Switchable Charge-Transfer in the Photoelectrochemical Energy-Conversion Process of Ferroelectric BiFeO3Photoelectrodes

Polarization Alignment in Polycrystalline BiFeO3 Photoelectrodes for Tunable Band Bending

Polarization in a semiconductor can modulate the band bending via the depolarization electric field (EdP), subsequently tuning the charge separation and transfer (CST) process in photoelectrodes. However, the random orientation of dipole moments in many polycrystalline semiconductor photoelectrodes leads to negligible polarization effect. How to effectively align the dipole moments in polycrystalline photoelectrodes into the same direction to maximize the polarization is still to be developed. Herein, we report that the dipole moments in a ferroelectric BiFeO3 photoelectrode can be controlled under external poling, resulting in a tunable CST efficiency. A negative bias of -40 voltage (V) poling to the photoelectrode leads to an over 110% increase of the CST efficiency, while poling at +40 V, the CST efficiency is reduced to only 41% of the original value. Furthermore, a nearly linear relationship between the external poling voltage and surface potential is discovered. The findings here provide an effective method in tuning the band bending and charge transfer of the emerging ferroelectricity driven solar energy conversion.

Recent Advances in Ferroelectric Materials-Based Photoelectrochemical Reaction

Inorganic perovskite ferroelectric-based nanomaterials as sustainable new energy materials, due to their intrinsic ferroelectricity and environmental compatibility, are intended to play a crucial role in photoelectrochemical field as major functional materials. Because of versatile physical properties and excellent optoelectronic properties, ferroelectric-based nanomaterials attract much attention in the field of photocatalysis, photoelectrochemical water splitting and photovoltaic. The aim of this review is to cover the recent advances by stating the different kinds of ferroelectrics separately in the photoelectrochemical field as well as discussing how ferroelectric polarization will impact functioning of photo-induced carrier separation and transportation in the interface of the compounded semiconductors. In addition, the future prospects of ferroelectric-based nanomaterials are also discussed.

Engineering the Defects and Microstructures in Ferroelectrics for Enhanced/Novel Properties: An Emerging Way to Cope with Energy Crisis and Environmental Pollution

In the past century, ferroelectrics are well known in electroceramics and microelectronics for their unique ferroelectric, piezoelectric, pyroelectric, and photovoltaic effects. Nowadays, the advances in understanding and tuning of these properties have greatly promoted a broader application potential especially in energy and environmental fields, by harvesting solar, mechanical, and heat energies. For example, high piezoelectricity and high pyroelectricity can be designed by defect or microstructure engineering for piezo- and pyro-catalyst, respectively. Moreover, highly piezoelectric and broadband (UV-Vis-NIR) light-responsive ferroelectrics can be designed via defect engineering, giving rise to a new concept of photoferroelectrics for efficient photocatalysis, piezocatalysis, pyrocatalysis, and related cocatalysis. This article first summarizes the recent developments in ferroelectrics in terms of piezoelectricity, pyroelectricity, and photovoltaic effects based on defect and microstructure engineering. Then, the potential applications in energy generation (i.e., photovoltaic effect, H2 generation, and self-powered multisource energy harvesting and signal sensing) and environmental protection (i.e., photo-piezo-pyro- cocatalytic dye degradation and CO2 reduction) are reviewed. Finally, the outlook and challenges are discussed. This article not only covers an overview of the state-of-art advances of ferroelectrics, but also prospects their applications in coping with energy crisis and environmental pollution.

Controlled Porosity in Ferroelectric BaTiO3 Photoanodes

The use of ferroelectric polarization to promote electron-hole separation has emerged as a promising strategy to improve photocatalytic activity. Although ferroelectric thin films with planar geometry have been largely studied, nanostructured and porous ferroelectric thin films have not been commonly used in photo-electrocatalysis. The inclusion of porosity in ferroelectric thin films would enhance the surface area and reactivity, leading to a potential improvement of the photoelectrochemical (PEC) performance. Herein, the preparation of porous barium titanate (pBTO) thin films by a soft template-assisted sol-gel method is reported, and the control of porosity using different organic/inorganic ratios is verified by the combination of scanning electron microscopy and ellipsometry techniques. Using piezoresponse force microscopy, the switching of ferroelectric domains in pBTO thin films is observed, confirming that the ferroelectric polarization is still retained in the porous structures. In addition, the presence of porosity in pBTO thin films leads to a clear improvement of the PEC response. By electrochemical poling, we also demonstrated the tuning of the PEC performance of pBTO thin films via ferroelectric polarization. Our work offers a simple and low-cost approach to control the morphology optimization of ferroelectric thin films, which could open up the development of materials with great potential for PEC applications.

