Cooperative Chirality and Sequential Energy Transfer in a Supramolecular Light-Harvesting Nanotube

Donor-acceptor mixed-ligand MOF with energy transfer-mediated high-efficiency singlet oxygen generation for boosted organic photosynthesis

Integrating energy donor and acceptor chromophores as ligands within one MOF for advanced artificial photosynthesis is of great interest but appears to be a major challenge. Herein, via a simple one-pot synthetic strategy, an energy acceptor porphyrin ligand 5,15-di(p-benzoato)porphyrin (H2DPBP) was successfully integrated into an energy donor 1,4-naphthalenedicarboxylic acid (H2NDC)-based MOF (UiO-66-NDC) to construct a mixed-ligand MOF, donated as UiO-66-NDC-H2DPBP. Benefiting from the ample overlap between the emission spectrum of H2NDC and the absorption spectrum of H2DPBP, an efficient energy transfer (EnT) process from the donor H2NDC to the acceptor H2DPBP within UiO-66-NDC-H2DPBP can occur and be captured by time-resolved spectroscopy. Furthermore, the singlet oxygen (1O2) generation efficiency of UiO-66-NDC-H2DPBP mediated by this EnT process as well as the EnT process from the triplet state (T1) of the photosensitizer H2DPBP ligand to the ground state of molecular oxygen (3O2) upon light irradiation can be maximized via simply regulating the loading amount of H2DPBP, leading to boosted photocatalytic activities toward important aerobic oxidation reactions of amines and sulfides, even under sunlight and ambient air. This work explores an avenue to construct high-efficiency energy donor and acceptor-based light-harvesting systems by utilizing mixed-ligand MOFs as platforms to advanced artificial photosynthesis.

Controlling Circularly Polarized Luminescence Enabled by Chirality and Energy Transfer from Optimized Chiral Molecules to Quantum Dots

Chirality transfer/amplification and energy transfer in artificial assembly systems are longstanding challenges inspired by biological systems. In particular, controlling intercomponent interactions to engineer CPL-active materials in multicomponent chiral coassemblies remains difficult. Here, we report the simultaneous realization of chirality and energy transfer in self-assembled hybrid systems comprising quantum dots with high photoluminescence quantum yield and organic molecules featuring aggregation-induced emission (AIE). Three chiral AIE molecules based on the tetraphenylethylene core, differing in the number and/or position of alkyl chains, were designed and synthesized. These structural variations led to distinct self-assembled morphologies, including helical fibrils, fibril bundles, and ribbons. Co-assembly with luminescent CdSe/CdS nanorods yielded organic-inorganic hybrid nanocomposites, where chirality transfer from the organic molecules to the nanorods strongly depended on the molecular structure. In parallel, efficient energy transfer from chiral donors to the nanorod acceptors was observed across all systems. Notably, the synergistic action of both chirality and energy transfer enabled the construction of CPL-active materials with high luminescence asymmetry factors. This work presents a strategy for designing chiroptical systems with enhanced chiroptical performance.

Advances in chiral luminescent liquid crystals (CLLCs): from molecular design to applications

Research on circularly polarized luminescent (CPL) materials has evolved into a hot research topic because of their potential application prospects in the optoelectronics and chiroptical fields. Achieving a high glum value and high quantum efficiency is essential and challenging in CPL research. To date, various material design strategies, such as chiral organic small molecules, CPL polymers, chiral lanthanide complexes, chiral liquid crystals and supramolecular self-assembly, have been proposed to achieve a CPL emitter with a high glum value. Among them, chiral luminescent liquid crystals (CLLCs) are recognized as a key approach for achieving CPL materials with a high glum factor owing to their exceptional optical properties and flexibility. In this review, we focused on the various synthesis methods employed for developing CLLCs, their properties and their potential applications. The synthesis section discusses various approaches employed to design chiral luminescent liquid crystals, including (i) doping systems for incorporating chiral dopants into achiral liquid crystalline hosts and (ii) nondoping methods for preparing AIE active chiral luminescent liquid crystalline materials. The section on properties highlights how chirality influences the optical, electronic and structural characteristics of CLLCs. Finally, we discuss the diverse applications of CLLCs from photonics and chiral switching to optoelectronic devices and beyond. This review provides new insights into recent research developments and future opportunities in this booming research field. We anticipate that this review could offer a clear picture of the interesting properties of chiral luminescent liquid crystal materials and inspire more researchers to work in this potential area.

Circular dichroism measurement of a single anisotropic chiral nanostructure using scanning circular dichroism microscopy

Circular dichroism (CD) spectroscopy is widely used to study the chiroptical properties of chiral materials, including films, solutions, and isotropic materials. However, measuring the CD signal of single anisotropic chiral nanostructures is challenging due to the presence of "artifact" signals, such as linear dichroism (LD) and linear birefringence (LB). In this study, we employed scanning circular dichroism microscopy (SCDM) to extract the intrinsic CD signal of the single DBD/LBL self-assembled chiral supramolecule. Using the Stokes-Mueller formalism, we analyzed the SCDM signal, which exhibited a sinusoidal dependence on the polarization angles of the laser beam. This approach enabled the determination of both the orientation and the intrinsic CD. The intrinsic CD of the single DBD self-assembled chiral supramolecule was 9.9 mdeg, while that of the single LBL self-assembled chiral supramolecule was -9.3 mdeg. SCDM provides a new method for measuring CD at the nanoscale, paving the way for future advancements in optoelectronic applications and introducing an approach for studying chiral nanomaterials.

Supramolecular Charge-Transfer Approach for Tunable and Efficient Circularly Polarized Delayed Fluorescence and Phosphorescence

Achieving efficient circularly polarized luminescence (CPL) with a high luminescence dissymmetry factor (|glum|) in purely organic systems is a vibrant and rapidly evolving field of research. Recently, the growing interest in ambient organic phosphors has offered a promising alternative for achieving CPL with remarkable quantum yields by utilizing triplet states. While supramolecular charge-transfer (CT) interactions are well-established to improve |glum| by enhancing magnetic transition dipole components, their application to triplet-harvesting organic systems remains unexplored. In this context, our current work introduces a supramolecular strategy to achieve highly efficient and tunable circularly polarized thermally activated delayed fluorescence (TADF) and phosphorescence by the involvement of intermolecular triplet CT states. Through-space intermolecular CT interactions between heavy atom-substituted bis-chromophoric pyromellitic diimides (PmDIs) (acceptors) and achiral phenyl carbazole derivatives (donors) enable one of the most efficient circularly polarized delayed luminescent systems, characterized by a high quantum yield (∼46%) and a significant |glum| ∼3.6 × 10⁻2. Additionally, the modularity of this non-covalent design allows for the tuning of emission from the orange to deep-red regions by incorporating various donors. The strategy presented here opens new avenues for designing efficient CPL-active organic phosphors.

