The Structure of the Elusive Urease–Urea Complex Unveils the Mechanism of a Paradigmatic Nickel‐Dependent Enzyme

Synergistic inhibition of ureolytic activity and growth of Klebsiella pneumoniae in vitro suggests cobinding of fluoride and acetohydroxamic acid at the urease active site and provides a novel strategy to combat ureolytic bacteria

The ability of ureolytic bacteria to break down stable urea to alkaline ammonia leads to several environmental and health challenges. Ureolytic bacteria such as Helicobacter pylori, Klebsiella pneumoniae, and Proteus mirabilis can become pathogenic and cause persistent infections that can be difficult to treat. Inhibiting urease activity can reduce the growth and pathogenicity of ureolytic bacteria. In the present in vitro study, we investigated the synergistic effects of tannic acid (TA) and the urease inhibitors fluoride (F-) and acetohydroxamic acid (AHA). The concentration of AHA needed for efficient inhibition of the ureolytic activity of K. pneumoniae can be significantly reduced if AHA is coapplied with tannic acid and sodium fluoride (NaF). Thus, only 1.20 μmol l-1 AHA in combination with 0.30 mmol l-1 tannic acid and 0.60 mmol l-1 NaF delayed the onset of ureolytic pH increase by 95.8 % and increased the growth lag phase by 124.3 % relative to untreated K. pneumoniae. At these concentrations, without AHA, TA and NaF increased the onset of the ureolytic pH change by only 37.0 % and the growth lag phase by 52.5 %. The strong inhibition obtained with low concentrations of AHA in triple-compound treatments suggests cobinding of F- and AHA at the urease active site and could reduce the side effects of AHA when it is employed as a drug against e.g. urinary tract infections (UTIs) and blocked catheters. This study reports the basis for a promising novel therapeutic strategy to combat infections caused by ureolytic bacteria and the formation of urinary tract stones and crystalline biofilms on catheters.

Effect of biopolymer chitosan on manganese immobilization improvement by microbial‑induced carbonate precipitation

Microbially induced carbonate precipitation (MICP), as an eco-friendly and promising technology that can transform free metal ions into stable precipitation, has been extensively used in remediation of heavy metal contamination. However, its depressed efficiency of heavy metal elimination remains in question due to the inhibition effect of heavy metal toxicity on bacterial activity. In this work, an efficient, low-cost manganese (Mn) elimination strategy by coupling MICP with chitosan biopolymer as an additive with reduced treatment time was suggested, optimized, and implemented. The influences of chitosan at different concentrations (0.01, 0.05, 0.10, 0.15 and 0.30 %, w/v) on bacterial growth, enzyme activity, Mn removal efficiency and microstructure properties of the resulting precipitation were investigated. Results showed that Mn content was reduced by 94.5 % within 12 h with 0.15 % chitosan addition through adsorption and biomineralization as MnCO3 (at an initial Mn concentration of 3 mM), demonstrating a two-thirds decrease in remediation time compared to the chitosan-absent system, whereas maximum urease activity increased by ∼50 %. Microstructure analyses indicated that the mineralized precipitates were spherical-shaped MnCO3, and a smaller size and more uniform distribution of MnCO3 is obtained by the regulation of abundant amino and hydroxyl groups in chitosan. These results demonstrate that chitosan accelerates nucleation and tunes the growth of MnCO3 by providing nucleation sites for mineral formation and alleviating the toxicity of metal ions, which has the potential to upgrade MICP process in a sustainable and effective manner. This work provides a reference for further understanding of the biomineralization regulation mechanism, and gives a new perspective into the application of biopolymer-intensified strategies of MICP technology in heavy metal contamination.

Analysis of latrine fecal odor release pattern and the deodorization with composited microbial agent

As an important source of malodor, the odor gases emitted from public toilet significantly interfered the air quality of living surroundings, resulting in environmental problem which received little attention before. Thus, this paper explored the odor release pattern of latrine feces and deodorization effect with composited microbial agent in Chengdu, China. The odor release rules were investigated in sealed installations with a working volume of 9 L for 20 days. The odor units (OU), ammonia (NH3), hydrogen sulfide (H2S) and total volatile organic compounds (TVOC) were selected to assess the release of malodorous gases under different temperature and humidity, while the highest malodor release was observed under 45℃, with OU and TVOC concentration was 643.91 ± 2.49 and 7767.33 ± 33.50 mg/m3, respectively. Microbes with deodorization ability were screened and mixed into an agent, which composited of Bacillus amyloliquefaciens, Lactobacillus plantarum, Enterococcus faecalis and Pichia fermentans. The addition of microbial deodorant could significantly suppress the release of malodor gas during a 20-day trial, and the removal efficiency of NH3, H2S, TVOC and OU was 81.50 %, 38.31 %, 64.38 %, and 76.86 %, respectively. The analysis of microbial community structure showed that temperature was the main environmental factor driving the microbial variations in latrine feces, while Firmicutes, Actinobacteria, Proteobacteria and Bacteroidetes were the main bacteria phyla involved in the formation and emission of malodorous gases. However, after adding the deodorant, the abundance of Bacteroidetes, Proteobacteria and Actinobacteria were decreased, while the abundance of Firmicutes was increased. Furthermore, P. fermentans successfully colonized in fecal substrates and became the dominant fungus after deodorization. These results expanded the understanding of the odor release from latrine feces, and the composited microbial deodorant provided a valuable basis to the management of odor pollution.