Strategy to Achieve Augmented Photoelectrochemical Water Oxidation via Heteroband Structure Engineering and In Situ Interface Activation

A simple strategy to achieve remarkable activity of photoelectrochemical (PEC) water oxidation is both a critical requirement prior to accelerating the deployment of hydrogen and an important pursuit for renewable solar energy utilization. Despite various ways to improve the PEC performance, laborious fabrication and a statically driven process for water oxidation are still the most challenging tasks. We, herein, demonstrated an extremely simple but extraordinary effective strategy to boost PEC water splitting in a three-dimensional (3D) network structure (Ni foam, i.e., NF)-supported ZnO nanowire (NW)/CdS nanoparticle (NP) (NF/ZnO/CdS) photoelectrode. On the one hand, the establishment and optimization of a heteroband junction between ZnO NWs and CdS NPs substantially reduce the solar energy loss and increase the photocarrier utilization rate at the interface of two phases. On the other hand, the solution flow rotation in the unique macroporous 3D network structure gives rise to obvious piezoelectric (PE) polarization of ZnO located on the skeleton of Ni foam, which can dynamically enforce directional charge transfer. This real-time self-built PE polarization, assisted by the heteroband junction, enables the NF/ZnO/CdS photoanode system to obtain an improved photocurrent density by 12.2-fold compared with pure ZnO (at 1.23 V vs RHE). This work sheds light on an ingenious design strategy for fabricating photoelectrodes that combines a simplified structure and an effectively enhanced water oxidation performance.

A significant enhancement of bulk charge separation in photoelectrocatalysis by ferroelectric polarization induced in CdS/BaTiO3 nanowires

Efficient charge separation, in particular bulk charge separation (BCS), is one of the most critical factors in determining the performance of photoelectrochemical (PEC) water-splitting. The BCS enhancement of CdS/BaTiO3 (CdS/BTO) nanowires (NWs) in photoelectrocatalysis has rarely been reported. This paper describes a remarkable PEC properties promotion of the CdS/BTO NWs, which is confirmed to be a result of the enhanced BCS efficiency induced by the ferroelectric polarization. The vertical arrays of BTO NWs endow fast transfer of carriers. Meanwhile, CdS is decorated uniformly on the surface of BTO NWs, which ensures a wide range of light absorption. After two negative polarizations, the CdS/BTO NWs have successfully obtained a remarkable photocurrent density, achieving 459.53 μA cm-2 at 1.2 V(vs.RHE), which is 2.86 times that of the unpolarized sample. However, after two positive polarizations, the photocurrent density dramatically decreases to 40.18 μA cm-2 at 1.2 V(vs.RHE), which is merely 0.25 times the original value. More importantly, the photocurrent density reaches up to a prominent value of -71.09 mA cm-2 at -0.8 V(vs.RHE) after two successive negative polarizations, which is a 40.87 mA cm-2 enhancement with respect to the sample without poling. Significantly, at -0.8 V(vs.RHE), the BCS efficiency of the CdS/BTO NWs is as high as 91.87% after two negative polarizations. The effects of ferroelectric polarization on the PEC performance of CdS/BTO NWs have been systematically studied. The results demonstrate that ferroelectric polarization, especially negative polarization, results in an internal electric field to tune band bending of CdS/BTO NWs, thus prominently enhancing the PEC performance.

Catalysis based on ferroelectrics: controllable chemical reaction with boosted efficiency

Catalysts, which can accelerate chemical reactions, show promising potential to alleviate environmental pollution and the energy crisis. However, their wide application is severely limited by their low efficiency and poor selectivity due to the recombination of photogenerated electron-hole pairs, the back-reaction of interactants. Accordingly, ferroelectrics have emerged as promising catalysts to address these issues with the advantages of promoted light adsorption, boosted catalytic efficiency as a result of their intrinsic polarization, suppressed electron-hole pair recombination, and superior selectivity via the ferroelectric switch. This review summarizes the recent research progress of catalytic studies based on ferroelectric materials and highlights the controllability of catalytic activity by the ferroelectric switch. More importantly, we also comprehensively highlight the underlying working mechanism of ferroelectric-controlled catalysis to facilitate a deep understanding of this novel chemical reaction and guide future experiments. Finally, the perspectives of catalysis based on ferroelectrics and possible research opportunities are discussed. This review is expected to inspire wide research interests and push ferroelectric catalysis to practical applications.

