 × 10^-6 m/W) compared to InTCPP(Fe²⁺). This work not only develops a series of nonlinear optical MOF thin films but also provides new insight into symmetry breaking on MOFs for nonlinear optoelectronic applications.

Gas-phase organometallic catalysis in MFM-300(Sc) provided by switchable dynamic metal sites

MFM-300(Sc) was explored as a catalyst for the gas-phase hydrogenation of acetone. The catalysis results support the presence of non-permanent open Sc(III) sites within the structure due to the requirement of Lewis acid sites for the reaction to proceed. The open Sc(III) sites are generated in situ due to the presence of hemilabile Sc-O bonds. MFM-300(Sc) showed high mechanical and chemical stability, and the crystalline structure was maintained after the catalytic reaction. The catalytic activity of the material was quantified by performing a gas-phase reaction using a continuous flow reactor. The acetone conversion in MFM-300(Sc) was estimated to be 27.7% with no loss of activity after catalytic cycles.

A chiral metal-organic framework {(HQA)(ZnCl2)(2.5H2O)}n for the enantioseparation of chiral amino acids and drugs

Chiral metal-organic frameworks (CMOFs) with enantiomeric subunits have been employed in chiral chemistry. In this study, a CMOF formed from 6-methoxyl-(8S,9R)-cinchonan-9-ol-3-carboxylic acid (HQA) and ZnCl₂, {(HQA)(ZnCl₂)(2.5H₂O)}_n, was constructed as a chiral stationary phase (CSP) via an in situ fabrication approach and used for chiral amino acid and drug analyses for the first time. The {(HQA)(ZnCl₂)(2.5H₂O)}_n nanocrystal and the corresponding chiral stationary phase were systematically characterised using a series of analytical techniques including scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, circular dichroism, X-ray photoelectron spectroscopy, thermogravimetric analysis, and Brunauer-Emmett-Teller surface area measurements. In open-tubular capillary electrochromatography (CEC), the novel chiral column exhibited strong and broad enantioselectivity toward a variety of chiral analytes, including 19 racemic dansyl amino acids and several model chiral drugs (both acidic and basic). The chiral CEC conditions were optimised, and the enantioseparation mechanisms are discussed. This study not only introduces a new high-efficiency member of the MOF-type CSP family but also demonstrates the potential of improving the enantioselectivities of traditional chiral recognition reagents by fully using the inherent characteristics of porous organic frameworks.

Porous and Stable Zn-Series Metal-Organic Frameworks as Efficient Catalysts for Grafting Wood Nanofibers with Polycaprolactone via a Copolymerization Approach

A hydrothermal method was used to synthesize two highly stable Zn(II) metal-organic frameworks (MOFs), namely, [Zn₂(L)₂(HIPA)]_n (1) and [Zn₉(L)₆(BTEC)₃(H₂O)₄·6H₂O]_n (2) (HL = 3-amino-1H-1,2,4-triazole, H₂HIPA = 5-hydroxyisophthalic acid, H₄BTEC = benzene-1,2,4,5-tetracarboxylic acid). The physicochemical properties of 1 and 2 were characterized using a range of analytical techniques. The scanning electron microscopy images confirmed the stability of the MOFs under heating at 120 °C for 12 h. Following their preparation, the two MOFs were used as catalysts in the grafting of poly(ε-caprolactone) on wood nanofibers (WNFs) by means of a homogeneous ring-opening polymerization protocol in an ionic liquid. The grafting ratio achieved using catalyst 1 was higher than that achieved for catalyst 2, wherein a maximum of 92.43% was obtained using the former. Under comparable reaction conditions, the grafting ratio of 1 was found to be significantly higher than those achieved using 4-dimethylamino pyridine, Sn(Oct)₂, and UiO-67 catalysts. In addition, fluorescence emission was detected from the residual catalysts present in the products. The calculated electrostatic potentials and average local ionization energies indicated that the grafting of ε-caprolactone on the WNFs follows a "coordination-insertion" mechanism. Overall, these two new and efficient MOF catalysts have the potential to replace highly toxic traditional catalysts in polymerization reactions. The grafted cellulose material with fluorescence emission may also be suitable for use in biomedical applications.

