Size‐Dependent Activity and Selectivity of Atomic‐Level Copper Nanoclusters during CO/CO 2 Electroreduction

Bioinspired molecule-functionalized Cu with high CO adsorption for efficient CO electroreduction to acetate

Electrochemical reduction of carbon dioxide (CO2) or carbon monoxide (CO) to valuable multi-carbon (C2+) products like acetate is a promising approach for a sustainable energy economy. However, it is still challenging to achieve high activity and selectivity for acetate production, especially in neutral electrolytes. Herein, a bioinspired hemin/Cu hybrid catalyst was developed to enhance the surface *CO coverage for highly efficient electroreduction of CO to acetate fuels. The hemin/Cu electrocatalyst exhibits a remarkable faradaic efficiency of 45.2% for CO-to-acetate electroreduction and a high acetate partial current density of 152.3 mA cm-2. Furthermore, the developed hybrid catalyst can operate stably at 200 mA cm-2 for 14.6 hours, producing concentrated acetate aqueous solutions (0.235 M, 2.1 wt%). The results of in situ Raman spectroscopy and theoretical calculations proved that the Fe-N4 structure of hemin could enhance the CO adsorption and enrich the local concentration of CO, thereby improving C-C coupling for acetate production. In addition, compared to the unmodified Cu catalysts, the Cu catalysts functionalized with cobalt phthalocyanine with a Co-N4 structure also exhibit improved acetate performance, proving the universality of this bioinspired molecule-enhanced strategy. This work paves a new way to designing bioinspired electrolysis systems for producing specific C2+ products from CO2 or CO electroreduction.

Advances and challenges in the electrochemical reduction of carbon dioxide

The electrocatalytic carbon dioxide reduction reaction (ECO2RR) is a promising way to realize the transformation of waste into valuable material, which can not only meet the environmental goal of reducing carbon emissions, but also obtain clean energy and valuable industrial products simultaneously. Herein, we first introduce the complex CO2RR mechanisms based on the number of carbons in the product. Since the coupling of C-C bonds is unanimously recognized as the key mechanism step in the ECO2RR for the generation of high-value products, the structural-activity relationship of electrocatalysts is systematically reviewed. Next, we comprehensively classify the latest developments, both experimental and theoretical, in different categories of cutting-edge electrocatalysts and provide theoretical insights on various aspects. Finally, challenges are discussed from the perspectives of both materials and devices to inspire researchers to promote the industrial application of the ECO2RR at the earliest.

Bridging Nickel-MOF and Copper Single Atoms/Clusters with H-Substituted Graphdiyne for the Tandem Catalysis of Nitrate to Ammonia

Interfacial engineering of synergistic catalysts is one of the keys to achieving multiple proton-coupled electron transfer processes in nitrate-to-ammonia conversion. Herein, by joining ultrathin nickel-based metal-organic framework (denoted Ni-MOF) nanosheets with few-layered hydrogen-substituted graphdiyne-supported copper single atoms and clusters (denoted HsGDY@Cu), a tandem catalyst of Ni-MOFs@HsGDY@Cu with dual-active interfaces was developed for the concerted catalysis of nitrate-to-ammonia. In such a system, the sandwiched HsGDY layer could serve as a bridge to connect the coordinated unsaturated Ni2+ sites with Cu single atoms/clusters in a limited range of 0 to 3.6 nm. From Ni2+ to Cu, via the hydrogen spillover process, the hydrogen radicals (H⋅) generated at the unsaturated Ni2+ sites could migrate across HsGDY to the Cu sites to participate in the transformation of *HNO3 to NH3. From Cu to Ni2+, bypassing the higher reaction energy for *HNO3 formation on the Ni2+ sites, the NO2 - detached from the Cu sites could diffuse onto the unsaturated Ni2+ sites to form NH3 as well. The combined results make this hybrid a tandem catalyst with dual active sites for the catalysis of nitrate-to-ammonia conversion with improved Faradaic efficiency at lower overpotentials.

