Unravelling the Synergy between Oxygen Vacancies and Oxygen Substitution in BiO 2− x for Efficient Molecular‐Oxygen Activation

Oxygen vacancies and Y-O-Ag bonds in the Z-scheme heterojunction cooperate to promote photodegradation of organic pollutants

Y2O3 is a cost-effective and environmentally friendly wide-band gap photocatalyst with extensive application potential. However, its limited ability to be excited by visible light restricts its practical uses. In this study, we coupled the narrow bandgap semiconductor AgI with Y2O3 to form a Z-scheme heterostructure, significantly promoting its photocatalytic degradation activity. Characterization and experimental results demonstrated the formation of Y-O-Ag bonds through coupling with AgI, leading to an increase in oxygen vacancies in Y2O3, which promotes the chemisorption of H2O and O2. The Y-O-Ag bond introduction promotes electron transfer, improves hole utilization, and boosts energy transfer efficiency, thus promoting the efficient generation of ·OH and 1O2. The photocatalytic degradation rates of RhB and o-nitrophenol by 7.5% AgI/Y2O3 were 26.5 and 4 times higher than those of pure Y2O3, respectively. This study provides theoretical support for the Z-scheme heterojunction to improve photocatalytic activity and offers efficient solutions and practical design ideas for sewage purification.

The Surface/Interface Modulation of Platinum Group Metal (PGM)-Free Catalysts for VOCs and CO Catalytic Oxidation

Effective management of volatile organic compounds (VOCs) and carbon monoxide (CO) is critical to human health and the ecological environment. Catalytic oxidation is one of the most promising technologies for achieving efficient VOCs and CO emission control. Platinum group metal (PGM)-free catalysts are recently receiving sustainable attention in catalyzing VOCs and CO removal due to their low cost, superior catalytic activity, and excellent stability, but PGM-free catalysts face challenges in low-temperature catalytic efficiency. In this mini-review, starting with discussing the catalytic mechanism of VOCs and CO oxidation, we summarize the surface/interface modulation strategies of PGM-free catalysts to promote oxygen and VOCs/CO molecule activation for enhanced low-temperature oxidation activity, including oxygen vacancy engineering, heteroatom doping, surface acidity modification, and active interface construction. We highlight the currently remaining challenges and prospects of advanced PGM-free catalyst development for highly efficient VOCs and CO emission control in practical applications.

Oxygen-deficient AgIO3 for efficiently photodegrading organic contaminants under natural sunlight

Defect engineering is regarded as an effective strategy to boost the photo-activity of photocatalysts for organic contaminants removal. In this work, abundant surface oxygen vacancies (Ov) are created on AgIO3 microsheets (AgIO3-OV) by a facile and controllable hydrogen chemical reduction approach. The introduction of surface Ov on AgIO3 broadens the photo-absorption region from ultraviolet to visible light, accelerates the photoinduced charges separation and migration, and also activates the formation of superoxide radicals (•O2-). The AgIO3-OV possesses an outstanding degradation rate constant of 0.035 min-1, for photocatalytic degrading methyl orange (MO) under illumination of natural sunlight with a light intensity is 50 mW/cm2, which is 7 and 3.5 times that of the pristine AgIO3 and C-AgIO3 (AgIO3 is calcined in air without generating Ov). In addition, the AgIO3-OV also exhibit considerable photoactivity for degrading other diverse organic contaminants, including azo dye (rhodamine B (RhB)), antibiotics (sulflsoxazole (SOX), norfloxacin (NOR), chlortetracycline hydrochloride (CTC), tetracycline hydrochloride (TC) and ofloxacin (OFX)), and even the mixture of organic contaminants (MO-RhB and CTC-OFX). After natural sunlight illumination for 50 min, 41.4% of total organic carbon (TOC) for MO-RhB mixed solution can be decreased over AgIO3-OV. In a broad range of solution pH from 3 to 11 or diverse water bodies of MO solution, AgIO3-OV exhibits attractive activity for decomposing MO. The MO photo-degradation process and mechanism over AgIO3-OV under natural sunlight irradiation has been systemically investigated and proposed. The toxicities of MO and its degradation intermediates over AgIO3-OV are compared using Toxicity Estimation Software (T.E.S.T.). Moreover, the non-toxicity of both AgIO3-OV catalyst and treated antibiotic solution (CTC-OFX mixture) are confirmed by E. coli DH5a cultivation test, supporting the feasibility of AgIO3-OV catalyst to treat organic contaminants in real water under natural sunlight illumination.

Oxygen-Vacancy-Rich Monolayer BiO2- X Nanosheets for Bacterial Sepsis Management via Dual Physically Antibacterial and Chemically Anti-inflammatory Functions

Sepsis is defined as a life-threatening organ dysfunction caused by a dysregulated host response to infection. Effective treatment of bacterial sepsis remains challenging due to the rapid progression of infection and the systemic inflammatory response. In this study, monolayer BiO2- X nanosheets (BiO2- X NSs) with oxygen-rich vacancies through sonication-assisted liquid-phase exfoliation are successfully synthesized. Herein, the BiO2- X NSs exhibit a novel nanozyme-enabled intervention strategy for the management of bacterial sepsis, based on its pH dependent dual antibacterial and anti-inflammatory functions. BiO2- X NSs exhibit effective antibacterial by utilizing oxidase (OXD)-like activity. Additionally, BiO2- X NSs can scavenge multiple reactive oxygen species (ROS) and mitigate systemic hyperinflammation by mimicking superoxide dismutase (SOD) and catalase (CAT). These dual capabilities of BiO2- X NSs allow them to address bacterial infection, proinflammatory cytokines secretion and ROS burst collaboratively, effectively reversing the progression of bacterial sepsis. In vivo experiments have demonstrated that BiO2- X NSs significantly reduce bacterial burden, attenuate systemic hyperinflammation, and rapidly rescued organ damage. Importantly, no obvious adverse effects are observed at the administered dose of BiO2- X NSs. This study presents a novel defect engineering strategy for the rational design of high-performance nanozymes and development of new nanomedicines for managing bacterial sepsis.

