Wearable Thermocells Based on Gel Electrolytes for the Utilization of Body Heat

Recent advances in moisture-induced electricity generation based on wood lignocellulose: Preparation, properties, and applications

Moisture-induced electricity generation (MEG), which can directly harvest electricity from moisture, is considered as an effective strategy for alleviating the growing energy crisis. Recently, tremendous efforts have been devoted to developing MEG active materials from wood lignocellulose (WLC) due to its excellent properties including environmental friendliness, sustainability, and biodegradability. This review comprehensively summarizes the recent advances in MEG based on WLC (wood, cellulose, lignin, and woody biochar), covering its principles, preparation, performances, and applications. In detail, the basic working mechanisms of MEG are discussed, and the natural features of WLC and their significant advantages in the fabrication of MEG active materials are emphasized. Furthermore, the recent advances in WLC-based MEG for harvesting electrical energy from moisture are specifically discussed, together with their potential applications (sensors and power sources). Finally, the main challenges of current WLC-based MEG are presented, as well as the potential solutions or directions to develop highly efficient MEG from WLC.

N-type and P-type series integrated hydrogel thermoelectric cells for low-grade heat harvesting

Low-grade heat is abundant and ubiquitous, but it is generally discarded due to the lack of cost-effective recovery technologies. Ion thermoelectric cells are an affordable and straightforward approach of converting low-grade heat into usable electricity for sustainable power. Despite their potential, ion thermoelectric cells face challenges such as limited Seebeck coefficient and required series integration. Here, we demonstrate that the N-type and P-type conversion of ion thermoelectric cells can be achieved through the phase transition of temperature-sensitive hydrogel containing the triiodide/iodide redox couple. Through the strong interaction between the hydrophobic region of the hydrogel and triiodide, the hydrophobic side selectively captures triiodide and the hydrophilic side repels triiodide, raising the concentration difference of triiodide and thereby increasing the Seebeck coefficient. Specifically, the Seebeck coefficient of the N-type ion thermoelectric cells is 7.7 mV K-1, and the Seebeck coefficient of P-type ion thermoelectric cells is -6.3 mV K-1 (ΔT = 15 K). By connecting 10 pairs of the N-type and P-type ion thermoelectric cells, we achieve a voltage of 1.8 V and an output power of 85 μW, surpassing the reported triiodide/iodide-based ion thermoelectric cells. Our work proposes a phase transition strategy for the N-P conversion of ion thermoelectric cells, and highlights the prospect of series integrated hydrogel ion thermoelectric cells for low-grade heat harvesting.

High-performance, breathable and flame-retardant moist-electric generator based on asymmetrical nanofiber membrane assembly

Moist-electric generators (MEGs), which are capable of spontaneously generating energy from ubiquitous moisture, are considered as a potential power supply candidate for wearable electronics. However, the application of the MEGs in the wearable field is still challenging due to the low electric output and the lack of wearable attributes such as breathability and flame retardancy. Herein, we demonstrated a wearable MEG with high power-output, breathability and flame retardancy, which was fabricated by designing an asymmetrical nanofiber assembly using hydrophilic polyvinyl alcohol/phytic acid (PVA/PA) and hydrophobic polyvinylidene difluoride (PVDF) nanofiber membranes. Owing to the synergistic effects of strong water absorption, enhanced ion release and numerous micro-nano transport channels, a single MEG of 1 cm2 could constantly generate high direct-current (DC) power, i.e., a voltage of 1.0 V, a current of 15.5 μA, and a power density of 3.0 μW cm-2, outperforming other reported nanofiber-based MEGs. More importantly, the asymmetric nanofiber structure ensured the moisture circulation inside MEG and thus produced a sustained voltage output for 7 days without any deterioration. The MEG also showed good flexibility, air/moisture permeability and flame retardancy, which give it necessary wearable attributes. Furthermore, large-scale integration of MEG units could be readily realized to fabricate a power source device for driving different portable electronics, while the moisture sensitivity made the MEG well used for sensing applications (e.g., respiration monitoring, fire warning).

Machine Learning Assisted Self-Powered Identity Recognition Based on Thermogalvanic Hydrogel for Intelligent Security

Identity recognition as the first barrier of intelligent security plays a vital role, which is facing new challenges that are unable to meet the need of intelligent era due to low accuracy, complex configuration and dependence on power supply. Here, a finger temperature-driven intelligent identity recognition strategy is presented based on a thermogalvanic hydrogel (TGH) by actively discerning biometric characteristics of fingers. The TGH is a dual network PVA/Agar hydrogel in an H2O/glycerol binary solvent with [Fe(CN)6]3-/4- as a redox couple. Using a concave-arranged TGH array, the characteristics of users can be distinguished adequately even under an open environment by extracting self-existent intrinsic temperature features from five typical sites of fingers. Combined with machine learning, the TGH array can recognize different users with a high average accuracy of 97.6%. This self-powered identity recognition strategy is further applied to a smart lock, attaining a more reliable security protection from biometric characteristics than bare passwords. This work provides a promising solution for achieving better identity recognition, which has great advantages in intelligent security and human-machine interaction toward future Internet of everything.

Ultrastrong, flexible thermogalvanic armor with a Carnot-relative efficiency over 8

Body heat, a clean and ubiquitous energy source, is promising as a renewable resource to supply wearable electronics. Emerging tough thermogalvanic device could be a sustainable platform to convert body heat energy into electricity for powering wearable electronics if its Carnot-relative efficiency (ηr) reaches ~5%. However, maximizing both the ηr and mechanical strength of the device are mutually exclusive. Here, we develop a rational strategy to construct a flexible thermogalvanic armor (FTGA) with a ηr over 8% near room temperature, yet preserving mechanical robustness. The key to our design lies in simultaneously realizing the thermosensitive-crystallization and salting-out effect in the elaborately designed ion-transport highway to boost ηr and improve mechanical strength. The FTGA achieves an ultrahigh ηr of 8.53%, coupling with impressive mechanical toughness of 70.65 MJ m-3 and substantial elongation (~900%) together. Our strategy holds sustainable potential for harvesting body heat and powering wearable electronics without recharging.

