Nanostructure Engineering and Doping of Conjugated Carbon Nitride Semiconductors for Hydrogen Photosynthesis

Construction of the fluorescence sensing platform with a bifunctional Cu@MOF nanozyme for determination of alkaline phosphatase and its inhibitor

In this work, a novel and sensitive fluorescence sensing system for alkaline phosphatase (ALP) was constructed using a bifunctional copper metal-organic framework (Cu@MOF) nanozyme, which had excellent oxidase-mimetic activity and fluorescence properties. Owing to the presence of 2-amino-1,4-benzenedicarboxylic acid (1,4-BDC-NH2) ligand, Cu@MOF displays excellent fluorescence performance at 444 nm. Additionally, Cu2+ endows the oxidase-like activity of Cu@MOF, which could trigger p-phenylenediamine (PPD) to be oxidized to a brown product (PPDox) and quench the photoluminescence of Cu@MOF through the inner filtration effect (IFE). As the preferential affinity of ATP for Cu2+, the catalytic activity of Cu@MOF was significantly reduced once ATP was added, thus PPD could not be oxidized and fluorescence was recovered. In the presence of ALP, ATP was hydrolyzed to adenosine and Pi, which allowed Cu@MOF to regain its catalytic activity and continued to catalyze the generation of PPDox. The fluorescence of Cu@MOF was therefore weakened once again. The ALP activity was directly proportional to the degree of decrease in fluorescence intensity. Thus, this novel fluorescence sensing strategy had a linear range of 0.5-60 U/L and the limit of detection was 0.14 U/L. The established sensing method could also be used to for ALP inhibitors screening, and achieved satisfactory results in determining the level of ALP activity in human serum.

Thermal reflux to synthesise C3N4 nanostructures with high yield and enhanced photocatalytic activity in hydrogen evolution

Graphitic carbon nitride (g-C3N4) is an attractive photocatalyst and a thermal reflux method was used to significantly increase the yield of g-C3N4 nanostructures and enhance their photocatalytic activity for H2 production. When raw material was placed in an inclined quartz tube with the bottom in the high temperature zone and the top in the low temperature zone, the vapor of the raw material was condensed from the top and refluxed to the bottom to then participate in the reaction again. This method can significantly improve the yield of g-C3N4 with an increase of 28.2%. When used as the photocatalyst in water splitting, these g-C3N4 nanostructures exhibit excellent activity with an H2 production of 2102 μmol h-1 g-1 under visible irradiation, which is 43.2% higher than the sample prepared by a traditional thermal polymerization method. This method is also promising to use for the synthesis of similar two-dimensional nanostructures for effective H2 production.

Transforming Pharmaceutical Synthesis with Sein-E-B Nanocomposite Photocatalyst through 1,4-NAD(P)H Cofactor Regeneration and C-N Bond Activation

The need for sunlight chemical renewal and contemporary organic transformation has fostered the advancement of environmentally friendly photocatalytic techniques. For the first time, we report on the novel crafting of a bright future with selenium-infused Eosin-B (Sein-E-B) nanocomposite photocatalysts in this work. The Sein-E-B nanocomposite materials were created using a hydrothermal process for solar chemical regeneration and organic transformation under visible light. The synthesized samples were subjected to UV-DRS-visible spectroscopy, FT-IR, SEM, EDX, EIS and XRD analysis. The energy band gap of the Sein-E-B nanocomposite photocatalyst was measured using UV-DRS, and the result was around 2.06 eV. to investigate the generated Sein-E-B catalytic activity as a nanocomposite for 1,4-NADH/NADPH re-formation and C-N bond activation. This novel photocatalyst offers a promising alternative for the regeneration of solar chemicals and C-N bond creation between pyrrole and aryl halides.

Preparation and thermal responsiveness of microencapsulated fluorinated liquids for automatic fire extinguishing