Discriminating the Active Ru Species Towards the Selective Generation of Singlet Oxygen from Peroxymonosulfate: Nanoparticles Surpass Single-Atom Catalysts

Singlet oxygen (1O2) is an exceptional reactive oxygen species in advanced oxidation processes for environmental remediation. Despite single-atom catalysts (SACs) representing the promising candidate for the selective generation of 1O2 from peroxymonosulfate (PMS), the necessity to meticulously regulate the coordination environment of metal centers poses a significant challenge in the precisely-controlled synthetic method. Another dilemma to SACs is their high surface free energy, which results in an inherent tendency for the surface migration and aggregation of metal atoms. We here for the first time reported that Ru nanoparticles (NPs) synthesized by the facile pyrolysis method behave as robust Fenton-like catalysts, outperforming Ru SACs, towards efficient activation of PMS to produce 1O2 with nearly 100 % selectivity, remarkably improving the degradation efficiency for target pollutants. Density functional theory calculations have unveiled that the boosted PMS activation can be attributed to two aspects: (i) enhanced adsorption of PMS molecules onto Ru NPs, and (ii) decreased energy barriers by offering adjacent sites for promoted dimerization of *O intermediates into adsorbed 1O2. This study deepens the current understanding of PMS chemistry, and sheds light on the design and optimization of Fenton-like catalysts.

Promoting CO2 Electroreduction to Ethane by Iodide-Derived Copper with the Hydrophobic Surface

Electrochemical reduction of CO2 to value-added products provides a feasible pathway for mitigating net carbon emissions and storing renewable energy. However, the low dimerization efficiency of the absorbed CO intermediate (*CO) and the competitive hydrogen evolution reaction hinder the selective electroreduction of CO2 to ethane (C2H6) with a high energy density. Here, we designed hydrophobic iodide-derived copper electrodes (I-Cu/Nafion) for reducing CO2 to C2H6. The Faradaic efficiency of C2H6 reached 23.37% at -0.7 V vs RHE over the I-Cu/Nafion electrode in an H-type cell, which was about 1.7 times higher than that of the I-Cu electrode. The hydrophobic properties of the I-Cu/Nafion electrodes led to an increase in the local CO2 concentration and stabilized the Cu+ species. In situ Raman characterizations and density functional theory calculations indicate that the enhanced performances could be ascribed to the strong *CO adsorption and decreased the formation energy of *COOH and *COCOH intermediates. This study highlights the effect of the hydrophobic surface on Cu-based catalysts in the electroreduction of CO2 and provides a promising way to adjust the selectivity of C2 products.

Anionic Coordination Control in Building Cu-Based Electrocatalytic Materials for CO2 Reduction Reaction

Renewable energy-driven conversion of CO2 to value-added fuels and chemicals via electrochemical CO2 reduction reaction (CO2RR) technology is regarded as a promising strategy with substantial environmental and economic benefits to achieve carbon neutrality. Because of its sluggish kinetics and complex reaction paths, developing robust catalytic materials with exceptional selectivity to the targeted products is one of the core issues, especially for extensively concerned Cu-based materials. Manipulating Cu species by anionic coordination is identified as an effective way to improve electrocatalytic performance, in terms of modulating active sites and regulating structural reconstruction. This review elaborates on recent discoveries and progress of Cu-based CO2RR catalytic materials enhanced by anionic coordination control, regarding reaction paths, functional mechanisms, and roles of different non-metallic anions in catalysis. Finally, the review concludes with some personal insights and provides challenges and perspectives on the utilization of this strategy to build desirable electrocatalysts.

Doping effect on a two-electron silver nanocluster

This study investigates the effects of metal addition and doping of a 2-electron silver superatom, [Ag10{S2P(OiPr)2}8] (Ag10). When Ag+ is added to Ag10 in THF solution, [Ag11{S2P(OiPr)2}8(OTf)] (Ag11) is rapidly formed almost quantitatively. When the same method is used with Cu+, a mixture of alloys, [CuxAg11-x{S2P(OiPr)2}8]+ (x = 1-3, CuxAg11-x), is obtained. In contrast, introducing Au+ to Ag10 leads to decomposition. The structural and compositional analysis of Ag11 was characterized by single-crystal X-ray diffraction (SCXRD), ESI-MS, NMR spectroscopy, and DFT calculations. While no crystal structure was obtained for CuxAg11-x, DFT calculations provide insights into potential sites for copper location. The absorption spectrum exhibits a notable blue shift in the low-energy band after copper doping, contrasting with that of the slight shift observed in 8-electron Cu-doped Ag nanoclusters. Ag11 and CuxAg11-x are strongly emissive at room temperature, and solvatochromism across different organic solvents is highlighted. This study underscores the profound influence of metal addition and doping on the structural and optical properties of silver nanoclusters, providing important contributions to understanding the nanoclusters and their photophysical behaviors.

