Cyclic (Alkyl)(amino)carbenes (CAACs): Recent Developments

A Strongly Ambiphilic Ferrocene-Based Cyclic (Alkyl)(amino)carbene - Specific Decomposition to an Enamine by a 1,2-Phenyl Shift

The recently described crystalline cyclic (alkyl)(amino)carbene with a 1,1'-ferrocenylene (fc) backbone fc(CPh2-C-NMes) (A, Mes=mesityl) is highly reactive due to its particularly pronounced ambiphilicity and is thermally not stable in solution due to an intramolecular insertion of the divalent carbon atom into a methyl C-H bond of the Mes substituent. The closely related congener fc(CPh2-C-N-p-C6H4-tBu) (1) cannot undergo such an insertion reaction. Nevertheless, 1 is too short-lived for isolation due to a rapid 1,2-shift of a phenyl group, furnishing the isomeric cyclic enamine fc[C(Ph)=C(Ph)-N-p-C6H4-tBu] (1') in a specific decomposition process unprecedented for CAACs. Trapping of 1 was possible with carbon monoxide, elemental selenium and with [CuBr(SMe2)], respectively affording the aminoketene 1=C=O, the selenoamide 1=Se and the homoleptic CuI complex [Cu(1)2][CuBr2]. 1 is an even stronger ambiphile than A according to NMR spectroscopic data. Similar to A, 1 does not react with H2, because the experimentally observed intramolecular process is kinetically more favourable according to DFT results.

Diphosphaenones: beyond the phosphorus analogue of enones

Phosphaenones, like their carbon analogue enones (C[double bond, length as m-dash]C-C[double bond, length as m-dash]O), are promising building blocks for synthetic chemistry and materials science. However, in contrast to the α- and β-phosphaenones, structurally and spectroscopically well-defined diphosphaenones (DPEs) are rare. In this study, we disclose the isolation and spectroscopic characterization of N-heterocyclic vinyl (NHV) substituted acyclic DPEs 3a,b [NHV-P[double bond, length as m-dash]P-C(O)-NHV]. X-ray diffraction methods allowed determination of the structures, which show a central planar trans P[double bond, length as m-dash]P-C[double bond, length as m-dash]O configuration. Compound 3a behaves like classical enones and shows 1,4-addition across the P[double bond, length as m-dash]P-C[double bond, length as m-dash]O unit, which proceeds in a stepwise manner. In contrast, 3a exhibits also 1,2-addition across the P[double bond, length as m-dash]P but not the C[double bond, length as m-dash]O double bond, which differentiates it from enones.

Bicyclic (alkyl)(amino)carbenes (BICAACs): synthesis, characteristics, and applications

Carbenes in general and isolable NHCs (N-heterocyclic carbenes) in particular have been useful ligands in recent years. The emergence of CAACs [cyclic(alkyl)(amino)carbenes], BICAACs [bicyclic(alkyl)(amino)carbenes], and many other carbenes has marked revolutionary milestones in this field. These carbenes possess an intriguing blend of highly electrophilic and nucleophilic characteristics, owing to their remarkably narrow HOMO-LUMO energy gap. The isolation and characterization of these carbenes hold significance not only due to their fascinating electronic properties but have demonstrated their prowess across various domains, including isolation of transition metal complexes, medicinal applications, catalysis, and radical stabilization. While the chemistry of 5-membered NHCs and CAACs has been extensively explored, the investigation of BICAACs has just begun. This review covers the synthesis, characterization, and reactivity of BICAACs and outlines the diverse applications of BICAACs in organometallic chemistry, metal-free catalysis, and main-group chemistry.

Correlation Between NMR Coupling Constants and σ-Donating Properties of N-Heterocyclic Carbenes and Their Derivatives

Is the 1JC-H coupling constant for protonated carbene a relevant measure of its σ-donation ability? This paper addresses this question by comparing calculated 1JC-H values with various experimental and theoretical approaches across a broad spectrum of carbene compounds. We examined Arduengo-type NHCs based on the 2-imidazolylidene scaffold and many other derivatives with modified frameworks, including carbenes with extended, saturated, or conjugated rings, reduced heteroatom stabilization, alternative heteroatoms, permanently charged carbenes, acyclic carbenes, amidocarbenes, and cyclic amino(alkyl/aryl) carbenes, carbodicarbenes and carbodiphosphoranes. Our findings reveal a nuanced relationship between different parameters associated with σ-interaction, such as 1JC-H, Huynh electronic parameter (HEP), σ-donation from ETS-NOCV, and lone pair energy. Notably, the best correlation was observed between 1JC-H and the ETS-NOCV method, particularly for mono- and diaminocarbenes, highlighting the utility of 1JC-H in comparing σ-donation among structurally similar carbene types. However, the use of 1JC-H as a universal measure across all carbene classes appears limited, especially when considering carbenes with significantly different structural frameworks. While HEP is less effective for carbenes with diverse structural backbones, our study suggests that 1JC-H has potential across a broader range of systems. Additionally, the analysis demonstrates that lone pair energy reflects basicity rather than σ-donor ability.

Synthesis and structures of molecular beryllium Grignard analogues featuring terminal and bridging pseudohalides

The carbene-stabilised beryllium Grignards [(CAAC)BeBrR] (R = CAACH 1a, Dur 1b; CAAC/H = 1-(2,6-diisopropylphenyl)-2,2,4,4-tetramethylpyrrolidin-2-yl/idene; Dur = 2,3,5,6-tetramethylphenyl) undergo salt metathesis with various pseudohalide salt precursors. Whereas with [NaNCS] the thiocyanato Grignards [(CAAC)Be(NCS)R] (R = CAACH 2a, Dur 2b) are obtained selectively, salt metatheses with [Na(OCP)(dioxane)2.3] and [K(OCN)] are fraught with side reactions, in particular scrambling of both neutral and anionic ligands, leading to complex product mixtures, from which the first examples of beryllium phosphaethynolate Grignards [(thf)2(CAACH)Be(OCP)] (3) and [(CAAC)Be(OCP)R] (R = CAACH 4a, Dur 4b), as well as the isocyanate-bridged hexamer [(CAAC)BrBe(1,3-μ-OCN)]6 (7) were determined as the main products. The complexity of possible side reactions is seen in complex 5, a byproduct of the salt metathesis of 1b with [Na(OCP)(dioxane)2.3], which hints at radical redox processes, OCP homocoupling, OCP coupling with CAAC, as well as OCP insertion into the Be-R bond. Finally, the unstable, tetrameric cyano-bridged beryllium Grignard [(thf)(CAACH)Be(1,2-μ-CN)] (8) was obtained by salt metathesis of 1a with [Na/KSeCN] alongside one equiv. CAACSe. The new complexes were characterised by heteronuclear NMR and IR spectroscopy, as well X-ray crystallography.

