Hydrogen-Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton-Conducting Materials

Self-standing membranes for separation: Achievements and opportunities

Supported membranes and mixed matrix membranes have a limitation of harming the mass transfer due to the incompatibility between the support layer or the matrix and the active components of the membrane. Self-standing membranes, which could structurally abandon the support layer, altogether avoid the adverse effect, thus greatly facilitating the transmembrane mass transfer process. However, the abandonment of the support layer also reduces the membrane's mechanical properties and formability. In this review, our emphasis will be on self-standing membranes within the realm of materials and separation engineering. We will explore the materials employed in the fabrication of self-standing membranes, highlighting their ability to simultaneously enhance membrane performance and promote self-standing characteristics. Additionally, we will delve into the diverse techniques utilized for crafting self-standing membranes, encompassing interfacial polymerization, filtration, solvent casting, Langmuir-Blodgett & layer-by-layer assembly, electrospinning, compression, etc. Throughout the discussion, the merits and drawbacks associated with each of these preparation methods were elucidated. We also provide a brief overview of the applications of self-standing membranes, including water purification, gas separation, organic solvent nanofiltration, electrochemistry, and membrane reactor, as well as a brief description of the general strategies for performance enhancement of self-standing membranes. Finally, the current status of self-standing membranes and the challenges they may encounter were discussed.

Proton Conduction in Chiral Molecular Assemblies of Azolium-Camphorsulfonate Salts

Chiral molecular assemblies have attracted considerable attention because of their interesting physical properties, such as spin-selective electron transport. Cation-anion salts of three azolium cations, imidazolium (HIm+), triazolium (HTrz+), and thiazolium (HThz+), in combination with a chiral camphorsulfonate (1S-CS-) and their racemic compounds (rac-CS-) were prepared and compared in terms of phase transitions, crystal structures, dynamics of constituent molecules, dielectric responses, and proton conductivities. The cation-anion crystals containing HIm+ showed no significant difference in proton conductivity between the homochiral and racemic crystals, whereas the HTrz+-containing crystals showed higher proton conductivity and lower activation energy in the homochiral form than in the racemic form. A two-dimensional hydrogen-bonding network consisting of HTrz+ and -SO3- groups and similar in-plane rotational motion was observed in both crystals; however, the HTrz+ cation in the homochiral crystal exhibited the rotational motion modulated with translational motion, whereas the HTrz+ cation in the racemic crystal exhibited almost steady in-plane rotational motion. The different motional degrees of freedom were confirmed by crystal structure analyses and temperature- and frequency-dependent dielectric constants. In contrast, steady in-plane rotational motion with the thermally activated fluctuating motion of CS- was observed both in homochiral and racemic crystals containing HIm+, which averaged the motional space of protons resulting in similar dielectric responses and proton conductivities. The control of motional degrees of freedom in homochiral crystals affects the proton conductivity and is useful for the design of molecular proton conductors.

Postsynthetic Modification of Hydrogen-Bonded Frameworks

Hydrogen-bonded frameworks have garnered significant attention due to their flexible structures with tailored porosity, making them a promising class of porous framework materials. However, the direct synthesis of hydrogen-bonded frameworks with specific functions is highly challenging due to the unpredictable formation of hydrogen-bonded frameworks. In response, postsynthetic modification has emerged as a potent strategy to imbue desired functions into hydrogen-bonded frameworks. Recent advances have demonstrated the effectiveness of postsynthetic modification in hydrogen-bonded frameworks for studying their mechanical, luminescent, electrochemical, and chiral properties. In this concept, we comprehensively summarize the methodologies and outcomes of postsynthetic modification to hydrogen-bonded frameworks, providing a highlight of this exciting research area.

Controlled crystallisation of porous crystals of luminescent platinum(II) complexes by electronic tuning of ancillary ligands

Porous molecular crystals (PMCs) have gained significant importance as next-generation functional porous materials. However, the selective crystallisation of the PMC phase remains a challenge. Herein, we have systematically controlled the stability of the luminescent PMC phase prepared using the luminescent Pt(II) complex [Pt(pbim)(N^O)] (pbim = 2-phenylbenzimidazolate, N^O = N-heteroaryl carboxylate) with Pt⋯Pt electronic interactions. The PMC phase formation varied significantly among the complexes depending on the heteroaryl group of the ancillary N^O ligand; the oxazolyl-bearing complex did not form a PMC phase, whereas the pyrazyl- and 5-fluoropyridyl-bearing complexes spontaneously formed a porous structure. This difference was rationalised by the π-stacking capability of the heteroaryl group of the ancillary ligand. Furthermore, owing to the presence of the one-dimensional Pt⋯Pt chains in this PMC phase, the photophysical properties of PMCs resulting from the Pt⋯Pt interactions were also significantly changed by the ancillary ligands.

Ultrahigh proton conductivity of four ionic hydrogen-bonded organic frameworks based on functionalized terephthalates

Recently, the utilization of hydrogen-bonded organic frameworks (HOFs) with high crystallinity and inherent well-defined H-bonding networks in the field of proton conduction has received increasing attention, but obtaining HOFs with excellent water stability and prominent proton conductivity (σ) remains challenging. Herein, by employing functionalized terephthalic acids, 2,5-dihydroxyterephthalic acid, 2-hydroxyterephthalic acid, 2-nitro terephthalic acid, and terephthalic acid, respectively, four highly water-stable ionic HOFs (iHOFs), [(C8H5O6)(Me2NH2)]∙2H2O (iHOF 1), [(C8H5O5)(Me2NH2)] (iHOF 2), [(C8H4NO6)(Me2NH2)] (iHOF 3) and [(C8H5O4)(Me2NH2)] (iHOF 4) were efficiently prepared by a straightforward synthesis approach in DMF and H2O solutions. The alternating-current (AC) impedance testing in humid conditions revealed that all four iHOFs were temperature- and humidity-dependent σ, with the greatest value reaching 10-2 S·cm-1. As expected, the high density of free carboxylic acid groups, crystallization water, and protonated [Me2NH2]+ units offer adequate protons and hydrophilic environments for effective proton transport. Furthermore, the σ values of these iHOFs with different functional groups were compared. It was discovered that it dropped in the following order under 100 °C and 98 % relative humidity (RH): σ iHOF 1 (1.72 × 10-2 S·cm-1) > σ iHOF 2 (4.03 × 10-3 S·cm-1) > σ iHOF 3 (1.46 × 10-3 S·cm-1) > σ iHOF 4 (4.86 × 10-4 S·cm-1). Finally, we investigated the causes of the above differences and the proton transport mechanism inside the framework using crystal structure data, water contact angle tests, and activation energy values. This study provides new motivation to develop highly proton-conductive materials.

Flexible hydrogen-bonded organic frameworks (HOFs): opportunities and challenges

Flexible behavior is one of the most fascinating features of hydrogen-bonded organic frameworks (HOFs), which represent an emerging class of porous materials that are self-assembled via H-bonding between organic building units. Due to their unique flexibility, HOFs can undergo structural changes or transformations in response to various stimuli (physical or chemical). Taking advantage of this unique structural feature, flexible HOFs show potential in multifunctional applications such as gas storage/separation, molecular recognition, sensing, proton conductivity, biomedicine, etc. While some other flexible porous materials have been extensively studied, the dynamic behavior of HOFs remains relatively less explored. This perspective highlights the inherent flexible properties of HOFs, discusses their different flexible behaviors, including pore size/shape changes, interpenetration/stacking manner, H-bond breaking/reconstruction, and local dynamic behavior, and highlights their potential applications. We believe that this perspective will not only contribute to HOF chemistry and materials science, but will also facilitate the ongoing extensive research on dynamic porous materials.

