Transition-Metal-Containing Porphyrin Metal-Organic Frameworks as π-Backbonding Adsorbents for NO2 Removal

Construction of a CoNiHHTP MOF/PHI Z-Scheme Heterojunction for ppb Level NO2 Photoelectric Sensing with 405 nm Irradiation at RT

Ultrasensitive photoelectric detection of nitrogen dioxide (NO2) with PHI under visible light irradiation at room temperature (RT) remains an ongoing challenge due to the low charge separation and scarce adsorption sites. In this work, a dimensionally matched ultrathin CoNiHHTP MOF/PHI Z-scheme heterojunction is successfully constructed by taking advantage of the π-π interactions existing between the CoNiHHTP MOF and PHI. The amount-optimized heterojunction possesses a record detection limit of 1 ppb (response = 15.6%) for NO2 under 405 nm irradiation at RT, with reduced responsive (3.6 min) and recovery (2.7 min) times, good selectivity and reversibility, and long-time stability (150 days) compared with PHI, even superior to others reported at RT. Based on the time-resolved photoluminescence spectra, in situ X-ray photoelectron spectra, and diffuse reflectance infrared Fourier transform spectroscopy results, the resulting sensing performance is attributed to the favorable Z-scheme charge transfer and separation. Moreover, the Ni nodes favorably present in adjacent metal sites between the lamellae contribute to charge transfer and redistribution, whereas Co nodes could act as selective centers for promoted adsorption of NO2. Interestingly, it is confirmed that the CoNiHHTP MOF/PHI heterojunction could effectively reduce the influence of O2 in the gas-sensitive reaction due to their unique bimetallic (Co and Ni) nodes, which is also favorable for the improved sensing performances for NO2. This work provides a feasible strategy to develop promising PHI-based optoelectronic gas sensors at RT.

Highly Efficient One-pot Electrosynthesis of Oxime Ethers from NOx over Ultrafine MgO Nanoparticles Derived from Mg-based Metal-Organic Frameworks

Oxime ethers are attractive compounds in medicinal scaffolds due to the biological and pharmaceutical properties, however, the crucial and widespread step of industrial oxime formation using explosive hydroxylamine (NH2OH) is insecure and troublesome. Herein, we present a convenient method of oxime ether synthesis in a one-pot tandem electrochemical system using magnesium based metal-organic framework-derived magnesium oxide anchoring in self-supporting carbon nanofiber membrane catalyst (MgO-SCM), the in situ produced NH2OH from nitrogen oxides electrocatalytic reduction coupled with aldehyde to produce 4-cyanobenzaldoxime with a selectivity of 93 % and Faraday efficiency up to 65.1 %, which further reacted with benzyl bromide to directly give oxime ether precipitate with a purity of 97 % by convenient filtering separation. The high efficiency was attributed to the ultrafine MgO nanoparticles in MgO-SCM, effectively inhibiting hydrogen evolution reaction and accelerating the production of NH2OH, which rapidly attacked carbonyl of aldehydes to form oximes, but hardly crossed the hydrogenation barrier of forming amines, thus leading to a high yield of oxime ether when coupling benzyl bromide nucleophilic reaction. This work highlights the importance of kinetic control in complex electrosynthetic organonitrogen system and demonstrates a green and safe alternative method for synthesis of organic nitrogen drug molecules.

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

CO2 Adsorption on Biomass-Derived Carbons from Albizia procera Leaves: Effects of Synthesis Strategies

CO2 capture is a useful strategy for controlling the risks associated with global warming. The design of an adsorbent is essential for clean and potentially energy-efficient adsorption-based carbon capture processes. This study reports a facile and moderately temperature single-stage combined pyrolysis and activation strategy for the synthesis of nitrogen-doped carbons for high-performance CO2 capture. Using nitrogen-rich Albizia procera leaves as the precursor and carrying out single-stage pyrolysis and activation at temperatures of 500, 600, and 700 °C in the presence NaHCO3 as an activating agent, carbons with different surface characteristics and ultrahigh weight percentage (22-25%) of nitrogen were obtained. The subtle differences in surface characteristics and nitrogen content had a bearing on the CO2 adsorption performance of the resultant adsorbents. Outstanding results were achieved, with a CO2 adsorption capacity of up to 2.5 mmol/g and a CO2 over N2 selectivities reaching 54. The isotherm results were utilized to determine the performance indicators for a practical vacuum swing adsorption process. This study provides a practical strategy for the efficient synthesis of nitrogen-doped carbons for various adsorption applications.

