Highly Elastic Organic Crystals for Flexible Optical Waveguides

Efficient Aerial Water Harvesting with Self-Sensing Dynamic Janus Crystals

Water scarcity is one of the most pressing issues of contemporary societal development that requires innovative technologies where the material not only harvests water but also plays an active role in the process. Here, we demonstrate a highly efficient optical self-sensing approach to humidity capture from the air, where both humidity-harvesting and water-transduction functionalities are imparted on slender organic crystals by partial silanization via layer-by-layer hybridization. We report that due to the integration of the harvesting of aerial moisture and the collection of the condensed water, the ensuing Janus-type crystals capture humidity with the highest-to-date water collection efficiency of 15.96 ± 0.63 g cm-2 h-1. The water-collecting elements are also capable of delivering the water by reversible and periodic elastic deformation, and their high optical transparency allows real-time monitoring of the periodic fog collection process by deformational modulation of passively or actively transduced light that outcouples at the crystal-droplet interface. The results could inspire sophisticated approaches to humidity harvesting where optically transparent crystals combine fog capture with self-sensing capabilities for continuous and optimized operation to maximize the cost-gain balance of aerial fog capture.

Cornu-Spiral-Like Organic Crystal Waveguide Providing Discriminatory Optical Pathway for Smart Organic Photonic Circuit

In the era of artificial intelligence, developing advanced and intelligent photonic circuits has become essential. In this work, the fabrication of a smart organic photonic circuit (OPC), is illustrated which utilizes a Cornu-spiral-like waveguide (CSW) to produce discriminating optical pathways in the circuit. The mechanical flexibility of Schiff base, (E)-1-(((5-iodopyridin-2-yl)imino)methyl)naphthalen-2-ol (IPyIN) facilitates the fabrication of a first-of-its-kind, two-ring-based CSW via the atomic force microscopy cantilever tip-assisted mechanophotonics approach. The photonic studies suggest that the CSW structure routes optical signals in discriminating trajectories. To capitalize on the discriminatory properties of the CSW, two linear waveguides onto both rings of the CSW are integrated to create a smart OPC. This smart OPC can selectively route optical signals either partially or fully in the circuit, depending on the pathways determined by the CSW, thus enabling the circuit to switch ON or OFF. Such intelligent photonic circuits are essential for advancing smart technologies.

Tension Induced Photoluminescence Enhancement in an Organic Single Crystal

Organic single crystals possess distinct advantages due to their highly ordered molecular structures, resulting in improved stability, enhanced carrier mobility, and superior optical characteristics. However, their mechanical rigidity and brittleness impede the applications in flexible and wearable optoelectronic devices. Here, photoluminescence (PL) emission from 2,6-diphenylanthracene (DPA) single crystals is studied under tensile strain, which shows PL enhancement by more than two times with a strain of ≈1.42%. Such a tension induced PL enhancement is reversible, exhibiting no clear optical degradations during 100 cycles of bending and recovery processes. Theoretical calculations reveal that the deformation of molecular structure under strain induces a decrease of the dihedral between anthracene and benzene moieties in DPA molecules. Further, the increased molecular conjugation enhances the molecular oscillator strength, leading to the brightened PL emission. Meanwhile, with the decreased dihedral, the molecular vibrations in DPA crystals are suppressed, which can reduce the non-radiative decay rate. In contrast, no tension induced PL enhancement is observed in polycrystalline DPA thin films as the strain can be released via the grain boundaries. This study highlights the superior optical performance of DPA single crystals under strain field, which will provide new possibilities for DPA-based flexible devices.

Capturing the Interplay Between TADF and RTP Through Mechanically Flexible Polymorphic Optical Waveguides

Polymorphism plays a pivotal role in generating a range of crystalline materials with diverse photophysical and mechanical attributes, all originating from the same molecule. Here, we showcase two distinct polymorphs: green (GY) emissive and orange (OR) emissive crystals of 5'-(4-(diphenylamino)phenyl)-[2,2'-bithiophene]-5-carbaldehyde (TPA-CHO). These polymorphs display differing optical characteristics, with GY exhibiting thermally activated delayed fluorescence (TADF) and OR showing room temperature phosphorescence (RTP). Additionally, both polymorphic crystals display mechanical flexibility and optical waveguiding capabilities. Leveraging the AFM-tip-based mechanophotonics technique, we position the GY optical waveguide at varying lengths perpendicular to the OR waveguide. This approach facilitates the exploration of the interplay between TADF and RTP phenomena by judiciously controlling the optical path length of crystal waveguides. Essentially, our approach provides a clear pathway for understanding and controlling the photophysical processes in organic molecular crystals, paving the way for advancements in polymorphic crystal-based photonic circuit technologies.