Facet-selective charge separation in two-dimensional bismuth-based photocatalysts

In this review, we summarize recent advances in the facet design of bismuth-based single-crystal plates based on facet-dependent charge separation for photocatalytic reactions, and the manipulation of the spatial charge separation is highlighted.

Complex Catalytic Materials Based on the Perovskite-Type Structure for Energy and Environmental Applications

This review paper focuses on perovskite-type materials as (photo)catalysts for energy and environmental applications. After a short introduction and the description of the structure of inorganic and hybrid organic-inorganic perovskites, the methods of preparation of inorganic perovskites both as powders via chemical routes and as thin films via laser-based techniques are tackled with, for the first, an analysis of the influence of the preparation method on the specific surface area of the material obtained. Then, the (photo)catalytic applications of the perovskites in energy production either in the form of hydrogen via water photodecomposition or by methane combustion, and in the removal of organic pollutants from waste waters, are reviewed.

Regulation of Ferroelectric Polarization to Achieve Efficient Charge Separation and Transfer in Particulate RuO2 /BiFeO3 for High Photocatalytic Water Oxidation Activity

Exploiting spontaneous polarization of ferroelectric materials to achieve high charge separation efficiency is an intriguing but challenging research topic in solar energy conversion. This work shows that loading high work function RuO₂ cocatalyst on BiFeO₃ (BFO) nanoparticles enhances the intrinsic ferroelectric polarization by efficient screening of charges to RuO₂ via RuO₂ /BFO heterojunction. This leads to enhancement of the surface photovoltage of RuO₂ /BFO single nanoparticles nearly 3 times, the driving force for charge separation and transfer in photocatalytic reactions. Consequently, efficient photocatalytic water oxidation is achieved with quantum efficiency as high as 5.36 % at 560 nm, the highest activity reported so far for ferroelectric materials. This work demonstrates that, unlike low photocurrent density in film-based ferroelectric devices, high photocatalytic activity could be achieved by regulating the ferroelectric spontaneous polarization using appropriate cocatalyst to enhance driving force for efficient separation and transfer of photogenerated charges in particulate ferroelectric semiconductor materials.

Enhancing photoelectrochemical performance of the Bi2MoO6 photoanode by ferroelectric polarization regulation

Photoelectrochemical water splitting provides a promising strategy for converting solar energy into chemical fuels and has attracted extensive interest. Herein, Bi₂MoO₆ nanopillars with large surface areas were fabricated on an ITO-coated glass substrate and their photoelectrochemical properties are enhanced through appropriate manipulation of ferroelectric polarization. The Bi₂MoO₆ photoanode with polarization orientation toward ITO shows an enhanced photocurrent density of 250 μA cm^-2 at 1.23 V vs. reversible hydrogen electrode, which is 28% higher than that of pristine Bi₂MoO₆ nanopillars without macroscopic polarization. The corresponding depolarization electric field benefits the separation of light-excited electron-hole pairs, thus minimizing the recombination of charge carriers and further enhancing the photocurrent current density. Our work offers a new strategy of Bi₂MoO₆-based photoelectrochemical devices with great potential of application in the conversion of solar energy into chemical fuels.

Implementation of ferroelectric materials in photocatalytic and photoelectrochemical water splitting

As a promising technology for sustainable hydrogen generation, photocatalytic (PC) and photoelectrochemical (PEC) water splitting have gathered immense attention over a half-century. While many review articles have covered extensive research achievements and technology innovations in water splitting, this article focuses on illustrating how the ferroelectric polarization influences charge separation and transportation in photocatalyst heterostructures during PC and PEC water splitting. This article first discusses the fundamentals of PC and PEC water splitting and how these electrochemical processes interact with the ferroelectric polarization-induced interfacial band bending, known as piezotronics. A few representative ferroelectric material-based heterogeneous photocatalyst systems are then discussed in detail to illustrate the effects of polarization, space charge region, and free charge concentration, which are critical factors determining the ferroelectric influences. Finally, a forward looking statement is provided to point out the research challenges and opportunities in this promising interdisciplinary research field between ferroelectrics and electrochemistry for clean energy applications.

