Enhancing Luminescence in Lanthanide-Doped Upconversion Nanoparticles

Exploring the potential of lanthanide-doped oxyfluoride materials for bright green upconversion and their promising applications towards temperature sensing and drug delivery

The most efficient upconversion (UC) materials reported to date are based on fluoride hosts with low phonon energies, which reduce the amount of nonradiative transitions. In particular, NaYF4 doped with Yb3+ and Er3+ at appropriate ratios is known as one of the most efficient UC phosphors. However, its low thermal stability limits its use for certain applications. On the other hand, oxide hosts exhibit better thermal stability, yet they have higher phonon energies and are thus prone to lower UC efficiencies. As a result, developing host nanomaterials that combine the robustness of oxides with the high upconversion efficiencies of fluorides remains an intriguing prospect. Herein, we demonstrate the formation of ytrrium doped oxyfluoride (YOF:Yb3+,Er3+) particles, which are prepared by growing a NaYF4:Yb3+,Er3+ layer around SiO2 spherical particles and consecutively applying a high-temperature annealing step followed by the removal of SiO2 template. Our interest lies in employing these materials as Boltzmann type physiological range luminescence thermometers, but their weak green emission is a drawback. To overcome this issue, and engineer materials suitable for Boltzmann type thermometry, we have studied the effect of introducing different metal ion co-dopants (Gd3+, Li+ or Mn2+) into the YOF:Yb3+,Er3+ particles, focusing on the overall emission intensity, as well as the green to red ratio, upon 975 nm laser excitation. These materials are explored for their use as ratiometric thermometers, and further also as drug carriers, including their simultaneous use for these two applications. The investigation also includes examining their level of toxicity towards specific human cells - normal human dermal fibroblasts (NHDFs) - to evaluate their potential use for biological applications.

Distance-Independent Efficiency of Triplet Energy Transfer from π-Conjugated Organic Ligands to Lanthanide-Doped Nanoparticles

Lanthanide-doped nanoparticles (LnNPs) possess unique optical properties and are employed in various optoelectronic and bioimaging applications. One fundamental limitation of LnNPs is their low absorption cross-section. This hurdle can be overcome through surface modification with organic chromophores with large absorption cross-sections. Controlling energy transfer from organic molecules to LnNPs is crucial for creating optically bright systems, yet the mechanisms are not well understood. Using pump-probe spectroscopy, we follow singlet energy transfer (SET) and triplet energy transfer (TET) in systems comprising different length 9,10-bis(phenylethynyl)anthracene (BPEA) derivatives coordinated onto ytterbium and neodymium-doped nanoparticles. Photoexcitation of the ligands forms singlet excitons, some of which convert to triplet excitons via intersystem crossing when coordinated to the LnNPs. The triplet generation rate and yield are strongly distance-dependent. Following their generation, TET occurs from the ligands to the LnNPs, exhibiting an exponential distance dependence, independent of solvent polarity, suggesting a concerted Dexter-type process with a damping coefficient of 0.60 Å-1. Nevertheless, TET occurs with near-unity efficiency for all BPEA derivatives due to the lack of other triplet deactivation pathways and long intrinsic triplet lifetimes. Thus, we find that close coupling is primarily important to ensure efficient triplet generation rather than efficient TET. Although SET is faster, we find its efficiency to be lower and more strongly distance-dependent than the TET efficiency. Our results present the first direct distance-dependent energy transfer measurements in LnNP@organic nanohybrids and establish the advantage of using the triplet manifold to achieve the most efficient energy transfer and best sensitization of LnNPs with π-conjugated ligands.

Near-Infrared Luminescent Materials Incorporating Rare Earth/Transition Metal Ions: From Materials to Applications

The spotlight has shifted to near-infrared (NIR) luminescent materials emitting beyond 1000 nm, with growing interest due to their unique characteristics. The ability of NIR-II emission (1000-1700 nm) to penetrate deeply and transmit independently positions these NIR luminescent materials for applications in optical-communication devices, bioimaging, and photodetectors. The combination of rare earth metals/transition metals with a variety of matrix materials provides a new platform for creating new chemical and physical properties for materials science and device applications. In this review, the recent advancements in NIR emission activated by rare earth and transition metal ions are summarized and their role in applications spanning bioimaging, sensing, and optoelectronics is illustrated. It started with various synthesis techniques and explored how rare earths/transition metals can be skillfully incorporated into various matrixes, thereby endowing them with unique characteristics. The discussion to strategies of enhancing excitation absorption and emission efficiency, spotlighting innovations like dye sensitization and surface plasmon resonance effects is then extended. Subsequently, a significant focus is placed on functionalization strategies and their applications. Finally, a comprehensive analysis of the challenges and proposed strategies for rare earth/transition metal ion-doped near-infrared luminescent materials, summarizing the insights of each section is provided.

Biomimetic and multifunctional nanocomposites for precision fungi theranostics

Fungi infection is a serious threat to public health, but an effective antifungal strategy remains a challenge. Herein, a biomimetic nanocomposite with multifunctionalities, including fungi diagnosis, antifungal adhesion, precise fungi elimination, and cytokine sequestration, is constructed for battling Candida albicans (C. albicans) infection. By screening a range of cells, we find that the polarized macrophage cells have the strongest binding tendency toward C. albicans. Thus, their membranes were exfoliated to camouflage UCNPs and then decorated with photosensitizers (methylene blue, MB) and DNA sensing elements. The resulting nanocomposite can tightly bind to fungal surfaces, promote DNA recognition, and squeeze pro-inflammatory cytokines to relieve inflammation. Consequently, this nanocomposite can detect C. albicans with enhanced sensitivity and precisely eliminate fungal cells through photodynamic therapy with minimal phototoxicity because of its switchable fluorescence behavior. The developed nanocomposite with good biocompatibility achieves a satisfactory diagnostic and therapeutic effect in a C. albicans-infected mouse model, which offers a unique approach to fight fungi infection.

Degradable bifunctional phototherapy composites based on upconversion nanoparticle-metal phenolic network for multimodal tumor therapy in the near-infrared biowindow

Phototherapy has garnered increasing attention as it allows for precise treatment of tumor sites with its accurate spatiotemporal control. In this study, we have successfully synthesized degradable bifunctional phototherapy agents (UCNPs@mSiO2@MPN-MC540/DOX) based on upconversion nanoparticle (UCNPs) and metal phenolic network (MPN), serving as a novel nanoplatform for multimodal tumor treatment in the near-infrared (NIR) biological window. To address the issue of low light penetration depth, the UCNPs we synthesized exhibited efficient light conversion ability under 808 nm laser irradiation to activate the photosensitizer Merocyanine 540 (MC540) for photodynamic therapy. Simultaneously, the 808 nm NIR light can also excite the MPN layer to achieve photothermal therapy for tumors. Additionally, the MPN layer possesses the capability of self-degradation under weakly acidic conditions. Within the tumor microenvironment, the MPN layer gradually degrades, facilitating the controlled release of the chemotherapy drug doxorubicin (DOX), thus achieving pH-responsive drug release and reducing the side effects of chemotherapy. This study provides an example of NIR-excited multimodal tumor treatment and pH-responsive drug release, offering a therapy model for precise tumor therapy.