Real-Time Observation of Ultrafast Concerted Dynamics between Energy and Chirality Transfer by Femtosecond Time-Resolved Circular Polarization Luminescence Spectroscopy

Elucidating the underlying mechanism of effective chirality and energy transfer processes observed in biological assemblies has cross-disciplinary significance, and it is of special interest in the fields of chemistry and biology due to the pivotal role of chirality in life. Challenges in the field include how to achieve real-time monitoring of the chirality and energy transfer dynamics simultaneously, as well as how to distinguish whether these processes take place in the ground or excited state. Herein, we achieve the first attempt at real-time observation of the concerted ultrafast dynamics between the Förster resonance energy transfer (FRET) and the generation of circularly polarized luminescence (CPL) in the excited state in near-infrared CPL supramolecular nanofibers (SNFs) by using femtosecond time-resolved circularly polarized luminescence (fs-TRCPL) spectroscopy. Our findings reveal a cooperative interplay between FRET and CPL emission, unfolding over time scales from several to hundreds of picoseconds. Notably, we identify that the pivotal mechanism leading to a 0.045 glum value in SNFs is the difference in the FRET rates between left- and right-handed circularly polarized emission channels, which is a reason beyond the well-known relationship of the electronic and magnetic dipoles. Our results not only shed light on the understanding of the chirality transfer mechanism in the excited states but also pave the road for the development of novel CPL materials in the future.

Construction of Carbon Dot-Based Color-Tunable Circularly Polarized Long Afterglow via in Situ Phosphorescence Resonance Energy Transfer

Carbon dots (CDs) with circularly polarized long afterglow (CPLA) properties have received increasing attention as a cutting-edge research field. However, because the CDs with both long afterglow and chirality are difficult to prepare and the afterglow color of most phosphorescent CDs is mainly concentrated in short wavelengths, it is still a formidable challenge to explore a facile route to achieve intrinsic CD-based color-tunable CPLA materials on a large scale. Herein, we developed a facile gram-scale synthesis method to prepare intrinsic CD-based color-tunable CPLA materials via a simple hydrothermal mixture of boric acid, arginine, and various fluorescent dyes. The tunable afterglow color is successfully achieved by engineering in situ phosphorescence resonance energy transfer (PRET) between the CDs formed by carbonization of arginine with some of the dyes and those uncarbonized dyes. Finally, the applications of CD composites in multimode advanced anti-counterfeiting and information encryption were explored.

Supramolecular rosette intermediated homochiral double helix

Precise organization of organic molecules into homochiral double-helix remains a challenge due to the difficulty in controlling both self-assembly process and chirality transfer across length scales. Here, we report that a type of bisnaphthalene bisurea molecule could assemble into chirality-controlled nanoscale double-helices by a supramolecular rosette-intermediated hierarchical self-assembly mechanism. A solvent-mixing self-assembly protocol is adopted to direct bisnaphthalene bisurea cyclization into chiral discrete rosettes through cooperative intramolecular and intermolecular hydrogen bonds. Controlled hexagonal packing of rosettes at higher concentrations gives one-dimensional single-stranded nanofibers, which intertwine into well-defined double-helix nanostructures with preferred chirality that depends on the absolute configurations of bisnaphthalene bisurea. The hierarchical organization of bisnaphthalene bisurea molecules enables effective excitation energy delocalization within the double-helix, which contributes to near-unity energy transfer from double-helix to adsorbed acceptor dyes even in donor/acceptor ratios over 1000, leading to bright circularly polarized luminescence from the originally achiral acceptor. The experimental and theoretical simulation results not only provide a hierarchical strategy to fabricate homochiral double-helix but also bring insights in understanding the high-efficiency light-harvesting process in photosystem II.

Chiral Rotaxane-Branched Dendrimers as Relays in Artificial Light-Harvesting Systems with Boosted Circularly Polarized Luminescence

Starting from AIEgen-functionalized chiral [2]rotaxane building block, we have successfully synthesized a new class of chiral rotaxane-branched dendrimers through controllable divergent strategy for the first time, based on which novel chiral artificial light-harvesting systems (LHSs) were successfully constructed in aqueous phase by sequentially introducing achiral donor and acceptor. More importantly, accompanied by the two-step Förster resonance energy transfer (FRET) process in the resultant artificial LHSs, the sequentially amplified circularly polarized luminescence (CPL) performances were achieved, highlighting that the chiral rotaxane-branched dendrimers could serve as excellent relay for both energy transfer and chirality transmission. Impressively, compared with the sole chiral rotaxane-branched dendrimers, the dissymmetry factors (glum) values of the resultant artificial LHSs were amplified by one order of magnitude up to 0.038, enabling their further applications in information storage and encryption. The proof-of concept study provides not only a feasible approach for the efficient amplification of CPL performances but also a novel platform for the construction of novel chiral luminescent materials.

White circularly polarized luminescence from a dual-component emitter induced by FRET between tetraphenylene and PDI derivatives

A chiral agent, TPE-ASP, incorporating aspartic acid as the chiral source and tetraphenylene derivatives as chromophores, was designed and synthesized. The chiral agent was self-assembled into regular spherical nanoparticles with a maximum luminescence asymmetry factor of |2.41 × 10-2| at 460 nm which is attributed to TPE-ASP. These nanoparticles can be co-assembled with a perylenediimide (PDI) derivative through electrostatic interactions, enabling the successful construction of a chiral light-harvesting system (C-LHS). The maximum Förster resonance energy transfer (FRET) efficiency (ΦET) of 94.7% was achieved at the optimal molar ratio of TPE-ASP to PDI. Fortunately, multicolour circularly polarized luminescence (CPL), spanning from blue to red, was successfully achieved with a two-component co-assembly system, and bright white CPL with CIE coordinates of (0.33, 0.32) was also obtained. Meanwhile, the average glum is |7.1 × 10-3| in the wavelength range of 400-700 nm. This discovery demonstrates the potential for spectral regulation through the two-component co-assembly strategy. It is significant for developing CPL devices with white light emission via the FRET process and also expands the functional range of chiral light-harvesting systems.