Antiurease Activity of Antibiotics: In Vitro, In Silico, Structure Activity Relationship, and MD Simulations of Cephalosporins and Fluoroquinolones

Helicobacter pylori infection is widespread in 50% of the world's population and is associated with gastric ulcers and related disorders that ultimately culminate in gastric cancer. Levofloxacin-based, or clarithromycin-based, triple therapy is frequently used to inhibit the bacterial urease enzyme for the eradication of H. pylori. A comprehensive investigation based on the urease inhibitory profiles of antibiotics and their computational implications is lacking in the scientific literature. The present study was aimed specifically to determine the antiurease activities within the realms of cephalosporins and fluoroquinolones by in vitro methods supported with in silico investigations. The results demonstrate the jack bean urease inhibitory activity of cephalosporins, wherein cefadroxil, cefpodoxime, cefotaxime, and cefaclor displayed inhibitions (IC50 21.35 ± 0.64 to 62.86 ± 0.78 μM) compared with the standard thiourea (IC50 21.25 ± 0.15 μM). Among fluoroquinolones, levofloxacin, ofloxacin, and gemifloxacin (IC50 7.24 ± 0.29 to 16.53 ± 0.85 μM) unveiled remarkable inhibitory profiles. Levofloxacin and ofloxacin exhibited competitive inhibition against the said enzyme. Ciprofloxacin and moxifloxacin displayed weak urease inhibitions. During molecular docking studies, Asp362, Gly279, Arg338, Asn168, Asp223, Gln364, and Met366 were involved in hydrogen bonding in fluoroquinolones, and hydrogen bonding was established with Arg338, His248, Asn168 residues, and metal Ni601 and Ni602 of the enzyme. MD simulations and MMPBSA results demonstrated the existence of significant protein-ligand binding. Overall, these results warrant further investigations into the significance of these active molecules in relation to their inhibitory potential against the targeted urease enzyme.

In vitro biological evaluation and in silico studies of linear diarylheptanoids from Curcuma aromatica Salisb. as urease inhibitors

Plants of the Zingiberaceae family, specifically those belonging to the Curcuma species, are commonly under consideration as potential therapeutic agents for the management of gastrointestinal diseases. In this study, we carried out a phytochemical study on Curcuma aromatica Salisb. (or so-called "Nghe trang" in Vietnamese) grown in Vietnam, which yields three newly discovered 3,5-diacetoxy diarylheptanoids (1-3) and six known 3,5-dihydroxyl diarylheptanoids (4-9). The bioactivity assessment shows that all isolated compounds, except compounds 3, 7, and 8, could inhibit urease. Compounds 4 and 9 significantly inhibit urease, with an IC50 value of 9.6 and 21.4 μM, respectively, more substantial than the positive control, hydroxyurea (IC50 = 77.4 μM). The structure-activity relationship (SAR) of linear diarylheptanoids was also established, suggesting that the hydroxyl groups at any position of skeleton diarylheptanoids are essential for exerting anti-urease action. Through a comparative analysis of the binding sites of hydroxyurea and diarylheptanoid compounds via our constructed in silico model, the mechanism of action of diarylheptanoid compounds is predicted to bind to the dynamic region close to the dinickel active center, resulting in a loss of catalytic activity. Such insights certainly help design and/or find diarylheptanoid-based compounds for treating gastric ulcers through inhibiting urease.

Synthesis and biological evaluation of triazolones/oxadiazolones as novel urease inhibitors

Urease is the main virulence factor of infectious gastritis and gastric ulcers. Urease inhibitors are regarded as the first choice for the treatment of such diseases. Based on the triazolone/oxadiazolone skeleton, a urea-like fragment being able to specifically bind the urease activity pocket and prevent urea from hydrolysis, we designed and synthesized 45 triazolones/oxadiazolones as urease inhibitors. Eight compounds were proved to show excellent inhibitory activity against Helicobacter pylori urease, being more potency than the clinically used urease inhibitor acetohydroxamic acid. The most active inhibitor with IC50 value of 1.2 μM was over 20-fold higher potent than the positive control. Enzymatic kinetic assays showed that these novel inhibitors reversibly inhibited urease with a mixed competitive mechanism. Molecular dockings provided evidence for the observations in enzyme assays. Furthermore, these novel inhibitors were proved as drug-like compounds with very low cytotoxicity to mammalian cells and favorable water solubility. These results suggested that triazolone and oxadiazolone were promising scaffolds for the design and discovery of novel urease inhibitors, and were expected as good candidates for further drug development.

Kinetic and structural details of urease inactivation by thiuram disulphides

This paper reports on the molecular details of the reactivity of urease, a nickel-dependent enzyme that catalyses the last step of organic nitrogen mineralization, with thiuram disulphides, a class of molecules known to inactivate the enzyme with high efficacy but for which the mechanism of action had not been yet established. IC50 values of tetramethylthiuram disulphide (TMTD or Thiram) and tetraethylthiuram disulphide (TETD or Disulfiram) in the low micromolar range were determined for plant and bacterial ureases. The X-ray crystal structure of Sporosarcina pasteurii urease inactivated by Thiram, determined at 1.68 Å resolution, revealed the presence of a covalent modification of the catalytically essential cysteine residue. This is located on the flexible flap that modulates the size of the active site channel and cavity. Formation of a Cys-S-S-C(S)-N(CH3)2 functionality responsible for enzyme inactivation was observed. Quantum-mechanical calculations carried out to rationalise the large reactivity of the active site cysteine support the view that a conserved histidine residue, adjacent to the cysteine in the active site flap, modulates the charge and electron density along the thiol SH bond by shifting electrons towards the sulphur atom and rendering the thiol proton more reactive. We speculate that this proton could be transferred to the nickel-coordinated urea amide group to yield a molecule of ammonia from the generated Curea-NH3+ functionality during catalysis.