Size-independent boosting of near-infrared persistent luminescence in nano-phosphors via a magnesium doping strategy

Near-infrared (NIR)-emitting persistent luminescence nanoparticles (PLNPs) are ideal optical imaging contrast reagents characterized by autofluorescence-free optical imaging for their frontier applications in long-term bioimaging. Preparation of uniform small-sized PLNPs with excellent luminescence performance is crucial for biomedical applications, but challenging. Here, we report a facile magnesium doping strategy to achieve size-independent boost of NIR persistent luminescence in typical and most concerned ZnGa2O4:Cr3+ PLNPs. This strategy relies on the doping of Mg2+ ions that with similar size of Zn2+ ions in the host lattice matrix, and concomitant to the electron traps tailoring tuned by varying the feed ratio of Mg2+. The optimum Mg2+-doped PLNPs give a long afterglow time (signal-to-noise ratio (SNR) = 31.6 at 30 d) without changing the desirable uniform sub-10 nm size of the original nanocrystals. The appropriate increase of the depth and concentration of electron trap contribute jointly to the enhancement of lifetime (488 % longer, 20.57 s) and afterglow time for 700 nm persistent luminescence. Meanwhile, these PLNPs keep the original excellent rechargeability and promote over 60 times increase of SNR in renewable in vivo imaging. This simple strategy provides a basis for new opportunities to address the critical challenge of effective optical performance boost in small-sized PLNPs.

EuIII and TbIII upconversion intermediated by interparticle energy transfer in functionalized NaLnF4 nanoparticles

Lanthanide (LnIII)-doped sodium gadolinium tetrafluoride (NaGdF4) nanoparticles have been excelled as attractive upconversion systems for anti-counterfeiting or energy conversion for instance, with a special interest in the visible upconversion of EuIII and TbIII. The core@shell architecture has enabled the bright upconversion of EuIII and TbIII in this matrix by interfacial energy transfer sensibilized by the TmIII/YbIII pair. Another approach to enable EuIII and TbIII upconversion could be the interparticle energy transfer (IPET) between LnIII-doped sensitizer and acceptor nanoparticles. Yet, the low molar absorptivity of the LnIII through 4f ↔ 4f electronic transitions and the large distance between the nanoparticles are shortcomings that should decrease the energy transfer efficiency. On the other hand, it is feasible to predict that the association of organic ligands displaying large molar absorptivity on the acceptor nanoparticle surface could help to overcome the absorption limitation. Inspired by this exciting possibility, herein, we present the EuIII/TbIII upconversion intermediated by IPET between the donor TmIII, YbIII-doped NaGdF4 nanoparticle and the acceptor LnIII-doped NaGdF4 (Ln = Eu and/or Tb) nanoparticles functionalized with a series organic ligands on the surface (tta- = thenoyltrifluoroacetonate, acac- = acetylacetonate, or 3,5-bbza- = 3,5-dibromebenzoate). Either in solid state or in suspension, upon excitation at 980 nm, visible EuIII/TbIII upconversion could be observed. This emission comes from the absorption of the TmIII, YbIII pair in the donor nanoparticle, followed by IPET from the TmIII excited levels to the ligand singlet/triplet states on the acceptor nanoparticle surface, ligand-to-EuIII/TbIII energy transfer, and upconversion emission. Spectroscopic evidences from the analysis of the donor level lifetimes indicate the contribution of non-radiative energy transfer for the IPET mechanism; the radiative mechanism also contributes for the IPET. Moreover, the design herein introduced enables the development of luminescence temperature probes with relative thermal sensitivity as high as 1.67% K-1 at 373 K. Therefore, this new upconversion pathway opens an avenue of possibilities in an uncharted territory to tune the visible upconversion of LnIII ions.

Synergism Variation between intracellular Glutathione, phycocyanin and SOD in microalgae by carbon quantum dot fluorescence

Based on the use of CQDs as fluorescent probe and covalent coupling method to detect biological molecules with amino groups, to deeply analysis and detect the metabolism of Microcystis aeruginosa. The metabolic changes of carboxyl biomolecules in Microcystis aeruginosa were analyzed by covalent coupling method, including GSH, phycocyanin and SOD enzyme. The changes of GSH content and its correlation between phycocyanin, SOD were analyzed. The content of phycocyanin and SOD reached the maximum on the 65th day, and GSH was more sensitive to the growth and metabolism of microalgae. GSH plays an important role in reducing the external oxidative damage of microalgae cells. The synthesis of glutathione (GSH), GSH/GSSG mutual transformation, the production of phytochelating peptide (PC), the ASA-GSH cycle, and other physiological processes are interconnected. These interactions are crucial for preserving the antioxidant properties of microalgae and regulating redox-sensitive signal transduction.

Dual-Mode Nanoprobes Based on Lanthanide Doped Fluoride Nanoparticles Functionalized by Aryl Diazonium Salts for Fluorescence and SERS Bioimaging

The design of dual-mode fluorescence and Raman tags stimulates a growing interest in biomedical imaging and sensing applications as they offer the possibility to synergistically combine the versatility and velocity of fluorescence imaging with the specificity of Raman spectroscopy. Although lanthanide-doped fluoride nanoparticles (NPs) are among the most studied fluorescent nanoprobes, their use for the development of bimodal fluorescent-Raman probes has never been reported yet, to the best of the authors knowledge, probably due to the difficulty to functionalize them with Raman reporter groups. This gap is filled herein by proposing a fast and straightforward approach based on aryl diazonium salt chemistry to functionalize Eu3+ or Tb3+ doped CaF2 and LaF3 NPs by Raman scatters. The resulting surface-enhanced Raman spectroscopy (SERS)-encoded lanthanide-doped fluoride NPs retain their fluorescence labeling capacity and display efficient SERS activity for cell bioimaging. The potential of this new generation of bimodal nanoprobes is assessed through cell viability assays and intracellular fluorescence and Raman imaging, opening up unprecedented opportunities for biomedical applications.

