Ylide-Functionalized Phosphines: Strong Donor Ligands for Homogeneous Catalysis

Design and synthesis of versatile ligand precursors based on phosphonium ylides for palladalactam formation and catalytic investigation

A new series of ligand precursors designed for the synthesis of palladalactams has been developed. These precursors are easily accessible through a one-step reaction involving 2-chloro-N-phenylacetamide and a wide choice of various monophosphines, offering tunable electronic and steric properties within the ligand framework. The stability of both ligand precursors and resulting palladalactams in ambient air enhances their practical applicability. A newly synthesized palladalactam, featuring an electron-donating triethylphosphine moiety on the anionic phosphonium ylide ligand scaffold exhibited promising catalytic activities in the Mizoroki-Heck coupling reaction between aryl chlorides and alkenes. Theoretical calculations further affirmed that the ligand system in the complex is the most electron-donating, forming the strongest Pd-C bond compared to other complexes with alternative phosphine moieties.

P,N-Coordinating Ylide-Functionalized Phosphines (NYPhos): A Ligand Platform for the Selective Monoarylation of Small Nucleophiles

Palladium-catalyzed coupling reactions of small nucleophiles are of great interest, but challenging due to difficulties in selectivity control. Herein, we report the development of a new platform of P,N-ligands consisting of ylide-functionalized phosphines with aminophosphonium groups (NYPhos) to address this challenge. These phosphine ligands are easily accessible in a wide structural diversity with highly modular electronic and steric properties. Based on a family of 14 ligands the selective monoarylation of acetone as well as other challenging ketones and amides was accomplished with record-setting activities even for aryl chlorides at room temperature including late-stage functionalizations of drug molecules. Moreover, ammonia and other small primary amines could be coupled at mild conditions. Isolation and structure analyses of palladium complexes within the catalytic cycle confirmed that the P,N-coordination mode is necessary to achieve the observed selectivities. It also demonstrated the facile adjustability of the N-donor strength, which is beneficial for the targeted design of tailored P,N-ligands for future applications.

Isolation of a Cyclic Trinuclear Gold(I) Complex with Metalated Phosphorus Ylides: Synthesis and Structural Properties

The first chiral and luminescent cyclic trinuclear gold(I) complex, [{AuCH(PPh2Me)(Ph2P)}3]3+, has been isolated with metalated phosphorus ylides (PY). This complex was initially obtained through the reaction of either mononuclear [C6F5SAuCH(PPh2Me)(Ph2P)]OTf or dinuclear [C6F5S{AuCH(PPh2Me)(Ph2P)}2](OTf)2 thiolate-gold-phosphane complexes in the presence of NaH, followed by the abstraction of the thiopyridine moiety employing either AgOTf or [Cu(CH3CN)4]PF6. Our quest for a more efficient synthesis route led to the development of a streamlined one-pot synthesis method, employing Ag(acac) as both a halogen abstractor and a base, offering a quicker and more direct path to this intriguing trimer. Comprehensive computational studies have unveiled the luminescent characteristics of this complex, which can be attributed to phosphorescence. These emissions originate from ligand-to-metal (LMCT) and metal-centered (MC) charge transfer excited states. Furthermore, the structural analysis via X-ray crystallography corroborated the formation of a trimeric species, featuring three monomers with the [AuCH(PPh2Me)(Ph2P)] motif. Each monomer exhibits a single chiral center, leading to four possible absolute configurations (RRR, RRS, RSR, and SRR). NMR and X-ray spectroscopy have provided valuable insights, establishing that the former configuration (RRR) is disfavored due to steric hindrance, while the three remaining configurations can interconvert, arising from the structural arrangement of the metallacycle and inherent symmetry operations.

Characterization of the Ligand Properties of Donor-stabilized Pnictogenyltrielanes

A general synthesis and the characterization of novel alkyl-substituted NHC-stabilized pnictogenylboranes NHC ⋅ BH2 ER2 (NHC=N-heterocyclic carbene, E=P, As; R2 =Me2 , Ph2 , t BuH, Cy2 , (SiMe3 )2 ) are reported. These compounds were reacted with Ni(CO)4 to the corresponding complexes of the type [(NHC ⋅ BH2 ER2 )Ni(CO)3 ] to determine their donor strength by Tolman Electronic Parameters (TEPs) and their steric demand as ligands compared to classical phosphines, superbasic phosphines and other commonly applied donor systems. The results show that the NHC-stabilized pnictogenyltrielanes can be considered as being highly basic, while their steric influence depends strongly on the organic residues as well as the donor attached to the {BH2 } moiety. Although weaker than commonly used superbasic phosphines, the donor strength of pnictogenyltrielanes in general can be classified as of similar strength as NHCs. The steric and electronic properties can easily be modified by alkyl substitution as evident from the TEP trends.

