Light from Afield: Fast, High-Resolution, and Layer-Free Deep Vat 3D Printing

Harnessing light for cross-linking of photoresponsive materials has revolutionized the field of 3D printing. A wide variety of techniques leveraging broad-spectrum light shaping have been introduced as a way to achieve fast and high-resolution printing, with applications ranging from simple prototypes to biomimetic engineered tissues for regenerative medicine. Conventional light-based printing techniques use cross-linking of material in a layer-by-layer fashion to produce complex parts. Only recently, new techniques have emerged which deploy multidirection, tomographic, light-sheet or filamented light-based image projections deep into the volume of resin-filled vat for photoinitiation and cross-linking. These Deep Vat printing (DVP) approaches alleviate the need for layer-wise printing and enable unprecedented fabrication speeds (within a few seconds) with high resolution (>10 μm). Here, we elucidate the physics and chemistry of these processes, their commonalities and differences, as well as their emerging applications in biomedical and non-biomedical fields. Importantly, we highlight their limitations, and future scope of research that will improve the scalability and applicability of these DVP techniques in a wide variety of engineering and regenerative medicine applications.

With or without a co-solvent? highly efficient ultrafast phenanthrenequinone-electron rich alkene (PQ-ERA) photoclick reactions

The light-induced photocycloaddition of 9,10-phenanthrenequinone (PQ) with electron-rich alkenes (ERA), known as the PQ-ERA reaction, is a highly attractive photoclick reaction characterized by its operational simplicity and high biocompatibility. One essential aspect of photoclick reactions is their high rate, however the limited solubility of PQs often requires the use of a co-solvent. Evaluating the effect of different co-solvents on the PQ-ERA reaction and their influence on the reaction rate, we discovered that sulfur-containing compounds, in particular the frequently used solubilizing co-solvent DMSO, quench the triplet state of the PQ. These experimental results, supported by nanosecond-microsecond and ultrafast transient absorption data, show that even minimal amounts of DMSO result in a decreased lifetime of the reactive triplet state, essential for the photoclick reaction. Without DMSO as co-solvent, exceptionally high photoreaction quantum yields ( Φ P up to 93% with only 1 equivalent ERA) and complete conversion in seconds can be achieved. With these outstanding efficiencies, the PQ-ERA reaction can be used without excess ERA and at low light intensities, facilitating photoclick transformations in various future applications.

Art of Cross-Linking In Situ Bulk Perovskites for Efficient and Stable Photovoltaics

Perovskites are hybrid materials containing templating organic linkers and inorganic halides with efficiencies that have superseded the efficiency of silicon-based photovoltaic devices (PVs) in a very short period of 10 years. Nevertheless, low ambient stability due to traps and ion migration caused hysteresis to remain the bottlenecks on the way to achieving higher operational stability with bulk perovskite-based PVs. In this context, herein we highlight the prospects of in situ cross-linking of linkers within the perovskite lattice either mediated by thermal means or attained photochemically that can maneuver the ambient as well as operational stability for enhanced power conversion efficiency for PV applications or could improve the conductivity of this hybrid semiconductor. Additionally, some important studies of additive engineering via in situ cross-linking that can affect the structure of perovskite in addition to defect passivation to endow ambient environment stability are highlighted herein.

Exosomes encapsulated in hydrogels for effective central nervous system drug delivery

The targeted delivery of pharmacologically active molecules, metabolites, and growth factors to the brain parenchyma has become one of the major challenges following the onset of neurodegeneration and pathological conditions. The therapeutic effect of active biomolecules is significantly impaired after systemic administration in the central nervous system (CNS) because of the blood-brain barrier (BBB). Therefore, the development of novel therapeutic approaches capable of overcoming these limitations is under discussion. Exosomes (Exo) are nano-sized vesicles of endosomal origin that have a high distribution rate in biofluids. Recent advances have introduced Exo as naturally suitable bio-shuttles for the delivery of neurotrophic factors to the brain parenchyma. In recent years, many researchers have attempted to regulate the delivery of Exo to target sites while reducing their removal from circulation. The encapsulation of Exo in natural and synthetic hydrogels offers a valuable strategy to address the limitations of Exo, maintaining their integrity and controlling their release at a desired site. Herein, we highlight the current and novel approaches related to the application of hydrogels for the encapsulation of Exo in the field of CNS tissue engineering.