Microbially Induced Calcium Carbonate Precipitation by Sporosarcina pasteurii: a Case Study in Optimizing Biological CaCO3 Precipitation

Current production of traditional concrete requires enormous energy investment that accounts for approximately 5 to 8% of the world's annual CO2 production. Biocement is a building material that is already in industrial use and has the potential to rival traditional concrete as a more convenient and more environmentally friendly alternative. Biocement relies on biological structures (enzymes, cells, and/or cellular superstructures) to mineralize and bind particles in aggregate materials (e.g., sand and soil particles). Sporosarcina pasteurii is a workhorse organism for biocementation, but most research to date has focused on S. pasteurii as a building material rather than a biological system. In this review, we synthesize available materials science, microbiology, biochemistry, and cell biology evidence regarding biological CaCO3 precipitation and the role of microbes in microbially induced calcium carbonate precipitation (MICP) with a focus on S. pasteurii. Based on the available information, we provide a model that describes the molecular and cellular processes involved in converting feedstock material (urea and Ca2+) into cement. The model provides a foundational framework that we use to highlight particular targets for researchers as they proceed into optimizing the biology of MICP for biocement production.

Natural Urease Inhibitors Reduce the Severity of Disease Symptoms, Dependent on the Lifestyle of the Pathogens

The development of new anti-ureolytic compounds is of great interest due to the newly discovered role of urease inhibitors in crop protection. Purine degradation and the generation of ammonium by urease are required for the full virulence of biotrophic and hemibiotrophic fungal plant pathogens. Accordingly, chemicals displaying urease inhibitor activity may be used as a novel class of fungicides. Several urease inhibitors belonging to different chemical classes are known, and some compounds have been developed as urea fertilizer additives. We tested whether the natural urease inhibitors p-benzoquinone (p-HQ) and hydroquinone (HQ), as well as the synthetic inhibitors isopropoxy carbonyl phosphoric acid amide (iCPAA), benzyloxy carbonyl phosphoric acid amide (bCPAA), and dipropyl-hexamino-1,3 diphosphazenium chloride (DDC), prevent or delay plant infection caused by pathogens differing in lifestyles and host plants. p-BQ, HQ, and DCC not only protected maize from infection by the hemibiotroph C. graminicola, but also inhibited the infection process of biotrophs such as the wheat powdery mildew fungus Blumeria graminis f. sp. tritici and the broad bean rust fungus Uromyces viciae-fabae. Interestingly, the natural quinone-based compounds even reduced the symptom severity of the necrotrophic fungi, i.e., the grey mold pathogen B. cinerea and the Southern Leaf Spot fungus C. heterostrophus, to some extent. The urease inhibitors p-BQ, HQ, and DCC interfered with appressorial penetration and confirmed the appropriateness of urease inhibitors as novel fungicidal agents.

Five decades of metalloenzymology

Metalloenzymes have been detailed in The Enzymes since its inception over half a century ago. Here, I review selected metal-containing enzyme highlights from early chapters in this series and I describe advances made since those contributions. Three topics are emphasized: nickel-containing enzymes, Fe(II)/2-oxoglutarate-dependent oxygenases, and enzymes containing non-canonical iron-sulfur clusters.

Unraveling Binding Mechanism and Stability of Urease Inhibitors: A QM/MM MD Study

Soil bacteria can produce urease, which catalyzes the hydrolysis of urea to ammonia (NH3) and carbamate. A variety of urease inhibitors have been proposed to reduce NH3 volatilization by interfering with the urease activity. We report a quantum mechanics/molecular mechanics molecular dynamics (QM/MM MD) study on the mechanism employed for the inhibition of urease by three representative competitive inhibitors; namely, acetohydroxamic acid (AHA), hydroxyurea (HU), and N-(n-butyl)phosphorictriamide (NBPTO). The possible connections between the structural and thermodynamical properties and the experimentally observed inhibition efficiency were evaluated and characterized. We demonstrate that the binding affinity decreases in the order NBPTO >> AHA > HU in terms of the computed activation and reaction free energies. This trend also indicates that NBPTO shows the highest inhibitory activity and the lowest IC50 value of 2.1 nM, followed by AHA (42 μM) and HU (100 μM). It was also found that the X=O moiety (X = carbon or phosphorous) plays a crucial role in the inhibitor binding process. These findings not only elucidate why the potent urease inhibitors are effective but also have implications for the design of new inhibitors.

Urea Decomposition Mechanism by Dinuclear Nickel Complexes

Urease is an enzyme containing a dinuclear nickel active center responsible for the hydrolysis of urea into carbon dioxide and ammonia. Interestingly, inorganic models of urease are unable to mimic its mechanism despite their similarities to the enzyme active site. The reason behind the discrepancy in urea decomposition mechanisms between inorganic models and urease is still unknown. To evaluate this factor, we synthesized two bis-nickel complexes, [Ni₂L(OAc)] (1) and [Ni₂L(Cl)(Et₃N)₂] (2), based on the Trost bis-Pro-Phenol ligand (L) and encompassing different ligand labilities with coordination geometries similar to the active site of jack bean urease. Both mimetic complexes produced ammonia from urea, (1) and (2), were ten- and four-fold slower than urease, respectively. The presence and importance of several reaction intermediates were evaluated both experimentally and theoretically, indicating the aquo intermediate as a key intermediate, coordinating urea in an outer-sphere manner. Both complexes produced isocyanate, revealing an activated water molecule acting as a base. In addition, the reaction with different substrates indicated the biomimetic complexes were able to hydrolyze isocyanate. Thus, our results indicate that the formation of an outer-sphere complex in the urease analogues might be the reason urease performs a different mechanism.