Experimental Demonstration of Topological Catalysis for CO2 Electroreduction

The past decade has witnessed substantial progress in understanding nontrivial band topology and discovering exotic topological materials in condensed-matter physics. Recently, topological physics has been further extended to the chemistry discipline, leading to the emergence of topological catalysis. In principle, the topological effect is detectable in catalytic reactions, but no conclusive evidence has been reported yet. Herein, by precisely manipulating the topological surface state (TSS) of Bi2Se3 nanosheets through thickness control and the application of a magnetic field, we provide direct experimental evidence to illustrate topological catalysis for CO2 electroreduction. With and without the cooperation of TSS, CO2 is mainly reduced into liquid fuels (HCOOH and H2C2O4) and CO, exhibiting high (up to 90% at -1.1 V versus reversible hydrogen electrode) and low Faradaic efficiency (FE), respectively. Theoretically, the product and FE difference can be attributed to the TSS-regulated adsorption of key intermediates and the reduced barrier of the potential-determining step. Our work demonstrates the inherent correlation between band topology and electrocatalysis, paving a new avenue for designing high-performance catalysts.

Emerging Xene-Based Single-Atom Catalysts: Theory, Synthesis, and Catalytic Applications

In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.

High stability copper clusters anchored on N-doped carbon nanosheets for efficient CO2 electroreduction to HCOOH

Cu-based nanomaterials is crucial for electrochemical CO2 reduction reaction (CO2RR), but they inevitably undergo performance degradation due to structural self-reconstruction at a large current density during CO2RR. Here, we developed a pre-synthetic atomically dispersed Cu source strategy to fabricate a catalyst of stable Cu clusters anchored on N-doped carbon nanosheets (c-Cu/NC), which exhibited an exceptional electroreduction for CO2 to HCOOH with a Faradaic efficiency of up to 96.2 % at current density of 276.4 mA cm-2 at - 0.96 V vs. RHE, which surpasses most reported catalysts. Especially, there was no any decay in stability during a 100 h continuous test, attributed to a strong interaction of Cu-C for restraining its self-reconstruction during CO2RR. DFT calculations indicated that N-doped carbon can strongly stabilize Cu clusters for keeping stability and cause the downshift of d-band center of Cu on c-Cu/NC for reducing the desorption energy between c-Cu/NC and OCHO* intermediates. This work provides an effective way to construct stable Cu clusters catalysts, and unveil the origin of catalyticmechanism over Cu clusters anchored on N-doped carbon towards electrochemical conversion ofCO2 to HCOOH.

Reversible Structural Evolution of Metal-Nitrogen-Doped Carbon Catalysts During CO2 Electroreduction: An Operando X-ray Absorption Spectroscopy Study

Electrochemical CO2 reduction (CO2 RR) is a rising technology, aiming to reduce the energy sector dependence on fossil fuels and to produce carbon-neutral raw materials. Metal-nitrogen-doped carbons (M-N-C) are emerging, cost-effective catalysts for this reaction; however, their long-term stability is a major issue. To overcome this, understanding their structural evolution is crucial, requiring systematic in-depth operando studies. Here a series of M-N-C catalysts (M = Fe, Sn, Cu, Co, Ni, Zn) is investigated using operando X-ray absorption spectroscopy. It is found that the Fe-N-C and Sn-N-C are prone to oxide clusters formation even before CO2 RR. In contrast, the respective metal cations are singly dispersed in the as-prepared Cu-N-C, Co-N-C, Ni-N-C, and (Zn)-N-C. During CO2 RR, metallic clusters/nanoparticles reversibly formed in all catalysts, except for the Ni-N-C. This phenomenon, previously observed only in Cu-N-C, thus is ubiquitous in M-N-C catalysts. The competition between M-O and M-N interactions is an important factor determining the mobility of metal species in M-N-C. Specifically, the strong interaction between the Ni centers and the N-functional groups of the carbon support results in higher stability of the Ni single-sites, leading to the excellent performance of Ni-N-C in the CO2 to CO conversion, in comparison to other transition metals.