Recurrently gellable and thermochromic inorganic hydrogel thermogalvanic cells

Thermogalvanic cells (TGCs) draw great attention in the field of heat to electricity conversion, but TGCs were only in the form of liquid or organic gel. Here, we report an all-inorganic hydrogel TGC via simply mixing and stirring two inorganic salt solutions. Benefiting from the hydrogen bonds resultant framework and endogenous Fe2+/3+ redox couple, the TGC can recurrently pulverize-gel with completely holding its initial thermogalvanic performances after even 60 cycles. As the temperature and pH coregulating Fe3+ concentration and reversible transformation between Fe3+ and Fe(OH)3, we boost thermopower and realize thermochromism. This work provides a different perspective for TGCs and offers an avenue for future hydrogel materials research.

Chaotropic Effect-Boosted Thermogalvanic Ionogel Thermocells for All-Weather Power Generation

Ionic thermocells convert heat into electricity and are promising power sources for electronic devices. However, discontinuous and small electricity output limits practical use under varying environmental conditions. Here, a thermogalvanic ionogel with a high Seebeck coefficient (32.4 mV K-1) is designed. Thermocells that combine thermogalvanic ionogel-based thermocells, which realize all-weather power generation via passive radiative cooling, are also developed. These thermocells generate electricity continuously under varying weather conditions and over a wide temperature range (-40 to 90 °C), with a normalized power density of 25.84 mW m-2 K-2. Advanced characterization shows that the chaotropic effect enhances the Seebeck coefficient, while the self-supplying temperature difference given the radiative cooling structure enables all-weather power generation. These results provide an effective strategy for developing practical thermocells suitable for diverse daily and seasonal variations.

Thermoelectric Hydrogel Electronic Skin for Passive Multimodal Physiological Perception

Electronic skins (e-skins) are being extensively researched for their ability to recognize physiological data and deliver feedback via electrical signals. However, their wide range of applications is frequently restricted by the indispensableness of external power supplies and single sensory function. Here, we report a passive multimodal e-skin for real-time human health assessment based on a thermoelectric hydrogel. The hydrogel network consists of poly(vinyl alcohol)/low acyl gellan gum with [Fe(CN)6]4-/3- as the redox couple. The introduction of glycerol and Li+ furnishes the gel-based e-skin with antidrying and antifreezing properties, a thermopower of 2.04 mV K-1, fast self-healing in less than 10 min, and high conductivity of 2.56 S m-1. As a prospective application, the e-skin can actively perceive multimodal physiological signals without the need for decoupling, including body temperature, pulse rate, and sweat content, in real time by synergistically coupling sensing and transduction. This work offers a scientific basis and designs an approach to develop passive multimodal e-skins and promotes the application of wearable electronics in advanced intelligent medicine.

Flexible thermoelectric CMTs/KCl/gelatin composite for a wearable pressure and temperature sensor

Flexible sensors have promising applications in the fields of health monitoring and artificial intelligence, which have attracted much attention from researchers. However, the design and manufacture of sensors with multiple sensing functions (like simultaneously having both temperature and pressure sensing capabilities) still present a significant challenge. Here, an ionic thermoelectric sensor for synchronous temperature and pressure sensing was developed on the basis of a carbon microtubes (CMTs)/potassium chloride (KCl)/gelatin composite consisting of gelatin as the polymer matrix, CMTs as the conductive material and KCl as the ion source. The designed CMTs/KCl/gelatin composite with the good ductility (830%) and flexibility can achieve a Seebeck coefficient of 4 mV K-1 and a dual stimulus responsiveness to pressure and temperature. In addition, not only the movement of the human body (e.g., fingers, arms), but also the temperature difference between the human body and the environment, were able to be monitored by the designed CMTs/KCl/gelatin sensors. This study provides a novel strategy for the design and preparation of high-performance flexible sensors by utilizing ion-gel thermoelectric materials and promotes the research of temperature and pressure sensing technologies.

High-performance cryo-temperature ionic thermoelectric liquid cell developed through a eutectic solvent strategy

Ionic thermoelectric (i-TE) liquid cells offer an environmentally friendly, cost effective, and easy-operation route to low-grade heat recovery. However, the lowest temperature is limited by the freezing temperature of the aqueous electrolyte. Applying a eutectic solvent strategy, we fabricate a high-performance cryo-temperature i-TE liquid cell. Formamide is used as a chaotic organic solvent that destroys the hydrogen bond network between water molecules, forming a deep eutectic solvent that enables the cell to operate near cryo temperatures (down to -35 °C). After synergistic optimization of the electrode and cell structure, the as-fabricated liquid i-TE cell with cold (-35 °C) and hot (70 °C) ends achieve a high power density (17.5 W m-2) and a large two-hour energy density (27 kJ m-2). In a prototype 25-cell module, the open-circuit voltage and short-circuit current are 6.9 V and 68 mA, respectively, and the maximum power is 131 mW. The anti-freezing ability and high output performance of the as-fabricated i-TE liquid cell system are requisites for applications in frigid regions.

Design and Optimization Strategies for Flexible Quasi-Solid-State Thermo-Electrochemical Cells

Currently, efficient utilization of low-grade thermal energy is a great challenge. Thermoelectricity is an extremely promising method of generating electrical energy from temperature differences. As a green energy conversion technology, thermo-electrochemical cells (TECs) have attracted much attention in recent years for their ability to convert thermal energy directly into electricity with high thermal power. Within TECs, anions and cations gain and lose electrons, respectively, at the electrodes, using the potential difference between the hot and cold terminals of the electrodes by redox couples. Additionally, the anions and cations therein are constantly circulating and mobile via concentration diffusion and thermal diffusion, providing an uninterrupted supply of power to the exterior. This review article focuses mainly on the operation of TECs and recent advances in redox couples, electrolytes, and electrodes. The outlook for optimization strategies regarding TECs is also outlined in this paper.