Optimized Ebselen-Based Inhibitors of Bacterial Ureases with Nontypical Mode of Action

Screening of 25 analogs of Ebselen, diversified at the N-aromatic residue, led to the identification of the most potent inhibitors of Sporosarcina pasteurii urease reported to date. The presence of a dihalogenated phenyl ring caused exceptional activity of these 1,2-benzisoselenazol-3(2H)-ones, with K_i value in a low picomolar range (<20 pM). The affinity was attributed to the increased π-π and π-cation interactions of the dihalogenated phenyl ring with αHis323 and αArg339 during the initial step of binding. Complementary biological studies with selected compounds on the inhibition of ureolysis in whole Proteus mirabilis cells showed a very good potency (IC₅₀ < 25 nM in phosphate-buffered saline (PBS) buffer and IC₉₀ < 50 nM in a urine model) for monosubstituted N-phenyl derivatives. The crystal structure of S. pasteurii urease inhibited by one of the most active analogs revealed the recurrent selenation of the Cys322 thiolate, yielding an unprecedented Cys322-S-Se-Se chemical moiety.

Biomimetics for purple acid phosphatases: A historical perspective

Biomimetics hold potential for varied applications in biotechnology and medicine but have also attracted particular interest as benchmarks for the functional study of their more complex biological counterparts, e.g. metalloenzymes. While many of the synthetic systems adequately mimic some structural and functional aspects of their biological counterparts the catalytic efficiencies displayed are mostly far inferior due to the smaller size and the associated lower complexity. Nonetheless they play an important role in bioinorganic chemistry. Numerous examples of biologically inspired and informed artificial catalysts have been reported, designed to mimic a plethora of chemical transformations, and relevant examples are highlighted in reviews and scientific reports. Herein, we discuss biomimetics of the metallohydrolase purple acid phosphatase (PAP), examples of which have been used to showcase synergistic research advances for both the biological and synthetic systems. In particular, we focus on the seminal contribution of our colleague Prof. Ademir Neves, and his group, pioneers in the design and optimization of suitable ligands that mimic the active site of PAP.

A Structure-Based Mechanism for the Denaturing Action of Urea, Guanidinium Ion and Thiocyanate Ion

An exhaustive analysis of all the protein structures deposited in the Protein Data Bank, here performed, has allowed the identification of hundredths of protein-bound urea molecules and the structural characterization of such binding sites. It emerged that, even though urea molecules are largely involved in hydrogen bonds with both backbone and side chains, they are also able to make van der Waals contacts with nonpolar moieties. As similar findings have also been previously reported for guanidinium and thiocyanate, this observation suggests that promiscuity is a general property of protein denaturants. Present data provide strong support for a mechanism based on the protein-denaturant direct interactions with a denaturant binding model to equal and independent sites. In this general framework, our investigations also highlight some interesting insights into the different denaturing power of urea compared to guanidinium/thiocyanate.

Piperazine-based Semicarbazone Derivatives as Potent Urease Inhibitors: Design, Synthesis, and Bioactivity Screening

Background:

An enzyme called urease assists highly pathogenic bacteria in colonizing and maintaining themselves. Accordingly, inhibiting urease enzymes has been shown to be a promising strategy for preventing ureolytic bacterial infections.

Objective:

This study aimed to synthesize and evaluate the bioactivity of a series of semicarbazone derivatives.

Methods:

A series of piperazine-based semicarbazone derivatives 5a-o were synthesized and isolated, and their structures were elucidated by 1H-NMR and 13C-NMR spectroscopic techniques besides MS and elemental analysis. The urease inhibition activity of these compounds was evaluated using the standard urease enzyme inhibition kit. An MTT assay was performed on two different cell lines (NIH-3T3 and MCF-7) to investigate the cytotoxicity profile.

Results:

All semicarbazone 5a-o exhibited higher urease inhibition activity (3.95–6.62 μM) than the reference standards thiourea and hydroxyurea (IC50: 22 and 100 μM, respectively). Derivatives 5m and 5o exhibited the best activity with the IC50 values of 3.95 and 4.05 μM, respectively. Investigating the cytotoxicity profile of the target compound showed that all compounds 5a-o have IC50 values higher than 50 μM for both tested cell lines.

Conclusion:

The results showed that semicarbazone derivatives could be highly effective as urease inhibitors.

Inhibition of Urease by Hydroquinones: A Structural and Kinetic Study

Hydroquinones are a class of organic compounds abundant in nature that result from the full reduction of the corresponding quinones. Quinones are known to efficiently inhibit urease, a Ni^II -containing enzyme that catalyzes the hydrolysis of urea to yield ammonia and carbonate and acts as a virulence factor of several human pathogens, in addition to decreasing the efficiency of soil organic nitrogen fertilization. Here, we report the molecular characterization of the inhibition of urease from Sporosarcina pasteurii (SPU) and Canavalia ensiformis (jack bean, JBU) by 1,4-hydroquinone (HQ) and its methyl and tert-butyl derivatives. The 1.63-Å resolution X-ray crystal structure of the SPU-HQ complex discloses that HQ covalently binds to the thiol group of αCys322, a key residue located on a mobile protein flap directly involved in the catalytic mechanism. Inhibition kinetic data obtained for the three compounds on JBU reveals the occurrence of an irreversible inactivation process that involves a radical-based autocatalytic mechanism.