Deciphering the Primary Role of Au⋅⋅⋅H-X Hydrogen Bonding in Gold Catalysis

Au⋅⋅⋅H-X (X=N or C) hydrogen bonding is gaining increasing interest, both in the study of its intrinsic nature and in their operability in different fields. While the role of these interactions has been studied in the stabilization of gold(I) complexes, their role during the minimum free energy reaction pathway of a given catalytic process remains unexplored. We report herein that complex [Au(C≡CPh)(pip)] (pip=piperidine) catalyses the A3 -coupling reaction for the synthesis of propargylamines, thanks to the ability of Au(I) to promote weak hydrogen bonding interactions with the reactants along the free energy profile. Density Functional Theory (DFT) calculations show that these Au⋅⋅⋅H-X interactions play a directing role in the catalysed A3 -coupling. Topological non-covalent interactions (NCI), interaction region indicator (IRI) and quantum theory of atoms in molecules (QTAIM) analysis in real space of the electron density provide a description of these interactions accurately.

On the Edge of the Known: Extremely Electron-Rich (Di)Carboranyl Phosphines

The syntheses of the first B9-connected carboranylphosphines (B9-Phos) featuring two carboranyl moieties as well as access to B9-Phos ligands with bulky electron-donating substituents, previously deemed unattainable, is reported. The electrochemical properties of the B9-Phos ligands were investigated, revealing the ability of the mesityl derivatives to form stabilized phosphoniumyl radical cations. The B9-Phos ligands display an extremely electron-releasing character surpassing that of alkyl phosphines and commonly used N-heterocyclic carbenes. This is demonstrated by their very small Tolman electronic parameters (TEPs) as well as extremely low P-Se coupling constants. Cone angles and buried volumes attest to the high steric demand exerted by the (di)carboranyl phosphines. The dicarboranyl phosphine Au^I complexes show superior catalytic performance in the hydroamination of alkynes compared to the monocarboranyl phosphine analogs.

Computer-Driven Development of Ylide Functionalized Phosphines for Palladium-Catalyzed Hiyama Couplings

Palladium-catalyzed couplings of silicon enolates with aryl electrophiles are of great synthetic utility, but often limited to expensive bromide substrates. A comparative experimental study confirmed that none of the established ligand systems allows to couple inexpensive aryl chlorides with α-trimethylsilyl alkylnitriles. In contrast, ylide functionalized phosphines (YPhos) led to encouraging results. A statistical model was developed that correlates the reaction yields with ligand features. It was employed to predict catalyst structures with superior performance. With this cheminformatics approach, YPhos ligands were tailored specifically to the demands of Hiyama couplings. The newly synthesized ligands displayed record-setting activities, enabling the elusive coupling of aryl chlorides with α-trimethylsilyl alkyl nitriles. The preparative utility of the catalyst system was demonstrated by the synthesis of pharmaceutically meaningful α-aryl alkylnitriles, α-arylcarbonyls and biaryls.

Formation of exceptional monomeric YPhos-PdCl2 complexes with high activities in coupling reactions

The use of well-defined palladium(ii) complexes as precatalysts for C-X cross-coupling reactions has improved the use of palladium catalysts in organic synthesis including large-scale processes. Whereas sophisticated Pd(ii) precursors have been developed in the past years to facilitate catalyst activation as well as the handling of systems with more advanced monophosphine ligands, we herein report that simple PdCl₂ complexes function as efficient precatalysts for ylide-substituted phosphines (YPhos). These complexes are readily synthesized from PdCl₂ sources and form unprecedented monomeric PdCl₂ complexes without the need for any additional coligand. Instead, these structures are stabilized through a unique bonding motif, in which the YPhos ligands bind to the metal through the adjacent phosphine and ylidic carbon site. DFT calculations showed that these bonds are both dative interactions with the stronger interaction originating from the electron-rich phosphine donor. This bonding mode leads to a remarkable stability even towards air and moisture. Nonetheless, the complexes readily form monoligated LPd(0) complexes and thus the active palladium(0) species in coupling reactions. Accordingly, the YPhos-PdCl₂ complexes serve as highly efficient precatalysts for a series of C-C and C-X coupling reactions. Despite their simplicity they can compete with the efficiency of more complex and less stable precatalysts.