Catalytic Oxidation of Chlorobenzene over Amorphous Manganese-Chromium Catalysts Supported by UiO-66-Derived ZrOx

The development of efficient catalysts with longevity to remove chlorobenzene is challenging due to Cl poisoning. Herein, a series of Mn-Cr/ZrOx catalysts supported by Zr-based metal-organic framework (UiO-66)-derived ZrOx was prepared and investigated for chlorobenzene (CB) catalytic oxidation. MnCr/ZrOx-M prepared via a wet impregnation method presented an amorphous structure, indicating the homogeneous dispersion of Cr and Mn, which improved acid and redox properties. 40Mn7Cr3/ZrOx-M exhibited the best catalytic activity for chlorobenzene oxidation with T90 of 293 °C, which is mainly due to the strong interaction between manganese and chromium promoted by the large specific surface area of the ZrOx support. Furthermore, 40Mn7Cr3/ZrOx-M presented excellent stability for chlorobenzene oxidation.

Boosted Sacrificial-Agent-Free Selective Photoreduction of CO2 to CH3OH by Rhenium Atomically Dispersed on Indium Oxide

Solar-energy-driven photoreduction of CO2 is promising in alleviating environment burden, but suffers from low efficiency and over-reliance on sacrificial agents. Herein, rhenium (Re) is atomically dispersed in In2O3 to fabricate a 2Re-In2O3 photocatalyst. In sacrificial-agent-free photoreduction of CO2 with H2O, 2Re-In2O3 shows a long-term stable efficiency which is enhanced by 3.5 times than that of pure In2O3 and is also higher than those on Au-In2O3, Ag-In2O3, Cu-In2O3, Ir-In2O3, Ru-In2O3, Rh-In2O3 and Pt-In2O3 photocatalysts. Moreover, carbon-based product of the photoreduction overturns from CO on pure In2O3 to CH3OH on 2Re-In2O3. Re promotes charge separation, H2O dissociation and CO2 activation, thus enhancing photoreduction efficiency of CO2 on 2Re-In2O3. During the photoreduction, CO is a key intermediate. CO prefers to desorption rather than hydrogenation on pure In2O3, as CO binds to pure In2O3 very weakly. Re strengthens the interaction of CO with 2Re-In2O3 by 5.0 times, thus limiting CO desorption but enhancing CO hydrogenation to CH3OH. This could be the origin for photoreduction product overturn from CO on pure In2O3 to CH3OH on 2Re-In2O3. The present work opens a new way to boost sacrificial-agent-free photoreduction of CO2.

Enhancement Effect Induced by the Second Metal to Promote Ozone Catalytic Oxidation of VOCs

It is a promising research direction to develop catalysts with high stability and ozone utilization for low-temperature ozone catalytic oxidation of VOCs. While bimetallic catalysts exhibit excellent catalytic activity compared with conventional single noble metal catalysts, limited success has been achieved in the influence of the bimetallic effect on the stability and ozone utilization of metal catalysts. Herein, it is necessary to systematically study the enhancement effect in the ozone catalytic reaction induced by the second metal. With a simple continuous impregnation method, a platinum-cerium bimetallic catalyst is prepared. Also highlighted are studies from several aspects of the contribution of the second metal (Ce) to the stability and ozone utilization of the catalysts, including the "electronic effect" and "geometric effect". The synergistic removal rate of toluene and ozone is nearly 100% at 30 °C, and it still shows positive stability after high humidity and a long reaction time. More importantly, the instructive significance, which is the in-depth knowledge of enhanced catalytic mechanism of bimetallic catalysts resulting from a second metal, is provided by this work.

Graphdiyne/metal oxide hybrid materials for efficient energy and environmental catalysis

Graphdiyne (GDY)-based materials, owing to their unique structure and tunable electronic properties, exhibit great potential in the fields of catalysis, energy, environmental science, and beyond. In particular, GDY/metal oxide hybrid materials (GDY/MOs) have attracted extensive attention in energy and environmental catalysis. The interaction between GDY and metal oxides can increase the number of intrinsic active sites, facilitate charge transfer, and regulate the adsorption and desorption of intermediate species. In this review, we summarize the structure, synthesis, advanced characterization, small molecule activation mechanism and applications of GDY/MOs in energy conversion and environmental remediation. The intrinsic structure-activity relationship and corresponding reaction mechanism are highlighted. In particular, the activation mechanisms of reactant molecules (H2O, O2, N2, etc.) on GDY/MOs are systemically discussed. Finally, we outline some new perspectives of opportunities and challenges in developing GDY/MOs for efficient energy and environmental catalysis.

Oxygen vacancies induced by lanthanum-doped indium oxide nanofibers for promoted temperature-dependent triethylamine and formaldehyde sensing

A novel TEA and HCHO dual-function temperature-dependent sensing material (3La-In2O3) with ultra-high sensitivity was developed via a facile electrospinning process. Though rare earth doped in In2O3-based sensors have been widely reported, the low sensitivity, poor selectivity and high operating temperature remain restrict their application. Herein, the In2O3 nanofibers with different contents of La3+ ions are firstly obtained by a facile electrospinning process. The sensing performance investigation confirms that the 3% La/In molar ratio of La3+ doped in In2O3 nanofibers are more appropriate as the sensing material for TEA and HCHO detection. The 3La-In2O3 exhibits greatest response value of 3721.60-10 ppm TEA and 1469.65-10 ppm HCHO at their best working temperature (100 ℃ and 160 ℃), approximately 23.85-fold and 10.85-fold higher than that of pristine In2O3 nanofibers. In addition, the excellent selectivity, repeatability, and long-term stability ensure the further application of the 3La-In2O3-based sensor in actual environment. The promoted sensing performance is mainly ascribed to the more oxygen vacancies, the increasing specific surface area, the smaller grain size of In2O3 nanofibers induced by La3+ doping. The DFT results demonstrate the beneficial effect of La and oxygen vacancies on the improved target gas adsorption energy.