Modulation of proteins by rare earth elements as a biotechnological tool

Although rare earth element (REE) complexes are often utilized in bioimaging due to their photo- and redox stability, magnetic and optical characteristics, they are also applied for pharmaceutical applications due to their interaction with macromolecules namely proteins. The possible implications induced by REEs through modification in the function or regulatory activity of the proteins trigger a variety of applications for these elements in biomedicine and biotechnology. Lanthanide complexes have particularly been applied as anti-biofilm agents, cancer inhibitors, potential inflammation inhibitors, metabolic elicitors, and helper agents in the cultivation of unculturable strains, drug delivery, tissue engineering, photodynamic, and radiation therapy. This paper overviews emerging applications of REEs in biotechnology, especially in biomedical imaging, tumor diagnosis, and treatment along with their potential toxic effects. Although significant advances in applying REEs have been made, there is a lack of comprehensive studies to identify the potential of all REEs in biotechnology since only four elements, Eu, Ce, Gd, and La, among 17 REEs have been mostly investigated. However, in depth research on ecotoxicology, environmental behavior, and biological functions of REEs in the health and disease status of living organisms is required to fill the vital gaps in our understanding of REEs applications.

Molecularly Targeted Lanthanide Nanoparticles for Cancer Theranostic Applications

Injectable colloidal solutions of lanthanide oxides (nanoparticles between 10 and 100 nm in size) have demonstrated high biocompatibility and no toxicity when the nanoparticulate units are functionalized with specific biomolecules that molecularly target various proteins in the tumor microenvironment. Among the proteins successfully targeted by functionalized lanthanide nanoparticles are folic receptors, fibroblast activation protein (FAP), gastrin-releasing peptide receptor (GRP-R), prostate-specific membrane antigen (PSMA), and integrins associated with tumor neovasculature. Lutetium, samarium, europium, holmium, and terbium, either as lanthanide oxide nanoparticles or as nanoparticles doped with lanthanide ions, have demonstrated their theranostic potential through their ability to generate molecular images by magnetic resonance, nuclear, optical, or computed tomography imaging. Likewise, photodynamic therapy, targeted radiotherapy (neutron-activated nanoparticles), drug delivery guidance, and image-guided tumor therapy are some examples of their potential therapeutic applications. This review provides an overview of cancer theranostics based on lanthanide nanoparticles coated with specific peptides, ligands, and proteins targeting the tumor microenvironment.

Enhancing the upconversion of Er3+ incorporated BaTiO3 by introducing oxygen vacancies

Lanthanide-incorporated crystals display the phenomenon of upconversion (UC), wherein near-infrared (NIR) light is converted into ultraviolet-visible (UV-Vis) emission with a narrow bandwidth. This unique photophysical property renders lanthanide UC materials highly promising for diverse applications. However, the limited quantum efficiency (∼3%) hinders the broader utilization of UC materials. Consequently, numerous studies have focused on overcoming this low efficiency. Notably, it has been observed that manipulation of the site symmetry in UC materials significantly enhances their UC efficiency. In this study, we investigate the UC enhancement of Er3+ incorporated BaTiO3 (E-BT) crystals through the introduction of oxygen vacancies (OV). The OV were created using a post-heat treatment method, and the annealing time was varied to control the quantity of OV. An optimal annealing time of 6 hours was determined for efficient OV generation, beyond which the OV content decreased. Remarkably, E-BT crystals with OV exhibited up to three-fold greater UC compared to those without OV. This outcome suggests that OV induce symmetry changes in the E-BT crystal structure. Furthermore, the degree of UC enhancement in E-BT was found to be proportional to the amount of OV present.

Symmetry and Rigidity for Boosting Erbium-Based Molecular Light-Upconversion in Solution

Previously limited to highly symmetrical homoleptic triple-helical complexes [Er(Lk)3 ]3+ , where Lk are polyaromatic tridentate ligands, single-center molecular-based upconversion using linear optics and exploiting the excited-state absorption mechanism (ESA) greatly benefits from the design of stable and low-symmetrical [LkEr(hfa)3 ] heteroleptic adducts (hfa- =hexafluoroacetylacetonate anion). Depending on (i) the extended π-electron delocalization, (ii) the flexibility and (iii) the heavy atom effect brought by the bound ligand Lk, the near-infrared (801 nm) to visible green (542 nm) upconversion quantum yield measured for [LkEr(hfa)3 ] in solution at room temperature can be boosted by up to three orders of magnitude.

UV-to-NIR Harvesting Conjugated Porous Polymer Nanocomposite: Upconversion and Plasmon Expedited Thioether Photooxidation

Photocatalysts capable of harvesting a broad range of the solar spectrum are essential for sustainable chemical transformations and environmental remediation. Herein, we have integrated NIR-absorbing upconversion nanoparticles (UCNP) with UV-Vis absorbing conjugated porous organic polymer (POP) through the in situ multicomponent C-C coupling to fabricate a UC-POP nanocomposite. The light-harvesting ability of UC-POP is further augmented by loading plasmonic gold nanoparticles (AuNP) into UC-POP. A three-times enhancement in the upconversion luminescence is observed upon the incorporation of AuNP in UC-POP, subsequently boosting the photocatalytic activity of UC-POP-Au. The spectroscopic and photoelectrochemical investigations infer the enhanced photocatalytic oxidation of thioethers, including mustard gas simulant by UC-POP-Au compared to POP and UC-POP due to the facile electron-hole pair generation, suppressed exciton recombination, and efficient charge carrier migration. Thus, the unique design strategy of combining plasmonic and upconversion nanoparticles with a conjugated porous organic polymer opens up new vistas towards artificial light harvesting.

Persistent luminescent nanophosphors for applications in cancer theranostics, biomedical, imaging and security

The extraordinary and unique properties of persistent luminescent (PerLum) nanostructures like storage of charge carriers, extended afterglow, and some other fascinating characteristics like no need for in-situ excitation, and rechargeable luminescence make such materials a primary candidate in the fields of bio-imaging and therapeutics. Apart from this, due to their extraordinary properties they have also found their place in the fields of anti-counterfeiting, latent fingerprinting (LPF), luminescent markings, photocatalysis, solid-state lighting devices, glow-in-dark toys, etc. Over the past few years, persistent luminescent nanoparticles (PLNPs) have been extensively used for targeted drug delivery, bio-imaging guided photodynamic and photo-thermal therapy, biosensing for cancer detection and subsequent treatment, latent fingerprinting, and anti-counterfeiting owing to their enhanced charge storage ability, in-vitro excitation, increased duration of time between excitation and emission, low tissue absorption, high signal-to-noise ratio, etc. In this review, we have focused on most of the key aspects related to PLNPs, including the different mechanisms leading to such phenomena, key fabrication techniques, properties of hosts and different activators, emission, and excitation characteristics, and important properties of trap states. This review article focuses on recent advances in cancer theranostics with the help of PLNPs. Recent advances in using PLNPs for anti-counterfeiting and latent fingerprinting are also discussed in this review.