Most early-stage fires originating in small confined spaces may not be effectively mitigated by automatic fire-extinguishing systems. Leveraging the unique controlled release capability and barrier properties of microcapsules presents a promising avenue for developing multifunctional and intelligent fire-extinguishing agents tailored for early-stage fire suppression. This paper introduces two types of microcapsules that integrate automatic detection and fire extinguishing functions, utilizing fluorinated liquids specifically perfluoro(2-methyl-3-pentanone) and 1,1,1,2,2,3,4,5,5,5 decafluoro-3-methoxy-4(trifluoromethyl)-pentane as core materials. The preparation process was optimized, and the thermal response of the microcapsules was evaluated by directly incorporating them into combustible materials. The results indicated a correlation between the preparation method, coating efficiency, and thermal stability of microcapsules with the core-wall materials. When the fluoride solution in the core material reaches the thermal response threshold temperature, the gas pressure generated during vaporization and phase change can break through the shell, enabling early active fire protection. Beyond a specific threshold of additive microcapsules in the material, the material exhibits self-extinguishing potential during combustion. In cases where the additive amount falls short of achieving self-extinguishing, the fire-resistant performance of materials can be enhanced through various measures. For instance, reducing the amount of fire-extinguishing agents, delaying the ignition time of fuel, and lowering the heat release rate during combustion are effective strategies. Moreover, the degree of improvement is related to the additional amount and the type of core-wall materials. The thermal-response mechanism of microcapsules constitutes a comprehensive mechanism with physical and chemical effects. The finding of this research offer a new technical approach for microencapsulating high-boiling-point gas extinguishing agents, facilitating intelligent and precise prevention of early fires resulting from combustible materials.

Enhancing the Photoluminescence and Electroluminescence of Graphitic Carbon Nitride via Atomic and Molecular Co-modification

Graphitic carbon nitride (g-CN) materials exhibit attractive optoelectronic physical properties; however, their low photoluminescence quantum yields (PLQYs) limit their applications in luminescent devices. Here, boron-doped aromatic carbon nitride (B-PhCNx) was synthesized for the first time via direct thermal polymerization of 2,4-diamino-6-phenyl-1,3,5-triazine and boric acid. The impact of B doping and phenyl modifying on the structural and optical characteristics of the samples was investigated in detail. The highest PLQY of 40.7% was achieved in B-PhCN20, which is 6.8 times that of pristine carbon nitride (p-CN). The B-PhCN20-based light-emitting diode demonstrates a maximum luminance of 1494 cd m-2 and a maximum external quantum efficiency of 1.03%, which are 3.5 and 4.9 times that of the p-CN-based device, respectively. Our findings will provide a reference for rationally designing low-cost and high-performance carbon-nitride-based optoelectronic devices.

Performance and mechanism investigation on the enhanced photocatalytic removal of atrazine on S-doped g-C3N4

Developing efficient method for removing low-concentration atrazine, a poisonous chlorinated triazine herbicide with poor biodegradability, was an important measure to control its risk. In this work, highly efficient photocatalytic oxidation of atrazine was achieved on S-doped g-C3N4 (S-g-C3N4). Approximate 99.6% of atrazine was removed in 2 h with a reaction rate constant of 2.76 h-1, nearly 2.44 times that on g-C3N4. The mechanism investigation indicated the improved photocatalytic performance of S-g-C3N4 could be attributed to the enlarged specific surface area, extended light absorption as well as the accelerated separation of the photogenerated charge carriers, which was brought about by the successful doping of sulfur in g-C3N4. Meanwhile, the influence of sulfur doping on the generation and contribution of different reactive species in atrazine removal were also elucidated. It revealed that compared with g-C3N4, the more positive valence band potential of S-g-C3N4 was beneficial to produce more singlet oxygen, which could react synergistically with the superoxide radicals, leading to the improved atrazine removal efficiency. The S-g-C3N4 based photocatalytic system also showed preferential photocatalytic oxidation capability in removing other triazine pesticides compared with 3-chlorophenol (3-CP). The potential applicability of the S-g-C3N4 based photocatalytic system in removing atrazine in high salty water was also investigated, which exhibited superior anti-interference ability towards virous coexistent ions. This work will provide essential and fundamental information for establishing efficient photocatalytic system for triazine type pollutants in waters.

Fenpicoxamid-Imprinted Surface Plasmon Resonance (SPR) Sensor Based on Sulfur-Doped Graphitic Carbon Nitride and Its Application to Rice Samples

This research attempt involved the development and utilization of a newly designed surface plasmon resonance (SPR) sensor which incorporated sulfur-doped graphitic carbon nitride (S-g-C3N4) as the molecular imprinting material. The primary objective was to employ this sensor for the quantitative analysis of Fenpicoxamid (FEN) in rice samples. The synthesis of S-g-C3N4 with excellent purity was achieved using the thermal poly-condensation approach, which adheres to the principles of green chemistry. Afterwards, UV polymerization was utilized to fabricate a surface plasmon resonance (SPR) chip imprinted with FEN, employing S-g-C3N4 as the substrate material. This process involved the inclusion of N,N'-azobisisobutyronitrile (AIBN) as the initiator, ethylene glycol dimethacrylate (EGDMA) as the cross-linker, methacryloylamidoglutamic acid (MAGA) as the monomer, and FEN as the analyte. After successful structural analysis investigations on a surface plasmon resonance (SPR) chip utilizing S-g-C3N4, which was imprinted with FEN, a comprehensive investigation was conducted using spectroscopic, microscopic, and electrochemical techniques. Subsequently, the kinetic analysis applications, namely the determination of the limit of quantification (LOQ) and the limit of detection (LOD), were carried out. For analytical results, the linearity of the FEN-imprinted SPR chip based on S-g-C3N4 was determined as 1.0-10.0 ng L-1 FEN, and LOQ and LOD values were obtained as 1.0 ng L-1 and 0.30 ng L-1, respectively. Finally, the prepared SPR sensor's high selectivity, repeatability, reproducibility, and stability will ensure safe food consumption worldwide.