Heavy Alkaline Earth Cyclic (Alkyl)(Amino)Carbene Complexes Supported by Aryl-Silyl Amides

A series of 8 trigonal planar, heavy alkaline earth (AE = Ca-Ba) metal complexes containing cyclic (alkyl)(amino)carbene (CAAC) ligands were prepared from AE bis(amide) species. Complexation can be achieved by first generating the free carbene in situ or by direct addition of the free carbene, with the former route giving rise to unexpected mixed-amide AE complexes. The frontier molecular orbitals of the highly equatorial, 3-coordinate AE-CAAC species were also probed computationally, revealing the lowest unoccupied molecular orbital (LUMO) consisting predominantly of the π* system located on the carbene ligand.

Syntheses, Geometric and Electronic Structures of Inorganic Cumulenes

Molecular chains of two-coordinate carbon atoms (cumulenes) have long been targeted, due to interest in the electronic structure and applications of extended π-systems, and their relationship to the carbon allotrope, carbyne. While formal (isoelectronic) B═N for C═C substitution has been employed in two-dimensional (2-D) materials, unsaturated one-dimensional all-inorganic "molecular wires" are unknown. Here, we report high-yielding synthetic approaches to heterocumulenes containing a five-atom BNBNB chain, the geometric structure of which can be modified by choice of end group. The diamido-capped system is bent at the 2-/4-positions, and natural resonance theory calculations reveal significant contributions from B═N(:)-B≡N-B resonance forms featuring a lone pair at N (consistent with observed N-centered nucleophilicity). Molecular modification to generate a linear system best described by a B═N═B═N═B resonance structure involves chemical transformation of the capping groups (using B(C5F5)3) to enhance their π-acidity and conjugate the N-lone pairs.

Air and Water Stable Bicyclic (Alkyl)(Amino)Carbene Stabilized Phosphenium Cation: Reactivity and Selective Fluoride Ion Affinity

The synthesis and reactivity of an air and water stable Bicyclic (alkyl)(amino)carbene (BICAAC) stabilized phosphenium cation (1) is reported. Air and water stable phosphenium cation are rare in the literature. Compound 1 is obtained by reaction of BICAAC with Ph2PCl in THF followed by anion exchange with LiOTf. The reduction and oxidation of 1 yielded corresponding α-radical phosphine species (2) and BICAAC stabilized phosphenium oxide (3) respectively. All compounds are well characterized by single crystal X-ray diffraction studies. The Lewis acidity of compounds 1 and 3 are determined by conducting fluoride ion affinity experiments using UV-Vis spectrophotometry and multinuclei NMR spectroscopy. Compounds 1 and 3 exhibited selective binding to fluoride anion but did not interact with other halides (Cl- and Br-). Quantum chemical calculations were performed to understand the structure and nature of bonding interactions in these compounds, as well as to comprehend the specific bonding affinity to fluoride over other halide ions.

Triplet carbenes with transition-metal substituents

The extraordinary advances in carbene (R1-C-R2) chemistry have been fuelled by strategies to stabilize the electronic singlet state via π interactions. In contrast, the lack of similarly efficient approaches to obtain authentic triplet carbenes with appreciable lifetimes beyond cryogenic temperatures hampers their exploitation in synthesis and catalysis. Transition-metal substitution represents a potential strategy, but metallocarbenes (M-C-R) usually represent high-lying excited electronic configurations of the well-established carbyne complexes (M≡C-R). Here we report the synthesis and characterization of triplet metallocarbenes (M-C-SiMe3, M = PdII, PtII) that are persistent beyond cryogenic conditions, and their selective reactivity towards carbene C-H insertion and carbonylation. Bond analysis reveals significant stabilization by spin-polarized push-pull interactions along both π-bonding planes, which fundamentally differs from bonding in push-pull singlet carbenes. This bonding model, thus, expands key strategies for stabilizing the open-shell carbene electromers and closes a conceptual gap towards carbyne complexes.

A Lead(II) Substituted Triplet Carbene

Reaction of the pincer-type ligand L3 supported complex [L3PbBr][BArF24] (1) with Li[(C(═N2)TMS)] furnishes [L3Pb(C(═N2)TMS)][BArF24] (2). Diazo-compound 2 eliminates dinitrogen upon irradiation affording formal plumba-alkyne 3, which persists in cold fluoroarene solutions. Variable temperature UV/Vis and NMR spectroscopies in combination with quantum-chemical calculations identify 3 as a metal-substituted triplet carbene. In-crystallo irradiation of [L3Pb(C(═N2)TMS)(tol)][BArF24] (2·tol) provides a snapshot of intermolecular C-H bond insertion with toluene (4).

NHC aluminum chemistry on the rise

This perspective highlights recent developments of the use of N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (cAACs) in alane and aluminum organyl chemistry. Especially in the last few years this flourishing research field led to some remarkable discoveries including various substitution patterns at the central aluminum atom, different oxidation states, neutral and charged compounds with varying coordination numbers and unique reactivities. Thereby NHCs play a vital role in the stabilization of these otherwise highly reactive compounds, which would not be realizable without the use of this intriguing class of ligands. Nevertheless, main group hydrides and especially NHC ligated alanes also tend to undergo NHC decomposition reactions, which are part of ongoing research and provide important information for NHC research in general.

Carbodiphosphorane-Activated Distibene and Dibismuthene Dications

Low-valent antimony and bismuth have emerged as novel platforms for achieving reversible small-molecule activation at main-group metals. Although various examples of oxidative addition reactions at monomeric Sb(I) and Bi(I) have been reported, the chemistry of the heavy group 15 Sb(I)═Sb(I)/Bi(I)═Bi(I) double bonds toward small molecules remains largely unexplored. In this study, we present a straightforward synthesis of distibene and dibismuthene dications coordinated with a neutral carbodiphosphorane (CDP) ligand. The nonbonding interactions between the occupied p-orbital at the CDP ligand and the π-bonding orbital of the Sb═Sb/Bi═Bi bonds yield compounds with exceptionally small HOMO-LUMO gaps. In addition, the reduction of steric hindrance compared to known neutral derivatives stabilized with bulky aryl groups allows for better accessibility of the double bonds. This high reactivity is demonstrated in the oxidative addition of distibene to diphenyldisulfide as well as in [2+2] cycloadditions to alkynes. Additionally, the Sb═Sb bond reversibly adds to 2,3-dimethylbutadiene in a [4+2] cycloaddition reaction.

Intermolecular 1,2-Aminoboration of Alkynes and the Critical Role of Electron-Rich Alkynes

The intramolecular 1,2-aminoboration of alkynes by aminoboranes is rare and invariably requires a catalyst to proceed, while the intermolecular aminoboration of alkynes is yet entirely unknown. Through an exploration of the significance of electronics in alkynes for activating the B-N σ-bond of aminoboranes, we demonstrate in this work the first intermolecular 1,2-aminoboration of alkynes. These reactions employ a series of (amino)dihaloboranes and aminoboronic esters, mild reaction conditions, and no catalysts, yielding syn-addition alkene products with the incorporation of two crucial functionalities: amino and boryl. While highly electron-rich examples can afford the aminoborated products (Z)-2-borylethenamines, other alkynes, including unactivated and less electron-rich examples, do not lead to the corresponding aminoborated products due to the fundamental impediment that the reactions are significantly endergonic.