Gigantic and Continuous Output Power in Ionic Thermo-Electrochemical Cells by Using Electrodes with Redox Couples

The main obstacle of ionic thermo-electrochemical cells (TECs) in continuous power supply lies in a low heat-to-electricity energy conversion efficiency because most TECs work in thermodiffusion mode in which the ions are confined in a liquid/electrolyte media. The introduction of the redox couple onto the electrode surface may overcome the obstacle by resolving the low mass transport rate of ions caused by the redox process occurring near but not on the electrode surface. Herein, the authors demonstrate enhancement of TECs by integrating the redox couple directly onto the electrode surface to maximize the mass transport efficiency. A discontinuous interfacial modification strategy is developed by using a carbon cloth/iron (II/III) phytate as the symmetric electrodes. The gelled electrolyte consisting of a polyacrylamide matrix and phytic acid is shown to promote selective ion diffusion. A synergistic combination consisting of the thermodiffusion effect and redox reactions on the electrode is established in a pre-treated layout. Such TEC affords a high output voltage of 0.4 V, an excellent instantaneous output power density (20.26 mW m-2 K-2 ) and a record-high 2 h output energy density (2451 J m-2 ) under TH = 30 °C with TC = 15 °C, with an ultrahigh Carnot-relative efficiency of 1.12%.

Proton-Coupled Electron Transfer Aided Thermoelectric Energy Conversion and Storage

Low-grade heat is ubiquitous in the environment and its thermoelectric conversion by the ionic conductors remains a challenge because of the low efficiency and poor sustainability. Here we demonstrate that the thermoelectric performances can be boosted by combining the Soret effect of protons and proton-coupled electron transfer (PCET) reaction of benzoquinone and hydroquinone in hydrogels. An overall enhancement of thermopower (25.9 mV K-1 ), power factor (5 mW m-1  K-2 ), figure of merit (>2.4) and continuity of power output is achieved. Moreover, an energy-storage function can be achieved by the redox couple, and a retained power output of 27.7 %, or 14 mW m-2 for more than 3 hours is obtained by the re-balance of PCET reactants in the hydrogel after the removal of the temperature gradient.

Highly robust and sensitive dual-network freeze-resistant organic hydrogel thermocells

Thermocells (TECs) are eco-friendly and ideal power-generation devices that sustainably convert waste heat into electricity to power wearable electronics. However, their poor mechanical properties, limited operating temperature, and low sensitivity limit their practical application. Hence, K_3/4Fe(CN)₆ and NaCl thermoelectric materials were introduced into a bacterial cellulose-reinforced polyacrylic acid double-network structure and permeated into a glycerol (Gly)/water binary solvent to prepare an organic thermoelectric hydrogel. The resulting hydrogel had a tensile strength of approximately 0.9 MPa and a stretched length of approximately 410 %; moreover, it worked stably even in the stretched/twisted state. Owing to the introduction of Gly and NaCl, the as-prepared hydrogel exhibited excellent freezing tolerance (- 22 °C). In addition, the TEC also demonstrated excellent sensitivity (~13 s). Good environmental stability and high sensitivity make this hydrogel TEC a promising candidate for thermoelectric power-generation/temperature-monitoring systems.

Swift Assembly of Adaptive Thermocell Arrays for Device-Level Healable and Energy-Autonomous Motion Sensors

The evolution of wearable technology has prompted the need for adaptive, self-healable, and energy-autonomous energy devices. This study innovatively addresses this challenge by introducing an MXene-boosted hydrogel electrolyte, which expedites the assembly process of flexible thermocell (TEC) arrays and thus circumvents the complicated fabrication of typical wearable electronics. Our findings underscore the hydrogel electrolyte's superior thermoelectrochemical performance under substantial deformations and repeated self-healing cycles. The resulting hydrogel-based TEC yields a maximum power output of 1032.1 nW under the ΔT of 20 K when being stretched to 500% for 1000 cycles, corresponding to 80% of its initial state; meanwhile, it sustains 1179.1 nW under the ΔT of 20 K even after 60 cut-healing cycles, approximately 92% of its initial state. The as-assembled TEC array exhibits device-level self-healing capability and high adaptability to human body. It is readily applied for touch-based encrypted communication where distinct voltage signals can be converted into alphabet letters; it is also employed as a self-powered sensor to in-situ monitor a variety of body motions for complex human actions. The swift assembly approach, combined with the versatile functionality of the TEC device, paves the way for future advancements in wearable electronics targeting at fitness monitoring and human-machine interfaces.

MXene and Carbon-Based Electrodes of Thermocells for Continuous Thermal Energy Harvest

Low-grade heat represents a significant form of energy loss; thermocells (TECs) utilizing the thermogalvanic effect can convert thermal energy into electricity without generating vibrations, noise, or waste emissions, making them a promising energy conversion technology for efficiently harvesting low-grade heat. Despite recent advancements, the reliance on high-cost platinum electrodes in TECs has considerably hindered their widespread adoption. Developing cost-effective electrodes that maintain the same thermoelectrochemical performance is crucial for the successful application of TECs. In this review article, the exploration of MXene materials as TEC electrodes is discussed first, emphasizing the immense potential of the MXene family for low-grade heat harvesting applications. Next, recent research on carbon-based electrodes is summarized, and morphological and structural optimizations are comprehensively discussed aiming at enhancing the thermoelectrochemical performance of TECs. In the concluding section, the challenges are outlined and future perspectives are offered, which provide valuable insights into the ongoing development of high-performance TEC electrodes using MXene and carbon-based materials.

Strong Tough Thermogalvanic Hydrogel Thermocell With Extraordinarily High Thermoelectric Performance

Thermocells can continuously convert heat into electricity, and they are widely used to power wearable electronic devices. However, they have a risk of leakage and poor mechanical properties. Although quasi-solid ionic thermocells can overcome the issue of electrolyte leakage, the trade-off between their excellent mechanical properties and high thermopower remains a major challenge. In this study, stretching-induced crystallization and the thermoelectric effect are combined to propose a high-strength quasi-solid stretchable polyvinyl alcohol thermogalvanic thermocell (SPTC) with a large tensile strength of 19 MPa and high thermopower of 6.5 mV K-1 . The SPTC exhibits a high stretchability of 1300%, ultrahigh toughness of 163.4 MJ m-3 , and high specific output power density of 1969 µW m-2  K-2 . These comprehensive properties are superior to those of previously reported quasi-solid stretchable thermogalvanic thermocells. The use of SPTC-based systems in wearable devices for energy-autonomous strain sensors and health monitoring is demonstrated. This can facilitate the rapid implementation of sustainable wearable electronics in the Internet of Things era.