Polymeric Carbon Nitride with Chirality Inherited from Supramolecular Assemblies

The facile synthesis of chiral materials is of paramount importance for various applications. Supramolecular preorganization of monomers for thermal polymerization has been proven as an effective tool to synthesize carbon and carbon nitride-based (CN) materials with ordered morphology and controlled properties. However, the transfer of an intrinsic chemical property, such as chirality from supramolecular assemblies to the final material after thermal condensation, was not shown. Here, we report the large-scale synthesis of chiral CN materials capable of enantioselective recognition. To achieve this, we designed supramolecular assemblies with a chiral center that remains intact at elevated temperatures. The optimized chiral CN demonstrates an enantiomeric preference of ca. 14 %; CN electrodes were also prepared and show stereoselective interactions with enantiomeric probes in electrochemical measurements. By adding chirality to the properties transferrable from monomers to the final product of a thermal polymerization, this study confirms the potential of using supramolecular precursors to produce carbon and CN materials and electrodes with designed chemical properties.

Enhanced photocatalytic degradation of levofloxacin over heterostructured C3N4/Nb2O5 system under visible light

The growing usage of antibiotics and their subsequent release in water bodies have become a serious environmental concern. In this study, heterostructured photocatalysts C3N4/Nb2O5 have been synthesized using a simple hydrothermal method and applied to facilitate the degradation of the widely used antibiotic levofloxacin. The structural, morphological, and optical properties of the photocatalysts were characterized using XRD, SEM, TEM, UV-Vis and PL to establish the structure-property relationship. The type-II heterojunctions C3N4/Nb2O5 show remarkable activity under visible light irradiation, where Nb2O5 facilitates preferential adsorption of levofloxacin at the catalyst surface while C3N4 extends visible light absorption. This synergy resulted in superior catalytic performance (91%) in the optimized system, exceeding that of individual materials (Nb2O5 30% and C3N4 56%). The effect of catalyst dosage, pH, oxygen and point of zero is also investigated. The process is mainly photo-driven, and the trapping experiments reveal superoxide radicals as key species responsible for the degradation. Additionally, the adsorption behaviour, reformation of the degraded pollutant and reusability factors are evaluated to assess the practical feasibility of the photocatalytic system.

Potassium-doped g-C3N4 enables efficient visible-light-driven dye degradation

Element doping is recognized as an efficient method to boost the photocatalytic performance of photocatalysts. Here, a new potassium ion-doped precursor, potassium sorbate, was employed in melamine configuration during calcination process to prepare the potassium-doped g-C3N4 (KCN). By various characterization techniques and electrochemical measurements, the doping of K in g-C3N4 can efficiently modify the band structure to enhance the light absorption and greatly increase the conductivity to accelerate charge transfer and photogenerated carrier separation, ultimately achieving an excellent photodegradation of the organic pollutant (methylene blue, MB). These results have demonstrated that the approach of potassium incorporation in g-C3N4 has potential in fabricating high-performance photocatalysts for organic pollutant removal.

Design and application of g-C3N4-based materials for fuels photosynthesis from CO2 or H2O based on reaction pathway insights

Photocatalytic CO2 reduction reaction (CRR) and hydrogen evolution reaction (HER) based on graphitic carbon nitride (g-C3N4) that is regarded as the metal-free "holy grail" photocatalyst, provide promising strategies for producing next-generation fuels, contributing to achieving carbon neutrality, alleviating energy and environment crisis. However, the activity of CRR and HER over g-C3N4 leaves much to be desired. Therefore, numerous studies have sprung up to enhance photoactivity. A comprehensive understanding of the CRR and HER reaction pathways is crucial for designing g-C3N4-based materials, further promoting efficient fuel production. Different from previous reviews that focus on g-C3N4 modification from the viewpoint of material science. In this review, we divided the multistep processes of CRR and HER into five reaction pathways and summarized the latest advances for improving each pathway of fuels synthesis through CRR or HER. Meanwhile, the existing bottleneck issues of each step were also discussed. Finally, comprehensive conclusions, including the remaining challenges, outlooks, etc., for CRR and HER over g-C3N4 were put forward. We are sure that this review will conduce to the understanding of the structure-activity relationship between CRR, HER processes, and g-C3N4 structure, which can provide the reference for developing high-powered photocatalysts, not confined to g-C3N4.