Protein click chemistry and its potential for medical applications

A revolution in chemical biology occurred with the introduction of click chemistry. Click chemistry plays an important role in protein chemistry modifications, providing specific, sensitive, rapid, and easy-to-handle methods. Under physiological conditions, click chemistry often overlaps with bioorthogonal chemistry, defined as reactions that occur rapidly and selectively without interfering with biological processes. Click chemistry is used for the posttranslational modification of proteins based on covalent bond formations. With the contribution of click reactions, selective modification of proteins would be developed, representing an alternative to other technologies in preparing new proteins or enzymes for studying specific protein functions in different biological processes. Click-modified proteins have potential in diverse applications such as imaging, labeling, sensing, drug design, and enzyme technology. Due to the promising role of proteins in disease diagnosis and therapy, this review aims to highlight the growing applications of click strategies in protein chemistry over the last two decades, with a special emphasis on medicinal applications.

Expedient Azide-Alkyne Huisgen Cycloaddition Catalyzed by a Combination of VOSO4 with Cu(0) in Aqueous Media

A series of vanadium(III), vanadyl(IV/V) species, inorganic metal oxides, and transition-metal oxides was examined as cocatalysts with Cu(0) powder for copper(I)-catalyzed azide-alkyne cycloaddition. Among them, vanadyl(IV) species bearing acetylacetonate, acetate, and sulfate, vanadyl(V) isopropoxide, and vanadate were suitable for the click reactions of per-acetyl and per-benzyl β-azido glycosides with three different terminal alkynes in CH3CN. Water-soluble vanadyl(IV) sulfate was further selected for efficient click reactions for unprotected β-glycosyl azides and even compatible with a thiol-containing substrate in aqueous media at ambient temperature.

Single-Crystal-to-Single-Crystal Photosynthesis of Supramolecular Organoboron Polymers with Dynamic Effects

The solid-state synthesis of single-crystalline organic polymers, having functional properties, remains an attractive and developing research area in polymer chemistry and materials science. However, light-triggered topochemical synthesis of crystalline polymers comprising an organoboron backbone has not yet been reported. Here, we describe an intriguing example of single-crystal-to-single-crystal (SCSC) rapid photosynthesis (occurs on a seconds-scale) of two structurally different linear organoboron polymers, driven by environmentally sustainable visible/sun light, obtained from the same monomer molecule. A newly designed Lewis acid-base type molecular B ← N organoboron adduct (consisting of an organoboron core and naphthylvinylpyridine ligands) crystallizes in two solid-state forms featuring the same chemical structure but different 3D structural topologies, namely, monomers 1 and 2. The solvate molecule-free crystals of 1 undergo topochemical photopolymerization via an unusual olefin-naphthyl ring [2 + 2] cyclization to yield the single crystalline [3]-ladderane polymer 1P growing along the B ← N linkages, accompanied by instantaneous and violent macroscopic mechanical motions or photosalient effects (such as bending-reshaping and jumping motions). In contrast, visible light-harvesting single crystals of 2 quantitatively polymerize to a B ← N bond-stabilized polymer 2P in a SCSC fashion owing to the rapid [2 + 2] cycloaddition reaction among olefin double bonds. Such olefin bonds in the crystals of 2 are suitably preorganized for photoreaction due to the presence of solvate molecules in the crystal packing. Single crystals of 2 also show photodynamic jumping motions - in response to visible light but in a relatively slower fashion than the crystals of 1. In addition to SCSC topochemical polymerization and dynamic motions, both monomer crystals and their single-crystalline polymers feature green emissive and short-lived room-temperature phosphorescence properties upon excitation with visible-light wavelength.

Click Chemistry in Lithium-Metal Batteries

Lithium-metal batteries (LMBs) are considered the "holy grail" of the next-generation energy storage systems, and solid-state electrolytes (SSEs) are a kind of critical component assembled in LMBs. However, as one of the most important branches of SSEs, polymer-based electrolytes (PEs) possess several native drawbacks including insufficient ionic conductivity and so on. Click chemistry is a simple, efficient, regioselective, and stereoselective synthesis method, which can be used not only for preparing PEs with outstanding physical and chemical performances, but also for optimizing the stability of solid electrolyte interphase (SEI) layer and elevate the cycling properties of LMBs effectively. Here it is primarily focused on evaluating the merits of click chemistry, summarizing its existing challenges and outlining its increasing role for the designing and fabrication of advanced PEs. The fundamental requirements for reconstructing artificial SEI layer through click chemistry are also summarized, with the aim to offer a thorough comprehension and provide a strategic guidance for exploring the potentials of click chemistry in the field of LMBs.