Synthesis and Chemistry of Ammonioethenyl and Phosphonioethenyl Ligands in Zwitterionic Dirhenium Carbonyl Complexes

New zwitterionic dirhenium carbonyl complexes containing ammonioethenyl and phosphonioethenyl ligands have been synthesized and studied. The reaction of Re₂(CO)₁₀ with C₂H₂ and Me₃NO yielded the dirhenium complex Re₂(CO)₉(NMe₃) (6) and the new zwitterionic complex Re₂(CO)₉[η¹-E-2-CH═CH(NMe₃)] (7). Compound 6 was characterized structurally and was found to have a NMe₃ ligand in an equatorial coordination site cis to a long Re-Re single bond, Re-Re = 3.0938(2) Å. Compound 7 can be obtained from the reaction of 6 with ethyne (C₂H₂) formally by the insertion of ethyne into the Re-N bond to the NMe₃ ligand. Compound 7 contains a 2-trimethylammonioethenyl ligand, ^-CH═CH(⁺NMe₃), that is formally a zwitterion having a positive charge on the nitrogen atom and a negative charge on the terminal carbon atom. When coordinated to rhenium by the terminal ethenyl carbon atom, the negative charge on the ^-CH═CH(⁺NMe₃) carbon atom is formally transferred to the rhenium atom. The reaction of Re₂(CO)₁₀ with C₂H₂ and NEt₃ in the presence of Me₃NO yielded the new dirhenium complex Re₂(CO)₉[η¹-E-2-CH═CH(NEt₃)] (8) together with some 6 and 7. Compound 8 is structurally similar to 7, but it contains a NEt₃ group in the ammonioethenyl ligand in the place of the NMe₃ group in 7. Reactions of 7 with PMePh₂ and PPh₃ yielded the zwitterionic 2-arylphosphonioethenyl-coordinated dirhenium carbonyl complexes, Re₂(CO)₉[η¹-E-2-CH═CH(PPh₂Me)] (9a) and Re₂(CO)₉[η¹-E-2-CH═CH(PPh₃)] (9b), and the zwitterionic 1-phosphonioethenyl ligand in the dirhenium carbonyl complexes, Re₂(CO)₉[η¹-1-C(PPh₂Me)(═CH₂)] (10a), Re₂(CO)₈[μ-η²-1-C(PPh₂Me)(═CH₂)] (11a), and Re₂(CO)₈[[μ-η²-1-C(PPh₃)(CH₂)] (11b). Compound 10a was converted to 11a and the new compound Re₂(CO)₇(μ-H)[μ-η²-1-(CH₂C)P(Ph)(Me)(o-C₆H₄)], (12) by decarbonylation using Me₃NO. Compound 12 contains an ortho-metalated phenyl ring. The new products 6,7, 8, 9b, 10a, 11a, 11b and 12 were characterized structurally by single-crystal X-ray diffraction analyses.

From Stable PH-Ylides to α-Carbanionic Phosphines as Ligands for Zwitterionic Catalysts

Although ylides are commonly used reagents in organic synthesis, the parent methylphosphine MePH2 only exists in its phosphine form in the condensed phase. Its ylide tautomer H3 P+ -CH2 - is considerably higher in energy. Here, we report on the formation of bis(sulfonyl)methyl-substituted phosphines of the type (RO2 S)2 C(H)-PR2, which form stable PH ylides under ambient conditions, amongst the first examples of an acyclic phosphine which only exists in its PH ylide form. Depending on the exact substitution pattern the phosphines form an equilibrium between the PH ylide and the phosphine form or exist as one of both extremes. These phosphines were found to be ideal starting systems for the facile formation of α-carbanionic phosphines. The carbanion-functionalization leads to a switch from electron-poor to highly electron-rich phosphines with strong donor abilities and high basicities. Thus, the phosphines readily react with different electrophiles exclusively at the phosphorus atom and not at the carbanionic center. Furthermore, the anionic nature of the phosphines allows the formation of zwitterionic complexes as demonstrated by the isolation of a gold(I) complex with a cationic metal center. The cationic gold center allows for catalytic activity in the hydroamination of alkyne without requiring a further activation step.

Ylide-Substituted Phosphines: A Platform of Strong Donor Ligands for Gold Catalysis and Palladium-Catalyzed Coupling Reactions