Enhanced molecular oxygen activation via K/O interfacial modification for boosted electrocatalytic degradation over a broad pH range

Molecular oxygen activation plays an important role in the electrocatalytic degradation of recalcitrant pollutants. And the key lies in the tailoring of electronic structures over catalysts. Herein, carbon nitride with K/O interfacial modification (KOCN) was designed and fabricated for efficient molecular oxygen activation. Theoretical screening results revealed the possible substitution of peripheral N atoms by O atoms and the location of K atoms in the six-fold cavities of g-C3N4 framework. Spectroscopic and experimental results reveal that the existence of K/O promotes charge redistribution over as-prepared catalysts, leading to optimized electronic structures. Therefore, optimized oxygen adsorption was realized over 8 % KOCN, which was further converted into superoxide and singlet oxygen effectively. The rate constant of 8 % KOCN (1.8 × 10-2 min-1) reached 2.2 folds of pristine g-C3N4 (8.1 × 10-3 min-1) counterpart during tetracycline degradation. Moreover, the high electron mobility and excellent structural stability endow the catalyst with remarkable catalytic performance in a broad pH range of 3-11.

Synergistic effect of Fe doping and oxygen vacancy in AgIO3 for effectively degrading organic pollutants under natural sunlight

In this work, a series of hydrogenated Fe-doped AgIO3 (FAI-x) catalysts are synthesized for photodegrading diverse azo dyes and antibiotics. Under the irradiation of natural sunlight with a light intensity of ∼60 mW/cm2, the optimum FAI-10 exhibits a considerable rate constant for decomposing methyl orange (MO) of 0.067 min-1, about 7.4 times higher than that of AgIO3 (0.009 min-1), and 24.6% and 83.8% of MO can be decomposed over AgIO3 and FAI-10 after irradiation for 40 min. In the amplification photodegradation experiments with using 0.5 g catalyst and 400 mL MO dye solution (10 mg/L), FAI-10 possesses greatly higher photoreactivity to common semiconductors (ZnO, TiO2, In2O3 and Bi2MoO6), and the photodegradation rates over FAI-10 are 92%. Particularly, the FAI-10 shows superior stability, the activity of which remains unaltered after 8 continuous cycles. Foreign ions and water bodies have slight effect on the activity of FAI-10, but the MO degradation rates are decreased by adjusting pH values, especially when pH = 11 because of the strong electrostatic repulsion between MO and FAI-10. FAI-10 can also effectively decompose another azo dye (rhodamine B (RhB)) and diverse antibiotics (sulflsoxazole (SOX), chlortetracycline hydrochloride (CTC), tetracycline hydrochloride (TC) and ofloxacin (OFX)). The activity enhancement mechanism of FAI-10 has been systemically investigated and is ascribed to the promoted photo-absorption, charge separation and transfer efficiency, and affinity of organic pollutants, owing to the synergistic effect of Fe doping and oxygen vacancy (Ov). The photocatalytic mechanisms and process for decomposing MO are verified and proposed based on radical trapping experiments and liquid chromatography-mass spectrometry (LC-MS). This work opens an avenue for the fabrication of effective photocatalysts toward water purification.

Broad Spectral Response FeOOH/BiO2-x Photocatalyst with Efficient Charge Transfer for Enhanced Photo-Fenton Synergistic Catalytic Activity

In this work, to promote the separation of photogenerated carriers, prevent the catalyst from photo-corrosion, and improve the photo-Fenton synergistic degradation of organic pollutants, the coating structure of FeOOH/BiO2-x rich in oxygen vacancies was successfully synthesized by a facile and environmentally friendly two-step process of hydrothermal and chemical deposition. Through a series of degradation activity tests of synthesized materials under different conditions, it was found that FeOOH/BiO2-x demonstrated outstanding organic pollutant degradation activity under visible and near-infrared light when hydrogen peroxide was added. After 90 min of reaction under photo-Fenton conditions, the degradation rate of Methylene Blue by FeOOH/BiO2-x was 87.4%, significantly higher than the degradation efficiency under photocatalysis (60.3%) and Fenton (49.0%) conditions. The apparent rate constants of FeOOH/BiO2-x under photo-Fenton conditions were 2.33 times and 3.32 times higher than photocatalysis and Fenton catalysis, respectively. The amorphous FeOOH was tightly coated on the layered BiO2-x, which significantly increased the specific surface area and the number of active sites of the composites, and facilitated the improvement of the separation efficiency of the photogenerated carriers and the prevention of photo-corrosion of BiO2-x. The analysis of the mechanism of photo-Fenton synergistic degradation clarified that ·OH, h+, and ·O2- are the main active substances involved in the degradation of pollutants. The optimal degradation conditions were the addition of the FeOOH/BiO2-x composite catalyst loaded with 20% Fe at a concentration of 0.5 g/L, the addition of hydrogen peroxide at a concentration of 8 mM, and an initial pH of 4. This outstanding catalytic system offers a fresh approach to the creation and processing of iron-based photo-Fenton catalysts by quickly and efficiently degrading various organic contaminants.

Spin Polarization: A New Frontier in Efficient Photocatalysis for Environmental Purification and Energy Conversion

As a promising strategy to improve photocatalytic efficiency, spin polarization has attracted enormous attention in recent years, which could be involved in various steps of photoreaction. The Pauli repulsion principle and the spin selection rule dictate that the behavior of two electrons in a spatial eigenstate is based on their spin states, and this fact opens up a new avenue for manipulating photocatalytic efficiency. In this review, recent advances in modulating the photocatalytic activity with spin polarization are systematically summarized. Fundamental insights into the influence of spin-polarization effects on photon absorption, carrier separation, and migration, and the behaviors of reaction-related substances from the photon uptake to reactant desorption are highlighted and discussed in detail, and various photocatalytic applications for environmental purification and energy conversion are presented. This review is expected to deliver a timely overview of the recent developments in spin-polarization-modulated photocatalysis for environmental purification and energy conversion in terms of their practical applications.