β-Galactosidase-Activated and Red Light-Induced RNA Modification Strategy for Prolonged NIR Fluorescence/PET Bimodality Imaging

Improving the retention of small-molecule-based therapeutic agents in tumors is crucial to achieve precise diagnosis and effective therapy of cancer. Herein, we propose a β-galactosidase (β-Gal)-activated and red light-induced RNA modification (GALIRM) strategy for prolonged tumor imaging. A β-Gal-activatable near-infrared (NIR) fluorescence (FL) and positron emission tomography (PET) bimodal probe 68Ga-NOTA-FCG consists of a triaaza triacetic acid chelator NOTA for 68Ga-labeling, a β-Gal-activated photosensitizer CyGal, and a singlet oxygen (1O2)-susceptible furan group for RNA modification. Studies have demonstrated that the probe emits an activated NIR FL signal upon cleavage by endogenous β-Gal overexpressed in the lysosomes, which is combined with the PET imaging signal of 68Ga allowing for highly sensitive imaging of ovarian cancer. Moreover, the capability of 68Ga-NOTA-FCG generating 1O2 under 690 nm illumination could be simultaneously unlocked, which can trigger the covalent cross-linking between furan and nucleotides of cytoplasmic RNAs. The formation of the probe-RNA conjugate can effectively prevent exocytosis and prolong retention of the probe in tumors. We thus believe that this GALIRM strategy may provide entirely new insights into long-term tumor imaging and efficient tumor treatment.

Synthesis and characterization of a new copper-based polyoxomolybdate and its catalytic activity for azide-alkyne cycloaddition reaction under UV light irradiation

A new organic-functionalized Cu-based Anderson-type polyoxomolybdate, namely (C7H15N4)2[Na(H2O)4]2[C6H12CuMo6N2O24]·2(H2O) (CuII-POM), was synthesized via a simple one-pot reaction and subsequently characterized using a range of analytical and spectral techniques. Structural investigation by single crystal X-ray diffraction analysis revealed that the polyanion component of the synthesized compound (i.e. [C6H12CuMo6N2O24]4-) possesses a δ-isomer Anderson-type structure, which is surrounded by four lattice water molecules and four [C7H15N4-NaH15(H2O)8]4+ cations in the crystal packing arrangement. The resulting double-sided tris-functionalized Anderson-type compound can function as highly effective heterogeneous photocatalysts for the copper(I)-catalyzed Huisgen azide-alkyne cycloaddition (Cu-AAC) reaction of terminal alkyne, benzyl halides, and sodium azide (acts as the azidonation and reducing agent) in aqueous media. Ultraviolet light irradiation enhances the catalytic activity of CuII-POM ~ 4.4 times of the "off" situation under reaction conditions of 0.00239 mmol cat., 80 °C, 8 h, 2 mL H2O, So that the isolated yields for the AAC reaction involving a variety of terminal alkynes and benzyl halides using the CuII-POM catalyst ranged between 19-97%. The current study is the first report about using an efficient and economical Cu(II)-POM/UV/NaN3 catalytic system in the Cu-AAC reaction and reveals its significant potential for applying to other Cu(I)-catalyzed reactions.

Characterization of the Reversible Intersystem Crossing Dynamics of Organic Photocatalysts Using Transient Absorption Spectroscopy and Time-Resolved Fluorescence Spectroscopy

Thermally activated delayed fluorescence (TADF) emitters are molecules of interest as homogeneous organic photocatalysts (OPCs) for photoredox chemistry. Here, three classes of OPC candidates are studied in dichloromethane (DCM) or N,N-dimethylformamide (DMF) solutions, using transient absorption spectroscopy and time-resolved fluorescence spectroscopy. These OPCs are benzophenones with either carbazole (2Cz-BP and 2tCz-BP) or phenoxazine/phenothiazine (2PXZ-BP and 2PTZ-BP) appended groups and the dicyanobenzene derivative 4DP-IPN. Dual lifetimes of the S1 state populations are observed, consistent with reverse intersystem crossing (RISC) and TADF emission. Example fluorescence lifetimes in DCM are (5.18 ± 0.01) ns and (6.22 ± 1.27) μs for 2Cz-BP, (1.38 ± 0.01) ns and (0.32 ± 0.01) μs for 2PXZ-BP, and (2.97 ± 0.01) ns and (62.0 ± 5.8) μs for 4DP-IPN. From ground state bleach recoveries and time-correlated single photon counting measurements, triplet quantum yields in DCM are estimated to be 0.62 ± 0.16, 0.04 ± 0.01, and 0.83 ± 0.02 for 2Cz-BP, 2PXZ-BP, and 4DP-IPN, respectively. 4DP-IPN displays similar photophysical behavior to the previously studied OPC 4Cz-IPN. Independent of the choice of solvent, 4DP-IPN, 2Cz-BP, and 2tCz-BP are shown to be TADF emitters, whereas emission by 2PXZ-BP and 2PTZ-BP depends on the molecular environment, with TADF emission enhanced in aggregates compared to monomers. Behavior of this type is representative of aggregation-induced emission luminogens (AIEgens).

