A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.

A Review of Metal-Organic Frameworks Derived Hollow-Structured Photocatalysts: Synthesis and Applications

Photocatalysis is a most important approach to addressing global energy shortages and environmental issues due to its environmentally friendly and sustainable properties. The key to realizing efficient photocatalysis relies on developing appropriate catalysts with high efficiency and chemical stability. Among various photocatalysts, Metal-organic frameworks (MOFs)-derived hollow-structured materials have drawn increased attention in photocatalysis based on advantages like more active sites, strong light absorption, efficient transfer of pho-induced charges, excellent stability, high electrical conductivity, and better biocompatibility. Specifically, MOFs-derived hollow-structured materials are widely utilized in photocatalytic CO2 reduction (CO2RR), hydrogen evolution (HER), nitrogen fixation (NRR), degradation, and other reactions. This review starts with the development story of MOFs, the commonly adopted synthesis strategies of MOFs-derived hollow materials, and the latest research progress in various photocatalytic applications are also introduced in detail. Ultimately, the challenges of MOFs-derived hollow-structured materials in practical photocatalytic applications are also prospected. This review holds great potential for developing more applicable and efficient MOFs-derived hollow-structured photocatalysts.

Processing polymer photocatalysts for photocatalytic hydrogen evolution

Conjugated materials have emerged as competitive photocatalysts for the production of sustainable hydrogen from water over the last decade. Interest in these polymer photocatalysts stems from the relative ease to tune their electronic properties through molecular engineering, and their potentially low cost. However, most polymer photocatalysts have only been utilised in rudimentary suspension-based photocatalytic reactors, which are not scalable as these systems can suffer from significant optical losses and often require constant agitation to maintain the suspension. Here, we will explore research performed to utilise polymeric photocatalysts in more sophisticated systems, such as films or as nanoparticulate suspensions, which can enhance photocatalytic performance or act as a demonstration of how the polymer can be scaled for real-world applications. We will also discuss how the systems were prepared and consider both the benefits and drawbacks of each system before concluding with an outlook on the field of processable polymer photocatalysts.

Reinforcing Cd-S bonds through morphology engineering for enhanced intrinsic photocatalytic stability of CdS

Effectively mitigating photocorrosion is paramount for achieving high-efficiency and sustainable hydrogen production through photocatalytic water splitting over CdS. In this work, we develop a morphology engineering strategy with adjustable Cd-S bond energy through a simple chemical bath deposition method to synthesize novel hollow hemispherical CdS (H-CdS). The morphologic structure CdS can be precisely controlled by adjusting the reaction temperature, time and pH. Compared with common morphologies of CdS, H-CdS, with its reinforced Cd-S bonding, exhibits not only improved photocatalytic hydrogen evolution activity (20.04 mmol/g/h) but also exceptional resistance to photocorrosion, resulting in outstanding cyclic stability even without the aid of cocatalysts or the introduction of other semiconductors. Comprehensive characterizations reveal that the photocorrosion resistance of H-CdS stems from the high Cd-S bond strength. Moreover, in-situ infrared spectroscopy confirms alterations in the properties and activities of the various CdS morphologies after photocatalytic reaction due to photocorrosion. We thoroughly describe the relationship among morphology, surface energy, bond energy and photocorrosion resistance. Our findings present a novel strategy for mitigating the photocorrosion of CdS and offer valuable insights for future research on CdS photocatalysts aimed at stable water splitting.

Simultaneously Producing H2 and H2O2 by Photocatalytic Water Splitting: Recent Progress and Future

The solar-driven overall water splitting (2H2O→2H2 + O2) is considered as one of the most promising strategies for reducing carbon emissions and meeting energy demands. However, due to the sluggish performance and high H2 cost, there is still a big gap for the current photocatalytic systems to meet the requirements for practical sustainable H2 production. Economic feasibility can be attained through simultaneously generating products of greater value than O2, such as hydrogen peroxide (H2O2, 2H2O→H2 + H2O2). Compared with overall water splitting, this approach is more kinetically feasible and generates more high-value products of H2 and H2O2. In several years, there has been an increasing surge in exploring the possibility and substantial progress has been achieved. In this review, a concise overview of the importance and underlying principles of PIWS is first provided. Next, the reported typical photocatalysts for PIWS are discussed, including commonly used semiconductors and cocatalysts, essential design features of these photocatalysts, and connections between their structures and activities, as well as the selected approaches for enhancing their stability. Then, the techniques used to quantify H2O2 and the operando characterization techniques that can be employed to gain a thorough understanding of the reaction mechanisms are summarized. Finally, the current existing challenges and the direction needing improvement are presented. This review aims to provide a thorough summary of the most recent research developments in PIWS and sets the stage for future advancements and discoveries in this emerging area.