Flexible organic crystals with multi-stimuli-responsive CPL for broadband multicolor optical waveguides

Flexible organic crystals, capable of transmitting light and responding to various external stimuli, are emerging as a new frontier in optoelectronic materials. They hold immense potential for applications in molecular machines, sensors, displays, and intelligent devices. Here, we report on flexible organic crystals based on single-component enantiomeric organic compounds, demonstrating multi-stimuli-responsive circularly polarized light (CPL). These crystals exhibit remarkable elasticity, responsiveness to light and acid vapors, and tunable circularly polarized optical signals. Upon exposure to acid vapors, the fluorescence of the crystals shifts from initial yellow emission to green emission, attributable to the protonation-induced inhibition of excited-state intramolecular proton transfer. Under UV irradiation, the fluorescence emission undergoes a red-shift, resulting from the molecular transformation from an enol configuration to a ketone configuration. Notably, both processes are reversible and can be restored under daylight. The integration of reversible fluorescence changes under light and acid vapors stimuli, CPL signals, and flexible optical waveguides within a single crystal paves the way for the application of organic crystals as all-organic chiral functional materials.

Ultra-Wide Modulation and Reversible Reconfiguration of a Flexible Organic Crystalline Optical Waveguide Between 645 and 731 nm

Flexible organic crystalline optical waveguides, which deliver input or self-emit light through various dynamic organic crystals, have attracted increasing attention in the past decade. However, the modulation of the waveguide output relies on chemical design and substituent modification, being time-consuming and laborious. Here we report an elastic organic crystal that displays long-distance light transduction up to 2.0 cm and an ultra-wide modulation of crystalline optical waveguides between red (645 nm) and near infrared (731 nm) in both the pristine and the elastically bent states based on a pre-designed self-absorption effect. The flexible organic crystalline optical waveguides can be precisely and reversibly reconfigured by controlling the irradiation point. In addition, deep-red amplified spontaneous emission (ASE) that is able to transduce through a 5.0 mm bent crystal with an ultra-low optical loss coefficient of 0.093 dB/mm has been attained. To the best of our knowledge, this is the first report of flexible organic ASE waveguides. The present study not only provides a simple yet effective strategy to remarkably modulate flexible organic crystalline optical waveguides but also demonstrates the superiority of lasing over normal emission as flexible optical communication elements.

Circularly Polarized Lasing from Helical Superstructures of Chiral Organic Molecules

Chiral supramolecular aggregates have the potential to explore circularly polarized lasing with large dissymmetry factors. However, the controllable assembly of chiral superstructures towards deterministic circularly polarized laser emission remains elusive. Here, we design a pair of chiral organic molecules capable of stacking into a pair of definite helical superstructures in microcrystals, which enables circularly polarized lasing with deterministic chirality and high dissymmetry factors. The microcrystals function as optical cavities and gain media simultaneously for laser oscillations, while the supramolecular helices endow the laser emission with strong and opposite chirality. As a result, the microcrystals of two enantiomers allow for circularly polarized laser emission with opposite chirality and high dissymmetry factors up to ~1.0. This work demonstrates the chiral supramolecular assemblies as an excellent platform for high-performance circularly polarized lasers.

Low-Temperature Flexibility of Chiral Organic Crystals with Highly Efficient Second-Harmonic Generation

Flexible crystals with unique mechanical properties have presented potential for applications in optoelectronics, soft robotics and sensors. However, there have been no reports of low-temperature-resistant flexible crystals with second-order nonlinear optical properties (NLO). Here, we report flexible chiral Schiff-base crystals capable of efficient second harmonic generation (SHG). Both enantiomers and the racemic form of these crystals are mechanically flexible in two directions at both room temperature and at 77 K, although their mechanical responses differ. The enantiomers display SHG with an intensity of up to 12 times that of potassium dihydrogenphosphate (KDP) when pumped at 980 nm, and they also have high laser-induced damage thresholds (LDT). Even when bent, the crystals retain strong second harmonic generation, although with a different intensity distribution depending on the polarization, compared to when they are straight. This work describes the first instance of flexible organic single-crystalline material with NLO properties and lays the foundation for the development of mechanically flexible organic NLO materials.

Conformation-Confined Organic Butterfly-Molecule with High Photoluminescence Efficiency, Deep-Blue Amplified Spontaneous Emission, and Unique Piezochromic Luminescence

Organic fluorophores with tunable π-conjugated paths have attracted considerable attention owing to their diverse properties and promising applications. Herein, we present a tailored butterfly-like molecule, 2,2'-(2,5-bis (2,2-diphenylvinyl)-1,4-phenylene)dinaphthalene (BDVPN), which exhibits diverse photophysical features in its two polymorphs. The BP phase crystal, with its "aligned wings" conformation, possesses emissive characteristics that are nearly identical to those in dilute solutions. In contrast, the BN phase crystal, which adopts an "orthogonal wings" conformation, exhibits an unusual hypsochromic-shifted emission compared to its dilute solution counterparts. This intriguing hypsochromic-shifted emission originates from the reduction in the effective conjugated length of the molecular skeleton. Notably, BN phase crystals also exhibit exceptional optical performance, featuring high-efficiency emission (76.6 %), low-loss optical waveguides (0.571 dB mm-1), deep-blue amplified spontaneous emission (ASE) with narrow full width at half maximum (FWHM: 6.4 nm), and a unique 200 nm bathochromic shift of piezochromic luminescence.