The development of homogeneous catalysts is strongly connected to the design of new, sophisticated ligands, which resolve limitations of a given reaction protocol by manipulating the electronic properties of the metal and its spatial environment. Phosphines are a privileged class of ligands that find applications in many catalytic transformations, ranging from hydrogenation reactions to hydroformylation and coupling chemistry. For many years, chemists have been trying to improve the efficiency, selectivity, and application of coupling reactions. The use of highly electron-rich and bulky phosphines was often associated with increased selectivity and efficiency and led to the development of a vast variety of electron-rich alkyl-substituted phosphines. However, this concept of increasing the ligand donor strength reaches its limits with the use of trialkyl-substituted phosphines with tri-tert-butylphosphine thus being one of the most active ligands for many years. In the course of our research efforts to use the special donor strength of ylides to stabilize electron-deficient, low-valent main group compounds, we realized that ylide-substituted phosphine (YPhos) ligands possess remarkably strong donor abilities. Moreover, the YPhos ligands are highly tunable by changing the nature of the groups on the phosphonium, phosphine, or central ylidic carbon atom. We thus obtained a ligand platform with donor capabilities ranging from PCy₃ to even stronger donor abilities than N-heterocyclic carbenes, while being more sterically demanding than simple phosphines as well as many well-known biarylphosphine ligands.These properties led us to explore the applicability of the YPhos ligands in catalysis. In a series of recent reports, our group applied YPhos ligands in gold and palladium catalyzed reactions at catalytic loadings applicable for medium- to large-scale applications. The increased donor strength and unique architecture allowed for remarkable activities in a series of transformations at mild reactions conditions. For gold(I)-catalyzed reactions, we obtained turnover numbers (TONs) for the hydroamination of phenylacetylene with aniline of over 20 000. Also, more complex reactions were easily catalyzed with efficiencies greater than those of other known gold(I) catalysts. Similar efficacies were found in a series of palladium-catalyzed coupling reactions. In Buchwald-Hartwig aminations, unprecedented activities for the amination of aryl chlorides were reached at room temperature. The speed of formation of the catalytically active mono-YPhos palladium species allowed for some of the amination reactions to be completed in only a few minutes. Adjustment of the ligand design enabled the use of a large variety of different aryl and alkyl amines of different steric demands. Furthermore, the YPhos ligands in general showed high activities and selectivity in the coupling of a variety of carbon nucleophiles with aryl chlorides, bromides, and triflates. This enabled the development of efficient reaction protocols for the α-arylation of unhindered ketones and the coupling of Grignard and zinc reagents as well as the first efficient coupling of chloroarenes with alkyllithium compounds. This Account summarizes the recent development of YPhos ligands and their application in gold and palladium catalysis. We also hope to stimulate further use of this ligand platform in catalysis in the future.

Synthesis of Sterically Encumbered Di- and Triarylamines by Palladium-Catalysed C-N Coupling Reactions at Mild Reaction Conditions

The synthesis of bulky, ortho-substituted triarylamines often represents a synthetic challenge, but is highly desirable due to the use of these compounds in organic electronics. Here, we report on a...

Ylide-stabilized phosphenium cations: Impact of the substitution pattern on the coordination chemistry

Although N‐heterocyclic phosphenium (NHP) cations have received considerable research interest due to their application in organocatalysis, including asymmetric synthesis, phosphenium cations with other substitution patterns have hardly been explored. Herein, the preparation of a series of ylide‐substituted cations of type [YPR]⁺ (with Y=Ph₃PC(Ph), R=Ph, Cy or Y) and their structural and coordination properties are reported. Although the diylide‐substituted cation forms spontaneous from the chlorophosphine precursor, the monoylidylphosphenium ions required the addition of a halide‐abstraction reagent. The molecular structures of the cations reflected the different degrees of electron donation from the ylide to the phosphorus center depending on the second substituent. Molecular orbital analysis confirmed the stronger donor properties of the ylide systems compared to NHPs with the mono‐ylide substituted cations featuring a more pronounced electrophilicity. This was mirrored by the reaction of the cations towards gold chloride, in which only the diylide‐substituted cation [Y₂P]⁺ formed the expected LAuCl]⁺ complex, while the monoylide‐substituted compounds reacted to the chlorophosphine ligands by transfer of the chloride from gold to the phosphorus center. These results demonstrate the tunability of ylide‐functionalized phosphorus cations, which should allow for further applications in coordination chemistry in the future.

Carbenes and phosphonium ylides: a fruitful association in coordination chemistry

Among a plethora of σ-donor ligands available, carbon-centered ones have become essential, in particular with the emergence of N-heterocyclic carbenes (NHCs), positioning themselves as credible alternatives to traditional nitrogen- and phosphorus-based systems. Phosphonium ylides representing another class of neutral η¹-bonded carbon ligands have also been shown to act as effective Lewis bases. Considering the intrinsic features of the carbene and phosphonium ylide ligands, similar in terms of electronic properties, but different in terms of bonding mode, the design of hybrid systems combining these two types of carbon functionalities appeared to be a natural and exciting challenge. This Perspective comprehensively covers the chemistry of such ligand architectures from synthesis and fundamental aspects to catalytic applications.