Ordering Bimetallic Cu-Pd Catalysts onto Orderly Mesoporous SrTiO3-Crystal Nanotubular Networks for Efficient Carbon Dioxide Photoreduction

Artificial photosynthesis of fuels has garnered significant attention, with SrTiO3 emerging as a potential candidate for photocatalysis due to its exceptional physicochemical properties. However, selectively converting CO2 into fuels with desired reaction products remains a grand challenge. Herein, we design an updated method via an aging strategy based on the electrospinning technique to synthesize a single-crystalline Al-doped SrTiO3 nanotubular networks with self-assembled orderly mesopores, further modified by Cu-Pd alloy. It exhibits both high crystallinity and superior cross-linked mesoporous structures, effectively facilitating charge carrier transfer, photon utilization, and mass transfer, with a remarkable enhancement from 0.025 mmol h-1 m-2 to 1.090 mmol h-1 m-2 in the CO production rate. Meanwhile, the ordered arrangement of Cu and Pd atoms on the (111) surface can promote the rate-determining step (*CO2 to *COOH), which is also responsible for its good activity. The presence of CuO in the reaction confers a significant advantage for CO desorption, leading to a remarkable CO selectivity of 95.54 %. This work highlights new insights into developing advanced heterogeneous photocatalysts.

Elucidating Facet-Dependent Photocatalytic Activities of Metastable CdS and Au@CdS Core-Shell Nanocrystals

Controlling the crystal facets of semiconductor nanocrystals (NCs) has been proven as an effective approach to tune their physicochemical properties. However, the study on facet-engineering of metastable zinc blende CdS (zb-CdS) and its heterostructures is still not fully explored. In this study, the zb-CdS and Au@zb-CdS core-shell NCs with tunable terminating facets are controllably synthesized, and their photocatalytic performance for water splitting are evaluated. It is found that the {111} facets of the zb-CdS NCs display higher intrinsic activity than the {100} counterparts, which originates from these surfaces being much more efficient, facilitating electron transition to enhance the adsorption ability and the dissociation of the adsorbed water, as revealed by theoretical calculations. Moreover, the Au@zb-CdS core-shell NCs exhibit better photocatalytic performance than the zb-CdS NCs terminated with the same facets under visible light irradiation (≥400 nm), which is mainly ascribed to the accelerated electron separation at the interface, as demonstrated by femtosecond transient absorption (fs-TA) spectroscopy. Importantly, the quantum yield of plasmon-induced hot electron transfer quantified by fs-TA in the Au@zb-CdS core-shell octahedrons can be reached as high as 1.2% under 615 nm excitation, which is higher than that of the Au@zb-CdS core-shell cubes. This work unravels the face-dependent photocatalytic performance of the metastable semiconductor NCs via a combination of experiments and theoretical calculations, providing the understanding of the underlying mechanism of these photocatalysts.

Best Practices for Experiments and Reports in Photocatalytic Methane Conversion

Efficiently converting methane into valuable chemicals via photocatalysis under mild condition represents a sustainable route to energy storage and value-added manufacture. Despite continued interest in this area, the achievements have been overshadowed by the absence of standardized protocols for conducting photocatalytic methane oxidation experiments as well as evaluating the corresponding performance. In this review, we present a structured solution aimed at addressing these challenges. Firstly, we introduce the norms underlying reactor design and outline various configurations in the gas-solid and gas-solid-liquid reaction systems. This discussion helps choosing the suitable reactors for methane conversion experiments. Subsequently, we offer a comprehensive step-by-step protocol applicable to diverse methane-conversion reactions. Emphasizing meticulous verification and accurate quantification of the products, this protocol highlights the significance of mitigating contamination sources and selecting appropriate detection methods. Lastly, we propose the standardized performance metrics crucial for evaluating photocatalytic methane conversion. By defining these metrics, the community could obtain the consensus of assessing the performance across different studies. Moving forward, the future of photocatalytic methane conversion necessitates further refinement of stringent experimental standards and evaluation criteria. Moreover, development of scalable reactor is essential to facilitate the transition from laboratory proof-of-concept to potentially industrial production.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

Oligo(phenylenevinylene)-Based Covalent Organic Frameworks with Kagome Lattice for Boosting Photocatalytic Hydrogen Evolution

Covalent organic frameworks (COFs) have shown great advantages as photocatalysts for hydrogen evolution. However, the effect of linkage geometry and type of linkage on the extent of π-electron conjugation in the plane of the framework and photocatalytic properties of COFs remains a significant challenge. Herein, two Kagome (kgm) topologic oligo(phenylenevinylene)-based COFs are designed and synthesized for boosting photocatalytic hydrogen evolution via a "two in one" strategy. Under visible light irradiation, COF-954 with 5 wt% Pt as cocatalyst exhibits high hydrogen evolution rate (HER) of 137.23 mmol g-1 h-1 , outperforming most reported COF-based photocatalysts. More importantly, even in natural seawater, COF-954 shows an average HER of 191.70 mmol g-1 h-1 under ultraviolet-visible (UV-vis) light irradiation. Additionally, the water-drainage experiments indoors and outdoors demonstrate that 25 and 8 mL hydrogen gas could be produced in 80 min under UV-vis light and natural sunlight, respectively, corresponding to a high HER of 167.41 and 53.57 mmol h-1 g-1 . This work not only demonstrates an effective design strategy toward highly efficient COF-based photocatalysts, but also shows the great potential of using the COF-based photocatalysts for photocatalytic hydrogen evolution.

