Fiber‐in‐Tube Design of Co 9 S 8 ‐Carbon/Co 9 S 8 : Enabling Efficient Sodium Storage

Intercalating Organic Hybrid Cadmium Antimony Sulfide Nanoparticles into Graphene Oxide Nanosheets for Electrochemical Lithium Storage

Inorganic metal sulfides have received extensive investigation as anode materials in lithium-ion batteries (LIBs). However, applications of crystalline organic hybrid metal sulfides as anode materials in LIBs are quite rare. In addition, combining the nanoparticles of crystalline organic hybrid metal sulfides with conductive materials is expected to enhance the electrochemical lithium storage performance. Nevertheless, due to the difficulty of harvesting the nanoparticles of crystalline organic hybrid metal sulfides, this approach has never been tried to date. Herein, nanoparticles of a crystalline organic hybrid cadmium antimony sulfide (1,4-DABH2)Cd2Sb2S6 (DCAS) were prepared by a top-down method, including the procedures of solvothermal synthesis, ball milling, and ultrasonic pulverization. Thereafter, the nanoparticles of DCAS with sizes of ∼500 nm were intercalated into graphene oxide nanosheets through a freeze-drying treatment and a DCAS@GO composite was obtained. Compared with the reported Sb2S3- and CdS-based composites, the DCAS@GO composite exhibited superior electrochemical Li+ ion storage performance, including a high capacity of 1075.6 mAh g-1 at 100 mA g-1 and exceptional rate tolerances (646.8 mAh g-1 at 5000 mA g-1). In addition, DCAS@GO can provide a high capacity of 705.6 mAh g-1 after 500 cycles at 1000 mA g-1. Our research offers a viable approach for preparing the nanoparticles of crystalline organic hybrid metal sulfides and proves that intercalating organic hybrid metal sulfide nanoparticles into GO nanosheets can efficiently boost the electrochemical Li+ ion storage performance.

Construction of direct Z-scheme Co9S8/CdS with tubular heterostructure through the simultaneous immobilization and in-situ reduction strategy for enhanced photocatalytic Cr(VI) reduction under visible light

Tubular Co9S8/CdS heterostructures have been successfully synthesized by in-situ growing CdS onto Co9S8 nanotubes through a simultaneous immobilization and in-situ reduction strategy. It turned out that the so-obtained heterostructure with Co9S8/CdS molar ratio of 1/10 can display a broad light absorption edge and especially much enhanced capacity for photocatalytic reduction of Cr(VI) under visible light. The characterization analysis and experimental results suggested that an interfacial electrostatic field between Co9S8 and CdS elements in the heterostructure could be constructed due to their different Fermi levels, allowing for more quantities of highly reductive electrons to participate in the photocatalytic reaction. Therefore, the so-obtained Co9S8/CdS (1/10) heterostructures could achieve the photocatalytic reduction efficiency of 100% within 20 min, which was more than two and four times larger than that of pristine CdS and Co9S8, respectively. Moreover, the possible photocatalytic reaction mechanism for reducing Cr(VI) was investigated and found to follow the direct Z-scheme charge transfer pathway. This novel fabrication route for composite photocatalysts with tubular heterostructures could lead to the widespread implementations for the elimination of various harmful pollutants in the process of environmental governance.

Recent progress in electrode materials for micro-supercapacitors

Micro-supercapacitors (MSCs) stand out in the field of micro energy storage devices due to their high power density, long cycle life, and environmental friendliness. The key to improving the electrochemical performance of MSCs is the selection of appropriate electrode materials. To date, both the composition and structure of electrode materials in MSCs have become a hot research topic, and it is urgent to compose a review to highlight the most important research achievements, major challenges, opportunities, and encouraging perspectives in this field. In this review, research background of MSCs is first reviewed followed by their working principles, structural classifications, and physiochemical and electrochemical characterization techniques. Next, various materials and preparation methods are summarized, and the relationship between the MSC performance and structure and composition of materials are discussed in depth. Finally, this review provides a comprehensive suggestion on accelerating the development of electrode materials to facilitate the commercialization of MSCs.