Molecular assembly of carbon nitride-based composite membranes for photocatalytic sterilization and wound healing

A multifactorial mechanism for successful dissolution of polymeric carbon nitrides (pCN) was disclosed, enabling pCN to compound more advanced nanocomposites at the molecular level, beyond the traditional solar fuel applications in powders.

Bifunctional g-C3N4/carbon nanotubes/WO3 ternary nanohybrids for photocatalytic energy and environmental applications

Ternary nanohybrids based on mesoporous graphitic carbon nitride (g-C3N4) were synthesized and presented for developing stable and efficient Hydrogen (H2) production system. Based on photocatalytic activity, optimization was performed in three different stages to develop carbon nanotubes (CNTs) and WO3 loaded g-C3N4 (CWG-3). Initially, the effect of exfoliation was investigated, and a maximum specific surface area of 100.77 m2/g was achieved. 2D-2D interface between WO3 and g-C3N4 was targeted and achieved, to construct a highly efficient direct Z-scheme heterojunction. Optimized binary composite holds the enhanced activity of about 2.6 folds of H2 generation rates than the thermally exfoliated g-C3N4. Further, CNT loading towards binary composite in an optimized weight ratio enhances the activity by 6.86 folds than the pristine g-C3N4. Notably, optimized ternary nanohybrid generates 15,918 μmol h-1. g-1cat of molecular H2, under natural solar light irradiation with 5 vol% TEOA as a sacrificial agent. Constructive enhancements deliver remarkable H2 production and dye degradation activities. Results evident that, the same system can be useful for pilot-scale energy generation and other photocatalytic applications as well.

Induced abundant oxygen vacancies in Sc2VO5-δ /g-C3N4 heterojunctions for enhanced photocatalytic degradation of levofloxacin

Sc₂VO_5-δ /g-C₃N₄ heterojunctions (SVCs) with abundant oxygen vacancies (OVs) were synthesized by ultrasonic exfoliation combined with the thermal etching method. The structures, OVs and spatial separation of the photogenerated carriers were systematically characterized. The results manifested that the SVCs were successfully constructed via the strong interaction between g-C₃N₄ (CN) and Sc₂VO_5-δ (SV). The SVCs possessed a higher concentration of OVs than that of pristine CN and SV. The formation of the SVC heterostructures and the optimization of the OVs were the two major factors to accelerate the separation of the charge carriers and finally to improve the photocatalysis performance. The as-prepared 10%SVC (containing 10 wt% of SV) catalyst exhibited the highest OV concentration and the best photocatalytic performance. The levofloxacin (LVX) photodegradation activity showed a positive correlation with the OV concentration. The photocatalytic degradation efficiencies were 89.1, 98.8 and 99.0% on 10%SVC for LVX, methylene blue (MB) and rhodamine B (RhB), respectively. These photodegradation processes followed the pseudo first order kinetic equation. The apparent rate constant (k _app) of LVX degradation on 10%SVC was 11.0 and 7.5 times that of CN and SV. The h⁺, ˙OH and ˙O₂ ^- were the major reactive species in the photodegradation process.

Schiff Base Complexes with Covalently Anchored Luminophores: Self-Enhanced Electrochemiluminescence Detection of Neomycin

A novel electrochemiluminescence (ECL) amplification strategy was established aiming to overcome the inherent shortcomings of the current oxygen (O₂) coreactant ECL systems. Macrocyclic Schiff base Fe complexes were rationally designed as a novel integrated ECL emitter by iminium linkage between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and 1,10-phenanthroline-2,9-dicarbaldehyde (PDL) and postmetalation of the macrocyclic Schiff base. Covalently combining luminophore ABEI with a catalytic center endowed the novel ECL emitter with both remarkable redox electrocatalytic properties and significantly enhanced ECL efficiency. The high content of ferrous iron and the dominantly active low-spin Fe state greatly contributed to the inherent catalytic activity for O₂ activation. The rational modification of luminophore optimized the spatial distribution and simultaneously shortened the species transport distance of coreactant radicals generated in situ from dissolved O₂, resulting in significantly self-enhanced ECL efficiency. Neomycin, which posed a growing threat to aquatic biodiversity and environmental safety, as the model antibiotic was successfully detected with a detection limit of 0.21 pM (S/N = 3), clarifying a promising application prospect of this new luminophore-embedded ECL amplification strategy in biological analysis and environmental monitoring.

