A Wetting and Capture Strategy Overcoming Electrostatic Repulsion for Electroreduction of Nitrate to Ammonia from Low-Concentration Sewage

Ammonia production by electrocatalytic nitrate reduction reaction (NO3RR) in water streams is anticipated as a zero-carbon route. Limited by dilute nitrate in natural sewage and the electrostatic repulsion between NO3 - and cathode, NO3RR can hardly be achieved energy-efficiently. The hydrophilic Cu@CuCoO2 nano-island dispersed on support can enrich NO3 - and produce a sensitive current response, followed by electrosynthesis of ammonia through atomic hydrogen (*H) is reported. The accumulated NO3 - can be partially converted to NO2 - without external electric field input, confirming that the Cu@CuCoO2 nano-island can strongly bind NO3 - and then trigger the reduction via dynamic evolution between Cu-Co redox sites. Through the identification of intermediates and theoretical computation. it is found that the N-side hydrogenation of *NO is the optimal reaction step, and the formation of N─N dimer may be prevented. An NH3 product selectivity of 93.5%, a nitrate conversion of 96.1%, and an energy consumption of 0.079 kWh gNH3 -1 is obtained in 48.9 mg-N L-1 naturally nitrate-polluted streams, which outperforms many works using such dilute nitrate influent. Conclusively, the electrocatalytic system provides a platform to guarantee the self-sufficiency of dispersed ammonia production in agricultural regions.

Amorphous K-Co-Mo-Sx Chalcogel: A Synergy of Surface Sorption and Ion-Exchange

Chalcogel represents a unique class of meso- to macroporous nanomaterials that offer applications in energy and environmental pursuits. Here, the synthesis of an ion-exchangeable amorphous chalcogel using a nominal composition of K2CoMo2S10 (KCMS) at room temperature is reported. Synchrotron X-ray pair distribution function (PDF), X-ray absorption near-edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) reveal a plausible local structure of KCMS gel consisting of Mo5+ 2 and Mo4+ 3 clusters in the vicinity of di/polysulfides which are covalently linked by Co2+ ions. The ionically bound K+ ions remain in the percolating pores of the Co-Mo-S covalent network. XANES of Co K-edge shows multiple electronic transitions, including quadrupole (1s→3d), shakedown (1s→4p + MLCT), and dipole allowed 1s→4p transitions. Remarkably, despite a lack of regular channels as in some crystalline solids, the amorphous KCMS gel shows ion-exchange properties with UO2 2+ ions. Additionally, it also presents surface sorption via [S∙∙∙∙UO2 2+] covalent interactions. Overall, this study underscores the synthesis of quaternary chalcogels incorporating alkali metals and their potential to advance separation science for cations and oxo-cationic species by integrating a synergy of surface sorption and ion-exchange.

Crystalline metal phosphide-coated amorphous iron oxide-hydroxide (FeOOH) with oxygen vacancies as highly active and stable oxygen evolution catalyst in alkaline seawater at high current density

In this study, we employed a straightforward phosphorylation approach to achieve a dual objective: constructing c-a heterostructures consisting of crystalline Ni12P5 and amorphous FeOOH, while simultaneously enhancing oxygen vacancies. The resulting oxygen evolution reaction (OER) catalyst, Ni12P5/FeOOH/NF, exhibited remarkable performance with current densities of 500 mA cm-2 in both 1 M KOH and 1 M KOH + seawater, requiring low overpotentials of only 288 and 365 mV, respectively. Furthermore, Ni12P5/FeOOH/NF exhibited only a slight increase in overpotential, with increments of 18 mV and 70 mV in 1 M KOH after 15 and 150 h, and 32 mV and 108 mV in 1 M KOH + seawater at 500 mA cm-2 after 15 and 150 h, respectively. This minimal change can be attributed to the stabilized c-a structure, the protective coating of Ni12P5, and superhydrophilic. Through in-situ Raman and ex-situ XPS analysis, we discovered that Ni12P5/FeOOH/NF can undergo a reconfiguration into an oxygen vacancy-rich (Fe/Ni)OOH phase during OER process. The elevated OER activity is mainly due to the contribution of the oxygen vacancy-rich (Fe/Ni)OOH phase from the reconfigure of the Ni12P5/FeOOH/NF. This finding emphasizes the critical role of oxygen vacancies in facilitating the production of OO species and overcoming the limitations associated with OOH formation, ultimately enhancing the kinetics of the OER.

Synergistic effects of interface and phase engineering on telluride toward alkaline/neutral hydrogen evolution reaction in freshwater/seawater

The development of efficient, stable, and versatile hydrogen evolution electrocatalysts is of great meaning, but still faces challenging. Interface engineering and phase engineering have been immensely applied in the field of hydrogen evolution reaction (HER) because of their unique physicochemical properties. However, they are typically used separately, which limits their effectiveness. Herein, we propose an interface-engineered CoMo/CoTe electrocatalyst, consisting of an amorphous CoMo (a-CoMo) layer-encapsulated crystalline CoTe array, achieving the profound optimization of catalytic performance. The experimental results and density functional theory calculations show that the d-band center of the catalyst shifts further upward in contrast with its crystalline-crystalline counterpart, optimizing the electronic structure and the intermediate adsorption, thereby reducing the kinetic barrier of HER. The a-CoMo/CoTe with superhydrophilic/superaerophobic features shows excellent catalytic performance in alkaline, neutral, and simulated seawater environments.

Laser-Induced Controllable Porosity in Additive Manufacturing Boosts Efficiency of Electrocatalytic Water Splitting

In laser-based additive manufacturing (AM), porosity and unmelted metal powder are typically considered undesirable and harmful. Nevertheless in this work, precisely controlling laser parameters during printing can intentionally introduce controllable porosity, yielding a porous electrode with enhanced catalytic activity for the oxygen evolution reaction (OER). This study demonstrates that deliberate introduction of porosity, typically considered a defect, leads to improved gas molecule desorption, enhanced mass transfer, and increased catalytically active sites. The optimized P-93% electrode displays superior OER performance with an overpotential of 270 mV at 20 mA cm-2. Furthermore, it exhibits remarkable long-term stability, operating continuously for over 1000 h at 10 mA cm-2 and more than 500 h at 500 mA cm-2. This study not only provides a straightforward and mass-producible method for efficient, binder-free OER catalysts but also, if optimized, underscores the potential of laser-based AM driven defect engineering as a promising strategy for industrial water splitting.

Template-Assisted in situ synthesis of superaerophobic bimetallic MOF composites with tunable morphology for boosted oxygen evolution reaction

CoFe bimetallic organic frameworks (CoFe-MOFs) with tunable morphology and electronic structure are synthesized in situ utilizing cobalt hydroxide (Co(OH)2) as a semi-sacrificial template and different anionic iron salts as modifying factors in a non-calcined synthesis method. This work defines the impact of three different anionic metallic iron salts (FeCl3, Fe(NO3)3, and Fe2(SO4)3) on the morphology of MOF materials and their resulting oxygen evolution reaction (OER) catalytic activity. Employing ferric chloride (FeCl3) as the metallic iron source, heterostructured electrocatalysts (BN-CoFe-MOF) with nanoparticles decorated nanoneedle tips are obtained, exhibiting a low overpotential (230 mV at 10 mA cm-2) and a Tafel slope of 105.6 mV dec-1 in 1.0 M KOH. It also demonstrates long time stability for at least 50 h at a current density of 10 mA cm-2. The investigation uncovers that the splendid OER activity and stability of the BN-CoFe-MOF heterojunction can be attributed to its large specific surface area, desirable mesoporous structure, superaerophobic characteristic, and high exposure of active centers. This work not only provides an efficient and cost-effective MOF based OER electrocatalyst but also serves as a valuable reference for future research on morphology control and strategies to enhance the OER activity of MOF catalysts.