Artificial Light-Harvesting Systems with a Three-Step Sequential Energy Transfer Mechanism for Efficient Photocatalytic Minisci-Type Late-Stage Functionalization

The natural process of photosynthesis involves a series of consecutive energy transfers, but achieving more steps of efficient energy transfer and photocatalytic organic conversion in artificial light-harvesting systems (ALHSs) continues to pose a significant challenge. In the present investigation, a range of ALHSs showcasing a sophisticated three-step energy transfer mechanism is designed, which are meticulously crafted using pillar[5]arene (WP[5]) and p-phenylenevinylene derivative (PPTPy), utilizing host-guest interactions as energy donors. Three distinct types of fluorescent dyes, namely Rhodamine B (RhB), Sulforhodamine 101 (SR101), and Cyanine 5 (Cy5), are employed as acceptors of energy. Starting from PPTPy-2WP[5], energy is sequentially transferred to RhB, SR101, and Cy5, successfully constructing a multi-step continuous energy transfer system with high energy transfer efficiency. More interestingly, as energy is progressively transferred, the efficiency of superoxide anion radical (O2 •-) generation gradually increased, while the efficiency of singlet oxygen (1O2) generation decreased, achieving the transformation from type II photosensitizer to type I photosensitizer. Furthermore, in order to fully utilize the energy harvested and reactive oxygen species (ROS) obtained, the ALHSs employ a multi-step sequential energy transfer process to enhance Minisci-type alkylation reactions with aldehydes through photocatalysis for late-stage functionalization in an aqueous environment, achieving a 91% yield.

Organic Circularly Polarized Room-Temperature Phosphorescence: Strategies, Applications and Challenges

Organic circularly polarized luminescence (CPL) plays crucial roles in chemistry and biology for the potential in chiral recognition, asymmetric catalysis, 3D displays, and biological probes. The long-lived luminescence, large Stokes shift, and unique chiroptical properties make organic circularly polarized room-temperature phosphorescence (CPP) a new research hotspot in recent years. Nevertheless, achieving high-performance organic CPP is still challenging due to the sensitivity and complexity of integrating triplet excitons and polarization within organic materials. This review summarizes the latest advances in organic CPP, ranging from design strategies and photophysical properties to underlying luminescence mechanisms and potential applications. Specifically, the design strategies for generating CPP are systemically categorized and discussed according to the interactions between chiral units and chromophores. The applications of organic CPP in organic light-emitting diodes, sensing, chiral recognition, afterglow displays, and information encryption are also illustrated. In addition, we present the current challenges and perspectives on developing organic CPP. We expect this review to provide some instructive design principles to fabricate high-performance organic CPP materials, offering an in-depth understanding of the luminescence mechanism and paving the way toward diverse practical applications.

Hollow Superhelices Based on Chiral Europium Coordination Polymers

The construction of helical nanotubes based on chiral coordination polymers (CPs) is an intriguing but challenging task, which is important for the development of functional materials that combine macroscopic chirality with tube-related properties. Here, we selected a chiral europium phosphonate system, e. g., Eu(NO3)3/R-,S-pempH2, and carried out a systematic work. By controlling the hydrothermal reaction conditions such as the pH value of the reaction mixture, the molar ratio and concentration of the reactants, we obtained block-like crystals of R/S-1 b, rod-like crystals of R/S-3 r, hollow superhelices of R/S-2 hh, and solid superhelices of R/S-4 sh. In the latter two cases, the chirality has been successfully transferred and amplificated from the molecular level to the macroscopic level. Interestingly, compounds R/S-2 hh and R/S-4 sh have the same chemical composition of Eu(R/S-pempH)3⋅2H2O and show identical PXRD patterns, thus can be considered as the same material except for different morphologies. We further investigated their circularly polarized luminescence (CPL) properties and found that the hollow superhelix of R/S-2 hh had a larger dissymmetry factor than the solid superhelix of R/S-4 sh. This study not only provides the first example of hollow superhelices of chiral CPs, but also offers the possibility of modulating the chiroptical properties of CPs through morphological control.

Preparation and Structural Properties of Gel Coating Films Containing Lipophilized Nanocarbon Particles Functionalized with Thixotropic Chains

Gel coating films comprising nanodiamonds organo-modified with 12-hydroxystearic (12-OHC18 ) and stearic acids were prepared and characterized. Because molecules with 12-OHC18 groups can convert solvents into thixotropic gels, Gemini-type diamide derivatives with two 12-OHC18 chains were also introduced as thixotropic additives into the gel coating films. Although the 12-OHC18 -modified nanodiamonds did not lead to solvent gelation on their own, they displayed an affinity for the thixotropic additive molecules. The 12-OHC18 -modified nanodiamonds were localized near the surface of the nanofibers formed by the Gemini-type diamide derivative in the solvent, and the thixotropic properties of the supramolecular gel were confirmed. Nanoparticle aggregation and nanofiber crystallinity were found to be suppressed by the effect of 12-OHC18 modification in the gel coating films, making them suitable for cosmetic coating applications.

Photo-Induced Radical Generation of Supramolecular Gel with Sign-Inverted and White-Light Circularly Polarized Luminescence

The realization of persistent luminescence and in particular circularly polarized luminescence (CPL) of organic radicals remains a challenge due to their sensitivity to oxygen at ambient conditions and elusive excited state chirality control. Here, it is reported that UV-irradiation on a supramolecular gel from a chiral triarylamine derivative, TPA-Ala, led to the formation of luminescent radicals with bright CPL. TPA-Ala can form an organogel in chloroform with blue emission and supramolecular chirality as demonstrated by both CD and CPL signals. Upon UV 365 nm irradiation, an emission color change from blue to cyan is observed due to the formation of photo-induced radicals. Interestingly, it is found that the supramolecular gel radicals showed stable luminescence with a lifetime ≈ 10 days in dark environments and inverted CPL, which represents a scarce example with persistent CPL from doublet-state due to oxygen isolation ability of the gel network. Furthermore, doping a guest dye, Rhodamine B (RhB), into the supramolecular gel (RhB/TPA-Ala = 30% in molar ratio) successfully obtained a transient white-light CPL through the superposition of photo-induced radical and guest dye emissions. This work provides a useful methodology for the fabrication of radical-based CPL materials via a supramolecular assembly approach.

Mechanically Twisting-Induced Top-Down Chirality Transfer for Tunable Full-Color Circularly Polarized Luminescent Fibers

Circularly polarized luminescence (CPL) materials with rich optical information are highly attractive for optical display, information storage, and encryption. Although previous investigations have shown that external force fields can induce CPL activity in nonchiral systems, the unique role of macroscopic external forces in inducing CPL has not been demonstrated at the level of molecule or molecular aggregate. Here, a canonical example of CPL generation by mechanical twisting in an achiral system consisting of a polymer matrix with embedded fluorescent molecules is presented. By carefully adjusting the twisting parameters in time and space, in conjunction with circular dichroism (CD), CPL, and 2D wide-angle X-ray scattering (2D WAXS) studies, a twisting-induced top-down chiral transfer mechanism derived from the molecular-level asymmetric rearrangement of fluorescent units is elucidated within polymers under external torsional forces. This top-down chiral transfer provides a simple, scalable, and versatile mechanical twisting strategy for the fabrication of CPL materials, allowing for fabricating full-color and handedness-tunable CPL fibers, where the macroscopic twist direction determines the CPL handedness. Moreover, the weavability of CPL fibers greatly extend their applications in anti-counterfeit encryption, as demonstrated by using embroidery techniques to design multilevel encryption patterns.