Organometal Halide Perovskite-Based Photoelectrochemical Module Systems for Scalable Unassisted Solar Water Splitting

Despite achievements in the remarkable photoelectrochemical (PEC) performance of photoelectrodes based on organometal halide perovskites (OHPs), the scaling up of small-scale OHP-based PEC systems to large-scale systems remains a great challenge for their practical application in solar water splitting. Significant resistive losses and intrinsic defects are major obstacles to the scaling up of OHP-based PEC systems, leading to the PEC performance degradation of large-scale OHP photoelectrodes. Herein, a scalable design of the OHP-based PEC systems by modularization of the optimized OHP photoelectrodes exhibiting a high solar-to-hydrogen conversion efficiency of 10.4% is suggested. As a proof-of-concept, the OHP-based PEC module achieves an optimal PEC performance by avoiding major obstacles in the scaling up of the OHP photoelectrodes. The constructed OHP module is composed of a total of 16 OHP photoelectrodes, and a photocurrent of 11.52 mA is achieved under natural sunlight without external bias. The successful operation of unassisted solar water splitting using the OHP module without external bias can provide insights into the design of scalable OHP-based PEC systems for future practical application and commercialization.

Elucidating the mechanism of photocatalytic reduction of bicarbonate (aqueous CO2) into formate and other organics

The photocatalytic reduction of CO2 under solar irradiation is an ideal approach to mitigating global warming, and reducing aqueous forms of CO2 that interact strongly with a catalyst (e.g., HCO3-) is a promising strategy to expedite such reductions. This study uses Pt-deposited graphene oxide dots as a model photocatalyst to elucidate the mechanism of HCO3- reduction. The photocatalyst steadily catalyzes the reduction of an HCO3- solution (at pH = 9) containing an electron donor under 1-sun illumination over a period of 60 h to produce H2 and organic compounds (formate, methanol, and acetate). H2 is derived from solution-contained H2O, which undergoes photocatalytic cleavage to produce •H atoms. Isotopic analysis reveals that all of the organics formed via interactions between HCO3- and •H. This study proposes mechanistic steps, which are governed by the reacting behavior of the •H, to correlate the electron transfer steps and product formation of this photocatalysis. This photocatalysis achieves overall apparent quantum efficiency of 27% in the formation of reaction products under monochromatic irradiation at 420 nm. This study demonstrates the effectiveness of aqueous-phase photocatalysis in converting aqueous CO2 into valuable chemicals and the importance of H2O-derived •H in governing the product selectivity and formation kinetics.

Confined Heterojunction in Hollow-Structured TiO2 and Its Directed Effect in Photodriven Seawater Splitting

The high salinity of seawater often strongly affects the activity and stability of photocatalysts utilized for photodriven seawater splitting. The current investigation is focused on the photocatalyst H-TiO2/Cu2O, comprised of hydroxyl-enriched hollow mesoporous TiO2 microspheres containing incorporated Cu2O nanoparticles. The design of H-TiO2/Cu2O is based on the hypothesis that the respective hollow and mesoporous structure and hydrophilic surfaces of TiO2 microspheres would stabilize Cu2O nanoparticles in seawater and provide efficient and selective proton adsorption. H-TiO2/Cu2O shows hydrogen production performances of 45.7 mmol/(g·h) in simulated seawater and 17.9 mmol/(g·h) in natural seawater, respectively. An apparent quantum yield (AQY) in hydrogen production of 18.8% in water (and 14.9% in natural seawater) was obtained at 365 nm. Moreover, H-TiO2/Cu2O displays high stability and can maintain more than 90% hydrogen evolution activity in natural seawater for 30 h. A direct mass- and energy- transfer mechanism is proposed to clarify the superior performance of H-TiO2/Cu2O in seawater splitting.

Synergistic Trimetallic Nanocomposites as Visible-NIR-Sunlight-Driven Photocatalysts for Efficient Artificial Photosynthesis

Here, we report monodispersed tricomponent MnNSs-SnO2@Pt and MnNFs-SnO2@Pt nanocomposites prepared by simultaneous SnO2 and Pt nanodot coating on Mn nanospheres (MnNSs) and Mn nanoflowers (MnNFs) for highly efficient CO2 photoreduction in visible-NIR-sunlight irradiation. MnNFs-SnO2@Pt showed higher efficiency with a quantum yield of 3.21% and a chemical yield of 5.45% for CO2 conversion under visible light irradiation for HCOOH formation with 94% selectivity. Similarly, MnNFs-SnO2@Pt displayed significant photocatalytic efficiency in NIR and sunlight irradiation for HCOOH yield. MnNFs-SnO2@Pt nanocomposites also showed robust morphology and sustained structural stability with shelf-life for at least 1 year and were utilized for at least 10 reaction cycles without losing significant photocatalytic efficiency. The high surface area (94.98 m2/g), efficient electron-hole separation, and Pt-nanodot support in MnNFs--SnO2@Pt contributed to a higher photocatalytic efficacy toward CO2 reduction.