Development of Highest Value of the Measured Efficiency of Mesoporous Petal Shaped Europium (III) Doped Cobalt Tetroxide@Cupric Oxide Hybrid Nanomaterials for Enhanced Room Temperature Photoluminescence and Fluorescence Decay Properties

In our work, a novel series of europium (III) (Eu3+) (5, 10 and 15 wt %) doped cobalt tetroxide@cupric oxide (Co3O4@CuO) nanomaterials (NMs) were synthesized by facile coprecipitation method. The synthesized NMs were characterized by XRD (X-ray diffraction), FT-IR (Fourier transform infrared), UV (ultraviolet)-visible absorption spectra, XPS (X-ray photoelectron), BET (Brunauer-Emmett-Teller) analytical methods. Crystal structure studies revealed the formation of polycrystalline nature with monoclinic and cubic phase. The morphology studies of Eu3+x:Co3O4@CuO (x = 5, 10 and 15 wt %) showed petal shape nanoparticles (NPs) with agglomeration. Redshift in optical absorption spectra appeared with a significant impact on the optical band gap as Eu3+ concentration increases on Co3O4@CuO bimetallic oxide NMs. The chemical composition and valence state of the elements confirmed from XPS studies detected the presence of Eu, Cu, Co, O and C elements. An increase in the pore size and surface area resulted as the Eu3+ concentration increased on Co3O4@CuO NMs. However, room temperature photoluminescence (RTPL) spectra of Co3O4@CuO bimetallic oxide NMs at two different excitations (λ excitation = 280 nm, 320 nm) showed sharp, strong emission intensities located at near ultraviolet (NUV) region and weak emissions detected at far ultraviolet (FUV) regions of the RTPL spectrum. Further, visible range emission intensities were displayed by Eu3+:Co3O4@CuO (5, 10 and 15 wt %) NMs when exited at 280 nm. The characteristic white light emission peaks in the visible range of the RTPL spectra showed intense blue, green and orange colours. Emission intensity increases with an increase in Eu3+ concentration on Co3O4@CuO bimetallic oxide NMs. The fluorescence (FL) decay spectra of Eu3+ 10wt% and 15 wt%: Co3O4@CuO NMs showed a decay lifetime of 2.54 and 2.31 ns (ns) attributed to the dynamic, ultrafast excitation energy transfer between Eu3+ (dopant) and Co3O4@CuO (host) NMs. It is proposed that enhanced RTPL emission intensity and FL decay behavior of Eu3+x:Co3O4@CuO NMs closely related to the change in the optical band gap, variation in the crystallite size, formation of more number of oxygen vacancies in the crystal structure of hybrid nanomaterials.

Communicating Supraparticles to Enable Perceptual, Information-Providing Matter

Materials are the fundament of the physical world, whereas information and its exchange are the centerpieces of the digital world. Their fruitful synergy offers countless opportunities for realizing desired digital transformation processes in the physical world of materials. Yet, to date, a perfect connection between these worlds is missing. From the perspective, this can be achieved by overcoming the paradigm of considering materials as passive objects and turning them into perceptual, information-providing matter. This matter is capable of communicating associated digitally stored information, for example, its origin, fate, and material type as well as its intactness on demand. Herein, the concept of realizing perceptual, information-providing matter by integrating customizable (sub-)micrometer-sized communicating supraparticles (CSPs) is presented. They are assembled from individual nanoparticulate and/or (macro)molecular building blocks with spectrally differentiable signals that are either robust or stimuli-susceptible. Their combination yields functional signal characteristics that provide an identification signature and one or multiple stimuli-recorder features. This enables CSPs to communicate associated digital information on the tagged material and its encountered stimuli histories upon signal readout anywhere across its life cycle. Ultimately, CSPs link the materials and digital worlds with numerous use cases thereof, in particular fostering the transition into an age of sustainability.

Illuminating the Brain: Advances and Perspectives in Optoelectronics for Neural Activity Monitoring and Modulation

Optogenetic modulation of brain neural activity that combines optical and electrical modes in a unitary neural system has recently gained robust momentum. Controlling illumination spatial coverage, designing light-activated modulators, and developing wireless light delivery and data transmission are crucial for maximizing the use of optical neuromodulation. To this end, biocompatible electrodes with enhanced optoelectrical performance, device integration for multiplexed addressing, wireless transmission, and multimodal operation in soft systems have been developed. This review provides an outlook for uniformly illuminating large brain areas while spatiotemporally imaging the neural responses upon optoelectrical stimulation with little artifacts. Representative concepts and important breakthroughs, such as head-mounted illumination, multiple implanted optical fibers, and micro-light-delivery devices, are discussed. Examples of techniques that incorporate electrophysiological monitoring and optoelectrical stimulation are presented. Challenges and perspectives are posed for further research efforts toward high-density optoelectrical neural interface modulation, with the potential for nonpharmacological neurological disease treatments and wireless optoelectrical stimulation.

Lanthanide molecular cluster-aggregates as the next generation of optical materials

In this perspective, we provide an overview of the recent achievements in luminescent lanthanide-based molecular cluster-aggregates (MCAs) and illustrate why MCAs can be seen as the next generation of highly efficient optical materials. MCAs are high nuclearity compounds composed of rigid multinuclear metal cores encapsulated by organic ligands. The combination of high nuclearity and molecular structure makes MCAs an ideal class of compounds that can unify the properties of traditional nanoparticles and small molecules. By bridging the gap between both domains, MCAs intrinsically retain unique features with tremendous impacts on their optical properties. Although homometallic luminescent MCAs have been extensively studied since the late 1990s, it was only recently that heterometallic luminescent MCAs were pioneered as tunable luminescent materials. These heterometallic systems have shown tremendous impacts in areas such as anti-counterfeiting materials, luminescent thermometry, and molecular upconversion, thus representing a new generation of lanthanide-based optical materials.

Enhancing the upconversion efficiency of NaYF4:Yb,Er microparticles for infrared vision applications

In this study, (NaYF₄:Yb,Er) microparticles dispersed in water and ethanol, were used to generate 540 nm visible light from 980 nm infrared light by means of a nonlinear stepwise two-photon process. IR-reflecting mirrors placed on four sides of the cuvette that contained the microparticles increased the intensity of the upconverted 540 nm light by a factor of three. We also designed and constructed microparticle-coated lenses that can be used as eyeglasses, making it possible to see rather intense infrared light images that are converted to visible.