Hierarchical Flower-like Sulfides with Increased Entropy for Electromagnetic Wave Absorption

The concept of high entropy is considered promising to enhance electromagnetic wave absorption properties. However, preparing high-entropy sulfides with unique structures for high-performance electromagnetic absorption remains a challenge. In this study, hierarchical porous flower-like dual-phase sulfides were designed with increased entropy and fabricated using a versatile approach. The porous flower configuration enhanced the scattering of electromagnetic waves and the impedance-matching characteristics. Additionally, the effect of high entropy induced diverse defects that were favorable for electromagnetic wave dissipation in dual-phase sulfides. The design of the dual-phase structure generated strong interface polarization, and the composition and content of the phases exhibited clear changes with the increase in the number of metal elements. Interestingly, apparent lattice distortions, defects, and shear strains were directly observed near the dual-phase interface of millerite (102) and pyrite (220) planes, facilitating the occurrence of dipole polarization. Consequently, the developed dual-phase high-entropy sulfide exhibited outstanding microwave absorption properties. The minimum reflection loss value of (FeCoNiCuZn)S was -45.8 dB at a thickness of 1.5 mm, and the optimal effective absorption bandwidth was 3.8 GHz at a thickness of 1.4 mm thickness. Thus, the design of high-entropy sulfides brings meaningful guidance for tuning the wave absorption properties in sulfides.

Spongelike Bimetallic Selenides Derived from Prussian Blue Analogue on Layered Ni(II)-Based MOF for High-Efficiency Supercapacitors

Recently, employing metal-organic frameworks (MOFs) as precursors to prepare various metal oxides, sulfides, and selenides has drawn enormous attention in the field of energy storage. In this paper, the nanosheets of an organophosphate-based Ni-MOF were successfully synthesized and employed as the template to prepare the Prussian blue analogue (PBA) nanoslices and nanoparticles on the nanosheet (PBA/Ni-MOF-NS-x h, x h stands for the reaction time.) by an in situ etching method. After selenization by the solvothermal method, the PBA nanoslices and nanoparticles were transformed into spongelike bimetallic selenides (labeled as PBA/Ni-MOF-NS-x h-Se) decorated with some nanoparticles. All of the characterization results including PXRD, SEM, TEM, EDS, XPS, and BET demonstrated the successful transformation. Impressively, the as-synthesized PBA/Ni-MOF-NS-12 h-Se exhibited a high specific capacitance of 1897.90 F g-1 at a current density of 1 A g-1 and a superior capacitance retention rate of 73.32% as the current density increased to 20 A g-1. In addition, the asymmetric supercapacitor device, PBA/Ni-MOF-NS-12 h-Se//AC, delivered a high energy density of 30.69 W h kg-1 at 0.85 kW kg-1 and extraordinary cycling stability with an 83.00% capacitance retention rate over 5000 cycles.

Prussian blue analogue-derived hollow metal oxide heterostructure for high-performance supercapacitors

Supercapacitors (SCs) have been the subject of considerable interest because of their distinct advantages. The performance of SCs is directly affected by the electrode materials. Metal oxides derived from Prussian blue analogues (PBAs) are often used as electrode materials for SCs. Herein, we developed a multi-step strategy to fabricate ternary hollow metal oxide (CuO/NiO/Co3O4) heterostructures. The core-shell structured PBA (NiHCC@CuHCC) with Ni-based PBA (NiHCC) as the core and Cu-based PBA (CuHCC) as the shell was prepared by a crystal seed method. The ternary metal oxide (CuO/NiO/Co3O4) with a hollow structure was obtained by calcinating NiHCC@CuHCC. The prepared CuO/NiO/Co3O4 demonstrates an excellent specific capacitance of 262.5 F g-1 at 1 A g-1, which is 27.4% and 16.2% higher than those of CuO/Co3O4 and NiO/Co3O4, respectively. In addition, the material showed outstanding cycling stability with a capacitance retention of 107.9% after 3000 cycles. The two-electrode system constructed with CuO/NiO/Co3O4 and nitrogen-doped graphene hydrogel (NDGH) demonstrates a stable and high energy density of 27.1 W h kg-1 at a power density of 1037.5 W kg-1. The capacitance retention rate was 100.7% after 4000 cycles. The reason for the excellent electrochemical properties could be the synergistic effect of the introduced heterojunction of CuO/NiO, the hollow structure, and various metal oxides. This strategy can greatly inspire the construction of SC electrodes.