Study of Nonlinear Optical Properties of a Self-Healing Organic Crystal

Recently a noncentrosymmetric single crystal of a dibenzoate derivative, namely, dimethyl-4,4'-(methylenebis(azanediyl))dibenzoate, with second harmonic generation activities at 405 nm and ultrafast self-healing activity was reported by Mondal et al. in Nature Communications in 2023. Here, the linear and nonlinear optical properties of this notable molecular crystal were simulated using 1,611,464 atoms in the Supermolecule approach at the DFT/CAM-B3LYP/aug-cc-pVTZ level. Our results for the second order nonlinear optical properties of dimethyl-4,4'-(methylenebis(azanediyl))dibenzoate show that the second harmonic generation is more significant at 532 nm. In addition, the density functional theory calculations of the electro-optical parameters for the crystals in the pristine state and after the fracture mechanical self-healing process show small differences, confirming the efficiency of the self-healing process. Additionally, the crystal displays significant third-order nonlinear optical properties, particularly pronounced at a shorter wavelength of 330 nm. Thus, the self-healing dimethyl-4,4'-(methylenebis(azanediyl))dibenzoate crystal shows relevant second and third order nonlinear optical properties which make it a very interesting material for optical applications.

Multicolor Electrochemiluminescence of Binary Microcrystals of Iridium and Ruthenium Complexes

We here report the multicolor electrochemiluminescence (ECL) of binary microcrystals prepared from a blue-emissive iridium complex 1 and an orange-emissive ruthenium complex 2. These materials display a plate-like morphology with high crystallinity, as demonstrated by microscopic and powder X-ray diffraction analyses. Under light excitation, these microcrystals exhibit gradient emission color changes as a result of the efficient energy transfer between two complexes. When modified on glass carbon electrodes, these microcrystals exhibit tunable ECLs with varied emission colors including sky-blue, white, orange, and red, depending on the doping ratio of complex 2 and the applied potential. Furthermore, organic amines with different molecular sizes are used as the co-reactant to examine their influences on the ECL efficiency of the porous microcrystals of 1. The analysis on the luminance and RGB values of ECL suggests the existence of energy transfer in the generation of multicolor ECLs in these binary crystals.

Spatially controllable and mechanically switchable isomorphous organoferroeleastic crystal optical waveguides and networks

The precise, reversible, and diffusionless shape-switching ability of organic ferroelastic crystals, while maintaining their structural integrity, positions them as promising materials for next-generation hybrid photonic devices. Herein, we present versatile bi-directional ferroelasticity and optical waveguide properties of three isomorphous, halogen-based, Schiff base organic crystals. These crystals exhibit sharp bending at multiple interfaces driven by molecular movement around the CH = N bond and subsequent 180° rotational twinning, offering controlled light path manipulation. The ferroelastic nature of these crystals allowed the construction of robust hybrid photonic structures, including Z-shaped configurations, closed-loop networks, and staircase-like hybrid optical waveguides. This study highlights the potential of shape-switchable organoferroelastic crystals as waveguides for applications in programmable photonic devices.

An elastic single crystal composed of one-dimensional chiral coordination polymers

A single crystal composed of one-dimensional coordinated polymers, [CdCl2(1-methyl-2-pyridone)]n, has been synthesized and characterized. This compound exhibits outstanding elastic bending due to the molecular spring nature of the CdCl2 coordination framework and weak intermolecular interactions between the coordination chains. Owing to the helical arrangement of organic ligands surrounding the coordination structure, the compound crystallizes in a chiral space group. As a result, it displays compelling circular dichroism spectra and second harmonic generation properties.

Mechanically controlled multifaceted dynamic transformations in twisted organic crystal waveguides

This study introduces mechanically induced phenomena such as standing, leaning, stacking, and interlocking behaviors in naturally twisted optical waveguiding microcrystals on a substrate. The microscale twisted crystal self-assembled from 2,4-dibromo-6-(((2-bromo-5-fluorophenyl)imino)methyl)phenol is flexible and emits orange fluorescence. Mechanistic analysis reveals the strain generated by the intergrowing orientationally mismatched nanocrystallites is responsible for the twisted crystal growth. The crystal's mechanical flexibility in the perpendicular direction to (001) and (010) planes can be attributed to intermolecular Br···Br, F···Br, and π···π stacking interactions. Through a systematic process involving step-by-step bending and subsequent optical waveguiding experiments at each bent position, a linear relationship between optical loss and mechanical strain is established. Additionally, the vertical standing and leaning of these crystals at different angles on a flat surface and the vertical stacking of multiple crystals reveal the three-dimensional aspects of organic crystal waveguides, introducing light trajectories in a 3D space. Furthermore, the integration of two axially interlocked twisted crystals enables the coupling of polarization rotation along their long axis. These crystal dynamics expand the horizons of crystal behavior and have the potential to revolutionize various applications, rendering these crystals invaluable in the realm of crystal-related science and technology.