Seeking Brightness in Molecular Erbium-Based Light Upconversion

Whereas dye-sensitized lanthanide-doped nanoparticles represent an unquestionable advance for pushing linear near-infrared (NIR) to visible-light upconversion within the frame of applications, analogous improvements are difficult to mimic for related but intramolecular processes induced at the molecular level in coordination complexes. Major difficulties arise from the cationic nature of the target cyanine-containing sensitizers (S), which drastically limits their thermodynamic affinities for catching the lanthanide activators (A) required for performing linear light upconversion. In this context, the rare previous design of stable dye-containing molecular SA light-upconverters required large S···A distances at the cost of the operation of only poorly efficient intramolecular S → A energy transfers and global sensitization. With the synthesis of the compact ligand [L2]⁺, we exploit here the benefit of using a single sulfur connector between the dye and the binding unit for counterbalancing the drastic electrostatic penalty which is expected to prevent metal complexation. Quantitative amounts of nine-coordinate [L2Er(hfac)₃]⁺ molecular adducts could be finally prepared in solution at millimolar concentrations, while the S···A distance has been reduced by 40% to reach circa 0.7 nm. Detailed photophysical studies demonstrate the operation of a three times improved energy transfer upconversion (ETU) mechanism for molecular [L2Er(hfac)₃]⁺ in acetonitrile at room temperature, thanks to the boosted heavy atom effect operating in the close cyanine/Er pair. NIR excitation at 801 nm can thus be upconverted into visible light (525-545 nm) with an unprecedented brightness of B^up(801 nm) = 2.0(1) × 10^-3 M^-1·cm^-1 for a molecular lanthanide complex.

CaGdF5 based heterogeneous core@shell upconversion nanoparticles for sensitive temperature measurement

Lanthanide-doped upconversion nanoparticles (UCNPs) have attracted great attention in temperature sensing because of their widespread thermal quenching effect (TQE), a phenomenon in which luminescence intensity decreases as the temperature increases. However, enhancing the TQE of activated ions without changing the dopants or the host is still challenging. Herein, Yb³⁺ and Er³⁺ codoped UCNPs in a cubic CaGdF₅ host were synthesized by a coprecipitation method for optical temperature sensing. Compared with the homogeneous shell (CaGdF₅), those heterogeneous (CaF₂) shelled UCNPs exhibited stronger upconversion luminescence (UCL) due to the significantly reduced multiphonon nonradiative relaxation. Further, we investigated the effects of homogeneous and heterogeneous shells on TQE. The relationship between the intensity ratio of the green emission bands of Er³⁺ ions (²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2) and temperature are obtained for these two core@shell UCNPs. The results demonstrated that the UCNPs with CaF₂ shells are more sensitive to temperature in the 200-300 K. The maximum thermal sensitivity of CaGdF₅:Yb,Er@CaF₂ could reach 2.2% K^-1 at 200 K. These results indicate that the heterogeneous core@shell UCNPs are promising for use as optical temperature sensors.

Emerging ultrasmall luminescent nanoprobes for in vivo bioimaging

Photoluminescence (PL) imaging has become a fundamental tool in disease diagnosis, therapeutic evaluation, and surgical navigation applications. However, it remains a big challenge to engineer nanoprobes for high-efficiency in vivo imaging and clinical translation. Recent years have witnessed increasing research efforts devoted into engineering sub-10 nm ultrasmall nanoprobes for in vivo PL imaging, which offer the advantages of efficient body clearance, desired clinical translation potential, and high imaging signal-to-noise ratio. In this review, we present a comprehensive summary and contrastive discussion of emerging ultrasmall luminescent nanoprobes towards in vivo PL bioimaging of diseases. We first summarize size-dependent nano-bio interactions and imaging features, illustrating the unique attributes and advantages/disadvantages of ultrasmall nanoprobes differentiating them from molecular and large-sized probes. We also discuss general design methodologies and PL properties of emerging ultrasmall luminescent nanoprobes, which are established based on quantum dots, metal nanoclusters, lanthanide-doped nanoparticles, and silicon nanoparticles. Then, recent advances of ultrasmall luminescent nanoprobes are highlighted by surveying their latest in vivo PL imaging applications. Finally, we discuss existing challenges in this exciting field and propose some strategies to improve in vivo PL bioimaging and further propel their clinical applications.

Recent advances in lanthanide-doped up-conversion probes for theranostics

Up-conversion (or anti-Stokes) luminescence refers to the phenomenon whereby materials emit high energy, short-wavelength light upon excitation at longer wavelengths. Lanthanide-doped up-conversion nanoparticles (Ln-UCNPs) are widely used in biomedicine due to their excellent physical and chemical properties such as high penetration depth, low damage threshold and light conversion ability. Here, the latest developments in the synthesis and application of Ln-UCNPs are reviewed. First, methods used to synthesize Ln-UCNPs are introduced, and four strategies for enhancing up-conversion luminescence are analyzed, followed by an overview of the applications in phototherapy, bioimaging and biosensing. Finally, the challenges and future prospects of Ln-UCNPs are summarized.

Up-conversion emission in transition metal and lanthanide co-doped systems: dimer sensitization revisited

Lanthanide (Ln) co-doped transition metal (TM) upconversion (UC) co-doped systems are being intensively investigated for their exciting applications in photonics, bioimaging, and luminescence thermometry. The presence of TM, such as Mo6 + /W6 +, Mn2 +, or Fe3 + determines significant changes in Ln UC emission, such as intensity enhancement, colour modulation, and even the alteration of the photon order. The current mechanism assumes a ground-state absorption/excited-state absorption (ESA/GSA) in TM-Yb dimer followed by direct energy transfer to Er/Tm excited states. We revisit this mechanism by addressing two issues that remain ignored: a dynamical approach to the investigation of the upconversion mechanism and the intrinsic chemical complexity of co-doped TM, Ln systems. To this aim, we employ a pulsed, excitation variable laser across a complete set of UC measurements, such as the emission and excitation spectra and emission decays and analyze multiple grains with transmission electron microscopy (TEM). In the Mo co-doped garnet, the results sustain the co-existence of Mo-free garnet and Mo oxide impurity. In this Mo oxide, the Er upconversion emission properties are fully explained by a relatively efficient sequential Yb to Er upconversion process, with no contribution from Yb-Mo dimer sensitization.

The effect of Er3+ concentration on the kinetics of multiband upconversion in NaYF4:Yb/Er microcrystals

In Yb-Er co-doped upconversion (UC) nanomaterials, upconversion luminescence (UCL) can be modulated to generate multiband UCL emissions by changing the concentration of activator Er³⁺. Nonetheless, the effect of the Er³⁺ concentrations on the kinetics of these emissions is still unknown. We here study the single β-NaYF₄:Yb³⁺/Er³⁺ microcrystal (MC) doped with different Er³⁺ concentrations by nanosecond time-resolved spectroscopy. Interestingly, different Er³⁺ doping concentrations exhibit different UCL emission bands and UCL response rates. At low Er³⁺ doping concentrations (1 mol%), multiband emission in β-NaYF₄:Yb³⁺/Er³⁺ (20/1 mol%) MCs could not be observed and the response rate of UCL was slow (5-10 μs) in β-NaYF₄:Yb³⁺/Er³⁺. Increasing the Er³⁺ doping concentration to 10 mol% can shorten the distance between Yb³⁺ ions and Er³⁺ ions, which promotes the energy transfer between them. β-NaYF₄:Yb³⁺/Er³⁺ (20/10 mol%) can achieve obvious multiband UCL and a quick response rate (0.3 µs). However, a further increase in the Er doping concentration (80 mol%) makes MCs limited by the CR process and cannot achieve the four-photon UC process (⁴F_5/2 → ²K_13/2 and ²H_9/2 → ²D_5/2). Therefore, the result shows that changing the Er³⁺ doping concentration could control the energy flow between the different energy levels in Er³⁺, which could affect the response time and UCL emission of the Yb/Er doped rare earth materials. Our work can facilitate the development of fast-response optoelectronics, optical-sensing, and display industries.