Structural regulation of amorphous molybdenum sulfide by atomic palladium doping for hydrogen evolution

Molybdenum sulfide materials have long been considered as attractive non-precious-metal electrocatalysts for the hydrogen evolution reaction (HER). However, comparing with the crystalline counterpart, amorphous MoSx has been less investigated previously. We here propose to increase the catalytical activity of a-MoSx by raising the reactant concentration at the catalytic interface via a chemical doping approach. The reconstruction of coordination structure of a-MoSx via Pd doping induces the formation of abundant unsaturated S atoms. Moreover, the reactant friendly catalytic interface is constructed through introducing hydrophilic groups to a-MoSx. The doped a-MoSx catalyst exhibits significantly enhanced HER activity in both acid and alkaline media.

Unlocking Efficiency: Minimizing Energy Loss in Electrocatalysts for Water Splitting

Catalysts play a crucial role in water electrolysis by reducing the energy barriers for hydrogen and oxygen evolution reactions (HER and OER). Research aims to enhance the intrinsic activities of potential catalysts through material selection, microstructure design, and various engineering techniques. However, the energy consumption of catalysts has often been overlooked due to the intricate interplay among catalyst microstructure, dimensionality, catalyst-electrolyte-gas dynamics, surface chemistry, electron transport within electrodes, and electron transfer among electrode components. Efficient catalyst development for high-current-density applications is essential to meet the increasing demand for green hydrogen. This involves transforming catalysts with high intrinsic activities into electrodes capable of sustaining high current densities. This review focuses on current improvement strategies of mass exchange, charge transfer, and reducing electrode resistance to decrease energy consumption. It aims to bridge the gap between laboratory-developed, highly efficient catalysts and industrial applications regarding catalyst structural design, surface chemistry, and catalyst-electrode interplay, outlining the development roadmap of hierarchically structured electrode-based water electrolysis for minimizing energy loss in electrocatalysts for water splitting.

Gas-Phase-Induced Engineering for Fabrication of 3D Hierarchical Porous Nickel and Its Application toward High-Performance Supercapacitors

Commercial nickel foam (NF), which is composed of numerous interconnected ligaments and hundred-micron pores, is widely acknowledged as a current collector/electrode material for catalysis, sensing, and energy storage applications. However, the commonly used NF often does not work satisfactorily due to its smooth surface and hollow structure of the ligaments. Herein, a gas-phase-induced engineering, two-step gaseous oxidation-reduction (GOR) is presented to directly transform the thin-walled hollow ligament of NF into a three-dimensional (3D) nanoporous prism structure, resulting in the fabrication of a unique hierarchical porous nickel foam (HPNF). This 3D nanoporous architecture is achieved by utilizing the spontaneous reconstruction of nickel atoms during volume expansion and contraction in the GOR process. The process avoids the involution of acid-base corrosion and sacrificial components, which are facile, environmentally friendly, and suitable for large-scale fabrication. Furthermore, MnO2 is electrochemically deposited on the HPNF to form a supercapacitor electrode (HPNF/MnO2). Because of the fully open structure for ion transport, superhydrophilic properties, and the increased contact area between MnO2 and the current collector, the HPNF/MnO2 electrode exhibits a high specific capacitance of 997.5 F g-1 at 3 A g-1 and remarkable cycling stability with 99.6% capacitance retention after 20000 cycles in 0.1 M Na2SO4 electrolyte, outperforming most MnO2-based supercapacitor electrodes.

Precious Metal Free Hydrogen Evolution Catalyst Design and Application

The quest to identify precious metal free hydrogen evolution reaction catalysts has received unprecedented attention in the past decade. In this Review, we focus our attention to recent developments in precious metal free hydrogen evolution reactions in acidic and alkaline electrolyte owing to their relevance to commercial and near-commercial low-temperature electrolyzers. We provide a detailed review and critical analysis of catalyst activity and stability performance measurements and metrics commonly deployed in the literature, as well as review best practices for experimental measurements (both in half-cell three-electrode configurations and in two-electrode device testing). In particular, we discuss the transition from laboratory-scale hydrogen evolution reaction (HER) catalyst measurements to those in single cells, which is a critical aspect crucial for scaling up from laboratory to industrial settings but often overlooked. Furthermore, we review the numerous catalyst design strategies deployed across the precious metal free HER literature. Subsequently, we showcase some of the most commonly investigated families of precious metal free HER catalysts; molybdenum disulfide-based, transition metal phosphides, and transition metal carbides for acidic electrolyte; nickel molybdenum and transition metal phosphides for alkaline. This includes a comprehensive analysis comparing the HER activity between several families of materials highlighting the recent stagnation with regards to enhancing the intrinsic activity of precious metal free hydrogen evolution reaction catalysts. Finally, we summarize future directions and provide recommendations for the field in this area of electrocatalysis.

Enabling Internal Electric Field in Heterogeneous Nanosheets to Significantly Accelerate Alkaline Hydrogen Electrocatalysis

Efficient bifunctional hydrogen electrocatalysis, encompassing both hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR), is of paramount significance in advancing hydrogen-based societies. While non-precious-metal-based catalysts, particularly those based on nickel (Ni), are essential for alkaline HER/HOR, their intrinsic catalytic activity often falls short of expectations. Herein, an internal electric field (IEF) strategy is introduced for the engineering of heterogeneous nickel-vanadium oxide nanosheet arrays grown on porous nickel foam (Ni-V2O3/PNF) as bifunctional electrocatalysts for hydrogen electrocatalysis. Strikingly, the Ni-V2O3/PNF delivers 10 mA cm-2 at an overpotential of 54 mV for HER and a mass-specific kinetic current of 19.3 A g-1 at an overpotential of 50 mV for HOR, placing it on par with the benchmark 20% Pt/C, while exhibiting enhanced stability in alkaline electrolytes. Density functional theory calculations, in conjunction with experimental characterizations, unveil that the interface IEF effect fosters asymmetrical charge distributions, which results in more thermoneutral hydrogen adsorption Gibbs free energy on the electron-deficient Ni side, thus elevating the overall efficiency of both HER and HOR. The discoveries reported herein guidance are provided for further understanding and designing efficient non-precious-metal-based electrocatalysts through the IEF strategy.