Rational design of mesoporous chiral MOFs as reactive pockets in nanochannels for enzyme-free identification of monosaccharide enantiomers

Monosaccharides play significant roles in daily metabolism in living organisms. Although various devices have been constructed for monosaccharide identification, most rely on the specificity of the natural enzyme. Herein, inspired by natural ionic channels, an asymmetrical MOF-in-nanochannel architecture is developed to discriminate monosaccharide enantiomers based on cascade reactions by combining oxidase-mimicking and Fenton-like catalysis in homochiral mesoporous CuMOF pockets. The identification performance is remarkably enhanced by the increased oxidase-mimicking activity of Au nanoparticles under a local surface plasmon resonance (LSPR) excitation. The apparent steady-state kinetic parameters and nano-fluidic simulation indicate that the different affinities induced by Au-LSPR excitation and the confinement effect from MOF pockets precipitate the high chiral sensitivity. This study offers a promising strategy for designing an enantiomer discrimination device and helps to gain insight into the origin of stereoselectivity in a natural enzyme.

Electrodeposition of Ag/ZIF-8-Modified Membrane for Water Remediation

Metal-organic framework (MOF)-based membranes have been widely used in gas and liquid separation due to their porous structures and tunable compositions. Depending on the guest components, heterostructured MOFs can exhibit multiple functions. In the present work, we report a facile and rapid preparation of zeolitic imidazolate framework-8 (ZIF-8) and silver nanoparticle incorporated ZIF-8 (Ag/ZIF-8)-based membranes on stainless-steel mesh (SSM) through a "green" electrodeposition method. The SSM was first coated with a Zn-plated layer which contains mainly zinc hydroxide nitrate (Zn₅(OH)₈(NO₃)₂·2H₂O) with a "leaf-like" morphology, providing anchoring points for the deposition of ZIF-8 and Ag/ZIF-8. It takes only 10 min to prepare a uniform coating of Zn₅(OH)₈(NO₃)₂·2H₂O in aqueous conditions without the use of a strong base; this is by far the most efficient way of making zinc hydroxide nitrate nanocrystals. Following a similar electrodeposition approach, ZIF-8 and Ag/ZIF-8-coated SSM can be prepared within 20 min by applying a small current. The encapsulation of Ag does not alter the chemical composition nor the crystal structure of ZIF-8. The resulting ZIF-8 and Ag/ZIF-8-coated SSM have been tested for their effectiveness for rhodamine B dye removal in a fast vacuum filtration setting. Additionally, growth of E. coli was significantly inhibited after overnight incubation with Ag/ZIF-8-coated SSM. Overall, we demonstrate a fast synthesis procedure to make ZIF-8 and Ag/ZIF-8-coated SSM membranes for organic dye removal with excellent antimicrobial activity.

Two pillared-layer metal-organic frameworks based on the pinwheel trinuclear carboxylate-clusters of Zn(II) and Co(II): synthesis, crystal structures, magnetic study, and Lewis acid catalysis

Using a dicarboxylic acid, [1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂L1) and an exobidentate ligand, (1E,1'E)-N,N'-(1,4-phenylene)bis(1-(pyridin-4-yl)methanimine) (L2), two 3D interpenetrated networks, {[Zn₃(L1)₃(L2)]·9H₂O}_n (Zn-MOF) and {[Co₃(L1)₃(L2)(DMF)]·0.5DMF}_n (Co-MOF), have been prepared in good yields. The crystal structure analysis of Zn-MOF and Co-MOF revealed that both have a 3D pillared-layer structure based on pinwheel trinuclear metal-carboxylate clusters as secondary building units (SBUs). Furthermore, the structures also exhibited three-fold interpenetration. Although the overall networks in Zn-MOF and Co-MOF showed significant resemblances, there are marked differences in their crystal structures, which are associated with the coordination environment of the metal centre and the binding modes of the carboxylates. Gas adsorption studies (N₂ at 77 K and 1 bar) indicated that Co-MOF is more porous than Zn-MOF. Magnetic measurements on Co-MOF indicate a significant antiferromagnetic interaction (45 K to 303 K) between trimeric Co(II) S = 3/2 spins through syn-syn carboxylato bridges. Both MOFs were studied for the Lewis acid catalyzed Knoevenagel condensation reactions between benzaldehydes and malononitrile with an active methylene group, where Zn-MOF was found to be a better catalyst than Co-MOF. This was supported by the Monte Carlo simulations indicating the better substrate binding ability of Zn-MOF than Co-MOF.

Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes

Grafting metal cations to missing linker defect sites in zirconium-based metal-organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen-deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1-3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Density functional theory calculations probing the Cossee-Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.