Role of the In-Situ-Formed Surface (Pt-S-O)-Ti Active Structure in SO2-Promoted C3H8 Combustion over a Pt/TiO2 Catalyst

Typically, SO2 unavoidably deactivates catalysts in most heterogeneous catalytic oxidations. However, for Pt-based catalysts, SO2 exhibits an extraordinary boosting effect in propane catalytic oxidation, but the promotive mechanism remains contentious. In this study, an in situ-formed tactful (Pt-S-O)-Ti structure was concluded to be a key factor for Pt/TiO2 catalysts with a substantial SO2 tolerance ability. The experiments and theoretical calculations confirm that the high degree of hybridization and orbital coupling between Pt 5d and S 3p orbitals enable more charge transfer from Pt to S species, thus forming the (Pt-S-O)-Ti structure with the oxygen atom dissociated from the chemisorbed O2 adsorbed on oxygen vacancies. The active oxygen atom in the (Pt-S-O)-Ti active structure is a robust site for C3H8 adsorption, leading to a better C3H8 combustion performance. This work can provide insights into the rational design of chemical bonds for high SO2 tolerance catalysts, thereby improving economic and environmental benefits.

A Full-Spectrum ZnS Photocatalyst with Gradient Distribution of Atomic Copper Dopants and Concomitant Sulfur Vacancies for Highly Efficient Hydrogen Evolution

A rarely discussed phenomenon in the realm of photocatalytic materials involves the presence of gradient distributed dopants and defects from the interior to the surface. This intriguing characteristic has been successfully achieved in the case of ZnS through the incorporation of atomic monovalent copper ions (Cu+) and concurrent sulfur vacancies (Vs), resulting in a photocatalyst denoted as G-CZS1-x. Through the cooperative action of these atomic Cu dopants and Vs, G-CZS1-x significantly extends its photoabsorption range to encompass the full spectrum (200-2100 nm), which improves the solar utilization ability. This alteration enhances the efficiency of charge separation and optimizes Δ(H*) (free energy of hydrogen adsorption) to approach 0 eV for the hydrogen evolution reaction (HER). It is noteworthy that both surface-exposed atomic Cu and Vs act as active sites for photocatalysis. G-CZS1-x exhibits a significant H2 evolution rate of 1.01 mmol h-1 in the absence of a cocatalyst. This performance exceeds the majority of previously reported photocatalysts, exhibiting approximately 25-fold as ZnS, and 5-fold as H-CZS1-x with homogeneous distribution of equal content Cu dopants and Vs. In contrast to G-CZS1-x, the H adsorption on Cu sites for H-CZS1-x (ΔG(H*) = -1.22 eV) is excessively strong to inhibit the H2 release, and the charge separation efficiency for H-CZS1-x is relatively sluggish, revealing the positive role of a gradient distribution model of dopants and defects on activity enhancement. This work highlights the synergy of atomic dopants and defects in advancing photoactivity, as well as the significant benefit of the controllable distribution model of dopants and defects for photocatalysis.

Surface oxygen vacancy-dependent molecular oxygen activation for propane combustion over α-MnO2

Oxygen vacancies (OV), as the sites of molecular oxygen adsorption and activation, play an important role in the catalytic combustion process of volatile organic compounds (VOCs). Revealing the relationship between OV concentration and molecular oxygen activation behavior is of significance to construct the efficient catalysts. Herein, α-MnO2 with different OV concentrations was prepared to investigate the molecular oxygen activation for C3H8 combustion. It is disclosed that the enhanced OV concentration in α-MnO2 induced the reconfiguration of surface metal atoms, resulting in the transformation of oxygen activation configuration from end-on mode to side-on mode. Oxygen molecules in side-on mode possessed more localized electron density and weaker coordination bond strength with surrounding Mn atoms, which were more favorable to adsorb C3H8 molecules and activate C-H bond for the improved combustion performance. This work provides a new understanding to reveal that the increased OV concentration contributes to more efficient VOCs combustion.

Imperfect makes perfect: defect engineering of photoelectrodes towards efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting for hydrogen evolution has been considered as a promising technology to solve the energy and environmental issues. However, the solar-to-hydrogen (STH) conversion efficiencies of current PEC systems are far from meeting the commercial demand (10%) due to the lack of efficient photoelectrode materials. The recent rapid development of defect engineering of photoelectrodes has significantly improved the PEC performance, which is expected to break through the bottleneck of low STH efficiency. In this review, the category and the construction methods of different defects in photoelectrode materials are summarized. Based on the in-depth summary and analysis of existing reports, the PEC performance enhancement mechanism of defect engineering is critically discussed in terms of light absorption, carrier separation and transport, and surface redox reactions. Finally, the application prospects and challenges of defect engineering for PEC water splitting are presented, and the future research directions in this field are also proposed.

Achieving High Selectivity in Photocatalytic Oxidation of Toluene on Amorphous BiOCl Nanosheets Coupled with TiO2

The inert C(sp³)-H bond and easy overoxidation of toluene make the selective oxidation of toluene to benzaldehyde a great challenge. Herein, we present that a photocatalyst, constructed with a small amount (1 mol %) of amorphous BiOCl nanosheets assembled on TiO₂ (denoted as 0.01BOC/TiO₂), shows excellent performance in toluene oxidation to benzaldehyde, with 85% selectivity at 10% conversion, and the benzaldehyde formation rate is up to 1.7 mmol g^-1 h^-1, which is 5.6 and 3.7 times that of bare TiO₂ and BOC, respectively. In addition to the charge separation function of the BOC/TiO₂ heterojunction, we found that the amorphous structure of BOC endows its abundant surface oxygen vacancies (Ov), which can further promote the charge separation. Most importantly, the surface Ov of amorphous BOC can efficiently adsorb and activate O₂, and amorphous BOC makes the product, benzaldehyde, easily desorb from the catalyst surface, which alleviates the further oxidation of benzaldehyde, and results in the high selectivity. This work highlights the importance of the microstructure based on heterojunctions, which is conducive to the rational design of photocatalysts with high performance in organic synthesis.

Extended application of defective metal oxide BiO2-x: Liquid phase low-temperature thermal catalysis for the removal of phenolic pollutants

Bismuth oxide (BiO_2-x) with oxygen vacancies was created using a hydrothermal process and was found to exhibit good catalytic oxidation performance under low-temperature heating without the addition of external oxidants. The catalytic activity of BiO_2-x was tested using 4-chlorophenol (4-CP) as the target aqueous pollutant. We observed that 10 ppm of 4-CP was completely degraded within 40 min at a reaction temperature of 65 °C. The effective elimination of 4-CP was attributed to active oxygen species produced by the release of lattice oxygen. Furthermore, the low-temperature thermal catalytic activity of BiO_2-x was affected by the electron transfer characteristics of pollutants, leading to the rapid degradation of electron-rich pollutants. This study reveals the unique application of BiO_2-x as a catalyst for removing phenolic pollutants under low-temperature thermal catalysis, thereby expanding its catalytic application scenarios and offering a new approach for the degradation of phenolic pollutants.