CO2 Adsorption on Pore-Engineered Carbons Derived from Jute Sticks

CO2 capture is a practical approach to mitigating the impacts of global warming. Adsorption-based carbon capture is a clean and potentially energy-efficient method whose performance greatly depends on adsorbent design. In this study, we explored the use of jute-derived carbon as a high-performance adsorbent for CO2 capture. The carbons were produced by pyrolyzing powdered jute sticks with NaHCO3 as an activating agent at 500-700 °C. Impressive adsorption capacities of up to 2.5 mmol ⋅ g-1 and CO2 /N2 selectivities of up to 54 were achieved by adjusting the pore size distribution and surface functionalization. Based on the isotherm results, the working capacities, regenerabilities, and potentials for CO2 separation were determined for a practical vacuum swing adsorption process. The adsorbent materials were characterized by XRD, FTIR, Raman, FESEM and N2 sorption at 77 K. This study provides a general approach for designing adsorbents for various gas-separation applications.

Dangling bond formation on COF nanosheets for enhancing sensing performances

Dangling bond formation for COF materials in a rational manner is an enormous challenge, especially through post-treatment which is a facile strategy while has not been reported yet. In this work, a "chemical scissor" strategy is proposed for the first time to rationally design dangling bonds in COF materials. It is found that Zn²⁺ coordination in post-metallization of TDCOF can act as an "inducer" which elongates the target bond and facilitates its fracture in hydrolyzation reactions to create dangling bonds. The number of dangling bonds is well-modulated by controlling the post-metallization time. Zn-TDCOF-12 shows one of the highest sensitivities to NO₂ in all reported chemiresistive gas sensing materials operating under visible light and room temperature. This work opens an avenue to rationally design a dangling bond in COF materials, which could increase the active sites and improve the mass transport in COFs to remarkably promote their various chemical applications.

TiO2@COF Nanowire Arrays: A "Filter Amplifier" Heterojunction Strategy to Reverse the Redox Nature

Surface modification is a promising method to change the surface properties of nanomaterials, but it is limited in enhancing their intrinsic redox nature. In this work, a "filter amplifier" strategy is proposed for the first time to reverse the intrinsic redox nature of materials. This is demonstrated by coating a COF-316 layer with controlled thickness on TiO₂ to form core-sheath nanowire arrays. This unique structure forms a Z-scheme heterojunction to function as "a filter amplifier" which can conceal the intrinsic oxidative sites and increase the extrinsic reductive sites. Consequently, the selective response of TiO₂ is dramatically reversed from reductive ethanol and methanol to oxidative NO₂. Moreover, TiO₂@COF-316 provides remarkably improved sensitivity, response, and recovery speed, as well as unusual anti-humidity properties as compared with TiO₂. This work not only provides a new strategy to rationally modulate the surface chemistry properties of nanomaterials but also opens an avenue to design high-performance electronic devices with a Z-scheme heterojunction.

Improved Performance of g-C3N4 for Optoelectronic Detection of NO2 Gas by Coupling Metal-Organic Framework Nanosheets with Coordinatively Unsaturated Ni(II) Sites

Sensitive and selective optoelectronic detection of NO₂ with g-C₃N₄ (CN) is critical, but it remains challenging to achieve ultralow concentration (ppb-level) detection. Herein, Ni metal-organic frameworks/CN nanosheet heterojunctions were successfully fabricated by the electrostatic induced assembly strategy and then treated by a post-alkali etching process for creating coordinatively unsaturated Ni(II) sites. The optimized heterojunction exhibits a record detection limitation of 1 ppb for NO₂, well below that observed on pristine CN, and an outstanding selectivity over other gases, along with long-time stability (120 days) at room temperature. The resulting superior detection performance benefits from the enhanced charge transfer and separation of the closely contacted heterojunction interface and the favorable adsorption of NO₂ by unsaturated Ni(II) as selective adsorption sites mainly by means of the time-resolved photoluminescence spectra and in situ X-ray photoelectron spectra. Moreover, the in situ Fourier transform infrared spectra and temperature-programmed desorption disclose that the promotion adsorption of NO₂ depends on the strengthened interaction between NO₂ and Ni(II) node sites at the aid of OH groups from unsaturated coordination. This work offers a versatile solution to develop promising CN-based optoelectronic sensors at room temperature.