Hydrogen Bonds Induced Ultralong Stability of Conductive π-d Conjugated FeCo3(DDA)2 with High OER Activity

Conductive π-d conjugated metal-organic frameworks (MOFs) have attracted wide concerns in electrocatalysis due to their intrinsic high conductivity. However, the poor electrocatalytic stability is still a major problem that hinders the practical application of MOFs. Herein, a novel approach to enhancing the stability of MOF-based electrocatalyst, namely, the introduction of hydrogen bonds (H-bonds), is reported. Impressively, the π-d conjugated MOF FeCo3(DDA)2 (DDA = 1,5-diamino-4,8-dihydroxy-9,10-anthraceneedione) exhibits ultrahigh oxygen evolution reaction (OER) stability (up to 2000 h). The experimental studies demonstrate that the presence of H-bonds in FeCo3(DDA)2 is responsible for its ultrahigh OER stability. Besides that, FeCo3(DDA)2 also displays a prominent OER activity (an overpotential of 260 mV vs reversible hydrogen electrode (RHE) at a current density of 10 mA cm-2 and a Tafel slope of 46.86 mV dec-1). Density functional theory (DFT) calculations further indicate that the synergistic effect of the Fe and Co sites in FeCo3(DDA)2 contributes to its prominent OER performance. This work provides a new avenue of boosting the electrocatalytic stability of conductive π-d conjugated MOFs.

Highly Fluorinated Nanospace in Porous Organic Salts with High Water Stability/Capability and Proton Conductivity

Water in hydrophobic nanospaces shows specific dynamic properties different from bulk water. The investigation of these properties is important in various research fields, including materials science, chemistry, and biology. The elucidation of the correlation between properties of water and hydrophobic nanospaces requires nanospaces covered only with simple hydrophobic group (e.g., fluorine) without impurities such as metals. This work successfully fabricated all-organic diamondoid porous organic salts (d-POSs) with highly fluorinated nanospaces, wherein hydrophobic fluorine atoms are densely exposed on the void surfaces, by combining fluorine substituted triphenylmethylamine (TPMA) derivatives with tetrahedral tetrasulfonic acid. This d-POSs with a highly fluorinated nanospace significantly improved their water stability, retaining their crystal structure even when immersed in water over one week. Moreover, this highly hydrophobic and fluorinated nanospace adsorbs 160 mL(STP)/g of water vapor at Pe/P0=0.90; this is the first hydrophobic nanospace, which water molecules can enter, in an all-organic porous material. Furthermore, this highly fluorinated nanospace exhibits very high proton conductivity (1.34×10-2 S/cm) at 90 °C and 95 % RH. POSs with tailorable nanospaces may significantly advance the elucidation of the properties of specific "water" in pure hydrophobic environments.

Prominent Intrinsic Proton Conduction in Two Robust Zr/Hf Metal-Organic Frameworks Assembled by Bithiophene Dicarboxylate

To date, developing crystalline proton-conductive metal-organic frameworks (MOFs) with an inherent excellent proton-conducting ability and structural stability has been a critical priority in addressing the technologies required for sustainable development and energy storage. Bearing this in mind, a multifunctional organic ligand, 3,4-dimethylthiophene[2,3-b]thiophene-2,5-dicarboxylic acid (H2DTD), was employed to generate two exceptionally stable three-dimensional porous Zr/Hf MOFs, [Zr6O4(OH)4(DTD)6]·5DMF·H2O (Zr-DTD) and [Hf6O4(OH)4(DTD)6]·4DMF·H2O (Hf-DTD), using solvothermal means. The presence of Zr6 or Hf6 nodes, strong Zr/Hf-O bonds, the electrical influence of the methyl group, and the steric effect of the thiophene unit all contribute to their structural stability throughout a wide pH range as well as in water. Their proton conductivity was fully examined at various relative humidities (RHs) and temperatures. Creating intricate and rich H-bonded networks between the guest water molecules, coordination solvent molecules, thiophene-S, -COOH, and -OH units within the framework assisted proton transfer. As a result, both MOFs manifest the maximum proton conductivity of 0.67 × 10-2 and 4.85 × 10-3 S·cm-1 under 98% RH/100 °C, making them the top-performing proton-conductive Zr/Hf-MOFs. Finally, by combining structural characteristics and activation energies, potential proton conduction pathways for the two MOFs were identified.

Structural Design and Energy and Environmental Applications of Hydrogen-Bonded Organic Frameworks: A Systematic Review

Hydrogen-bonded organic frameworks (HOFs) are emerging porous materials that show high structural flexibility, mild synthetic conditions, good solution processability, easy healing and regeneration, and good recyclability. Although these properties give them many potential multifunctional applications, their frameworks are unstable due to the presence of only weak and reversible hydrogen bonds. In this work, the development history and synthesis methods of HOFs are reviewed, and categorize their structural design concepts and strategies to improve their stability. More importantly, due to the significant potential of the latest HOF-related research for addressing energy and environmental issues, this work discusses the latest advances in the methods of energy storage and conversion, energy substance generation and isolation, environmental detection and isolation, degradation and transformation, and biological applications. Furthermore, a discussion of the coupling orientation of HOF in the cross-cutting fields of energy and environment is presented for the first time. Finally, current challenges, opportunities, and strategies for the development of HOFs to advance their energy and environmental applications are discussed.

Network topology diversification of porous organic salts

Hydrogen-bonded organic frameworks (HOFs) are porous organic materials constructed via hydrogen bonds. HOFs have solubility in specific high-polar organic solvents. Therefore, HOFs can be returned to their components and can be reconstructed, which indicates their high recyclability. Network topologies, which are the frameworks of porous structures, control the pore sizes and shapes of HOFs. Therefore, they strongly affect the functions of porous materials. However, hydrogen bonds are usually weak interactions, and the design of the intended network topology in HOFs from their components has been challenging. Porous organic salts (POSs) are an important class of HOFs, are hierarchically constructed via strong charge-assisted hydrogen bonds between sulfonic acids and amines, and therefore are expected to have high designability of the porous structure. However, the network topology of POSs has been limited to only dia-topology. Here, we combined tetrasulfonic acid with the adamantane core (4,4',4'',4'''-(adamantane-1,3,5,7-tetrayl)tetrabenzenesulfonic acid; AdPS) and triphenylmethylamines with modified substituents in para-positions of benzene rings (TPMA-X, X = F, methyl (Me), Cl, Br, I). We changed the steric hindrance between the adamantane and substituents (X) in TPMA-X and obtained not only the common dia-topology for POSs but also rare sod-topology, and lon- and uni-topologies that are formed for the first time in HOFs. Changing template molecules under preparation helped in successfully isolating the porous structures of AdPS/TPMA-Me with dia-, lon-, and sod-topologies which exhibited different gas adsorption properties. Therefore, for the first time, we demonstrated that the steric design of HOF components facilitated the formation, diversification, and control of the network topologies and functions of HOFs.