Induced Bimetallic Sulfide Growth with Reduced Graphene Oxide for High-Performance Sodium Storage

Metal sulfide has been considered an ideal sodium-ion battery (SIB) anode material based on its high theoretical capacity. Nevertheless, the inevitable volume expansion during charge-discharge processes can lead to unsatisfying electrochemical properties, which limits its further large-scale application. In this contribution, laminated reduced graphene oxide (rGO) successfully induced the growth of SnCoS₄ particles and self-assembled into a nanosheet-structured SnCoS₄@rGO composite through a facile solvothermal procedure. The optimized material can provide abundant active sites and facilitate Na⁺ ion diffusion due to the synergistic interaction between bimetallic sulfides and rGO. As the anode of SIBs, this material maintains a high capacity of 696.05 mAh g^-1 at 100 mA g^-1 after 100 cycles and a high-rate capability of 427.98 mAh g^-1 even at a high current density of 10 A g^-1. Our rational design offers valuable inspiration for high-performance SIB anode materials.

Confined WS2 Nanosheets Tubular Nanohybrid as High-Kinetic and Durable Anode for Sodium-Based Dual Ion Batteries

Sodium based dual-ion battery (SDIB) has been regarded as one of the promising batteries technologies thanks to its high working voltage and natural abundance of sodium source, its practical application yet faces critical issues of low capacity and sluggish kinetics of intercalation-type graphite anode. Here, a tubular nanohybrid composed of building blocks of carbon-film wrapped WS₂ nanosheets on carbon nanotube (WS₂ /C@CNTs) was reported. The expanded (002) interlayer and dual-carbon confined structure endowed WS₂ nanosheets with fast charge transportation and excellent structural stability, and thus WS₂ /C@CNTs showed highly attractive electrochemical properties for Na⁺ storage with high reversible capacity, fast kinetic, and robust durability. The full sodium-based dual ion batteries by coupling WS₂ /C@CNTs anode with graphite cathode full cell presented a high reversible capacity (210 mAh g^-1 at 0.1 A g^-1 ), and excellent rate performance with a high capacity of 137 mAh g^-1 at 5.0 A g^-1 .

In Situ Fabrication of Porous Cox P Hierarchical Nanostructures on Carbon Fiber Cloth with Exceptional Performance for Sodium Storage

Superior high-rate performance and ultralong cycling life have been constantly pursued for rechargeable sodium-ion batteries (SIBs). In this work, a facile strategy is employed to successfully synthesize porous Co_x P hierarchical nanostructures supported on a flexible carbon fiber cloth (Co_x P@CFC), constructing a robust architecture of ordered nanoarrays. Via such a unique design, porous and bare structures can thoroughly expose the electroactive surfaces to the electrolyte, which is favorable for ultrafast sodium-ion storage. In addition, the CFC provides an interconnected 3D conductive network to ensure firm electrical connection of the electrode materials. Besides the inherent flexibility of the CFC, the integration of the hierarchical structures of Co_x P with the CFC, as well as the strong synergistic effect between them, effectively help to buffer the mechanical stress caused by repeated sodiation/desodiation, thereby guaranteeing the structural integrity of the overall electrode. Consequently, Co_x P@CFC as an anode shows a record-high capacity of 279 mAh g^-1 at 5.0 A g^-1 with almost no capacity attenuation after 9000 cycles.

Metal-organic framework-derived nitrogen-doped carbon-confined CoSe2 anchored on multiwalled carbon nanotube networks as an anode for high-rate sodium-ion batteries

Metal selenides, as potential alternative candidates for sodium storage, have promising applicability due to their high theoretical specific capacity. However, their huge volume change and sluggish electrode kinetics during sodium ion uptake and release processes can result in insufficient cycling life and inferior rate performance, hindering their practical application. Herein, nitrogen (N)-doped carbon-confined cobalt selenide anchored on multiwalled carbon nanotube networks (denoted as CoSe₂@NC/MWCNTs) was designed and successfully built through a selenization process with ZIF-67 MOF as the template. The existence of the interconnected MWCNT network plays a crucial role in not only enhancing the electronic conductivity and ion/electron-transfer efficiency but also ensuring structural stability. Consequently, the optimized CoSe₂@NC/MWCNTs composite delivers a high reversible capacity of 479.6 mA h g^-1 at a current rate of 0.2 A g^-1, accompanied by a 92.0% capacity retention over 100 cycles and a predominant rate performance of 227.4 mA h g^-1 even under 20 A g^-1 when examined as the anode in Na-ion batteries. Moreover, the kinetic behaviors were confirmed using CV profiles at various rates, as well as the galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS). Besides, the HRTEM images clearly reveal the sodium-ion storage mechanism of the CoSe₂ hybrid. These results make CoSe₂@NC/MWCNTs a prospective anode material in advanced sodium-ion batteries.