Highly efficient in crystallo energy transduction of light to work

Various mechanical effects have been reported with molecular materials, yet organic crystals capable of multiple dynamic effects are rare, and at present, their performance is worse than some of the common actuators. Here, we report a confluence of different mechanical effects across three polymorphs of an organic crystal that can efficiently convert light into work. Upon photodimerization, acicular crystals of polymorph I display output work densities of about 0.06-3.94 kJ m-3, comparable to ceramic piezoelectric actuators. Prismatic crystals of the same form exhibit very high work densities of about 1.5-28.5 kJ m-3, values that are comparable to thermal actuators. Moreover, while crystals of polymorph II roll under the same conditions, crystals of polymorph III are not photochemically reactive; however, they are mechanically flexible. The results demonstrate that multiple and possibly combined mechanical effects can be anticipated even for a simple organic crystal.

Flexible molecular crystals for optoelectronic applications

The cornerstones of the advancement of flexible optoelectronics are the design, preparation, and utilization of novel materials with favorable mechanical and advanced optoelectronic properties. Molecular crystalline materials have emerged as a class of underexplored yet promising materials due to the reduced grain boundaries and defects anticipated to provide enhanced photoelectric characteristics. An inherent drawback that has precluded wider implementation of molecular crystals thus far, however, has been their brittleness, which renders them incapable of ensuring mechanical compliance required for even simple elastic or plastic deformation of the device. It is perplexing that despite a plethora of reports that have in the meantime become available underpinning the flexibility of molecular crystals, the "discovery" of elastically or plastically deformable crystals remains limited to cases of serendipitous and laborious trial-and-error approaches, a situation that calls for a systematic and thorough assessment of these properties and their correlation with the structure. This review provides a comprehensive and concise overview of the current understanding of the origins of crystal flexibility, the working mechanisms of deformations such as plastic and elastic bending behaviors, and insights into the examples of flexible molecular crystals, specifically concerning photoelectronic changes that occur in deformed crystals. We hope this summary will provide a reference for future experimental and computational efforts with flexible molecular crystals aimed towards improving their mechanical behavior and optoelectronic properties, ultimately intending to advance the flexible optoelectronic technology.

Elastic Organic Crystals Exhibiting Amplified Spontaneous Emission Waveguides with Standard Red Chromaticity of the Rec.2020 Gamut

The use of mechanically flexible molecular crystals as optical transuding media is demonstrated for a plethora of applications; however, the spectral peaks of optical outputs located mainly in the range of 400-600 nm are insufficient for practical telecommunication and full-color display applications. Herein, two elastically bendable organic crystals are reported that show red emission of the rec.709 gamut under 365 nm UV light irradiation yet generate rec.2020 gamut red optical waveguides and amplified spontaneous emissions when irradiated by a 355 nm laser. Capitalizing on the extended π-conjugation and donor-acceptor character, as well as mechanical elasticity, these organic crystals exhibit flexible optical waveguides with Commission Internationale de L'Eclairage (CIE) coordinates of (0.70, 0.29), nearly identical to the red chromaticity of the rec.2020 gamut required for ultrahigh-definition (UHD) displays. Notably, one of the elastic crystals functions as a soft resonance cavity, resulting in amplified spontaneous emission waveguides with CIE coordinates of (0.71, 0.29) and the standard red chromaticity of the rec.2020 gamut, both in straight and bent states. This study presents a new avenue for the development of high-purity red-emissive crystalline materials to create all-organic, lightweight, and mechanically compliant optical telecommunication and UHD display devices.

Mechanoresponsive Flexible Crystals

Flexible crystals have gained significant attention owing to their remarkable pliability, plasticity, and adaptability, making them highly popular in various research and application fields. The main challenges in developing flexible crystals lie in the rational design, preparation, and performance optimization of such crystals. Therefore, a comprehensive understanding of the fundamental origins of crystal flexibility is crucial for establishing evaluation criteria and design principles. This Perspective offers a retrospective analysis of the development of flexible crystals over the past two decades. It summarizes the elastic standards and possible plastic bending mechanisms tailored to diverse flexible crystals and analyzes the assessment of their theoretical basis and applicability. Meanwhile, the compatibility between crystal elasticity and plasticity has been discussed, unveiling the immense prospects of elastic/plastic crystals for applications in biomedicine, flexible electronic devices, and flexible optics. Furthermore, this Perspective presents state-of-the-art experimental avenues and analysis methods for investigating molecular interactions in molecular crystals, which is vital for the future exploration of the mechanisms of crystal flexibility.

Hybrid and composite materials of organic crystals

Organic molecular crystals have historically been viewed as delicate and fragile materials. However, recent studies have revealed that many organic crystals, especially those with high aspect ratios, can display significant flexibility, elasticity, and shape adaptability. The discovery of mechanical compliance in organic crystals has recently enabled their integration with responsive polymers and other components to create novel hybrid and composite materials. These hybrids exhibit unique structure-property relationships and synergistic effects that not only combine, but occasionally also enhance the advantages of the constituent crystals and polymers. Such organic crystal composites rapidly emerge as a promising new class of materials for diverse applications in optics, electronics, sensing, soft robotics, and beyond. While specific, mostly practical challenges remain regarding scalability and manufacturability, being endowed with both structurally ordered and disordered components, the crystal-polymer composite materials set a hitherto unexplored yet very promising platform for the next-generation adaptive devices. This Perspective provides an in-depth analysis of the state-of-the-art in design strategies, dynamic properties and applications of hybrid and composite materials centered on organic crystals. It addresses the current challenges and provides a future outlook on this emerging class of multifunctional, stimuli-responsive, and mechanically robust class of materials.

