An Ultrastable and Easily Regenerated Hydrogen-Bonded Organic Molecular Framework with Permanent Porosity

Self-standing membranes for separation: Achievements and opportunities

Supported membranes and mixed matrix membranes have a limitation of harming the mass transfer due to the incompatibility between the support layer or the matrix and the active components of the membrane. Self-standing membranes, which could structurally abandon the support layer, altogether avoid the adverse effect, thus greatly facilitating the transmembrane mass transfer process. However, the abandonment of the support layer also reduces the membrane's mechanical properties and formability. In this review, our emphasis will be on self-standing membranes within the realm of materials and separation engineering. We will explore the materials employed in the fabrication of self-standing membranes, highlighting their ability to simultaneously enhance membrane performance and promote self-standing characteristics. Additionally, we will delve into the diverse techniques utilized for crafting self-standing membranes, encompassing interfacial polymerization, filtration, solvent casting, Langmuir-Blodgett & layer-by-layer assembly, electrospinning, compression, etc. Throughout the discussion, the merits and drawbacks associated with each of these preparation methods were elucidated. We also provide a brief overview of the applications of self-standing membranes, including water purification, gas separation, organic solvent nanofiltration, electrochemistry, and membrane reactor, as well as a brief description of the general strategies for performance enhancement of self-standing membranes. Finally, the current status of self-standing membranes and the challenges they may encounter were discussed.

A Hydrogen-Bonded Organic Framework Based on Triphenylamine for Photocatalytic Silane Hydroxylation

Employing hydrogen-bonded organic frameworks (HOFs) as mild photocatalysts for organic conversions is still considerably challenging. In this work, we synthesized a hydrogen-bonded organic framework (HOF-16) and achieved the photocatalytic oxidation of silanes to generate silanols. Considering the constraints imposed by the framework structure, a significant improvement in the efficacy of singlet oxygen (1O2) generation is observed. HOF-16 exhibits remarkable photocatalytic performance when it comes to silane hydroxylation, displaying high efficiency, low catalyst loading, and good recyclability. This research highlights the immense potential of HOFs in the realm of organic photocatalysis.

Rational Tuning the Proton Conductivity and Stability of Hydrogen-Bonded Organic Frameworks

In the development of proton conductors, it is crucial to regulate proton conduction pathways and enhance structural stability. In this study, we designed and constructed three hydrogen-bonded organic frameworks (HOFs), namely, NKM-HOF-9, NKM-HOF-10, and NKM-HOF-11, with different dimensional hydrogen-bonding pathways using 4,4'-sulfonyldibenzoic acid and various bases. They are cost-effective and easy to synthesize, allowing for their large-scale production at room temperature. By purposefully altering the ammonium ions, we achieved enhancements in the conductivity and stability of these HOFs. Proton conductivity studies at different humidities and temperatures revealed that at 85 °C and 98% relative humidity, the proton conductivity of NKM-HOF-10 reached 1.7 × 10-3 S cm-1, surpassing that of NKM-HOF-9 by 1 order of magnitude. This improvement was accomplished by increasing the number of proton donors from the base, which resulted in a transition of the hydrogen bond network from discontinuous to continuous, thereby enhancing the proton conduction performance. Moreover, stability tests showed that raising the base's pKa could improve the stability of these frameworks. NKM-HOF-11, which features the highest pKa, demonstrated superior stability by maintaining its structural integrity even at 450 °C.

Self-correcting mismatches in metastable hydrogen-bonded organic frameworks with an 11-fold interpenetrated array

The polymorphic self-correction from a metastable phase to a stable one often occurs and plays crucial roles in synthesizing robust hydrogen-bonded organic frameworks (HOFs). However, identifying metastable phases and understanding the self-correcting mechanisms is a challenging venture due to their intrinsic instability. Here, we for the first time introduce 1,8-naphtholactam (Np) as a hydrogen-bonding synthon positioned on the periphery of a bicarbazole to create a versatile molecular unit for 3D HOFs. The as-synthesized NCU-HOF1, analyzed by single-crystal X-ray diffraction (SCXRD), is found to be metastable. It exhibits an 11-fold interpenetrated dia topology with a quarter of the Np units exhibiting monomeric N-H⋯O interactions between adjacent Np link sites, which readily self-correct upon desolvation to form fully dimeric ones. Consequently, the resultant NCU-HOF1a becomes highly robust in polar solvents, strong acid or alkaline aqueous solutions, and has permanent porosity with contracted cavities for selective adsorption and efficient "turn-up" fluorescent sensing of C2H4 gas. This work not only debuts a new hydrogen-bonding synthon but offers more insights into investigating solid-state dynamics in metastable HOFs.

A sustainable, eco-friendly Tb/Eu-modified HOFs for ultrasensitive detection and efficient adsorption of carcinogens in complex water environments

Developing a multifunctional material that can detect and remove carcinogens in water environments, simultaneously monitor their toxic metabolites in living organisms is significant for environmental remediation and human health. However, most research only focused on detection or adsorption carcinogens due to the difficulty of integrating multiple functions into one material, let alone monitoring their toxic metabolites. Here, a multifunctional Tb/Eu@TATB-HOF (1) is first developed to monitor two carcinogens, malachite green (MG) and its metabolites leucomalachite green (LMG), and simultaneously remove MG from the contaminated water. 1, as the dual-emission fluorescence sensor, can achieve ultrasensitive and highly visualized sensing for MG and LMG with different response modes. Even in actual samples, 1 still exhibits satisfactory sensing performances. As the adsorbent, 1 displays good recyclability and high adsorption capacity for MG. The sensing and adsorption mechanisms are explored through experiments and theoretical calculations. This work not only provides a novel insight for environmental remediation and human health through detection and removal of carcinogens, simultaneously monitoring their toxic metabolites, but first reveals the enormous potential of HOFs as multifunctional materials simultaneously for fluorescence sensing and adsorption.