Lanthanide-Doped Upconversion Nanoparticles: Exploring A Treasure Trove of NIR-Mediated Emerging Applications

Lanthanide-doped upconversion nanoparticles (UCNPs) possess the remarkable ability to convert multiple near-infrared (NIR) photons into higher energy ultraviolet-visible (UV-vis) photons, making them a prime candidate for several advanced applications within the realm of nanotechnology. Compared to traditional organic fluorophores and quantum dots (QDs), UCNPs possess narrower emission bands (fwhm of 10-50 nm), large anti-Stokes shifts, low toxicity, high chemical stability, and resistance to photobleaching and blinking. In addition, unlike UV-vis excitation, NIR excitation is nondestructive at lower power intensities and has high tissue penetration depths (up to 2 mm) with low autofluorescence and scattering. Together, these properties make UCNPs exceedingly favored for advanced bioanalytical and theranostic applications, where these systems have been well-explored. UCNPs are also well-suited for bioimaging, optically modulating chemistries, forensic science, and other state-of-the-art research applications. In this review, an up-to-date account of emerging applications in UCNP research, beyond bioanalytical and theranostics, are presented including optogenetics, super-resolution imaging, encoded barcodes, fingerprinting, NIR vision, UCNP-assisted photochemical manipulations, optical tweezers, 3D printing, lasing, NIR-II imaging, UCNP-molecule nanohybrids, and UCNP-based persistent luminescent nanocrystals.

Surface plasmon resonance of Au/Ag metals for the photoluminescence enhancement of lanthanide ion Ln3+ doped upconversion nanoparticles in bioimaging

Deep tissue penetration, chemical inertness and biocompatibility give UCNPs a competitive edge over traditional fluorescent materials like organic dyes or quantum dots. However, the low quantum efficiency of UNCPs becomes an obstacle. Among extensive methods and strategies currently used to prominently solve this concerned issue, surface plasmon resonance (SPR) of noble metals is of great use due to the agreement between the SPR peak of metals and absorption band of UCNPs. A key challenge of this match is that the structures and sizes of noble metals have significant influences on the peak of SPR formants, where achieving an explicit elucidation of relationships between the physical properties of noble metals and their SPR formants is of great importance. This review aims to clarify the mechanism of the SPR effect of noble metals on the optical performance of UCNPs. Furthermore, novel research studies in which Au, Ag or Au/Ag composites in various structures and sizes are combined with UCNPs through different synthetic methods are summarized. We provide an overview of improved photoluminescence for bioimaging exhibited by different composite nanoparticles with respect to UCNPs acting as both cores and shells, taking Au@UCNPs, Ag@UCNPs and Au/Ag@UCNPs into account. Finally, there are remaining shortcomings and latent opportunities which deserve further research. This review will provide directions for the bioimaging applications of UCNPs through the introduction of the SPR effect of noble metals.

Photoswitchable Microgels for Dynamic Macrophage Modulation

Dynamic manipulation of supramolecular self-assembled structures is achieved irreversibly or under non-physiological conditions, thereby limiting their biomedical, environmental, and catalysis applicability. In this study, microgels composed of azobenzene derivatives stacked via π-cation and π-π interactions are developed that are electrostatically stabilized with Arg-Gly-Asp (RGD)-bearing anionic polymers. Lateral swelling of RGD-bearing microgels occurs via cis-azobenzene formation mediated by near-infrared-light-upconverted ultraviolet light, which disrupts intermolecular interactions on the visible-light-absorbing upconversion-nanoparticle-coated materials. Real-time imaging and molecular dynamics simulations demonstrate the deswelling of RGD-bearing microgels via visible-light-mediated trans-azobenzene formation. Near-infrared light can induce in situ swelling of RGD-bearing microgels to increase RGD availability and trigger release of loaded interleukin-4, which facilitates the adhesion structure assembly linked with pro-regenerative polarization of host macrophages. In contrast, visible light can induce deswelling of RGD-bearing microgels to decrease RGD availability that suppresses macrophage adhesion that yields pro-inflammatory polarization. These microgels exhibit high stability and non-toxicity. Versatile use of ligands and protein delivery can offer cytocompatible and photoswitchable manipulability of diverse host cells.

Advances in upconversion luminescence nanomaterial-based biosensor for virus diagnosis

Various infectious viruses have been posing a major threat to global public health, especially SARS-CoV-2, which has already claimed more than six million lives up to now. Tremendous efforts have been made to develop effective techniques for rapid and reliable pathogen detection. The unique characteristics of upconversion nanoparticles (UCNPs) pose numerous advantages when employed in biosensors, and they are a promising candidate for virus detection. Herein, this Review will discuss the recent advancement in the UCNP-based biosensors for virus and biomarkers detection. We summarize four basic principles that guide the design of UCNP-based biosensors, which are utilized with luminescent or electric responses as output signals. These strategies under fundamental mechanisms facilitate the enhancement of the sensitivity of UCNP-based biosensors. Moreover, a detailed discussion and benefits of applying UCNP in various virus bioassays will be presented. We will also address some obstacles in these detection techniques and suggest routes for progress in the field. These progressions will undoubtedly pose UCNP-based biosensors in a prominent position for providing a convenient, alternative approach to virus detection.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

Enhanced luminescence of erbium silicate: interstitial lithium directly regulates the lattice structure of erbium compound crystals

We prepared high-intensity luminescent films with a high LDP (Er³⁺ luminescence lifetime-concentration product) of 1.54 × 10¹⁹ s × cm^-3, where lithium-doped erbium silicate grains are embedded in cristobalite. The near-infrared and up-conversion luminescence intensities of erbium silicate show ∼55 and 40 times enhancement by lithium-doping, respectively. Lithium-doping directly regulates the lattice structure of erbium silicate to enhance luminescence by reducing the crystal field symmetry around erbium, meanwhile, interstitial lithium does not dilute the concentration of erbium ions. Furthermore, lithium-containing dopants promote silica to crystallize, enhancing the luminescence of erbium silicate by reducing the interface defects. These films are expected to achieve high-gain film waveguide amplifiers in chip-scale optoelectronic integration. And this method opens up possibilities to be universally applicable to erbium compounds for enhancing luminescence by directly regulating the lattice structure.