Photocatalytic (3 + 2) dipolar cycloadditions of aziridines driven by visible-light

Herein, we document the design and development of a novel (3 + 2) cycloaddition reaction aided by the activity of an organic photocatalyst and visible light. The process is extremely fast, taking place in a few minutes, with virtually complete atom economy. A large variety of structurally diverse aziridines were used as masked ylides in the presence of different types of dipolarophiles (28 examples with up to 94% yield and >95 : 5 dr). Mechanistic insights obtained from photophysical, electrochemical and experimental studies highlight that the chemistry is driven by the in situ generation of the reactive ylide through two consecutive electron-transfer processes. We also report an aerobic cascade process, where an additional oxidation step grants access to a vast array of pyrrole derivatives (19 examples with up to 95% yield). Interestingly, the extended aromatic core exhibits a distinctive absorption and emission profile, which can be easily used to tag the effectiveness of this covalent linkage.

Photoswitchable and long-lived seven-membered cyclic singlet diradicals for the bioorthogonal photoclick reaction

Annularly 1,3-localized singlet diradicals are energetic and homolytic intermediates, but commonly too short-lived for widespread utilization. Herein, we describe a direct observation of a long-lived and seven-membered singlet diradical, oxepine-3,6-dione-2,7-diyl (OXPID), via spectroscopic experiments and also theoretical evidence from computational studies, which is generated via photo-induced ring-expansion of 2,3-diaryl-1,4-naphthoquinone epoxide (DNQO). The photo-generated OXPID reverts to the thermally stable σ-bonded DNQO with t1/2 in the μs level, thus constituting a novel class of T-type molecular photoswitches with high light-energy conversion efficiency (η = 7.8-33%). Meanwhile, the OXPID is equilibrated to a seven-membered cyclic 1,3-dipole as an electronic tautomer that can be captured by ring-strained dipolarophiles with an ultrafast cycloaddition rate (k2CA up to 109 M-1 s-1). The T-type photoswitchable DNQO is then exploited to be a highly selective and recyclable photoclick reagent, enabling spatiotemporal-resolved bioorthogonal ligation on living cell membranes via a tailored DNQO-Cy3 probe.

Digital image processing realized by memristor-based technologies

Today performance and operational efficiency of computer systems on digital image processing are exacerbated owing to the increased complexity of image processing. It is also difficult for image processors based on complementary metal-oxide-semiconductor (CMOS) transistors to continuously increase the integration density, causing by their underlying physical restriction and economic costs. However, such obstacles can be eliminated by non-volatile resistive memory technologies (known as memristors), arising from their compacted area, speed, power consumption high efficiency, and in-memory computing capability. This review begins with presenting the image processing methods based on pure algorithm and conventional CMOS-based digital image processing strategies. Subsequently, current issues faced by digital image processing and the strategies adopted for overcoming these issues, are discussed. The state-of-the-art memristor technologies and their challenges in digital image processing applications are also introduced, such as memristor-based image compression, memristor-based edge and line detections, and voice and image recognition using memristors. This review finally envisages the prospects for successful implementation of memristor devices in digital image processing.