Controlled crystallisation of porous crystals of luminescent platinum(II) complexes by electronic tuning of ancillary ligands

Porous molecular crystals (PMCs) have gained significant importance as next-generation functional porous materials. However, the selective crystallisation of the PMC phase remains a challenge. Herein, we have systematically controlled the stability of the luminescent PMC phase prepared using the luminescent Pt(II) complex [Pt(pbim)(N^O)] (pbim = 2-phenylbenzimidazolate, N^O = N-heteroaryl carboxylate) with Pt⋯Pt electronic interactions. The PMC phase formation varied significantly among the complexes depending on the heteroaryl group of the ancillary N^O ligand; the oxazolyl-bearing complex did not form a PMC phase, whereas the pyrazyl- and 5-fluoropyridyl-bearing complexes spontaneously formed a porous structure. This difference was rationalised by the π-stacking capability of the heteroaryl group of the ancillary ligand. Furthermore, owing to the presence of the one-dimensional Pt⋯Pt chains in this PMC phase, the photophysical properties of PMCs resulting from the Pt⋯Pt interactions were also significantly changed by the ancillary ligands.

Self-Healing B ← N-Based Hydrogen-Bonded Organic Framework for Exclusive Recognition and Separation of Toluene from Methyl-Cyclohexane

The effective separation of aromatic and aliphatic hydrocarbons remains a notable challenge in the petrochemical industry. Herein, we report a self-healing three-dimensional B ← N-based hydrogen-bonded organic framework (HOF), BN-HOF-1, constructed from discrete B ← N inclusive dimers through weak C-H···F and C-H···N hydrogen-bonding interactions. To make use of the specific recognition of the B ← N inclusive dimers for the toluene molecules and the reversible ad/desorption nature of this novel HOF, BN-HOF-1 can exclusively recognize and separate toluene from the mixtures of toluene-methylcyclohexane, thus generating 99.6% pure toluene from its mixtures after gentle heating, the recorded value among any reported materials for toluene purification. After the toluene molecules were released from the framework, it becomes the condensed BN-HOF-1a, which can be further reused for the highly selective recognition and purification of toluene from its binary mixtures, through the reversible structural recovery back to BN-HOF-1. Single-crystal X-ray diffraction and molecular modeling studies reveal that the high specific toluene recognition is attributed to the complementary electrostatic potential between the host B ← N inclusive dimers and the guest toluene, while the self-healing and recovery nature of this HOF is attributed to weak intermolecular hydrogen-bonding interactions.

Advances and Challenges in Interfacial Binding Forces for Electrocatalysts

As a practical chemical energy conversion technology, electrocatalysis could be used in fields of energy conversion and environmental protection. In recent years, significant research efforts have been devoted to the design and development of high-performance electrocatalysts because the rational design of catalysts is crucial for enhancing electrocatalytic performance. Creating electrocatalysts by forming interactions between different components at the interface is an important means of controlling and improving performance. Therefore, several common interfacial binding forces used for synthesizing electrocatalysts was systematically summarized in this review for the first time. The discussion revolves around the crucial roles these binding forces play in various electrocatalytic reaction processes. Various characterization techniques capable of proving the existence of these interfacial binding forces was also involved in the review. Finally, some prospects and challenges for designing and researching materials through the utilization of interfacial binding forces were presented.

Supramolecular Entanglement in a Hydrogen-Bonded Organic Framework Enables Flexible-Robust Porosity for Highly Efficient Purification of Natural Gas

The development of porous materials with flexible-robust characteristics shows some unique advantages to target high performance for gas separation, but remains a daunting challenge to achieve so far. Herein, we report a carboxyl-based hydrogen-bonded organic framework (ZJU-HOF-8a) with flexible-robust porosity for efficient purification of natural gas. ZJU-HOF-8a features a four-fold interpenetrated structure with dia topology, wherein abundant supramolecular entanglements are formed between the adjacent subnetworks through weak intermolecular hydrogen bonds. This structural configuration could not only stabilize the whole framework to establish the permanent porosity, but also enable the framework to show some flexibility due to its weak intermolecular interactions (so-called flexible-robust framework). The flexible-robust porosity of ZJU-HOF-8a was exclusively confirmed by gas sorption isotherms and single-crystal X-ray diffraction studies, showing that the flexible pore pockets can be opened by C3H8 and n-C4H10 molecules rather by C2H6 and CH4. This leads to notably higher C3H8 and n-C4H10 uptakes with enhanced selectivities than C2H6 over CH4 under ambient conditions, affording one of the highest n-C4H10/CH4 selectivities. The gas-loaded single-crystal structures coupled with theoretical simulations reveal that the loading of n-C4H10 can induce an obvious framework expansion along with pore pocket opening to improve n-C4H10 uptake and selectivity, while not for C2H6 adsorption. This work suggests an effective strategy of designing flexible-robust HOFs for improving gas separation properties.

Efficient and Selective Construction of 41 2 Metalla-links Using Weak C-H⋅⋅⋅Halogen Interactions

Through a coordination-driven self-assembly method, four4 1 2 ${4_1^2 }$ metalla-links and one tetranuclear monocycle were constructed with high selectivity and yield by adjusting the substituent species of the building blocks, as evidenced using X-ray crystallographic analysis, electrospray ionization-time-of-flight/mass spectrometry (ESI-TOF/MS), elemental analysis and detailed solution-state nuclear magnetic resonance (NMR) spectroscopy. Based on X-ray crystallographic analysis and independent gradient model analysis, a significant factor leading to the formation of4 1 2 ${4_1^2 }$ metalla-links was the introduction of F, Cl, Br and I atoms, which generated additional weak C-H⋅⋅⋅X (X=F, Cl, Br and I) interactions. Furthermore, the dynamic conversion of4 1 2 ${4_1^2 }$ metalla-links to monocyclic rings in methanol solution was systematically investigated using quantitative 1H NMR techniques.