Oxidation Triggered Supramolecular Chirality

Topochemical reactions normally occurring in the solid and crystalline state exhibit solvent-free and catalyst-free properties, with high atom economy properties, which have been widely applied in materials science and polymer synthesis. Herein, we explore the potential of topochemical reactions for controlling the emergence of supramolecular chirality and the precise fabrication of chiroptical materials. Boronic acid pinacol esters (BPin) were conjugated to naphthalimides containing an inherent chiral cholesteryl group linked by alkyl or benzene spacers. The BPin segments were oxidized by H2O2 to form hydroxyl groups, which enhanced luminescence, reduced steric effects, and increased amphiphilicity. The inherent liposomal aggregates underwent in situ oxidation and transformed into 1D nanoarchitectures, exhibiting macroscopic chirality, active Cotton effects, and circularly polarized luminescence. Oxidation could also initiate an intimate interplay between the building units and the guest molecule, by which the chirality and chiroptical evolution in the multiple component chiral assembly system were realized.

Recent Advances of Organic Cocrystals in Emerging Cutting-Edge Properties and Applications

Organic cocrystals, representing one type of new functional materials, have gathered significant interest in various engineering areas. Owing to their diverse stacking modes, rich intermolecular interactions and abundant functional components, the physicochemical properties of organic cocrystals can be tailored to meet different requirements and exhibit novel characteristics. The past few years have witnessed the rapid development of organic cocrystals in both fundamental characteristics and various applications. Beyond the typical properties like ambipolarity, emission tuning ability, ferroelectricity, etc. that are previously well demonstrated, many novel, impressive and cutting-edge properties and applications of cocrystals are also emerged and advanced recently. Especially during the nearest five years, photothermal conversion, room-temperature phosphorescence, thermally activated delay fluorescence, circularly polarized luminescence, organic solid-state lasers, near-infrared sensing, photocatalysis, batteries, and stimuli responses have been reported. In this review, these new properties are carefully summarized. Besides, some neoteric architecture and methodologies, such as host-guest structures and machine learning-based screening, are introduced. Finally, the potential future developments and expectations for organic cocrystals are discussed for further investigations on multiple functions and applications.

Induced Circularly Polarized Luminescence From 0D Quantum Dots by 2D Chiral Nanosheets

Materials with circularly polarized luminescence (CPL) exhibit great application potential in biological scenes such as cell imaging, optical probes, etc. However, most developed materials are non-aqueous and toxic, which seriously restricts their compatibility with the life systems. Thus, it is necessary to explore a water-based CPL system with high biocompatibility so that to promote the biologic application process. Herein, a facile and efficient route to achieve the CPL properties of a functional aqueous solution is demonstrated by the combination of 0D quantum dots (QDs) and 2D chiral nanosheets. Benefited by the specific absorption ability of nanosheets for left/right-handed CPL, the QDs adsorbed onto the surface of nanosheets through hydrogen bond interactions showed apparent CPL features. In addition, this system has a good extensibility as the CPL property can be effectively regulated by changing the kind of emissive QDs. More importantly, this water-based nano-composite with facile fabrication process (one-step mixing) is suitable for the real applications, which is undoubtedly beneficial for the further progress of functional CPL materials.

Efficient multicolour and white circularly polarized luminescence from liquid crystalline polymer networks

Twelve liquid crystalline polymer network films were fabricated through photopolymerization of cholesteric liquid-crystalline mixtures containing two aggregation-induced emissive-active luminogens. The films exhibit multicolour and white circularly polarized luminescence with dissymmetry factors up to 0.85 and fluorescence quantum yields up to 90%.

A Halogen-Bonded Fluorescent Molecular Photoswitch: Transition from 3D Cubic Lattice to 1D Helical Superstructure for Polarization Inversion of Circularly Polarized Luminescence

The fabrication of materials that can switch between circularly polarized luminescence (CPL) signals is both essential and challenging. Here, two new halogen-bonded fluorescent molecular photoswitches, namely, HB-switch 1 and HB-switch 2, containing α-cyano-substituted diarylethene compounds with different end groups were developed. Upon exposure to specific UV or visible light wavelengths, they exhibited controllable and reversible Z/E photoisomerization. When these switches were integrated into blue-phase liquid crystals (BPLCs), the temperature range of BP significantly expanded. Notably, the BP system incorporating HB-switch 1 exclusively achieved reversible polarization inversion of CPL signals under irradiation with specific UV/Visible light and during cooling/heating. The photo/thermal dual-response behavior of the CPL signals can be attributed to the phase transition from a high-symmetry 3D BP Icubic lattice to a low-symmetry 1D helical superstructure induced by the Z/E photoisomerization of HB-switch 1 and temperature changes. This study underscores the significance of employing halogen-bond assembly strategies to design materials with switchable CPL signals, opening new possibilities for CPL-active systems.

Enhancing Circularly Polarized Electroluminescence through Energy Transfer within a Chiral Polymer Host

Organic light-emitting diodes (OLEDs) that are able to emit high levels of circularly polarized (CP) light hold significant promise in numerous future technologies. Such devices require chiral emissive materials to enable CP electroluminescence. However, the vast majority of current OLED emitter classes, including the state-of-the-art triplet-harvesting thermally activated delayed fluorescence (TADF) materials, produce very low levels of CP electroluminescence. Here a host-guest strategy that allows for energy transfer between a chiral polymer host and a representative chiral TADF emitter is showcased. Such a mechanism results in a large amplification of the circular polarization of the emitter. As such, this study presents a promising avenue to further boost the performance of circularly polarized organic light-emitting diode devices, enabling their further development and eventual commercialization.

Handedness-Inverted and Stimuli-Responsive Circularly Polarized Luminescent Nano/Micromaterials Through Pathway-Dependent Chiral Supramolecular Polymorphism

The precise manipulation of supramolecular polymorphs has been widely applied to control the morphologies and functions of self-assemblies, but is rarely utilized for the fabrication of circularly polarized luminescence (CPL) materials with tailored properties. Here, this work reports that an amphiphilic naphthalene-histidine compound (NIHis) readily self-assembled into distinct chiral nanostructures through pathway-dependent supramolecular polymorphism, which shows opposite and multistimuli responsive CPL signals. Specifically, NIHis display assembly-induced CPL from the polymorphic keto tautomer, which become predominant during enol-keto tautomerization shifting controlled by a bulk solvent effect. Interestingly, chiral polymorphs of nanofiber and microbelt with inverted CPL signals can be prepared from the same NIHis monomer in exactly the same solvent compositions and concentrations by only changing the temperature. The tunable CPL performance of the solid microbelts is realized under multi external physical or chemical stimuli including grinding, acid fuming, and heating. In particular, an emission color and CPL on-off switch based on the microbelt polymorph by reversible heating-cooling protocol is developed. This work brings a new approach for developing smart CPL materials via supramolecular polymorphism engineering.