Replacing CC Unit with B←N Unit in Isoelectronic Conjugated Polymers for Enhanced Photocatalytic Hydrogen Evolution

Three linear isoelectronic conjugated polymers PCC, PBC, and PBN are synthesized by Suzuki-Miyaura polycondensation for photocatalytic hydrogen (H2 ) production from water. PBN presented an excellent photocatalytic hydrogen evolution rate (HER) of 223.5 µmol h-1 (AQY420  = 23.3%) under visible light irradiation, which is 7 times that of PBC and 31 times that of PCC. The enhanced photocatalytic activity of PBN is due to the improved charge separation and transport of photo-induced electrons/holes originating from the lower exciton binding energy (Eb ), longer fluorescence lifetime, and stronger built-in electric field, caused by the introduction of the polar B←N unit into the polymer backbone. Moreover, the extension of the visible light absorption region and the enhancement of surface catalytic ability further increase the activity of PBN. This work reveals the potential of B←N fused structures as building blocks as well as proposes a rational design strategy for achieving high photocatalytic performance.

In Situ Formation ZnIn2 S4 /Mo2 TiC2 Schottky Junction for Accelerating Photocatalytic Hydrogen Evolution Kinetics: Manipulation of Local Coordination and Electronic Structure

Regulating electronic structures of the active site by manipulating the local coordination is one of the advantageous means to improve photocatalytic hydrogen evolution (PHE) kinetics. Herein, the ZnIn₂ S₄ /Mo₂ TiC₂ Schottky junctions are designed to be constructed through the interfacial local coordination of In³⁺ with the electronegative O terminal group on Mo₂ TiC₂ based on the different work functions. Kelvin probe force microscopy and charge density difference reveal that an electronic unidirectional transport channel across the Schottky interface from ZnIn₂ S₄ to Mo₂ TiC₂ is established by the formed local nucleophilic/electrophilic region. The increased local electron density of Mo₂ TiC₂ inhibits the backflow of electrons, boosts the charge transfer and separation, and optimizes the hydrogen adsorption energy. Therefore, the ZnIn₂ S₄ /Mo₂ TiC₂ photocatalyst exhibits a superior PHE rate of 3.12 mmol g^-1 h^-1 under visible light, reaching 3.03 times that of the pristine ZnIn₂ S₄ . This work provides some insights and inspiration for preparing MXene-based Schottky catalysts to accelerate PHE kinetics.

Metal-Free 2D/2D van der Waals Heterojunction Based on Covalent Organic Frameworks for Highly Efficient Solar Energy Catalysis

Covalent organic frameworks (COFs) have emerged as a kind of rising star materials in photocatalysis. However, their photocatalytic activities are restricted by the high photogenerated electron-hole pairs recombination rate. Herein, a novel metal-free 2D/2D van der Waals heterojunction, composed of a two-dimensional (2D) COF with ketoenamine linkage (TpPa-1-COF) and 2D defective hexagonal boron nitride (h-BN), is successfully constructed through in situ solvothermal method. Benefitting from the presence of VDW heterojunction, larger contact area and intimate electronic coupling can be formed between the interface of TpPa-1-COF and defective h-BN, which make contributions to promoting charge carriers separation. The introduced defects can also endow the h-BN with porous structure, thus providing more reactive sites. Moreover, the TpPa-1-COF will undergo a structural transformation after being integrated with defective h-BN, which can enlarge the gap between the conduction band position of the h-BN and TpPa-1-COF, and suppress electron backflow, corroborated by experimental and density functional theory calculations results. Accordingly, the resulting porous h-BN/TpPa-1-COF metal-free VDW heterojunction displays outstanding solar energy catalytic activity for water splitting without co-catalysts, and the H2 evolution rate can reach up to 3.15 mmol g-1 h-1, which is about 67 times greater than that of pristine TpPa-1-COF, also surpassing that of state-of-the-art metal-free-based photocatalysts reported to date. In particular, it is the first work for constructing COFs-based heterojunctions with the help of h-BN, which may provide new avenue for designing highly efficient metal-free-based photocatalysts for H2 evolution.

Hierarchically Porous Few-Layer Carbon Nitride and Its High H+ Selectivity for Efficient Photocatalytic Seawater Splitting

Photocatalysts for seawater splitting are severely restricted because of the presence of multiple types of ions in seawater that cause corrosion and deactivation. As a result, new materials that promote adsorption of H⁺ and hinder competing adsorption of metal cations should enhance utilization of photogenerated electrons on the catalyst surface for efficient H₂ production. One strategy to design advanced photocatalysts involves introduction of hierarchical porous structures that enable fast mass transfer and creation of defect sites that promote selective hydrogen ion adsorption. Herein, we used a facile calcination method to fabricate the macro-mesoporous C₃N₄ derivative, V_N-HCN, that contains multiple nitrogen vacancies. We demonstrated that V_N-HCN has enhanced corrosion resistance and elevated photocatalytic H₂ production performance in seawater. Experimental results and theoretical calculations reveal that enhanced mass and carrier transfer and selective adsorption of hydrogen ions are key features of V_N-HCN that lead to its high seawater splitting activity.