Tris(tetramethylguanidinyl)phosphine: The Simplest Non-ionic Phosphorus Superbase and Strongly Donating Phosphine Ligand

We report the synthesis and properties of the much sought‐after tris(1,1,3,3‐tetramethylguanidinyl) phosphine P(tmg)₃, a crystalline, superbasic phosphine accessible through a short and scalable procedure from the cheap and commercially available bulk chemicals 1,1,3,3‐tetramethylguanidine, tris(dimethylamino)‐phosphine and phosphorus trichloride. The new phosphine exhibits exceptional electron donor properties and readily forms transition metal complexes with gold(I), palladium(II) and rhodium(I) precursors. The formation of zwitterionic Lewis base adducts with carbon dioxide and sulfur dioxide was explored. In addition, the complete series of phosphine chalcogenides was prepared from the reaction of P(tmg)₃ with N₂O and the elemental chalcogens.

Halogen-Bridged Methylnaphthyl Palladium Dimers as Versatile Catalyst Precursors in Coupling Reactions

Halogen‐bridged methylnaphthyl (MeNAP) palladium dimers are presented as multipurpose Pd‐precursors, ideally suited for catalytic method development and preparative organic synthesis. By simply mixing with phosphine or carbene ligands, they are in situ converted into well‐defined monoligated complexes. Their catalytic performance was benchmarked against state‐of‐the‐art systems in challenging Buchwald–Hartwig, Heck, Suzuki and Negishi couplings, and ketone arylations. Their use enabled record‐setting activities, beyond those achievable by optimization of the ligand alone. The MeNAP catalysts permit syntheses of tetra‐ortho‐substituted arenes and bulky anilines in near‐quantitative yields at room temperature, allow mono‐arylations of small ketones, and enable so far elusive cross‐couplings of secondary alkyl boronic acids with aryl chlorides.

Synthesis, Crystal and Electronic Structures of a Thiophosphinoyl- and Amino-Substituted Metallated Ylide

α-Metallated ylides have revealed themselves to be versatile reagents for the introduction of ylide groups. Herein, we report the synthesis of the thiophosphinoyl and piperidyl (Pip) substituted α-metallated ylide [Ph2 (Pip)P=C-P(S)Ph2 ]M (M=Li, Na, K) through a four-step synthetic procedure starting from diphenylmethylphosphine sulfide. Metallation of the ylide intermediate was successfully accomplished with different alkali metal bases delivering the lithium, sodium and potassium salts, the latter isolable in high yields. Structure analyses of the lithium and potassium compounds in the solid state with and without crown ether revealed different aggregates (monomer, dimer and hexamer) with the metals coordinated by the thiophosphoryl moiety and ylidic carbon atom. Although the piperidyl group does not coordinate to the metal, it significantly contributes to the stability of the yldiide by charge delocalization through negative hyperconjugation.

Single‐Site and Cooperative Bond Activation Reactions with Ylide‐Functionalized Tetrylenes: A Computational Study

Due to their transition metal‐like behavior divalent group 14 compounds bear huge potential for their application in bond activation reactions and catalysis. Here we report on detailed computational studies on the use of ylide‐substituted tetrylenes in the activation of dihydrogen and phenol. A series of acyclic and cyclic ylidyltetrylenes featuring various α‐substituents with different σ‐ and π‐donating capabilities have been investigated which demonstrate that particularly π‐accepting boryl groups lead to beneficial properties and low barriers for single‐site activation reactions, above all in the case of silylenes. In contrast, for the thermodynamically more stable germylenes and stannylenes an alternative mechanism involving the active participation of the ylide ligand in the E−H bond (E=H or PhO) activation process by addition across the element carbon linkage was found to be energetically favored. Furthermore, the boryl substituted tetrylenes allowed for a further activation pathway involving the active participation of the boron element bond. These cooperative mechanisms are especially attractive for the heavier cyclic ylidyltetrylenes in which the loss of the protonated ylide group is prevented due to the cyclic framework. Overall, the present studies suggest that cyclic ylide‐substituted germylenes and stannylenes bear huge potential for cooperative bond activations at mild conditions which should be experimentally addressed in the future.