Multi-Step and Switchable Energy Transfer in Photoluminescent Organosilicone Capsules

Light-harvesting is of vital importance for many events, such as photosynthesis. To efficiently gather and transfer solar energy, delicate antenna is needed, which has been achieved by algae and plants. However, construction of efficient light-harvesting systems using multiple, artificial building blocks is still challenging. Here, blue-emitting organosilicone capsules containing carbon dots (denoted as CDs-Si) in ethanol are prepared, which can effectively transfer energy to green-emitting (silicone-functionalized bodipy, Si-BODIPY) or red-emitting (rhodamine b, RhB) dyes. In ternary system, sequential Förster resonance energy transfer from CDs-Si to Si-BODIPY and further to RhB is realized, which is accompanied with a less pronounced, parallel FRET directly from CDs-Si to RhB. The overall efficiency of energy transfer reaches ≈86%. By introducing a photoswitch (1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)-3,3,4,4,5,5-hexafluoro-1-cyclopentene, DAE) to the system, the emission becomes switchable under alternative illumination with UV and visible light, leading to the formation of smart artificial light-harvesting systems.

Comprehensive Study of Artificial Light-Harvesting Systems with a Multi-Step Sequential Energy Transfer Mechanism

Artificial light-harvesting systems (LHSs) with a multi-step sequential energy transfer mechanism significantly enhance light energy utilization. Nonetheless, most of these systems exhibit an overall energy transfer efficiency below 80%. Moreover, due to challenges in molecularly aligning multiple donor/acceptor chromophores, systems featuring ≥3-step sequential energy transfer are rarely reported. Here, a series of artificial LHSs is introduced featuring up to 4-step energy transfer mechanism, constructed using a cyclic peptide-based supramolecular scaffold. These LHSs showed remarkably high energy transfer efficiencies (≥90%) and satisfactory fluorescence quantum yields (ranging from 17.6% to 58.4%). Furthermore, the structural robustness of the supramolecular scaffold enables a comprehensive study of these systems, elucidating the associated energy transfer pathways, and identifying additional energy transfer processes beyond the targeted sequential energy transfer. Overall, this comprehensive investigation not only enhances the understanding of these LHSs, but also underscores the versatility of cyclic peptide-based supramolecular scaffolds in advancing energy harvesting technologies.

Supramolecular Sequential Light-Harvesting Systems for Constructing White LED Device and Latent Fingerprint Imaging

The fabrication of supramolecular light-harvesting systems (LHS) with sequential energy transfer is of significance in utilizing light energy. In this study, we report the non-covalent self-assembly of a sequential LHS by pillar[5]arene-based host-guest interaction in water and its applications in white light-emitting diode (LED) device and latent fingerprint imaging. The host-guest complex WP5 ⊃ ${ \supset }$ G self-assembles into nanoparticles in water and shows enhanced aggregation-induced emission (AIE) effect. The nanoparticles can be further used to construct sequential LHS with fluorescent dyes 4,7-di(2-thienyl)-benzo[2,1,3]thiadiazole (DBT) and sulforhodamine 101 (SR101). Impressively, the system shows white-light emission when the molar ratio of WP5 ⊃ ${ \supset }$ G/DBT/SR101 is 1100/2/16. The material can be coated on a LED bulb to achieve white-light emission. In addition, the sequential LHS exhibit multicolor fluorescence including red emission, which have been successfully applied to high-resolution imaging of latent fingerprints. Therefore, we demonstrated a general strategy for the construction of sequential LHS in water based on macrocyclic host-guest interaction and explored its multi-functional applications in white-light LED device and imaging of latent fingerprints, which will promote future development and application of supramolecular LHSs.

Supramolecular polymerization of [6]helicene-based cyano-luminogens: on the overall efficiency of self-assembled circularly polarized emitters

The synthesis of the [6]helicene-based luminophores 1 and 2 is reported. These chiral systems, endowed with cyano-stilbene fragments, form supramolecular polymers by the operation of intermolecular H-bonding interactions between the amides present in the peripheral side chains. The dissimilar disubstitution of 1 and 2 plays a crucial role in their self-assembling features. Thus, 1 does not show an efficient π-stacking of the central aromatic moiety. Instead, its self-assembling process results in a zig-zag arrangement of the monomeric units to form the aggregated species. On the other hand, 2 presents an efficient overlap of the aromatic backbones that affords a co-facial arrangement of the monomeric units. The solvent-dependent studies indicate that both [6]helicenes self-assemble following a cooperative supramolecular polymerization mechanism with a higher degree of cooperativity and stability for compound 2. The enantioenriched samples of both 1 and 2 display a rich dichroic pattern that changes when the supramolecular polymerization takes place. Furthermore, the presence of the cyano-stilbene moieties gives rise to an aggregation induced emission effect. The inherent chirality of both the monomeric and aggregated species of 1 and 2 provides the systems with CPL-emitting properties, presenting a remarkable overall CPL-efficiency, quantified by the BCPL parameter, that increases upon supramolecular polymerization.

Spatiotemporal-Dependent Confinement Effect of Bubble Swarms Enables a Fractal Hierarchical Assembly with Promoted Chirality

The submarine-confined bubble swarm is considered an important constraining environment for the early evolution of living matter due to the abundant gas/water interfaces it provides. Similarly, the spatiotemporal characteristics of the confinement effect in this particular scenario may also impact the origin, transfer, and amplification of chirality in organisms. Here, we explore the confinement effect on the chiral hierarchical assembly of the amphiphiles in the confined bubble array stabilized by the micropillar templates. Compared with the other confinement conditions, the assembly in the bubble scenario yields a fractal morphology and exhibits a unique level of the chiral degree, ordering, and orientation consistency, which can be attributed to the characteristic interfacial effects of the rapidly formed gas/water interfaces. Thus, molecules with a balanced amphiphilicity can be more favorable for the promotion. Not limited to the pure enantiomers, chiral amplification of the enantiomer-mixed assembly is observed only in the bubble scenario. Beyond the interfacial mechanism, the fast formation kinetics of the confined liquid bridges in the bubble scenario endows the assembly with the tunable hierarchical morphology when regulating the amphiphilicity, aggregates, and confined spaces. Furthermore, the chiral-induced spin selectivity (CISS) effect of the fractal hierarchical assembly was systematically investigated, and a strategy based on photoisomerization was developed to efficiently modulate the CISS effect. This work provides insights into the robustness of confined bubble swarms in promoting a chiral hierarchical assembly and the potential applications of the resulting chiral hierarchical patterns in solid-state spintronic and optical devices.