WSe2/g-C3N4 for an In Situ Photocatalytic Fenton-like System in Phenol Degradation

An in situ photo-Fenton system can continuously generate H₂O₂ by photocatalysis, activating H₂O₂ in situ to form strong oxidizing ·OH radicals and degrading organic pollutants. A WSe₂/g-C₃N₄ composite catalyst with WSe₂ as a co-catalyst was successfully synthesized in this work and used for in situ photo-Fenton oxidation. The WSe₂/g-C₃N₄ composite with 7% loading of WSe₂ (CNW2) has H₂O₂ production of 35.04 μmol/L, which is fourteen times higher than pure g-C₃N₄. The degradation efficiency of CNW2 for phenol reached 67%. By constructing an in situ Fenton-system, the phenol degradation rate could be further enhanced to 90%. WSe₂ can enhance the catalytic activity of CNW2 by increasing electron mobility and inhibiting the recombination of photogenerated electron-hole pairs. Moreover, the addition of Fe²⁺ activates the generated H₂O₂, thus increasing the amount of strong oxidative ·OH radicals for the degradation of phenol. Overall, CNW2 is a promising novel material with a high H₂O₂ yield and can directly degrade organic pollutants using an in situ photo-Fenton reaction.

Metallic nanoparticles for catalytic reduction of toxic hexavalent chromium from aqueous medium: A state-of-the-art review

The ever increasing concentration of toxic and carcinogenic hexavalent chromium (Cr (VI)) in various environmental mediums including water-bodies due to anthropogenic activities with rapid civilization and industrialization have become the major issue throughout the globe during last few decades. Therefore, developing new strategies for the treatment of Cr(VI) contaminated wastewaters are in great demand and have become a topical issue in academia and industry. To date, various techniques have been used for the remediation of Cr(VI) contaminated wastewaters including solvent extraction, adsorption, catalytic reduction, membrane filtration, biological treatment, coagulation, ion exchange and photo-catalytic reduction. Among these methods, the transformation of highly toxic Cr(VI) to benign Cr(III) catalyzed by metallic nanoparticles (M-NPs) with reductant has gained increasing attention in the past few years, and is considered to be an effective approach due to the superior catalytic performance of M-NPs. Thus, it is a timely topic to review this emerging technique for Cr(VI) reduction. Herein, recent development in synthesis of M-NPs based non-supported, supported, mono-, bi- and ternary M-NPs catalysts, their characterization and performance for the reduction of Cr(VI) to Cr(III) are reviewed. The role of supporting host to stabilize the M-NPs and leading to enhance the reduction of Cr(VI) are discussed. The Cr(VI) reduction mechanism, kinetics, and factors affecting the kinetics are overviewed to collect the wealthy kinetics data. Finally, the challenges and perspective in Cr(VI) reduction catalyzed by M-NPs are proposed. We believe that this review will assist the researchers who are working to develop novel M-NPs catalysts for the reduction of Cr(VI).

Recent advances in visible-light graphitic carbon nitride (g-C3N4) photocatalysts for chemical transformations

Graphitic carbon nitride (g-C3N4) has emerged as a new research hotspot, attracting broad interdisciplinary attention in the form of metal-free and visible-light-responsive photocatalysts in the field of solar energy conversion and environmental remediation. These photocatalysts have evolved as attractive candidates due to their non-toxicity, chemical stability, efficient light absorption capacity in the visible and near-infrared regions, and adaptability as a platform for the fabrication of hybrid materials. This review mainly describes the latest advances in g-C3N4 photocatalysts for chemical transformations. In addition, the typical applications of g-C3N4-based photocatalysts involving organic transformation reactions are discussed (synthesis of heterocycles, hydrosulfonylation, hydration, oxygenation, arylation, coupling reactions, etc.).

Photocatalytic hydrogen evolution based on carbon nitride and organic semiconductors

Photocatalytic hydrogen evolution (PHE) presents a promising way to solve the global energy crisis. Metal-free carbon nitride (CN) and organic semiconductors photocatalysts have drawn intense interests due to their fascinating properties such as tunable molecular structure, electronic states, strong visible-light absorption, low-cost etc. In this paper, the recent progresses of photocatalytic hydrogen production based on organic photocatalysts, including CN, linear polymers, conjugated porous polymers and small molecules, are reviewed, with emphasis on the various strategies to improve PHE efficiency. Finally, the possible future research trends in the organic photocatalysts are prospected.