A dual-control strategy based on electrode material and electrolyte optimization to construct an asymmetric supercapacitor with high energy density

Metal-organic frames (MOFs) are regarded as excellent candidates for supercapacitors that have attracted much attention because of their diversity, adjustability and porosity. However, both poor structural stability in aqueous alkaline electrolytes and the low electrical conductivity of MOF materials constrain their practical implementation in supercapacitors. In this study, bimetallic CoNi-MOF were synthesized to enhance the electrical conductivity and electrochemical activity of nickel-based MOF, as well as the electrochemical performance of the CoNi-MOF in multiple alkaline electrolytes was investigated. The CoNi-MOF/active carbon device, as-fabricated with a 1 M KOH electrolyte, possesses a high energy density of 35 W h kg^-1with a power density of 1450 W kg^-1, exhibiting outstanding cycling stability of 95% over 10,000 cycles. The design of MOF-based electrode materials and the optimization selection of electrolytes pave the way for constructing high-performance supercapacitors.

Carbon-coated MoS1.5Te0.5 nanocables for efficient sodium-ion storage in non-aqueous dual-ion batteries

Sodium-based dual-ion batteries have received increased attention owing to their appealing cell voltage (i.e., >3 V) and cost-effective features. However, the development of high-performance anode materials is one of the key elements for exploiting this electrochemical energy storage system at practical levels. Here, we report a source-template synthetic strategy for fabricating a variety of nanowire-in-nanotube MS_xTe_y@C (M = Mo, W, Re) structures with an in situ-grown carbon film coating, termed as nanocables. Among the various materials prepared, the MoS_1.5Te_0.5@C nanocables are investigated as negative electrode active material in combination with expanded graphite at the positive electrode and NaPF₆-based non-aqueous electrolyte solutions for dual-ion storage in coin cell configuration. As a result, the dual-ion lab-scale cells demonstrate a prolonged cycling lifespan with 97% capacity retention over 1500 cycles and a reversible capacity of about 101 mAh g⁻¹ at specific capacities (based on the mass of the anode) of 1.0 A g⁻¹ and 5.0 A g⁻¹, respectively.

Sodium-based dual-ion batteries are promising electrochemical energy storage devices. Here, the authors report a source-template synthetic strategy to prepare carbon-coated MoS_1.5Te_0.5 nanocables and their use as anode active materials in Na-based dual ion cells.

Femtosecond ultrafast pulse generation with high-quality 2H-TaS2 nanosheets via top-down empirical approach

Tantalum disulfide (TaS₂), an emerging group VB transition metal dichalcogenide, with unique layered structure, rich phase diagrams, metallic behavior, higher carrier concentration and mobility is emerging as a prototype for revealing basic physical phenomena and developing practical applications. However, its photonics properties and even engineering-related processes are still rare. Here, the top-down experiment demonstration, including synthesis, thickness optimization and nonlinear optical application, has been reported. In addition, the ultrafast (∼373 fs) erbium-doped fiber pulse with a small time-bandwidth product (∼0.34) and long-term stability (∼25 days) was realized using the nonlinear absorption properties of the high-quality 2H-TaS₂ nanosheet. These results suggest an experimental route for further ultrafast photonics exploration based on metallic transition metal dichalcogenides.

One-dimensional core-shell motif nanowires with chemically-bonded transition metal sulfide-carbon heterostructures for efficient sodium-ion storage

Herein, a chemical-vapor deposition-like strategy was developed for the synthesis of versatile core–shell transition metal sulfide (TMS)@carbon nanowires with chemically-bonded heterostructures and significantly improved electrochemical performance. The morphological evolution observations revealed the simultaneous growth of TMS nanowires and their bonding with an ultrathin carbon layer. The resulting core–shell heterostructured nanowires possessed notable advantages, including fast ion/electron diffusion rates, improved conductivity, and chemical/mechanical stability, thereby leading to remarkable reversible capacity, rate capability, and cycling stability for Na-ion storage applications. The in situ transmission electron microscopy and in situ X-ray diffraction studies for FeS@C demonstrated the crystalline phase evolution between hexagonal and tetragonal FeS species during the electrochemical charging/discharging process, clearly indicating the excellent Na-ion storage performance of FeS@C nanowires. This work provides a new methodology for achieving 1D core–shell nanoarchitectures, while elucidating the electrochemical reaction mechanism underlying Na-ion storage in TMS materials.

A chemical-vapor deposition-like strategy was developed for the synthesis of versatile core–shell transition metal sulfide (TMS)@carbon heterostructured nanowires for electrochemical sodium ion storage.