Bioinspired Gas Manipulation for Regulating Multiphase Interactions in Electrochemistry

The manipulation of gas in multiphase interactions plays a crucial role in various electrochemical processes. Inspired by nature, researchers have explored bioinspired strategies for regulating these interactions, leading to remarkable advancements in design, mechanism, and applications. This paper provides a comprehensive overview of bioinspired gas manipulation in electrochemistry. It traces the evolution of gas manipulation in gas-involving electrochemical reactions, highlighting the key milestones and breakthroughs achieved thus far. The paper then delves into the design principles and underlying mechanisms of superaerophobic and (super)aerophilic electrodes, as well as asymmetric electrodes. Furthermore, the applications of bioinspired gas manipulation in hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO2RR), and other gas-involving electrochemical reactions are summarized. The promising prospects and future directions in advancing multiphase interactions through gas manipulation are also discussed.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Fe(OH)x modified ultra-small Ru nanoparticles for highly efficient hydrogen evolution reaction and its application in water splitting

Developing highly active electrocatalysts for overall water splitting is of remarkable significance for industrial production of H2. Herein, exceptionally active Fe(OH)x modified ultra-small Ru nanoparticles on Ni(OH)2 nanosheets array (Fe(OH)x-Ru/Ni(OH)2) for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are reported. The Fe(OH)x-Ru/Ni(OH)2 nanosheets array prepared with Fe/Ru molar ratio of 5 only requires extremely low overpotentials of 61, 127 and 170 mV to reach current densities of 100, 500 and 800 mA cm-2 in 1 M KOH, respectively, exceeding Pt/C catalyst (75, 160 and 177 mV). Meanwhile, the Fe(OH)x/Ni(OH)2 nanosheets array derived from Fe(OH)x-Ru/Ni(OH)2 exhibits excellent OER activity. It gains current densities of 100, 500 and 800 mA cm-2 at considerably low overpotentials of 265, 285 and 296 mV, respectively, much lower than those of RuO2 and most reported electrocatalysts. The introduction of Fe(OH)x significantly improves the HER activity of Ru nanoparticles by tunning the electronic structure and forming interfaces between Ru and Fe(OH)x. Dramatically, the integrated alkaline electrolyzer based on Fe(OH)x-Ru/Ni(OH)2 and Fe(OH)x/Ni(OH)2 nanosheets array pair just needs 1.649 V to yield a current density up to 500 mA cm-2, exceeding most reported water-splitting electrocatalysts. The strategy reported in this work can be facilely extended to prepare other similar Ru based materials and their derivatives with outstanding catalytic performance for water splitting.

Tetra-Coordinated W2 S3 for Efficient Dual-pH Hydrogen Production

Two-dimensional (2D) transition-metal dichalcogenides (TMDs) have emerged as promising catalysts for the hydrogen evolution reaction (HER) that play a crucial role in renewable energy technologies. Breaking the inherent structural paradigm limitations of 2D TMDs is the key to exploring their fascinating physical and chemical properties, which is expected to develop a revolutionary HER catalyst. Herein, we unambiguously present metallic W2 S3 instead of energetically favorable WS2 via a unique stoichiometric growth strategy. Benefiting from the excellent conductivity and hydrophilicity of the tetra-coordinated structure, as well as an appropriate Gibbs free energy value and an enough low energy barrier for water dissociation, the W2 S3 as catalyst achieves Pt-like HER activity and high long-term stability in both acidic and alkaline electrolytes. For application in proton exchange membrane (PEM) and anion exchange membrane (AEM) electrolysers, W2 S3 as the cathode catalyst yields excellent bifunctionality index (ɳ@ 1 A cm - 2 , PEM ${_{{\rm{@1 {\rm A} cm}}^{{\rm{ - }}{\rm{2}}} {\rm{, PEM}}} }$ =1.73 V, ɳ@ 1 A cm - 2 , AEM ${_{{\rm{@1 {\rm A} cm}}^{{\rm{ - }}{\rm{2}}} {\rm{, AEM}}} }$ =1.77 V) and long-term stability (471 h@PEM with a decay rate of 85.7 μV h-1 , 360 h@AEM with a decay rate of 27.1 μV h-1 ). Our work provides significant insight into the tetra-coordinated W2 S3 and facilitates the development of advanced electrocatalysts for sustainable hydrogen production.

Superhydrophilicity Regulation of Carbon Nanotubes Boosting Electrochemical Biosensing for Real-time Monitoring of H2O2 Released from Living Cells

Dynamic and accurate monitoring of cell-released electroactive signaling biomolecules through electrochemical techniques has drawn significant research interest for clinical applications. Herein, the functionalized carbon nanotubes (f-CNTs) featuring with gradient surface wettability from hydrophobicity to hydrophilicity, and even to superhydrophilicity, were regulated by thermolysis of an ionic liquid for exploration of the dependence of surface wettability on electrochemical biosensing performance to a cell secretion model of hydrogen peroxide (H2O2). The superhydrophilic f-CNTs demonstrated boosting electrocatalytic reduction activity for H2O2. Additionally, the molecular dynamic (MD) simulations confirmed the more cumulative number density distribution of H2O2 molecules closer to the superhydrophilic surface (0.20 vs 0.37 nm), which would provide a faster diffusional channel compared with the hydrophobic surface. Thereafter, a superhydrophilic biosensing platform with a lower detectable limit reduced by 200 times (0.5 vs 100 μM) and a higher sensitivity over 56 times (0.112 vs 0.002 μA μM cm-2) than that of the hydrophobic one was achieved. Given its excellent cytocompatibility, the superhydrophilic f-CNTs was successfully applied to determine H2O2 released from HeLa cells which were maintained alive after a 30 min real-time monitoring test. The surface hydrophilicity regulation of electrode materials presents a facile approach for real-time monitoring of H2O2 released from living cells and would provide new insights for other electroactive signaling targets at the cellular level.

Bubble Management for Electrolytic Water Splitting by Surface Engineering: A Review

During electrocatalytic water splitting, the management of bubbles possesses great importance to reduce the overpotential and improve the stability of the electrode. Bubble evolution is accomplished by nucleation, growth, and detachment. The expanding nucleation sites, decreasing bubble size, and timely detachment of bubbles from the electrode surface are key factors in bubble management. Recently, the surface engineering of electrodes has emerged as a promising strategy for bubble management in practical water splitting due to its reliability and efficiency. In this review, we start with a discussion of the bubble behavior on the electrodes during water splitting. Then we summarize recent progress in the management of bubbles from the perspective of surface physical (electrocatalytic surface morphology) and surface chemical (surface composition) considerations, focusing on the surface texture design, three-dimensional construction, wettability coating technology, and functional group modification. Finally, we present the principles of bubble management, followed by an insightful perspective and critical challenges for further development.