Molecular elastic crystals exhibiting slow magnetic relaxations

We report an elastic crystal of a copper(II) porphyrinato complex that exhibits slow magnetic relaxations and is a promising candidate for an external-force-responsive spin qubit.

Mechanical Effects of Elastic Crystals Driven by Natural Sunlight and Force

Flexible crystals that can capture solar energy and convert it into mechanical energy are promising for a wide range of applications such as information storage and actuators, but obtaining them remains a challenge. Herein, an elastic crystal of a barbiturate derivative was found to be an excellent candidate, demonstrating plastic bending behavior under natural sunlight irradiation. 1 H NMR and high-resolution mass spectrum data of microcrystals before and after light irradiation demonstrated that light-induced [2+2] cycloaddition was the driving force for the photomechanical effects. Interestingly, the crystals retained elastic bending even after light irradiation. This is the first report of flexible crystals that can be driven by natural sunlight and that have both photomechanical properties and elasticity. Furthermore, regulation of the passive light output direction of the crystals and transport of objects by applying mechanical forces and light was demonstrated.

Woven organic crystals

Woven architectures are prepared by physical entanglement of fibrous components to expand one-dimensional material into two-dimensional sheets with enhanced strength and resilience to wear. Here, we capitalize on the elastic properties of long organic crystals with a high aspect ratio to prepare an array of centimeter-size woven network structures. While being robust to mechanical impact, the woven patches are also elastic due to effective stress dissipation by the elasticity of the individual warp and weft crystals. The thermal stability of component crystals translates into favorable thermoelastic properties of the porous woven structures, where the network remains elastic over a range of 300 K. By providing means for physical entanglement of organic crystals, the weaving circumvents the natural limitation of the small size of slender organic crystals that is determined by their natural growth, thereby expanding the prospects for applications of organic crystals from one-dimensional entities to expandable, two-dimensional robust structures.

Flexible Crystal Heterojunctions of Low-Dimensional Organic Metal Halides Enabling Color-Tunable Space-Resolved Optical Waveguides

Molecular luminescent materials with optical waveguide have wide application prospects in light-emitting diodes, sensors, and logic gates. However, the majority of traditional optical waveguide systems are based on brittle molecular crystals, which limited the fabrication, transportation, storage, and adaptation of flexible devices under diverse application situations. To date, the design and synthesis of photofunctional materials with high flexibility, novel optical waveguide, and multi-port color-tunable emission in the same solid-state system remain an open challenge. Here, we have constructed new types of zero-dimensional organic metal halides (Au-4-dimethylaminopyridine [DMAP] and In-DMAP) with a rarely high elasticity and rather low loss coefficients for optical waveguide. Theoretical calculations on the intermolecular interactions showed that the high elasticity of 2 molecular crystalline materials was original from their herringbone structure and slip plane. Based on one-dimensional flexible microrods of 2 crystals and the 2-dimensional microplate of the Mn-DMAP, heterojunctions with multi-color and space-resolved optical waveguides have been fabricated. The formation mechanism of heterojunctions is based on the surface selective growth on account of the low lattice mismatch ratio between contacting crystal planes. Therefore, this work describes the first attempt to the design of metal-halide-based crystal heterojunctions with high flexibility and optical waveguide, expanding the prospects of traditional luminescent materials for smart optical devices, such as logic gates and multiplexers.

Autonomous self-healing organic crystals for nonlinear optics

Non-centrosymmetric molecular crystals have a plethora of applications, such as piezoelectric transducers, energy storage and nonlinear optical materials owing to their unique structural order which is absent in other synthetic materials. As most crystals are brittle, their efficiency declines upon prolonged usage due to fatigue or catastrophic failure, limiting their utilities. Some natural substances, like bone, enamel, leaf and skin, function efficiently, last a life-time, thanks to their inherent self-healing nature. Therefore, incorporating self-healing ability in crystalline materials will greatly broaden their scope. Here, we report single crystals of a dibenzoate derivative, capable of self-healing within milliseconds via autonomous actuation. Systematic quantitative experiments reveal the limit of mechanical forces that the self-healing crystals can withstand. As a proof-of-concept, we also demonstrate that our self-healed crystals can retain their second harmonic generation (SHG) with high efficiency. Kinematic analysis of the actuation in our system also revealed its impressive performance parameters, and shows actuation response times in the millisecond range.