Au⋅⋅⋅H-C Hydrogen Bonds as Design Principle in Gold(I) Catalysis

Secondary ligand-metal interactions are decisive in many catalytic transformations. While arene-gold interactions have repeatedly been reported as critical structural feature in many high-performance gold catalysts, we herein report that these interactions can also be replaced by Au⋅⋅⋅H-C hydrogen bonds without suffering any reduction in catalytic performance. Systematic experimental and computational studies on a series of ylide-substituted phosphines featuring either a PPh3 (Ph YPhos) or PCy3 (Cy YPhos) moiety showed that the arene-gold interaction in the aryl-substituted compounds is efficiently compensated by the formation of Au⋅⋅⋅H-C hydrogen bonds. The strongest interaction is found with the C-H moiety next to the onium center, which due to the polarization results in remarkably strong interactions with the shortest Au⋅⋅⋅H-C hydrogen bonds reported to date. Calorimetric studies on the formation of the gold complexes further confirmed that the Ph YPhos and Cy YPhos ligands form similarly stable complexes. Consequently, both ligands showed the same catalytic performance in the hydroamination, hydrophenoxylation and hydrocarboxylation of alkynes, thus demonstrating that Au⋅⋅⋅H-C hydrogen bonds are equally suited for the generation of highly effective gold catalysts than gold-arene interactions. The generality of this observation was confirmed by a comparative study between a biaryl phosphine ligand and its cyclohexyl-substituted derivative, which again showed identical catalytic performance. These observations clearly support Au⋅⋅⋅H-C hydrogen bonds as fundamental secondary interactions in gold catalysts, thus further increasing the number of design elements that can be used for future catalyst construction.

Ylide-Substituted Phosphines with a Cyclic Ylide-Backbone: Angle Dependence of the Donor Strength

Ylide-substituted phosphines (YPhos) have been shown to be highly electron-rich and efficient ligands in a variety of palladium catalyzed transformations. Here, the synthesis and characterization of novel YPhos ligands containing a cyclic backbone architecture are reported. The ligands are easily synthesized from a cyclic phosphonium salt and the chlorophosphines Cy2PCl (L1) and Cy(FluMe)PCl (L2, with FluMe = 9-methylfluorenyl) and were characterized in both solution and solid states. The smaller PCy2-substituted ligand, L1, readily formed the biscoordinate L1 2 Pd species when treated with Pd2(dba)3 and showed no activity in palladium-catalyzed amination reactions even when applied as defined palladium(II) η3-allyl, t-Bu-indenyl, or cinnamyl precursors. Bulkier fluorenyl-substituted ligand L2 similarly was inactive, despite its ability to form the stable monophosphine complex L2·Pd(dba). Assessment of the electronic properties by experimental and computational methods revealed that L1 and L2 are considerably less electron-rich than previously synthesized YPhos ligands. This was shown to be the result of the small P-C-S bond angle, which is sterically enforced due to the cyclic nature of the backbone. Density functional theory calculations revealed that the small angle results in an increased s-character of the lone pair at the ylidic carbon atom and leads to a polarization of the C-P bond toward the carbon atom, thus decreasing the electron density at the phosphorus atom. The results demonstrate the tunability of the donor strength of YPhos ligands by modification of the ligand backbone beyond simple changes of the substitution pattern and are thus important for future ligand design, with a careful balance of many factors to be considered to achieve catalytic activity.

Direct Access to Palladium(II) Complexes Based on Anionic C,C,C-Phosphonium Ylide Core Pincer Ligand

The reaction of readily available imidazolium-phosphonium salt [MesIm(CH₂)₃PPh₃](OTf)₂ with PdCl₂ in the presence of an excess of Cs₂CO₃ afforded selectively in one step the cationic Pd(II) complex [(C,C,C)Pd(NCMe)](OTf) exhibiting an LX₂-type NHC-ylide-aryl C,C,C-pincer ligand via formal triple C-H bond activation. The replacement of labile MeCN in the latter by CNtBu and CO fragments allowed to estimate the overall electronic properties of this phosphonium ylide core pincer scaffold incorporating three different carbon-based donor ends by IR spectroscopy, cyclic voltammetry, and molecular orbital analysis, revealing its significantly higher electron-rich character compared to the structurally close NHC core pincer system with two phosphonium ylide extremities. The pincer complex [(C,C,C)Pd(CO)](OTf) represents a rare example of Pd(II) carbonyl species stable at room temperature and characterized by X-ray diffraction analysis. The treatment of isostructural cationic complexes [(C,C,C)Pd(NCMe)](OTf) and [(C,C,C)Pd(CO)](OTf) with (allyl)MgBr and nBuLi led to the formation of zwitterionic phosphonium organopalladates [(C,C,C)PdBr] and [(C,C,C)Pd(COnBu)], respectively.

Optimizing Catalyst and Reaction Conditions in Gold(I) Catalysis-Ligand Development

This review considers phosphine and N-heterocyclic carbene complexes of gold(I) that are used as (pre)catalysts for a range of reactions in organic synthesis. These are divided according to the structure of the ligand, with the narrative focusing on studies that offer a quantitative comparison between the ligands and readily available or widely used existing systems.