Fundamentals of chirality, resolution, and enantiopure molecule synthesis methods

The chirality of molecules is a concept that explains the interactions in nature. We may observe the same formula but different organizations revolving around the chiral center. Since Pasteur's meticulous observation of sodium ammonium tartrate crystals' structure, scientists have discovered many features of chiral molecules. The number of newly approved single enantiomeric drugs increases every year and takes place in the market. Thus, separation or resolution methods of racemic mixtures are of continued importance in the efficacy of drugs, installation of affordable production processes, and convenient synthetic chemistry practice. This article presents the asymmetric synthesis approaches and the classification of direct resolution methods of chiral molecules.

Synthesis of a Mixed-Ligand H-Bonded Cu Coordination Polymer: Exploring the pH-Dependent High Photocatalytic Degradation of Rhodamine 6G, Methyl Violet, Crystal Violet, and Rose Bengal Dyes under Room Illumination

A new mixed-ligand H-bonded coordination polymer {[Cu2(Or)2(Bimb)3]·4H2O} n (KA@CP-S) has been prepared hydrothermally using basic copper carbonate with 1,4-bis[(1H-imidazol-1-yl)methyl]benzene (Bimb) and potassium orotate (OrK) ligands. According to topological studies, KA@CP-S has a new topology with a three-connected uninodal net with point symbol (PS) {82·12}2{8}3. The KA@CP-S was employed as a catalyst for screening of a series of harmful cationic, anionic, and neutral organic dyes in contaminated water. The photocatalytic degradation study shows that it exhibits good catalytic efficiency for cationic dyes like Crystal Violet (CV, 75.8%), Methyl Violet (MV, 76.8%), and Rhodamine 6G (Rh6G, 86.5%) and Rose Bengal (RB, 76.1%), which is an anionic dye, while for a neutral dye, its catalytic efficiency is only 72% (Neutral Red) at ambient temperature. The effect of pH on photocatalytic degradation was also analyzed. The degradation experiment reveals that the detection limits of KA@CP-S for mostly catalyzed colorant concentrations in contaminated water are 0.60 ppm (CV), 0.20 ppm (RB), 0.33 ppm (MV), and 0.20 ppm (Rh6G) at pH 12, 4, and 10. The degradation of dyes follows pseudo-first-order kinetics. The excellent catalytic property and regeneration ability of KA@CP-S make it a potential and efficient future remedial material for the detection and separation of toxic dyes from wastewater contaminated by industrial effluents.

Fe-Based Metal-Organic Frameworks for the Controlled Release of Fertilizer Nutrients

Due to the controlled-delivery function of metal-organic frameworks (MOFs) for gases, drugs, and pesticides, iron-based MOFs (Fe-MOFs) were explored in the laboratory as a novel fertilizer, which showed potential for use in the fertilizer industry; the challenge in the industrial scale application of Fe-MOFs in practical crop production was mainly the impact of scaling-up to energy and heat transfer, as well as the reaction yield. In this study, Fe-MOFs were hydrothermally synthesized both in the laboratory scale and in the pilot scale, their structure and components were characterized using various spectroscopic techniques, and then their nutrient release and degradation behaviors were investigated. The results showed that Fe-MOFs were successfully synthesized in both scales with similar yields around 27%, and the Fe-MOFs showed a similar structure with the molecular formula of C₂H₁₅Fe₂N₂O₁₈P₃. The nutrients N, P, and Fe were present in the Fe-MOFs with the average contents of 6.03, 14.48, and 14.69%, respectively. Importantly, the nutrient release rate and pattern of Fe-MOFs well matched with the crop growth, which greatly promoted the rice yield. Therefore, the environmentally friendly compounds of Fe-MOFs could be industrially produced and used as an innovative fertilizer with unique features of varied nutrients and controlled release.

Synthesis of 3D Cadmium(II)-Carboxylate Framework Having Potential for Co-Catalyst Free CO2 Fixation to Cyclic Carbonates