Main-group compounds selectively activate natural gas alkanes under room temperature and atmospheric pressure

Most C-H bond activations of natural gas alkanes rely on transition metal complexes. Activations by using main-group systems have been reported but required heating or photo-irradiation under high atmospheric pressure with rather low regioselectivity. Here we report that Lewis acid-carbene adducts facilely undergo oxidative additions to C-H bonds of ethane, propane and n-butane with high selectivity under room temperature and atmospheric pressure. The Lewis acids can be moved by the addition of a base and the carbene-derived products can be easily converted into aldehydes. This work offers a route for main-group element compounds to selectively functionalise C-H bonds of natural gas alkanes and other small molecules.

(Phosphino)(stannyl)carbene

The synthesis of a (phosphino)(stannyl)carbene is documented. The combination of phosphino and stannyl substituents imparts a highly ambiphilic nature to this carbene, enabling reactions with cyanide, isocyanide, and carbon monoxide. This leads to rare stannylketenimines and a stannylketene.

Synthesis and Application of Robust Spiro [Fluorene-9] CAAC Ruthenium Alkylidene Complexes for the "One-Pot" Conversion of Allyl Acetate to Butane-1,4-diol

A series of a novel CAAC ligands featuring a spiro-fluorene group have been synthesized and complexed with ruthenium alkylidenes, yielding the corresponding Hoveyda-type derivatives as a new family of olefin metathesis catalysts. The novel complexes have been characterized by XRD, HRMS and NMR measurements. The synthetised complexes were tested in catalysis and showed good activity in olefin metathesis, as demonstrated on diethyl diallylmalonate and allyl acetate substrates. The unique backbone in the ligand with the large, yet inflexible condensed system renders interesting properties to the catalyst, exemplified by the good catalytic performance and improved Z-selectivity. In addition, the complex can also serve as a hydrogenation catalyst in a consecutive (one-pot) reaction. The latter reaction can convert allyl acetate to butane-1,4-diol, a valuable chemical intermediate for biodegradable polybutylene succinate (PBS).

A Coppoborylene Stabilized by Multicenter Covalent Bonding and Its Amphoteric Reactivity to CO

A cationic copper-stabilized coppoborylene was prepared and structurally characterized via infrared photodissociation spectroscopy and density functional theory calculations. This structure exemplifies a new class of borylenes stabilized by three-center-two-electron metal-boron-metal covalent bonding interaction, displaying exceptional σ-acidity and unparalleled π-donor capability for CO activation that outperforms all of the known transition metal cations and is comparable or even superior to the documented base-trapped borylenes. Its neutral form represents a monovalent boron compound with a strongly reactive amphoteric boron center built on transition-metal-boron bonds, which inspires the design and synthesis of new members of the borylene family.

Pentacyclic fused diborepinium ions with carbene- and carbone-mediated deep-blue to red emission

Designing molecules that can undergo late-stage modifications resulting in specific optical properties is useful for developing structure-function trends in materials, which ultimately advance optoelectronic applications. Herein, we report a series of fused diborepinium ions stabilized by carbene and carbone ligands (diamino-N-heterocyclic carbenes, cyclic(alkyl)(amino) carbenes, carbodicarbenes, and carbodiphosphoranes), including a detailed bonding analysis. These are the first structurally confirmed examples of diborepin dications and we detail how distortions in the core of the pentacyclic fused system impact aromaticity, stability, and their light-emitting properties. Using the same fused diborepin scaffold, coordinating ligands were used to dramatically shift the emission profile, which exhibit colors ranging from blue to red (358-643 nm). Notably, these diborepinium ions access expanded regions of the visible spectrum compared to known examples of borepins, with quantum yields up to 60%. Carbones were determined to be superior stabilizing ligands, resulting in improved stability in the solution and solid states. Density functional theory was used to provide insight into the bonding as well as the specific transitions that result in the observed photophysical properties.

Streamlined synthetic assembly of α-chiral CAAC ligands and catalytic performance of their copper and ruthenium complexes

The unique electronic and steric parameters of chiral cyclic alkyl amino carbene (CAAC) ligands render them appealing steering ligands for enantioselective transition-metal catalyzed transformations. Due to the lack of efficient synthetic strategies to access particularly attractive α-chiral CAACs assessment and exploitation of their full synthetic potential remain difficult. Herein, we report a streamlined strategy to assemble a library of diastereo- and enantiomerically pure CAAC ligands featuring the notoriously difficult to access α-quaternary stereogenic centers. A tailored Julia-Kocienski olefination reagent allows the Claisen-rearrangement to be leveraged as an expedient route to form the synthetically pivotal racemic α-chiral methallyl aldehydes. Subsequent condensation with chiral amines and further cyclization provided a library of diastereomeric mixtures of the targeted ligand precursors. The CAAC salts as well as their corresponding metal complexes are conveniently separable by standard silica gel flash chromatography closing a long-standing accessibility gap in chiral CAAC ligands with proximal α-chirality. The rapid availability of both diastereomers enables testing of the relevance and synergistic effects of two chiral centers on the ligand in catalytic applications. A broad range of metal complexes with copper, gold, rhodium and ruthenium were obtained and structurally analyzed. The catalytic performances of the corresponding chiral CAAC copper and ruthenium complexes were assessed in enantioselective conjugate borylations and asymmetric ring closing metathesis, displaying selectivities of up 95 : 5 er.

Making Full Use of TMSCF3: Deoxygenative Trifluoromethylation/Silylation of Amides

As one of the most powerful trifluoromethylation reagents, (trifluoromethyl)trimethylsilane (TMSCF3) has been widely used for the synthesis of fluorine-containing molecules. However, to the best of our knowledge, the simultaneous incorporation of both TMS- and CF3- groups of this reagent onto the same carbon of the products has not been realized. Herein, we report an unprecedented SmI2/Sm promoted deoxygenative difunctionalization of amides with TMSCF3, in which both silyl and trifluoromethyl groups are incorporated into the final product, yielding α-silyl-α-trifluoromethyl amines with high efficiency. Notably, the silyl group could be further transformed into other functional groups, providing a new method for the synthesis of α-quaternary α-CF3-amines.