Vitrification-enabled enhancement of proton conductivity in hydrogen-bonded organic frameworks

Hydrogen-bonded organic frameworks (HOFs) are versatile materials with potential applications in proton conduction. Traditional approaches involve incorporating humidity control to address grain boundary challenges for proton conduction. This study finds vitrification as an alternative strategy to eliminate grain boundary effect in HOFs by rapidly melt quenching the kinetically stable HOF-SXU-8 to glassy state HOF-g. Notably, a remarkable enhancement in proton conductivity without humidity was achieved after vitrification, from 1.31 × 10-7 S cm-1 to 5.62× 10-2 S cm-1 at 100 °C. Long term stability test showed negligible performance degradation, and even at 30 °C, the proton conductivity remained at high level of 1.2 × 10-2 S cm-1. Molecule dynamics (MD) simulations and X-ray total scattering experiments reveal the HOF-g system is consisted of three kinds of clusters, i.e., 1,5-Naphthalenedisulfonic acid (1,5-NSA) anion clusters, N,N-dimethylformamide (DMF) molecule clusters, and H+-H2O clusters. In which, the H+ plays an important role to bridge these clusters and the high conductivity is mainly related to the H+ on H3O+. These findings provide valuable insights for optimizing HOFs, enabling efficient proton conduction, and advancing energy conversion and storage devices.

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Proton exchange membranes (PEMs) have emerged as very promising membranes for automotive applications because of their notable proton conductivity at low temperatures. These membranes find extensive utilization in fuel cells. Several polymeric materials have been used, but their application is constrained by their expense and intricate synthetic processes. Affordable and efficient synthetic methods for polymeric materials are necessary for the widespread commercial use of PEM technology. The polymeric combination of hexachlorocyclotriphosphazene (HCCP) and 4,4-diamino-2,2-biphenyldisulfonic acid facilitated the synthesis of PP-(PhSO3H)2, a polyphosphazene with built-in -SO3H moieties. Characterization revealed that it was a porous organic polymer with high stability. PP-(PhSO3H)2 exhibited a proton conductivity of up to 8.24 × 10-2 S cm-1 (SD = ±0.031) at 353 K under 98% relative humidity (RH), which was more than two orders of magnitude higher than that of its -SO3H-free analogue, PP-(Ph)2 (2.32 × 10-4 S cm-1) (SD = ±0.019) under identical conditions. Therefore, for application in a PEM fuel cell, PP-(PhSO3H)2-based matrix-mixed membranes (PP-(PhSO3H)2-MMMs) were fabricated by mixing them with polyacrylonitrile (PAN) in various ratios. The proton conductivity could reach up to 6.11 × 10-2 S cm-1 (SD = ±0.0048) at 353 K and 98%RH, when the weight ratio of PP-(PhSO3H)2 : PAN was 3 : 1, the value of which was comparable with those of commercially available electrolytes used in PEM fuel cells. PP-(PhSO3H)2-MMM (3 : 1) had an extended lifetime of reusability. Using phosphazene and bisulfonated multiple-amine modules as precursors, we demonstrated that a porous organic polymer with a highly effective proton-conductive matrix-mixed membrane for PEM fuel cells could be produced readily by an intuitive polymeric reaction.

Bio-Inspired Subnanofluidics: Advanced Fabrication and Functionalization

Biological ion channels can realize high-speed and high-selective ion transport through the protein filter with the sub-1-nanometer channel. Inspired by biological ion channels, various kinds of artificial subnanopores, subnanochannels, and subnanoslits with improved ion selectivity and permeability are recently developed for efficient separation, energy conversion, and biosensing. This review article discusses the advanced fabrication and functionalization methods for constructing subnanofluidic pores, channels, tubes, and slits, which have shown great potential for various applications. Novel fabrication methods for producing subnanofluidics, including top-down techniques such as electron beam etching, ion irradiation, and electrochemical etching, as well as bottom-up approaches starting from advanced microporous frameworks, microporous polymers, lipid bilayer embedded subnanochannels, and stacked 2D materials are well summarized. Meanwhile, the functionalization methods of subnanochannels are discussed based on the introduction of functional groups, which are classified into direct synthesis, covalent bond modifications, and functional molecule fillings. These methods have enabled the construction of subnanochannels with precise control of structure, size, and functionality. The current progress, challenges, and future directions in the field of subnanofluidic are also discussed.

Charge-Assisted Ionic Hydrogen-Bonded Organic Frameworks: Designable and Stabilized Multifunctional Materials

Hydrogen-bonded organic frameworks (HOFs) are a class of crystalline framework materials assembled by hydrogen bonds. HOFs have the advantages of high crystallinity, mild reaction conditions, good solution processability, and reproducibility. Coupled with the reversibility and flexibility of hydrogen bonds, HOFs can be assembled into a wide diversity of crystalline structures. Since the bonding energy of hydrogen bonds is lower than that of ligand and covalent bonds, the framework of HOFs is prone to collapse after desolventisation and the stability is not high, which limits the development and application of HOFs. In recent years, numerous stable and functional HOFs have been developed by π-π stacking, highly interpenetrated networks, charge-assisted, ligand-bond-assisted, molecular weaving, and covalent cross-linking. Charge-assisted ionic HOFs introduce electrostatic attraction into HOFs to improve stability while enriching structural diversity and functionality. In this paper, we review the development, the principles of rational design and assembly of charge-assisted ionic HOFs, and introduces the different building block construction modes of charge-assisted ionic HOFs. Highlight the applications of charge-assisted ionic HOFs in gas adsorption and separation, proton conduction, biological applications, etc., and prospects for the diverse design of charge-assisted ionic HOFs structures and multifunctional applications.

Proton Conductivity in a Metal-Organic Cube-Based Framework and Derived Hydrogel with Tubular Morphology

The hydrogels, formed by self-assembly of predesigned, discrete metal-organic cubes (MOCs), have emerged as a new type of functional soft material whose diverse properties are yet to be explored. Here, we explore the proton conductivity of a MOC-based supramolecular porous framework {(Me2NH2)12[Ga8(ImDC)12]·DMF·29H2O} (1) (ImDC = 4,5-imidazole dicarboxylate) and derived hydrogel (MOC-G1). The intrinsic charge-assisted H-bonded (between anionic MOC {[Ga8(ImDC)12]12-} and dimethylammonium cations) framework 1 exhibits an ambient condition proton conductivity value of 2.3 × 10-5 S cm-1 (@40% RH) which increases with increasing temperature (8.2 × 10-4 S cm-1 at 120 °C and 40% RH) and follows the Grotthuss type of mechanism of proton conduction. Self-assembly of the MOCs in the presence of ammonium cations, as molecular binders, resulted in a hydrogel (MOC-G1) that shows directional H-bonded 1D nanotubular morphology. While guest water molecules are immensely important in deciding the proton conductivity of both 1 and MOC-G1, the presence of additional proton carriers, such as DMA and ammonium cations, resulted in at least 1 order increment in the proton conductivity of the latter (1.8 × 10-2 S cm-1) than the former (1.4 × 10-3 S cm-1) under 25 °C and 98% RH condition. The values of proton conductivity of 1 and MOC-G1 are comparable with those of the best proton conduction reports in the literature. This work may pave the way for the development of proton conductors with unique architecture and conductivity requisite for the state-of-the-art technologies by selecting appropriate MOC and molecular binders.

Orthogonal Postsynthetic Copolymerization of Hydrogen-Bonded Organic Frameworks into a PolyHOF Membrane

Hydrogen-bonded organic frameworks (HOFs) have shown promise in various fields; however, the construction of HOF/polymer hybrid membranes that can maintain both structural and functional integrity remains challenging. In this study, we here fabricated a new HOF (HOF-50) with reserved polymerizable allyl group via charge-assisted H-bonds between the carboxylate anion and amidinium, and subsequently copolymerized the HOF with monomers to construct a covalently bonded HOF/polymer hybrid (polyHOF) membrane. The resulting polyHOF membrane not only exhibits customizable mechanical properties and extreme stability, but also shows an exceptional ratiometric luminescent temperature-sensing function with very high sensitivity and visibility even when the lanthanide content is two orders of magnitude lower than that of the reported mixed-lanthanide metal-organic frameworks (MOFs) and lanthanide-doped covalent organic frameworks (COFs). This orthogonal postsynthesis copolymerization strategy may provide a general approach for preparing covalently connected HOF/polymer hybrid membranes for diverse applications.