Ultrahigh Rate Capability and Lifespan MnCo2 O4 /Ni-MOF Electrode for High Performance Battery-Type Supercapacitor

MnCo₂ O₄ is derived from a Co/Mn bimetallic metal-organic framework (MOF). Then Ni-MOF is directly grown on the surface of the obtained MnCo₂ O₄ to form a nano-flower structure with small balls. A large surface area, abundant active sites of MnCo₂ O₄ and porosity of Ni-MOF allow the prepared MnCo₂ O₄ /Ni-MOF composite material to deliver an excellent electrochemical performance. At the same time, an appropriate thermal treatment temperature of the MnCo₂ O₄ precursor is also very important for controlling the morphology of the obtained MnCo₂ O₄ and electrochemical performances of the resulted composite material including electric conductivity, specific capacitance and rate performance. The prepared MnCo₂ O₄ -600/Ni-MOF shows an ultrahigh rate performance (when the current density increases from 1 to 10 A g^-1 , the capacitance retention rate is as high as 93.41 %) and good cycle stability (the assembled asymmetric supercapacitor advice delivers a capacitance retention rate of 94.74 % after 20 000 charge and discharge cycles) as well as a relatively high specific capacitance. These excellent electrochemical properties indicate that MnCo₂ O₄ /Ni-MOF has a good application prospect in the market.

Construction of 1T@2H MoS2 heterostructures in situ from natural molybdenite with enhanced electrochemical performance for lithium-ion batteries

Natural molybdenite, an inexpensive and naturally abundant material, can be directly used as an anode material for lithium-ion batteries. However, how to release the intrinsic capacity of natural molybdenite to achieve high rate performance and high capacity is still a challenge. Herein, we introduce an innovative, effective, and one-step approach to preparing a type of heterostructure material containing 1T@2H MoS2 crafted from insertion and expansion of natural molybdenite. The metallic 1T phase formed in situ can significantly improve the electronic conductivity of MoS2. At the same time, 1T@2H MoS2 heterostructures can provide an internal electric field (E-field) to accelerate the migration rate of electrons and ions, promote the charge transfer behaviour, and ensure the reaction reversibility and lithium storage kinetics. Such worm-like 1T@2H MoS2 heterostructures also have a large specific surface area and a large number of defects, which will help shorten the lithium-ion transmission distance and provide more ion transmission channels. As a result, it exhibits a discharge capacity of 788 mA h g-1 remarkably at 100 mA g-1 after 485 cycles and stable cycling performance. It also shows excellent magnification performance of 727 mA h g-1 at 1 A g-1, compared to molybdenite concentrate. Briefly, this work's heterostructure architectures open up a new avenue for applying natural molybdenite in lithium-ion batteries, which has the potential to achieve large-scale commercial applications.

Robust Pseudocapacitive Sodium Cation Intercalation Induced by Cobalt Vacancies at Atomically Thin Co1-x Se2 /Graphene Heterostructure for Sodium-Ion Batteries

Electronic structure engineering on electrode materials could bring in a new mechanism to achieve high energy and high power densities in sodium ion batteries. Herein, we design and create Co vacancies at the interface of atomically thin CoSe₂ /graphene heterostructure and obtain Co_1-x Se₂ /graphene heterostructure electrode materials that facilitate significant Na⁺ intercalation pseudocapacitance. Density functional theory (DFT) calculation suggests that the Na⁺ adsorption energy is dramatically increased, and the Na⁺ diffusion barrier is remarkably reduced due to the introduction of Co vacancy. The optimized electrode delivers a superior capacity of 673.6 mAh g^-1 at 0.1 C, excellent rate capability of 576.5 mAh g^-1 at 2.0 C and ultra-long life up to 2000 cycles. Kinetics analysis indicates that the enhanced Na⁺ storage is mainly attributed to the intercalation pseudocapacitance induced by Co vacancies. This work suggests that the creation of cation vacancy could bestow heterostructured electrode materials with pseudocapacitive Na⁺ intercalation for high-capacity and high-rate energy storage.