Stable CAAC-Triazenes: A New Nitrogen Ligand System With Donor and Conformational Flexibility, and With Application in Olefin Activation Catalysis

N-heterocyclic imines such as pyridylidene amines impart high catalytic activity when coordinated to a transition metal, largely imposed by their electronic flexibility. Here, this donor flexibility has been applied for the first time to CAAC-based systems through the synthesis of CAAC-triazenes. These new ligands offer a larger π-conjugation that extends from the N-heterocyclic carbene through three nitrogens rather than just one, as observed in N-heterocyclic imines. We demonstrate the straightforward synthesis of three new CAAC-triazenes containing different substituents on the terminal triazene nitrogen. These compounds are remarkably stable up to 120 °C without loss of N2 as typically observed with similar triazenes. E-to-Z isomerization within the triazene is instigated by UV light and is partially reversible dependent on the triazene substituent. The quinoline-substituted CAAC-triazene 1-Q has been applied as an L,L'-type ligand in the synthesis of [PdCl2(1-Q)], [PdCl(Me)(1-Q)] and [Pd(Me)(H2O(1-Q)]+. E-to-Z ligand isomerization also occurs when coordinated to PdCl2, providing access to on-metal manipulation. The cationic complex [PdMe(H2O)(1-Q)]+ is a precatalyst for oligomerization of ethylene to form initially 2-butene and subsequently linear and branched C8-C12 products from butene activation. Moreover, isomerization of 1-hexene takes place efficiently with exceptionally low catalyst loading (10 ppm) and up to 74,000 turnover numbers.

Fast Transfer of Triplet to Doublet Excitons from Organometallic Host to Organic Radical Semiconductors

Spin triplet exciton formation sets limits on technologies using organic semiconductors that are confined to singlet-triplet photophysics. In contrast, excitations in the spin doublet manifold in organic radical semiconductors can show efficient luminescence. Here the dynamics of the spin allowed process of intermolecular energy transfer from triplet to doublet excitons are explored. A carbene-metal-amide (CMA-CF3) is employed as a model triplet donor host, since following photoexcitation it undergoes extremely fast intersystem crossing to generate a population of triplet excitons within 4 ps. This enables a foundational study for tracking energy transfer from triplets to a model radical semiconductor, TTM-3PCz. Over 74% of all radical luminescence originates from the triplet channel in this system under photoexcitation. It is found that intermolecular triplet-to-doublet energy transfer can occur directly and rapidly, with 12% of triplet excitons transferring already on sub-ns timescales. This enhanced triplet harvesting mechanism is utilized in efficient near-infrared organic light-emitting diodes, which can be extended to other opto-electronic and -spintronic technologies by radical-based spin control in molecular semiconductors.

Pd8(PDip)6: Cubic, Unsaturated, Zerovalent

Atomically precise nanoclusters hold promise for supramolecular assembly and (opto)electronic- as well as magnetic materials. Herein, this work reports that treating palladium(0) precursors with a triphosphirane affords strongly colored Pd8(PDip)6 that is fully characterized by mass spectrometry, heteronuclear and Cross-Polarization Magic-Angle Spinning (CP-MAS) NMR-, infrared (IR), UV-vis, and X-ray photoelectron (XP) spectroscopies, single-crystal X-Ray diffraction (sc-XRD), mass spectrometry, and cyclovoltammetry (CV). This coordinatively unsaturated 104-electron Pd(0) cluster features a cubic Pd8-core, µ4-capping phosphinidene ligands, and is air-stable. Quantum chemical calculations provide insight to the cluster's electronic structure and suggest 5s/4d orbital mixing as well as minor Pd─P covalency. Trapping experiments reveal that cluster growth proceeds via insertion of Pd(0) into the triphosphirane. The unsaturated cluster senses ethylene and binds isocyanides, which triggers the rearrangement to a tetrahedral structure with a reduced frontier orbital energy gap. These experiments demonstrate facile cluster manipulation and highlight non-destructive cluster rearrangement as is required for supramolecular assembly.

New Pyridine Dicarbene Pincer Ligands with Ring Expanded NHCs and their Nickel and Chromium Complexes

The pincer complexes [NiIIBr(CNC)]Br (4), [CrIIIBr3(CNC)] (5 a) and [CrIIIBr2.3Cl0.7(CNC)] (5 b), where CNC=3,3'-(pyridine-2,6-diyl)bis(1-mesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene), were obtained from the novel ligand CNC, generated in situ from the precursor (CHNCH)Br2 and [NiIIBr2(PPh3)2] or from [CrII{N(SiMe3)2}2(THF)2] and (CHNCH)Br2 by aminolysis, respectively. The tetrahedrally distorted square planar (τ4≅0.30) geometry and the singlet ground state of Ni in 4 were attributed to steric constraints of the CNC backbone. Computational methods highlighted the dependence of the coordination geometry and the singlet-triplet energy difference on the size of the N-substituent of the tetrahydropyrimidine wingtips and contrasted it to the situation in 5-membered imidazolin-2-ylidene pincer analogues. The octahedral CrIII metal center in 5 a and 5 b is presumably formed after one electron oxidation from CH2Cl2. 4/MAO and 5 a/MAO were catalysts of moderate activity for the oligomerization and polymerization of ethylene, respectively. The analogous (CH^N^CH)Br2 precursor, where (CH^N^CH)=3,3'-(pyridine-2,6-diylbis(methylene))bis(1-mesityl-3,4,5,6-tetrahydropyrimidin-1-ium), was also prepared, however its coordination chemistry was not studied due to the inherent instability of the resulting free C^N^C ligand.

Expedient Synthesis of Thermally Stable Acyclic Amino(haloaryl)carbenes: Experimental and Theoretical Evidence of "Push-Pull" Stabilized Carbenes

A library of novel structurally related singlet carbenes, namely, acyclic amino(haloaryl)carbenes, was designed by a high-yielding two-step procedure, and their chemical stability explored both experimentally and theoretically. Thanks to a careful selection of both the amino and the aryl substitution pattern, these carbenes exhibit a wide range of stability and reactivity, spanning from rapid self-dimerization for carbenes featuring ortho-F substituents to very high chemical stability as bare carbenes, up to 60 °C for several hours for compounds carrying ortho-Br substituents. Their structure was determined through NMR and X-ray diffraction studies, and their reactivity evaluated in benchmark reactions, highlighting the ambiphilic character of this novel class of singlet carbenes. In contrast with previously reported aryl substituents incorporating o-CF3 and t-Bu groups, which were considered "spectator", the high chemical stability of some of these carbenes relates to the stabilization of the σ-orbital of the carbene center by the π-accepting haloaryl substituent through delocalization. Kinetic protection of the carbene center is also provided by the ortho-halogen atoms, as demonstrated computationally. This push-pull stabilization effect makes acyclic amino(haloaryl) carbenes among the most ambiphilic stable carbenes reported to date, holding promise for a variety of applications.