Janus-Type ESIPT Chromophores with Distinctive Intramolecular Hydrogen-bonding Selectivity

Excited-state intramolecular proton transfer (ESIPT)-based solid luminescent materials with multiple hydrogen bond acceptors (HBAs) remain unexplored. Herein, we introduced a family of Janus-type ESIPT chromophores featuring distinctive hydrogen bond (H-bond) selectivity between competitive HBAs in a single molecule. Our investigations showed that the central hydroxyl group preferentially forms intramolecular H-bonds with imines in imine-modified 2-hydroxyphenyl benzothiazole (HBT) chromophores but tethers the benzothiazole moiety in hydrazone-modified HBT chromophores. Imine-derived HBTs generally exhibit higher fluorescence efficiency, while hydrazone-derived HBTs show a reduced overlap between the absorption and fluorescence bands. Quantum chemical calculations unveiled the molecular origins of the biased intramolecular H-bonds and their impact on the ESIPT process. This Janus-type ESIPT chromophore skeleton provides new opportunities for the design of solid luminescent materials.

Dipole-Dependent Waveguiding in an Anisotropic Metal-Organic Framework

The interaction between excitons and photons underlies a range of emergent technologies, such as directional light emission, molecular lasers, photonic circuits, and polaritonic devices. Two of the key parameters that impact exciton-photon coupling are the binding energy of excitons and the relative orientations between the exciton dipole and photon field. Tightly bound excitons are typically found in molecular crystals, where nevertheless the angular relationship of excitons with photon fields is difficult to control. Here, we demonstrate directional exciton dipoles and photon fields, anchored by metal-ligand coordination. In a pyrene-porphyrin bichromophoric metal-organic framework (MOF), we observe that the perpendicular arrangement of the pyrene- and porphyrin-based exciton dipoles engenders orthogonal polarizations of their respective emissions. The alignment of the directional exciton and photon fields gives rise to an anisotropic waveguide effect, where the pyrene- and the porphyrin-based emissions show distinct spatial distribution within microplate-shaped MOF crystals. This capability to simultaneously host heterogenous excitonic states and anisotropic photon fields points toward MOFs' yet-to-be-realized potential as a platform for advancing the frontier in the field of exciton-photonics, which centers around engineering emergent properties from the interplay between excitons and photons.

The Factor beyond Schmidt's Criteria Impacting the Photo-Induced [2+2] Cycloaddition Reactivity and Photoactuation of Molecular Crystals Based on Cyclic Chalcone Analogues

Generally, the potential reactive "olefin pairs" in the molecular crystals satisfying Schmidt's criteria could undergo topological [2+2] cycloaddition. In this study, another factor that affects the photodimerization reactivity of chalcone analogues was found. The cyclic chalcone analogues of (E)-2-(2,4-dichlorobenzylidene)-2,3-dihydro-1H-inden-1-one (BIO), (E)-2-(naphthalen-2-ylmethylene)-2,3-dihydro-1H-inden-1-one (NIO), (Z)-2-(2,4-dichlorobenzylidene)benzofuran-3(2H)-one (BFO), and (Z)-2-(2,4-dichlorobenzylidene)benzo[b]thiophen-3(2H)-one (BTO) have been synthesized. While the geometrical parameters for the molecular packing of the above four compounds did not exceed Schmidt's criteria, [2+2] cycloaddition did not occur in the crystals of BIO and BTO. The single crystal structures and Hirshfeld surface analyses revealed that interactions of C=O⋅⋅⋅H (CH2 ) existed between adjacent molecules in the crystal of BIO. Therefore, the carbonyl and methylene groups linked with one carbon atom in carbon-carbon double bond were tightly confined in the lattice, acting as a tweezer to inhibit free movement of the double bond and suppressing [2+2] cycloaddition. In the crystal of BTO, similar interactions of Cl⋅⋅⋅S and C=O⋅⋅⋅H (C6 H4 ) prevented free movement of the double bond. In contrast, the intermolecular interaction of C=O⋅⋅⋅H only exists around the carbonyl group in the crystals of BFO and NIO, leaving the C=C double bonds to move freely and allowing the occurrence of [2+2] cycloaddition. Driven by photodimerization, the needle-like crystals of BFO and NIO displayed evident photo-induced bending behavior. This work demonstrates that the intermolecular interactions around carbon-carbon double bond affect the [2+2] cycloaddition reactivity except for Schmidt's criteria. These findings provide valuable insights into the design of photomechanical molecular crystalline materials.

Collective photothermal bending of flexible organic crystals modified with MXene-polymer multilayers as optical waveguide arrays

The performance of any engineering material is naturally limited by its structure, and while each material suffers from one or multiple shortcomings when considered for a particular application, these can be potentially circumvented by hybridization with other materials. By combining organic crystals with MXenes as thermal absorbers and charged polymers as adhesive counter-ionic components, we propose a simple access to flexible hybrid organic crystal materials that have the ability to mechanically respond to infrared light. The ensuing hybrid organic crystals are durable, respond fast, and can be cycled between straight and deformed state repeatedly without fatigue. The point of flexure and the curvature of the crystals can be precisely controlled by modulating the position, duration, and power of thermal excitation, and this control can be extended from individual hybrid crystals to motion of ordered two-dimensional arrays of such crystals. We also demonstrate that excitation can be achieved over very long distances (>3 m). The ability to control the shape with infrared light adds to the versatility in the anticipated applications of organic crystals, most immediately in their application as thermally controllable flexible optical waveguides for signal transmission in flexible organic electronics.