Encapsulation engineering of porous crystalline frameworks for delayed luminescence and circularly polarized luminescence

Delayed luminescence (DF), including phosphorescence and thermally activated delayed fluorescence (TADF), and circularly polarized luminescence (CPL) exhibit common and broad application prospects in optoelectronic displays, biological imaging, and encryption. Thus, the combination of delayed luminescence and circularly polarized luminescence is attracting increasing attention. The encapsulation of guest emitters in various host matrices to form host-guest systems has been demonstrated to be an appealing strategy to further enhance and/or modulate their delayed luminescence and circularly polarized luminescence. Compared with conventional liquid crystals, polymers, and supramolecular matrices, porous crystalline frameworks (PCFs) including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), zeolites and hydrogen-bonded organic frameworks (HOFs) can not only overcome shortcomings such as flexibility and disorder but also achieve the ordered encapsulation of guests and long-term stability of chiral structures, providing new promising host platforms for the development of DF and CPL. In this review, we provide a comprehensive and critical summary of the recent progress in host-guest photochemistry via the encapsulation engineering of guest emitters in PCFs, particularly focusing on delayed luminescence and circularly polarized luminescence. Initially, the general principle of phosphorescence, TADF and CPL, the combination of DF and CPL, and energy transfer processes between host and guests are introduced. Subsequently, we comprehensively discuss the critical factors affecting the encapsulation engineering of guest emitters in PCFs, such as pore structures, the confinement effect, charge and energy transfer between the host and guest, conformational dynamics, and aggregation model of guest emitters. Thereafter, we summarize the effective methods for the preparation of host-guest systems, especially single-crystal-to-single-crystal (SC-SC) transformation and epitaxial growth, which are distinct from conventional methods based on amorphous materials. Then, the recent advancements in host-guest systems based on PCFs for delayed luminescence and circularly polarized luminescence are highlighted. Finally, we present our personal insights into the challenges and future opportunities in this promising field.

A sequential light-harvesting system with thermosensitive colorimetric emission in both aqueous solution and hydrogel

Inspired by natural photosynthetic systems that feature both sequential energy transfer and temperature response, we herein report an artificial thermosensitive sequential light-harvesting system (LHS) based on an amphiphilic molecule TPEO. It self-assembles into fluorescent nanoparticles in water and shows tunable LCST behavior. By loading ESY as the first acceptor and NiR as the second acceptor into the nanoparticles, an artificial LHS with two-step FRET was successfully constructed. Interestingly, the system exhibits thermosensitive colorimetric fluorescence in both aqueous solution and hydrogel by taking advantage of a combination of LCST and sequential FRET.

Chiral Phosphorescent Carbonized Polymer Dots Relayed Light-Harvesting System for Color-Tunable Circularly Polarized Room Temperature Phosphorescence

Carbonized polymer dots (CPDs) with a circularly polarized fluorescence property have received increasing attention in recent years. However, it is still a great challenge to construct circularly polarized room-temperature phosphorescence (CPRTP) CPDs. Herein, a simple approach to the synthesis of intrinsically CPRTP CPDs for the first time by utilizing sodium alginate and l-/d-arginine as precursors under relatively mild reaction conditions is presented. Notably, the CPDs exhibit both chirality and green RTP in solid states. Furthermore, color-tunable CPRTP is successfully achieved by engineering chiral light-harvesting systems based on circularly polarized phosphorescence resonance energy transfer (C-PRET) where the CPDs with green RTP function as an initiator of chirality and light absorbance, and commercially available fluorescent dyes with different emission colors ranging from yellow to red serve as the terminal acceptors. Through one-step or sequential C-PRET, the light-harvesting systems can simultaneously furnish energy transfer and chirality transmission/amplification. Given the multicolor long afterglow, lifetime-tunable, and CPRTP properties, their potential applications in multiple information encryption are demonstrated.

Chiral Aggregation-Induced Emission Carbon Dot-Based Multicolor and Near-Infrared Circularly Polarized Delayed Fluorescence via a Light-Harvesting System

Circularly polarized luminescence (CPL) materials are the research frontier of chiral luminescence. As a kind of luminescent carbon material, carbon dots (CDs) are expected to become excellent candidates for the construction of CPL materials. However, the construction of CD-based circularly polarized afterglow emission, especially multicolor and near-infrared emission, remains a great challenge due to aggregation-caused quenching and the instability of triplet excitons. In this work, we synthesized chiral CDs with aggregation-induced emission using dithiosalicylic acid and l/d-arginine as precursors through a one-step solvothermal method. Notably, the CDs exhibit green delayed fluorescence (DF) in poly(vinyl alcohol) films. Furthermore, multicolor and near-infrared circularly polarized delayed fluorescence is successfully realized via engineering a chiral light-harvesting system in which the CDs with green DF emission act as energy donors and fluorescent dyes with emission colors ranging from yellow to the near infrared serve as energy acceptors.

Switchover from singlet oxygen to superoxide radical through a photoinduced two-step sequential energy transfer process

The competitive nature of type II photosensitizers in the transfer of excitation energy for the generation of singlet oxygen (1O2) presents significant challenges in the design of type I photosensitizers to produce the superoxide anion radical (O2˙-). In this study, we present an efficient method for the direct transformation of type II photosensitizers into type I photosensitizers through the implementation of an artificial light-harvesting system (ALHSs) involving a two-step sequential energy transfer process. The designed supramolecular complex (DNPY-SBE-β-CD) not only has the ability to generate 1O2 as type II photosensitizers, but also demonstrates remarkable fluorescence properties in aqueous solution, which renders it an efficient energy donor for the development of type I photosensitizers ALHSs, thereby enabling the efficient generation of O2˙-. Meanwhile, to ascertain the capability and practicality of this method, two organic reactions were conducted, namely the photooxidation reaction of thioanisole and oxidative hydroxylation of arylboronic acids, both of which display a high level of efficiency and exhibit significant catalytic performance. This work provides an efficient method for turning type II photosensitizers into type I photosensitizers by a two-step sequential energy transfer procedure.

Azaborahelicene fluorophores derived from four-coordinate N,C-boron chelates: synthesis, photophysical and chiroptical properties

A series of six azaborahelicenes with varying electron-donor substitution at the 4-position of the aryl residue (i.e., naphthyl) or with variable π-extension of the aryl residue (thianthrenyl, anthryl, pyrenyl) was prepared with an efficient and flexible synthetic protocol. These different types of functionalization afforded notably pronounced intramolecular charge-transfer (ICT) character for the dyes with the strongest electron donor substitution (NMe2) or easiest to oxidize aryl residues, as evidenced by photophysical investigations. These effects also impact the corresponding chiroptical properties of the separated M- and P-enantiomers, which notably display circularly polarized luminescence (CPL) with dissymmetry factors in the order of magnitude of 10-4 to 10-3. Theoretical calculations confirm the optical spectroscopy data and are in agreement with the proposed involvement of ICT processes.