High-Performance Isotropic Thermo-Electrochemical Cells Using Agar-Gelled Ferricyanide/Ferrocyanide/Guanidinium

An isotropic thermo-electrochemical cell is introduced with a high Seebeck coefficient (S _e) of 3.3 mV K^-1 that uses a ferricyanide/ferrocyanide/guanidinium-based agar-gelated electrolyte. A power density of about 20 µW cm^-2 is achieved at a temperature difference of about 10 K, regardless of whether the heat source is on the top or bottom section of the cell. This behavior is very different from that of cells with liquid electrolytes, which exhibit high anisotropy, and for which high S _e values are achieved only by heating the bottom electrode. The guanidinium-containing gelatinized cell does not exhibit steady-state operation, but its performance recovers when disconnected from the external load, suggesting that the observed power drop under load conditions is not due to device degeneration. The large S _e value and isotropic properties can mean that the novel system represents a major advancement from the standpoint of harvesting of low-temperature heat, such as body heat and solar thermal heat.

A Novel Gel Thermoelectric Chemical Cell for Harvesting Low-Grade Heat Energy

The use of gel thermoelectric chemical cells to capture low-grade heat for conversion to electricity is an attractive approach. However, there are few studies on whether the distribution of redox species in the electrolyte has an effect on the performance of cells. Herein, this concern was discussed by constructing a novel gel thermoelectric chemical cell (Cu-C-cg). Using cellulose-like rice paper as a separator, a concentration gradient of electrolyte was carefully constructed, so that the concentration of potassium ferrocyanide gradually decreased from the hot electrode to the cold electrode while the concentration of potassium ferricyanide gradually increased. Through electrochemical measurement and analysis, it was found that the thermoelectric performance of this cell outperformed the cell without electrolyte concentration gradients. Meanwhile, this performance could be enhanced by the use of asymmetric electrodes composed of copper foil and carbon electrodes. After optimizing the conditions, the open-circuit voltage, output power, and Seebeck coefficient of the Cu-C-cg cell at 12 K temperature difference were 0.450 V, 183 μW, and 7.82 mV K^-1 , respectively. This work not only provides a novel idea in gel-based cell design but also an excellent thermoelectric chemical cell.

Advancement of Electrochemical Thermoelectric Conversion with Molecular Technology

Thermocells are a thermoelectric conversion technology that utilizes the shift in an electrochemical equilibrium arising from a temperature difference. This technology has a long history; however, its low conversion efficiency impedes its practical usage. Recently, an increasing number of reports have shown drastic improvements in thermoelectric conversion efficiency, and thermocells could arguably represent an alternative to solid thermoelectric devices. In this Minireview, we regard thermocells as molecular systems consisting of successive molecular processes responding to a temperature change to achieve energy generation. Various molecular technologies have been applied to thermocells in recent years, and could stimulate diverse research fields, including supramolecular chemistry, physical chemistry, electrochemistry, and solid-state ionics. These research approaches will also provide novel methods for achieving a sustainable society in the future.

Low-Grade Thermal Energy Harvesting and Self-Powered Sensing Based on Thermogalvanic Hydrogels

Thermoelectric cells (TEC) directly convert heat into electricity via the Seebeck effect. Known as one TEC, thermogalvanic hydrogels are promising for harvesting low-grade thermal energy for sustainable energy production. In recent years, research on thermogalvanic hydrogels has increased dramatically due to their capacity to continuously convert heat into electricity with or without consuming the material. Until recently, the commercial viability of thermogalvanic hydrogels was limited by their low power output and the difficulty of packaging. In this review, we summarize the advances in electrode materials, redox pairs, polymer network integration approaches, and applications of thermogalvanic hydrogels. Then, we highlight the key challenges, that is, low-cost preparation, high thermoelectric power, long-time stable operation of thermogalvanic hydrogels, and broader applications in heat harvesting and thermoelectric sensing.

Thermoelectric energy harvesting for personalized healthcare

In recent decades, there has been increased research interest in miniaturizing and decentralizing diagnostic platforms to enable continuous personalized healthcare and free patients from long-term hospitalization. However, the lack of reliable and portable power supplies has limited the working time of the personalized healthcare platform. Compared with the current power supplies (e.g., batteries and supercapacitors) that require manual intervention, thermoelectric devices promise to continuously harvest waste heat from the human body to satisfy the energy consumption of personalized healthcare platforms. Herein, this review discusses thermoelectric energy harvesting for personalized healthcare. It begins with the fundamental concepts of different thermoelectric materials, including electron thermoelectric generators (TEGs), ionic thermogalvanic cells (TGCs), and ionic thermoelectric capacitors (TECs). Then, the wearable and implantable applications of thermoelectric devices are presented. Finally, future directions of next-generation thermoelectric devices for personalized healthcare are discussed. It is hoped that developing high-performance thermoelectric devices will change the landscape of personalized healthcare in the future.

Self-Powered Respiratory Monitoring Strategy Based on Adaptive Dual-Network Thermogalvanic Hydrogels

As a low-grade sustainable heat source, the breath waste heat exhaled by human bodies is always ignored, although producing a greater temperature than ambient. Converting this heat into electric energy for use as power sources or detecting signals is extremely important in cutting-edge wearable medicine. This heat-to-electricity conversion is possible with thermogalvanic hydrogels. However, challenges remain in their antifreezing and antidrying properties, significantly restricting the durability of thermogalvanic gels in practical applications. Herein, a dual-network poly(vinyl alcohol)/gelatin (PVA/GEL) gel thermogalvanic device with Fe(CN)₆^3-/4- as a redox pair is developed, with an outstanding low-temperature durability and antidrying capacity. These features result from the use of a binary H₂O/GL (glycerin) solvent to limit hydrogen bonding between water molecules. The prepared thermogalvanic gel patch is capable of easily converting physiological data into understandable electrical impulses using the temperature difference between the ambient environment and the heat produced by human breathing, realizing a simple self-powered respiratory monitoring strategy for the first time. Even below zero temperature, the gel patch-based mask can operate normally, implying it fits into low-temperature environments. This study sheds fresh light on the development of active wearable medical electronics that are powered by demic low-level heat.