Isostructural Nanocluster Manipulation Reveals Pivotal Role of One Surface Atom in Click Chemistry

Elucidating single-atom effects on the fundamental properties of nanoparticles is challenging because single-atom modifications are typically accompanied by appreciable changes to the overall particle's structure. Herein, we report the synthesis of a [Cu58 H20 PET36 (PPh3 )4 ]2+ (Cu58 ; PET: phenylethanethiolate; PPh3 : triphenylphosphine) nanocluster-an atomically precise nanoparticle-that can be transformed into the surface-defective analog [Cu57 H20 PET36 (PPh3 )4 ]+ (Cu57 ). Both nanoclusters are virtually identical, with five concentric metal shells, save for one missing surface copper atom in Cu57 . Remarkably, the loss of this single surface atom drastically alters the reactivity of the nanocluster. In contrast to Cu58 , Cu57 shows promising activity for click chemistry, particularly photoinduced [3+2] azide-alkyne cycloaddition (AAC), which is attributed to the active catalytic site in Cu57 after the removal of one surface copper atom. Our study not only presents a unique system for uncovering the effect of a single-surface atom modification on nanoparticle properties but also showcases single-atom surface modification as a powerful means for designing nanoparticle catalysts.

A review of materials used in tomographic volumetric additive manufacturing

Volumetric additive manufacturing is a novel fabrication method allowing rapid, freeform, layer-less 3D printing. Analogous to computer tomography (CT), the method projects dynamic light patterns into a rotating vat of photosensitive resin. These light patterns build up a three-dimensional energy dose within the photosensitive resin, solidifying the volume of the desired object within seconds. Departing from established sequential fabrication methods like stereolithography or digital light printing, volumetric additive manufacturing offers new opportunities for the materials that can be used for printing. These include viscous acrylates and elastomers, epoxies (and orthogonal epoxy-acrylate formulations with spatially controlled stiffness) formulations, tunable stiffness thiol-enes and shape memory foams, polymer derived ceramics, silica-nanocomposite based glass, and gelatin-based hydrogels for cell-laden biofabrication. Here we review these materials, highlight the challenges to adapt them to volumetric additive manufacturing, and discuss the perspectives they present.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at10.1557/s43579-023-00447-x.

Visible-Light-Induced Cationic Polymerization of Isobutylene: A Route toward the Synthesis of End-Functional Polyisobutylene

The visible-light-induced cationic polymerization of isobutylene with a dimanganese decacarbonyl (Mn2(CO)10)/diphenyl iodonium hexafluorophosphate (Ph2I+PF6-) photoinitiating system in a CH2Cl2/n-hexane mixture at -30 °C was reported. It was shown that polymerization is initiated by chloromethylisobutyl carbocations generated by the oxidation of chloromethylisobutyl radicals by Ph2I+PF6-. The latter are formed via chlorine abstraction from solvent (CH2Cl2) by MnCO5· radicals, which are generated by the photoinduced decomposition of Mn2(CO)10, followed by single isobutylene addition. This initiating system allowed us to synthesize valuable low molecular weight polyisobutylene with a relatively low polydispersity (Mn = 2000-3000 g mol-1; Đ < 1.7) and high content of exo-olefin end groups (up to 90%). The molecular weight of polyisobutylenes could be easily controlled in the range from 2000 to 12000 g mol-1 by changing the diphenyl iodonium salt concentration. Poly(β-pinene) with Mn = 5000 g mol-1 and Đ ∼ 2.0 was successfully synthesized using the same photoinitiating system.

Establishing PQ-ERA photoclick reactions with unprecedented efficiency by engineering of the nature of the phenanthraquinone triplet state

The light-induced photocycloaddition of 9,10-phenanthrenequinone (PQ) with electron-rich alkenes (ERA), known as the PQ-ERA reaction, is a highly attractive photoclick reaction characterized by high selectivity, external non-invasive control with light and biocompatibility. The conventionally used PQ compounds show limited reactivity, which hinders the overall efficiency of the PQ-ERA reaction. To address this issue, we present in this study a simple strategy to boost the reactivity of the PQ triplet state to further enhance the efficiency of the PQ-ERA reaction, enabled by thiophene substitution at the 3-position of the PQ scaffold. Our investigations show that this substitution pattern significantly increases the population of the reactive triplet state (³ππ*) during excitation of 3-thiophene PQs. This results in a superb photoreaction quantum yield (Φ_P, up to 98%), high second order rate constants (k₂, up to 1974 M^-1 s^-1), and notable oxygen tolerance for the PQ-ERA reaction system. These results have been supported by both experimental transient absorption data and theoretical calculations, providing further evidence for the effectiveness of this strategy, and offering fine prospects for fast and efficient photoclick transformations.