Synergistic modulation in a triphasic Ni5P4-Ni2P@Ni3S2 system manifests remarkable overall water splitting

The potential for water splitting electrocatalysts with high efficiency paves the way for a sustainable future in hydrogen energy. However, this task is challenging due to the sluggish kinetics of the oxygen evolution reaction (OER), which has a significant impact on the hydrogen evolution reaction (HER). Herein multi-heterointerface of Ni5P4-Ni2P@Ni3S2 was fabricated by a two-step synthesis procedure that consist the development of Ni5P4-Ni2P nanosheets over nickel foam followed by the electrodeposition of Ni3S2. The HR-TEM analysis shows that the Ni5P4-Ni2P@Ni3S2 nanosheets array provide numerous well-exposed diverse heterointerfaces. The electrochemical investigations conducted on the Ni5P4-Ni2P@Ni3S2 nanosheets for complete water splitting indicate that they possess an overpotential of 73 mV and 230 mV in HER and OER respectively, enabling them to generate a current density of 10 and 50 mA cm-2. The nanosheets also demonstrate Tafel slope values of 95 mV dec-1 and 83 mV dec-1 for HER and OER, respectively. The HER stability of the catalyst was conducted for 45 h using chronoamperometric technique under a current density of 20 mA cm-1, while the stability test for OER was carried out at current densities of 100 and 200 mA cm-1 for 100 h each. Furthermore, in the overall water splitting, the catalyst exhibits a cell voltage of 1.47 V@10 mA cm-2 and displayed a stability operation for 100 h at a current density of 150 mA cm-1.

Self-activated superhydrophilic green ZnIn2S4 realizing solar-driven overall water splitting: close-to-unity stability for a full daytime

Engineering an efficient semiconductor to sustainably produce green hydrogen via solar-driven water splitting is one of the cutting-edge strategies for carbon-neutral energy ecosystem. Herein, a superhydrophilic green hollow ZnIn2S4 (gZIS) was fabricated to realize unassisted photocatalytic overall water splitting. The hollow hierarchical framework benefits exposure of intrinsically active facets and activates inert basal planes. The superhydrophilic nature of gZIS promotes intense surface water molecule interactions. The presence of vacancies within gZIS facilitates photon energy utilization and charge transfer. Systematic theoretical computations signify the defect-induced charge redistribution of gZIS enhancing water activation and reducing surface kinetic barriers. Ultimately, the gZIS could drive photocatalytic pure water splitting by retaining close-to-unity stability for a full daytime reaction with performance comparable to other complex sulfide-based materials. This work reports a self-activated, single-component cocatalyst-free gZIS with great exploration value, potentially providing a state-of-the-art design and innovative aperture for efficient solar-driven hydrogen production to achieve carbon-neutrality.

A low-cost and efficient route for large-scale synthesis of NiCoSx nanosheets with abundant sulfur vacancies towards quasi-industrial electrocatalytic oxygen evolution

Transition-metal sulfides (TMS) have piqued a great deal of interest due to their unprecious nature and high intrinsic catalytic activity for water splitting. In this work, a low-cost and efficient route was developed, which included electrodeposition to prepare Ni-Co layered double hydroxide (NiCo-LDH) followed by ion exchange to form nickel cobalt sulfide (NiCoSx). Electrochemical reduction was used to modulate sulfur vacancies in order to produce sulfur vacancies-rich NiCoSx with nanosheet arrays on -three-dimensional nickel foam (NiCoSx-0.4/NF) with a large area of more than 250 cm2. Combining data from experiments and density functional theoretical (DFT) calculations reveals that engineered sulfur vacancies change the electronic structure, electron transfer property, and surface electron density of NiCoSx, significantly improving the free energy of water adsorption and boosting electrocatalytic activity. The developed NiCoSx-0.4/NF has long-term stability of more than 300 h at 500 mA cm-2 in 1 M KOH at ambient temperature and only needs a 289 mV overpotential at 100 mA cm-2. Remarkably, the synthesized electrocatalyst rich in sulfur vacancies, exhibits exceptional performance with a high current density of up to 1.9 A cm-2 and 1 A cm-2 in 6 M KOH and leads to overpotentials of 286 mV at 80 °C and 358 mV at 60 °C, respectively. The catalyst's practicability under quasi-industrial conditions (60 °C, 6 M KOH) is further demonstrated by its long-term stability for 220 h with only a 3.9 % potential increase at 500 mA cm-2.

Recent Advances in Co-Based Electrocatalysts for Hydrogen Evolution Reaction

Water splitting is a promising technique in the sustainable "green hydrogen" generation to meet energy demands of modern society. Its industrial application is heavily dependent on the development of novel catalysts with high performance and low cost for hydrogen evolution reaction (HER). As a typical non-precious metal, cobalt-based catalysts have gained tremendous attention in recent years and shown a great prospect of commercialization. However, the complexity of the composition and structure of newly-developed Co-based catalysts make it urgent to comprehensively retrospect and summarize their advance and design strategies. Hence, in this review, the reaction mechanism of HER is first introduced and the possible role of the Co component during electrocatalysis is discussed. Then, various design strategies that could effectively enhance the intrinsic activity are summarized, including surface vacancy engineering, heteroatom doping, phase engineering, facet regulation, heterostructure construction, and the support effect. The recent progress of the advanced Co-based HER electrocatalysts is discussed, emphasizing that the application of the above design strategies can significantly improve performance by regulating the electronic structure and optimizing the binding energy to the crucial intermediates. At last, the prospects and challenges of Co-based catalysts are shown according to the viewpoint from fundamental explorations to industrial applications.

The Secret of Nanoarrays toward Efficient Electrochemical Water Splitting: A Vision of Self-Dynamic Electrolyte

Nanoarray electrocatalysts with unique advantage of facilitating gas bubble detachment have garnered significant interest in gas evolution reactions (GERs). Existing research is largely based on a static hypothesis, assuming that buoyancy is the only driving force for the release of bubbles during GERs. However, this hypothesis overlooks the effect of the self-dynamic electrolyte flow, which is induced by the release of mature bubbles and helps destabilize and release the smaller, immature bubbles nearby. Herein, the enhancing effect of self-dynamic electrolyte flow on nanoarray structures is examined. Phase-field simulations demonstrate that the flow field of electrode with arrayed surface focuses shear force directly onto the gas bubble for efficient detachment, due to the flow could pass through voids and channels to bypass the shielding effect. The flow field therefore has a more substantial impact on the arrayed surface than the nanoscale smooth surface in terms of reducing the critical bubble size. To validate this, superaerophobic ferrous-nickel sulfide nanoarrays are fabricated and employed for water splitting, which display improved efficiency for GERs. This study contributes to understanding the influence of self-dynamic electrolyte on GERs and emphasizes that it should be considered when designing and evaluating nanoarray electrocatalysts.

Open-Microcolumn Array: A Novel Approach for Enhanced Electrocatalytic Bubble Desorption in Microreactors

High-efficiency electrocatalytic water splitting requires high intrinsic activity of catalysts and even more importantly favorable mass transfer. However, gas bubbles adhering to the surface of catalysts limit the re-expose of catalytic active sites to the electrolyte and reduce the catalytic activities. The efficient desorption of bubbles can be facilitated by a hierarchical multiscale structure of the electrode surface. Herein, we report an opened periodic three-dimensional electrode composed of iron (Fe)-cobalt (Co)-nickel (Ni) (oxy)hydroxide nanorods (NRs) grown in situ on a high aspect ratio nickel microcolumn array (NCA) for electrocatalytic water splitting. Compared with the flat nickel plate, the NCA not only increases the surface area for catalyst loading but also improves the wettability of the electrolyte on the electrode surface, exhibiting superhydrophilicity/superaerophobicity (the electrolyte and the bubble contact angles were about ∼0 and 163°, respectively), which accelerates the bubble evolution and desorption process. The X-ray photoelectron spectroscopy indicates that the synergy of Fe-Co-Ni could enhance the ratio of Co3+/Co2+ and Ni3+/Ni2+ and promote the electrocatalytic activity. Benefiting from the microstructure design and synergistic effects, the Co4Fe0.5Ni0.5OOH-NR@NCA electrode achieves a superior OER performance with an overpotential of 199 mV at 10 mA·cm-2.