Hierarchically Porous WO3/CdWO4 Fiber-in-Tube Nanostructures Featuring Readily Accessible Active Sites and Enhanced Photocatalytic Effectiveness for Antibiotic Degradation in Water

The intentional design and construction of photocatalysts containing heterojunctions with readily accessible active sites will improve their ability to degrade pollutants. Herein, hierarchically porous WO₃/CdWO₄ fiber-in-tube nanostructures with three accessible surfaces (surface of core fiber and inner and outer surfaces of the porous tube shell) were fabricated by an electrospinning method. This WO₃/CdWO₄ heterostructure, assembled by interconnected nanoparticles, displays good photocatalytic degradation of ciprofloxacin (CIP, 93.4%) and tetracycline (TC, 81.6%) after 90 min of simulated sunlight irradiation, much higher than the pristine WO₃ (<75.3% for CIP and <53.6% for TC) or CdWO₄ materials (<58.9% for CIP and <39.5% for TC). The WO₃/CdWO₄ fiber-in-tube promotes the separation of photoinduced electrons and holes and also provides readily accessible reaction sites for photocatalytic degradation. The dominant active species determined by trapping active species and electron paramagnetic resonance were hydroxyl radicals followed by photogenerated holes and superoxide anions. The WO₃/CdWO₄ materials formed a Z-scheme heterojunction that generated superoxide anion and hydroxyl radicals, leading to degradation of antibiotics (CIP and TC) via photocatalysis in aqueous solution.

Novel Fenton process of Co-catalyst Co9S8 quantum dots for highly efficient removal of organic pollutants

Advanced oxidation processes (AOPs) have been widely accepted as an efficient and promising strategy for treating organic pollutants, is mainly dominated by hydroxyl radicals (•OH); however, its further practical application has been hindered by its low decomposition rate of H₂O₂. Hence, for the first time, we propose an eco-friendly and facile synthesis methodology synthesize water-soluble Co₉S₈ quantum dots (QDs) derived from commercial cobalt disulfide (CoS₂), which can serve as excellent co-catalysts to dramatically enhance the decomposition rate of H₂O₂. It is demonstrated that the conversion rate of H₂O₂ into •OH is ca. 80.02% promoted by Co₉S₈ QDs, whereas the conventional Fenton process is ca. 34.9%. The result shows that unsaturated edged S atoms on the surface of Co₉S₈ play a pivotal role in this enhancement, where the number of protons will react with sulfur atoms to form H₂S and expose reductive metallic active sites to accelerate the Fe³⁺/Fe²⁺ conversion. In addition, to tackle the issue for difficult recovery of liquid quantum dots, the magnetic Co₉S₈ QDs/Fe₃O₄ nanoparticles are particularly synthesized, which show excellent performance for degradation of 20 mg/L Rhodamine B (RhB). Moreover, the TOC degradation rate can remain stable at 80% even after five cycles. It is expected that this work will provide a new pathway of thinking in the Fenton process and impulse the usage of liquid quantum dots in practical AOPs application.

Self-templated formation of (NiCo)9S8 yolk-shelled spheres for high-performance hybrid supercapacitors

Rational materials design for the synthesis of desirable hollow micro- and nanostructures has recently revealed the remarkable potential for high-performance energy storage and conversion devices. Owing to their unique "core-void-shell" structural configurations, yolk-shell-structured electrode materials can achieve intimate contact with the electrolyte and alleviate the volume expansion issue during electrochemical cycling, which is therefore poised to further boost the electrochemical properties of hybrid supercapacitors. Herein, a facile self-templated strategy, consisting of a hydrothermal step and a high-temperature sulfurization process, has been developed for the construction of yolk-shell (NiCo)9S8 spheres in situ coated by graphite carbon ((NiCo)9S8/GC) due to the non-equilibrium thermal treatment of alkali metal alkoxides. The as-synthesized yolk-shelled sphere exhibits a high specific capacitance of 1434.4 F g-1 (179.3 mA h g-1) at a current density of 1 A g-1, and good rate capability and cycling stability with 83.1% capacitance retention at 8 A g-1 over 5000 cycles. To further demonstrate its practical application, a hybrid supercapacitor device was assembled using (NiCo)9S8/GC as the battery-type positive electrode and activated carbon (AC) as the capacitive-type electrode. The as-fabricated device can reach a wide voltage window of up to 1.6 V, deliver a high energy density of 55.6 W h kg-1 at a power density of 800.3 W kg-1 and maintain 90.2% of specific capacitance after 3000 cycles.