Dynamic active-site induced by host-guest interactions boost the Fenton-like reaction for organic wastewater treatment

In heterogeneous catalysis, uncovering the dynamic evolution of active sites in the working conditions is crucial to realizing increased activity and enhanced stability of catalyst in Fenton-like activation. Herein, we capture the dynamic changes in the unit cell of Co/La-SrTiO₃ catalyst during the exemplary peroxymonosulfate activation process using X-ray absorption spectroscopy and in situ Raman spectroscopy, revealing the substrate tuned its structural evolution, which is the reversible stretching vibration of O-Sr-O and Co/Ti-O bonds in different orientations. This process effectively promotes the generation of key SO₅* intermediates, which is beneficial to the formation of ¹O₂ and SO₄^•- from persulfate on the Co active site. Density functional theory and X-ray absorption spectroscopy show that the optimized structural distortion enhanced the metal-oxygen bond strength by tuning the e_g orbitals and increased the number of transferred electrons to peroxymonosulfate by about 3-fold, achieving excellent efficiency and stability in removing organic pollutants.

Deciphering the photoactive species-directed antibacterial mechanism of bismuth oxychloride with modulated nanoscale thickness

As an environmentally benign disinfection strategy, photocatalytic bacterial inactivation using nanoparticles involves photogenerated reactive species that cause cellular oxidative stress. Rationalising the structural performance of photocatalysts for the practical uses such as wastewater treatment has attracted significant attention; however, the contribution of reactive species to their photocatalytic antibacterial activities at the molecular and transcriptomic levels remains unclear. In this study, nontoxic bismuth oxychloride (BiOCl) photocatalysts with different nanoscale thicknesses, including nanosheets (Ns, ∼5.4 nm), nanoplates (Np, ∼1.8 nm), and ultra-nanosheets (Uns, ∼1.1 nm), were synthesised under hydrothermal conditions. Among the three samples, BiOCl Uns exhibited the most effective photocatalytic degradation efficiency with the calculated apparent rate constant of 0.0294 min^-1, ∼4 times faster than that of Ns, whereas BiOCl Ns possessed the most pronounced bactericidal effect (5.4 log inactivation). Such findings indicate the distinct role of the photoactive species responsible for photocatalytic bacterial inactivation. Moreover, transcriptome analysis of Escherichia coli after photocatalytic treatment revealed that the underlying photocatalytic antibacterial mechanism at the genetic expression level involves cellular component biosynthesis, energy metabolism, and material transportation. Notably, the differences between BiOCl Ns and BiOCl Uns were significantly enriched in purine metabolism. Therefore, the cost-effective preparation of BiOCl nanosheets with nanoscale thickness-modulated photocatalytic antibacterial activity has remarkable potential for sustainable environmental and biomedical applications.

Magnetic-field-induced simultaneous charge separation and oxygen transfer in photocatalytic oxygen activation for algae inactivation

Photocatalytic oxygen activation is an excellent strategy for algae control in water. However, the fast recombination of photogenerated charge and slow rate of oxygen transfer limit the reactive oxygen species generation efficiency for algae inactivation. Herein, to solve above issues, magnetic field was introduced to the BiO_2-x/Bi₃NbO₇ system to effectively covert oxygen into reactive radicals. The electrochemical experiment and DFT calculation results indicated the charge separation could be accelerated by the Lorentz force generated by the magnetic field, resulting in increase of electron concentration. Meanwhile, the value of volumetric gas-liquid mass transfer coefficient was increased by 59.79 % with magnetic field, thus more oxygen could be reduced to superoxide radical. Photocatalytic algae inactivation rate by BiO_2-x/Bi₃NbO₇ with magnetic field could be increased by 2.07 times than that without magnet filed. This work further extends the strategy of using magnetic field to simultaneously facilitate the charge separation and oxygen transfer rate.

Enhanced Interfacial Electron Transfer by Asymmetric Cu-Ov -In Sites on In2 O3 for Efficient Peroxymonosulfate Activation

Enhancing the peroxymonosulfate (PMS) activation efficiency to generate more radicals is vital to promote the Fenton-like reaction activity, however, how to promote the PMS adsorption and accelerate the interfacial electron transfer to boost its activation kinetics remains a great challenge. Herein, we prepared Cu-doped defect-rich In₂ O₃ (Cu-In₂ O₃ /O_v ) catalysts containing asymmetric Cu-O_v -In sites for PMS activation in water purification. The intrinsic catalytic activity is that the side-on adsorption configuration of the O-O bond (Cu-O-O-In) at the Cu-O_v -In sites significantly stretches the O-O bond length. Meanwhile, the Cu-O_v -In sites increase the electron density near the Fermi energy level, promoting more and faster electron transfer to the O-O bond for generating more SO₄ ⋅^- and ⋅OH. The degradation rate constant of tetracycline achieved by Cu-In₂ O₃ /O_v is 31.8 times faster than In₂ O₃ /O_v , and it shows the possibility of membrane reactor for practical wastewater treatment.

Photocatalytic oxidation degradation of tetracycline over La/Co@TiO2 nanospheres under visible light

The oxygen-vacancy-rich La/Co@TiO₂ nanospheres for the photo catalytic degradation of tetracycline were prepared by a simple two-step method. 3 wt%La/Co@TiO₂ nanospheres had better photocatalytic performance of the degradation of tetracycline than that of the other catalysts under visible light may be due to the synergistic effect between La/Co and TiO₂ and nano-confined effect. The catalytic experimental results showed the degradation ratio of tetracycline (40 mg/L) were 100% for 90 min. XPS, Raman, and photoelectrochemical results showed appropriate number of oxygen vacancies existed on the surface of TiO₂, which could improve the activation efficiency of dissolved oxygen in tetracycline solution because they accelerated the electron transfer rate in the system and inhibited the photoelectron-hole pair recombination under visible light. The EPR and radical scavenger tests showed h⁺, O₂^-, and ·OH were the main active species for the degradation of tetracycline. Also, the possible mechanism and intermediates of the tetracycline degradation process were speculated under the visible light. La/Co@TiO₂ nanospheres would be a promising photocatalyst for wastewater treatment.