Construction of Low-Coordination Cu-C2 Single-Atoms Electrocatalyst Facilitating the Efficient Electrochemical CO2 Reduction to Methane

Constructing Cu single-atoms (SAs) catalysts is considered as one of the most effective strategies to enhance the performance of electrochemical reduction of CO2 (e-CO2 RR) towards CH4 , however there are challenges with activity, selectivity, and a cumbersome fabrication process. Herein, by virtue of the meta-position structure of alkynyl in 1,3,5-triethynylbenzene and the interaction between Cu and -C≡C-, a Cu SAs electrocatalyst (Cu-SAs/HGDY), containing low-coordination Cu-C2 active sites, was synthesized through a simple and efficient one-step method. Notably, this represents the first achievement of preparing Cu SAs catalysts with Cu-C2 coordination structure, which exhibited high CO2 -to-CH4 selectivity (72.1 %) with a high CH4 partial current density of 230.7 mA cm-2 , and a turnover frequency as high as 2756 h-1 , dramatically outperforming currently reported catalysts. Comprehensive experiments and calculations verified the low-coordination Cu-C2 structure not only endowed the Cu SAs center more positive electricity but also promoted the formation of H•, which contributed to the outstanding e-CO2 RR to CH4 electrocatalytic performance of Cu-SAs/HGDY. Our work provides a novel H⋅-transferring mechanism for e-CO2 RR to CH4 and offers a protocol for the preparation of two-coordinated Cu SAs catalysts.

Advanced Catalyst Design and Reactor Configuration Upgrade in Electrochemical Carbon Dioxide Conversion

Electrochemical carbon dioxide reduction reaction (CO2 RR) driven by renewable energy shows great promise in mitigating and potentially reversing the devastating effects of anthropogenic climate change and environmental degradation. The simultaneous synthesis of energy-dense chemicals can meet global energy demand while decoupling emissions from economic growth. However, the development of CO2 RR technology faces challenges in catalyst discovery and device optimization that hinder their industrial implementation. In this contribution, a comprehensive overview of the current state of CO2 RR research is provided, starting with the background and motivation for this technology, followed by the fundamentals and evaluated metrics. Then the underlying design principles of electrocatalysts are discussed, emphasizing their structure-performance correlations and advanced electrochemical assembly cells that can increase CO2 RR selectivity and throughput. Finally, the review looks to the future and identifies opportunities for innovation in mechanism discovery, material screening strategies, and device assemblies to move toward a carbon-neutral society.

High dispersion dendritic fibrous morphology nanospheres for electrochemical CO2 reduction to C2H4

The electrochemical CO2 reduction to specific multi-carbon product on copper-based catalysts is subjected to low activity and poor selectivity. Herein, catalyst structure, morphology, and chemical component are systematically studied for bolstering the activity and selectivity of as-prepared catalyzers in this study. Dendritic fibrous nano-silica spheres favor the loading of active species and the transport of reactant from the central radial channel. Cu/DFNS with high dispersion active sites are fabricated through urea-assisted precipitation way. The coexistence of Cu(I)/Cu(II) induces a close combination of Cu active sites and CO2 on the Cu/DFNS interface, promoting the CO2 activation and CC coupling. The Cu-O-Si interface (Cu phyllosilicate) can improve CO2 and CO attachment. Cu/DFNS show the utmost Faradaic efficiency of C2H4 with a value of 53.04% at -1.2 V vs. RHE. And more importantly, in-situ ATR-SEIRAS reveals that the CC coupling is boosted for effectively producing C2H4 as a consequence of the existence of *COL, *COOH, and *COH intermediates. The mechanism reaction path of Cu/DFNS is inferred to be *CO2 → *COOH → *CO → *CO*COH → C2H4. Our findings will be helpful to gain insight into the links between morphology, texture, chemical component of catalyzers, and electrochemical reduction of CO2, providing valuable guidance in the design of more efficient catalysts.