Self-doping induced oxygen vacancies and lattice strains for synergetic enhanced upconversion luminescence of Er3+ ions in 2D BiOCl nanosheets

Rare earth (RE) ions combined with two-dimensional (2D) semiconductors can exhibit unexpected optical properties. However, fluorescence quenching has always been inevitable due to defects associated with the synthesis and doping of 2D materials. In this work, we reported an efficient upconversion (UC) enhancement of Er³⁺ doped BiOCl nanosheets, utilizing a defect engineering strategy conversely rather than eliminating defects. Experiments and theoretical calculations provide evidence that oxygen vacancies (OVs) and lattice strain are simultaneously formed in the BiOCl:Er³⁺ nanosheets through self-doping of Cl^- ions. Under 980 nm excitation, samples doped with 300 mol% Cl^- ions exhibit the best luminescent emission, and the green and red UC emissions are enhanced 3.5 and 15 times, respectively. We showed that the OVs in the 2D semiconductor can act as energy bridges to transfer charges to the Er³⁺ energy level, enriching the electron population at the excited levels; while, the lattice strain enhances the energy transfer and charge accumulation, which synergistically enhance the UC luminescence. This research provides a new insight into the development of defect engineering for UC PL in 2D nanomaterials.

Importance of Rose Bengal Loaded with Nanoparticles for Anti-Cancer Photodynamic Therapy

Rose Bengal (RB) is a photosensitizer (PS) used in anti-cancer and anti-bacterial photodynamic therapy (PDT). The specific excitation of this PS allows the production of singlet oxygen and oxygen reactive species that kill bacteria and tumor cells. In this review, we summarize the history of the use of RB as a PS coupled by chemical or physical means to nanoparticles (NPs). The studies are divided into PDT and PDT excited by X-rays (X-PDT), and subdivided on the basis of NP type. On the basis of the papers examined, it can be noted that RB used as a PS shows remarkable cytotoxicity under the effect of light, and RB loaded onto NPs is an excellent candidate for nanomedical applications in PDT and X-PDT.

Spin-Polarized Photocatalytic CO2 Reduction of Mn-Doped Perovskite Nanoplates

"Spin" has been recently reported as an important degree of electronic freedom to improve the performance of electrocatalysts and photocatalysts. This work demonstrates the manipulations of spin-polarized electrons in CsPbBr₃ halide perovskite nanoplates (NPLs) to boost the photocatalytic CO₂ reduction reaction (CO₂RR) efficiencies by doping manganese cations (Mn²⁺) and applying an external magnetic field. Mn-doped CsPbBr₃ (Mn-CsPbBr₃) NPLs exhibit an outstanding photocatalytic CO₂RR compared to pristine CsPbBr₃ NPLs due to creating spin-polarized electrons after Mn doping. Notably, the photocatalytic CO₂RR of Mn-CsPbBr₃ NPLs is significantly enhanced by applying an external magnetic field. Mn-CsPbBr₃ NPLs exhibit 5.7 times improved performance of photocatalytic CO₂RR under a magnetic field of 300 mT with a permanent magnet compared to pristine CsPbBr₃ NPLs. The corresponding mechanism is systematically investigated by magnetic circular dichroism spectroscopy, ultrafast transient absorption spectroscopy, and density functional theory simulation. The origin of enhanced photocatalytic CO₂RR efficiencies of Mn-CsPbBr₃ NPLs is due to the increased number of spin-polarized photoexcited carriers by synergistic doping of the magnetic elements and applying a magnetic field, resulting in prolonged carrier lifetime and suppressed charge recombination. Our result shows that manipulating spin-polarized electrons in photocatalytic semiconductors provides an effective strategy to boost photocatalytic CO₂RR efficiencies.

Fluorescent Nanoparticles for Super-Resolution Imaging

Super-resolution imaging techniques that overcome the diffraction limit of light have gained wide popularity for visualizing cellular structures with nanometric resolution. Following the pace of hardware developments, the availability of new fluorescent probes with superior properties is becoming ever more important. In this context, fluorescent nanoparticles (NPs) have attracted increasing attention as bright and photostable probes that address many shortcomings of traditional fluorescent probes. The use of NPs for super-resolution imaging is a recent development and this provides the focus for the current review. We give an overview of different super-resolution methods and discuss their demands on the properties of fluorescent NPs. We then review in detail the features, strengths, and weaknesses of each NP class to support these applications and provide examples from their utilization in various biological systems. Moreover, we provide an outlook on the future of the field and opportunities in material science for the development of probes for multiplexed subcellular imaging with nanometric resolution.

NIR-I-Responsive Single-Band Upconversion Emission through Energy Migration in Core-Shell-Shell Nanostructures

Here we report a new strategy to tune both excitation and emission peaks of upconversion nanoparticles (UCNPs) into the first infrared biowindow (NIR-I, 650-900 nm) with high NIR-I-to-NIR-I upconversion efficiency. By introducing the sensitizer Nd³⁺ , activator Er³⁺ , energy migrator Yb³⁺ and energy manipulator Mn²⁺ into specific region to construct proposed energy migration processes in the designed core-shell-shell nanoarchitecture, back energy transfer (BET) from activator to sensitizer or migrator can be greatly blocked and the NIR-to-red upconversion emission can be efficiently promoted. Consequently, BET-induced photon quenching and the undesired green-emitting radiative transition are entirely eliminated, leading to high-efficiency single-band red upconversion emission upon 808 nm NIR-I laser excitation. Our findings provide insights into fundamental lanthanide interactions and advance the development of UCNPs for bioapplications with techniques that overturn traditional limitations.

Liquid crystal-templated chiral nanomaterials: from chiral plasmonics to circularly polarized luminescence

Chiral nanomaterials with intrinsic chirality or spatial asymmetry at the nanoscale are currently in the limelight of both fundamental research and diverse important technological applications due to their unprecedented physicochemical characteristics such as intense light-matter interactions, enhanced circular dichroism, and strong circularly polarized luminescence. Herein, we provide a comprehensive overview of the state-of-the-art advances in liquid crystal-templated chiral nanomaterials. The chiroptical properties of chiral nanomaterials are touched, and their fundamental design principles and bottom-up synthesis strategies are discussed. Different chiral functional nanomaterials based on liquid-crystalline soft templates, including chiral plasmonic nanomaterials and chiral luminescent nanomaterials, are systematically introduced, and their underlying mechanisms, properties, and potential applications are emphasized. This review concludes with a perspective on the emerging applications, challenges, and future opportunities of such fascinating chiral nanomaterials. This review can not only deepen our understanding of the fundamentals of soft-matter chirality, but also shine light on the development of advanced chiral functional nanomaterials toward their versatile applications in optics, biology, catalysis, electronics, and beyond.