Exceptionally high and reversible NOx uptake by hollow Mn-Fe composite nanocubes derived from Prussian blue analogues

Noble metal-based catalysts are widely used as passive NO_x adsorbers (PNA) for cold-start NO_x emissions; however, efficient porous materials as an alternative have great development potential. Herein, porous Mn-Fe composites with hollow nanocubes derived from Prussian blue analogue (PBA) precursors were used as PNA. The effects of O₂, the molar ratio of Mn/Fe, calcination temperature and reaction temperature on their adsorption capacity were explored. The physicochemical properties of the obtained catalysts were systematically characterized by XRD, SEM, BET surface area, TGA, XPS and DRIFT techniques. The developed Mn₁Fe₂-450 presented excellent NO_x uptake (more than 2.16 mmol g^-1 at 200 °C). Moreover, a high NO_x adsorption performance was also retained in the presence of 10% water vapor. The existing Mn³⁺ and Fe²⁺ species could contribute to the NO_x adsorption and gaseous O₂ can accelerate NO activation to form more easily adsorbed NO₂. Surface NO₂ is further diffused and stored into the bulk of the Mn-Fe composite in the form of nitrite and nitrate. This work revealed a novel candidate for PNA catalysts, which might provide inspiration for the design of new adsorbent materials.

Fully Flexible MXene-based Gas Sensor on Paper for Highly Sensitive Room-Temperature Nitrogen Dioxide Detection

Flexible chemiresistive gas sensors have attracted growing interest due to their capability in real-time and rapid detection of gas. However, the performance of gas sensors has long been hindered by the poor charge transfer ability between the conventional metal electrode and gas sensing semiconductors. Herein, for the first time, a fully flexible paper-based gas sensor integrated with the Ti₃C₂T_x-MXene nonmetallic electrode and the Ti₃C₂T_x/WS₂ gas sensing film was designed to form Ohmic contact and Schottky heterojunction in a single gas sensing channel. Ti₃C₂T_x/WS₂ has outstanding physical and chemical properties for both Ti₃C₂T_x and WS₂ nanoflakes, showing high conductivity, effective charge transfer, and abundant active sites for gas sensing. The response of the gas sensor to NO₂ (1 ppm) at room temperature is 15.2%, which is about 3.2 and 76.0 times as high as that of the Au interdigital electrode integrated with the Ti₃C₂T_x/WS₂ sensor (4.8%) and the MXene electrode integrated with the Ti₃C₂T_x sensor (0.2%), respectively. Besides, this design performed at a limit of detection with 11.0 ppb NO₂ gas and displayed excellent stability under high humidities. Based on first-principles density functional theory calculation results, the improvement of the gas sensing performance can be mainly attributed to the heterojunction regulation effect, work function matching, and suppressing metal-induced gap states. This work provides a new approach for the design of flexible gas sensors on paper with MXene-based conductive electrodes and gas sensing materials.

Adsorptive denitrogenation of model oil by MOF(Al)@GO composites: remarkable adsorption capacity and high selectivity

An as-synthesized recyclable Al-NDC@GO composite exhibited remarkable adsorption capacity and high selectivity for pyridine, quinoline and indole.