Breaking K+ Concentration Limit on Cu Nanoneedles for Acidic Electrocatalytic CO2 Reduction to Multi-Carbon Products

Electrocatalytic CO2 reduction reaction (CO2 RR) to multi-carbon products (C2+ ) in acidic electrolyte is one of the most advanced routes for tackling our current climate and energy crisis. However, the competing hydrogen evolution reaction (HER) and the poor selectivity towards the valuable C2+ products are the major obstacles for the upscaling of these technologies. High local potassium ions (K+ ) concentration at the cathode's surface can inhibit proton-diffusion and accelerate the desirable carbon-carbon (C-C) coupling process. However, the solubility limit of potassium salts in bulk solution constrains the maximum achievable K+ concentration at the reaction sites and thus the overall acidic CO2 RR performance of most electrocatalysts. In this work, we demonstrate that Cu nanoneedles induce ultrahigh local K+ concentrations (4.22 M) - thus breaking the K+ solubility limit (3.5 M) - which enables a highly efficient CO2 RR in 3 M KCl at pH=1. As a result, a Faradaic efficiency of 90.69±2.15 % for C2+ (FEC2+ ) can be achieved at 1400 mA.cm-2 , simultaneous with a single pass carbon efficiency (SPCE) of 25.49±0.82 % at a CO2 flow rate of 7 sccm.

Structural transformations in Cu, Ag, and Au metal nanoclusters

Finite-temperature structures of Cu, Ag, and Au metal nanoclusters are calculated in the entire temperature range from 0 K to melting using a computational methodology that we proposed recently [M. Settem et al., Nanoscale 14, 939 (2022)]. In this method, Harmonic Superposition Approximation (HSA) and Parallel Tempering Molecular Dynamics (PTMD) are combined in a complementary manner. HSA is accurate at low temperatures and fails at higher temperatures. PTMD, on the other hand, effectively samples the high temperature region and melts. This method is used to study the size- and system-dependent competition between various structural motifs of Cu, Ag, and Au nanoclusters in the size range 1-2 nm. Results show that there are mainly three types of structural changes in metal nanoclusters, depending on whether a solid-solid transformation occurs. In the first type, the global minimum is the dominant motif in the entire temperature range. In contrast, when a solid-solid transformation occurs, the global minimum transforms either completely to a different motif or partially, resulting in the co-existence of multiple motifs. Finally, nanocluster structures are analyzed to highlight the system-specific differences across the three metals.

Cooperative Copper Single-Atom Catalyst in 2D Carbon Nitride for Enhanced CO2 Electrolysis to Methane

Renewable-electricity-powered carbon dioxide (CO2 ) reduction (eCO2 R) to high-value fuels like methane (CH4 ) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2 R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. In this work, 2D carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), are exploited to host Cu-N2 type single-atom sites with high density (≈1.5 at%), via a facile metal-ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2 R-to-CH4 performance with Faradaic efficiency (FECH4 ) of ≈68% and a high partial current density of 348 mA cm-2 at -0.84 V vs reversible hydrogen electrode (RHE), surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the matrices and how the Cu local environment dictates the adsorbate BEs, density of states, and CO2 -to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2 R-to-CH4 pathway.

Zn-Induced Synthesis of Porous Fe-N,S-C Electrocatalyst with Iron-Based Active Sites Containing Sulfides, Oxides and Nitrides for Efficient Oxygen Reduction and Zinc-Air Batteries

There is an urgent need to design and synthesize non-noble metal electrocatalysts (NNMEs) for the replacement of platinum-based electrocatalysts to enhance the sluggish oxygen reduction reaction (ORR) for Zn-air batteries and fuel cells. Herein, Fe-N,S-C materials were fabricated through two steps: first, reprecipitating hemin by adjusting the pH and, then, decorating it with melamine and cysteine in the presence of Zn2+. The resulting Fe-N,S-C-950 (Zn) was prepared after pyrolysis at 950 °C. Using this method, abundant iron-based active species with good dispersion were obtained. The fabrication of more micropores in Fe-N,S-C-950 (Zn) plays a positive role in the improvement of ORR activity. On comparison, Fe-N,S-C-950 (Zn) outperforms Fe-N,S-C-950 and Fe-N-C-950 (Zn) with respect to the ORR due to its larger specific surface area, porous structure, multiple iron-based active sites and N- and S-doped C. Fe-N,S-C-950 (Zn) achieves outstanding ORR performances, including a half-wave potential (E1/2) of 0.844 V and 0.715 V versus a reversible hydrogen electrode (RHE) in 0.1 M KOH and 0.1 M HClO4 solution, respectively. In addition, Fe-N,S-C-950 (Zn) shows an outstanding Zn-air battery performance with an open-circuit voltage (OCV) of 1.450 V and a peak power density of 121.9 mW cm-2, which is higher than that of 20 wt% Pt/C. As a result, the as-prepared electrocatalyst in this work shows the development of the Zn-assisted strategy combined with the assembly of porphyrins as NNMEs for the enhancement of the ORR in both alkaline and acidic solutions.