Heterostructures of ε-Fe2O3 and α-Fe2O3: insights from density functional theory

Many materials used in energy devices or applications suffer from the problem of electron-hole pair recombination. One promising way to overcome this problem is the use of heterostructures in place of a single material. If an electric dipole forms at the interface, such a structure can lead to a more efficient electron-hole pair separation and thus prevent recombination. Here we model and study a heterostructure comprised of two polymorphs of Fe2O3. Each one of the two polymorphs, α-Fe2O3 and ε-Fe2O3, individually shows promise for applications in photoelectrochemical cells. The heterostructure of these two materials is modeled by means of density functional theory. We consider both ferromagnetic as well as anti-ferromagnetic couplings at the interface between the two systems. Both individual oxides are insulating in nature and have an anti-ferromagnetic spin arrangement in their ground state. The same properties are found also in their heterostructure. The highest occupied electronic orbitals of the combined system are localized at the interface between the two iron-oxides. The localization of charges at the interface is characterized by electrons residing close to the oxygen atoms of ε-Fe2O3 and electron-holes localized on the iron atoms of α-Fe2O3, just around the interface. The band alignment at the interface of the two oxides shows a type-III broken band-gap heterostructure. The band edges of α-Fe2O3 are higher in energy than those of ε-Fe2O3. This band alignment favours a spontaneous transfer of excited photo-electrons from the conduction band of α- to the conduction band of ε-Fe2O3. Similarly, photo-generated holes are transferred from the valence band of ε- to the valence band of α-Fe2O3. Thus, the interface favours a spontaneous separation of electrons and holes in space. The conduction band of ε-Fe2O3, lying close to the valence band of α-Fe2O3, can result in band-to-band tunneling of electrons which is a characteristic property of such type-III broken band-gap heterostructures and has potential applications in tunnel field-effect transistors.

Multifunctional Bismuth Ferrite Nanocatalysts with Optical and Magnetic Functions for Ultrasound-Enhanced Tumor Theranostics

Ultrasound (US)-assisted oncotherapy has aroused extensive attention due to its capacities to conquer significant restrictions covering short tissue penetration depth and high phototoxicity in photoinduced therapy. We herein developed a class of pure-phase perovskite-type bimetallic oxide, namely, bismuth ferrite nanocatalysts (BFO NCs), for multimodality imaging-guided and US-enhanced chemodynamic therapy (CDT) against malignant tumors. As-prepared BFO nanoparticles with poly(ethylene glycol)-grafted phosphorylated serine (pS-PEG) modification exhibit satisfactory physiological stability and biocompatibility. The BFO NCs also present high fluorescence emission within the second near-infrared region when irradiated with an 808 nm laser. Intriguingly, the BFO NCs demonstrate highly efficient US-enhanced generation of hydroxyl free radicals, as the cavitation bubbles produced by US trigger partial grievous turbulence and promote the transfer rate of the Fenton reagents. Thus, the BFO NCs enable effective inhibition of tumor growth assisted by external US, and the treatment efficacy can be monitored by computer tomography, magnetic resonance, and fluorescence imaging. Meanwhile, H₂O₂ and US, as a double logic gate, activate the BFO NCs to trigger the iron-catalyzed and US-enhanced CDT with high specificity and treatment efficiency. Therefore, the BFO NCs as a theranostic agent with an enhanced chemodynamic therapeutic effect assisted by external US and a multimodality imaging capacity are put forward, which show a promising prospect for noninvasive chemodynamic oncotherapy.