Red Circularly Polarized Luminescence from Dimeric H-Aggregates of Acridine Orange by Chiral Induction

Understanding the mechanism of chirality transfer from a chiral surface to an achiral molecule is essential for designing molecular systems with tunable chiroptical properties. These aspects are explored herein using l- and d-isomers of alkyl valine amphiphiles, which self-assemble in water as nanofibers possessing a negative surface charge. An achiral chromophore, acridine orange, upon electrostatic binding on these surfaces displays mirror-imaged bisignated circular dichroism and red-emitting circularly polarized luminescence signals with a high dissymmetry factor. Experimental and computational investigations establish that the chiroptical properties emerge from surface-bound asymmetric H-type dimers of acridine orange, further supported by fluorescence lifetime imaging studies. Specifically, atomistic molecular dynamics simulations show that the experimentally observed chiral signatures have their origin in van der Waals interactions between acridine orange dimers and the amphiphile head groups as well as in the extent of solvent exposure of the chromophore.

CO2-Responsive Rosin-Based Supramolecular Hydrogels: Diverse Chiral Nanostructures and Their Application in In Situ Synthesis of Chiral Gold Nanoparticles

Natural small molecules have demonstrated tremendous potential for the construction of supramolecular chiral nanostructures owing to their unique molecular structures and chirality. In this study, novel CO2-responsive supramolecular hydrogels were constructed using a series of rosin-based surfactants (CnMPAN, n = 10, 12, and 14). The macroscopic properties, rheological properties, nanostructures, and intermolecular interactions of the hydrogels were investigated using differential scanning calorimetry, rotational rheometry, cryogenic transmission electron microscopy, and Fourier transform infrared spectroscopy. Interestingly, diverse nanostructures containing helical nanofibers, interwoven nanofibers, and twisted nanoribbons were formed in the hydrogels, which were rarely observed in reported supramolecular hydrogels, and the strength of the hydrogels was significantly enhanced by increasing the CnMPAN concentration and the alkyl chain length. The obtained hydrogels exhibited excellent CO2-responsiveness, with no obvious variation in the nanostructures and rheological properties after response to CO2/N2 for five cycles. Taking advantage of the chiral nanostructures of hydrogels, gold nanoparticles (GNPs) were further prepared. The average particle sizes of the resulting GNPs were as low as 2.5 nm, and the GNPs also had a chiral structure. It is worth noting that no additional reductants and UV-light irradiation were used during the reduction process of GNPs. This study emphasizes that the unique molecular structure and chirality of rosin are critical for the preparation of hydrogels with chiral nanostructures. In addition, this study enriches the applications of forest resources.

Three-step cascaded artificial light-harvesting systems with tunable efficiency based on metallacycles

It is still challenging to develop multi-step cascaded artificial light-harvesting systems (ALHSs) with tunable efficiency. Here, we designed novel cascaded ALHSs with AIE-active metallacycles as the light-harvesting antenna, Eosin Y (ESY) and sulforhodamine 101 (SR101) as conveyors, near-infrared emissive chlorin-e6 (Ce6) as the final acceptor. The close contact and fair spectral overlap between donor and acceptor molecules at each level ensured the efficient sequential three-step energy transfer. The excited energy was sequentially and efficiently funneled to Ce6 along the cascaded line MTPEPt1 → ESY → SR101 → Ce6. Additionally, a unique strategy for regulating the efficiency of ALHS was illustrated by adjusting hydrophilic and hydrophobic interactions.

Using a molecular additive to control chiral supramolecular assembly and the subsequent chirality transfer process

Hierarchical assembly of chiral molecules is achieved through the introduction of molecular additives, which enables the chiral assembly of nanosheets into helical nanorods with inverted chirality. Moreover, the hierarchical assembly of chiral molecules in the presence of a molecular additive can lead to the subsequent chirality transfer from a molecular system to nanoparticle assemblies.

Macroscopic Helical Assembly of One-Dimensional Coordination Polymers: Helicity Inversion Triggered by Solvent Isomerism

Assembling macroscopic helices with controllable chirality and understanding their formation mechanism are highly desirable but challenging tasks for artificial systems, especially coordination polymers. Here, we utilize solvents as an effective tool to induce the formation of macroscopic helices of chiral coordination polymers (CPs) and manipulate their helical sense. We chose the Ni/R-,S-BrpempH2 system with a one-dimensional tubular structure, where R-,S-BrpempH2 stands for R-,S-(1-(4-bromophenyl)ethylaminomethylphosphonic acid). The morphology of the self-assemblies can be controlled by varying the cosolvent in water, resulting in the formation of twisted ribbons of R-,S-Ni(Brpemp)(H2O)·H2O (R-,S-2T) in pure H2O; needle-like crystals of R-,S-Ni(Brpemp)(H2O)2·1/3CH3CN (R-,S-1C) in 20 vol % CH3CN/H2O; nanofibers of R-,S-Ni(Brpemp)(H2O)·H2O (R-,S-3F) in 20-40 vol % methanol/H2O or ethanol/H2O; and superhelices of R-,S-Ni(Brpemp)(H2O)·H2O (R-,S-4H or 5H) in 40 vol % propanol/H2O. Interestingly, the helicity of the superhelix can be controlled by using a propanol isomer in water. For the Ni/R-BrpempH2 system, a left-handed superhelix of R-4H(M) was obtained in 40 vol % NPA/H2O, while a right-handed superhelix of R-5H(P) was isolated in 40 vol % IPA/H2O. These results were rationalized by theoretical calculations. Adsorption studies revealed the chiral recognition behavior of these compounds. This work may contribute to the development of chiral CPs with a macroscopic helical morphology and interesting functionalities.

Construction of an efficient artificial light-harvesting system based on hyperbranched polyethyleneimine and improvement of photocatalytic performance

An artificial light-harvesting system (ALHS) was developed in aqueous solution by employing the electrostatic co-assembly of a tetraphenylethylene derivative modified with two sulfonate groups (TPE-BSBO) and hyperbranched polyethyleneimine (PEI) as the energy donors, and 4,7-bis(2-thienyl)-2,1,3-benzothiadiazole (DBT) as the energy acceptors. The ALHS exhibits not only high efficiency in energy transfer and conversion but also a significant enhancement in the generation of reactive oxygen species (ROS), especially superoxide anion radicals (O2˙-), facilitating its utilization in photocatalytic oxidation reactions.

Host-Guest Complexes of Pillar[5]arene as Components for Supramolecular Light-Harvesting Systems with Tunable Fluorescence

A guest molecule containing a short alkyl spacer between the tetraphenylethylene group and the methylpyridinium group was designed and synthesized. After complexation with a water-soluble pillar[5]arene, the resulting host-guest complex can further self-assemble into fluorescence-emitting nanoparticles in water. By loading a commercially available dye Rhodamine 6G into the nanoparticles, an efficient artificial light-harvesting system with high donor/acceptor ratios (>400/1) was successfully constructed. The obtained systems show considerable antenna effects with values of more than 10 times. The system also exhibits tunable fluorescence emission behavior and can be used as a fluorescent ink for information encryption.