Stretchable and Self-Powered Temperature-Pressure Dual Sensing Ionic Skins Based on Thermogalvanic Hydrogels

Tactile sensors with both temperature- and pressure-responsive capabilities are critical to enabling future smart artificial intelligence. These sensors can mimic haptic functions of human skin and inevitably suffer from tensile deformation during operation. However, almost all actual multifunctional tactile sensors are either nonstretchable or the sensing signals interfere with each other when stretched. Herein, we propose a stretchable and self-powered temperature-pressure dual functional sensor based on thermogalvanic hydrogels. The sensor operates properly under stretching, which relies on the thermogalvanic effect and constant elastic modulus of hydrogels. The thermogalvanic hydrogel elastomer exhibits an equivalent Seebeck coefficient of -1.21 mV K^-1 and a pressure sensitivity of 0.056 kPa^-1. Combined with unit array integration, the multifunctional sensor can be used for accurately recording tactile information on human skin and spatial perception. This work provides a conceptual framework and systematic design for stretchable artificial skin, interactive wearables, and smart robots.

Multi-ionic Hydrogel with outstanding heat-to-electrical performance for low-grade heat harvesting

Ionic thermoelectric (i-TE) materials have attracted much attention due to their ability to generate ionic Seebeck coefficient of tens of millivolts per Kelvin. In this work, we demonstrate that the ionic thermopower can be enhanced by the introduction of multiple ions. The multi-ionic hydrogel possesses a record thermal-to-electrical energy conversion factor (TtoE factor) of 89.6 mV K-1 and an ionic conductivity of 6.8 mS cm-1, which are both better than single salt contact hydrogel. Subsequently we build a model to explain thermal diffusion of the ions in multi-ionic hydrogels. Finally, the possibility of large-scale integrated applications of multi-ionic hydrogels is demonstrated. By connecting 7 i-TEs hydrogels, we obtained an open-circuit voltage of 1.86 V at ΔT = 3 K. Our work provides a new pathway for the design of i-TEs and low-grade heat harvesting.

Thermoelectrochemical Seebeck coefficient and viscosity of Co-complex electrolytes rationalized by the Einstein relation, Jones-Dole B coefficient, and quantum-chemical calculations

The Seebeck coefficient (Se) and the viscosity of a redox electrolyte are the key characteristics of thermoelectrochemical cells that generate electric power from waste thermal energy. However, the recent upsurge of research in this field is seriously disconnected from the knowledge of solution chemistry explored in the previous century. Herein, we systematically investigate five redox couples of cobalt complexes containing different aromatic ligands and anions in γ-butyrolactone solvent to demonstrate how the Einstein relation of hydrodynamic theory and the Jones-Dole B coefficient obtained from viscosity measurements can be used to account for such electrolyte properties. In essence, we reveal that the outer-shell (solvent reorganization) and inner-shell (metal-ligand reorganization) contributions to the redox reaction entropy ΔS_rc (∝Se) can be quantified by the analyses using the B-coefficients and quantum-chemical simulations, respectively, while the distinct regimes found in the viscosity and conductivity are well accounted for by the Einstein relation, despite its classical hydrodynamic origin.

Structural Design of Nanowire Wearable Stretchable Thermoelectric Generator

Wearable thermoelectric generators as renewable energy conversion technologies have witnessed rapid development in the past decade. Herein, we design a nanowire (NW) film wavy structure which possesses an excellent temperature gradient ratio for stretchable thermoelectric generators. Taking advantage of the photothermal effect of Te NWs as the hot side and p-n NWs heterofilms (n-type Ag₂Te and p-type Cu_1.75Te NWs) as thermoelectric materials, a considerable output voltage can be achieved under light irradiation. Besides the electricity output, the wearable device can also make our skin warm and comfortable in cold weather. Meanwhile, we combine thermoelectric generators with passive radiative cooling technology to reduce insolation of the human body and improve the performance of the device under intense solar irradiation in hot weather. Interestingly, it can also offer continuous green energy to realize various signal perceptions, suggesting a robust strategy for electricity output and self-powered wearable electronics.

Hierarchically Anisotropic Networks to Decouple Mechanical and Ionic Properties for High-Performance Quasi-Solid Thermocells

The rapid growth of wearable systems demands sustainable, mechanically adaptable, and eco-friendly energy-harvesting devices. Quasi-solid ionic thermocells have demonstrated the capability of continuously converting low-grade heat into electricity to power wearable electronics. However, a trade-off between ion conductivity and mechanical properties is one of the most challenging obstacles for developing high-performance quasi-solid thermocells. Herein, the trade-off is overcome by designing anisotropic polymer networks to produce aligned channels for ion-conducting and hierarchically assembled crystalline nanofibrils for crack blunting. The ionic conductivity of the anisotropic thermocell has a more than 400% increase, and the power density is comparable to the record of state-of-the-art quasi-solid thermocells. Moreover, compared with the existing quasi-solid thermocells with the optimal mechanical performance, this material realizes biomimetic strain-stiffening and shows more than 1100% and 300% increases in toughness and strength, respectively. We believe this work provides a general method for developing high-performance, cost-effective, and durable thermocells and also expands the applicability of thermocells in wearable systems.