Photoswitchable Oxidopyrylium Ylide for Photoclick Reaction with High Spatiotemporal Precision: A Dynamic Switching Strategy to Compensate for Molecular Diffusion

We describe a novel type of photoclick reaction between 2,3-diaryl indenone epoxide (DIO) and ring-strained dipolarophiles, in which DIO serves as a P-type photoswitch to produce mesoionic oxidopyrylium ylide (PY) to initiate an ultra-fast [5+2] cycloaddition (k_2hν =1.9×10⁵  M^-1  s^-1 ). The photoisomerization between DIO and PY can be tightly controlled by either 365 or 520 nm photo-stimulation, which allows reversion or regeneration of the reactive PY dipole on demand. Thus, this reversible photoactivation was exploited to increase the chemoselectivity of the [5+2] cycloaddition in complex environments via temporal dual-λ stimulation sequences and to recycle the DIO reagent for batch-wise protein conjugation. A dynamic photoswitching strategy is also proposed to compensate for molecular diffusion of PY in aqueous solution, enhancing the spatial resolution of lithographic surface decoration and bioorthogonal labeling on living cells via a spatiotemporal dual-λ photo-modulation.

Selective Positioning of Different Cell Types on 3D Scaffolds via DNA Hybridization

Three-dimensional (3D) microscaffolds for cell biology have shown their potential in mimicking physiological environments and simulating complex multicellular constructs. However, controlling the localization of cells precisely on microfabricated structures is still complex and usually limited to two-dimensional assays. Indeed, the implementation of an efficient method to selectively target different cell types to specific regions of a 3D microscaffold would represent a decisive step toward cell-by-cell assembly of complex cellular arrangements. Here, we use two-photon lithography (2PL) to fabricate 3D microarchitectures with functional photoresists. UV-mediated click reactions are used to functionalize their surfaces with single-stranded DNA oligonucleotides, using sequential repetition to decorate different scaffold regions with individual DNA addresses. Various immortalized cell lines and stem cells modified by grafting complementary oligonucleotides onto the phospholipid membranes can then be immobilized onto complementary regions of the 3D structures by selective hybridization. This allows controlled cocultures to be established with spatially separated arrays of eukaryotic cells in 3D.

Exceptional Light Sensitivity by Thiol-Ene Click Lithography

Lithographic patterning, which utilizes the solubility switch of photoresists to convert optical signals into nanostructures on the substrate, is the primary top-down approach for nanoscale fabrication. However, the low light/electron-energy conversion efficiency severely limits the throughput of lithography. Thiol-ene reaction, as a photoinitiated radical addition reaction, is widely known as click reaction in the field of chemistry due to its extremely high efficiency. Here, we introduce a click lithography strategy utilizing the rapid thiol-ene click reaction to realize ultraefficient nanofabrication. This novel approach facilitated by the implementation of ultrahigh-functionality material designs enables high-contrast patterning of metal-containing nanoclusters under an extremely low deep-ultraviolet exposure dose, e.g., 7.5 mJ cm^-2, which is 10-20 times lower than the dose used in the photoacid generator-based photoresist system. Meanwhile, 45 nm dense patterns were also achieved at a low dose using electron beam lithography, revealing the great potential of this approach in high-resolution patterning. Our results demonstrated the high-sensitivity and high-resolution features of click lithography, providing inspiration for future lithography design.

Photoinduced Controlled/Living Polymerizations

The application of photochemistry in polymer synthesis is of interest due to the unique possibilities offered compared to thermochemistry, including topological and temporal control, rapid polymerization, sustainable low-energy processes, and environmentally benign features leading to established and emerging applications in adhesives, coatings, adaptive manufacturing, etc. In particular, the utilization of photochemistry in controlled/living polymerizations often offers the capability for precise control over the macromolecular structure and chain length in addition to the associated advantages of photochemistry. Herein, the latest developments in photocontrolled living radical and cationic polymerizations and their combinations for application in polymer syntheses are discussed. This Review summarizes and highlights recent studies in the emerging area of photoinduced controlled/living polymerizations. A discussion of mechanistic details highlights differences as well as parallels between different systems for different polymerization methods and monomer applicability.

A light-initiated chemical reporter strategy for spatiotemporal labeling of biomolecules

The emergence of optochemical approaches has had a diverse impact over a broad range of biological research due to spatiotemporal regulation. Herein, we integrate this feature into the bioorthogonal chemical reporter strategy, which enables visible light-controlled spatiotemporal labeling of cell-surface glycans, lipids, and proteins. The metabolic precursors were first incorporated into live cells, and next the bioorthogonal reaction converted the azide/alkyne into a photo-active functional group, which allowed for subsequent photo-click reaction. We demonstrated this strategy by specifically labeling sialome, mucin-type O-glycome, phospholipids and newly-synthesized membrane proteins, respectively. The sequential photoirradiation-orthogonal reporter tagging (SPORT) should facilitate the probing of biomolecules in complex biological systems with high spatiotemporal precision.