Growth of Doped SrTiO3 Ferroelectric Nanoporous Thin Films and Tuning of Photoelectrochemical Properties with Switchable Ferroelectric Polarization

Ferroelectric polarization is an intriguing physical phenomenon for tuning charge-transport properties and finds application in a wide range of optoelectronic devices. So far, ferroelectric materials in a planar geometry or chemically grown nanostructures have been used. However, these structural architectures possess serious disadvantages such as small surface areas and structural defects, respectively, leading to reduced performance. Herein, the growth of room-temperature ferroelectric nanoporous/nanocolumnar structure of Ag,Nb-codoped SrTiO₃ (Ag/Nb:STO) using pulsed laser deposition is reported and demonstrated to have enhanced photoelectrochemical (PEC) properties using ferroelectric polarization. By manipulating the external electrical bias, ∼3-fold enhancement in the photocurrent from 40 to 130 μA·cm^-2 of film area is obtained. Concurrently, the flat-band potential is decreased from -0.55 to -1.13 V, revealing a giant ferroelectric tuning of the band alignment at the semiconductor surface and enhanced charge transfer. In addition, an electrochemical impedance spectroscopy study confirmed the tuning of the charge transfer with ferroelectric polarization. Our nanoporous ferroelectric-semiconductor approach offers a new platform with great potential for achieving highly efficient PEC devices for renewable energy applications.

Enhanced Charge Transfer by Passivation Layer in 3DOM Ferroelectric Heterojunction for Water Oxidation in HCO3 - /CO2 System

Photoelectrochemical carbon dioxide conversion to fuels such as carbon monoxide, methanol, and ethylene exhibits great potential to solve energy issues. Unfortunately, CO₂ conversion efficiency is still low due to violent charge recombination at the photoanode. Herein, a novel 3D macroporous ferroelectric heterojunction composed of BiFeO₃ and LiNbO₃ is developed by a template-assisted sol-gel method, aiming at facilitating charge transfer kinetics. As expected, a tremendous enhancement of photocurrent density (300 times vs bare planar BiFeO₃ film) and charge transfer efficiency (up to 76%) is obtained in the HCO₃ ^- /CO₂ system without any cocatalyst. The photoelectrochemical performance is switchable by poling to form a depolarization electric field. Photoelectrochemical impedance spectroscopy reveals that the charge transfer resistance decreases due to the synergistic effect of BiFeO₃ 3D macroporous skeleton and LiNbO₃ passivation layer by tuning surface states. These results suggest a novel strategy for enhancing photoelectrochemical water oxidation as the anodic reaction of CO₂ reduction.

Energy Band Gap Modulation in Nd-Doped BiFeO3/SrRuO3 Heteroepitaxy for Visible Light Photoelectrochemical Activity

The ability of band offsets at multiferroic/metal and multiferroic/electrolyte interfaces in controlling charge transfer and thus altering the photoactivity performance has sparked significant attention in solar energy conversion applications. Here, we demonstrate that the band offsets of the two interfaces play the key role in determining charge transport direction in a downward self-polarized BFO film. Electrons tend to move to BFO/electrolyte interface for water reduction. Our experimental and first-principle calculations reveal that the presence of neodymium (Nd) dopants in BFO enhances the photoelectrochemical performance by reduction of the local electron-hole pair recombination sites and modulation of the band gap to improve the visible light absorption. This opens a promising route to the heterostructure design by modulating the band gap to promote efficient charge transfer.

pH-Dependent photocatalytic performance of modified bismuth vanadate by bismuth ferrite

The photoelectrochemical performance of bismuth vanadate (BVO) improved by a thin layer of bismuth ferrite (BFO).

Rolling dopant and strain in Y-doped BiFeO3 epitaxial thin films for photoelectrochemical water splitting

We report significant photoelectrochemical activity of Y-doped BiFeO₃ (Y-BFO) epitaxial thin films deposited on Nb:SrTiO₃ substrates. The Y-BFO photoanodes exhibit a strong dependence of the photocurrent values on the thickness of the films, and implicitly on the induced epitaxial strain. The peculiar crystalline structure of the Y-BFO thin films and the structural changes after the PEC experiments have been revealed by high resolution X-ray diffraction and transmission electron microscopy investigations. The crystalline coherence breaking due to the small ionic radius Y-addition was analyzed using Willliamson-Hall approach on the 2θ-ω scans of the symmetric (00 l) reflections and confirmed by high resolution TEM (HR-TEM) analysis. In the thinnest sample the lateral coherence length (L_∥) is preserved on larger nanoregions/nanodomains. For higher thickness values L_∥ is decreasing while domains tilt angles (α_tilt) is increasing. The photocurrent value obtained for the thinnest sample was as high as J_ph = 0.72 mA/cm², at 1.4 V(vs. RHE). The potentiostatic scans of the Y-BFO photoanodes show the stability of photoresponse, irrespective of the film’s thickness. There is no clear cathodic photocurrent observation for the Y-BFO thin films confirming the n-type semiconductor behavior of the Y-BFO photoelectrodes.