Synthesis of Nitro Compounds from Nitrogen Dioxide Captured in a Metal-Organic Framework

Increasing levels of air pollution are driving the need for the development of new processes that take "waste-to-chemicals". Herein, we report the capture and conversion under ambient conditions of a major air pollutant, NO₂, using a robust metal-organic framework (MOF) material, Zr-bptc (H₄bptc = 3,3',5,5'-biphenyltetracarboxylic acid), comprising {Zr₆(μ₃-O)₄(μ₃-OH)₄(COO)₁₂} clusters linked by 4-connected bptc^4- ligands in an ftw topology. At 298 K, Zr-bptc shows exceptional stability and adsorption of NO₂ at both low (4.9 mmol g^-1 at 10 mbar) and high pressures (13.8 mmol g^-1 at 1.0 bar), as measured by isotherm experiments. Dynamic breakthrough experiments have confirmed the selective retention of NO₂ by Zr-bptc at low concentrations under both dry and wet conditions. The immobilized NO₂ can be readily transformed into valuable nitro compounds relevant to construction, agrochemical, and pharmaceutical industries. In situ crystallographic and spectroscopic studies reveal strong binding interactions of NO₂ to the {Zr₆(μ₃-O)₄(μ₃-OH)₄(COO)₁₂} cluster node. This study paves a circular pathway to enable the integration of nitrogen-based air pollutants into the production of fine chemicals.

Solvent-controlled synthesis of Ti-based porphyrinic metal–organic frameworks for the selective photocatalytic oxidation of amines

The photocatalytic activity of metal-organic frameworks (MOFs) can be managed by the milieu of synthesis. Herein, N,N'-dimethylacetamide (DMA) and N,N'-diethylformamide (DEF) were employed as solvents for the synthesis of two Ti-based porphyrinic MOFs, namely Ti-PMOF-DMA and Ti-PMOF-DEF, from tetrabutyl orthotitanate and 4,4',4'',4'''-(porphine-5,10,15,20-tetrayl)tetrakis(benzoic acid). Notably, both DMA and DEF were adsorbed onto the Ti-oxo clusters of the two MOFs to shape their properties. Ti-PMOF-DMA was observed with better optoelectronic response and charge transfer than Ti-PMOF-DEF. Moreover, Ti-PMOF-DMA owned a larger pore volume than Ti-PMOF-DEF, imparting more accessible sites to benzyl amines. Ti-PMOF-DMA exhibited better activity in selective photocatalytic aerobic oxidation of benzylamine than Ti-PMOF-DEF. Irradiated by red light-emitting diodes, outstanding results for selective conversion of  benzyl amines to imines over Ti-PMOF-DMA were attained. Superoxide radical anion, generated by the electron transfer from porphyrin via Ti-oxo clusters to dioxygen, turned out to be the primary reactive oxygen species. There was generality towards aerobic oxidation of amines to imines and considerable stability for Ti-PMOF-DMA. This work provides a new perspective on the altering MOFs to enhance photocatalytic organic transformations.

Metal-Organic Frameworks for NOx Adsorption and Their Applications in Separation, Sensing, Catalysis, and Biology

Nitrogen oxide (NO_x ) is a family of poisonous and highly reactive gases formed when fuel is burned at high temperatures during anthropogenic behavior. It is a strong oxidizing agent that significantly contributes to the ozone and smog in the atmosphere. Thus, NO_x removal is important for the ecological environment upon which the civilization depends. In recent decades, metal-organic frameworks (MOFs) have been regarded as ideal candidates to address these issues because they form a reticular structure between proper inorganic and organic constituents with ultrahigh porosity and high internal surface area. These characteristics render them chemically adaptable for NO_x adsorption, separation, sensing, and catalysis. In additional, MOFs enable potential nitric oxide (NO) delivery for the signaling of molecular NO in the human body. Herein, the different advantages of MOFs for coping with current environmental burdens and improving the habitable environment of humans on the basis of NO_x adsorption are reviewed.

Porphyrin-Based COF 2D Materials: Variable Modification of Sensing Performances by Post-Metallization

2D nanomaterials with flexibly modifiable surfaces are highly sought after for various applications, especially in room-temperature chemiresistive gas sensing. Here, we have prepared a series of COF 2D nanomaterials (porphyrin-based COF nanosheets (NS)) that enabled highly sensitive and specific-sensing of NO₂ at room temperature. Different from the traditional 2D sensing materials, H₂ -TPCOF was designed with a largely reduced interlayer interaction and predesigned porphyrin rings as modifiable sites on its surfaces for post-metallization. After post-metallization, the metallized M-TPCOF (M=Co and Cu) showed remarkably improved sensing performances. Among them, Co-TPCOF exhibited highly specific sensing toward NO₂ with one of the highest sensitivities of all reported 2D materials and COF materials, with an ultra-low limit-of-detection of 6.8 ppb and fast response/recovery. This work might shed light on designing and preparing a new type of surface-highly-modifiable 2D material for various chemistry applications.