On-Surface Azide-Alkyne Cycloaddition Reaction: Does It Click with Ruthenium Catalysts?

Owing to its simplicity, selectivity, high yield, and the absence of byproducts, the "click" azide-alkyne reaction is widely used in many areas. The reaction is usually catalyzed by copper(I), which selectively produces the 1,4-disubstituted 1,2,3-triazole regioisomer. Ruthenium-based catalysts were later developed to selectively produce the opposite regioselectivity─the 1,5-disubstituted 1,2,3-triazole isomer. Ruthenium-based catalysis, however, remains only tested for click reactions in solution, and the suitability of ruthenium catalysts for surface-based click reactions remains unknown. Also unknown are the electrical properties of the 1,4- and 1,5-regioisomers, and to measure them, both isomers need to be assembled on the electrode surface. Here, we test whether ruthenium catalysts can be used to catalyze surface azide-alkyne reactions to produce 1,5-disubstituted 1,2,3-triazole, and compare their electrochemical properties, in terms of surface coverages and electron transfer kinetics, to those of the compound formed by copper catalysis, 1,4-disubstituted 1,2,3-triazole isomer. Results show that ruthenium(II) complexes catalyze the click reaction on surfaces yielding the 1,5-disubstituted isomer, but the rate of the reaction is remarkably slower than that of the copper-catalyzed reaction, and this is related to the size of the catalyst involved as an intermediate in the reaction. The electron transfer rate constant (ket) for the ruthenium-catalyzed reaction is 30% of that measured for the copper-catalyzed 1,4-isomer. The lower conductivity of the 1,5-isomer is confirmed by performing nonequilibrium Green's function computations on relevant model systems. These findings demonstrate the feasibility of ruthenium-based catalysis of surface click reactions and point toward an electrical method for detecting the isomers of click reactions.

Expanding the functionality of proteins with genetically encoded dibenzo[b,f][1,4,5]thiadiazepine: a photo-transducer for photo-click decoration

Genetic incorporation of novel noncanonical amino acids (ncAAs) that are specialized for the photo-click reaction allows the precisely orthogonal and site-specific functionalization of proteins in living cells under photo-control. However, the development of a r̲ing-strain i̲n situ l̲oadable d̲ipolarophile (RILD) as a genetically encodable reporter for photo-click bioconjugation with spatiotemporal controllability is quite rare. Herein, we report the design and synthesis of a photo-switchable d̲ib̲enzo[b,f][1,4,5]t̲hiad̲iazepine-based a̲lanine (DBTDA) ncAA, together with the directed evolution of a pyrrolysyl-tRNA synthetase/tRNA_CUA pair (PylRS/tRNA_CUA), to encode the DBTDA into recombinant proteins as a RILD in living E. coli cells. The fast-responsive photo-isomerization of the DBTDA residue can be utilized as a converter of photon energy into ring-strain energy to oscillate the conformational changes of the parent proteins. Due to the photo-activation of RILD, the photo-switching of the DBTDA residue on sfGFP and OmpC is capable of promoting the photo-click ligation with diarylsydnone (DASyd) derived probes with high efficiency and selectivity. We demonstrate that the genetic code expansion (GCE) with DBTDA benefits the studies on the distribution of decorated OmpC-DBTD on specific E. coli cells under a spatiotemporal resolved photo-stimulation. The GCE for encoding DBTDA enables further functional diversity of artificial proteins in living systems.

Lights on 2,5-diaryl tetrazoles: applications and limits of a versatile photoclick reaction

Recently, photoclick chemistry emerged as a powerful tool employed in several research fields, from medicinal chemistry and biology to material sciences. The growing interest in this type of chemical process is justified by the possibility to produce complex molecular systems using mild reaction conditions. However, the elevated spatio-temporal control offered by photoclick chemistry is highly intriguing, as it expands the range of applications. In this context, the light-triggered reaction of 2,5-diaryl tetrazoles with dipolarophiles emerged for its interesting features: excellent stability of the substrates, fast reaction kinetic, and the formation of a highly fluorescent product, fundamental for sensing applications. In the last years, 2,5-diaryl tetrazoles have been extensively employed, especially for bioorthogonal ligations, to label biomolecules and nucleic acids. In this review, we summarized recent applications of this interesting photoclick reaction, with a particular focus on biological fields. Moreover, we described the main limits that affect this system and current strategies proposed to overcome these issues. The general discussion here presented could prompt further optimization of the process and pave the way for the development of new original structures and innovative applications.