Piezotronics in Photo-Electrochemistry

Photo-electrochemistry is the major trajectory for directly transforming solar energy into chemical compounds. The performance of a photo-electrochemical (PEC) system is directly related to the interfacial electrical band energy landscape. Recently, piezotronics has stood out as a promising strategy for tuning interfacial energetics. It applies intrinsic or deformation-induced ionic displacements (ferroelectric and piezoelectric polarizations) to engineer the interfacial charge distribution, and thereby the band structures of PEC electrodes. Here, contemporary research efforts of coupling piezotronics with photo-electrochemisty are reviewed. Quantitative band diagrams of a polarization-tuned semiconductor-electrolyte junction are first introduced, with an emphasis on the impact of interface chemistry. Experimental advances of employing piezoelectric and ferroelectric polarizations to enhance the charge separation and transportation, and surface kinetics of PEC water splitting are discussed. Finally, critical challenges of applying piezotronics in PEC systems and promising solutions are presented.

Ferroelectric Materials: A Novel Pathway for Efficient Solar Water Splitting

Over the past few decades, solar water splitting has evolved into one of the most promising techniques for harvesting hydrogen using solar energy. Despite the high potential of this process for hydrogen production, many research groups have encountered significant challenges in the quest to achieve a high solar-to-hydrogen conversion efficiency. Recently, ferroelectric materials have attracted much attention as promising candidate materials for water splitting. These materials are among the best candidates for achieving water oxidation using solar energy. Moreover, their characteristics are changeable by atom substitute doping or the fabrication of a new complex structure. In this review, we describe solar water splitting technology via the solar-to-hydrogen conversion process. We will examine the challenges associated with this technology whereby ferroelectric materials are exploited to achieve a high solar-to-hydrogen conversion efficiency.

Photoelectrochemical Device Designs toward Practical Solar Water Splitting: A Review on the Recent Progress of BiVO4 and BiFeO3 Photoanodes

Solar-driven water splitting technology is considered to be a promising solution for the global energy challenge as it is capable of generating clean chemical fuel from solar energy. Various strategies and catalytic materials have been explored in order to improve the efficiency of the water splitting reaction. Although significant progress has been made, there are many intriguing fundamental phenomena that need to be understood. Herein, we review recent experimental efforts to demonstrate enhancement strategies for efficient solar water splitting, especially for the light absorption, charge carrier separation, and water oxidation kinetics. We also focus on the state of the art of photoelectrochemical (PEC) device designs such as application of facet engineering and the development of a ferroelectric-coupled PEC device. Based on these experimental achievements, future challenges, and directions in solar water splitting technology will be discussed.

Ferroelectric polarization-enhanced charge separation in a vanadium-doped ZnO photoelectrochemical system

A ferroelectric polarization protocol was demonstrated to be favorable for photoinduced charge separation in the V-doped ZnO based photoelectrochemical system.

Reduced graphene oxide/BiFeO3 nanohybrids-based signal-on photoelectrochemical sensing system for prostate-specific antigen detection coupling with magnetic microfluidic device

A novel magnetic controlled photoelectrochemical (PEC) sensing system was designed for sensitive detection of prostate-specific antigen (PSA) using reduced graphene oxide-functionalized BiFeO₃ (rGO-BiFeO₃) as the photoactive material and target-triggered hybridization chain reaction (HCR) for signal amplification. Remarkably enhanced PEC performance could be obtained by using rGO-BiFeO₃ as the photoelectrode material due to its accelerated charge transfer and improved the visible light absorption. Additionally, efficient and simple operation could be achieved by introducing magnetic controlled flow-through device. The assay mainly involved in anchor DNA-conjugated magnetic bead (MB-aDNA), PSA aptamer/trigger DNA (Apt-tDNA) and two glucose oxidase-labeled hairpins (H1-GOx and H2-GOx). Upon addition of target PSA, the analyte initially reacted with the aptamer to release the trigger DNA, which partially hybridized with the anchor DNA on the MB. Thereafter, the unpaired trigger DNA on the MB opened the hairpin DNA structures in sequence and propagated a chain reaction of hybridization events between two alternating hairpins to form a long nicked double-helix with numerous GOx enzymes on it. Subsequently, the enzymatic product (H₂O₂) generated and consumed the photo-excited electrons from rGO-BiFeO₃ under visible light irradiation to enhance the photocurrent. Under optimal conditions, the magnetic controlled PEC sensing system exhibited good photocurrent responses toward target PSA within the linear range of 0.001 - 100ng/mL with a detection limit of 0.31pg/mL. Moreover, favorable selectivity, good stability and satisfactory accuracy were obtained. The excellent analytical performance suggested that the rGO-BiFeO₃-based PEC sensing platform could be a promising tool for sensitive, efficient and low cost detection of PSA in disease diagnostics.