Structural Design and Energy and Environmental Applications of Hydrogen-Bonded Organic Frameworks: A Systematic Review

Hydrogen-bonded organic frameworks (HOFs) are emerging porous materials that show high structural flexibility, mild synthetic conditions, good solution processability, easy healing and regeneration, and good recyclability. Although these properties give them many potential multifunctional applications, their frameworks are unstable due to the presence of only weak and reversible hydrogen bonds. In this work, the development history and synthesis methods of HOFs are reviewed, and categorize their structural design concepts and strategies to improve their stability. More importantly, due to the significant potential of the latest HOF-related research for addressing energy and environmental issues, this work discusses the latest advances in the methods of energy storage and conversion, energy substance generation and isolation, environmental detection and isolation, degradation and transformation, and biological applications. Furthermore, a discussion of the coupling orientation of HOF in the cross-cutting fields of energy and environment is presented for the first time. Finally, current challenges, opportunities, and strategies for the development of HOFs to advance their energy and environmental applications are discussed.

In Situ Transformation of an Amorphous Supramolecular Coating to a Hydrogen-Bonded Organic Framework Membrane to Trigger Selective Gas Permeation

We introduce a "solution-processing-transformation" strategy, deploying solvent vapor as scaffolds, to fabricate high-quality hydrogen-bonded organic framework (HOF) membranes. This strategy can overcome the mismatch in processing conditions and crystal growth thermodynamics faced during the facile solution processing of the membrane. The procedure includes the vapor-trigged in situ transformation of dense amorphous supramolecules to crystalline HOF-16, with HOF-11 as the transient state. The mechanism involves a vapor-activated dissolution-precipitation equilibrium shifting and hydrogen bonding-guided molecule rearrangement, elucidated through combined experimental and theoretical analysis. Upon removal of the molecular scaffolds, the resulting HOF-16 membranes showcase significant improvement in hydrogen separation performance over their amorphous counterparts and previously reported HOF membranes. The method's broad applicability is evidenced by successfully extending it to other substrates and HOF structures. This study provides a fundamental understanding of guest-induced ordered supramolecular assembly and paves the way for the advanced manufacture of high-performance HOF membranes for gas separation processes.

Protein-Integrated Hydrogen-Bonded Organic Frameworks: Chemistry and Biomedical Applications

Hydrogen-bonded organic frameworks (HOFs) are porous nanomaterials that offer exceptional biocompatibility and versatility for integrating proteins for biomedical applications. This minireview concisely discusses recent advancements in the chemistry and functionality of protein-HOF interfaces. It particularly focuses on strategic methodologies, such as the careful selection of building blocks and the genetic engineering of proteins, to facilitate protein-HOF interactions. We examine the role of enzyme encapsulation within HOFs, highlighting its capability to preserve enzyme function, a crucial aspect for applications in biosensing and disease diagnosis. Moreover, we discuss the emerging utility of nanoscale HOFs for intracellular protein delivery, illustrating their applicability as nanoreactors for intracellular catalysis and neuroprotective biorthogonal catalysis within cellular compartments. We highlight the significant advancement of designing biodegradable HOFs tailored for cytosolic protein delivery, underscoring their promising application in targeted cancer therapies. Finally, we provide a perspective viewpoint on the design of biocompatible protein-HOF assemblies, underlining their promising prospects in drug delivery, disease diagnosis, and broader biomedical applications.

Two Energetic Framework Materials Based on DNM-TNBI as Host Molecule: Effectively Coordinated by Different Cations

With the demand of develop outstanding-performance energetic materials, 1-(dinitromethyl)-4,4',5,5'-tetranitro-1H,1'H-2,2'-biimidazole (DNM-TNBI) emerged as a great contender (D: 9102 m ⋅ s-1; P: 37.6 GPa). However, the relatively poor thermal stability (Td: 142 °C) limits its practical application. In this study, DNM-TNBI as a host molecule to synthesize two new energetic open-framework materials by effectively coordinated with different cations. Their supramolecular structures were investigated and indicated that [DNM-TNBI2 -][2NH4 +] and [DNM-TNBI2 -][2K+] can be classified as a new energetic hydrogen-bonded ammonium framework (EHAF) and an energetic metal organic framework (EMOF). Meanwhile, their thermal stabilities are higher than that of DNM-TNBI and have satisfactory detonation performance ([DNM-TNBI2 -][2NH4 +], D: 8050 m ⋅ s-1, P: 26.4 GPa; [DNM-TNBI2 -][2K+], D: 8301 m ⋅ s-1, P: 30.8 GPa).

An Ultra-stable Supramolecular Framework Based on Consecutive Side-by-side Hydrogen Bonds for One-step C2H4/C2H6 Separation

The one-step efficient separation of high-purity C2H4 from C2H4/C2H6 mixtures by hydrogen-bonded organic frameworks (HOFs) faces two problems: lack of strategies for constructing stable pores in HOFs and how to obtain high C2H6 selectivity. Herein, we have developed a microporous Mortise-Tenon-type HOF (MTHOF-1, MT is short for Mortise-Tenon structure) with a new self-assembly mode for C2H4/C2H6 separation. Unlike previous HOFs which usually possess discrete head-to-head hydrogen bonds, MTHOF-1 is assembled by unique consecutive side-by-side hydrogen bonds, which result in mortise-and-tenon pores decorated with orderly arranged amide groups and benzene rings. As expected, MTHOF-1 exhibits excellent stability under various conditions and shows clear separation trends for C2H6/C2H4. The IAST selectivity is as high as 2.15 at 298 K. More importantly, dynamic breakthrough experiments have demonstrated that MTHOF-1 can effectively separate the C2H6/C2H4 feed gas to obtain polymer-grade C2H4 in one step even under high-humidity conditions.

Charge-Assisted Ionic Hydrogen-Bonded Organic Frameworks: Designable and Stabilized Multifunctional Materials

Hydrogen-bonded organic frameworks (HOFs) are a class of crystalline framework materials assembled by hydrogen bonds. HOFs have the advantages of high crystallinity, mild reaction conditions, good solution processability, and reproducibility. Coupled with the reversibility and flexibility of hydrogen bonds, HOFs can be assembled into a wide diversity of crystalline structures. Since the bonding energy of hydrogen bonds is lower than that of ligand and covalent bonds, the framework of HOFs is prone to collapse after desolventisation and the stability is not high, which limits the development and application of HOFs. In recent years, numerous stable and functional HOFs have been developed by π-π stacking, highly interpenetrated networks, charge-assisted, ligand-bond-assisted, molecular weaving, and covalent cross-linking. Charge-assisted ionic HOFs introduce electrostatic attraction into HOFs to improve stability while enriching structural diversity and functionality. In this paper, we review the development, the principles of rational design and assembly of charge-assisted ionic HOFs, and introduces the different building block construction modes of charge-assisted ionic HOFs. Highlight the applications of charge-assisted ionic HOFs in gas adsorption and separation, proton conduction, biological applications, etc., and prospects for the diverse design of charge-assisted ionic HOFs structures and multifunctional applications.