Giant Thermopower of Hydrogen Ion Enhanced by a Strong Hydrogen Bond System

Ionic thermoelectric materials based on organic polymers are of great significance for low-grade heat harvesting and self-powered wearable temperature sensing. Here, we demonstrate a poly(vinyl alcohol) (PVA) hydrogel that relies on the differential transport of H⁺ in PVA hydrogels with different degrees of crystallization. After the inorganic acid is infiltrated into the physically cross-linked PVA hydrogel, the ionic conductor exhibits a huge ionic thermopower of 38.20 mV K^-1, which is more than twice the highest value reported for hydrogen ion transport thermoelectric materials. We attribute the enhanced thermally generated voltage to the movement of H⁺ in the strong hydrogen bond system of PVA hydrogels and the restrictive effect of the strong hydrogen bond system on anions. This ionic thermoelectric hydrogel opens up a new way for thermoelectric conversion devices using H⁺ as an energy carrier.

Direct measurement of the genuine efficiency of thermogalvanic heat-to-electricity conversion in thermocells

Harvesting wasted thermal energy could make important contributions to global energy sustainability. Thermogalvanic devices are simple, chemistry-based devices which can convert heat to electricity, through facile redox chemistry. The efficiency of this process is the ratio of electrical energy generated by the cell (in Watts) to the quantity of thermal energy that passes through the cell (also in Watts). Prior work estimated the quantity of thermal energy passed through a thermocell by applying a conductive heat transfer model to the electrolyte. Here, we employ a heat flux sensor to unambiguously quantify both heat flux and electrical power. By evaluating the effect of electrode separation, temperature difference and gelation of the electrolyte, we found significant discrepancy between the estimated model and the quantified reality. For electrode separation, the trend between estimated and measured efficiency went in opposite directions; as a function of temperature difference, they demonstrated the same trend, but estimated values were significantly higher. This was due to significant additional convection and radiation contributions to the heat flux. Conversely, gelled electrolytes were able to suppress heat flux mechanisms and achieve experimentally determined efficiency values in excess of the estimated values (at small electrode separations), with partially gelled systems being particularly effective. This study provides the ability to unambiguously benchmark and assess the absolute efficiency and Carnot efficiency of thermogalvanic electrolytes and even the whole thermocell device, allowing 'total device efficiency' to be quantified. The deviation between the routinely applied estimation methodology and actual measurement will support the rational development of novel thermal energy harvesting chemistries, materials and devices.

Operation of Wearable Thermoelectric Generators Using Dual Sources of Heat and Light

A wearable thermoelectric generator (WTEG) that utilizes human body heat can be a promising candidate for the wearable power generators. The temperature difference (ΔT) between the body and the environment is a stable source driving the WTEG, but this driving force is limited by the ambient temperature itself at the same time. Here, a novel WTEG that can be operated using the dual source of body heat and light with exceptionally high driving force is fabricated. The printable solar absorbing layer attached to the bottom of the WTEG absorbs ≈95% of the light from ultraviolet to far infrared and converts it into heat. To optimize the power density of WTEGs, the fill factor of the thermoelectric (TE) leg/electrode is considered through finite-difference time-domain (FDTD) simulation. When operated by the dual sources, the WTEG exhibits a power density of 15.33 µW cm^-2 , which is the highest under "actual operating conditions" among all kinds of WTEGs. In addition, unlike conventional WTEGs, the WTEG retains 83.1% of its output power at an ambient temperature of 35 °C compared to its output power at room temperature. This study will accelerate the commercialization of WTEGs by introducing a novel method to overcome their limitations.

Regulating Thermogalvanic Effect and Mechanical Robustness via Redox Ions for Flexible Quasi-Solid-State Thermocells

The design of power supply systems for wearable applications requires both flexibility and durability. Thermoelectrochemical cells (TECs) with large Seebeck coefficient can efficiently convert low-grade heat into electricity, thus having attracted considerable attention in recent years. Utilizing hydrogel electrolyte essentially addresses the electrolyte leakage and complicated packaging issues existing in conventional liquid-based TECs, which well satisfies the need for flexibility. Whereas, the concern of mechanical robustness to ensure stable energy output remains yet to be addressed. Herein, a flexible quasi-solid-state TEC is proposed based on the rational design of a hydrogel electrolyte, of which the thermogalvanic effect and mechanical robustness are simultaneously regulated via the multivalent ions of a redox couple. The introduced redox ions not only endow the hydrogel with excellent heat-to-electricity conversion capability, but also act as ionic crosslinks to afford a dual-crosslinked structure, resulting in reversible bonds for effective energy dissipation. The optimized TEC exhibits a high Seebeck coefficient of 1.43 mV K^-1 and a significantly improved fracture toughness of 3555 J m^-2, thereby can maintain a stable thermoelectrochemical performance against various harsh mechanical stimuli. This study reveals the high potential of the quasi-solid-state TEC as a flexible and durable energy supply system for wearable applications.

Polydopamine-Induced Multilevel Engineering of Regenerated Silk Fibroin Fiber for Photothermal Conversion

Solid photothermal materials with favorable biocompatibility and modifiable mechanical properties demonstrate obvious superiority and growing demand. In this work, polydopamine (PDA) induced functionalization of regenerated silk fibroin (RSF) fibers has satisfactory photothermal conversion ability and flexibility. Based on multilevel engineering, RSF solution containing PDA nanoparticles is wet spun to PDA-incorporating RSF (PDA@RSF) fibers, and then the fibers are coated with PDA via oxidative self-polymerization of dopamine to form PDA@RSF-PDA (PRP) fibers. During the wet spinning process, PDA is to adjust the mechanical properties of RSF by affecting its hierarchical structure. Meanwhile, coated PDA gives the PRP fibers extensive absorption of near-infrared light and sunlight, which is further fabricated into PRP fibrous membranes. The temperature of PRP fibrous membranes can be adjusted and increases to about 50 °C within 360 s under 808 nm laser irradiation with a power density of 0.6 W cm^-2 , and PRP fibrous membranes exhibit effective photothermal cytotoxicity both in vitro and in vivo. Under the simulated sunlight, the temperature of PRP fiber increases to more than 200 °C from room temperature and the material can generate 4.5 V voltage when assembled with a differential thermal battery, which means that the material also has the potential for flexible wearable electronic devices.