Confinement Catalyst of Co9S8@N-Doped Carbon Derived from Intercalated Co(OH)2 Precursor and Enhanced Electrocatalytic Oxygen Reduction Performance

Oxygen reduction reaction (ORR) is an important cathode reaction in fuel cells and metal-air batteries. Composites of transition-metal sulfides (TMSs) and nitrogen-doped carbon (NC) are promising alternative ORR catalysts because of their high catalytic activity. However, the agglomeration of TMS particles limits practical applications. Here, a confinement catalyst composed of Co₉S₈@NC with a flower-like morphology was derived from metanilic intercalated Co(OH)₂ through interlayer-confined carbonation accompanied with host-layer sulfidation. The surface of the Co₉S₈ particles is covered with a few layers of nitrogen-doped graphene, which can prevent the Co₉S₈ particles from agglomeration and also produce catalytic activity affected by internal Co₉S₈. Thus, the Co₉S₈@NC material achieves excellent ORR performance with a half-wave potential of 0.861 V_RHE. In addition, an oxide layer on the surface of Co₉S₈@NC is fabricated shortly after the ORR starts. Further tests and density functional theory calculations indicated that this cobalt oxide layer can increase the electrochemically active area of Co₉S₈@NC as well as reduce the ORR energy barrier, thereby providing more catalytic active sites and enhancing the intrinsic catalytic activity, thus achieving a self-activation effect during the electrochemical reaction process.

Preparation of CTCNFs/Co9S8 hybrid nanofibers with enhanced microwave absorption performance

A three-step synthesis strategy has been applied to the preparation of Co₉S₈-loaded tubular carbon nanofibers (CTCNFs/Co₉S₈ hybrid nanofibers) with excellent microwave absorbing ability. Firstly, tubular polymer nanofibers (TPNFs) are synthesized using the confined self-condensation method that we developed. Afterwards, TPNFs are converted into surface carboxylated tubular carbon nanofibers (CTCNFs) by carbonization and subsequent acidification processes. Finally, a hydrothermal method is used for the controllable growth of Co₉S₈ nanoparticles on CTCNFs, and a series of CTCNFs/Co₉S₈ hybrid nanofibers with different Co₉S₈ loading are obtained. The prepared CTCNFs/Co₉S₈ hybrid nanofibers possess abundant effective interface and defect dipoles, which will lead to stronger polarization. Using the strategy of enhancing dielectric loss, the microwave dissipation ability of CTCNFs/Co₉S₈ hybrid nanofibers has been significantly improved, showing an excellent low-frequency absorbing performance with a minimum reflection loss of -46.81 dB@5.3 GHz. In addition, the composition, structure and properties of nanofibers have been systematically characterized. The Co₉S₈ loading on CTCNFs and the filler content of CTCNFs/Co₉S₈ hybrid nanofibers in matrix are studied and optimized. The microwave attenuation mechanism is also explained.

Bimetal Synergistic Effect Induced High Reversibility of Conversion-Type Ni@NiCo2S4 as a Free-Standing Anode for Sodium Ion Batteries

Conversion-type anode materials for sodium ion batteries have received extensive attention because of their relatively high theoretical capacity. However, multiple challenging obstacles stand in the way of their commercial application, especially their poor cycling stability resulting from the bad reversibility of the conversion reaction. Herein, Ni-Co bimetal sulfide was selected and investigated with the goal of improving the reversibility of the conversion reaction owing to the similarity of Ni and Co. As expected, when three-dimensional hierarchical Ni@NiCo₂S₄ (NiCo₂S₄ nanowires growing on the Ni foam) was applied as the free-standing anode for sodium ion batteries, it demonstrated high capacity and excellent cycling stability (90.65%, 100 cycles) compared with those of monometallic sulfides. Various characterization [in situ X-ray diffraction (XRD), ex situ XRD, ex situ X-ray photoelectron spectroscopy, FESEM mapping, and high-resolution transmission electron microscopy] tests confirmed that the Ni-Co alloy was formed during the discharge process and effectively prevented the crystalline grain growth of conversion reaction products, improving the reaction kinetics and reversibility.

Optimizing the Void Size of Yolk-Shell Bi@Void@C Nanospheres for High-Power-Density Sodium-Ion Batteries

Bismuth (Bi) has been demonstrated as a promising anode for Na-ion batteries (NIBs) because it has high gravimetry (386 mA h g^-1) and volumetric capacity (3800 mA h cm^-3). However, Bi suffers from large volume expansion during sodiation, leading to poor electrochemical performance. The construction of a nanostructure with sufficient void space to accommodate the volume change has been proven effective for achieving prolonged cycling stability. However the excessive void space will definitely decrease the volumetric energy density of the battery. Herein, we design optimized Bi@Void@C nanospheres (Bi@Void@C-2) with yolk-shell structure that exhibit the best cycling performance and enhanced volumetric energy density. The optimized void space not only could buffer the volume change of the Bi nanosphere but also could keep the high volumetric energy density of the battery. The Bi@Void@C-2 shows an excellent rate capacity of 173 mA h g^-1 at ultrahigh current density of 100 A g^-1 and long-cycle life (198 mA h g^-1 at 20 A g^-1 over 10 000 cycles). The origin of the superior performance is achieved through in-depth fundamental studies during battery operation using in situ X-ray diffraction (XRD) and in situ transmission electron microscope (TEM), complemented by theoretical calculations and ex situ TEM observation. Our rational design provides insights for anode materials with large volume variation, especially for conversion type and alloying type mechanism materials for batteries (i.e., Li-ion batteries, Na-ion batteries).