Construction of Robust Iridium(III) Complex-Based Photosensitizer for Boosting Hydrogen Evolution

Developing a photosensitizer with high efficiency and long-term stability for photocatalytic hydrogen evolution is highly desirable yet remains a challenge. Herein, a novel Ir(III) complex-based photosensitizer (Ir3) bearing coumarin and triphenylamine groups is designed. Ir3 exhibits record activity and durability among reported transition metal complexes for photocatalytic hydrogen evolution, with a TON of 198,363 and a duration of 214 h. The excellent photocatalytic performance of Ir3 can be attributed to the synergistic effect of coumarin and triphenylamine, which improves the visible light absorption, charge separation, and electron transfer capacity of photosensitizers. This is an efficient and long-lived Ir(III) photosensitizer constructed on the basis of a synergistic approach, which could provide a new insight for the development of high-performance Ir(III) photosensitizers at the molecular level.

Sulfur Substitution and Defect Engineering in an Unfavored MnMoO4 Catalyst for Efficient Hydrogen Evolution under Visible Light

A novel and nonstoichiometric Mn_1-xMo(S,O)_4-y oxysulfide catalyst with oxygen vacancies and a partial Mo⁶⁺-to-Mo⁴⁺ transition after the substitution of sulfur was synthesized for an efficient photocatalytic hydrogen evolution reaction (PHER). With appropriate sulfur substitution, a MnMoO₄ semiconductor with a wide band gap was converted to Mn_1-xMo(S,O)_4-y with a narrow gap and a suitable band position for PHER. MnMo oxysulfide of 50 mg achieved a high PHER rate of 415.8 μmol/h under visible light, an apparent quantum efficiency (AQE) of 4.31% at 420 nm, and a solar-to-hydrogen (STH) conversion efficiency of 1.28%. Oxygen vacancies (V_O) surrounded by low coordination metal atoms act as active reaction sites, which strengthen water adsorption and activation. Here, we demonstrate that sulfur substitution of MnMoO₄ for lowering its wide band gap can not only disturb the strict periodicity of the lattice but also the valence states of Mn and Mo for enhancing PHER via material design.

More Accurate Method for Evaluating the Activity of Photocatalytic Hydrogen Evolution and Its Reaction Kinetics Equation

Photocatalytic water splitting to hydrogen is a sustainable energy conversion method. However, there is a lack of sufficiently accurate measurement methods for an apparent quantum yield (AQY) and a relative hydrogen production rate (r_H2) at the moment. Thus, a more scientific and reliable evaluation method is highly required to allow the quantitative comparison of photocatalytic activity. Herein, a simplified kinetic model of photocatalytic hydrogen evolution was established, the corresponding photocatalytic kinetic equation was deduced, and a more accurate calculation method is proposed for the AQY and the maximum hydrogen production rate v_H2,max. At the same time, new physical quantities, absorption coefficient k_L and specific activity SA, were proposed to sensitively characterize the catalytic activity. The scientificity and practicality of the proposed model and the physical quantities were systematically verified from the theoretical and experimental levels.

Decoupled Artificial Photosynthesis

Natural photosynthesis (NP) generates oxygen and carbohydrates from water and CO₂ utilizing solar energy to nourish lives and balance CO₂ levels. Following nature, artificial photosynthesis (AP), typically, overall water or CO₂ splitting, produces fuels and chemicals from renewable energy. However, hydrogen evolution or CO₂ reduction is inherently coupled with kinetically sluggish water oxidation, lowering efficiencies and raising safety concerns. Decoupled systems have thus emerged. In this review, we elaborate how decoupled artificial photosynthesis (DAP) evolves from NP and AP and unveil their distinct photoelectrochemical mechanisms in energy capture, transduction and conversion. Advances of AP and DAP are summarized in terms of photochemical (PC), photoelectrochemical (PEC), and photovoltaic-electrochemical (PV-EC) catalysis based on material and device design. The energy transduction process of DAP is emphasized. Challenges and perspectives on future researches are also presented.

CdSe-Decorated Flowerlike CaMoO4 Microspheres with Enhanced Hydrogen Production Activity

Photocatalytic hydrogen production technology from water is a more effective and promising method to solve energy and environmental crises. In this work, flowerlike CaMoO₄ microspheres were successfully synthesized by an ultrasonic precipitation method and modified with variable concentrations of CdSe NCs. CdSe/CaMoO₄ microspheres showed increased light absorption ability, larger relative surface area, lower electrochemical impedance, and longer fluorescence lifetime. The photocatalytic hydrogen production rate of CdSe/CaMoO₄ microspheres could reach up to 10 162.33 μmol g^-1 h^-1. The constructed type-I heterostructure improved the separation of photogenerated electrons and inhibited the rapid recombination of photogenerated electrons and holes, thus enhancing the photocatalytic hydrogen production performance. CdSe/CaMoO₄ with high hydrogen production activity would be an efficient photocatalyst for hydrogen production applications.