Reticular synthesis of 8-connected carboxyl hydrogen-bonded organic frameworks for white-light-emission

The rational design and construction of hydrogen-bonded organic frameworks (HOFs) are crucial for enabling their practical applications, but controlling their structure and preparation as intended remains challenging. Inspired by reticular chemistry, two novel blue-emitting NKM-HOF-1 and NKM-HOF-2 were successfully constructed based on two judiciously designed peripherally extended pentiptycene carboxylic acids, namely H8PEP-OBu and H8PEP-OMe, respectively. The large pores within these two HOFs can adsorb fluorescent molecules such as diketopyrrolopyrrole (DPP) and 9-anthraldehyde (AnC) to form HOFs ⊃ DPP/AnC composites, subsequently used in the fabrication of white-light-emitting devices (WLEDs). Specifically, two WLEDs were assembled by coating NKM-HOF-1 ⊃ DPP-0.13/AnC-3.5 and NKM-HOF-2 ⊃ DPP-0.12/AnC-3 on a 330 nm ultraviolet LED bulb, respectively. The corresponding CIE coordinates were (0.29, 0.33) and (0.32, 0.34), along with corresponding color temperatures of 7815 K and 6073 K. This work effectively demonstrates the feasibility of employing reticular chemistry strategies to predict and design HOFs with specific topologies for targeted applications.

Hydrogen-bonded organic frameworks for membrane separation

Hydrogen-bonded organic frameworks (HOFs) are a new class of crystalline porous materials that are formed through the interconnection of organic or metal-organic building units via intermolecular hydrogen bonds. The remarkable flexibility and reversibility of hydrogen bonds, coupled with the customizable nature of organic units, endow HOFs with mild synthesis conditions, high crystallinity, solvent processability, and facile self-healing and regeneration properties. Consequently, these features have garnered significant attention across various fields, particularly in the realm of membrane separation. Herein, we present an overview of the recent advances in HOF-based membranes, including their advanced fabrication strategies and fascinating applications in membrane separation. To attain the desired HOF-based membranes, careful consideration is dedicated to crucial factors such as pore size, stability, hydrophilicity/hydrophobicity, and surface charge of the HOFs. Additionally, diverse preparation methods for HOF-based membranes, including blending, in situ growth, solution-processing, and electrophoretic deposition, have been analyzed. Furthermore, applications of HOF-based membranes in gas separation, water treatment, fuel cells, and other emerging application areas are presented. Finally, the challenges and prospects of HOF-based membranes are critically pointed out.

Self-Healing Hydrogen-Bonded Organic Frameworks for Low-Concentration Ammonia Capture

The self-healing behavior has been extensively used in intelligent sensing systems capable of molecular recognition. However, most rigid crystalline frameworks, once collapsed under external stimuli like pressure, heat, or vacuum, could hardly recover to their crystalline phases under ambient conditions. Here, we report the self-healing of a new microporous hydrogen-bonded organic framework, FDU-HOF-3 (FDU = Fudan University), for ammonia (NH3) capture and compared it with the established mesoporous HOF-101. With the introduction of low-concentration NH3 into the pores, the HOFs became disordered but were then simply heated under a vacuum to return to their original crystalline states after NH3 removal. Close characterizations revealed that the repeatable self-healing behavior of these HOFs was achieved due to the COOH-NH3 acid-base interactions accompanied by the breaking and regeneration of complementary COOH-COOH hydrogen bonds. FDU-HOF-3 showed a record-capturing capability for low-concentration NH3 (8.13 mmol/g at 25 mbar) among all HOFs and displayed a quick photocurrent decrease after exposure to 250 ppm NH3 for less than 10 s. These self-healing HOFs were used to capture and release NH3 for over 10 cycles without any decrease in the adsorption capacities.

A Microporous Hydrogen-Bonded Organic Framework Based on Hydrogen-Bonding Tetramers for Efficient Xe/Kr Separation

Hydrogen-bonded organic frameworks (HOFs) have been emerging as a new type of very promising microporous materials for gas separation and purification, but few HOFs structures constructed through hydrogen-bonding tetramers have been explored in this field. Herein, we report the first microporous HOF (termed as HOF-FJU-46) afforded by hydrogen-bonding tetramers with 4-fold interpenetrated diamond networks, which shows excellent chemical and thermal stability. What's more, activated HOF-FJU-46 exhibits the highest xenon (Xe) uptake of 2.51 mmol g-1 and xenon/krypton (Kr) selectivity of 19.9 at the ambient condition among the reported HOFs up to date. Dynamic breakthrough tests confirmed the excellent Xe/Kr separation of HOF-FJU-46a, showing high Kr productivity (110 mL g-1 ) and Xe uptake (1.29 mmol g-1 ), as well as good recyclability. The single crystal X-ray diffraction and the molecular simulations revealed that the abundant accessible aromatic and pyrazole rings in the pore channels of HOF-FJU-46a can provide the multiple strong C-H⋅⋅⋅Xe interactions with Xe atoms.