Molecular-strain induced phosphinidene reactivity of a phosphanorcaradiene

Phosphanorcaradienes are an appealing class of phosphorus compounds that can serve as synthons of transient phosphinidenes. However, the synthesis of such species is a formidable task owing to their intrinsic high reactivity. Herein we report straightforward synthesis, characterization and reactivity studies of a phosphanorcaradiene, in which one of the benzene rings in the flanking fluorenyl substituents is intramolecularly dearomatized through attachment to the phosphorus atom. It is facilely obtained by the reduction of phosphorus(III) dichloride precursor with potassium graphite. Despite being thermally robust, it acts as a synthetic equivalent of a transient phosphinidene. It reacts with trimethylphosphine and isonitrile to yield phosphanylidene-phosphorane and 1-phospha-3-azaallene, respectively. When it is treated with one and two molar equivalents of azide, iminophosphane and bis(imino)phosphane are isolated, respectively. Moreover, it is capable of activating ethylene and alkyne to afford [1 + 2] cycloaddition products, as well as oxidative cleavage of Si-H and N-H bonds to yield secondary phosphines. All the reactions proceed smoothly at room temperature without the presence of transition metals. The driving force for these reactions is most likely the high ring-constraint of the three-membered PC2 ring and recovery of the aromaticity of the benzene ring.

Carbene-Stabilized Phosphagermylenylidene: A Heavier Analog of Isonitrile

Phosphagermylenylidenes (R-P═Ge), as heavier analogs of isonitriles, whether in their free state or as complexes with a Lewis base, have not been previously identified as isolable entities. In this study, we report the synthesis of a stable monomeric phosphagermylenylidene within the coordination sphere of a Lewis base under ambient conditions. This species was synthesized by Lewis base-induced dedimerization of a cyclic phosphagermylenylidene dimer or via Me3SiCl elimination from a phosphinochlorogermylene framework. The deliberate integration of a bulky, electropositive N-heterocyclic boryl group at the phosphorus site, combined with coordination stabilization by a cyclic (alkyl)(amino)carbene at the low-valent germanium site, effectively mitigated its natural tendency toward oligomerization. Structural analyses and theoretical calculations have demonstrated that this unprecedented species features a P═Ge double bond, characterized by conventional electron-sharing π and σ bonds, complemented by lone pairs at both the phosphorus and germanium atoms. Preliminary reactivity studies show that this base-stabilized phosphagermylenylidene demonstrates facile release of ligands at the Ge atom, coordination to silver through the lone pair on P, and versatile reactivity including both (cyclo)addition and cleavage of the P═Ge double bond.

Redox- and Charge-State Dependent Trends in 5, 6, and 7-Membered Boron Heterocycles: A Neutral Ligand Coordination Chemistry Approach to Boracyclic Cations, Anions, and Radicals

ConspectusBoron heterocycles represent an important subset of heteroatom-incorporated rings, attracting attention from organic, inorganic, and materials chemists. The empty pz orbital at the boron center makes them stand out as quintessential Lewis acidic molecules, also serving as a means to modulate electronic structure and photophysical properties in a facile manner. As boracycles are ripe for extensive functionalization, they are used in catalysis, chemical biology, materials science, and continue to be explored as chemical synthons for conjugated materials and reagents. Neutral boron(III)-incorporated polycyclic molecules are some of the most studied types of boracycles, and understanding their redox transformations is important for applications relying on electron transfer and charge transport. While relevant redox species can often be electrochemically observed, it remains challenging to isolate and characterize boracycles where the boron center and/or polycyclic skeleton have been chemically reduced.We describe our recent work isolating 5-, 6-, and 7-membered boracyclic radicals, anions, and cations, focusing on stabilization strategies, ligand-mediated bonding situations, and reactivity. We present a versatile neutral ligand coordination chemistry approach that permits the transformation of boracycles from potent electrophiles to powerful nucleophilic heterocycles that facilitate diverse electron transfer and bond activation chemistry. Although there are a wide range of suitable stabilizing ligands, we have employed both diamino-N-heterocyclic carbenes (NHCs) and cyclic(alkyl)(amino) carbenes (CAACs), which led to boracycles with tunable electronic structures and aromaticity trends. We highlight successful isolation of borafluorene radicals and demonstrate their reversible redox behavior, undergoing oxidation to the cation or reduction to the anion. The borafluorene anion is a chemical synthon that has been used to prepare boryl main-group and transition-metal bonds, luminescent oxabora-spirocycles, borafluorenate-crown ethers, and CO-releasing molecules via carbon dioxide activation. We expanded to 6-membered boracycles and characterized neutral bis(NHC-supported 9-boraphenanthrene)s and the corresponding bis(CAAC-stabilized 9-boraphenanthrene) biradical. We detail the interconvertible multiredox states of boraphenalene, where the boraphenalenyl radical, anion, and cation mimic the charge-states of the all-hydrocarbon analogue. Reactivity studies of the boraphenalenyl anion displayed unusual nucleophilic reactivity at multiple sites on the periphery of the boraphenalenyl tricyclic scaffold. Reduced borepins, 7-membered boron containing heterocycles, have also been isolated. We used a stepwise one-pot synthesis combining the halo-borepin precursor, CAAC, and KC8 to afford the monomeric borepin radicals and anions. The π-system was extended to contain two borepin rings fused in a pentacyclic scaffold, which permitted isolation of diborepin biradicals and a diborepin containing a dibora-quinone core.Our goal is to provide a guide explaining the current structure-function trends and isolation strategies for redox-active boron-incorporated polycyclic molecules to initiate the rational design and use of these types of compounds across a vast chemical space.

Synthesis and Reactivity of a Dialane-Bridged Diradical

Radicals of the lightest group 13 element, boron, are well established and observed in numerous forms. In contrast to boron, radical chemistry involving the heavier group 13 elements (aluminum, gallium, indium, and thallium) remains largely underexplored, primarily attributed to the formidable synthetic challenges associated with these elements. Herein, we report the synthesis and isolation of planar and twisted conformers of a doubly CAAC (cyclic alkyl(amino)carbene)-radical-substituted dialane. Extensive characterization through spectroscopic analyses and X-ray crystallography confirms their identity, while quantum chemical calculations support their open-shell nature and provide further insights into their electronic structures. The dialane-connected diradicals exhibit high susceptibility to oxidation, as evidenced by electrochemical measurements and reactions with o-chloranil and a variety of organic azides. This study opens a previously uncharted class of dialuminum systems to study, broadening the scope of diradical chemistry and its potential applications.

An isolable, chelating bis[cyclic (alkyl)(amino)carbene] stabilizes a strongly bent, dicoordinate Ni(0) complex

Chelating ligands have had a tremendous impact in coordination chemistry and catalysis. Notwithstanding their success as strongly σ-donating and π-accepting ligands, to date no chelating bis[cyclic (alkyl)(amino)carbenes] have been reported. Herein, we describe a chelating, C2-symmetric bis[cyclic (alkyl)(amino)carbene] ligand, which was isolated as a racemic mixture. The isolation and structural characterization of its isostructural, pseudotetrahedral complexes with iron, cobalt, nickel, and zinc dihalides featuring eight-membered metallacycles demonstrates the binding ability of the bis(carbene). Reduction of the nickel(II) dibromide with potassium graphite produces a dicoordinate nickel(0) complex that features one of the narrowest angles measured in any unsupported dicoordinate transition metal complexes.