Metal-organic frameworks (MOFs) are porous coordination polymers with interesting structural frameworks, properties, and a wide range of applications. A novel 3D cadmium(II)-carboxylate framework, CdMOF ([Cd2(L)(DMF)(H2O)2]n), was synthesized by the solvothermal method using a tetracarboxylic bridging linker having amide functional moieties. The CdMOF crystal structure exists in the form of a 3D layer structure. Based on the single-crystal X-ray diffraction studies, the supramolecular assembly of CdMOF is explored by Hirshfeld surface analysis. The voids and cavities analysis is performed to check the strength of the crystal packing in CdMOF. The CdMOF followed a multistage thermal degradation pattern in which the solvent molecules escaped around 200 °C and the structural framework remained stable till 230 °C. The main structural framework collapsed (>60 wt.%) into organic volatiles between 400–550 °C. The SEM morphology analyses revealed uniform wedge-shaped rectangular blocks with dimensions of 25–100 μm. The catalytic activity of CdMOF for the solvent and cocatalyst-free cycloaddition of CO2 into epichlorohydrin was successful with 100% selectivity. The current results revealed that this 3D CdMOF is more active than the previously reported CdMOFs and, more interestingly, without using a co-catalyst. The catalyst was easily recovered and reused, having the same performance.

Towards High CO2 Conversions Using Cu/Zn Catalysts Supported on Aluminum Fumarate Metal-Organic Framework for Methanol Synthesis

Green methanol is a viable alternative for the storage of hydrogen and may be produced from captured anthropogenic sources of carbon dioxide. The latter was hydrogenated over Cu-ZnO catalysts supported on an aluminum fumarate metal-organic framework (AlFum MOF). The catalysts, prepared via slurry phase impregnation, were assessed for thermocatalytic hydrogenation of CO2 to methanol. PXRD, FTIR, and SBET exhibited a decrease in crystallinity of the AlFum MOF support after impregnation with Cu-Zn active sites. SEM, SEM-EDS, and TEM revealed that the morphology of the support is preserved after metal loading, where H2-TPR confirmed the presence of active sites for hydrogen uptake. The catalysts exhibited good activity, with a doubling in Cu and Zn loading over the AlFum MOF, resulting in a 4-fold increase in CO2 conversions from 10.8% to 45.6% and an increase in methanol productivity from 34.4 to 56.5 gMeOH/Kgcat/h. The catalysts exhibited comparatively high CO selectivity and high yields of H2O, thereby favoring the reverse water-gas shift reaction. The selectivity of the catalysts towards methanol was found to be 12.9% and 6.9%. The performance of the catalyst supported on AlFum MOF further highlights the potential use of MOFs as supports in the heterogeneous thermocatalytic conversion of CO2 to value-added products.

Electron structure modulation and bicarbonate surrounding enhance Fenton-like reactions performance of Co-Co PBA

Although several strategies have been developed to improve the efficiency of heterogeneous Fenton-like reactions, investigating the relationship among the electronic properties of the catalyst surface, the complex water matrix and catalytic activity remains challenges. Herein, the electron density of the active site Co(II) in Co Prussian blue analogs (Co-PBAs) is proved to be modulated by the anion source method. The elevated electron density of Co(II) and the higher metallicity of the catalyst lead to an increase in electron transport efficiency as revealed by X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), and density functional theory (DFT) calculations. Furthermore, the negative shift of the D-band center of Co(II) can effectively release intermediates to avoid catalyst poisoning. Bicarbonate has been demonstrated to activate peroxymonosulfate (PMS) by weakening the peroxide bond. Its activation mechanism involves free radical mechanism and non-radical mechanism: the first step is the generation of HCO₄^-, then it is further hydrolyzed to generate •OH and ¹O₂, and the other is HCO₄^- interact with Co(III) to form Co(IV)=O. In addition, the degradation pathways of target contaminants p-nitrophenol and toxicity verification of intermediate products have been investigated. This study provides guidance for the research of Fenton-like reactions.

Biomimetic Assembly of Spore@ZIF-8 Microspheres for Vaccination

Vaccines have been one of the most powerful weapons to defend against infectious diseases for a long time now. Subunit vaccines are of increasing importance because of their safety and effectiveness. In this work, a Bacillus amyloliquefaciens spore@zeolitic imidazolate framework-8 (ZIF-8) vaccine platform is constructed. The ovalbumin (OVA) is encapsulated in the ZIF-8 shells as a model antigen to form a spore@OVA@ZIF-8 (SOZ) composite. The assembly of ZIF-8 improves the loading content of OVA on the spores and provides OVA with long-term protection. The SOZ composite enhances the immunization efficacy in multiple ways, such as facilitation of antigen uptake and lysosome escape, stimulation of dendritic cells to mature and secrete cytokines, boosting of antibody production and formation of an antigen depot. This platform shows several advantages including easy preparation, cost-effectiveness, long life, convenience of transportation and storage, and no need for the cold chain. These findings may have promising implications for the rational design of safe and effective spore-based composite vaccine platforms.