Optimizing the Spatial Density of Single Co Sites via Molecular Spacing for Facilitating Sustainable Water Oxidation

Advances in single-atom (-site) catalysts (SACs) provide a new solution of atomic economy and accuracy for designing efficient electrocatalysts. In addition to a precise local coordination environment, controllable spatial active structure and tolerance under harsh operating conditions remain great challenges in the development of SACs. Here, we show a series of molecule-spaced SACs (msSACs) using different acid anhydrides to regulate the spatial density of discrete metal phthalocyanines with single Co sites, which significantly improve the effective active-site numbers and mass transfer, enabling one of the msSACs connected by pyromellitic dianhydride to exhibit an outstanding mass activity of (1.63 ± 0.01) × 105 A·g-1 and TOFbulk of 27.66 ± 1.59 s-1 at 1.58 V (vs RHE) and long-term durability at an ultrahigh current density of 2.0 A·cm-2 under industrial conditions for oxygen evolution reaction. This study demonstrates that the accessible spatial density of single atom sites can be another important parameter to enhance the overall performance of catalysts.

Interlayer-Confined NiFe Dual Atoms within MoS2 Electrocatalyst for Ultra-Efficient Acidic Overall Water Splitting

Confining dual atoms (DAs) within the van der Waals gap of 2D layered materials is expected to expedite the kinetic and energetic strength in catalytic process, yet is a huge challenge in atomic-scale precise assembling DAs within two adjacent layers in the 2D limit. Here, an ingenious approach is proposed to assemble DAs of Ni and Fe into the interlayer of MoS2 . While inheriting the exceptional merits of diatomic species, this interlayer-confined structure arms itself with confinement effect, displaying the more favorable adsorption strength on the confined metal active center and higher catalytic activity towards acidic water splitting, as verified by intensive research efforts of theoretical calculations and experimental measurements. Moreover, the interlayer-confined structure also renders metal DAs a protective shelter to survive in harsh acidic environment. The findings embodied the confinement effects at the atom level, and interlayer-confined assembling of multiple species highlights a general pathway to advance interlayer-confined DAs catalysts within various 2D materials.

Engineering iron carbide catalyst with aerophilic and electron-rich surface for improved electrochemical CO2 reduction

Highly efficient electrocatalyst for carbon dioxide reduction (CO₂RR) is desirable for converting CO₂ into carbon-based chemicals and reducing anthropogenic carbon emission. Regulating catalyst surface to improve the affinity for CO₂ and the capability of CO₂ activation is the key to high-efficiency CO₂RR. In this work, we develop an iron carbide catalyst encapsulated in nitrogenated carbon (SeN-Fe₃C) with an aerophilic and electron-rich surface by inducing preferential formation of pyridinic-N species and engineering more negatively charged Fe sites. The SeN-Fe₃C exhibits an excellent CO selectivity with a CO Faradaic efficiency (FE) of 92 % at -0.5 V (vs. RHE) and remarkably enhanced CO partial current density as compared to the N-Fe₃C catalyst. Our results demonstrate that Se doping reduces the Fe₃C particle size and improves the dispersion of Fe₃C on nitrogenated carbon. More importantly, the preferential formation of pyridinic-N species induced by Se doping endows the SeN-Fe₃C with an aerophilic surface and improves the affinity of the SeN-Fe₃C for CO₂. Density functional theory (DFT) calculations reveal that the electron-rich surface, which is caused by pyridinic N species and much more negatively charged Fe sites, leads to a high degree of polarization and activation of CO₂ molecule, thus conferring a remarkably improved CO₂RR activity on the SeN-Fe₃C catalyst.

Key Roles of Interfacial OH- ion Distribution on Proton Coupled Electron Transfer Kinetics Toward Urea Oxidation Reaction

Enhancing alkaline urea oxidation reaction (UOR) activity is essential to upgrade renewable electrolysis systems. As a core step of UOR, proton-coupled electron transfer (PCET) determines the overall performance, and accelerating its kinetic remains a challenge. In this work, a newly raised electrocatalyst of NiCoMoCuO_x H_y with derived multi-metal co-doping (oxy)hydroxide species during electrochemical oxidation states is reported, which ensures considerable alkaline UOR activity (10/500 mA cm^-2 at 1.32/1.52 V vs RHE, respectively). Impressively, comprehensive studies elucidate the correlation between the electrode-electrolyte interfacial microenvironment and the electrocatalytic urea oxidation behavior. Specifically, NiCoMoCuO_x H_y featured with dendritic nanostructure creates a strengthened electric field distribution. This structural factor prompts the local OH^- enrichment in electrical double layer (EDL), so that the dehydrogenative oxidation of the catalyst is directly reinforced to facilitate the subsequent PCET kinetics of nucleophilic urea, resulting in high UOR performance. In practical utilization, NiCoMoCuO_x H_y -driven UOR coupled cathodic hydrogen evolution reaction (HER) and carbon dioxide reduction reaction (CO₂ RR), and harvested high value-added products of H₂ and C₂ H₄ , respectively. This work clarifies a novel mechanism to improve electrocatalytic UOR performance through structure-induced interfacial microenvironment modulation.

Electrolyte-Wettability Issues and Challenges of Electrode Materials in Electrochemical Energy Storage, Energy Conversion, and Beyond

The electrolyte-wettability of electrode materials in liquid electrolytes plays a crucial role in electrochemical energy storage, conversion systems, and beyond relied on interface electrochemical process. However, most electrode materials do not have satisfactory electrolyte-wettability for possibly electrochemical reaction. In the last 30 years, there are a lot of literature have directed at exploiting methods to improve electrolyte-wettability of electrodes, understanding basic electrolyte-wettability mechanisms of electrode materials, exploring the effect of electrolyte-wettability on its electrochemical energy storage, conversion, and beyond performance. This review systematically and comprehensively evaluates the effect of electrolyte-wettability on electrochemical energy storage performance of the electrode materials used in supercapacitors, metal ion batteries, and metal-based batteries, electrochemical energy conversion performance of the electrode materials used in fuel cells and electrochemical water splitting systems, as well as capacitive deionization performance of the electrode materials used in capacitive deionization systems. Finally, the challenges in approaches for improving electrolyte-wettability of electrode materials, characterization techniques of electrolyte-wettability, as well as electrolyte-wettability of electrode materials applied in special environment and other electrochemical systems with electrodes and liquid electrolytes, which gives future possible directions for constructing interesting electrolyte-wettability to meet the demand of high electrochemical performance, are also discussed.