A Multicalibration Urea Potentiometric Sensing Array Based on Au@urease Nanoparticles and Its Application in Home Detection

Home potentiometric sensing devices can real-time monitor personal health status and are widely used in the prevention and management of related diseases. However, variations in the composition and the pH of the sample matrix tend to change the basic potential and response slope of some potentiometric sensors, thus affecting detection reliability. Therefore, this work uses the detection of urea in urine as a model to improve reliability of the potentiometric sensor in home detection. Au@urease nanoparticles were synthesized as the sensing material to improve the stability of the urease-based potentiometric sensor. Meanwhile, a multicalibrated urea potential (MCUP) sensing array was designed, which consists of a urea electrode group, a pH electrode group, and a reference channel. The urea electrode group and the pH electrode group contain respectively a sensing channel and a calibration channel. The basic potential of sensing channels can be calibrated through the corresponding calibration channels. Moreover, the pH electrode group can not only measure the pH values of the samples but also calibrate the response slope of the urea electrode group through the calibration coefficient, thus improving the reliability of home detection. Consequently, the potentiometric sensing array based on the enzyme reaction can be applied in body fluids with a wide pH range.

Design and synthesis of new N-thioacylated ciprofloxacin derivatives as urease inhibitors with potential antibacterial activity

A new series of N-thioacylated ciprofloxacin 3a-n were designed and synthesized based on Willgerodt-Kindler reaction. The results of in vitro urease inhibitory assay indicated that almost all the synthesized compounds 3a-n (IC₅₀ = 2.05 ± 0.03-32.49 ± 0.32 μM) were more potent than standard inhibitors, hydroxyurea (IC₅₀ = 100 ± 2.5 μM) and thiourea (IC₅₀ = 23 ± 0.84 μM). The study of antibacterial activity against Gram-positive species (S. aureus and S. epidermidis) revealed that the majority of compounds were more active than ciprofloxacin as the standard drug, and 3h derivative bearing 3-fluoro group had the same effect as ciprofloxacin against Gram-negative bacteria (P. aeruginosa and E. coli). Based on molecular dynamic simulations, compound 3n exhibited pronounced interactions with the critical residues of the urease active site and mobile flap pocket so that the quinolone ring coordinated toward the metal bi-nickel center and the essential residues at the flap site like His593, His594, and Arg609. These interactions caused blocking the active site and stabilized the movement of the mobile flap at the entrance of the active site channel, which significantly reduced the catalytic activity of urease. Noteworthy, 3n also exhibited IC₅₀ values of 5.59 ± 2.38 and 5.72 ± 1.312 µg/ml to inhibit urease enzyme against C. neoformans and P. vulgaris in the ureolytic assay.

A Review of Enzyme-Induced Calcium Carbonate Precipitation Applicability in the Oil and Gas Industry

Enzyme-induced calcium carbonate precipitation (EICP) techniques are used in several disciplines and for a wide range of applications. In the oil and gas industry, EICP is a relatively new technique and is actively used for enhanced oil recovery applications, removal of undesired chemicals and generating desired chemicals in situ, and plugging of fractures, lost circulation, and sand consolidation. Many oil- and gas-bearing formations encounter the problem of the flow of sand grains into the wellbore along with the reservoir fluids. This study offers a detailed review of sand consolidation using EICP to solve and prevent sand production issues in oil and gas wells. Interest in bio-cementation techniques has gained a sharp increase recently due to their sustainable and environmentally friendly nature. An overview of the factors affecting the EICP technique is discussed with an emphasis on the in situ reactions, leading to sand consolidation. Furthermore, this study provides a guideline to assess sand consolidation performance and the applicability of EICP to mitigate sand production issues in oil and gas wells.

Rational Development of Bacterial Ureases Inhibitors

Urease, an enzyme that catalyzes the hydrolysis of urea, is a virulence factor of various pathogenic bacteria. In particular, Helicobacter pylori, that colonizes the digestive tract and Proteus spp., that can infect the urinary tract, are related to urease activity. Therefore, urease inhibitors are considered as potential therapeutics against these infections. This review describes current knowledge of the structures, activity, and biological importance of bacterial ureases. Moreover, the structure-based design of several classes of bacterial urease inhibitors is presented and discussed. Phosphinic and phosphonic acids were applied as transition-state analogues, while Michael acceptors and ebselen derivatives were applied as covalent binders of cysteine residue. This review incorporates bacterial urease inhibitors from literature published between 2008 and 2021.

An overview on the synthetic urease inhibitors with structure-activity relationship and molecular docking

Urease is a kind of enzyme which could be found in various bacteria, fungi, plants, and algae, which can quickly catalyze the hydrolysis of urea into ammonia and carbon dioxide. With the ammonia concentration increasing, the activity of Helicobacter pylori has got an obvious enhancement and leads to mucosal damage in the stomach, gastroduodenal infection, peptic ulcers, and gastric cancer. The infectious diseases caused by Helicobacter pylori can be controlled to a certain extent by inhibiting urease activity with urease inhibitors. Hence, studies of urease inhibitors have attracted great attention all over the world and a variety of effective urease inhibitors have been synthesized in recent years. In this review, we will draw summaries for these inhibitors including urease inhibitory activity, inhibition kinetics, structure-activity relationship, and molecular docking. The collected information is expected to provide rational guidance and effective strategy to develop novel, potent, and safe urease inhibitors for better practical applications in the future.

QM/MM Molecular Dynamics Simulations Revealed Catalytic Mechanism of Urease

Urease catalyzes the hydrolysis of urea to form ammonia and carbamate, inducing an overall pH increase that affects both human health and agriculture. Inhibition, mutagenesis, and kinetic studies have provided insights into its enzymatic role, but there have been debates on the substrate binding mode as well as the reaction mechanism. In the present study, we report quatum mechanics-only (QM-only) and quantum mechanics/molecular mechanics molecular dynamics (QM/MM MD) calculations on urease that mainly investigate the binding mode of urea and the mechanism of the urease-catalyzed hydrolysis reaction. Comparison between the experimental data and our QM(GFN2-xTB)/MM metadynamics results demonstrates that urea hydrolysis via a complex with bidentate-bound urea is much more favorable than via that with monodentate-bound urea for both nucleophilic attack and the subsequent proton transfer steps. We also indicate that the bidentate coordination of urea fits the active site with a closed conformation of the mobile flap and can facilitate the stabilization of transition states and intermediates by forming multiple hydrogen bonds with certain active site residues.