Recent Advances in Bismuth-Based Nanomaterials for Photoelectrochemical Water Splitting

In recent years, bismuth-based nanomaterials have drawn considerable interest as potential candidates for photoelectrochemical (PEC) water splitting owing to their narrow band gaps, nontoxicity, and low costs. The unique electronic structure of bismuth-based materials with a well-dispersed valence band comprising Bi 6s and O 2p orbitals offers a suitable band gap to harvest visible light. This Review presents significant advancements in exploiting bismuth-based nanomaterials for solar water splitting. An overview of the different strategies employed and the new ideas adopted to improve the PEC performance of bismuth-based nanomaterials are discussed. Morphology control, the construction of heterojunctions, doping, and co-catalyst loading are several approaches that are implemented to improve the efficiency of solar water splitting. Key issues are identified and guidelines are suggested to rationalize the design of efficient bismuth-based materials for sunlight-driven water splitting.

Enhanced Photoelectrochemical Performance in Reduced Graphene Oxide/BiFeO3 Heterostructures

BiFeO₃ (BFO)-based ferroelectrics have been proved to be visible-light-driven photoelectrodes for O₂ production. However, the hitherto reported photoelectrochemical performances remain inferior to meet the requirements for any applications. Besides, expensive noble metals (Ag, Au) are commonly required to achieve high photoelectric conversion efficiency. Here, the significant enhancements of photoelectrochemical performance is reported by fabricating a noble-metal-free reduced graphene oxide (RGO)/BFO composite film via a simple and cost-effective solution process. The optimized RGO/BFO composite film exhibits a 600% improvement of the short-circuit photocurrent density compared to that of the pristine BFO, and also outperforms the noble-metal/BFO cells under the same reaction conditions. Furthermore, the incident photon-to-current efficiency of the optimized RGO/BFO sample shows threefold enhancement. This study delivers a facile and low-cost approach to preparing 2D materials/ferroelectric heterostructures and offers a promising pathway to boost the performance of semiconducting ferroelectric photoelectrodes.

Efficient Upconverting Multiferroic Core@Shell Photocatalysts: Visible-to-Near-Infrared Photon Harvesting

We report the two-step synthesis of a core@shell nanohybrid material for visible-to-near-infrared (NIR) photocatalysis. The core is constituted of NaGdF₄:Er³⁺, Yb³⁺ upconverting nanoparticles (UCNPs). A bismuth ferrite (BFO) shell is assembled around the UCNPs via a hydrothermal process. The photocatalytic degradation assays of methylene orange and 4-chlorophenol reveal that these core@shell nanostructures possess remarkably enhanced reaction activity under visible and NIR irradiation, compared to the BFO powder alone and the BFO-UCNP mixture. Photo-charge scavenger tests and fluorescent assays indicate that hydroxyl radicals play a pivotal role in the photodegradation mechanism. The enhanced photoactivity of the core@shell structure is attributed to the NIR radiation which is converted into visible light by UCNPs, and which is then captured by BFO via a nonradiative luminescence resonance energy transfer process. Therefore, this core@shell architecture optimizes solar energy use by efficiently harvesting visible and NIR photons.