Kirkendall effect Strengthened-Superhydrophilic/superaerophobic Co-Ni3N/NF heterostructure as electrode catalyst for High-current hydrogen production

The development of efficient electrocatalysts for large-scale water electrolysis is crucial and challenging. Research efforts towards interface engineering and electronic structure modulation can be leveraged to enhance the electrochemical performance of the developed catalysts. In this work, a surface-engineered Co-Ni₃N/NF heterostructure electrode was prepared based on Kirkendall effect for high-current water electrolysis. In the experiments, the textural feature and intrinsic activity of the Co-Ni₃N/NF heterostructure were tuned through cobalt-doping and the creation of structural defects. As a result, the increased surface energy endowed Co-Ni₃N/NF heterostructure with superhydrophilic and superaerophobic properties. Meanwhile, the contact area of the gas-liquid-solid three phases was optimized. With a large underwater bubble contact angle (CA) of 169°, the electrolyte solution can infiltrate the Co-Ni₃N/NF electrode within 150 ms. Sequentially, the generated gas bubbles were able to detach at high frequency, which ensured the rapid mass exchange. The performance tests showed that the optimal Co-Ni₃N/NF electrode sample reached current densities of 100 mA cm^-2 and 500 mA cm^-2 at the overpotentials of 98 mV and 123 mV, respectively. Benefiting from the reduction of hydrogen embrittlement, the HER performance of the prepared Co-Ni₃N/NF electrode sample decreased slightly after 100 h durability test, but the overall structure remained well. Those results allowed us to conclude that the prepared Co-Ni₃N/NF electrocatalyst holds the promises for large-scale water electrolysis in industries. More specifically, this work provided a new perspective that the efficiency of electrocatalysts for large-scale water electrolysis can be enhanced by constructing a heterostructure with good wettability and gas repellency.

Superwettable and photothermal all-in-one electrocatalyst for boosting water/urea electrolysis

Developing multifunctional all-in-one electrocatalysts for energy-saving hydrogen generation remains a challenge. In this study, a simple and feasible thermal phosphorization strategy is explored to rationally construct P-doped MoO₂-NiMoO₄ heterostructure on nickel foam (NF). The heterointerfaced P-MoO₂-NiMoO₄/NF can simultaneously realize the integrated all-in-one functionalities, innovatively introducing superwettable surfaces, photothermal conversion capabilities and electrocatalytic functions. The superwettability gives P-MoO₂-NiMoO₄/NF sufficient electrolyte permeation and smooth bubble detachment. The plasmonic MoO₂ with photothermal performance greatly elevates the local surface temperature of in P-MoO₂-NiMoO₄/NF, which is conducive to improve the electrocatalytic efficiency. The favorable in-situ surface reconstruction brings abundant active sites for electrocatalytic reactions. As an advanced multifunctional electrocatalyst, the superwettable and photothermal P-MoO₂-NiMoO₄/NF exhibits significantly improved performances in oxygen evolution reaction (OER) and urea oxidation reaction (UOR). More importantly, the highly efficient and stable overall water-urea electrolysis assisted by photothermal fields can be simply achieved by exposing P-MoO₂-NiMoO₄/NF to near-infrared (NIR) light.

Regulating electronic states of nitride/hydroxide to accelerate kinetics for oxygen evolution at large current density

Rational design efficient transition metal-based electrocatalysts for oxygen evolution reaction (OER) is critical for water splitting. However, industrial water-alkali electrolysis requires large current densities at low overpotentials, always limited by intrinsic activity. Herein, we report hierarchical bimetal nitride/hydroxide (NiMoN/NiFe LDH) array as model catalyst, regulating the electronic states and tracking the relationship of structure-activity. As-activated NiMoN/NiFe LDH exhibits the industrially required current density of 1000 mA cm^-2 at overpotential of 266 mV with 250 h stability for OER. Especially, in-situ electrochemical spectroscopic reveals that heterointerface facilitates dynamic structure evolution to optimize electronic structure. Operando electrochemical impedance spectroscopy implies accelerated OER kinetics and intermediate evolution due to fast charge transport. The OER mechanism is revealed by the combination of theoretical and experimental studies, indicating as-activated NiMoN/NiFe LDH follows lattice oxygen oxidation mechanism with accelerated kinetics. This work paves an avenue to develop efficient catalysts for industrial water electrolysis via tuning electronic states.

Hybrid Heterostructure Ni3 N|NiFeP/FF Self-Supporting Electrode for High-Current-Density Alkaline Water Electrolysis

Exploring earth-abundant and efficient electrocatalysts for oxygen evolution reaction (OER) is an urgent need and significant to water electrolysis. Although great achievements have been made, it is still challenging to achieve industrial current density and stability. Herein, a hybrid heterostructure electrode based on Ni₃ N and NiFeP over Fe foam substrate (Ni₃ N|NiFeP/FF) is reported, along with 3D-interconnected hierarchical porous architecture, achieving the low overpotentials of 287, 178, and 290 mV at 500 mA cm^-2 in 1 m KOH, 30 wt% KOH, and alkaline simulated seawater, respectively, with excellent durability at 800 mA cm^-2 over 120 h, which can satisfy the requirements of industrial water electrolysis. Here, the hybrid heterostructure can ensure the low energy barrier of the catalytic active sites, the 3D-interconnected hierarchical porous architecture can facilitate the fast mass/ions/electrons transformation, which contributes together to boost the superb water splitting performance. Furthermore, the COMSOL simulations confirm the multiple merits of the designed electrode during the water electrocatalysis. The present work provides a new strategy in the design and engineering of high-performance electrodes for industrial water electrolysis.

Rational Synthesis of Core-Shell-Structured Nickel Sulfide-Based Nanostructures for Efficient Seawater Electrolysis

Versatile electrocatalysis at higher current densities for natural seawater splitting to produce hydrogen demands active and robust catalysts to overcome the severe chloride corrosion, competing chlorine evolution, and catalyst poisoning. Hereto, the core-shell-structured heterostructures composed of amorphous NiFe hydroxide layer capped Ni₃ S₂ nanopyramids which are directly grown on nickel foam skeleton (NiS@LDH/NF) are rationally prepared to regulate cooperatively electronic structure and mass transport for boosting oxygen evolution reaction (OER) performance at larger current densities. The prepared NiS@LDH/NF delivers the anodic current density of 1000 mA cm^-2 at the overpotential of 341 mV in 1.0 m KOH seawater. The feasible surface reconstruction of Ni₃ S₂ -FeNi LDH interfaces improves the chemical stability and corrosion resistance, ensuring the robust electrocatalytic activity in seawater electrolytes for continuous and stable oxygen evolution without any hypochlorite production. Meanwhile, the designed Ni₃ S₂ nanopyramids coated with FeNi₂ P layer (NiS@FeNiP/NF) still exhibit the improved hydrogen evolution reaction (HER) activity in 1.0 m KOH seawater. Furthermore, the NiS@FeNiP/NF||NiS@LDH/NF pair requires cell voltage of 1.636 V to attain 100 mA cm^-2 with a 100% Faradaic efficiency, exhibiting tremendous potential for hydrogen production from seawater.