The low-temperature NO2 removal by tailoring metal node in porphyrin-based metal-organic frameworks

Nitrogen dioxide (NO₂) is the most toxic and prevalent form of nitrogen oxides (NO_x) pollutant and its removal from ambient air is a pressing challenge. The state-of-the-art deNO_x technologies such as selective catalytic reduction (SCR) can only work at elevated temperatures (>250-300 °C), but ineffective for the NO_x removal under ambient conditions. The adsorptive removal of NO₂ is an alternative approach to SCR, whose success depends on the design of stable adsorbents capable of selectively capturing NO₂ with a highly reversible capacity. Here we synthesized and developed five porphyrin-based metal-organic frameworks (PMOFs) as robust ambient NO₂ adsorbents, including three aluminum-based (Al-PMOF) isostructures, and two zirconium-based (Zr-PMOFs) isostructures. Of them, Al-PMOF stands out to be the most promising candidate by showing the highest NO₂ adsorption capacity (1.85 mmol/g), high stability, and good regenerability (retaining 87% capacity after five cycles of adsorption) at dry conditions. The NO₂ adsorption capacity of Al-PMOF was approximately doubled (3.61 mmol/g) at wet conditions. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed the NO₂ adsorption mechanism - the hydrogen bonding occurs between bridging hydroxyl (-OH) (attached to the metal node) and NO₂ molecules. Our work demonstrates that PMOFs are promising NO₂ adsorbents and will provide guidance for designing robust and reusable adsorbents for efficiently removing NO₂ at ambient temperature.

Toxicity assessment and underlying mechanisms of multiple metal organic frameworks using the green algae Chlamydomonas reinhardtii model

Metal-organic frameworks (MOFs) are an emerging class of materials which have garnered increasing attention for their utility as adsorbents and photocatalysts in water treatment. Nevertheless, the environmental risks of MOFs, especially their underlying impacts on aquatic organisms, are not fully explored. Herein, the toxicity of multiple representative MOFs was systematically assessed using a freshwater green alga (Chlamydomonas reinhardtii) model. Six typical MOFs with different metal nodes or organic linkers, including four transition metal incorporated aluminum-based porphyrin MOFs [pristine Al-PMOF, Al-PMOF (Cu), Al-PMOF (Ni), and Al-PMOF (Co)], one amine-functionalized MOF NH₂-MIL-125 (Ti), and one bimetallic Hofmann MOF (NiCo-PYZ), were successfully synthesized and characterized. All the tested MOFs significantly reduced the chlorophyll content and inhibited the algal growth, with the most toxic materials being NiCo-PYZ and Al-PMOF (Cu). Distinct toxic mechanisms were observed for the tested MOFs. Metal ion release was the primary cause for algal toxicity induced by NiCo-PYZ. The algal toxicity induced by porphyrin MOFs could be explained by the combined effects of metal ion release and nutrient adsorption, agglomeration and physical interactions, and reactive oxygen species generation. NH₂-MIL-125 (Ti) showed higher stability and more biocompatibility than the other tested MOFs. MOFs concentrations with no harmful effects to algae can be taken as the threshold values for safe use and discharge of MOFs. The ecotoxicological risks of MOFs should be considered as the applied concentrations of MOFs at mg/mL levels in environmental remediation were much higher than the no harmful effect thresholds.