Green solvent systems for material syntheses and chemical reactions

It is of great significance to develop environmentally benign, non-volatile and recyclable green solvents for different applications. This feature article overviews the properties of green solvent systems (e.g., ionic liquids, supercritical carbon dioxide, deep eutectic solvents and mixed green solvent systems) and their applications in (1) framework material syntheses, including metal-organic frameworks, covalent organic frameworks and hydrogen-bonded organic frameworks, and (2) CO2 conversion reactions, including photocatalytic and electrocatalytic reduction reactions. Finally, the future perspective for research on green solvent systems is proposed from different aspects.

Hydrogen-bonded organic frameworks for membrane separation

Hydrogen-bonded organic frameworks (HOFs) are a new class of crystalline porous materials that are formed through the interconnection of organic or metal-organic building units via intermolecular hydrogen bonds. The remarkable flexibility and reversibility of hydrogen bonds, coupled with the customizable nature of organic units, endow HOFs with mild synthesis conditions, high crystallinity, solvent processability, and facile self-healing and regeneration properties. Consequently, these features have garnered significant attention across various fields, particularly in the realm of membrane separation. Herein, we present an overview of the recent advances in HOF-based membranes, including their advanced fabrication strategies and fascinating applications in membrane separation. To attain the desired HOF-based membranes, careful consideration is dedicated to crucial factors such as pore size, stability, hydrophilicity/hydrophobicity, and surface charge of the HOFs. Additionally, diverse preparation methods for HOF-based membranes, including blending, in situ growth, solution-processing, and electrophoretic deposition, have been analyzed. Furthermore, applications of HOF-based membranes in gas separation, water treatment, fuel cells, and other emerging application areas are presented. Finally, the challenges and prospects of HOF-based membranes are critically pointed out.

Crystalline porous organic salts

Crystalline porous organic salts (CPOSs), formed by the self-assembly of organic acids and organic bases through ionic bonding, possess definite structures and permanent porosity and have rapidly emerged as an important class of porous organic materials in recent years. By rationally designing and controlling tectons, acidity/basicity (pKa), and topology, stable CPOSs with permanent porosity can be efficiently constructed. The characteristics of ionic bonds, charge-separated highly polar nano-confined channels, and permanent porosity endow CPOSs with unique physicochemical properties, offering extensive research opportunities for exploring their functionalities and application scenarios. In this review, we systematically summarize the latest progress in CPOS research, describe the synthetic strategies for synthesizing CPOSs, delineate their structural characteristics, and highlight the differences between CPOSs and hydrogen-bonded organic frameworks (HOFs). Furthermore, we provide an overview of the potential applications of CPOSs in areas such as negative linear compression (NLC), proton conduction, rapid transport of CO2, selective and rapid transport of K+ ions, atmospheric water harvesting (AWH), gas sorption, molecular rotors, fluorescence modulation, room-temperature phosphorescence (RTP) and catalysis. Finally, the challenges and future perspectives of CPOSs are presented.

Boosting H+ Storage in Aqueous Zinc Ion Batteries via Integrating Redox-Active Sites into Hydrogen-Bonded Organic Frameworks with Strong π-π Stacking

In the emerging aqueous zinc ion batteries (AZIBs), proton (H+ ) with the smallest molar mass and fast (de)coordination kinetics is considered as the most ideal charge carrier compared with Zn2+ counterpart, however, searching for new hosting materials for H+ storage is still at its infancy. Herein, redox-active hydrogen-bonded organic frameworks (HOFs) assembled from diaminotriazine moiety decorated hexaazatrinnphthalene (HOF-HATN) are for the first time developed as the stable cathode hosting material for boosting H+ storage in AZIBs. The unique integration of hydrogen-bonding networks and strong π-π stacking endow it rapid Grotthuss proton conduction, stable supramolecular structure and inclined H+ storage. As a consequence, HOF-HATN displays a high capacity (320 mAh g-1 at 0.05 A g-1 ) and robust cyclability of (>10000 cycles at 5 A g-1 ) based on three-step cation coordination storage. These findings get insight into the proton transport and storage behavior in HOFs and provide the molecular engineering strategy for constructing well-defined cathode hosting materials for rechargeable aqueous batteries.

Multistate structures in a hydrogen-bonded polycatenation non-covalent organic framework with diverse resistive switching behaviors

The inherent structural flexibility and reversibility of non-covalent organic frameworks have enabled them to exhibit switchable multistate structures under external stimuli, providing great potential in the field of resistive switching (RS), but not well explored yet. Herein, we report the 0D+1D hydrogen-bonded polycatenation non-covalent organic framework (HOF-FJU-52), exhibiting diverse and reversible RS behaviors with the high performance. Triggered by the external stimulus of electrical field E at room temperature, HOF-FJU-52 has excellent resistive random-access memory (RRAM) behaviors, comparable to the state-of-the-art materials. When cooling down below 200 K, it was transferred to write-once-read-many-times memory (WORM) behaviors. The two memory behaviors exhibit reversibility on a single crystal device through the temperature changes. The RS mechanism of this non-covalent organic framework has been deciphered at the atomic level by the detailed single-crystal X-ray diffraction analyses, demonstrating that the structural dual-flexibility both in the asymmetric hydrogen bonded dimers within the 0D loops and in the infinite π-π stacking column between the loops and chains contribute to reversible structure transformations between multi-states and thus to its dual RS behaviors.

Bioinspired Heterogeneous Construction of Lignocellulose-Reinforced COF Membranes for Efficient Proton Conduction

The exponential interest in covalent organic frameworks (COFs) arises from the direct correlation between their diverse and intriguing properties and the modular design principle. However, the insufficient interlamellar interaction among COF nanosheets greatly hinders the formation of defect-free membranes. Therefore, developing a methodology for the facile fabrication of these materials remains an enticing and highly desirable objective. Herein, ultrahigh proton conductivity and superior stability are achieved by taking advantage of COF composite membranes where 2D TB-COF nanosheets are linked by 1D lignocellulosic nanofibrils (LCNFs) through π-π and electrostatic interactions to form a robust and ordered structure. Notably, the high concentration of -SO3 H groups within the COF pores and the abundant proton transport paths at COFs-LCNFs interfaces impart composite membranes ultrahigh proton conductivity (0.348 S cm-1 at 80 °C and 100% RH). Moreover, the directional migration of protons along the stacked nanochannels of COFs is facilitated by oxygen atoms on the keto groups, as demonstrated by density functional theory (DFT) calculations. The simple design concept and reliable operation of the demonstrated mixed-dimensional composite membrane are expected to provide an ideal platform for next-generation conductive materials.

From non-conductive MOF to proton-conducting metal-HOFs: a new class of reversible transformations induced by solvent-free mechanochemistry

Proton-conducting materials play an important role as solid electrolytes in electrochemical devices for energy storage and conversion, including proton exchange membrane fuel cells. Metal-organic frameworks (MOFs), covalent-organic frameworks (COFs) and more recently hydrogen-bonded organic frameworks (HOFs) have emerged as useful crystalline platforms for proton transport that provide high conductivity and enable insight into conduction pathways. Here, we present two new HOFs with high conductivity, reaching 2 × 10-2 S cm-1 at 60 °C and 75% relative humidity, obtained in reactions that represent a new class of reversible transformations of solids. The reactions are induced by solvent-free mechanochemistry and involve breaking of coordination linkages in a MOF and formation of extended hydrogen-bonded networks of metal-HOFs (MHOFs). This unprecedented class of MOF-to-MHOF transformations has been demonstrated using a non-conductive MOF (JUK-1) and formamidinium or methylammonium thiocyanates as solid reactants. Structural details of the solid-state reactions are revealed by powder X-ray diffraction and Rietveld refinements for the MHOF products. None of the attempts using conventional methods were successful in obtaining the MHOFs, emphasizing a unique role of mechanochemical stimuli in the reactivity of supramolecular polymer solids, including crystalline MOFs and HOFs. The reversible nature of non-covalent interactions in such materials may be utilized for the development of healable polymer systems.