Improved carrier dynamics in nickel/urea-functionalized carbon nitride for ethanol photoreforming

Photoreforming has been shown to accelerate the H₂ evolution rate compared to water splitting due to thermodynamically favorable organic oxidation. In addition, the potential to simultaneously produce solar fuel and value-added chemicals is a significant benefit of photoreforming. To achieve an efficient and economically viable photoreforming process, the selection and design of an appropriate photocatalyst is essential. Carbon nitride is promising as a metal-free photocatalyst with visible light activity, high stability, and low fabrication cost. However, it typically exhibits poor photogenerated charge carrier dynamics, thereby resulting in low photocatalytic performance. Herein, we demonstrate improved carrier dynamics in urea-functionalized carbon nitride with in situ photodeposited Ni cocatalyst (Ni/Urea-CN) for ethanol photoreforming. In the presence of 1 mM Ni²⁺ precursor, an H₂ evolution rate of 760.5 µmol h^-1 g^-1 and an acetaldehyde production rate of 888.2 µmol h^-1 g^-1 were obtained for Ni/Urea-CN. The enhanced activity is ascribed to the significantly improved carrier dynamics in Urea-CN. The ability of oxygen moieties in the urea group to attract electrons and to increase the hole mobility via a positive shift in the valence band promotes an improvement in the overall carrier dynamics. In addition, high crystallinity and specific surface area of the Urea-CN contributed to accelerating charge separation and transfer. As a result, the electrons were efficiently transferred from Urea-CN to the Ni cocatalyst for H₂ evolution while the holes were consumed during ethanol oxidation. The work demonstrates a means by which carrier dynamics can be tuned by engineering carbon nitride via edge functionalization.

Segmented Structure Design of Carbon Ring In-Plane Embedded in g-C3 N4 Nanotubes for Ultra-High Hydrogen Production

The photocatalytic water splitting capability of metal-free graphitic carbon nitride (g-C₃ N₄ ) photocatalyst is determined by its microstructure and photoexcited electrons transfer. Herein, a segmented structure was developed, consisting of alternant g-C₃ N₄ nanotubes and graphitic carbon rings (denoted as C_r -CN-NT). The C_r -CN-NT showed ordered structure and ultralong length/diameter ratio of 150 nm in diameter and a few microns in lengths, which promoted electron transport kinetics and elongated photocarrier diffusion length and lifetime. Meanwhile, the local in-plane π-conjugation was formed and extended in C_r -CN-NT, which could improve charge carrier density and prohibit electron-hole recombination. Accordingly, the average hydrogen evolution rate of C_r -CN-NT reached 9245 μmol h^-1  g^-1 , which was 61.6 times that of pristine CN, and the remarkable apparent quantum efficiency (AQE) of C_r -CN-NT reached up to 12.86 % at 420 nm. This work may provide a pathway for simultaneous morphology regulation and in-plane modification of high-performance photocatalysts.

Morphology Genetic Metal-Organic Frameworks-Based Biocomposites for Efficient Photocatalytic Hydrogen Evolution

Metal-organic frameworks (MOFs), MIL-125 and UiO-66, were modified on the butterfly wings (BWs) by chemical bonds, and CdS was grown in situ on them through a solvothermal approach. The BWs enable the biocomposites to possess a wider (>600 nm) and stronger light absorption. The in situ growth method can produce highly active and stable biocomposites. These novel morphologic MOF/CdS biocomposites were characterized using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and so on. The resulting composites were tested for photocatalytic hydrogen production through water splitting with platinum and lactic acid as the co-catalyst and sacrificial agent, respectively. The two samples showed higher activity than bulk CdS, MOFs, or their composites. Therefore, this paper provides an appropriate method to obtain the MOF/CdS biocomposites, and the resulting biocomposites are proved to be efficient catalyst systems for hydrogen evolution from water under visible light with a wider wavelength.

Recent advances and perspectives for solar-driven water splitting using particulate photocatalysts

The conversion and storage of solar energy to chemical energy via artificial photosynthesis holds significant potential for optimizing the energy situation and mitigating the global warming effect. Photocatalytic water splitting utilizing particulate semiconductors offers great potential for the production of renewable hydrogen, while this cross-road among biology, chemistry, and physics features a topic with fascinating interdisciplinary challenges. Progress in photocatalytic water splitting has been achieved in recent years, ranging from fundamental scientific research to pioneering scalable practical applications. In this review, we focus mainly on the recent advancements in terms of the development of new light-absorption materials, insights and strategies for photogenerated charge separation, and studies towards surface catalytic reactions and mechanisms. In particular, we emphasize several efficient charge separation strategies such as surface-phase junction, spatial charge separation between facets, and polarity-induced charge separation, and also discuss their unique properties including ferroelectric and photo-Dember effects on spatial charge separation. By integrating time- and space-resolved characterization techniques, critical issues in photocatalytic water splitting including photoinduced charge generation, separation and transfer, and catalytic reactions are analyzed and reviewed. In addition, photocatalysts with state-of-art efficiencies in the laboratory stage and pioneering scalable solar water splitting systems for hydrogen production using particulate photocatalysts are presented. Finally, some perspectives and outlooks on the future development of photocatalytic water splitting using particulate photocatalysts are proposed.