Chrysanthemum flower like silica with highly dispersed Cu nanoparticles as a high-performance NO2 adsorbent

Atmospheric NO₂ removal is urgent and necessary due to its negative effects on the eco-system. Here we developed the chrysanthemum flower-like silica (KCC-1) loaded with highly dispersed copper nanoparticles for efficient NO₂ removal under ambient conditions. We carefully studied the NO₂ removal performance of Cu-KCC-1 materials with different copper loadings (0, 5, 10, and 15 wt%) and demonstrated the Cu⁰ nanoparticles (10 wt%) boosted the NO₂ removal capacity of KCC-1 by up to 51 times. KCC-1 loaded with 10 wt% of copper was verified to be the best-performing adsorbents, featuring an efficient NO₂ removal capacity of 3.63 mmol/g and a moderate NO release (11.3%), which was primarily attributed to the presence of Cu⁰ nanoparticles. The mechanistic study unveiled that the loaded Cu⁰ particles served as active adsorption sites for NO₂ molecules and reduced the NO₂ dissociation by covering the sites primarily responsible for NO₂ dissociation (i.e., oxygen vacancies). This work affords a promising adsorbent for NO₂ abatement under ambient conditions. The new knowledge established in developing adsorbents for NO₂ would promote future research in this emerging and niche area of air pollution control.

Hierarchically porous metal hydroxide/metal-organic framework composite nanoarchitectures as broad-spectrum adsorbents for toxic chemical filtration

We demonstrate that the hierarchically porous metal hydroxide/metal-organic framework composite nanoarchitectures exhibit broad-spectrum removal activity for three chemically distinct toxic gases, viz. acid gases, base gases, and nitrogen oxides. A facile and general in-situ hydrolysis strategy combined with gentle ambient pressure drying (APD) was utilized to integrate both Zr(OH)₄ and Ti(OH)₄ with the amino-functionalized MOF-808 xerogel (G808-NH₂). The M(OH)₄/G808-NH₂ xerogel composites manifested 3D crystalline porous networks and substantially hierarchical porosity, with controllable amounts of amorphous M(OH)₄ nanoparticles residing at the edge of xerogel particles. Microbreakthrough tests were performed under both dry and moist conditions to evaluate the filtration capabilities of the composites against three representative compounds: SO₂, NH₃, and NO₂. Compared with the pristine G808-NH₂ xerogel, the incorporation of M(OH)₄ effectively enhanced the broad-spectrum toxic chemical mitigation ability of the material, with the highest SO₂, NH₃, and NO₂ breakthrough uptake reaching 74.5, 55.3, and 394.0 mg/g, respectively. Post-breakthrough characterization confirmed the abundant M-OH groups with diverse binding configurations, alongside the unsaturated M (IV) centers on the surface of M(OH)₄ provided extra adsorption sites for irreversible toxic chemical capture besides Van der Waals driven physisorption. The ability to achieve high-capacity adsorption and strong retention for multiple contaminants is of great significance for real-world filtration applications.

Atomically Dispersed Iron Metal Site in a Porphyrin-Based Metal-Organic Framework for Photocatalytic Nitrogen Fixation

The rational design of photocatalysts for efficient nitrogen (N₂) fixation at ambient conditions is important for revolutionizing ammonia production and quite challenging because the great difficulty lies in the adsorption and activation of the inert N₂. Inspired by a biological molecule, chlorophyll, featuring a porphyrin structure as the photosensitizer and enzyme nitrogenase featuring an iron (Fe) atom as a favorable binding site for N₂via π-backbonding, here we developed a porphyrin-based metal-organic framework (PMOF) with Fe as the active center as an artificial photocatalyst for N₂ reduction reaction (NRR) under ambient conditions. The PMOF features aluminum (Al) as metal node imparting high stability and Fe incorporated and atomically dispersed by residing at each porphyrin ring promoting the adsorption and the activation of N₂, termed Al-PMOF(Fe). Compared with the pristine Al-PMOF, Al-PMOF(Fe) exhibits a substantial enhancement in NH₃ yield (635 μg g^-1_cat.) and production rate (127 μg h^-1 g^-1_cat.) of 82% and 50%, respectively, on par with the best-performing MOF-based NRR catalysts. Three cycles of photocatalytic NRR experimental results corroborate a stable photocatalytic activity of Al-PMOF(Fe). The combined experimental and theoretical results reveal that the Fe-N site in Al-PMOF(Fe) is the active photocatalytic center that can mitigate the difficulty of the rate-determining step in photocatalytic NRR. The possible reaction pathways of NRR on Al-PMOF(Fe) were established. Our study of porphyrin-based MOF for the photocatalytic NRR will provide insight into the rational design of catalysts for artificial photosynthesis.