Synthesis and Biological Evaluation of Dithiobisacetamides as Novel Urease Inhibitors

Thirty-eight disulfides containing N-arylacetamide were designed and synthesized in an effort to develop novel urease inhibitors. Biological evaluation revealed that some of the synthetic compounds exhibited strong inhibitory potency against both cell-free urease and urease in intact cell with low cytotoxicity to mammalian cells even at concentration up to 250 μM. Of note, 2,2'-dithiobis(N-(2-fluorophenyl)acetamide) (d7), 2,2'-dithiobis(N-(3,5-difluorophenyl)acetamide) (d24), and 2,2'-dithiobis(N-(3-fluorophenyl)acetamide) (d8) were here identified as the most active inhibitors with IC₅₀ of 0.074, 0.44, and 0.81 μM, showing 32- to 355-fold higher potency than the positive control acetohydroxamic acid. These disulfides were confirmed to bind urease without covalent modification of the cysteine residue and to inhibit urease reversibly with a mixed inhibition mechanism. They also showed very good anti-Helicobacter pylori activities with d8 showing a comparable potency to the clinical used drug amoxicillin. The impressive in vitro biological profile indicated their immense potential as therapeutic agents to tackle H. pylori caused infections.

Medicinal Au(I) compounds targeting urease as prospective antimicrobial agents: unveiling the structural basis for enzyme inhibition

A few gold compounds were recently found to show antimicrobial properties in vitro, holding great promise for the discovery of new drugs to overcome antibiotic resistance. Here, the inhibition of the bacterial virulence factor urease by four Au(I)-compounds, namely Au(PEt₃)Cl, Au(PEt₃)Br, Au(PEt₃)I and [Au(PEt₃)₂]Cl, obtained from the antiarthritic Au(I)-drug Auranofin and earlier reported to act as antimicrobials, is investigated. The three monophosphino Au(I) complexes showed IC₅₀ values in the 30-100 nM range, while the diphosphino Au(I) complex, though being less active, still showed a IC₅₀ value of 7 μM. The structural basis for this inhibition was provided by solving the crystal structures of urease co-crystallized with Au(PEt₃)I and [Au(PEt₃)₂]Cl: at least two Au(I) ions bind the enzyme in a flap domain involved in the catalysis, thus obliterating enzyme activity. Peculiar changes observed in the two structures reveal implications for the mechanism of soft metal binding and enzyme inactivation.

High-throughput tandem-microwell assay for ammonia repositions FDA-Approved drugs to inhibit Helicobacter pylori urease

To date, little attempt has been made to develop new treatments for Helicobacter pylori (H. pylori), although the community is aware of the shortage of treatments for H. pylori. In this study, we developed a 192-tandem-microwell-based high-throughput assay for ammonia that is a known virulence factor of H. pylori and a product of urease. We could identify few drugs, that is, panobinostat, dacinostat, ebselen, captan, and disulfiram, to potently inhibit the activity of ureases from bacterial or plant species. These inhibitors suppress the activity of urease via substrate-competitive or covalent-allosteric mechanism, but all except captan prevent the antibiotic-resistant H. pylori strain from killing human gastric cells, with a more pronounced effect than acetohydroxamic acid, a well-known urease inhibitor and clinically used drug for the treatment of bacterial infection. This study offers several bases for the development of new treatments for urease-containing pathogens and to study the mechanism responsible for the regulation of urease activity.

Nickel as a virulence factor in the Class I bacterial carcinogen, Helicobacter pylori

Helicobacter pylori is a human bacterial pathogen that causes peptic ulcers and has been designated a Class I carcinogen by the International Agency for Research on Cancer (IARC). Its ability to survive in the acid environment of the stomach, to colonize the stomach mucosa, and to cause cancer, are linked to two enzymes that require nickel-urease and hydrogenase. Thus, nickel is an important virulence factor and the proteins involved in nickel trafficking are potential antibiotic targets. This review summarizes the nickel biochemistry of H. pylori with a focus on the roles of nickel in virulence, nickel homeostasis, maturation of urease and hydrogenase, and the unique nickel trafficking that occurs between the hydrogenase maturation pathway and urease nickel incorporation that is mediated by the metallochaperone HypA and its partner, HypB.

Unveiling the urease like intrinsic catalytic activities of two dinuclear nickel complexes towards the in situ syntheses of aminocyanopyridines

Designing metal complexes as functional models for metalloenzymes remains one of the main targets in synthetic bioinorganic chemistry. Furthermore, the utilization of the product(s) derived from the catalytic reaction for subsequent organic transformation that occurs in biological systems is an even more difficult challenge for biochemists. Urease, the most efficient enzyme known, catalyzes the hydrolysis of urea and it contains an essential dinuclear Ni^II cluster in the active site. Inspired by the catalytic properties of urease, two dinickel(ii) complexes viz. Ni₂L¹₂(OAc)₂(H₂O) (1) and Ni₂L²₂(OAc)₂(H₂O) (2) [HL1 = 2,4-dimethyl-6-{[(2'-dimethyl aminoethyl)methylamino]methyl}-phenol and HL2 = 2,4-dichloro-6-{[(2'-dimethyl aminoethyl)methylamino]methyl}-phenol] have been synthesized and characterized in this report. Both the complexes have shown the urease kind of activity with the liberation of ammonia from urea in aqueous solution. The plausible mechanistic pathway and kinetics of the reactions have been studied. Besides, the liberated ammonia has been utilized in the one-pot synthesis of biologically active products like 2-amino-3-cyanopyridines and their derivatives in aqueous medium with excellent yields.