Hydrogen-Bonding Assembly Meets Anion Coordination Chemistry: Framework Shaping and Polarity Tuning for Xenon/Krypton Separation

Hybrid hydrogen-bonded (H-bonded) frameworks built from charged components or metallotectons offer diverse guest-framework interactions for target-specific separations. We present here a study to systematically explore the coordination chemistry of monovalent halide anions, i.e., F- , Cl- , Br- , and I- , with the aim to develop hybrid H-bond synthons that enable the controllable construction of microporous H-bonded frameworks exhibiting fine-tunable surface polarity within the adaptive cavities for realistic xenon/krypton (Xe/Kr) separation. The spherical halide anions, especially Cl- , Br- , and I- , are found to readily participate in the charge-assisted H-bonding assembly with well-defined coordination behaviors, resulting in robust frameworks bearing open halide anions within the distinctive 1D pore channels. The activated frameworks show preferential binding towards Xe (IAST Xe/Kr selectivity ca. 10.5) because of the enhanced polarizability and the pore confinement effect. Specifically, dynamic column Xe/Kr separation with a record-high separation factor (SF=7.0) among H-bonded frameworks was achieved, facilitating an efficient Xe/Kr separation in dilute, CO2 -containing gas streams exactly mimicking the off-gas of spent nuclear fuel (SNF) reprocessing.

Robust Hydrogen-Bonded Organic Framework with Four-Fold Interpenetration for Adsorptive Separation of C2H6/C2H4 and Xe/Kr

Hydrogen-bonded organic frameworks (HOFs) are an emerging class of porous materials that hold promise for the adsorptive separation of industrially relevant gas mixtures. However, developing HOFs with high thermal stability and resistance to water remains a daunting challenge. We report here a microporous HOF (HIAM-103) assembled from a hexacarboxylate linker (2,4,6-trimethylbenzene-1,3,5-triylisophthalic acid, H6TMBTI). The compound crystallizes in the trigonal crystal system, and its structure is a four-fold interpenetrated network. Upon thermal activation, the single crystals remain intact, allowing for precise determination of the activated structure. HIAM-103 exhibits remarkable thermal and hydrothermal stability. Its microporous channels demonstrate selective adsorption of C2H6 over C2H4 and Xe over Kr, and its separation capability toward mixed gases has been validated by column breakthrough experiments under dry and humid conditions. The preferential gas adsorption sites and separation mechanisms have been uncovered through DFT analysis, which suggests that the methyl group decorated 1D channels are the primary reason for the selective adsorption.

Controlling the Crystallisation and Hydration State of Crystalline Porous Organic Salts

Crystalline porous organic salts (CPOS) are a subclass of molecular crystals. The low solubility of CPOS and their building blocks limits the choice of crystallisation solvents to water or polar alcohols, hindering the isolation, scale-up, and scope of the porous material. In this work, high throughput screening was used to expand the solvent scope, resulting in the identification of a new porous salt, CPOS-7, formed from tetrakis(4-sulfophenyl)methane (TSPM) and tetrakis(4-aminophenyl)methane (TAPM). CPOS-7 does not form with standard solvents for CPOS, rather a hydrated phase (Hydrate2920) previously reported is isolated. Initial attempts to translate the crystallisation to batch led to challenges with loss of crystallinity and Hydrate2920 forming favorably in the presence of excess water. Using acetic acid as a dehydrating agent hindered formation of Hydrate2920 and furthermore allowed for direct conversion to CPOS-7. To allow for direct formation of CPOS-7 in high crystallinity flow chemistry was used for the first time to circumvent the issues found in batch. CPOS-7 and Hydrate2920 were shown to have promise for water and CO2 capture, with CPOS-7 having a CO2 uptake of 4.3 mmol/g at 195 K, making it one of the most porous CPOS reported to date.

Cobalt Hydrogen-Bonded Organic Framework as a Visible Light-Driven Photocatalyst for CO2 Cycloaddition Reaction

A novel cobalt hydrogen-bonded organic framework (Co-HOF, C24H14CoN4O8) was synthesized from a mixed linker, that is, 2,5-pyridinedicarboxylic acid (PDC) and 2,2'-bipyridyl (BPY) linkers and cobalt ion through a simple, one-pot, low-cost, and scalable solvothermal method. The Co-HOF was fully characterized using several analytical and spectroscopic techniques including single-crystal X-ray diffraction, diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray, and X-ray photoelectron spectroscopy. The Co-HOF exhibits high thermal and chemical stabilities compared to previously reported HOF materials. Moreover, Co-HOF shows excellent photocatalytic activity under visible light irradiation due to its narrow band gap of 2.05 eV. The cycloaddition reaction of CO2 to variable epoxides was investigated to evaluate the photocatalytic performance of Co-HOF under visible light radiation and was found to produce the corresponding cyclic carbonates in yields up to 99.9%.

Pore Modulation of Hydrogen-Bonded Organic Frameworks for Efficient Separation of Propylene

Developing hydrogen-bonded organic frameworks (HOFs) that combine functional sites, size control, and storage capability for targeting gas molecule capture is a novel and challenging venture. However, there is a lack of effective strategies to tune the hydrogen-bonded network to achieve high-performance HOFs. Here, a series of HOFs termed as HOF-ZSTU-M (M=1, 2, and 3) with different pore structures are obtained by introducing structure-directing agents (SDAs) into the hydrogen-bonding network of tetrakis (4-carboxyphenyl) porphyrin (TCPP). These HOFs have distinct space configurations with pore channels ranging from discrete to continuous multi-dimensional. Single-crystal X-ray diffraction (SCXRD) analysis reveals a rare diversity of hydrogen-bonding models dominated by SDAs. HOF-ZSTU-2, which forms a strong layered hydrogen-bonding network with ammonium (NH4 + ) through multiple carboxyl groups, has a suitable 1D "pearl-chain" channel for the selective capture of propylene (C3 H6 ). At 298 K and 1 bar, the C3 H6 storage density of HOF-ZSTU-2 reaches 0.6 kg L-1 , representing one of the best C3 H6 storage materials, while offering a propylene/propane (C3 H6 /C3 H8 ) selectivity of 12.2. Theoretical calculations and in situ SCXRD provide a detailed analysis of the binding strength of C3 H6 at different locations in the pearl-chain channel. Dynamic breakthrough tests confirm that HOF-ZSTU-2 can effectively separate C3 H6 from multi-mixtures.

Industrial Separation Challenges: How Does Supramolecular Chemistry Help?