Exploring the origin of efficient adsorption of poly- and perfluoroalkyl substances in household point-of-use water purifiers: Deep insights from a joint experimental and computational study

Poly- and perfluoroalkyl substances (PFAS) are harmful chemicals to humans and widely detected in water bodies including tap water. PFAS cannot be efficiently removed from water through conventional treatment processes used in full-scale drinking water treatment plants, posing a latent risk to human health via drinking tap water. Here in-field investigations show that the household point-of-use (POU) water purifiers constituted with coconut shell activated carbon can achieve 21%-99% removal for 14 legacy and emerging PFAS in tap water based on the ratio of influent and effluent. Extensive characterizations combine with chemical analyses demonstrate that physical adsorption based on Van der Waals force can remove 23 PFAS from tap water, wherein the hydrophobicity of PFAS is the crucial factor. Density functional theory calculations together with the quantitative structure-activity relationship model confirm that both topological structures as well as hydrophobicity of PFAS and electrostatic interactions between the strong electronegative F atoms and the adsorbent surface are the most critical factors controlling the PFAS adsorption to activated carbon. Overall, our results offer insights into the molecular mechanisms that enable the adsorption of PFAS in POU filters.

Efficient Oxidation of Paracetamol Triggered by Molecular-oxygen Activation at β-cyclodextrin Modified Titanate Nanotube

Titanate nanotube (TNT) was coated with the cyclic oligosaccharides (carboxymethyl-β-cyclodextrin, CM-β-CD) to obtain a photocatalyst (CM-β-CD-TNT) for efficiently activating molecular oxygen and removing the target contaminant. The hydrophobic cavity and the large specific surface area of the photocatalyst provide abundant active sites for activating molecular oxygen. The free radical capture experiment and quenching experiment showed that cyclodextrin could facilitate adsorption and activation of molecular oxygen to produce O2·-. Therefore, compared with the pristine TNT, CM-β-CD-TNT accelerated the oxidation efficiency of paracetamol (APAP) by 3.4 times. Moreover, the ring cleavage reaction induced by CM-β-CD-TNT effectively reduced the acute toxicity of wastewater containing APAP. Furthermore, 100% of bisphenol A (BPA), bisphenol S (BPS), phenol, 2,4-dichlorophen (2,4-DCP), and carbamazepine (CBZ) were degraded by CM-β-CD-TNT after 2.5 h Ultraviolet (UV) light irradiation. This strategy provides a new dimension for the advanced treatment of organic wastewater by organic macrocyclic molecules modified materials.

Oxygen Vacancy-Mediated Growth of Amorphous Discharge Products toward an Ultrawide Band Light-Assisted Li-O2 Batteries

Photoassisted electrochemical reaction is regarded as an effective approach to reduce the overpotential of lithium-oxygen (Li-O₂ ) batteries. However, the achievement of both broadband absorption and long term battery cycling stability are still a formidable challenge. Herein, an oxygen vacancy-mediated fast kinetics for a photoassisted Li-O₂ system is developed with a silver/bismuth molybdate (Ag/Bi₂ MoO₆ ) hybrid cathode. The cathode can offer both double advantages for light absorption covering UV to visible region and excellent electrochemical activity for O₂ . Upon discharging, the photoexcited electrons from Ag nanoplate based on the localized surface plasmon resonance (LSPR) are injected into the oxygen vacancy in Bi₂ MoO₆ . The fast oxygen reaction kinetics generate the amorphous Li₂ O₂ , and the discharge plateau is improved to 3.05 V. Upon charging, the photoexcited holes are capable to decompose amorphous Li₂ O₂ promptly, yielding a very low charge plateau of 3.25 V. A first cycle round-trip efficiency is 93.8% and retention of 70% over 500 h, which is the longest cycle life ever reported in photoassisted Li-O₂ batteries. This work offers a general and reliable strategy for boosting the electrochemical kinetics by tailoring the crystalline of Li₂ O₂ with wide-band light.

Middle-low-temperature oxidation and adsorption of arsenic from flue gas by Fe-Ce-based composite catalyst

Fe-Ce-based composite catalysts were prepared and used for As₂O₃ catalytic oxidation and adsorption. They were characterized by XRD, BET, H₂-TPR, Raman, SEM and XPS. The results suggests Fe, La and Zr can be partially doped into CeO₂ lattice to form solid solutions. Compared with pure Fe₂O₃, the composite catalysts have stronger low-temperature reducibility, especially La³⁺ doping is beneficial to the formation of more low-temperature active sites. Raman and XPS measurements disclose the presence of oxygen vacancy and surface adsorbed oxygen in composite catalysts and these are more prominent in FeCeLaO. Ce³⁺ ratio increases to 18.30% after reaction, which confirms part of Ce⁴⁺ can participate in As₂O₃ oxidation and be reduced to Ce³⁺. The oxidation and adsorption capacity for As₂O₃ were investigated at different temperatures and O₂ concentrations. The results show FeCeLaO exhibits excellent activity at middle-low-temperatures of 200-400 °C, the oxidation efficiency of As₂O₃ can reach 100%, the total adsorbed arsenic at 400 °C reaches 583.7 μg/g, which is 1.8 times of pure Fe₂O₃ at 600 °C. As₂O₃ oxidation mechanism over FeCeLaO with/without O₂ was proposed through the Mars-Maessen theory with the aid of surface-active oxygen. The abundant oxygen vacancy defects and active chemisorbed oxygen play important roles and guarantee an efficient As₂O₃ oxidation, which is also the essential reason why the composite catalysts can effectively oxidize and adsorb As₂O₃ at middle-low-temperature of 200-400 °C, while pure Fe₂O₃ can only be at high temperature of 600-700 °C.