Structure and Population of Complex Ionic Species in FeCl2 Aqueous Solution by X-ray Absorption Spectroscopy

Technologies for mass production require cheap and abundant materials such as ferrous chloride (FeCl2). The literature survey shows the lack of experimental studies to validate theoretical conclusions related to the population of ionic Fe-species in the aqueous FeCl2 solution. Here, we present an in situ X-ray absorption study of the structure of the ionic species in the FeCl2 aqueous solution at different concentrations (1-4 molL-1) and temperatures (25-80 °C). We found that at low temperature and low FeCl2 concentration, the octahedral first coordination sphere around Fe is occupied by one Cl ion at a distance of 2.33 (±0.02) Å and five water molecules at a distance of 2.095 (±0.005) Å. The structure of the ionic complex gradually changes with an increase in temperature and/or concentration. The apical water molecule is substituted by a chlorine ion to yield a neutral Fe[Cl2(H2O)4]0. The observed substitutional mechanism is facilitated by the presence of the intramolecular hydrogen bonds as well as entropic reasons. The transition from the single charged Fe[Cl(H2O)5]+ to the neutral Fe[Cl2(H2O)4]0 causes a significant drop in the solution conductivity, which well correlates with the existing conductivity models.

Zinc ion thermal charging cell for low-grade heat conversion and energy storage

Converting low-grade heat from environment into electricity shows great sustainability for mitigating the energy crisis and adjusting energy configurations. However, thermally rechargeable devices typically suffer from poor conversion efficiency when a semiconductor is employed. Breaking the convention of thermoelectric systems, we propose and demonstrate a new zinc ion thermal charging cell to generate electricity from low-grade heat via the thermo-extraction/insertion and thermodiffusion processes of insertion-type cathode (VO2-PC) and stripping/plating behaviour of Zn anode. Based on this strategy, an impressively high thermopower of ~12.5 mV K-1 and an excellent output power of 1.2 mW can be obtained. In addition, a high heat-to-current conversion efficiency of 0.95% (7.25% of Carnot efficiency) is achieved with a temperature difference of 45 K. This work, which demonstrates extraordinary energy conversion efficiency and adequate energy storage, will pave the way towards the construction of thermoelectric setups with attractive properties for high value-added utilization of low-grade heat.

All-polymer wearable thermoelectrochemical cells harvesting body heat

Wearable thermoelectrochemical cells have attracted increasing interest due to their ability to turn human body heat into electricity. Here, we have fabricated a flexible, cost-effective, and 3D porous all-polymer electrode on an electrical conductive polymer substrate via a simple 3D printing method. Owing to the high degree of electrolyte penetration into the 3D porous electrode materials for redox reactions, the all-polymer based porous 3D electrodes deliver an increased power output of more than twice that of the film electrodes under the same mass loading using either n-type or p-type gel electrolytes. To realize the practical application of our thermocell, we fabricated 18 pairs of n-p devices through a series connection of single devices. The strap shaped thermocell arrangement was able to charge up a commercial supercapacitor to 0.27 V using the body heat of the person upon which it was being worn and in turn power a typical commercial lab timer.

•

A compatible high electrical conductivity polymer film works as underlying substrate

•

3D printable polymer ink with suitable rheological properties

•

A serial 18 pairs of n-p devices charged supercapacitor to power a lab timer

•

3D-printed all-polymer electrode thermocell device for harvesting body heat

Operando magnetic resonance imaging for mapping of temperature and redox species in thermo-electrochemical cells

Low-grade waste heat is an abundant and underutilised energy source. In this context, thermo-electrochemical cells (i.e., systems able to harvest heat to generate electricity) are being intensively studied to deliver the promises of efficient and cost-effective energy harvesting and electricity generation. However, despite the advances in performance disclosed in recent years, understanding the internal processes occurring within these devices is challenging. In order to shed light on these mechanisms, here we report an operando magnetic resonance imaging approach that can provide quantitative spatial maps of the electrolyte temperature and redox ion concentrations in functioning thermo-electrochemical cells. Time-resolved images are obtained from liquid and gel electrolytes, allowing the observation of the effects of redox reactions and competing mass transfer processes such as thermophoresis and diffusion. We also correlate the physicochemical properties of the system with the device performance via simultaneous electrochemical measurements.

Photovoltaic Energy Conversion and Storage of Micro-Supercapacitors Based on Emulsion Self-Assembly of Upconverting Nanoparticles

With the rapid need for new kinds of portable and wearable electronics, we must look to develop flexible, small-volume, and high-performance supercapacitors that can be easily produced and stored in a sustainable way. An integrated system simultaneously converting recyclable energy to electricity and storing energy is sought after. Here we report photovoltaic energy conversion and storage integrated micro-supercapacitors (MSCs) with asymmetric, flexible, and all-solid-state performances constructed from thousands of close-packed upconverting nanoparticles (UCNPs) via an emulsion-based self-assembly process using oleic acid (OA)-capped upconverting nanoparticles. The carbonated-UCNPs supraparticles (CSPs) are further coated with polypyrrole (PPy) to improve their electrochemical performance. Such a design can develop CSPs@PPy as electrode materials with high gravimetric capacitance, 308.6 F g^-1 at 0.6 A g^-1. The fabricated MSCs exhibit excellent areal capacitance, C _s = 21.8 mF cm^-2 at 0.36 A cm^-2 and E = 0.00684 mWh cm^-2, and have superior flexibility and cycling ability. The MSC devices have a sensitive near-infrared ray (NIR) photoelectrical response capability, which can capture the NIR of sunlight to convert it into electrical energy and store the electric energy due to an excellent capacitive performance. We propose a method for multifunctional integration of energy conversion and storage, and provide future research directions and potential applications of self-powered flexible wearable photonic electronics.