DNA-induced circularly polarized luminescence of helicene racemates

Enantiopure helicenes have been extensively investigated due to their outstanding chiroptical properties, while helicene racemates are considered as chiroptically silent. Here, we describe a facile method to produce circularly polarized luminescence (CPL) from helicene racemates via supramolecular association with DNA in aqueous solution. Racemic cationic helicene derivatives are immobilized in the grooves of commercially available double-stranded right-handed DNA, and the discrimination of left- and right-handed helicenes by chiral DNA is monitored by single molecule force spectroscopy. This subsequently leads to the generation of prominent CPL with dissymmetric factor |glum | of close to 0.01, which is approximate to enantiopure helicenes. The strategy developed in this work avoids the tedious and expensive chiral resolution process and provides a distinctive insight into the fabrication of CPL-emitting systems.

Cascade energy transfer boosted near-infrared circularly polarized luminescence of nanofibers from an exclusively achiral system

We constructed chiral supramolecular nanofibers for light harvesting based on symmetry-breaking, and these can generate near-infrared circularly polarized luminescence (CPL) with high dissymmetry factor (g_lum) through a synergistic energy transfer and chirality transfer process. Firstly, the achiral molecule BTABA was assembled into a symmetry-breaking assembly using a seeded vortex strategy. Subsequently, the chiral assembly can endow the two achiral acceptors, Nile Red (NR) and Cyanine 7 (CY7), with supramolecular chirality, as well as chiroptical properties. CY7 can reach an excited state and emit near-infrared light through a cascade energy transfer process from BTABA to NR and then to CY7, but cannot directly acquire energy from the excited BTABA. Significantly, the near-infrared CPL of CY7 can be obtained with a boosted g_lum value of 0.03. This work will provide a deep insight into the preparation of materials with near-infrared CPL activity from an exclusively achiral system.

Stepwise Solution-Interfacial Nanoarchitectonics for Assembled Film with Full-Color and White-Light Circularly Polarized Luminescence

The fabrication of chiral thin films with tunable circularly polarized luminescence (CPL) colors is important in developing chiroptical materials but remains challenging due to the lack of assembly-initiated chiral film formation methodology. Here, by adopting a combined solution aggregation and interfacial assembly strategy, we report the fabrication of chiral film materials with full-color and white-light CPL. A biquinoline glutamic acid ester (abbreviated as BQGE) shows a typical aggregation-induced emission property with blue CPL after solution aggregation. Subsequent interfacial assembly of these solution aggregates on a solid substrate leads to the formation of a CPL active film consisting of nanobelt structures. Since the BQGE molecule has a coordination site, the CPL emission of an individual BQGE film can be extended from blue to green emission upon coordination with a zinc ion, accompanied by morphology transition from nanobelts to nanofibers. Further extension to red-color CPL is successfully achieved by coassembly with an achiral acceptor dye. Interestingly, the proper combination of coordination ratio and acceptor loading ratio provides bright white-light CPL emission from the BQGE/Zn²⁺/PDA triad composite film. This work provides a new approach to fabricating chiroptical film materials with controlled microscopic morphology and tunable CPL properties.

Reversible Inversion of Circularly Polarized Luminescence in a Coassembly Supramolecular Structure with Achiral Sulforhodamine B Dyes

The dynamic control of circularly polarized luminescence (CPL) has far-reaching significance in optoelectronics, information storage, and data encryption. Herein, we reported the reversible inversion of CPL in a coassembly supramolecular system consisting of chiral molecules L4, which contain two positively charged viologen units, and achiral ionic surfactant sodium dodecyl sulfate (SDS) by introducing achiral sulforhodamine B (SRB) dye molecules. The chirality of CPL in the coassemblies can be efficiently regulated and inverted by simply adjusting the amount of SRB. A series of experimental characterization, including optical spectroscopy, electron microscope, ¹H NMR, and X-ray scattering measurements, suggested that SRB could coassemble with L4/SDS to establish a new stable L4/SDS/SRB supramolecular structure through electrostatic interactions. Moreover, the negative-sign CPL could revert to the positive-sign CPL if titanium dioxide (TiO₂) nanoparticles were used to decompose SRB molecules. The evolution of the CPL inversion process could be cycled at least 5 times without a significant decline in CPL signals when SRB was refueled to the system. Our results provide a facile approach to dynamically regulating the handedness of CPL in a multiple-component supramolecular system via achiral species.

Photo-triggered full-color circularly polarized luminescence based on photonic capsules for multilevel information encryption

Materials with phototunable full-color circularly polarized luminescence (CPL) have a large storage density, high-security level, and enormous prospects in the field of information encryption and decryption. In this work, device-friendly solid films with color tunability are prepared by constructing Förster resonance energy transfer (FRET) platforms with chiral donors and achiral molecular switches in liquid crystal photonic capsules (LCPCs). These LCPCs exhibit photoswitchable CPL from initial blue emission to RGB trichromatic signals under UV irradiation due to the synergistic effect of energy and chirality transfer and show strong time dependence because of the different FRET efficiencies at each time node. Based on these phototunable CPL and time response characteristics, the concept of multilevel data encryption by using LCPC films is demonstrated.

Self-assembled supramolecular artificial light-harvesting nanosystems: construction, modulation, and applications

Artificial light-harvesting systems, an elegant way to capture, transfer and utilize solar energy, have attracted great attention in recent years. As the primary step of natural photosynthesis, the principle of light-harvesting systems has been intensively investigated, which is further employed for artificial construction of such systems. Supramolecular self-assembly is one of the feasible methods for building artificial light-harvesting systems, which also offers an advantageous pathway for improving light-harvesting efficiency. Many artificial light-harvesting systems based on supramolecular self-assembly have been successfully constructed at the nanoscale with extremely high donor/acceptor ratios, energy transfer efficiency and the antenna effect, which manifests that self-assembled supramolecular nanosystems are indeed a viable way for constructing efficient light-harvesting systems. Non-covalent interactions of supramolecular self-assembly provide diverse approaches to improve the efficiency of artificial light-harvesting systems. In this review, we summarize the recent advances in artificial light-harvesting systems based on self-assembled supramolecular nanosystems. The construction, modulation, and applications of self-assembled supramolecular light-harvesting systems are presented, and the corresponding mechanisms, research prospects and challenges are also briefly highlighted and discussed.

Cascade energy transfer augmented circular polarization in photofluorochromic cholesteric texture

Circularly polarized luminescence (CPL)-active light-harvesting systems consisting of a light-responsive donor (R-1), mediator (Nile red), and terminal acceptor (Cyanine 5) are constructed in cholesteric liquid crystals. A dynamically tunable CPL dissymmetry factor and energy transfer modes, are achieved via the closed-ring and open-ring conversion between R-1-O and R-1-C.