Exploring the Sub-nanoscale Structure of Cobalt Molybdenum Sulfide and the Role of a Cobalt Promoter in Catalytic Hydrogen Evolution

Cobalt-promoted molybdenum sulfide (CoMoS) is known as a promising catalyst for H₂ evolution reaction and hydrogen desulfurization reaction. This material exhibits superior catalytic activity as compared to its pristine molybdenum sulfide counterpart. However, revealing the actual structure of cobalt-promoted molybdenum sulfide as well as the plausible contribution of a cobalt promoter is still challenging, especially when the material has an amorphous nature. Herein, we report, for the first time, on the use of positron annihilation spectroscopy (PAS), being a nondestructive nuclear radiation-based method, to visualize the position of a Co promoter within the structure of MoS at the atomic scale, which is inaccessible by conventional characterization tools. It is found that at low concentrations, a Co atom occupies preferably the Mo-vacancies, thus generating the ternary phase CoMoS whose structure is composed of a Co-S-Mo building block. Increasing the Co concentration, e.g., a Co/Mo molar ratio of higher than 1.12/1, leads to the occupation of both Mo-vacancies and S-vacancies by Co. In this case, secondary phases such as MoS and CoS are also produced together with the CoMoS one. Combining the PAS and electrochemical analyses, we highlight the important contribution of a Co promoter to enhancing the catalytic H₂ evolution activity. Having more Co promoter in the Mo-vacancies promotes the H₂ evolution rate, whereas having Co in the S-vacancies causes a drop in H₂ evolution ability. Furthermore, the occupation of Co to the S-vacancies leads also to the destabilization of the CoMoS catalyst, resulting in a rapid degradation of catalytic activity.

Surfactant Improved Interface Morphology and Mass Transfer for Electrochemical Oxygen-Evolving Reaction

The surface microstructure of a catalyst coating layer directly affects the active area, hydrophilicity and hydrophobicity, and the high porosity is desirable especially for solid–liquid–gas three-phase catalytic reactions. However, it remains challenging to customize catalyst distribution during the coating process. Here, we report a simple strategy for achieving ultrafine nanocatalyst deposition in a porous structure via introducing the surfactant into coating inks. For a proof-of-concept demonstration, we spin-coated the nanoscale IrO2 sol with a surfactant of sodium dodecyl sulfate (SDS) onto the glassy carbon (GC) electrode for oxygen evolution reaction (OER). Due to the surfactant action, the deposited IrO2 nanocatalyst is evenly distributed and interconnected into a highly porous overlayer, which facilitates electrolyte permeation, gas bubble elimination and active-site accessibility, thus affording high-performance OER in alkaline media. Particularly, the SDS-modified electrodes enable the industrial-level high-current-density performance via enhanced mass transfer kinetics. Such manipulation is effective to improve the coating electrodes’ catalytic activity and stability, and scalable for practical applications and suggestive for other gas-evolving electrodes.

A salt-baking 'recipe' of commercial nickel-molybdenum alloy foam for oxygen evolution catalysis in water splitting

Ni-based metal foam holds promise as an electrochemical water-splitting catalyst, due to its low cost, acceptable catalytic activity and superior stability. However, its catalytic activity must be improved before it can be used as an energy-saving catalyst. Here, a traditional Chinese recipe, salt-baking, was employed to surface engineering of nickel-molybdenum alloy (NiMo) foam. During salt-baking, a thin layer of FeOOH nano-flowers was assembled on the NiMo foam surface then the resultant NiMo-Fe catalytic material was evaluated for its ability to support oxygen evolution reaction (OER) activity. The NiMo-Fe foam catalyst generated an electric current density of 100 mA cm^-2 that required an overpotential of only 280 mV, thus demonstrating that its performance far exceeded that of the benchmark catalyst RuO₂ (375 mV). When employed as both the anode and cathode for use in alkaline water electrolysis, the NiMo-Fe foam generated a current density (j) output that was 3.5 times greater than that of NiMo. Thus, our proposed salt-baking method is a promising simple and environmentally friendly approach for surface engineering of metal foam for designing catalysts.

Electronic redistribution over the active sites of NiWO4-NiO induces collegial enhancement in hydrogen evolution reaction in alkaline medium

The activity-enhancement of a new-generation catalyst focuses on the collegial approach among specific solids which exploit the mutual coactions of these materials for HER applications. Strategic manipulation of these solid interfaces typically reveals unique electronic states different from their pure phases, thus, providing a potential passage to create catalysts with excellent activity and stability. Herein, the formation of the NiWO₄-NiO interface has been designed and synthesized via a three-step method. This strategy enhances the chance of the formation of abundant heterointerfaces due to the fine distribution of NiWO₄ nanoparticles over Ni(OH)₂ sheets. NiWO₄-NiO has superior HER activity in an alkaline (1 M KOH) electrolyte with modest overpotentials of 68 mV at 10 mA cm^-2 current density. The catalyst is highly stable in an alkaline medium and negligible change was observed in the current density even after 100 h of continuous operation. This study explores a unique method for high-performance hydrogen generation by constructing transition metal-oxides heterojunction. The XPS studies reveal an electronic redistribution driven by charge transfer through the NiWO₄-NiO interface. The density functional theory (DFT) calculations show that the NiWO₄-NiO exhibits a Pt-like activity with the hydrogen Gibbs free energy (ΔG_H*) value of 0.06 eV compared to the Pt(ΔG_H* = -0.02 eV).

Recent Advances and Future Perspectives of Metal-Based Electrocatalysts for Overall Electrochemical Water Splitting

Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H₂ ) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H₂ society implementation. Existing massive H₂ output is mostly reliant on the steaming reformation of carbon fuels that yield CO₂ together with H₂ and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H₂ evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H₂ evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H₂ -based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H₂ and oxygen (O₂ ) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.

Biomimicry-inspired fish scale-like Ni3N/FeNi3N/NF superhydrophilic/superaerophobic nanoarrays displaying high electrocatalytic performance

The mass transfer efficiency and structural stability of the electrode are critical for industrialized water electrolysis operations. Herein, the biomimicry-inspired design of Ni₃N/FeNi₃N/NF nanoarrays with a fish scale-like structure, which endowed the Ni₃N/FeNi₃N/NF nanoarrays with rapid infiltration of aqueous solution within 60 ms and 169° bubble contact angle, is demonstrated. The optimal Ni₃N/FeNi₃N/NF sample displayed catalytic activity with hydrogen evolution reaction (HER) overpotentials of only 48 mV at 10 mA cm^-2 and 102 mV at 100 mA cm^-2. Similarly, the overpotential of the anodic-coupled urea oxidation reaction (UOR) was only 1.3 V at 10 mA cm^-2 and 1.35 V at 100 mA cm^-2. Besides, the small impact resulting from the rapid bubble extraction within the Ni₃N/FeNi₃N/NF nanoarrays ensured excellent HER cycling stability over 100 h at a current density of 50 mA cm^-2. The further scale-up experiment suggests the industrialization prospects of the prepared Ni₃N/FeNi₃N/NF electrocatalysts.