Robust Hydrogen-Bonded Organic Framework with Four-Fold Interpenetration for Adsorptive Separation of C2H6/C2H4 and Xe/Kr

Hydrogen-bonded organic frameworks (HOFs) are an emerging class of porous materials that hold promise for the adsorptive separation of industrially relevant gas mixtures. However, developing HOFs with high thermal stability and resistance to water remains a daunting challenge. We report here a microporous HOF (HIAM-103) assembled from a hexacarboxylate linker (2,4,6-trimethylbenzene-1,3,5-triylisophthalic acid, H6TMBTI). The compound crystallizes in the trigonal crystal system, and its structure is a four-fold interpenetrated network. Upon thermal activation, the single crystals remain intact, allowing for precise determination of the activated structure. HIAM-103 exhibits remarkable thermal and hydrothermal stability. Its microporous channels demonstrate selective adsorption of C2H6 over C2H4 and Xe over Kr, and its separation capability toward mixed gases has been validated by column breakthrough experiments under dry and humid conditions. The preferential gas adsorption sites and separation mechanisms have been uncovered through DFT analysis, which suggests that the methyl group decorated 1D channels are the primary reason for the selective adsorption.

Hydrogen-Bonded Organic Framework to Upgrade Cycling Stability and Rate Capability of Li-CO2 Batteries

Elaborately designed multifunctional electrocatalysts capable of promoting Li+ and CO2 transport are essential for upgrading the cycling stability and rate capability of Li-CO2 batteries. Hydrogen-bonded organic frameworks (HOFs) with open channels and easily functionalized surfaces hold great potential for applications in efficient cathodes of Li-CO2 batteries. Herein, a robust HOFS (HOF-FJU-1) is introduced for the first time as a co-catalyst in the cathode material of Li-CO2 batteries. HOF-FJU-1 with cyano groups located periodically in the pore can induce homogeneous deposition of discharge products and accommodate volumetric expansion of discharge products during cycling. Besides, HOF-FJU-1 enables effective interaction between Ru0 nanoparticles and cyano groups, thus forming efficient and uniform catalytic sites for CRR/CER. Moreover, HOF-FJU-1 with regularly arranged open channels are beneficial for CO2 and Li+ transport, enabling rapid redox kinetic conversion of CO2 . Therefore, the HOF-based Li-CO2 batteries are capable of stable operation at 400 mA g-1 for 1800 h and maintain a low overpotential of 1.96 V even at high current densities up to 5 A g-1 . This work provides valuable guidance for developing multifunctional HOF-based catalysts to upgrade the longevity and rate capability of Li-CO2 batteries.

A Large-Area Patterned Hydrogen-Bonded Organic Framework Electrochromic Film and Device

Fabrication of a patterned hydrogen-bonded organic framework (HOF) films on a large scale is an extreme challenge. In this work, a large area HOF film (30 × 30 cm2 ) is prepared via an efficient and low-cost electrostatic spray deposition (ESD) approach on the un-modified conductive substrates directly. Combining the ESD with a template method, variously patterned HOF films can be easily produced, including deer- and horse-shaped films. The obtained films exhibit excellent electrochromic performance with multicolor change from yellow to green and violet, and two-band regulation at 550 and 830 nm. Benefiting from the inherently present channels of HOF materials and the additional film porosity created by ESD, the PFC-1 film could quickly change color (within 10 s). Furthermore, the large-area patterned EC device is constructed based on the above film to prove practical potential application. The presented ESD method can be extended to other HOF materials; thus, this work paves a feasible path for constructing large-area patterned HOF films for practical optoelectronic applications.

A Microporous Hydrogen Bonded Organic Framework for Highly Selective Separation of Carbon Dioxide over Acetylene

The separation of acetylene (C2 H2 ) from carbon dioxide (CO2 ) is a very important but challenging task due to their similar molecular dimensions and physical properties. In terms of porous adsorbents for this separation, the CO2 -selective porous materials are superior to the C2 H2 -selective ones because of the cost- and energy-efficiency but have been rarely achieved. Herein we report our unexpected discovery of the first hydrogen bonded organic framework (HOF) constructed from a simple organic linker 2,4,6-tri(1H-pyrazol-4-yl)pyridine (PYTPZ) (termed as HOF-FJU-88) as the highly CO2 -selective porous material. HOF-FJU-88 is a two-dimensional HOFs with a pore pocket of about 7.6 Å. The activated HOF-FJU-88 takes up a high amount of CO2 (59.6 cm3  g-1 ) at ambient conditions with the record IAST selectivity of 1894. Its high performance for the CO2 /C2 H2 separation has been further confirmed through breakthrough experiments, in situ diffuse reflectance infrared spectroscopy and molecular simulations.

Cobalt Hydrogen-Bonded Organic Framework as a Visible Light-Driven Photocatalyst for CO2 Cycloaddition Reaction

A novel cobalt hydrogen-bonded organic framework (Co-HOF, C24H14CoN4O8) was synthesized from a mixed linker, that is, 2,5-pyridinedicarboxylic acid (PDC) and 2,2'-bipyridyl (BPY) linkers and cobalt ion through a simple, one-pot, low-cost, and scalable solvothermal method. The Co-HOF was fully characterized using several analytical and spectroscopic techniques including single-crystal X-ray diffraction, diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray, and X-ray photoelectron spectroscopy. The Co-HOF exhibits high thermal and chemical stabilities compared to previously reported HOF materials. Moreover, Co-HOF shows excellent photocatalytic activity under visible light irradiation due to its narrow band gap of 2.05 eV. The cycloaddition reaction of CO2 to variable epoxides was investigated to evaluate the photocatalytic performance of Co-HOF under visible light radiation and was found to produce the corresponding cyclic carbonates in yields up to 99.9%.

Hydrogen atoms in supramolecular chemistry: a structural perspective. Where are they, and why does it matter?

Hydrogen bonding interactions are ubiquitous across the biochemical and chemical sciences, and are of particular interest to supramolecular chemists. They have been used to assemble hydrogen bonded polymers, cages and frameworks, and are the functional motif in many host-guest systems. Single crystal X-ray diffraction studies are often used as a key support for proposed structures, although this presents challenges as hydrogen atoms interact only weakly with X-rays. In this Tutorial Review, we discuss the information that can be gleaned about hydrogen bonding interactions through crystallographic experiments, key limitations of the data, and emerging techniques to overcome these limitations.