Photoelectrochemical Reduction of Carbon Dioxide to Methanol through a Highly Efficient Enzyme Cascade

Natural photosynthesis is an effective route for the clean and sustainable conversion of CO₂ into high-energy chemicals. Inspired by the natural process, a tandem photoelectrochemical (PEC) cell with an integrated enzyme-cascade (TPIEC) system was designed, which transfers photogenerated electrons to a multienzyme cascade for the biocatalyzed reduction of CO₂ to methanol. A hematite photoanode and a bismuth ferrite photocathode were applied to fabricate the iron oxide based tandem PEC cell for visible-light-assisted regeneration of the nicotinamide cofactor (NADH). The cell utilized water as an electron donor and spontaneously regenerated NADH. To complete the TPIEC system, a superior three-dehydrogenase cascade system was employed in the cathodic part of the PEC cell. Under applied bias, the TPIEC system achieved a high methanol conversion output of 220 μm h^-1 , 1280 μmol g^-1  h^-1 using readily available solar energy and water.

Improved photocathodic performance in Pt catalyzed ferroelectric BiFeO3 films sandwiched by a porous carbon layer

A porous carbon buffer layer loaded with Pt is very effective for enhancing the solar-driven H₂ production by the ferroelectric BiFeO₃ film.

Photoelectrochemical Performance Observed in Mn-Doped BiFeO₃ Heterostructured Thin Films

Pure BiFeO₃ and heterostructured BiFeO₃/BiFe_0.95Mn_0.05O₃ (5% Mn-doped BiFeO₃) thin films have been prepared by a chemical deposition method. The band structures and photosensitive properties of these films have been investigated elaborately. Pure BiFeO₃ films showed stable and strong response to photo illumination (open circuit potential kept −0.18 V, short circuit photocurrent density was −0.023 mA·cm⁻²). By Mn doping, the energy band positions shifted, resulting in a smaller band gap of BiFe_0.95Mn_0.05O₃ layer and an internal field being built in the BiFeO₃/BiFe_0.95Mn_0.05O₃ interface. BiFeO₃/BiFe_0.95Mn_0.05O₃ and BiFe_0.95Mn_0.05O₃ thin films demonstrated poor photo activity compared with pure BiFeO₃ films, which can be explained by the fact that Mn doping brought in a large amount of defects in the BiFe_0.95Mn_0.05O₃ layers, causing higher carrier combination and correspondingly suppressing the photo response, and this negative influence was more considerable than the positive effects provided by the band modulation.

Robust Hierarchically Structured Biphasic Ambipolar Oxide Photoelectrodes for Light-Driven Chemical Regulation and Switchable Logic Applications

Tunable ambipolar photoelectrochemical behavior emerges from microdomains of nanostructured p-type CuFeO₂ and n-type Fe₂ O₃ that arise from a single facile solution-processed thin film. The switchable operation of this system is controlled by chemical, optical, or electronic inputs with a uniquely high photocurrent response (on the order of 1 mA cm^-2 ), suitable for robust practical application as an oxygen photoregulator.

Manipulation of charge transfer and transport in plasmonic-ferroelectric hybrids for photoelectrochemical applications

Utilizing plasmonic nanostructures for efficient and flexible conversion of solar energy into electricity or fuel presents a new paradigm in photovoltaics and photoelectrochemistry research. In a conventional photoelectrochemical cell, consisting of a plasmonic structure in contact with a semiconductor, the type of photoelectrochemical reaction is determined by the band bending at the semiconductor/electrolyte interface. The nature of the reaction is thus hard to tune. Here instead of using a semiconductor, we employed a ferroelectric material, Pb(Zr,Ti)O₃ (PZT). By depositing gold nanoparticle arrays and PZT films on ITO substrates, and studying the photocurrent as well as the femtosecond transient absorbance in different configurations, we demonstrate an effective charge transfer between the nanoparticle array and PZT. Most importantly, we show that the photocurrent can be tuned by nearly an order of magnitude when changing the ferroelectric polarization in PZT, demonstrating a versatile and tunable system for energy harvesting.

Photoelectrochemical systems based on plasmonics require control of band bending at the interface as well as transport of hot carriers. Here, Wang et al. employ a ferroelectric material, Pb(Zr,Ti)O₃, with gold on ITO to capture hot electrons from the metal and manipulate the photoexcited charges for energy conversion.

Hydrogen-treated BiFeO3 nanoparticles with enhanced photoelectrochemical performance

Compared with pristine BiFeO₃, hydrogen-treated BiFeO₃ nanoparticles exhibit higher photoelectrochemical performance.