Polymeric carbon nitride-based materials: Rising stars in bioimaging

Polymeric carbon nitrides (CN), due to their unique physicochemical properties, versatile surface functionalization, ultra-high surface area, and good biocompatibility, have attracted considerable interest in diverse biomedical applications, such as biosensors, drug delivery, bioimaging, and theranostics. In this review, the recent advances in bioimaging of CN-based nanomaterials are summarized according to the imaging modalities, including optical (fluorescence and Raman) imaging, magnetic resonance imaging (MRI), photoacoustic imaging (PAI), computed tomography (CT), and multimodal imaging. The pros and cons of CN bioimaging are comprehensively analyzed and compared with those in previous reports. In the end, the prospects and challenges of their future bioimaging applications are outlooked.

Semiconducting Polymers for Oxygen Evolution Reaction under Light Illumination

Sunlight-driven water splitting to produce hydrogen fuel has stimulated intensive scientific interest, as this technology has the potential to revolutionize fossil fuel-based energy systems in modern society. The oxygen evolution reaction (OER) determines the performance of overall water splitting owing to its sluggish kinetics with multielectron transfer processing. Polymeric photocatalysts have recently been developed for the OER, and substantial progress has been realized in this emerging research field. In this Review, the focus is on the photocatalytic technologies and materials of polymeric photocatalysts for the OER. Two practical systems, namely, particle suspension systems and film-based photoelectrochemical systems, form two main sections. The concept is reviewed in terms of thermodynamics and kinetics, and polymeric photocatalysts are discussed based on three key characteristics, namely, light absorption, charge separation and transfer, and surface oxidation reactions. A satisfactory OER performance by polymeric photocatalysts will eventually offer a platform to achieve overall water splitting and other advanced applications in a cost-effective, sustainable, and renewable manner using solar energy.

Construction of double-functionalized g-C3N4 heterojunction structure via optimized charge transfer for the synergistically enhanced photocatalytic degradation of sulfonamides and H2O2 production

Herein, supporting g-C₃N₄ embedded with benzene-ring (BCN) on P-modified g-C₃N₄ (PCN) successfully synthesized the homogeneous photocatalyst BCN/PCN (PBCN) via a simple thermal polymerization reaction. Under blue-light (LED) irradiation, the optimized PBCN (0.448 min^-1) demonstrated excellent photocatalytic performance, attaining over 74 times the degradation rate for sulfisoxazole (SSZ) in contrast to non-functionalized g-C₃N₄ (CN, 0.006 min^-1). Theoretical calculations revealed that the substitution of heterocyclic rings in the g-C₃N₄ triazine networks with benzene-rings enabled them to serve as electron donors, while promoting photoinduced spatial charge dissociation. Further, the carrier PCN tended to serve as electron acceptors to form electron-rich corner-phosphorous sites. Reactive species experiments demonstrate that the O₂˙^- and h⁺ constituted the primary photocatalytic mechanism of SSZ degradation. The potential SSZ degradation routes were predicted based on the transformation products via mass spectrometry. Finally, the composite materials also exhibited excellent photocatalytic activity in the conversion of solar energy to chemical energy (H₂O₂). This study guides the rational modification of g-C₃N₄-based semiconductors to achieve green energy production and beneficial ecological applications.

Nanostructure Engineering of Graphitic Carbon Nitride for Electrochemical Applications

Graphitic carbon nitride with ordered two-dimensional structure displays multiple properties, including tunable structure, suitable bandgap, high stability, and facile synthesis. Many achievements on this material have been made in photocatalysis, but the advantages have not yet been fully explored in electrochemical fields. The bulk structure with low conductivity impedes charge-transfer kinetics during electrochemical processes. Excessive nitrogen content leads to insufficient charge transfer, while bulk structures produce tortuous channels for mass transport. Some attempts have been made to address these issues by nanostructure engineering, such as ultrathin structure design, heterogeneous composition, defect engineering, and morphology control. These structure-engineered nanomaterials have been successfully applied in electrochemical fields, including ionic actuators, flexible supercapacitors, lithium-ion batteries, and electrochemical sensors. Herein, a timely review on the latest advances in graphitic carbon nitride through various engineering strategies for electrochemical applications has been summarized. A perspective on critical challenges and future research directions is highlighted for graphitic carbon nitride in electrochemistry on the basis of existing research works and our experimental experience.