Inhibition of Urease, a Ni-Enzyme: The Reactivity of a Key Thiol With Mono- and Di-Substituted Catechols Elucidated by Kinetic, Structural, and Theoretical Studies

The inhibition of urease from Sporosarcina pasteurii (SPU) and Canavalia ensiformis (jack bean, JBU) by a class of six aromatic poly-hydroxylated molecules, namely mono- and dimethyl-substituted catechols, was investigated on the basis of the inhibitory efficiency of the catechol scaffold. The aim was to probe the key step of a mechanism proposed for the inhibition of SPU by catechol, namely the sulfanyl radical attack on the aromatic ring, as well as to obtain critical information on the effect of substituents of the catechol aromatic ring on the inhibition efficacy of its derivatives. The crystal structures of all six SPU-inhibitors complexes, determined at high resolution, as well as kinetic data obtained on JBU and theoretical studies of the reaction mechanism using quantum mechanical calculations, revealed the occurrence of an irreversible inactivation of urease by means of a radical-based autocatalytic multistep mechanism, and indicate that, among all tested catechols, the mono-substituted 3-methyl-catechol is the most efficient inhibitor for urease.

A small-molecular inhibitor against Proteus mirabilis urease to treat catheter-associated urinary tract infections

Infection and blockage of indwelling urinary catheters is significant owing to its high incidence rate and severe medical consequences. Bacterial enzymes are employed as targets for small molecular intervention in human bacterial infections. Urease is a metalloenzyme known to play a crucial role in the pathogenesis and virulence of catheter-associated Proteus mirabilis infection. Targeting urease as a therapeutic candidate facilitates the disarming of bacterial virulence without affecting bacterial fitness, thereby limiting the selective pressure placed on the invading population and lowering the rate at which it will acquire resistance. We describe the design, synthesis, and in vitro evaluation of the small molecular enzyme inhibitor 2-mercaptoacetamide (2-MA), which can prevent encrustation and blockage of urinary catheters in a physiologically representative in vitro model of the catheterized urinary tract. 2-MA is a structural analogue of urea, showing promising competitive activity against urease. In silico docking experiments demonstrated 2-MA's competitive inhibition, whilst further quantum level modelling suggests two possible binding mechanisms.

Covalent Inhibition of Bacterial Urease by Bifunctional Catechol-Based Phosphonates and Phosphinates

In this study, a new class of bifunctional inhibitors of bacterial ureases, important molecular targets for antimicrobial therapies, was developed. The structures of the inhibitors consist of a combination of a phosphonate or (2-carboxyethyl)phosphinate functionality with a catechol-based fragment, which are designed for complexation of the catalytic nickel ions and covalent bonding with the thiol group of Cys322, respectively. Compounds with three types of frameworks, including β-3,4-dihydroxyphenyl-, α-3,4-dihydroxybenzyl-, and α-3,4-dihydroxybenzylidene-substituted derivatives, exhibited complex and varying structure-dependent kinetics of inhibition. Among irreversible binders, methyl β-(3,4-dihydroxyphenyl)-β-(2-carboxyethyl)phosphorylpropionate was observed to be a remarkably reactive inhibitor of Sporosarcina pasteurii urease (k_inact/K_I = 10 420 s^-1 M^-1). The high potential of this group of compounds was also confirmed in Proteus mirabilis whole-cell-based inhibition assays. Some compounds followed slow-binding and reversible kinetics, e.g., methyl β-(3,4-dihydroxyphenyl)-β-phosphonopropionate, with K_i* = 0.13 μM, and an atypical low dissociation rate (residence time τ = 205 min).

Synthesis, density functional theory (DFT) studies and urease inhibition activity of chiral benzimidazoles

A variety of benzimidazole by the heterocyclization of orthophenylenediamine were synthesized in 69–86% yields. The synthesized compounds 3a-f and 6a-f were characterized and further investigated as jack bean urease inhibitors. Density functional theory (DFT) studies were performed utilizing the basis set B3LYP/6-31G (d, p) to acquire perception into their structural properties. Frontier molecular orbital (FMO) analysis of all compounds 3a–f and 6a-f was computed at the same level of theory to get a notion about their chemical reactivity and stability. The mapping of the molecular electrostatic potential (MEP) over the entire stabilized molecular geometry indicated the reactive centers. They exhibited urease inhibition activity with IC50 between 22 and 99 μM. Compounds containing withdrawing groups on the benzene ring (3d, 6d) were not showing significant urease inhibition. The value obtained for 3a, 3b, 3f had shown their significant urease inhibition for both theoretical and experimental. Notably, the compound having S-configuration (3a) (22.26 ± 6.2 μM) was good as compared to its R enantiomer 3f (31.42 ± 23.3 μM). Despite this, we elaborated the computational studies of the corresponding compounds, to highlight electronic effect which include HOMO, LUMO, Molecular electrostatic potential (MEP) and molecular docking.

High-resolution cryo-EM structure of urease from the pathogen Yersinia enterocolitica

Urease converts urea into ammonia and carbon dioxide and makes urea available as a nitrogen source for all forms of life except animals. In human bacterial pathogens, ureases also aid in the invasion of acidic environments such as the stomach by raising the surrounding pH. Here, we report the structure of urease from the pathogen Yersinia enterocolitica at 2 Å resolution from cryo-electron microscopy. Y. enterocolitica urease is a dodecameric assembly of a trimer of three protein chains, ureA, ureB and ureC. The high data quality enables detailed visualization of the urease bimetal active site and of the impact of radiation damage. The obtained structure is of sufficient quality to support drug development efforts.