Highly Efficient All-3D-Printed Electrolyzer toward Ultrastable Water Electrolysis

The practical application of electrochemical water splitting has been plagued by the sluggish kinetics of bubble generation and the slow escape of bubbles which block reaction surfaces at high current densities. Here, 3D-printed Ni (3DP Ni) electrodes with a rationally designed periodic structure and surface chemistry are reported, where the macroscopic ordered pores allow fast bubble evolution and emission, while the microporosity ensures a high electrochemically active surface area (ECSA). When they are further loaded with MoNi₄ and NiFe layered double hydroxide active materials, the 3D electrodes deliver 500 mA cm^-2 at an overpotential of 104 mV for the hydrogen evolution reaction (HER) and 310 mV for the oxygen evolution reaction (OER), respectively. An all-3D-printed alkaline electrolyzer (including electrodes, membrane, and cell) delivers 500 mA cm^-2 at a remarkable voltage of 1.63 V with no noticeable performance decay after 1000 h. Such a tailored bubble trajectory demonstrates feasible solutions for future large-scale clean energy production.

Mild Construction of "Midas Touch" Metal-Organic Framework-Based Catalytic Electrodes for Highly Efficient Overall Seawater Splitting

Mild construction of highly efficient and durable practical electrodes for overall water splitting (OWS) at industrial-grade current density is currently a significant challenge. Herein, metal-organic framework (MOF) materials are grown in situ on the surface of carbon cloth (CC) at 25 °C, and quickly "interspersed" by cobalt-boron (Co-B) via electroless plating for 30 min to obtain a highly efficient and stable CoB@MOF@CC self-supporting electrode. Owing to the large specific surface area, abundant active sites, and porous structure, the MOF-based CC modified by bamboo leaf-like ultrathin CoB has remarkable electrochemical catalysis efficiency. The CoB@MOF@CC electrode exhibits excellent performance during the hydrogen evolution reaction (η₁₀  = 57 mV, η₅₀₀  = 266 mV) and oxygen evolution reaction (η₁₀  = 209 mV, η₅₀₀  = 423 mV) in alkaline simulated seawater, and is durable for 2500 h at 500 mA cm^-2 . The OWS performance is obviously enhanced by employing the prepared electrode, which only requires 1.49 V to achieve 10 mA cm^-2 and is durable for over 360 h at industrial-grade current densities in alkaline high-salt, real seawater, rainwater, and urea electrolytes.

Fabrication of 3D self-supported MoS2-Co-P/nickel foam electrode for adsorption-electrochemical removal of Cr(Ⅵ)

Electrochemistry is considered to be one of the most efficient and environment-friendly methods for removing highly toxic Cr (Ⅵ). In this study, a 3D self-supported MoS₂-Co-P/nickel foam (NF) electrode was prepared via a calcination-hydrothermal process to remove the Cr (Ⅵ) in aqueous medium. Scanning electron microscope (SEM) analysis indicated that the pine-needle-like Co₂P nanoneedle and flower-like MoS₂ nanosheets were successfully loaded on the three-dimensional (3D) framework of NF, which provided abundant active sites. The electrode modified by Co, P and MoS₂ exhibited high removal efficiency of Cr (Ⅵ) (96.9%) at pH 3.0, current of 0.128 mA and voltage of 2.5 V. Co, P and MoS₂ have the synergistic promotion on the catalytic performance of electrodes, and the reduction efficiency of Cr (Ⅵ) was greatly improved by 127.5 times relative to pure NF. The enhanced removal of Cr (Ⅵ) was related to the coupling effect of adsorption and electrocatalytic reduction. The mechanism study indicated that electron (e^-) is the active species of Cr (Ⅵ) reduction. The Cr (Ⅵ) removal rate was maintained at 90 ± 1% after five successive cycle experiments, demonstrating good stability and potential industrial applications of MoS₂-Co-P/NF.

Bioinspired Metalation of the Metal-Organic Framework MIL-125-NH2 for Photocatalytic NADH Regeneration and Gas-Liquid-Solid Three-Phase Enzymatic CO2 Reduction

Coenzyme NADH regeneration is crucial for sustained photoenzymatic catalysis of CO₂ reduction. However, light-driven NADH regeneration still suffers from the low regeneration efficiency and requires the use of a homogeneous Rh complex. Herein, a Rh complex-based electron transfer unit was chemically attached onto the linker of the MIL-125-NH₂ . The coupling between the light-harvesting iminopyridine unit and electron-transferring Rh-complex facilitated the photo-induced electron transfer for the NADH regeneration with the yield of 66.4 % in 60 mins for 5 cycles. The formate dehydrogenase was further deposited onto the hydrophobic layer of the membrane by a reverse filtering technique, which forms the gas-liquid-solid reaction interface around the enzyme site. It gave an enhanced formic acid yield of 9.5 mM in 24 hours coupled with the in situ regenerated NADH. The work could shed light on the construction of integrated inorganic-enzyme hybrid systems for artificial photosynthesis.

A GO/CoMo3S13 chalcogel heterostructure with rich catalytic Mo-S-Co bridge sites for the hydrogen evolution reaction

Molybdenum disulfide (MoS₂)-based materials are extensively studied as promising hydrogen evolution reaction (HER) catalysts. In order to bring out the full potential of chalcogenide chemistry, precise control over the active sulfur sites and enhancement of electronic conductivity need to be achieved. This study develops a highly active HER catalyst with an optimized active site-controlled cobalt molybdenum sulfide (CoMo₃S₁₃) chalcogel/graphene oxide aerogel heterostructure. The highly active CoMo₃S₁₃ chalcogel catalyst was achieved by the synergetic catalytic sites of [Mo₃S₁₃]^2- and the Mo-S-Co bridge. The optimized GO/CoMo₃S₁₃ chalcogel heterostructure catalyst exhibited high catalytic HER performance with an overvoltage of 130 mV, a current density of 10 mA cm^-2, a small Tafel slope of 40.1 mV dec^-1, and remarkable stability after 12 h of testing. This study presents a successful example of a synergistic heterostructure exploiting both the appealing electrical functionality of GO and catalytically active [Mo₃S₁₃]^2- sites.

Construction of NiS/Ni3S4 heteronanorod arrays in graphitized carbonized wood frameworks as versatile catalysts for efficient urea-assisted water splitting

Exploring highly efficient, robust, and stable catalysts for urea electrolysis is intensively desirable for hydrogen production but remains a challenging task. In this work, novel, well-aligned, self-supported NiS/Ni₃S₄ heteronanorod arrays deposited on graphitized carbonized wood (GCW) are designed (denoted as NiS/Ni₃S₄/GCW) and synthesized by a facile hydrothermal sulfidation strategy. Benefitting from the optimized surface hydrophilicity/aerophobicity, enhanced electrical conductivity, and 3D hierarchical directional porous architectures, the NiS/Ni₃S₄/GCW show excellent activity toward the urea oxidation reaction and hydrogen evolution reaction in alkaline electrolytes. The arrays achieved a low potential of 1.33 V (vs. RHE) and 91 mV (overpotential) at 10 mA cm^-2 as well as robust stability for 100 h. Significantly, when employed as anode and cathode simultaneously, the urea electrolyzer constructed by NiS/Ni₃S₄/GCW catalysts merely requires a low voltage of 1.44 V to drive 10 mA cm^-2 with superior stability for 50 h. This work not only demonstrates the application of heterogeneous sulfide for urea-assisted hydrogen production but also provides an effective guideline for using renewable wood for designing efficient catalysts in an economical way.