Phosphorus-Containing Superbases: Recent Progress in the Chemistry of Electron-Abundant Phosphines and Phosphazenes

The renaissance of Brønsted superbases is primarily based on their pronounced capacity for a large variety of chemical transformations under mild reaction conditions. Four major set screws are available for the selective tuning of the basicity: the nature of the basic center (N, P, …), the degree of electron donation by substituents to the central atom, the possibility of charge delocalization, and the energy gain by hydrogen bonding. Within the past decades, a plethora of neutral electron-rich phosphine and phosphazene bases have appeared in the literature. Their outstanding properties and advantages over inorganic or charged bases have now made them indispensable as auxiliary bases in deprotonation processes. Herein, an update of the chemistry of basic phosphines and phosphazenes is given. In addition, due to widespread interest, their use in catalysis or as ligands in coordination chemistry is highlighted.

Coupling of Reformatsky Reagents with Aryl Chlorides Enabled by Ylide-Functionalized Phosphine Ligands

The coupling of aryl chlorides with Reformatsky reagents is a desirable strategy for the construction of α‐aryl esters but has so far been substantially limited in the substrate scope due to many challenges posed by various possible side reactions. This limitation has now been overcome by the tailoring of ylide‐functionalized phosphines to fit the requirements of Negishi couplings. Record‐setting activities were achieved in palladium‐catalyzed arylations of organozinc reagents with aryl electrophiles using a cyclohexyl‐YPhos ligand bearing an ortho‐tolyl‐substituent in the backbone. This highly electron‐rich, bulky ligand enables the use of aryl chlorides in room temperature couplings of Reformatsky reagents. The reaction scope covers diversely functionalized arylacetic and arylpropionic acid derivatives. Aryl bromides and chlorides can be converted selectively over triflate electrophiles, which permits consecutive coupling strategies.

Easy Access to Enantiomerically Pure Heterocyclic Silicon-Chiral Phosphonium Cations and the Matched/Mismatched Case of Dihydrogen Release

Phosphonium ions are widely used in preparative organic synthesis and catalysis. The provision of new types of cations that contain both functional and chiral information is a major synthetic challenge and can open up new horizons in asymmetric cation-directed and Lewis acid catalysis. We discovered an efficient methodology towards new Si-chiral four-membered CPSSi* heterocyclic cations. Three synthetic approaches are presented. The stereochemical sequence of anchimerically assisted cation formation with B(C6 F5 )3 and subsequent hydride addition was fully elucidated and proceeds with excellent preservation of the chiral information at the stereogenic silicon atom. Also the mechanism of dihydrogen release from a protonated hydrosilane was studied in detail by the help of Si-centered chirality as stereochemical probe. Chemoselectivity switch (dihydrogen release vs. protodesilylation) can easily be achieved through slight modifications of the solvent. A matched/mismatched case was identified and the intermolecularity of this reaction supported by spectroscopic, kinetic, deuterium-labeling experiments, and quantum chemical calculations.

Towards the rational design of ylide-substituted phosphines for gold(i)-catalysis: from inactive to ppm-level catalysis

The implementation of gold catalysis into large-scale processes suffers from the fact that most reactions still require high catalyst loadings to achieve efficient catalysis thus making upscaling impractical. Here, we report systematic studies on the impact of the substituent in the backbone of ylide-substituted phosphines (YPhos) on the catalytic activity in the hydroamination of alkynes, which allowed us to increase the catalyst performance by orders of magnitude. While electronic changes of the ligand properties by introduction of aryl groups with electron-withdrawing or electron-donating groups had surprisingly little impact on the activity of the gold complexes, the use of bulky aryl groups with ortho-substituents led to a remarkable boost in the catalyst activity. However, this catalyst improvement is not a result of an increased steric demand of the ligand towards the metal center, but due to steric protection of the reactive ylidic carbon centre in the ligand backbone. The gold complex of the thus designed mesityl-substituted YPhos ligand Y_MesPCy₂, which is readily accessible in one step from a simple phosphonium salt, exhibited a high catalyst stability and allowed for turnover numbers up to 20 000 in the hydroamination of a series of different alkynes and amines. Furthermore, the catalyst was also active in more challenging reactions including enyne cyclisation and the formation of 1,2-dihydroquinolines.

Iminophosphorano-Substituted Bispyridinylidenes: Redox Potentials and Substituent Constants from Tolman Electronic Parameters

Bispyridinylidenes (BPYs) have emerged as an important class of neutral organic electron donors, with redox potentials that vary widely with choice of substituent. Methods to predict the effect of substitution on the redox potential are therefore highly desirable. Here we show that the redox potential of BPYs featuring iminophosphorano substituents (R₃ P=N-), which represent the most reducing class of BPYs, can be predicted based on the well-known Tolman electronic parameter (TEP) for the respective phosphine fragment (R₃ P). Moreover, building on earlier work relating redox potentials to Hammett-type substituent constants, it is now possible to quantitatively predict σ_p ⁺ values for iminophosphorano substituents from TEP values. These results provide a path for precisely tailoring redox potentials of iminophosphorano-substituted BPYs, but also give quantitative descriptors for how these highly versatile iminophosphorano substituents can impact the properties of any molecular scaffold.