Urease is a nickel enzyme responsible for catalyzing the conversion of urea into ammonia and carbon dioxide. Here the authors report a high resolution cryo-EM structure of urease from the bacterial pathogen Yersinia enterocolitica, providing a detailed visualization of the urease bimetal active site and a basis for drug development.

N-monosubstituted thiosemicarbazide as novel Ure inhibitors: synthesis, biological evaluation and molecular docking

Background: Identification of novel Ure inhibitors with high potency has received considerable attention. Methodology & results: Ure inhibition was determined using the indophenol method, the affinities to Ure were estimated via surface plasmon resonance. Seventeen new plus ten known N-monosubstituted thiosemicarbazides were synthesized and identified as novel Ure inhibitors. Out of these compounds, compound b5 shows excellent activity against both crude Ure from Helicobacter pylori (IC₅₀ = 0.04 μM) and Ure in living cell (IC₅₀ = 0.27 μM), with the potency being over 600-fold higher than clinical used drug acetohyroxamic acid, respectively. Surface plasmon resonance demonstrated the high affinity (K_d.#x00A0;= 6.32 nM) of b5 to Ure. Conclusion: This work provides a class of novel and promising Ure inhibitors.

The structure-based reaction mechanism of urease, a nickel dependent enzyme: tale of a long debate

This review is an attempt to retrace the chronicle that starts from the discovery of the role of nickel as the essential metal ion in urease for the enzymatic catalysis of urea, a key step in the biogeochemical cycle of nitrogen on Earth, to the most recent progress in understanding the chemistry of this historical enzyme. Data and facts are presented through the magnifying lenses of the authors, using their best judgment to filter and elaborate on the many facets of the research carried out on this metalloenzyme over the years. The tale is divided in chapters that discuss and describe the results obtained in the subsequent leaps in the knowledge that led from the discovery of a biological role for Ni to the most recent advancements in the comprehension of the relationship between the structure and function of urease. This review is intended not only to focus on the bioinorganic chemistry of this beautiful metal-based catalysis, but also, and maybe primarily, to evoke inspiration and motivation to further explore the realm of bio-based coordination chemistry.

Targeting the Protein Tunnels of the Urease Accessory Complex: A Theoretical Investigation

Urease is a nickel-containing enzyme that is essential for the survival of several and often deadly pathogenic bacterial strains, including Helicobacter pylori. Notwithstanding several attempts, the development of direct urease inhibitors without side effects for the human host remains, to date, elusive. The recently solved X-ray structure of the HpUreDFG accessory complex involved in the activation of urease opens new perspectives for structure-based drug discovery. In particular, the quaternary assembly and the presence of internal tunnels for nickel translocation offer an intriguing possibility to target the HpUreDFG complex in the search of indirect urease inhibitors. In this work, we adopted a theoretical framework to investigate such a hypothesis. Specifically, we searched for putative binding sites located at the protein–protein interfaces on the HpUreDFG complex, and we challenged their druggability through structure-based virtual screening. We show that, by virtue of the presence of tunnels, some protein–protein interfaces on the HpUreDFG complex are intrinsically well suited for hosting small molecules, and, as such, they possess good potential for future drug design endeavors.

Structure, function, and biosynthesis of nickel-dependent enzymes

Nickel enzymes, present in archaea, bacteria, plants, and primitive eukaryotes are divided into redox and nonredox enzymes and play key functions in diverse metabolic processes, such as energy metabolism and virulence. They catalyze various reactions by using active sites of diverse complexities, such as mononuclear nickel in Ni-superoxide dismutase, glyoxylase I and acireductone dioxygenase, dinuclear nickel in urease, heteronuclear metalloclusters in [NiFe]-carbon monoxide dehydrogenase, acetyl-CoA decarbonylase/synthase and [NiFe]-hydrogenase, and even more complex cofactors in methyl-CoM reductase and lactate racemase. The presence of metalloenzymes in a cell necessitates a tight regulation of metal homeostasis, in order to maintain the appropriate intracellular concentration of nickel while avoiding its toxicity. As well, the biosynthesis and insertion of nickel active sites often require specific and elaborated maturation pathways, allowing the correct metal to be delivered and incorporated into the target enzyme. In this review, the phylogenetic distribution of nickel enzymes will be briefly described. Their tridimensional structures as well as the complexity of their active sites will be discussed. In view of the latest findings on these enzymes, a special focus will be put on the biosynthesis of their active sites and nickel activation of apo-enzymes.

Formation of Unstable and very Reactive Chemical Species Catalyzed by Metalloenzymes: A Mechanistic Overview

Nature has tailored a wide range of metalloenzymes that play a vast array of functions in all living organisms and from which their survival and evolution depends on. These enzymes catalyze some of the most important biological processes in nature, such as photosynthesis, respiration, water oxidation, molecular oxygen reduction, and nitrogen fixation. They are also among the most proficient catalysts in terms of their activity, selectivity, and ability to operate at mild conditions of temperature, pH, and pressure. In the absence of these enzymes, these reactions would proceed very slowly, if at all, suggesting that these enzymes made the way for the emergence of life as we know today. In this review, the structure and catalytic mechanism of a selection of diverse metalloenzymes that are involved in the production of highly reactive and unstable species, such as hydroxide anions, hydrides, radical species, and superoxide molecules are analyzed. The formation of such reaction intermediates is very difficult to occur under biological conditions and only a rationalized selection of a particular metal ion, coordinated to a very specific group of ligands, and immersed in specific proteins allows these reactions to proceed. Interestingly, different metal coordination spheres can be used to produce the same reactive and unstable species, although through a different chemistry. A selection of hand-picked examples of different metalloenzymes illustrating this diversity is provided and the participation of different metal ions in similar reactions (but involving different mechanism) is discussed.