Preparation, characterization, evaluation and mechanistic study of organic polymer nano-photocatalysts for solar fuel production

This review provides the guidelines and knowledge gained so far on current strategies used to prepare, optimize and investigate polymer nanoparticles for fuel production, highlighting the future directions of polymer nano-photocatalyst development.

Design of well-defined shell-core covalent organic frameworks/metal sulfide as an efficient Z-scheme heterojunction for photocatalytic water splitting

Development of a covalent-organic framework (COF)-based Z-scheme heterostructure is a promising strategy for solar energy driven water splitting, but the construction of a COF-based Z-scheme heterostructure with well-defined architecture, large contact area and intimate contact interfaces is scarce. Herein, we fabricated a direct Z-scheme heterostructure COF-metal sulfide hybrid (T-COF@CdS) with shell-core architecture by self-polymerization of 1,3,5-benzenetricarboxaldehyde and 2,4,6-tris(4-aminophenyl)-1,3,5-triazine in situ on CdS. The formed C-S chemical bonding between T-COF and CdS could provide a very tight and stable interface. Owing to the properly staggered band alignment, strong interfacial interaction and large interfacial contact area between T-COF and CdS, a Z-scheme route for charge separation and transfer is realized, resulting in electron accumulation in CdS for H2O reduction. The obtained Z-scheme heterostructure T-COF@CdS-3 exhibits a high apparent quantum efficiency of 37.8% under 365 nm monochromatic light irradiation, and long-term stability arising from shell-core structures in which the T-COF shell protects the catalytic centers of CdS against deactivation, as well as acts as oxidation sites to avoid the photocorrosion of CdS. This work provides a strategy for the construction of a shell-core direct Z-scheme heterostructure photocatalyst for water splitting with high performance.

Increased production of H2 under visible light by packing CdS in a Ti, Zr-Based metal organic framework

Metal organic frameworks (MOFs) are crystalline porous materials, and some of them have been used as photocatalysts for H₂ production in the presence of Pt and sacrificial reagents. Herein we report a significantly enhanced production of H₂ on mixed CdS and MOF, measured under a 420 nm LED lamp in a N₂-saturated aqueous solution containing Na₂S and Na₂SO₃. MIL-125-NH₂, UiO-66-NH₂, and PCN-415-NH₂, which are Ti-, Zr-, and Ti, Zr-based MOFs, respectively, were prepared, followed by a two-step precipitation of CdS. All MOFs were nearly not active, but CdS-loaded MOFs were not only active, but also more active than either CdS or Pt/CdS. Moreover, at 40% CdS loading, the MOF activity was PCN-415-NH₂ > MIL-125-NH₂ > UiO-66-NH₂. N₂ adsorption showed that CdS nanoparticles were present in the micropores of MOFs. Then the solid photoluminescence, band parameters, and (photo)electrochemical reactions were measured. Accordingly, a possible mechanism is proposed, involving the electron transfer from CdS to PCN-415-NH₂, and the hole transfer from PCN-415-NH₂ to CdS. In the reaction process, both CdS and MOF act as photocatalysts, other than co-catalysts. This work shows a simply strategy for enhancing H₂ production under visible light.

Ag-In-Zn-S Quantum Dot-Dominated Interface Kinetics in Ag-In-Zn-S/NiFe LDH Composites toward Efficient Photoassisted Electrocatalytic Water Splitting

Photoassisted electrocatalysis (P-EC) emerges as a rising star for hydrogen production by embedding photoactive species in electrocatalysts, for which the interfacial structure design and charge transfer kinetics of the multifunctional catalysts remain a great challenge. Herein, Zn-AgIn₅S₈ quantum dots (ZAIS QDs) were embedded into 2D NiFe layered double hydroxide nanosheets through a simple hydrothermal treatment to form 0D/2D composite catalysts for P-EC. With evidence from transient photovoltage spectroscopy, we acquired a clear and fundamental understanding on the kinetics of charge extraction time and extraction amount in the 0D/2D heterojunctions that was proved to play a key role in P-EC. Upon light illumination, for HER, the optimized NiFe-ZAIS exhibits obviously reduced overpotentials of 129 and 242 mV at current densities of 10 and 50 mA cm^-2, which are 22 and 33 mV lower than those of dark electrocatalysis, respectively. For OER, the NiFe-ZAIS electrode also shows low overpotentials of 220 and 268 mV at current densities of 10 and 50 mA cm^-2, respectively, under light illumination, which were able to almost double the intrinsic activity. Finally, with NF@NiFe-ZAIS as both the cathode and the anode, the assembled electrolyzer only requires 1.62 V to reach the overall water splitting current density of 10 mA cm^-2 under P-EC. This work provides a useful example for the profound understanding of the design and the kinetics study of multifunctional P-EC catalysts.