Synthesis of novel highly-dispersed manganese oxide on porous calcium silicate for the catalytic oxidation of toluene

Highly-dispersed MnOx with abundant oxygen vacancy on porous calcium silicate for the catalytic oxidation of toluene.

Dual modulation steering electron reducibility and transfer of bismuth molybdate nanoparticle to boost carbon dioxide photoreduction to carbon monoxide

Owing to the exorbitant CO₂ activation energy and unsatisfactory photogenerated charge separation efficiency, CO₂ photoconversion still faces enormous challenges. In this study, a directional electron transfer channel has been established by decorating N-doped carbon quantum dots (N-CQDs) on the surface of Bi₄MoO₉ nanoparticles to ensure that more active electrons can participate in the CO₂ reduction. The conduction band of Bi₄MoO₉ nanoparticles is calculated to be -1.55 eV versus the normal hydrogen electrode (NHE), pH = 7, which is negative enough to attain the photocatalytic CO₂ reduction potential of -0.53 eV versus NHE, pH = 7. CO₂ adsorption curves and in situ Fourier transform infrared spectra reveal that N-CQDs facilitate surface CO₂ adsorption and activation, as well as CO desorption. In addition, steady-state photoluminescence and photoelectrochemical tests prove that the charge separation efficiency can be greatly enhanced by constructing N-CQDs/Bi₄MoO₉ composites. In the presence of pure water, N-CQDs/Bi₄MoO₉-2 composite achieved a CO yield of 16.22 μmol g^-1 after 5 h Xe light illumination, which was 3.24 times higher than that of pure Bi₄MoO₉ (4.98 μmol g^-1). This study offers a distinctive approach to the optimization of Bi₄MoO₉ photocatalysts and their application in energy conversion.

Adjacent single-atom irons boosting molecular oxygen activation on MnO2

Efficient molecular oxygen activation is crucial for catalytic oxidation reaction, but highly depends on the construction of active sites. In this study, we demonstrate that dual adjacent Fe atoms anchored on MnO₂ can assemble into a diatomic site, also called as MnO₂-hosted Fe dimer, which activates molecular oxygen to form an active intermediate species Fe(O = O)Fe for highly efficient CO oxidation. These adjacent single-atom Fe sites exhibit a stronger O₂ activation performance than the conventional surface oxygen vacancy activation sites. This work sheds light on molecular oxygen activation mechanisms of transition metal oxides and provides an efficient pathway to activate molecular oxygen by constructing new active sites through single atom technology.

Oxygen-vacancy-mediated LaFe1-xMnxO3-δ perovskite nanocatalysts for degradation of organic pollutants through enhanced surface ozone adsorption and metal doping effects

Here, a series of LaFe_1-xMn_xO_3-δ perovskite nanocatalysts were synthesized and tested for the catalytic ozonation of m-cresol for the first time. The B-site cation is regulated by metal doping, and the resulting LaFe_0.26Mn_0.74O_3-δ with a rhombohedral structure showed excellent catalytic performance and structural stability owing to the abundant oxygen vacancies and the higher Fe²⁺/Fe³⁺ and Mn³⁺/Mn⁴⁺ ratios. Theoretical calculations have revealed that the oxygen vacancy has a strong affinity for ozone adsorption, and thus facilitated ozone decomposition by extending the O-O bond. Combined with low-valence Fe²⁺ and Mn³⁺ cations, the electron transfer in the catalytic ozonation reaction has been enhanced, which has promoted the production of reactive oxygen species (ROS). Taken together, the degradation pathway of m-cresol was proposed. Additionally, the LaFe_0.26Mn_0.74O_3-δ catalyst remained stable during a 60 h reaction. This study has not only revealed the adsorption/decomposition pathways of ozone using LaFe_0.26Mn_0.74O_3-δ perovskite nanocatalysts but also provided indepth insight into the electron transfer pathway on the surface of nanocatalysts during the process of catalytic ozonation.

Oxygen vacancy BiO2-x/Bi2WO6 synchronous coupling with Bi metal for phenol removal via visible and near-infrared light irradiation

The introduction of oxygen-defects has been a versatile strategy to enhance photocatalysis efficiency. In this work, a 2D/3D Bi/BiO_2-x/Bi₂WO₆ heterojunction photocatalyst with rich oxygen-defective was in sequence prepared through a facile solvothermal method, which displays favorable photocatalytic activity towards organic contaminants under visible-NIR light irradiation. The enhancement in photocatalytic performance can be attributed to the synergistic effect between oxygen-vacancy-rich heterojunction and the localized surface plasmon resonance induced by metallic Bi. The functional group interaction, surface morphology, crystal structure, element composition, and tuned bandgap were investigated by FT-IR, SEM, Raman shift, ICP-MS, and XPS technique. The spectrum response performance of the photocatalyst was verified by UV-visible DRS analysis. Results of photodegradation experiments toward organic contaminants showed that the prepared photocatalyst can degrade 90% of phenol in 20 mins under visible-NIR light irradiation, both Z-scheme heterojunction and the introduction of Bi metal contribute to the enhancement in the photocatalytic activity. The results of the DFT calculation suggest that the valence band-edge hybridization within BiO_2-x and Bi₂WO₆ can effectively enhance the photocatalytic performance by increasing the migration efficiencies of electron-hole pairs. Moreover, a possible mechanism was proposed on the results of EIS, ESR and GC-MS tests. This work offers a novel insight for synthesizing efficient visible-NIR light photocatalysis by activating the semiconductors with Bi metal.