Cationic Phosphorus Compounds Based on a Bis(1-piperidinyl)-Substituted Carbodiphosphorane: Syntheses, Structures, and Csp3–H Activation

The use of the bis(1-piperidinyl)-substituted carbodiphosphorane (Ph₂(Pip)P)₂C (1) as an NCN ligand for the stabilization of phosphorus cations was studied. A simple ligand for halide exchange allowed the synthesis and isolation of a series of phosphorus monocations of the type [1-PR₂]⁺ (with R = Cl, Br, I, CyCl, Ph). These cations exhibit characteristic NMR and structural properties which nicely correlate with the charge at the central phosphorus atom and the interaction between the ligand and the PR₂ moiety. Halide abstraction from the monocations does not result in isolable dicationic compounds but in an unexpected intramolecular C_sp³–H activation in the piperidinyl group. DFT studies show that the selective activation of the CH₂ group next to the nitrogen atom instead of a CH group at the phenyl substituents proceeds via an iminium intermediate formed by hydride transfer from the carbon atom to the cationic phosphorus center. This observation clearly demonstrates the pronounced π acidity of the dicationic phosphorus species in comparison to compounds with a further π-donor substituent.

Trialkylphosphines Having a Bulky Phosphacyclopentane Backbone: Structural and Redox Properties Depending on the Exocyclic Alkyl Groups and EPR Observation of a Persistent Trialkylphosphine Radical Cation

Bulky phosphines and their redox properties have received increased attention in the view of useful auxiliary ligands for transition metal catalysts and Lewis-base components of frustrated Lewis pairs for chemical transformations. Herein we report the synthesis, structure, and properties of a series of trialkylphosphines 2R (R = methyl, ethyl, isopropyl, tert-butyl, 1-adamantyl) that possess the bulky 2,2,5,5-tetrakis(trimethylsilyl)-1-phosphacyclopentane as a structural backbone. Among these phosphines, 2Ad, which contains an adamantyl moiety, has a very large buried volume (%V_bur) for a trialkylphosphine (62.0) and shows a quasi-reversible oxidative wave at a lower oxidation potential (-0.12 V in CH₂Cl₂, vs ferrocene/ferrocenium couple) by cyclic voltammetry. The reaction of 2Ad with AgPF₆ afforded a cationic silver aquo complex [Ag(2Ad)(H₂O)]⁺[PF₆]^-, whereas the reaction with NOSbF₆ gave a persistent phosphine radical cation [2Ad]^•+. Based on the EPR spectra and DFT studies, the spin and positive charge of [2Ad]^•+ are localized on the phosphorus atom.

Efficient Pd-Catalyzed Direct Coupling of Aryl Chlorides with Alkyllithium Reagents

Organolithium compounds are amongst the most important organometallic reagents and frequently used in difficult metallation reactions. However, their direct use in the formation of C-C bonds is less established. Although remarkable advances in the coupling of aryllithium compounds have been achieved, Csp2 -Csp3 coupling reactions are very limited. Herein, we report the first general protocol for the coupling or aryl chlorides with alkyllithium reagents. Palladium catalysts based on ylide-substituted phosphines (YPhos) were found to be excellently suited for this transformation giving high selectivities at room temperature with a variety of aryl chlorides without the need for an additional transmetallation reagent. This is demonstrated in gram-scale synthesis including building blocks for materials chemistry and pharmaceutical industry. Furthermore, the direct coupling of aryllithiums as well as Grignard reagents with aryl chlorides was also easily accomplished at room temperature.

Gold-Catalyzed Intermolecular Alkyne Hydrofunctionalizations—Mechanistic Insights

An overview of the current state of mechanistic understanding of gold-catalyzed intermolecular alkyne hydrofunctionalization reactions is presented. Moving from the analysis of the main features of the by-now-generally accepted reaction mechanism, studies and evidences pointing out the mechanistic peculiarities of these reactions using different nucleophiles HNu that add to the alkyne triple bond are presented and discussed. The effects of the nature of the employed alkyne substrate and of the gold catalyst (employed ligands, counteranions, gold oxidation state), of additional additives and of the reaction conditions are also considered. Aim of this work is to provide the reader with a detailed mechanistic knowledge of this important reaction class, which will be invaluable for rapidly developing and optimizing synthetic protocols involving a gold-catalyzed alkyne hydrofunctionalization as a reaction step.