Unconventional Thermoelectric Materials for Energy Harvesting and Sensing Applications

Heat is an abundant but often wasted source of energy. Thus, harvesting just a portion of this tremendous amount of energy holds significant promise for a more sustainable society. While traditional solid-state inorganic semiconductors have dominated the research stage on thermal-to-electrical energy conversion, carbon-based semiconductors have recently attracted a great deal of attention as potential thermoelectric materials for low-temperature energy harvesting, primarily driven by the high abundance of their atomic elements, ease of processing/manufacturing, and intrinsically low thermal conductivity. This quest for new materials has resulted in the discovery of several new kinds of thermoelectric materials and concepts capable of converting a heat flux into an electrical current by means of various types of particles transporting the electric charge: (i) electrons, (ii) ions, and (iii) redox molecules. This has contributed to expanding the applications envisaged for thermoelectric materials far beyond simple conversion of heat into electricity. This is the motivation behind this review. This work is divided in three sections. In the first section, we present the basic principle of the thermoelectric effects when the particles transporting the electric charge are electrons, ions, and redox molecules and describe the conceptual differences between the three thermodiffusion phenomena. In the second section, we review the efforts made on developing devices exploiting these three effects and give a thorough understanding of what limits their performance. In the third section, we review the state-of-the-art thermoelectric materials investigated so far and provide a comprehensive understanding of what limits charge and energy transport in each of these classes of materials.

Colossal thermo-hydro-electrochemical voltage generation for self-sustainable operation of electronics

Thermoelectrics are suited to converting dissipated heat into electricity for operating electronics, but the small voltage (~0.1 mV K⁻¹) from the Seebeck effect has been one of the major hurdles in practical implementation. Here an approach with thermo-hydro-electrochemical effects can generate a large thermal-to-electrical energy conversion factor (TtoE factor), −87 mV K⁻¹ with low-cost carbon steel electrodes and a solid-state polyelectrolyte made of polyaniline and polystyrene sulfonate (PANI:PSS). We discovered that the thermo-diffusion of water in PANI:PSS under a temperature gradient induced less (or more) water on the hotter (or colder) side, raising (or lowering) the corrosion overpotential in the hotter (or colder) side and thereby generating output power between the electrodes. Our findings are expected to facilitate subsequent research for further increasing the TtoE factor and utilizing dissipated thermal energy.

Thermoelectrics are suited to converting dissipated heat into electricity for operating electronics but limited by the small voltage from the Seebeck effect. Here, the authors report a thermo-hydro-electrochemical hybrid device with −87 mV K⁻¹.

Energy Harvesting and Storage with Soft and Stretchable Materials

This review highlights various modes of converting ambient sources of energy into electricity using soft and stretchable materials. These mechanical properties are useful for emerging classes of stretchable electronics, e-skins, bio-integrated wearables, and soft robotics. The ability to harness energy from the environment allows these types of devices to be tetherless, thereby leading to a greater range of motion (in the case of robotics), better compliance (in the case of wearables and e-skins), and increased application space (in the case of electronics). A variety of energy sources are available including mechanical (vibrations, human motion, wind/fluid motion), electromagnetic (radio frequency (RF), solar), and thermodynamic (chemical or thermal energy). This review briefly summarizes harvesting mechanisms and focuses on the materials' strategies to render such devices into soft or stretchable embodiments.

Efficient Moisture-Induced Energy Harvesting from Water-Soluble Conjugated Block Copolymer-Functionalized Reduced Graphene Oxide

This Research Article demonstrates a very simple approach of a moisture-induced power-generating phenomenon using water-soluble rod-coil conjugated block copolymer (poly(3-hexythiophene)-block-poly(4-styrenesulfonic acid) (P3HT-b-PSSA)-modified reduced graphene oxide. The block copolymer-modified reduced graphene oxide (BCP-RGO) was prepared by noncovalent surface functionalization cum in situ reduction of graphene oxide. A simple device made from BCP-RGO can generate voltage upon exposure to water vapor or under different humidity conditions. The open-circuit voltage generated from the diode-like device varies with respect to the relative humidity, and the device can act as a self-powered humidity sensor. The as-prepared BCP-RGO is able to produce a maximum power density of 1.15 μW/cm² (short-circuit current density J _SC = 6.40 μA/cm²) at a relative humidity of 94%. Meanwhile, the BCP-RGO device produces a very high power density of 0.7 mW/cm² (at a short-circuit current density of 1.06 mA/cm²) after 91% water absorption. We believe that the material presented here will be very useful for a self-biased humidity sensor and moisture-induced energy harvesting. The diode-like response of the BCP-RGO device with humidity or after water absorption will make the material applicable for self-biased humidity-controlled electronic switching.

A Novel Thermocell System Using Proton Solvation Entropy

The entropy change associated with proton-coupled electron transfer (PCET) reactions significantly enhance the Seebeck coefficient (S_e ) of thermocells. A redox pair of [Ru(H_x im)₆ ]^2+/3+ (Him=imidazole, x=0≈1) releases three protons in their one-electron redox reactions in thermocells, which gave a remarkably high S_e of -3.7 mV K^-1 as confirmed by temperature-dependent square wave voltammetry. The value of S_e is proportional to the redox reaction entropy (ΔS_rc ), which increased with the number of dissociating protons. This result demonstrates the utility of PCET reaction toward efficient thermoelectric conversion.

Thermoelectric Converters Based on Ionic Conductors

Thermoelectric materials represent a new paradigm for harvesting low-grade heat, which would otherwise be dissipated to the environment uselessly. Relative to conventional thermoelectric materials generally composed of semiconductors or semi-metals, ionic thermoelectric materials are rising as an alternative choice which exhibit higher Seebeck coefficient and lower thermal conductivity. The ionic thermoelectric materials own a completely different thermoelectric conversion mechanism, in which the ions do not enter the electrode but rearrange on the electrode surface to generate a voltage difference between the hot and cold electrodes. This unique character has inspired worldwide interests on the design of ionic-type thermoelectric converters with attractive advantages of high flexibility, low cost, limited environmental pollution, and self-healing capability. Referring to the categories of ionic thermoelectric conversion, some representative ionic thermoelectric materials with their respective characteristics are summarized in this minireview. In addition, examples of applying ionic thermoelectric materials in supercapacitors, wearable devices, and fire warning system are also discussed. Insight into the challenges for the further development of ionic thermoelectric materials is finally provided.