Graphical abstract

Catalytic Activation of Bioorthogonal Chemistry with Light (CABL) Enables Rapid, Spatiotemporally Controlled Labeling and No-Wash, Subcellular 3D-Patterning in Live Cells Using Long Wavelength Light

Described is the spatiotemporally controlled labeling and patterning of biomolecules in live cells through the catalytic activation of bioorthogonal chemistry with light, referred to as "CABL". Here, an unreactive dihydrotetrazine (DHTz) is photocatalytically oxidized in the intracellular environment by ambient O2 to produce a tetrazine that immediately reacts with a trans-cyclooctene (TCO) dienophile. 6-(2-Pyridyl)dihydrotetrazine-3-carboxamides were developed as stable, cell permeable DHTz reagents that upon oxidation produce the most reactive tetrazines ever used in live cells with Diels-Alder kinetics exceeding k2 of 106 M-1 s-1. CABL photocatalysts are based on fluorescein or silarhodamine dyes with activation at 470 or 660 nm. Strategies for limiting extracellular production of singlet oxygen are described that increase the cytocompatibility of photocatalysis. The HaloTag self-labeling platform was used to introduce DHTz tags to proteins localized in the nucleus, mitochondria, actin, or cytoplasm, and high-yielding subcellular activation and labeling with a TCO-fluorophore were demonstrated. CABL is light-dose dependent, and two-photon excitation promotes CABL at the suborganelle level to selectively pattern live cells under no-wash conditions. CABL was also applied to spatially resolved live-cell labeling of an endogenous protein target by using TIRF microscopy to selectively activate intracellular monoacylglycerol lipase tagged with DHTz-labeled small molecule covalent inhibitor. Beyond spatiotemporally controlled labeling, CABL also improves the efficiency of "ordinary" tetrazine ligations by rescuing the reactivity of commonly used 3-aryl-6-methyltetrazine reporters that become partially reduced to DHTzs inside cells. The spatiotemporal control and fast rates of photoactivation and labeling of CABL should enable a range of biomolecular labeling applications in living systems.

Controlling Properties and Functions of Polymer Gels Using Photochemical Reactions

Photoresponsive polymer gels have attracted increasing interest owing to their potential applications in healable materials, drug release systems, and extracellular matrices. Because polymer gels provide suitable environments for photochemical reactions, their properties and functions can be controlled with light with a high spatiotemporal resolution. Herein, the design of photoresponsive polymer gels based on different types of photochemical reactions is introduced. The mechanism and applications of irreversible photoreactions, such as photoinduced free-radical polymerization, photoinduced click reactions, and photolysis, as well as reversible photoreactions such as photoinduced reversible cycloadditions, reversible photosubstitution of metal complexes, and photoinduced metathesis are reviewed. The remaining challenges of photoresponsive polymer gels are also discussed.

Solution [2 + 2] photopolymerization of biomass-derived nonrigid biscinnamate monomers enabled by energy transfer catalysis

Visible light-mediated [2 + 2] photopolymerization of nonrigid biscinnamate monomers has been realized in solution via energy transfer catalysis, featuring its operation simplicity, controllability, and a general monomer scope.

Photobase-catalysed anionic thiol-epoxy click photopolymerization under NIR irradiation: from deep curing to shape memory

A photobase generator absorbing upconversion fluorescence can efficiently catalyze anionic thiol-epoxy click photopolymerization under 980 nm NIR light irradiation.

Pyrazine Based Type-I Sensitizing Assemblies for Photoreduction of Cu(II) in 'One-Pot Three-Component' CuAAC Reaction Under Aerial Conditions

Photosensitizing assemblies of pyrazine derivative PDA have been developed which exhibit a high photostability, 'lighted' excited state, balanced redox potential, high transportation potential and activate oxygen via type-I pathway only. These PDA assemblies in combination with Cu(II) ions catalyze the CuAAC reaction via in situ reduction of Cu(II) ions without any reducing or stabilizing agent. The present protocol has wide substrate scope with recyclability of the catalytic system up to six catalytic cycles and is applicable to gram-scale synthesis.