Co/Ni-MOF-74-derived CoNi2S4 nanoparticles embedded in porous carbon as a high performance anode material for sodium ion batteries

In this study, Co/Ni-MOF-74-derived CoNi₂S₄ nanoparticles embedded in porous carbon (CoNi₂S₄@C) were successfully prepared using Co/Ni-MOF-74 as precursor. And, CoNi₂S₄@C exhibits excellent electrochemical performance as an anode material for sodium ion batteries.

Redox Tuning in Crystalline and Electronic Structure of Bimetal-Organic Frameworks Derived Cobalt/Nickel Boride/Sulfide for Boosted Faradaic Capacitance

The development of efficient electrode materials is a cutting-edge approach for high-performance energy storage devices. Herein, an effective chemical redox approach is reported for tuning the crystalline and electronic structures of bimetallic cobalt/nickel-organic frameworks (Co-Ni MOFs) to boost faradaic redox reaction for high energy density. The as-obtained cobalt/nickel boride/sulfide exhibits a high specific capacitance (1281 F g^-1 at 1 A g^-1 ), remarkable rate performance (802.9 F g^-1 at 20 A g^-1 ), and outstanding cycling stability (92.1% retention after 10 000 cycles). An energy storage device fabricated with a cobalt/nickel boride/sulfide electrode exhibits a high energy density of 50.0 Wh kg^-1 at a power density of 857.7 W kg^-1 , and capacity retention of 87.7% (up to 5000 cycles at 12 A g^-1 ). Such an effective redox approach realizes the systematic electronic tuning that activates the fast faradaic reactions of the metal species in cobalt/nickel boride/sulfide which may shed substantial light on inspiring MOFs and their derivatives for energy storage devices.

1D Carbon-Based Nanocomposites for Electrochemical Energy Storage

Electrochemical energy storage (EES) devices have attracted immense research interests as an effective technology for utilizing renewable energy. 1D carbon-based nanostructures are recognized as highly promising materials for EES application, combining the advantages of functional 1D nanostructures and carbon nanomaterials. Here, the recent advances of 1D carbon-based nanomaterials for electrochemical storage devices are considered. First, the different categories of 1D carbon-based nanocomposites, namely, 1D carbon-embedded, carbon-coated, carbon-encapsulated, and carbon-supported nanostructures, and the different synthesis methods are described. Next, the practical applications and optimization effects in electrochemical energy storage devices including Li-ion batteries, Na-ion batteries, Li-S batteries, and supercapacitors are presented. After that, the advanced in situ detection techniques that can be used to investigate the fundamental mechanisms and predict optimization of 1D carbon-based nanocomposites are discussed. Finally, an outlook for the development trend of 1D carbon-based nanocomposites for EES is provided.

In Situ Formation of Co9S8 Nanoclusters in Sulfur-Doped Carbon Foam as a Sustainable and High-Rate Sodium-Ion Anode

Transition-metal sulfides hold great promise as anode materials for sodium-ion batteries due to the high theoretical capacity and excellent redox reversibility based on multielectron conversion reactions. In this work, an elaborate composite, cobalt sulfide nanoclusters embedded in honeycomb-like sulfur-doped carbon foam (Co₉S₈@S-CF), is prepared via a facile sulfur-assisting calcination strategy, which tactfully induces the co-occurrence of in situ pore-forming, sulfidation, sulfur doping, and carbonization. Notably, sulfur-doped carbon foam (S-CF) possesses abundant voids, which are subject to construction of three-dimensional ionic/electronic pathways, leading to high sodium-ion accessibility and ultrafast sodium-ion/electron transportation toward Co₉S₈ nanoclusters. When worked as an anode in sodium-ion batteries, it delivers a remarkable capacity of 373 mA h g^-1 over 1000 cycles at 0.25 C, achieving superior capacity retention of 80%. Furthermore, this anode could achieve unprecedented rate capability with a reversible capacity of 180 mA h g^-1 at 50 C (20 A g^-1), which significantly precedes those reported previously.