Calibration of upconversion luminescence of lanthanide-doped nanoparticle suspensions using Raman scattering

A new, to the best of our knowledge, internal reference method has been developed for the study of the upconversion luminescence of nanoparticle suspensions. This method provides correct analysis and comparison of the luminescent signals obtained under different conditions. To excite the echo signals of samples, it is proposed to use the radiation from an optical parametric oscillator at two wavelengths for the simultaneous excitation of the upconversion luminescence of particles and the Raman scattering signal of the medium in the Stokes region of the spectrum. Due to the linear dependence of the intensity of the Raman scattering of the medium on the excitation power density, the normalization of the upconversion luminescence signal of particles to the intensity of the Raman scattering of the medium makes it possible to eliminate the influences of the instability of the intensity of the laser radiation, light scattering by the medium, inaccuracies in alignment, etc. on the luminescence signal.

Activators Confined Upconversion Nanoprobe with Near-Unity Förster Resonance Energy Transfer Efficiency for Ultrasensitive Detection

Lanthanide-doped upconversion nanoparticles (UCNPs) as energy donors for Förster resonance energy transfer (FRET) are promising in biosensing, bioimaging, and therapeutic applications. However, traditional FRET-based UC nanoprobes show low efficiency and poor sensitivity because only partial activators in UCNPs possessing suitable distance with energy acceptors (<10 nm) can activate the FRET process. Herein, a novel excited-state energy distribution-modulated upconversion nanostructure is explored for highly efficient FRET. Integration of the optimal 4% Er³⁺ doped shell and 100% Yb³⁺ core achieves ∼4.5-fold UC enhancement compared with commonly used NaYF₄:20%Yb³⁺,2%Er³⁺ nanoparticles, enabling maximum donation of excitation energy to an acceptor. The spatial confinement strategy shortens significantly the energy-transfer distance (∼4.5 nm) and thus demonstrates experimentally a 91.9% FRET efficiency inside the neutral red (NR)-conjugated NaYbF₄@NaYF₄:20%Yb³⁺,4%Er³⁺ nanoprobe, which greatly outperforms the NaYbF₄@NaYF₄:20%Yb³⁺,4%Er³⁺@SiO₂@NR nanoprobe (27.7% efficiency). Theoretical FRET efficiency calculation and in situ single-nanoparticle FRET measurement further confirm the excellent energy-transfer behavior. The well-designed nanoprobe shows a much lower detection limit of 0.6 ng/mL and higher sensitivity and is superior to the reported NO₂^- probes. Our work provides a feasible strategy to exploit highly efficient FRET-based luminescence nanoprobes for ultrasensitive detection of analytes.

Sensitization of Nd3+ Luminescence by Simultaneous Two-Photon Excitation through a Coordinating Polymethinic Antenna

We have designed and synthesized two new cyaninic Nd³⁺ complexes where the lanthanide emission can be induced from simultaneous two-photon absorption followed by energy migration. These complexes correspond to a molecular design that uses an antenna ligand formed by the functionalization of a heptamethine dye with 5-ol-phenanthroline or 4-phenyl-terpyridine derivatives. These complexes employ the important nonlinear optical properties of symmetric polymethines to sensitize the lanthanide ion. We verified that simultaneous biphotonic excitation indirectly induces the ⁴F_3/2 → ⁴I_11/2 Nd³⁺ emission using femtosecond laser pulses tuned below the first electronic transition of the antenna. The simultaneous two-photon excitation events initially form the nonlinear-active second excited singlet of the polymethine antenna, which rapidly evolves into its first excited singlet. This state in turn induces the formation of the emissive Nd³⁺ states through energy transfer. The role of the first excited singlet of the antenna as the donor state in this process was verified through time resolution of the antenna's fluorescence. These measurements also provided the rates for antenna-lanthanide energy transfer, which indicate that the phenanthroline-type ligand is approximately five times more efficient for energy transfer than the phenyl-terpyridine derivative due to their relative donor-acceptor distances. The simultaneous two-photon excitation of this polymethine antenna allows for high spatial localization of the Nd³⁺excitation events.

Upconversion luminescence-based aptasensor for the detection of thyroid-stimulating hormone in serum

Thyroid-stimulating hormone (TSH) plays a crucial physiological and pathological role in humans, and a timely and sensitive detection of TSH is critical for early diagnosis and prevention of thyroid-related diseases. Herein, we developed a simple wash-free biological aptasensor based on luminescence resonance energy transfer (LRET) between NaYF₄:Yb,Er upconversion nanoparticles (UCNPs) and tetramethylrhodamine (TAMRA) for the detection of TSH with high sensitivity. In this LRET system, UCNPs as donors and TAMRA as receptors were modified with nucleic acid aptamers Apt-1 and Apt-2, respectively. When TSH was present, the two aptamer strands both specifically recognized TSH to form a hairpin-like structure, thereby shortening the space between UCNPs and TAMRA. The LRET occurred under radiation of 980-nm light. By detecting the change of upconversion luminescence (UCL) intensity (I_545nm), the activity of TSH was quantified. The resulting detection dynamic range and the limit of detection were 0.1-5.0 mIU·L^-1 and 0.065 mIU·L^-1, respectively. The aptasensor using UCNPs as LRET donors was capable of effectively eliminating the background interference of a complicated biological environment, and showed good specificity because of the excellent recognition function of aptamers. Due to high sensitivity, easiness of fabrication, operational convenience, and selectivity, the UCL-based aptasensor is a promising candidate for clinical TSH determination. Based on nucleic acid aptamer and the mechanism of luminescence resonance energy transfer (LRET) between upconversion nanoparticles (UCNPs) donor and tetramethylrhodamine (TAMRA) receptor, an aptasensor was constructed for the quantitative analysis of TSH activity in serum by testing the change of I_545nm.

Luminescence enhancement effects on nanostructured perovskite thin films for Er/Yb-doped solar cells

Recent attempts to improve solar cell performance by increasing their spectral absorption interval incorporate up-converting fluorescent nanocrystals on the structure. These nanocrystals absorb low energy light and emit higher energy photons that can then be captured by the solar cell active layer. However, this process is very inefficient and it needs to be enhanced by different strategies. In this work, we have studied the effect of nanostructuration of perovskite thin films used in the fabrication of hybrid solar cells on their local optical properties. The perovskite surface was engraved with a focused ion beam to form gratings of one-dimensional grooves. We characterized the surfaces with a fluorescence scanning near-field optical microscope, and obtained maps showing a fringe pattern oriented in a direction parallel to the grooves. By scanning structures as a function of the groove depth, ranging from 100 nm to 200 nm, we observed that a 3-fold luminescence enhancement could be obtained for the deeper ones. Near-field luminescence was found to be enhanced between the grooves, not inside them, independent of the groove depth and the incident polarization direction. This indicates that the ideal position of the nanocrystals is between the grooves. In addition, we also studied the influence of the inhomogeneities of the perovskite layer and we observed that roughness tends to locally modify the intensity of the fringes and distort their alignment. All the experimental results are in good agreement with numerical simulations.