Phosphorus- and fluorine-co-doped carbon nitride: modulated visible light absorption, charge carrier kinetics and boosted photocatalytic hydrogen evolution

A phosphorus and fluorine co-doped carbon nitride (PF-CN) photocatalyst was synthesized to modulate the band gap structure, visible light response ability and photocatalytic H₂ evolution activity. Experimental results demonstrated that the electronic structure of g-C₃N₄ was regulated by phosphorus replacing the C site and fluorine substituting the N site in the g-C₃N₄ framework to form P-N species and C-F bonds, respectively. P- and F-co-doped carbon nitride gave rise to a more negative conduction band potential, larger surface area, efficient separation of photogenerated charge carriers and a faster charge transfer rate, contributing to an enhancement of photocatalytic H₂ production activity. PF-CN achieved an optimal H₂ evolution activity of 1690.56 μmol g^-1 which was 17.83 times higher with respect to that of pristine g-C₃N₄ (94.81 μmol g^-1). Meanwhile, PF-CN achieved the highest apparent quantum efficiency of 3.76% at 435 nm.

Differences and Similarities of Photocatalysis and Electrocatalysis in Two-Dimensional Nanomaterials: Strategies, Traps, Applications and Challenges

Photocatalysis and electrocatalysis have been essential parts of electrochemical processes for over half a century. Recent progress in the controllable synthesis of 2D nanomaterials has exhibited enhanced catalytic performance compared to bulk materials. This has led to significant interest in the exploitation of 2D nanomaterials for catalysis. There have been a variety of excellent reviews on 2D nanomaterials for catalysis, but related issues of differences and similarities between photocatalysis and electrocatalysis in 2D nanomaterials are still vacant. Here, we provide a comprehensive overview on the differences and similarities of photocatalysis and electrocatalysis in the latest 2D nanomaterials. Strategies and traps for performance enhancement of 2D nanocatalysts are highlighted, which point out the differences and similarities of series issues for photocatalysis and electrocatalysis. In addition, 2D nanocatalysts and their catalytic applications are discussed. Finally, opportunities, challenges and development directions for 2D nanocatalysts are described. The intention of this review is to inspire and direct interest in this research realm for the creation of future 2D nanomaterials for photocatalysis and electrocatalysis.

Ligand-Metal Charge Transfer Induced via Adjustment of Textural Properties Controls the Performance of Single-Atom Catalysts during Photocatalytic Degradation

Because of their peculiar nitrogen-rich structure, carbon nitrides are convenient polydentate ligands for designing single atom-dispersed photocatalysts. However, the relation between catalysts' textural properties and their photophysical-photocatalytic properties is rarely elaborated. Herein, we report the preparation and characterization of a series of single-atom heterogeneous catalysts featuring highly dispersed Ag and Cu species on mesoporous graphitic C₃N₄. We show that adjustment of materials textural properties and therefore metal single-atom coordination mode enables ligand-to-metal charge transfer (LMCT) or ligand-to-metal-to-ligand charge transfer (LMLCT), properties that were long speculated in single-atom catalysis but never observed. We employ the developed materials in the degradation of organic pollutants under irradiation with visible light. Kinetic investigations under flow conditions show that single atoms of Ag and Cu decrease the number of toxic organic fragmentation products while leading to a higher selectivity toward full degradation. The results correlate with the selected mode of charge transfer in the designed photocatalysts and provide a new understanding of how the local environment of a single-atom catalyst affects the surface structure and reactivity. The concepts can be exploited further to rationally design and optimize other single-atom materials.

Tune the Fluorescence and Electrochemiluminescence of Graphitic Carbon Nitride Nanosheets by Controlling the Defect States

The effects of defect states on the fluorescence (FL) and electrochemiluminescence (ECL) properties of graphite phase carbon nitride (g-CN) are systematically investigated for the first time. The g-CN nanosheets (CNNSs) obtained at different condensation temperatures are used as the study models. It can be found that all the CNNSs have two kinds of defect states, one is originated from the edge of CNNSs (labeled as CN-defect) and the other is attributed to the partially carbonization regions (labeled as C-defect). Both two kinds of defect states substantially affect the luminescent properties of CNNSs. Both the FL and ECL signals of CNNSs contain a band gap emission and two defect emissions. For the FL of CNNSs, decreasing the density of defect states can increase efficiently the FL quantum yield, while increasing the density of defect states can make the FL spectra red shift. For the ECL of CNNSs, increasing the density of CN-defect states and decreasing the density of C-defect states are greatly important to improve the ECL activity. This work provides a deep insight into the FL and ECL mechanisms of g-CN, and is of significance in tuning the FL and ECL properties of g-CN. Also, it will greatly promote the applications of CNNSs based on the FL and ECL properties.