Bioinspired soft robots based on organic polymer-crystal hybrid materials with response to temperature and humidity

The capability of stimulated response by mechanical deformation to induce motion or actuation is the foundation of lightweight organic, dynamic materials for designing light and soft robots. Various biomimetic soft robots are constructed to demonstrate the vast versatility of responses and flexibility in shape-shifting. We now report that the integration of organic molecular crystals and polymers brings about synergistic improvement in the performance of both materials as a hybrid materials class, with the polymers adding hygroresponsive and thermally responsive functionalities to the crystals. The resulting hybrid dynamic elements respond within milliseconds, which represents several orders of magnitude of improvement in the time response relative to some other type of common actuators. Combining molecular crystals with polymers brings crystals as largely overlooked materials much closer to specific applications in soft (micro)robotics and related fields.

Crystals of Aliphatic Derivatives of [Cu(acac)2 ] have Distinct Atomic-Scale Mechanisms of Bending

Molecular crystals displaying elastic flexibility have important applications in the fields of optoelectronics and nanophotonic technologies. Understanding the mechanisms by which these materials bend is critical to the design of future materials incorporating these properties. Based on the known elastic properties of bis(acetylacetonato)copper(II), a series of 14 aliphatic derivatives are synthesized and crystallized. All those which grew in a needle morphology display noticeable elasticity, with 1D chains of π-stacked molecules parallel to the long metric length of the crystal a consistent crystallographic feature. Crystallographic mapping is used to measure the mechanism of elasticity at an atomic-scale. Symmetric derivatives with ethyl and propyl side chains are found to have different mechanisms of elasticity, which are further distinguished from the previously reported mechanism of bis(acetylacetonato)copper(II). While crystals of bis(acetylacetonato)copper(II) are known to bend elastically via a molecular rotation mechanism, the elasticity of the compounds presented is facilitated by expansion of their π-stacking interactions.

Elastic and bright assembly-induced luminescent crystals of platinum(II) complexes with near-unity emission quantum yield

Molecular crystals of Pt(II) complexes with metallophilic interactions can provide bright assembly-induced luminescence with colour tunability. However, the brittleness of many of these crystals makes their application in flexible optical materials difficult. Herein, we have achieved the elastic deformation of crystals of polyhalogenated Pt(II) complexes exhibiting bright assembly-induced luminescence. A crystal of [Pt(bpic)(dFppy)] (Hbpic = 5-bromopicolinic acid, HdFppy = 2-(2,4-difluorophenyl)pyridine) and a co-crystal of [Pt(bpic)(dFppy)] and [Pt(bpic)(ppy)] (Hppy = 2-phenylpyridine) were found to exhibit significant elastic deformation due to their highly anisotropic interaction topologies. While the crystal of [Pt(bpic)(dFppy)] exhibited monomer-based ligand-centred ³ππ* emission with an emission quantum yield of 0.40, the co-crystal exhibited bright, triplet metal-metal-to-ligand charge transfer (³MMLCT) emission owing to Pt⋯Pt interactions, thereby achieving a significantly higher emission quantum yield of 0.94.

Elastic Organic Crystals as Bioinspired Hair-Like Sensors

One of the typical haptic elements are natural hairy structures that animals and plants rely on for feedback. Although these hair sensors are an admirable inspiration, the development of active flow sensing components having low elastic moduli and high aspect ratios remains a challenge. Here, we report a new sensing approach based on a flexible, thin and optically transmissive organic crystal of high aspect ratio, which is stamped with fluorescent dye for tracking. When subjected to gas flow and exposed to laser, the crystal bends due to exerted pressure and acts as an optical flow (hair) sensor with low detection limit (≈1.578 m s^-1 ) and fast response time (≈2.70 s). The air-flow-induced crystal deformation and flow dynamics response are modelled by finite element analysis. Due to having a simple design and being lightweight and mechanically robust this prototypical crystal hair-like sensor opens prospects for a new class of sensing devices ranging from wearable electronics to aeronautics.

Elastic organic semiconducting single crystals for durable all-flexible field-effect transistors: insights into the bending mechanism