The chemical industry and the chemical processes underscoring it are under intense scrutiny as the demands for the transition to more sustainable and environmentally friendly practices are increasing. Traditional industrial separation systems, such as thermally driven distillation for hydrocarbon purification, are energy intensive. The development of more energy efficient separation technologies is thus emerging as a critical need, as is the creation of new materials that may permit a transition away from classic distillation-based separations. In this Perspective, we focus on porous organic cages and macrocycles that can adsorb guest molecules selectively through various host-guest interactions and permit molecular sieving behavior at the molecular level. Specifically, we summarize the recent advances where receptor-based adsorbent materials have been shown to be effective for industrially relevant hydrocarbon separations, highlighting the underlying host-guest interactions that impart selectivity and permit the observed separations. This approach to sustainable separations is currently in its infancy. Nevertheless, several receptor-based adsorbent materials with extrinsic/intrinsic voids or special functional groups have been reported in recent years that can selectively capture various targeted guest molecules. We believe that the understanding of the interactions that drive selectivity at a molecular level accruing from these initial systems will permit an ever-more-effective "bottom-up" design of tailored molecular sieves that, in due course, will allow adsorbent material-based approaches to separations to transition from the laboratory into an industrial setting.

A robust and ultra-high-surface hydrogen-bonded organic framework promoting high-efficiency solid phase microextraction of multiple persistent organic pollutants from beverage and tea

Persistent organic pollutants (POPs) are widely distributed in the environment and are toxic, even at low concentrations. In this study, we first used hydrogen-bonded organic framework (HOF) to enrich POPs, based on solid phase microextraction (SPME). The HOF called PFC-1 (self-assembled by 1,3,6,8-tetra(4-carboxylphenyl)pyrene) has an ultra-high specific surface area, excellent thermochemical stability, and abundant functional groups, making it potential to be an excellent coating in SPME. And the as-prepared PFC-1 fiber have demonstrated outstanding enrichment abilities for nitroaromatic compounds (NACs) and POPs. Furthermore, the PFC-1 fiber was coupled with gas chromatography-mass spectrometry (GC-MS) to develop an ultrasensitive and practical analytical method with wide linearity (0.2-200 ng·L^-1), low detection limits for organochlorine pesticides (OCPs) (0.070-0.082 ng·L^-1) and polychlorinated biphenyls (PCBs) (0.030-0.084 ng·L^-1), good repeatability (6.7-9.9%), and satisfactory reproducibility (4.1-8.2%). Trace concentrations of OCPs and PCBs in drinking water, tea beverage, and tea were also determined precisely with the proposed analytical method.

Synthesis and In Situ Monitoring of Mechanochemical Preparation of Highly Proton Conductive Hydrogen-Bonded Metal Phosphonates

Crystalline porous materials are recognized as promising proton conductors for the proton exchange membrane (PEM) in fuel cell technology owing to their tunable framework structure. However, it is still a challenging bulk synthesis for real-world applications of these materials. Herein, we report the mechanochemical gram-scale synthesis of two isostructural metal hydrogen-bonded organic frameworks (MHOFs) of Co(II) and Ni(II) based on 1-hydroxyethylidenediphosphonic acid (HEDPH₄) with 2,2'-bipyridine (2,2'-bipy): Co(HEDPH₃)₂(2,2'-bipy)·H₂O (1) and Ni(HEDPH₃)₂(2,2'-bipy)·H₂O (2). In situ monitoring of the mechanochemical synthesis using different synchrotron-based techniques revealed a one-step mechanism - the starting materials are directly converted to the product. With the existence of extensive hydrogen bonds with amphiprotic uncoordinated phosphonate hydroxyl and oxygen atoms, both frameworks exhibited proton conduction in the range of 10^-4 S cm^-1 at room temperature under humid conditions. This study demonstrates the potential of green mechanosynthesis for bulk material preparation of framework-based solid-state proton conductors.

An iron(III) complex-based supramolecular organic framework (SOF) as a theranostic platform via magnetic resonance imaging-guided chemotherapy

It is crucially important to explore the additional metal-endowed functions of supramolecular organic frameworks (SOFs) for expanding their applications. In this work we have reported the performance of a SOF (designated as Fe(III)-SOF) as a theranostic platform via magnetic resonance imaging (MRI)-guided chemotherapy. The Fe(III)-SOF may be used as an MRI contrast agent for cancer diagnosis because the building unit (iron complex) contains high spin iron(III) ions. Additionally, the Fe(III)-SOF may also be used as a drug carrier because it possesses stable internal voids. We loaded doxorubicin (DOX) into the Fe(III)-SOF to obtain a DOX@Fe(III)-SOF. The Fe(III)-SOF showed good loading content (16.3%) and high loading efficiency (65.2%) for DOX. Additionally, the DOX@Fe(III)-SOF had a relatively modest relaxivity value (r₂ = 19.745 mM^-1 s^-1) and exhibited the strongest negative contrast (darkest) at 12 h of post-injection. Furthermore, the DOX@Fe(III)-SOF effectively inhibited tumor growth and showed high anticancer efficiency. In addition, the Fe(III)-SOF was biocompatible and biosafe. Therefore, the Fe(III)-SOF was an excellent theranostic platform and may have potential applications in tumor diagnosis and treatment in the future. We believe that this work will initiate extensive research endeavors not only on the development of SOFs, but also on the construction of theranostic platforms based on SOFs.

Charge-Assisted Hydrogen-Bonded Organic Frameworks with Inorganic Ammonium Regulated Switchable Open Polar Sites

Surface open polar sites within the voids of porous molecular crystals define the localized physicochemical environment for critical functions such as gas separation and molecular recognition. This study presents a new charge-assisted hydrogen bonding (H-bonding) motif, by exploiting inorganic ammonium (NH₄ ⁺ ) cations as H-bond donors, to regulate the assembly of C₂ -symmetric carboxylic tectons for building robust H-bonded frameworks with permanent ultra-micropores and open oxygen sites. Diverse building blocks are bridged by tetrahedral NH₄ ⁺ to expand distinctive H-bonded networks with varied pore architectures. Particularly, the open polar oxygen sites can be switched by altering NH₄ ⁺ sources to tune the deprotonation of carboxyl-containing tectons. The activated porous PTBA·NH₄ ·DMF preserves the pore architecture and open polar oxygen sites, exhibiting remarkably selective sorption of CO₂ (107.8 cm³ g^-1 ,195 K) over N₂ (11.2 cm³ g^-1 , 77 K) and H₂ (1.4 cm³ g^-1 , 77 K).

Pure Silica with Ordered Silanols for Propylene/Propane Adsorptive Separation Unraveled by Three-Dimensional Electron Diffraction

Adsorptive separation of propylene (C₃H₆) from propane (C₃H₈), which could deal with energy-intensive cryogenic distillation technologies, remains challenging due to their similar physiochemical properties. Herein, we present a pure silica zeolite with ordered silanols (OSs), whose crystallographic structure was unraveled by the advanced three-dimensional electron diffraction (3D ED), displaying the highly efficient separation of propylene from propane under ambient conditions. The 3D ED technique enables us to investigate its 8-ring pore opening transformation from the round one to the elliptical one during the removal of organic structure-directing agents. Such unique elliptical 8-ring pore openings can exclude larger-size propane and only adsorb propylene. Its C₃H₆/C₃H₈ separation performance is also confirmed by column breakthrough experiments, showing a high dynamic adsorption capacity of 53.36 cm³ g^-1 for C₃H₆ but negligible C₃H₈ under ambient conditions. The dynamic capacity for C₃H₆ is superior to that of the well-known pure silica DDR-type zeolite (31.07 cm³ g^-1). The density functional theory calculation demonstrates that the adsorbed propylene is distributed in the heart-shaped cavity and has a weak interaction with the OSs.