Recent advances in the chemistry of isolable carbene analogues with group 13-15 elements

Carbenes (R2C:), compounds with a divalent carbon atom containing only six valence shell electrons, have evolved into a broader class with the replacement of the carbene carbon or the RC moiety with main group elements, leading to the creation of main group carbene analogues. These analogues, mirroring the electronic structure of carbenes (a lone pair of electrons and an empty orbital), demonstrate unique reactivity. Over the last three decades, this area has seen substantial advancements, paralleling the innovations in carbene chemistry. Recent studies have revealed a spectrum of unique carbene analogues, such as monocoordinate aluminylenes, nitrenes, and bismuthinidenes, notable for their extraordinary properties and diverse reactivity, offering promising applications in small molecule activation. This review delves into the isolable main group carbene analogues that are in the forefront from 2010 and beyond, spanning elements from group 13 (B, Al, Ga, In, and Tl), group 14 (Si, Ge, Sn, and Pb) and group 15 (N, P, As, Sb, and Bi). Specifically, this review focuses on the potential amphiphilic species that possess both lone pairs of electrons and vacant orbitals. We detail their comprehensive synthesis and stabilization strategies, outlining the reactivity arising from their distinct structural characteristics.

Cyclic (Alkyl)(Amino)Carbene-Iminoboryl Compounds with Three Formal Oxidation States

BN/CC isosterism is an effective strategy to build hybrid functional molecules with unique properties. In contrast to the alkynyl iminium salts derived from cyclic (alkyl)(amino)carbenes (CAACs) that feature only one reversible reduction wave, the isoelectronic cationic CAAC-iminoboryl adducts could be singly and doubly reduced smoothly. Both the resultant neutral radical and anionic azaborataallenes bear NBC-mixed allenic structures. The former radical has a high spin-density of 0.55e at CCAAC carbon, yet exhibits formal boron-centered radical reactivity. The latter azaborataallenes feature the nucleophilic CCAAC center and polar N(δ-)═B(δ+)═C(δ-) unit, and readily undergo nucleophilic substitution, isocyanide insertion, dipolar addition and cycloaddition reactions etc. The N-substituents have been shown to have a significant influence on the solid-state structure, thermal stability, and reactivity of azaborataallenes. This work showcases the allenic BN-unsaturated species as versatile building blocks in organic synthesis.

Access to a peri-Annulated Aluminium Compound via C-H Bond Activation by a Cyclic Bis-Aluminylene

Carbocyclic aluminium halides [(ADC)AlX2]2 (2-X) (X=F, Cl, and I) based on an anionic dicarbene (ADC=PhC{N(Dipp)C}2, Dipp = 2,6-iPr2C6H3) framework are prepared as crystalline solids by dehydrohalogenations of the alane [(ADC)AlH2]2 (1). KC8 reduction of 2-I affords the peri-annulated Al(III) compound [(ADCH)AlH]2 (4) (ADCH=PhC{N(Dipp)C2(DippH)N}, DippH=2-iPr,6-(Me2C)C6H3)) as a colorless crystalline solid in 76 % yield. The formation of 4 suggests intramolecular insertion of the putative bis-aluminylene species [(ADC)Al]2 (3) into the methine C-H bond of HCMe2 group. Calculations predict singlet ground state for 3, while the conversion of 3 into 4 is thermodynamically favored by 61 kcal/mol. Compounds 2-F, 2-Cl, 2-I, and 4 have been characterized by NMR spectroscopy and their solid-state molecular structures have been established by single crystal X-ray diffraction.

Screening seven-electron boron-centered radicals for dinitrogen activation

The activation of dinitrogen is significant as nitrogen-containing compounds play an important role in industries. However, the inert NN triple bond caused by its large HOMO-LUMO gap (10.8 eV) and high bond dissociation energy (945 kJ mol-1 ) renders its activation under mild conditions particularly challenging. Recent progress shows that a few main group species can mimic transition metal complexes to activate dinitrogen. Here, we demonstrate that a series of seven-electron (7e) boron-centered radical can be used to activate N2 via density functional theory calculations. It is found that boron-centered radicals containing amine ligand perform best on the thermodynamics of dinitrogen activation. In addition, when electron-donating groups are introduced at the boron atom, these radicals can be used to activate N2 with low reaction barriers. Further analysis suggests that the electron transfer from the boron atom to the π* orbitals of dinitrogen is essential for its activation. Our findings suggest great potential of 7e boron radicals in the field of dinitrogen activation.

IZCp and PZCp: Redox Non-innocent Cyclopentadienyl Ligands as Electron Reservoirs for Sandwich Complexes

A long-sustained effort of systematic steric and electronic modification of cyclopentadienyl (Cp) ligands has enabled them to find wide-ranging, valuable applications. Herein, we present two novel Cp ligands: imidazolium- and pyrrolinium-substituted zwitterionic Cps (IZCp and PZCp), whose key utility is redox non-innocence─the ability to participate cooperatively with the metal center in redox reactions. Through the simple metalation of ZCps, the Cr(0) and Mo(0) half-sandwich complexes (IZCp)Cr(CO)3, (PZCp)Cr(CO)3, (IZCp)Mo(CO)3, and (PZCp)Mo(CO)3, respectively, as well as the Ru(II) sandwich complexes [(IZCp)RuCp]PF6 and [(PZCp)RuCp]PF6 were prepared. The sandwich complexes were fully characterized and showed by cyclic voltammetry reversible one-electron reduction at E1/2 potentials ranging from -1.7 to -2.7 V vs Fc/Fc+. These values are unusually low and have not been observed with other Cp ligands due to the instability of the reduced complexes. Density functional theory (DFT) calculations for the reduced sandwich derivatives with IZCp and PZCp showed their spin densities to be highly delocalized over their ZCp ligand moieties (70-90%). Electron paramagnetic resonance (EPR) analysis of the isolated K[(PZCp)Mo(CO)3] and (PZCp)RuCp also indicated a high degree of ligand-localized radical character. Thus, the IZCp and PZCp ligands act as electron reservoirs to sustain these sandwich complexes in highly reduced states. At the same time, the CO stretching frequencies of K[(PZCp)Mo(CO)3]: νCO 1871, 1748, and 1699 cm-1, rank the [PZCp]- ligand as the strongest electron-donating Cp ligand among the reported CpMo(CO)3 derivatives, whose νCO > 1746 cm-1. In addition, these redox non-innocent Cps were obtained in high yields and found to be practically air- and moisture-stable, unlike typical Cps.

Sequential radical and cationic reactivity at separated sites within one molecule in solution

Distonic radical cations (DRCs) with spatially separated charge and radical sites are expected to show both radical and cationic reactivity at different sites within one molecule. However, such "dual" reactivity has rarely been observed in the condensed phase. Herein we report the isolation of crystalline 1λ2,3λ2-1-phosphonia-3-phosphinyl-cyclohex-4-enes 2a,b˙+, which can be considered delocalized DRCs and were completely characterized by crystallographic, spectroscopic, and computational methods. These DRCs contain a radical and cationic site with seven and six valence electrons, respectively, which are both stabilized via conjugation, yet remain spatially separated. They exhibit reactivity that differs from that of conventional radical cations (CRCs); specifically they show sequential radical and cationic reactivity at separated sites within one molecule in solution.