Experimental Confirmation of a Predicted Porous Hydrogen-Bonded Organic Framework

Hydrogen-bonded organic frameworks (HOFs) with low densities and high porosities are rare and challenging to design because most molecules have a strong energetic preference for close packing. Crystal structure prediction (CSP) can rank the crystal packings available to an organic molecule based on their relative lattice energies. This has become a powerful tool for the a priori design of porous molecular crystals. Previously, we combined CSP with structure-property predictions to generate energy-structure-function (ESF) maps for a series of triptycene-based molecules with quinoxaline groups. From these ESF maps, triptycene trisquinoxalinedione (TH5) was predicted to form a previously unknown low-energy HOF (TH5-A) with a remarkably low density of 0.374 g cm-3 and three-dimensional (3D) pores. Here, we demonstrate the reliability of those ESF maps by discovering this TH5-A polymorph experimentally. This material has a high accessible surface area of 3,284 m2  g-1 , as measured by nitrogen adsorption, making it one of the most porous HOFs reported to date.

Charge-Assisted Hydrogen-Bonded Organic Frameworks with Inorganic Ammonium Regulated Switchable Open Polar Sites

Surface open polar sites within the voids of porous molecular crystals define the localized physicochemical environment for critical functions such as gas separation and molecular recognition. This study presents a new charge-assisted hydrogen bonding (H-bonding) motif, by exploiting inorganic ammonium (NH₄ ⁺ ) cations as H-bond donors, to regulate the assembly of C₂ -symmetric carboxylic tectons for building robust H-bonded frameworks with permanent ultra-micropores and open oxygen sites. Diverse building blocks are bridged by tetrahedral NH₄ ⁺ to expand distinctive H-bonded networks with varied pore architectures. Particularly, the open polar oxygen sites can be switched by altering NH₄ ⁺ sources to tune the deprotonation of carboxyl-containing tectons. The activated porous PTBA·NH₄ ·DMF preserves the pore architecture and open polar oxygen sites, exhibiting remarkably selective sorption of CO₂ (107.8 cm³ g^-1 ,195 K) over N₂ (11.2 cm³ g^-1 , 77 K) and H₂ (1.4 cm³ g^-1 , 77 K).

Pore-Environment-Dependent Photoresponsive Oxidase-Like Activity in Hydrogen-Bonded Organic Frameworks

Mimicking the bioactivity of native enzymes through synthetic chemistry is an efficient means to advance the biocatalysts in a cell-free environment, however, remains long-standing challenges. Herein, we utilize structurally explicit hydrogen-bonded organic frameworks (HOFs) to mimic photo-responsive oxidase, and uncover the important role of pore environments on mediating oxidase-like activity by means of constructing isostructural HOFs. We discover that the HOF pore with suitable geometry can stabilize and spatially organize the catalytic substrate into a favorable catalytic route, as with the function of the native enzyme pocket. Based on the desirable photo-responsive oxidase-like activity, a visual and sensitive HOFs biosensor is established for the detection of phosphatase, an important biomarker of skeletal and hepatobiliary diseases. This work demonstrates that the pore environments significantly influence the nanozymes' activity in addition to the active center.

Hydrogen Bond Organic Frameworks as Radical Reactors for Enhancement in ECL Efficiency and Their Ultrasensitive Biosensing

Nowadays, electrochemiluminescence (ECL) efficiency of an organic emitter is closely related with its potential applications in food safety and environmental monitoring fields. In this work, 2,4,6-tris(4-carboxyphenyl)-1,3,5-triazine (TATB) was self-assembled to form hydrogen bond organic frameworks (HOFs), which worked as ideal reactors to generate highly active oxygen-containing radicals, followed by linking with isoluminol (ILu) via amide bond (termed ILu-HOFs). After covalent assembly with aminated indium-tin oxide electrode (labeled NH₂-ITO), the ECL efficiency of the ILu-HOFs NH₂-ITO showed about a 23.4-time increase over that of ILu itself in the presence of H₂O₂. Meanwhile, the enhanced ECL mechanism was mainly studied by electron paramagnetic resonance, theoretical calculation, and electrochemistry. On the above foundation, an aptamer "sandwich" ECL biosensor was constructed for detecting isocarbophos (ICP) via in situ elimination of H₂O₂ with catalase-linked palladium nanocubes (CAT-Pd NCs). The as-built sensor showed a broad linear range (1 pM to 100 nM) and a low limit of detection (LOD) down to 0.4 pM, coupled with efficient assays of ICP in lake water and cucumber juice samples. This strategy provides an effective way for the synthesis of advanced ECL emitter, coupled by showing promising applications in environmental and food analysis.

Application of Hydrogen-Bonded Organic Frameworks in Environmental Remediation: Recent Advances and Future Trends

The hydrogen-bonded organic frameworks (HOFs) are a class of porous materials with crystalline frame structures, which are self-assembled from organic structures by hydrogen bonding in non-covalent bonds π-π packing and van der Waals force interaction. HOFs are widely used in environmental remediation due to their high specific surface area, ordered pore structure, pore modifiability, and post-synthesis adjustability of various physical and chemical forms. This work summarizes some rules for constructing stable HOFs and the synthesis of HOF-based materials (synthesis of HOFs, metallized HOFs, and HOF-derived materials). In addition, the applications of HOF-based materials in the field of environmental remediation are introduced, including adsorption and separation (NH3, CO2/CH4 and CO2/N2, C2H2/C2He and CeH6, C2H2/CO2, Xe/Kr, etc.), heavy metal and radioactive metal adsorption, organic dye and pesticide adsorption, energy conversion (producing H2 and CO2 reduced to CO), organic dye degradation and pollutant sensing (metal ion, aniline, antibiotic, explosive steam, etc.). Finally, the current challenges and further studies of HOFs (such as functional modification, molecular simulation, application extension as remediation of contaminated soil, and cost assessment) are discussed. It is hoped that this work will help develop widespread applications for HOFs in removing a variety of pollutants from the environment.