Defect Engineering Enables Synergistic Action of Enzyme-Mimicking Active Centers for High-Efficiency Tumor Therapy

Perusing redox nanozymes capable of disrupting cellular homeostasis offers new opportunities to develop cancer-specific therapy, but remains challenging, because most artificial enzymes lack enzyme-like scale and configuration. Herein, for the first time, we leverage a defect engineering strategy to develop a simple yet efficient redox nanozyme by constructing enzyme-mimicking active centers and investigated its formation and catalysis mechanism thoroughly. Specifically, the partial Fe doping in MoO_x (donated as Fe-MoO_v) was demonstrated to activate structure reconstruction with abundant defect site generation, including Fe substitution and oxygen vacancy (OV) defects, which significantly enable the binding capacity and catalytic activity of Fe-MoO_v nanozymes in a synergetic fashion. More intriguingly, plenty of delocalized electrons appear due to Fe-facilitated band structure reconstruction, directly contributing to the remarkable surface plasmon resonance effect in the near-infrared (NIR) region. Under NIR-II laser irradiation, the designed Fe-MoO_v nanozymes are able to induce substantial disruption of redox and metabolism homeostasis in the tumor region via enzyme-mimicking cascade reactions, thus significantly augmenting therapeutic effects. This study that takes advantage of defect engineering offers new insights into developing high-efficiency redox nanozymes.

Atomic-Level Charge Separation Strategies in Semiconductor-Based Photocatalysts

Semiconductor-based photocatalysis as a productive technology furnishes a prospective solution to environmental and renewable energy issues, but its efficiency greatly relies on the effective bulk and surface separation of photoexcited charge carriers. Exploitation of atomic-level strategies allows in-depth understanding on the related mechanisms and enables bottom-up precise design of photocatalysts, significantly enhancing photocatalytic activity. Herein, the advances on atomic-level charge separation strategies toward developing robust photocatalysts are highlighted, elucidating the fundamentals of charge separation and transfer processes and advanced probing techniques. The atomic-level bulk charge separation strategies, embodied by regulation of charge movement pathway and migration dynamic, boil down to shortening the charge diffusion distance to the atomic-scale, establishing atomic-level charge transfer channels, and enhancing the charge separation driving force. Meanwhile, regulating the in-plane surface structure and spatial surface structure are summarized as atomic-level surface charge separation strategies. Moreover, collaborative strategies for simultaneous manipulation of bulk and surface photocharges are also introduced. Finally, the existing challenges and future prospects for fabrication of state-of-the-art photocatalysts are discussed on the basis of a thorough comprehension of atomic-level charge separation strategies.

Exploiting Co Defects in CoFe-Layered Double Hydroxide (CoFe-LDH) Derivatives for Highly Efficient Photothermal Cancer Therapy

Currently, two-dimensional materials are being actively pursued in catalysis and other fields due their abundance of defects, which results in enhanced performance relative to their bulk defect-free counterparts. To date, the exploitation of defects in two-dimensional materials to enhance photothermal therapies has received little attention, motivating a detailed investigation. Herein, we successfully fabricated a series of novel CoFe-based photothermal agents (CoFe-x) by heating CoFe-layered double hydroxide (CoFe-LDH) nanosheets at different temperatures (x) between 200-800 °C under a Ar atmosphere. The CoFe-x products differed in their particle size, cobalt defect concentration, and electronic structure, with the CoFe-500 product containing the highest concentration of Co²⁺ defects and most efficient photothermal performance under near-infrared (NIR, 808 nm) irradiation. Experiments and density functional theory (DFT) calculations revealed that Co²⁺ defects modify the electronic structure of CoFe-x, narrowing the band gap and thus increasing the nonradiative recombination rate, thereby improving the NIR-driven photothermal properties. In vitro and in vivo results demonstrated that CoFe-500 was an efficient agent for photothermal cancer treatment and also near-infrared (NIR) thermal imaging, magnetic resonance (MR) imaging, and photoacoustic (PA) imaging. This work provides valuable new insights about the role of defects in the rational design of nanoagents with optimized structures for improved cancer therapy.

Synthesis of a Gold-Metal Oxide Core-Satellite Nanostructure for In Situ SERS Study of CuO-Catalyzed Photooxidation

This work reports on an assembling-calcining method for preparing gold-metal oxide core-satellite nanostructures, which enable surface-enhanced Raman spectroscopic detection of chemical reactions on metal oxide nanoparticles. By using the nanostructure, we study the photooxidation of Si-H catalyzed by CuO nanoparticles. As evidenced by the in situ spectroscopic results, oxygen vacancies of CuO are found to be very active sites for oxygen activation, and hydroxide radicals (*OH) adsorbed at the catalytic sites are likely to be the reactive intermediates that trigger the conversion from silanes into the corresponding silanols. According to our finding, oxygen vacancy-rich CuO catalysts are confirmed to be of both high activity and selectivity in photooxidation of various silanes.

Tailoring the Surface Properties of Bi2O2NCN by in Situ Activation for Augmented Photoelectrochemical Water Oxidation on WO3 and CuWO4 Heterojunction Photoanodes

Bismuth(III) oxide-carbodiimide (Bi₂O₂NCN) has been recently discovered as a novel mixed-anion semiconductor, which is structurally related to bismuth oxides and oxysulfides. Given the structural versatility of these layered structures, we investigated the unexplored photochemical properties of the target compound for photoelectrochemical (PEC) water oxidation. Although Bi₂O₂NCN does not generate a noticeable photocurrent as a single photoabsorber, the fabrication of heterojunctions with the WO₃ thin film electrode shows an upsurge of current density from 0.9 to 1.1 mA cm^–2 at 1.23 V vs reversible hydrogen electrode (RHE) under 1 sun (AM 1.5G) illumination in phosphate electrolyte (pH 7.0). Mechanistic analysis and structural analysis using powder X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and scanning transmission electron microscopy energy-dispersive X-ray spectroscopy (STEM EDX) indicate that Bi₂O₂NCN transforms during operating conditions in situ to a core–shell structure Bi₂O₂NCN/BiPO₄. When compared to WO₃/BiPO₄, the in situ electrolyte-activated WO₃/Bi₂O₂NCN photoanode shows a higher photocurrent density due to superior charge separation across the oxide/oxide-carbodiimide interface layer. Changing the electrolyte from phosphate to sulfate results in a lower photocurrent and shows that the electrolyte determines the surface chemistry and mediates the PEC activity of the metal oxide-carbodiimide. A similar trend could be observed for CuWO₄ thin film photoanodes. These results show the potential of metal oxide-carbodiimides as relatively novel representatives of mixed-anion compounds and shed light on the importance of the control over the surface chemistry to enable the in situ activation.

Phosphate electrolyte activates the metal oxide−Bi₂O₂NCN heterojunction.