Boosting the π-Acceptor Property of Mesoionic Carbenes by Carbonylation with Carbon Monoxide

We report the room temperature dimerization of carbon monoxide mediated by C4/C5-vicinal anionic dicarbenes Li(ADC) (ADC = ArC{(Dipp)NC}2 ; Dipp = 2,6-iPr2 C6 H3 ; Ar = Ph, DMP (4-Me2 NC6 H4 ), Bp (4-PhC6 H4 )) to yield (E)-ethene-1,2-bis(olate) (i.e. - O-C=C-O- = COen ) bridged mesoionic carbene (iMIC) lithium compounds COen -[(iMIC)Li]2 (COen -[iMIC]2 = [ArC{(Dipp)NC}2 (CO)]2 ) in quantitative yields. COen -[(iMIC)Li]2 are highly colored stable solids, exhibit a strikingly small HOMO-LUMO energy gap, and readily undergo 2e-oxidations with selenium, CuCl (or CuCl2 ), and AgCl to afford the dinuclear compounds COon -[(iMIC)E]2 (E = Se, CuCl, AgCl) featuring a 1,2-dione bridged neutral bis-iMIC (i.e. COon -[iMIC]2 = [ArC{(Dipp)NC}2 (C=O)]2 ). COen -[(iMIC)Li]2 undergo redox-neutral salt metathesis reactions with LiAlH4 and (Et2 O)2 BeBr2 and afford COen -[(iMIC)AlH2 ]2 and COen -[(iMIC)BeBr]2 , in which the dianionic COen -moiety remains intact. All compounds have been characterized by NMR spectroscopy, mass spectrometry, and X-ray diffraction. Stereoelectronic properties of COon -[iMIC]2 are quantified by experimental and theoretical methods.

Cyclic (amino)(barrelene)carbene Ru-complexes: synthesis and reactivity in olefin metathesis

The synthesis of ruthenium-complexes with cyclic (amino)(barrelene)carbenes (namely CABCs) as ligands is reported. Isolated in moderate to good yields, these new complexes showed impressive thermal stability at 110 °C over several days. Good catalytic performances were demonstrated in various ring-closing metathesis (RCM), macrocyclic-RCM, ring-closing enyne metathesis (RCEYM), cross-metathesis (CM), and ring-opening cross metathesis (ROCM) reactions.

Ambiphilicity of ring-expanded N-heterocyclic carbenes

N-heterocyclic carbenes, such as imidazole-2-ylidenes and imidazolin-2-ylidenes, the popular class of singlet carbenes introduced by Arduengo in 1991 have not been shown to be ambiphilic owing to the two σ-withdrawing, π-donating amino groups flanking the carbene centre. However, our experimental data suggest that ring-expanded N-heterocyclic carbenes (RE-NHCs), especially the seven and eight membered rings, are significantly ambiphilic. Our results also show that the steric environment in RE-NHCs can become a determining factor for controlling the E-H bond activation.

Cyclic Hydrocarbon Frameworks Containing Two Bismuth Atoms: Towards 9,10-Dibismaanthracene

When bismuth atoms are incorporated into cyclic organic systems, this commonly goes along with strained or distorted molecular geometries, which can be exploited to modulate the physical and chemical properties of these compounds. In six-membered heterocycles, bismuth atoms are often accompanied by oxygen, sulfur or nitrogen as a second hetero-element. In this work, we present the first examples of six-membered rings, in which two CH units are replaced by BiX moieties (X=Cl, Br, I), resulting in dihydro-anthracene analogs. Their behavior in chemically reversible reduction reactions is explored, aiming at the generation of dibisma-anthracene (bismanthrene). Heterometallic compounds (Bi/Fe, Bi/Mn) are introduced as potential bismanthrene surrogates, as supported by bismanthrene-transfer to selenium. Analytical techniques used to investigate the reported compounds include NMR spectroscopy, high-resolution mass spectrometry, single-crystal X-ray diffraction analyses, and DFT calculations.

Bis-[cyclic(alkyl)(amino)carbene]-derived diradicals

Crystalline polymeric structures of trans-1,4-cyclohexylene bridged N-tethered bis-CAACs in the form of their LiOTf adducts were synthesized and isolated. These were further used as building blocks for the synthesis of crystalline (amino)(carboxy)-based diradicals. The triplet diradical character of these compounds was unambiguously confirmed by the presence of a half-field signal in their EPR spectra. Theoretical calculations show that the singlet state is marginally more stable than the triplet state.

1H-1,2,3-Triazol-5-ylidenes as Catalytic Organic Single-Electron Reductants

Most of the known single-electron reductants are either metal based reagents, used in a stoichiometric amount, or a combination of an organic species and a photocatalyst. Here we report that 1H-1,2,3-triazol-5-ylidenes act not only as stoichiometric one-electron donors but also as catalytic organic reducing agents, without the need of a photocatalyst. As a proof of concept, we studied the reduction of quinones, which are well-known electron conveyors that are involved in various biological and industrial processes. This work also provides experimental evidence for the formation of a bis(triazolium)carbonate adduct, which acts as the resting state of the catalytic cycle and as the carbene reservoir.

Isolation of an Anionic Dicarbene Embedded Sn2 P2 Cluster and Reversible CO2 Uptake

Decarbonylation of a cyclic bis-phosphaethynolatostannylene [(ADC)Sn(PCO)]2 based on an anionic dicarbene framework (ADC = PhC{N(Dipp)C}2 ; Dipp = 2,6-iPr2 C6 H3 ) under UV light results in the formation of a Sn2 P2 cluster compound [(ADC)SnP]2 as a green crystalline solid. The electronic structure of [(ADC)SnP]2 is analyzed by quantum-chemical calculations. At room temperature, [(ADC)SnP]2 reversibly binds with CO2 and forms [(ADC)2 {SnOC(O)P}SnP]. [(ADC)SnP]2 enables catalytic hydroboration of CO2 and reacts with elemental selenium and Fe2 (CO)9 to afford [(ADC)2 {Sn(Se)P2 }SnSe] and [(ADC)Sn{Fe(CO)4 }P]2 , respectively. All compounds are characterized by multinuclear NMR spectroscopy and their solid-state molecular structures are determined by single-crystal X-ray diffraction.