Hybrid Hydrogen-Bonded Organic Frameworks: Structures and Functional Applications

As a new class of porous crystalline materials, hydrogen-bonded organic frameworks (HOFs) assembled from building blocks by hydrogen bonds have gained increasing attention. HOFs benefit from advantages including mild synthesis, easy purification, and good recyclability. However, some HOFs transform into unstable frameworks after desolvation, which hinders their further applications. Nowadays, the main challenges of developing HOFs lie in stability improvement, porosity establishment, and functionalization. Recently, more and more stable and permanently porous HOFs have been reported. Of all these design strategies, stronger charge-assisted hydrogen bonds and coordination bonds have been proven to be effective for developing stable, porous, and functional solids called hybrid HOFs, including ionic and metallized HOFs. This Review discusses the rational design synthesis principles of hybrid HOFs and their cutting-edge applications in selective inclusion, proton conduction, gas separation, catalysis and so forth.

2D Organic Materials: Status and Challenges

In the past few decades, 2D layer materials have gradually become a central focus in materials science owing to their uniquely layered structural qualities and good optoelectronic properties. However, in the development of 2D materials, several disadvantages, such as limited types of materials and the inability to synthesize large-scale materials, severely confine their application. Therefore, further exploration of new materials and preparation methods is necessary to meet technological developmental needs. Organic molecular materials have the advantage of being customizable. Therefore, if organic molecular and 2D materials are combined, the resulting 2D organic materials would have excellent optical and electrical properties. In addition, through this combination, the free design and large-scale synthesis of 2D materials can be realized in principle. Furthermore, 2D organic materials exhibit excellent properties and unique functionalities along with great potential for developing sensors, biomedicine, and electronics. In this review, 2D organic materials are divided into five categories. The preparation methods and material properties of each class of materials are also described in detail. Notably, to comprehensively understand each material's advantages, the latest research applications for each material are presented in detail and summarized. Finally, the future development and application prospects of 2D organic materials are briefly discussed.

Boric Acid Functional Fluorescent Covalent-Organic Framework for Sensitive and Selective Visualization of CH3Hg. ACS APPLIED MATERIALS & INTERFACES 2023;15:9524-9532. [PMID: 36757912 DOI: 10.1021/acsami.2c23302]

Methylmercury (CH3Hg+) recognition remains a challenging and imperative task due to its high toxicity and wide existence in the ecosystem. Herein, a novel fluorescent covalent-organic framework containing a boric acid functional group (COF-BA) was prepared by a postmodification strategy for CH3Hg+ detection. COF-BA served as a sensing platform for CH3Hg+ with fluorescence static quenching accompanied by fluorescence color changing from intense blue to colorless, and the detection limit was determined as 1.68 μM in a relatively narrow concentration range. COF-BA also exhibited superior selectivity toward CH3Hg+ detection. Furthermore, the spiked and recovery test in real water samples showed its efficient detection practicality. The detection mechanism of COF-BA toward CH3Hg+ was investigated. The recognitive boric acid group in COF-BA was first replaced by CH3Hg+. Then, the quinoline structure that served to limit the rotation of the imine bond was disrupted, leading to dramatic fluorescence quenching. The boric acid functional COF fluorescent probe can be a promising sensing platform for the detection of methylmercury and also provides new ideas for the construction of new fluorescent COF materials.

Multifunctional Porous Hydrogen-Bonded Organic Frameworks: Current Status and Future Perspectives

Hydrogen-bonded organic frameworks (HOFs), self-assembled from organic or metalated organic building blocks (also termed as tectons) by hydrogen bonding, π-π stacking, and other intermolecular interactions, have become an emerging class of multifunctional porous materials. So far, a library of HOFs with high porosity has been synthesized based on versatile tectons and supramolecular synthons. Benefiting from the flexibility and reversibility of H-bonds, HOFs feature high structural flexibility, mild synthetic reaction, excellent solution processability, facile healing, easy regeneration, and good recyclability. However, the flexible and reversible nature of H-bonds makes most HOFs suffer from poor structural designability and low framework stability. In this Outlook, we first describe the development and structural features of HOFs and summarize the design principles of HOFs and strategies to enhance their stability. Second, we highlight the state-of-the-art development of HOFs for diverse applications, including gas storage and separation, heterogeneous catalysis, biological applications, sensing, proton conduction, and other applications. Finally, current challenges and future perspectives are discussed.

Exploring Multifunctional Hydrogen-Bonded Organic Framework Materials

Hydrogen-bonded organic framework (HOF) materials have provided a new dimension and bright promise as a new platform for developing multifunctional materials. They can be readily self-assembled from their corresponding organic molecules with diverse functional sites such as carboxylic acid and amine groups for their hydrogen bonding and aromatic ones for their weak π···π interactions to stabilize the frameworks. Compared with those established porous materials such as zeolites, metal-organic frameworks (MOFs), and covalent-organic frameworks (COFs), it is much more difficult to stabilize HOFs and thus establish their permanent porosities given the fact that hydrogen bonds are typically weaker than ionic, coordination, and covalent bonds. But it provides the uniqueness of HOF materials in which they can be easily recovered and regenerated through simple recrystallization. HOF materials can also be easily and straightforwardly processed and very compatible with the biomolecules, making them potentially very useful materials for industrial and biomedical applications. The reversible and weak bonding nature of the hydrogen bonds can be readily utilized to construct flexible porous HOF materials in which we can tune the temperature and pressure to control their porosities and, thus, their diverse applications, for example, on gas separations, gas storage, drug delivery, and sensing. Some specific organic functional groups are quite directional for the hydrogen bond formations; for example, carboxylic acid prefers to form a directional dimer, which has enabled us to readily construct reticular porous HOF materials whose pores can be systematically tuned. In this Account, we outline our journey of exploring this new type of porous material by establishing one of the first porous HOFs in 2011 and thus developing its diverse applications. We have been able to use organic molecules with different functional sites, including 2,4-diaminotriazine (DAT), carboxylic acid (COOH), aldehyde (CHO), and cyano (CN), to construct porous HOFs. Through tuning the pore sizes, introducing specific binding sites, and making use of the framework flexibility, we have realized a series of HOF materials for the gas separations of C₂H₂/C₂H₄, C₂H₄/C₂H₆, C₃H₆/C₃H₈, C₂H₂/CO₂, CO₂/N₂, and Xe/Kr and enantioselective separation of alcohols. To make use of optically active organic molecules, we have developed HOF materials for their luminescent sensing and optical lasing. Our research endeavors on multifunctional HOF materials have initiated extensive research in this emerging research topic among chemistry and materials sciences communities. We foresee that not only many more HOF materials will be developed but novel functions will be fulfilled beyond our imaginations soon.