Superior sponge-like carbon self-doping graphitic carbon nitride nanosheets derived from supramolecular pre-assembly of a melamine-cyanuric acid complex for photocatalytic H2 evolution

The photocatalytic evolution of hydrogen (H₂) from water splitting is considered a promising route to overcome the energy crisis, and the key lies in the preparation of efficient photocatalysts. Herein, superior ordered sponge-like carbon self-doped graphitic carbon nitride (g-C₃N₄) nanosheets (SCCNS) were prepared via a combined strategy of melamine-cyanuric acid complex supramolecular pre-assembly and solvothermal pre-treatment using ethylene glycol (EG) aqueous solutions (EG:water = 50:50 vol.%) as a solvent and carbon doping source. The following pyrolysis converts the naturally arranged melamine-EG-cyanuric acid supramolecular intermediates to highly crystalline SCCNS with large specific surface areas. The optimal SCCNS-180 exhibits superior photocatalytic H₂ evolution activities (∼4393 and 11 320 μmol h^-1 g^-1) when irradiated with visible light and simulated sunlight; these values are up to ∼17- and ∼18-fold higher than that of bulk g-C₃N₄. The quantum efficiency of SCCNS-180 at λ = 420 nm can reach 6.0%. The excellent photocatalytic performance of SCCNS-180 derives from its distinct ordered sponge-like nanosheet structure with highly crystallinity and the carbon doping, leading to its improved optical absorption, accelerated photoinduced electron-hole pair transfer and separation rate and enlarged specific surface area (134.4 m² g^-1).

Improved photocatalyst: Elimination of triazine herbicides by novel phosphorus and boron co-doping graphite carbon nitride

A non-metallic and low-cost novel phosphorus and boron co-doping graphite carbon nitride (PB-g-C₃N₄) photocatalyst was prepared by a facile thermal copolymerization of urea with B₂O₃ and (NH₄)₂·HPO₄. The novel PB-g-C₃N₄ exhibited excellent optical and electrical properties and the photocatalytic elimination efficiency for atrazine (AT, can make feminization of male frogs in the wild, and even induce reproductive cancers in humans.) has been greatly improved compared with the pristine g-C₃N₄. The results of characterization techniques indicate that the introduced B and P atoms most probably to substitute for sp²-hybridized C atoms in triazine rings. O₂^- and h⁺ are the dominant active species to induce the elimination of AT demonstrated by the radical-trapping experiments. And a possible elimination pathway is proposed according to the detected main intermediates. In addition, PB-g-C₃N₄ was applied to the simultaneous photocatalytic elimination of 9 triazine herbicides, and the effects of different initial concentrations, pH, fulvic acid (FA) and ion species on their elimination effects were studied. And it was proved that the photocatalytic performance of PB-g-C₃N₄ did not significant decrease after 4 times of reuse.

DMAP molecule grafting on a carbon nitride heptazine ring for the better degradation of pollutants – the synergy of electron withdrawing and steric hindrance effects

Graphitic carbon nitride (CN) is a promising candidate for use in photocatalytic pollutant degradation, but it only shows moderate activity because of its sluggish photocarrier transfer and insufficient light absorption.

Construction of the 1D Covalent Organic Framework/2D g-C3N4 Heterojunction with High Apparent Quantum Efficiency at 500 nm

The reasonable construction of heterojunction photocatalysts with clear nanostructures and a good interface contact especially the one-dimensional/two-dimensional (1D/2D) composite heterojunction with unique morphology is considered one of the most effective strategies for designing highly efficient photocatalysts. Herein, a series of the 1D β-keto-enamine-based covalent organic framework (COF)/2D g-C₃N₄ composite materials COF-CN (1:x; where 1:x represents the mass ratio of COF and g-C₃N₄, x = 2.5, 5, 10, 15, 20) is prepared through the in situ reaction of 2,4,6-triformylphloroglucinol (Tp) and benzidine (BD) in stripped g-C₃N₄ suspension. A series of characterizations, such as X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), have verified their 1D/2D heterojunction structure. With the introduction of 1D COF nanobelts, the absorption of the composite is largely extended to 560 nm. Photocatalytic experiments reveal that the composite COF/CN shows evidently superior photocatalytic performance than individual COF and g-C₃N₄. The optimized COF-CN (1:10) exhibits a H₂ production rate of 12.8 mmol g^-1·h^-1 under visible-light (λ ≥ 420 nm) irradiation, which is about 62 and 284 times higher than those of COF and g-C₃N₄, respectively. The apparent quantum efficiency (AQE) of COF-CN (1:10) is about 15.09% under 500 nm light irradiation, which is one of the highest among previous COF- or g-C₃N₄-based materials. This work provides important strategies for designing and constructing high-efficiency heterojunction photocatalysts with multidimensional features.