%VBur index and steric maps: from predictive catalysis to machine learning

Steric indices are parameters used in chemistry to describe the spatial arrangement of atoms or groups of atoms in molecules. They are important in determining the reactivity, stability, and physical properties of chemical compounds. One commonly used steric index is the steric hindrance, which refers to the obstruction or hindrance of movement in a molecule caused by bulky substituents or functional groups. Steric hindrance can affect the reactivity of a molecule by altering the accessibility of its reactive sites and influencing the geometry of its transition states. Notably, the Tolman cone angle and %VBur are prominent among these indices. Actually, steric effects can also be described using the concept of steric bulk, which refers to the space occupied by a molecule or functional group. Steric bulk can affect the solubility, melting point, boiling point, and viscosity of a substance. Even though electronic indices are more widely used, they have certain drawbacks that might shift preferences towards others. They present a higher computational cost, and often, the weight of electronics in correlation with chemical properties, e.g. binding energies, falls short in comparison to %VBur. However, it is worth noting that this may be because the steric index inherently captures part of the electronic content. Overall, steric indices play an important role in understanding the behaviour of chemical compounds and can be used to predict their reactivity, stability, and physical properties. Predictive chemistry is an approach to chemical research that uses computational methods to anticipate the properties and behaviour of these compounds and reactions, facilitating the design of new compounds and reactivities. Within this domain, predictive catalysis specifically targets the prediction of the performance and behaviour of catalysts. Ultimately, the goal is to identify new catalysts with optimal properties, leading to chemical processes that are both more efficient and sustainable. In this framework, %VBur can be a key metric for deepening our understanding of catalysis, emphasizing predictive catalysis and sustainability. Those latter concepts are needed to direct our efforts toward identifying the optimal catalyst for any reaction, minimizing waste, and reducing experimental efforts while maximizing the efficacy of the computational methods.

A stable rhodium-coordinated carbene with a σ0π2 electronic configuration

Isolable singlet carbenes have universally adopted a σ2π0 electronic state, making them σ-donors and π-acceptors. We present a rhodium-coordinated, cationic cyclic diphosphinocarbene with a σ0π2 ground state configuration. Nuclear magnetic resonance spectroscopy studies show a carbene carbon chemical shift below -30.0 parts per million. X-ray crystallography reveals a planar RhP2C configuration. Quantum chemical calculations rationalize how σ-electron delocalization/donation and π-electron negative hyperconjugation together stabilize the formally vacant σ orbital and the filled π orbital at the carbene center. In contrast to traditional carbene counterparts this carbene can undergo synthetic transformations with both a Lewis base and a silver salt, producing a Lewis acid/base adduct and a silver π-complex, respectively. Exhibiting ambiphilic reactivity, it can also form a ketenimine through reaction with an isocyanide.

Aldiminium and 1,2,3-triazolium dithiocarboxylate zwitterions derived from cyclic (alkyl)(amino) and mesoionic carbenes

The synthesis of zwitterionic dithiocarboxylate adducts was achieved by deprotonating various aldiminium or 1,2,3-triazolium salts with a strong base, followed by the nucleophilic addition of the in situ-generated cyclic (alkyl)(amino) or mesoionic carbenes (CAACs or MICs) onto carbon disulfide. Nine novel compounds were isolated and fully characterized by 1H and 13C NMR, FTIR, and HRMS techniques. Moreover, the molecular structures of two CAAC·CS2 and two MIC·CS2 betaines were determined by X-ray diffraction analysis. The analytical data recorded for all these adducts were compared with those reported previously for related NHC·CS2 betaines derived from imidazolinium or (benz)imidazolium salts. Due to the absence of electronic communication between the CS2 unit and the orthogonal heterocycle, all the CAAC·CS2, MIC·CS2, and NHC·CS2 zwitterions displayed similar electronic properties and featured the same bite angle. Yet, their steric properties are liable to ample modifications by varying the exact nature of their cationic heterocycle and its substituents.

Mono(Lewis Base)-Stabilized Gallium Iodide: An Unexplored Class of Promising Ligands

Quantum-chemical (DFT) calculations on hitherto unknown base(carbene)-stabilized gallium monoiodides (LB→GaI) suggest that these systems feature one lone pair of electrons and a formally vacant p-orbital - both centered at the central gallium atom - and exhibit metallomimetic behavior. The calculated reaction free energies as well as bond dissociation energies suggest that these LB→GaI systems are capable of forming stable donor-acceptor complexes with group 13 trichlorides. Examination of the ligand exchange reactions with iron and nickel complexes indicates their potential use as ligands in transition metal chemistry. In addition, it is found that the title compounds are also able to activate various enthalpically robust bonds. Further, a detailed mechanistic investigation of these small molecule activation processes reveals the non-innocent behavior of the carbene (base) moiety attached to the GaI fragment, thereby indicating the cooperative nature of these bond activation processes. The energy decomposition analysis (EDA) and activation strain model (ASM) of reactivity were also employed to quantitatively understand and rationalize the different activation processes.

Accessing Ta/Cu Architectures via Metal-Metal Salt Metatheses: Heterobimetallic C-H Bond Activation Affords μ-Hydrides

We employ a metal-metal salt metathesis strategy to access low-valent tantalum-copper heterometallic architectures (Ta-μ2 -H2 -Cu and Ta-μ3 -H2 -Cu3 ) that emulate structural elements proposed for surface alloyed nanomaterials. Whereas cluster assembly with carbonylmetalates is well precedented, the use of the corresponding polyarene transition metal anions is underexplored, despite recognition of these highly reactive fragments as storable sources of atomic Mn- . Our application of this strategy provides structurally unique early-late bimetallic species. These complexes incorporate bridging hydride ligands during their syntheses, the origin of which is elucidated via detailed isotopic labelling studies. Modification of ancillary ligand sterics and electronics alters the mechanism of bimetallic assembly; a trinuclear complex resulting from dinuclear C-H activation is demonstrated as an intermediate en route to formation of the bimetallic. Further validating the promise of this rational, bottom-up approach, a unique tetranuclear species was synthesized, featuring a Ta centre bearing three Ta-Cu interactions.

Bicyclic (alkyl)(amino)carbene (BICAAC)-supported phosphinidenes

Herein, the synthesis and characterization of bicyclic (alkyl)(amino)carbene (BICAAC)-stabilized phosphinidenes (1-4) are reported. Compounds 1-3 were obtained by reacting trihalophosphine [PX3, X = Cl (1), Br (2), I (3)] with BICAAC in THF. A BICAAC-stabilized bis-phosphinidene (4) was obtained from the reduction of compound 2. All four compounds were characterized by X-ray crystallography and heteronuclear NMR spectroscopy. Theoretical calculations indicated the predominant C(carbene)P double bond characteristic in compounds 1-4.

Utilizing bis(imino)dihydroacridanide pincer ligands in p-block chemistry: synthesis and catalysis of an antimony monocation salt

We present the synthesis and characterization of an Sb(III) monocation salt stabilized by a bulky bis(imino)dihydroacridanide pincer ligand. The Lewis acidity of the Sb cation is quantified using the Guttmann-Beckett method and confirmed by its reaction with 4-dimethylaminopyridine, which forms a Lewis acid-base adduct. This Sb cation exhibits catalytic activity in the cyanosilylation of arylketones. The electronic structure of the Sb cation as well as the mechanism of the catalytic transformation are explored by density functional theory computations.