Although many examples of mechanically flexible crystals are currently known, their utility in all-flexible devices is not yet adequately demonstrated, despite their immense potential for fabricating high performance flexible devices. Here, we report two alkylated diketopyrrolopyrrole (DPP) semiconducting single crystals, one of which displays impressive elastic mechanical flexibility whilst the other is brittle. Using the single crystal structures and density functional theory (DFT) calculations, we show that the methylated diketopyrrolopyrrole (DPP-diMe) crystals, with dominant π-stacking interactions and large contributions from dispersive interactions, are superior in terms of their stress tolerance and field-effect mobility (μ FET) when compared to the brittle crystals of the ethylated diketopyrrolopyrrole derivative (DPP-diEt). Periodic dispersion-corrected DFT calculations revealed that upon the application of 3% uniaxial strain along the crystal growth (a)-axis, the elastically flexible DPP-diMe crystal displays a soft energy barrier of only 0.23 kJ mol-1 while the brittle DPP-diEt crystal displays a significantly larger energy barrier of 3.42 kJ mol-1, in both cases relative to the energy of the strain-free crystal. Such energy-structure-function correlations are currently lacking in the growing literature on mechanically compliant molecular crystals and have the potential to support a deeper understanding of the mechanism of mechanical bending. The field effect transistors (FETs) made of flexible substrates using elastic microcrystals of DPP-diMe retained μ FET (from 0.019 cm2 V-1 s-1 to 0.014 cm2 V-1 s-1) more efficiently even after 40 bending cycles when compared to the brittle microcrystals of DPP-diEt which showed a significant drop in μ FET just after 10 bending cycles. Our results not only provide valuable insights into the bending mechanism, but also demonstrate the untapped potential of mechanically flexible semiconducting crystals for designing all flexible durable field-effect transistor devices.

Hierarchical Integration of Organic Core/Shell Microwires for Advanced Photonics

The combination of multiple components or structures into integrated micro/nanostructures for practical application has been pursued for many years. Herein, a series of hierarchical organic microwires with branch, core/shell (C/S), and branch C/S structures are successfully constructed based on organic charge transfer (CT) cocrystals with structural similarity and physicochemical tunability. By regulating the intermolecular CT interaction, single microwires and branch microstructures can be integrated into the C/S and branch C/S structures, respectively. Significantly, the integrated branch C/S microwires, with multicolor waveguide behavior and branch structure multichannel waveguide output characteristics, can function as an optical logic gate with multiple encoding features. This work provides useful insights for creating completely new types of organic microstructures for integrated optoelectronics.

Luminescent Möbius Strip of a Flexible Halogen-Bonded Cocrystal Evolved from Ring and Helix

Luminescent Möbius strip microstructures have been created for the first time based on flexible organic single crystals via a template-free solution self-assembly. We herein demonstrated a rationally designed morphological evolution toward Möbius strips from rings and helixes. Our findings lay the foundation for the future construction of complex matters with predetermined morphologies and functions from crystal systems.

Electrically conductive hybrid organic crystals as flexible optical waveguides

Hybrid materials capitalize on the properties of individual materials to attain a specific combination of performance assets that is not available with the individual components alone. We describe a straightforward approach to preparation of sandwich-type hybrid dynamic materials that combine metals as electrically conductive components and polymers as bending, momentum-inducing components with flexible organic crystals as mechanically compliant and optically transducive medium. The resulting hybrid materials are conductive to both electricity and light, while they also respond to changes in temperature by deformation. Depending on the metal, their conductivity ranges from 7.9 to 21.0 S µm^‒1. The elements respond rapidly to temperature by curling or uncurling in about 0.2 s, which in one typical case corresponds to exceedingly fast deformation and recovery rates of 2187.5° s^‒1 and 1458.3° s^‒1, respectively. In cyclic operation mode, their conductivity decreases less than 1% after 10,000 thermal cycles. The mechanothermal robustness and dual functionality favors these materials as candidates for a variety of applications in organic-based optics and electronics, and expands the prospects of application of organic crystals beyond the natural limits of their dynamic performance.

Realization of Single-Crystal Dye Lasers by Taming Charge Transfer in Molecular Self-Assemblies

The large library of organic dye molecules offers almost infinite possibilities for laser design, but still faces a great challenge in achieving pure dye aggregate lasers due to intermolecular quenching. Here, we report a kinetically controlled molecular self-assembly strategy to synthesize unconventional dye microcrystals for lasing. By increasing temperature, the dye self-assembly is transformed from thermodynamic to kinetic control. Unlike the thermodynamic microcrystal products incapable of lasing due to intermolecular charge-transfer-mediated excimer formation, the kinetic dye microcrystals have large intermolecular distances and weak intermolecular interactions, supporting highly efficient intramolecular charge-transfer monomer emission and low-threshold lasing. This work demonstrates single-crystal dye lasers, promising to unleash the full potential of laser dyes in solid-state lasers.

A Low-Temperature-Resistant Flexible Organic Crystal with Circularly Polarized Luminescence

Flexible organic crystals with unique mechanical properties and excellent optical properties are of paramount significance for their wide applications in various research fields such as adaptive optics and soft robotics. However, low-temperature-resistant flexible organic crystal with circularly polarized luminescence (CPL) has never been reported. Herein, chiral organic crystals with CPL activity and low-temperature flexibility (77 K) are fabricated by the solvent diffusion method from chiral Schiff base, S(R)-4-bromo-2-(((1-phenylethyl)imino)methyl)phenol (S(R)-BPEMP). The corresponding chirooptical properties for the two enantiomeric crystals were thoroughly investigated, including the measurements of circular dichroism (CD) and CPL. To the best of our knowledge, this is the first report on low-molecular-weight flexible organic crystals with CPL activity, and we believe that the results will give a new impetus to the research of organic crystals.