Hybrid Hydrogen-Bonded Organic Frameworks: Structures and Functional Applications

As a new class of porous crystalline materials, hydrogen-bonded organic frameworks (HOFs) assembled from building blocks by hydrogen bonds have gained increasing attention. HOFs benefit from advantages including mild synthesis, easy purification, and good recyclability. However, some HOFs transform into unstable frameworks after desolvation, which hinders their further applications. Nowadays, the main challenges of developing HOFs lie in stability improvement, porosity establishment, and functionalization. Recently, more and more stable and permanently porous HOFs have been reported. Of all these design strategies, stronger charge-assisted hydrogen bonds and coordination bonds have been proven to be effective for developing stable, porous, and functional solids called hybrid HOFs, including ionic and metallized HOFs. This Review discusses the rational design synthesis principles of hybrid HOFs and their cutting-edge applications in selective inclusion, proton conduction, gas separation, catalysis and so forth.

2D Organic Materials: Status and Challenges

In the past few decades, 2D layer materials have gradually become a central focus in materials science owing to their uniquely layered structural qualities and good optoelectronic properties. However, in the development of 2D materials, several disadvantages, such as limited types of materials and the inability to synthesize large-scale materials, severely confine their application. Therefore, further exploration of new materials and preparation methods is necessary to meet technological developmental needs. Organic molecular materials have the advantage of being customizable. Therefore, if organic molecular and 2D materials are combined, the resulting 2D organic materials would have excellent optical and electrical properties. In addition, through this combination, the free design and large-scale synthesis of 2D materials can be realized in principle. Furthermore, 2D organic materials exhibit excellent properties and unique functionalities along with great potential for developing sensors, biomedicine, and electronics. In this review, 2D organic materials are divided into five categories. The preparation methods and material properties of each class of materials are also described in detail. Notably, to comprehensively understand each material's advantages, the latest research applications for each material are presented in detail and summarized. Finally, the future development and application prospects of 2D organic materials are briefly discussed.

A Silver-Based Integrated System Showing Mutually Inclusive Super Protonic Conductivity and Photoswitching Behavior

Photoinduced electricity and proton conductivity led fuel cells have emerged, inter alia, as highly promising systems for unconventional energy harvesting. Notwithstanding their individual presence with widely acclaimed results, an integrating system with mutually inclusive manifestation of both features has hitherto not been reported in the literature. To achieve this objective, our approach was to design a ligand system incorporating prerequisite features of both systems, like extended conjugation instigating photophysical activity and functional groups facilitating ionic conduction. As such, we report herein the design, synthesis, and characterization of a pyridyl-pyrazole-based silver compound that exhibits an excellent photocurrent generation and very high proton conductivity. The X-ray single-crystal structure of the Ag complex fully supports our notion, showing extensive π-π conjugated aromatic rings with a protruding free sulfonic group, facing toward solvent-filled channels with numerous supramolecular interactions. The nanoscopic silver metallogel induces semiconductive features in the system which ultimately result in photoresponse behavior in terms of photocurrent generation with an whopping photocurrent gain (I_on/I_off) of 21.2. To complete the idea of an integrated system, the proton conductivity values were also measured for both gel and crystalline states, while the former state yields a better result. The maximum proton conductivity value turns out to be 1.03 × 10^-2 S cm^-1 at 70 °C, which is higher than or comparable to those of well-known systems in the literature for proton conductivity.

Engineering HOF-Based Mixed-Matrix Membranes for Efficient CO2 Separation

Hydrogen-bonded organic frameworks (HOFs) have emerged as a new class of crystalline porous materials, and their application in membrane technology needs to be explored. Herein, for the first time, we demonstrated the utilization of HOF-based mixed-matrix membrane for CO2 separation. HOF-21, a unique metallo-hydrogen-bonded organic framework material, was designed and processed into nanofillers via amine modulator, uniformly dispersing with Pebax polymer. Featured with the mix-bonded framework, HOF-21 possessed moderate pore size of 0.35 nm and displayed excellent stability under humid feed gas. The chemical functions of multiple binding sites and continuous hydrogen-bonded network jointly facilitated the mass transport of CO2. The resulting HOF-21 mixed-matrix membrane exhibited a permeability above 750 Barrer, a selectivity of ~ 40 for CO2/CH4 and ~ 60 for CO2/N2, surpassing the 2008 Robeson upper bound. This work enlarges the family of mixed-matrix membranes and lays the foundation for HOF membrane development.

Bio-Inspired Synthetic Hydrogen-Bonded Organic Frameworks for Efficient Proton Conduction

Hydrogen-bonded organic frameworks (HOFs) are a rising class of promising proton-conducting materials. However, they always suffer from the inherent contradiction between chemical stability and proton conduction. Herein, inspired by the self-assembly of lipid bilayer membranes, a series of aminomethylphosphonic acid-derived single-component HOFs are successfully developed with different substituents attached to the phosphonate oxygen group. They remain highly stable in strong acid or alkaline water solutions for one month owing to the presence of charge-assisted hydrogen bonds. Interestingly, in the absence of external proton carriers, the methyl-substituted phosphonate-based HOF exhibits a very high proton conductivity of up to 4.2 × 10^-3  S cm^-1 under 80 °C and 98% relative humidity. This value is not only comparable to that of HOFs consisting of mixed ligands but also is the highest reported in single-component HOFs. A combination of single-crystal structure analysis and density functional theory calculations reveals that the high conductivity is attributed to the strengthened H-bonding interactions between positively charged amines and negatively charged phosphonate groups in the channel of bio-inspired HOFs. This finding demonstrates that the well-defined molecular structure of proton conductors is of great importance in the precise understanding of the relationship between structure and property.

Giant Water Uptake Enabled Ultrahigh Proton Conductivity of Graphdiyne Oxide

Proton conductors have attracted great attention in various fields, especially in energy production. Here, we find that graphdiyne oxide (GDYO), derived from graphdiyne (GDY), features the highest proton conductivity of 0.54 S cm^-1 (100 % RH, 348 K) among the oxidized carbon allotropes reported so far. The sp- and sp² -co-hybridized carbon skeleton of GDY enables GDYO with the giant water uptake, which is 2.4 times larger than that of graphene oxide (GO), resulting in ultrahigh proton conductivity by increasing the proton concentration and proton conduction pathways. This ultrahigh proton conductivity of GDYO is further proved in a methanol fuel cell by using GDYO membrane as proton exchange membrane. The GDYO membrane enables the cell with higher open circuit voltage, larger power density and lower methanol permeability, compared with commercial Nafion 117. Moreover, the GDYO membrane bears high ion exchange capacity, good acidic stability and low swelling ratio.

Electronic Effect-Modulated Enhancements of Proton Conductivity in Porous Organic Polymers

We proposed a new strategy to maximize the density of acidic groups by modulating the electronic effects of the substituents for high-performance proton conductors. The conductivity of the sulfonated 1-MeL40-S with methyl group corresponds to 2.29×10^-1  S cm^-1 at 80 °C and 90 % relative humidity, remarkably an 22100-fold enhancement over the nonsulfonated 1-MeL40. 1-MeL40-S maintains long-term conductivity for one month. We confirm that this synthetic method is generalized to the extended version POPs, 2-MeL40-S and 3-MeL40-S. In particular, the conductivities of the POPs compete with those of top-level porous organic conductors. Moreover, the activation energy of the POPs is lower than that of the top-performing materials. This study demonstrates that systematic alteration of the electronic effects of substituents is a useful route to improve the conductivity and long-term durability of proton-conducting materials.