Identification of deactivation-resistant origin of In(OH)3 for efficient and durable photodegradation of benzene, toluene and their mixtures

Aromatic hydrocarbon is a representative type of VOCs, which causes adverse effects to human health. The degradation stability of aromatic hydrocarbon is of vital importance to commercializing a photocatalyst for its practical application. The most commonly used titanium dioxide photocatalyst (P25) was deactivated rapidly in the photocatalytic VOCs degradation process. In this work, the indium hydroxide (In(OH)₃) photocatalyst was developed, which exhibited not only higher efficient activity but also ultra-stable stability for degradation of benzene, toluene and their mixtures. The origin of the activity difference between two catalysts was investigated by combined experimental and theoretical ways. Based on in situ DRIFTS and GC-MS, it was revealed that benzoic acid and carbonaceous byproducts were specifically formed and accumulated on P25, which were responsible for deactivation of photocatalyst. In contrast, as revealed by both DFT calculations and experimental results, the reaction pathway with byproducts blocking the active sites can be thermodynamically avoided on In(OH)₃. This rendered high durability to In(OH)₃ photocatalyst in degradations of aromatic pollutants. The elucidation of deactivation-resistant effect and reaction mechanism as an ideal photocatalyst for practical usage were provided.

Unique ternary Ni-MOF-74/Ni2P/MoSx composite for efficient photocatalytic hydrogen production: Role of Ni2P for accelerating separation of photogenerated carriers

A reasonable introduction of MOFs-derived Ni₂P with high dispersity is a valid way to reduce the recombination rate of photogenerated electron-holes, thus for more effective visible-light-driven water splitting. In this study, Ni-MOF-74/Ni₂P precursor was obtained by low-temperature phosphating method. A ternary heterojunction Ni-MOF-74/Ni₂P/MoS_x with a unique structure is obtained by a solution-based mixing method. The unique structure of Ni-MOF-74/Ni₂P provides advantages for MoS_x load. The UV-visible diffuse reflectance spectroscopy proves that the introduction of Ni₂P improves the utilization of visible light by the composite catalyst 10%-NPMS and promotes more electrons generation, thereby improving photocatalytic hydrogen production activity. It is proved that the introduced Ni₂P can accelerate the separation of photogenerated carriers by characterization (PL, EIS, LSV, etc.) analyses. The composite catalyst 10%-NPMS with the best hydrogen production activity was obtained by adjusting the ratio between Ni-MOF-74/Ni₂P and MoS_x. The photocatalytic hydrogen evolution of the composite catalyst 10%-NPMS (286.16 μmol) is 28.30, 2.78, 3.79 and 2.41 times that of pure Ni-MOF-74, Ni₂P, MoS_x and binary 10%-Ni-MOF-74/MoS_x within 5 h, respectively. And the hybrid 10%-Ni-MOF-74/Ni₂P/MoS_x exhibits excellent photocatalytic hydrogen evolution performance and good stability. This research will provide a new strategy for synthesizing unique ternary composite materials by using metal organic framework materials as precursors.

Y2O3:Yb3+, Tm3+/ZnO composite with a heterojunction structure and upconversion function for the photocatalytic degradation of organic dyes

Endowing photocatalytic materials with a broader range of light responses is important for improving their performance and solar energy utilization. In this study, a simple sol-gel method was used to prepare Yb³⁺/Tm³⁺-co-doped Y₂O₃ upconversion materials and Y₂O₃:Yb³⁺, Tm³⁺/ZnO (Y/Z) composite photocatalysts for the photocatalytic degradation of dyes. The Y/Z composite photocatalyst achieved degradation rates of 38%, 95%, and 89% for methyl orange, methylene blue (MB), and acid chrome blue K dye solutions, respectively, within 30 minutes. The degradation efficiency for MB after three cycles of degradation was 86%. The spherical Y₂O₃:Yb³⁺, Tm³⁺ particles had diameters of 20-50 nm and attached to the ZnO nanosheets, forming a heterojunction structure with ZnO. Fluorescence spectroscopy showed that Y₂O₃:Yb³⁺, Tm³⁺ could convert near-infrared (NIR) light into three sets of ultraviolet light (290, 320, and 360 nm) under NIR excitation. Photoluminescence spectroscopy demonstrated that the photogenerated electron-hole pair recombination probability of the composite photocatalyst was significantly lower than that of ZnO nanosheets, thereby reducing the energy loss during the migration process. Furthermore, the addition of Y₂O₃:Yb³⁺, Tm³⁺ to ZnO substantially improved the absorption capacity for ultraviolet light, which enhanced the photocatalytic activity. A possible mechanism for the enhanced photocatalytic performance of the Y/Z composites was proposed based on the synergistic effect of heterojunction formation and the photoconversion process. The composite photocatalyst with upconversion characteristics and heterogeneous structure provides a new strategy for removing organic pollutants from water.