A Flexible Hydrogen-Bonded Organic Framework Constructed from a Tetrabenzaldehyde with a Carbazole N-H Binding Site for the Highly Selective Recognition and Separation of Acetone

Rational design of hydrogen-bonded organic frameworks (HOFs) with multiple functionalities is highly sought after but challenging. Herein, we report a multifunctional HOF (HOF-FJU-2) built from 4,4',4'',4'''-(9H-carbazole-1,3,6,8-tetrayl)tetrabenzaldehyde molecule with tetrabenzaldeyde for their H bonding interactions and carbazole N-H site for its specific recognition of small molecules. The Lewis acid N-H sites allow HOF-FJU-2 facilely separate acetone from its mixture with another solvent like methanol with smaller pK_a value. The donor (D)-π-acceptor (A) aromatic nature of the organic building molecule endows this HOF with solvent dependent luminescent/chromic properties, so the column acetone/methanol separation on HOF-FJU-2 can be readily visualized.

Multi-Responsive Sensor Based on Porous Hydrogen-Bonded Organic Frameworks for Selective Sensing of Ions and Dopamine Molecules

Hydrogen-bonded organic frameworks (HOFs), as an emerging porous material, have attracted increasing research interest in fluorescence sensing due to their inherent fluorescence emission units with unique physicochemical properties. Herein, based on the organic building block 3,3',5,5'-tetrakis-(4-carboxyphenyl)-1,1'-biphenyl (H₄TCBP), the porous material HOF-TCBP was successfully synthesized using hydrogen bond self-assembly in a DMF solution. The fluorescence properties of the HOF-TCBP solution showed that when the concentration was high, excimers were easily formed, the PL emission was red-shifted, and the fluorescence intensity became weaker. HOF-TCBP showed good sensitivity and selectivity to metal ions Fe³⁺, Cr³⁺, and anion Cr₂O₇^2-. In addition, HOF-TCBP can serve as a label-free fluorescent sensor material for the sensitive and selective detection of dopamine (DA). HOF-based DA sensing is actually easy, low-cost, simple to operate, and highly selective for many potential interfering substances, and it has been successfully applied to the detection of DA in biological samples with satisfactory recoveries (101.1-104.9%). To our knowledge, this is the first report of HOF materials for efficient detection of the neurotransmitter dopamine in biological fluids. In short, this work widely broadens the application of HOF materials as fluorescent sensors for the sensing of ions and biological disease markers.

An Ultrasensitive Picric Acid Sensor Based on a Robust 3D Hydrogen-Bonded Organic Framework

Hydrogen-bonded organic frameworks (HOFs), as a newly developed porous material, have been widely used in various fields. To date, several organic building units (OBUs) with tri-, tetra-, and hexa-carboxylic acid synthons have been applied to synthesize HOFs. To our knowledge, di-carboxylic acids have rarely been reported for the construction of HOFs, in particular, di-carboxylic acid-based HOFs with fluorescence sensing properties have not been reported. In this study, a rare example of a di-carboxylic acid-based, luminescent three-dimensional hydrogen-bonded organic framework has been successfully constructed and structurally characterized; it has a strong electron-rich property originated from its organic linker 9-phenylcarbazole-3,6-dicarboxylic acid. It represents the first example of HOF-based sensors for the highly selective and sensitive detection of PA (Picric acid) with reusability; the LOD is less than 60 nM. This work thus provides a new avenue for the fabrication of fluorescent HOFs sensing towards explosives.

Solvent-Triggered Fast and Visible Switching between Cage- and Channel-Type Hydrogen-Bonded Organic Frameworks

The inherent weak bonding nature of hydrogen-bonded organic frameworks (HOFs) performs like a double-edged sword in that it endows HOFs with superiority in processability and dynamicity but deactivates its on-demand controllability in the crystalline phase. Herein, based on the synergy of dynamic H-bonding interactions and the tailored low solubility in common organic solvents, reversible and fast topological transitions between cage- and channel-type HOFs were achieved upon immersing in the solution state. The aggregation-induced-emission character of the tecton facilitates the visualization of the elusive initial transition process with high sensitivity. In addition, the visible transition from cage- and channel-type HOFs to thermally stable crystalline phases is also achieved under thermal induction.

Confining enzymes in porous organic frameworks: from synthetic strategy and characterization to healthcare applications

Enzymes are a class of natural catalysts with high efficiency, specificity, and selectivity unmatched by their synthetic counterparts and dictate a myriad of reactions that constitute various cascades in living cells. The development of suitable supports is significant for the immobilization of structurally flexible enzymes, enabling biomimetic transformation in the extracellular environment. Accordingly, porous organic frameworks, including metal organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs), have emerged as ideal supports for the immobilization of enzymes because of their structural features including ultrahigh surface area, tailorable porosity, and versatile framework compositions. Specially, organic framework-encased enzymes have shown significant enhancement in stability and reusability, and their tailorable pore opening provides a gatekeeper-like effect for guest sieving, which is beneficial for mimicking intracellular biocatalysis processes. This immobilization technique brings new insight into the development of next-generation enzyme materials and shows huge potential in healthcare applications, such as biomarker diagnosis, biostorage, and cancer and antibacterial therapies. In this review, we describe the state-of-the-art strategies for the structural immobilization of enzymes using the well-explored MOFs and burgeoning COFs and HOFs as scaffolds, with special emphasis on how these porous framework-confined technologies can provide a favorable microenvironment for mimicking natural biocatalysis. Subsequently, advanced characterization techniques for enzyme conformation, the effect of the confined microenvironment on the activity of enzymes, and the emerging healthcare applications will be surveyed.