Multifunctional Porous Hydrogen-Bonded Organic Frameworks: Current Status and Future Perspectives

Hydrogen-bonded organic frameworks (HOFs), self-assembled from organic or metalated organic building blocks (also termed as tectons) by hydrogen bonding, π-π stacking, and other intermolecular interactions, have become an emerging class of multifunctional porous materials. So far, a library of HOFs with high porosity has been synthesized based on versatile tectons and supramolecular synthons. Benefiting from the flexibility and reversibility of H-bonds, HOFs feature high structural flexibility, mild synthetic reaction, excellent solution processability, facile healing, easy regeneration, and good recyclability. However, the flexible and reversible nature of H-bonds makes most HOFs suffer from poor structural designability and low framework stability. In this Outlook, we first describe the development and structural features of HOFs and summarize the design principles of HOFs and strategies to enhance their stability. Second, we highlight the state-of-the-art development of HOFs for diverse applications, including gas storage and separation, heterogeneous catalysis, biological applications, sensing, proton conduction, and other applications. Finally, current challenges and future perspectives are discussed.

Exploring Multifunctional Hydrogen-Bonded Organic Framework Materials

Hydrogen-bonded organic framework (HOF) materials have provided a new dimension and bright promise as a new platform for developing multifunctional materials. They can be readily self-assembled from their corresponding organic molecules with diverse functional sites such as carboxylic acid and amine groups for their hydrogen bonding and aromatic ones for their weak π···π interactions to stabilize the frameworks. Compared with those established porous materials such as zeolites, metal-organic frameworks (MOFs), and covalent-organic frameworks (COFs), it is much more difficult to stabilize HOFs and thus establish their permanent porosities given the fact that hydrogen bonds are typically weaker than ionic, coordination, and covalent bonds. But it provides the uniqueness of HOF materials in which they can be easily recovered and regenerated through simple recrystallization. HOF materials can also be easily and straightforwardly processed and very compatible with the biomolecules, making them potentially very useful materials for industrial and biomedical applications. The reversible and weak bonding nature of the hydrogen bonds can be readily utilized to construct flexible porous HOF materials in which we can tune the temperature and pressure to control their porosities and, thus, their diverse applications, for example, on gas separations, gas storage, drug delivery, and sensing. Some specific organic functional groups are quite directional for the hydrogen bond formations; for example, carboxylic acid prefers to form a directional dimer, which has enabled us to readily construct reticular porous HOF materials whose pores can be systematically tuned. In this Account, we outline our journey of exploring this new type of porous material by establishing one of the first porous HOFs in 2011 and thus developing its diverse applications. We have been able to use organic molecules with different functional sites, including 2,4-diaminotriazine (DAT), carboxylic acid (COOH), aldehyde (CHO), and cyano (CN), to construct porous HOFs. Through tuning the pore sizes, introducing specific binding sites, and making use of the framework flexibility, we have realized a series of HOF materials for the gas separations of C₂H₂/C₂H₄, C₂H₄/C₂H₆, C₃H₆/C₃H₈, C₂H₂/CO₂, CO₂/N₂, and Xe/Kr and enantioselective separation of alcohols. To make use of optically active organic molecules, we have developed HOF materials for their luminescent sensing and optical lasing. Our research endeavors on multifunctional HOF materials have initiated extensive research in this emerging research topic among chemistry and materials sciences communities. We foresee that not only many more HOF materials will be developed but novel functions will be fulfilled beyond our imaginations soon.

Multi-Responsive Sensor Based on Porous Hydrogen-Bonded Organic Frameworks for Selective Sensing of Ions and Dopamine Molecules

Hydrogen-bonded organic frameworks (HOFs), as an emerging porous material, have attracted increasing research interest in fluorescence sensing due to their inherent fluorescence emission units with unique physicochemical properties. Herein, based on the organic building block 3,3',5,5'-tetrakis-(4-carboxyphenyl)-1,1'-biphenyl (H₄TCBP), the porous material HOF-TCBP was successfully synthesized using hydrogen bond self-assembly in a DMF solution. The fluorescence properties of the HOF-TCBP solution showed that when the concentration was high, excimers were easily formed, the PL emission was red-shifted, and the fluorescence intensity became weaker. HOF-TCBP showed good sensitivity and selectivity to metal ions Fe³⁺, Cr³⁺, and anion Cr₂O₇^2-. In addition, HOF-TCBP can serve as a label-free fluorescent sensor material for the sensitive and selective detection of dopamine (DA). HOF-based DA sensing is actually easy, low-cost, simple to operate, and highly selective for many potential interfering substances, and it has been successfully applied to the detection of DA in biological samples with satisfactory recoveries (101.1-104.9%). To our knowledge, this is the first report of HOF materials for efficient detection of the neurotransmitter dopamine in biological fluids. In short, this work widely broadens the application of HOF materials as fluorescent sensors for the sensing of ions and biological disease markers.

Hydrogen Bond Activation by Pyridinic Nitrogen for the High Proton Conductivity of Covalent Triazine Framework Loaded with H3 PO4

Under high temperature anhydrous conditions, it is still a formidable challenge to improve the performance of proton-conducting materials based on H₃ PO₄ and elucidate its proton conduction mechanism. Herein, a highly stable covalent triazine frameworks (CTFs) based on H₃ PO₄ is reported. The more pyridinic nitrogen CTFs contain, the higher proton conductivity is. Compared with H₃ PO₄ @CTF-L with less pyridinic nitrogen, H₃ PO₄ @CTF-H has a higher proton conductivity of 1.6×10^-1  S cm^-1 at 150 °C under anhydrous conditions, which does not decay after about 18 months exposure in air. The high proton conductivity is associated with the formation and breaking of the activated N_triazine ⋯H⁺ ⋯H₂ PO₄ ^- pairs by pyridinic nitrogen of CTFs. The outstanding long-term stability is mainly attributed to the ultra-strong triazine skeleton structure of CTFs.

Hydrogen-Bonded Organic Frameworks: Structural Design and Emerging Applications

Constructing well-organized organic frameworks with tailor-made functionalities potentially boost multi-domain applications. Hydrogen bonding (H-bonding) is a category of general and weak intermolecular interactions when compared with covalent bonding or metal-ligand coordination. Porous frameworks mainly assembled by H-bonding (named hydrogen-bonded organic frameworks, HOFs) are intrinsically capable of decomposing and regenerating, a distinctive advantage to improve their processability while expanding the applicability. This paper summarizes the basic building concepts of HOFs, including feasible hydrogen bonded motifs, effective molecular structures, and their emerging applications.

In Situ Assembly of Hydrogen-Bonded Organic Framework on Metal-Organic Framework: An Effective Strategy for Constructing Core-Shell Hybrid Photocatalyst

The hydrogen-bonded organic frameworks (HOFs) have rarely been considered for photocatalytic application, given their weak stability and low activity. One presumably effective strategy to improve the photocatalytic performance of the HOFs is to produce a core-shell composite by fabricating a particular nanostructure using stable HOFs. To this end, the surface-functionalized metal-organic frameworks (MOFs) are used as the host matrix to support the in situ assembly and subsequent multisite growth of the stable HOFs. MOF@HOF eventually obtains core-shell hybrids, i.e., NH₂ -UiO-66@DAT-HOF. This newly synthesized core-shell nanostructure exhibits excellent stability and superb photocatalytic performance. For example, in terms of tetracycline degradation, the optimal composite presents an apparent reaction rate constant of 60.7 and 7.6 times higher than its parent materials NH₂ -UiO-66 and DAT-HOF. Such a pronounced enhancement in photocatalytic efficiency of the hybrid material is attributed to the broader visible-light utilization range compared to its individual parent material as well as the efficient separation of charge carriers supported by the S-scheme heterojunction. In addition, it is particularly notable that the photocatalytic efficiency of the yielded core-shell nanostructure can remain high after several-cycle applications. This work provides a universal scheme for synthesizing the MOF@HOF core-shell hybrids.