TM2 -B2 Quadruple Active Sites Supported on a Defective C3 N Monolayer as Catalyst for the Electrochemical CO2 Reduction: A Theoretical Perspective

Developing high-performance electrocatalysts for the CO₂ reduction reaction (CO₂ RR) holds great potential to mitigate the depletion of fossil feedstocks and abate the emission of CO₂ . In this contribution, using density functional theory calculations, we systematically investigated the CO₂ RR performance catalyzed by TM₂ -B₂ (TM=Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu) supported on a defective C₃ N monolayer (V-C₃ N). Through the screening in terms of stability of catalyst, activity towards CO₂ adsorption, and selectivity against hydrogen evolution reaction, Mn₂ -, Fe₂ -, Co₂ -, and Ni₂ -B₂ @V-C₃ N were demonstrated to be a highly promising CO₂ RR electrocatalyst. Due to quadruple active sites, these candidates can adsorb two or three CO₂ molecules. Strikingly, different products, distributing from C₁ to C₂₊ , can be generated. The high activity originates from the synergistic effect of TM and B atoms, in which they serve as adsorption sites for the C- and O-species, respectively. The high selectivity towards C₂₊ products at the Fe₂ -, and Ni₂ -B₂ sites stems from moderate C adsorption strength but relatively weak O adsorption strength, in which a universal descriptor, that is, 0.6 ΔE_C -0.4 ΔE_O =-1.77 eV (ΔE_C /ΔE_O is the adsorption energy of C/O), was proposed. This work would offer a novel perspective for the design of high active electrocatalysts towards CO₂ RR and for the synthesis of C₂₊ compounds.

Second Sphere Effects Promote Formic Acid Dehydrogenation by a Single-Atom Gold Catalyst Supported on Amino-Substituted Graphdiyne

Regulating the second sphere of homogeneous molecular catalysts is a common and effective method to boost their catalytic activities, while the second sphere effects have rarely been investigated for heterogeneous single-atom catalysts primarily due to the synthetic challenge for installing functional groups in their second spheres. Benefiting from the well-defined and readily tailorable structure of graphdiyne (GDY), an Au single-atom catalyst on amino-substituted GDY is constructed, where the amino group is located in the second sphere of the Au center. The Au atoms on amino-decorated GDY displayed superior activity for formic acid dehydrogenation compared with those on unfunctionalized GDY. The experimental studies, particularly the proton inventory studies, and theoretical calculations revealed that the amino groups adjacent to an Au atom could serve as proton relays and thus facilitate the protonation of an intermediate Au-H to generate H₂ . Our study paves the way to precisely constructing the functional second sphere on single-atom catalysts.

Graphdiyne supported Ag-Cu tandem catalytic scheme for electrocatalytic reduction of CO2 to C2+ products

The electrochemical CO₂ reduction reaction (CO₂RR) to added-value C₂₊ products is a worthy way to effectively reduce CO₂ levels in the atmosphere. Cu nanomaterials have been proposed as efficient CO₂RR catalysts for producing C₂₊ products; however, the difficulties in controlling their efficiency and selectivity hinder their applications. Herein, we propose a simple routine to construct a graphdiyne (GDY) supported Ag-Cu nanocluster as a C₂₊ product-selective electrocatalyst and optimize the composition by electrochemical performance screening. The synthesized Ag-Cu nanoclusters are uniformly distributed on the surface of GDY with particle sizes constricted to 3.7 nm due to the strong diyne-Cu interaction. Compared to Cu/GDY, Ag-Cu/GDY tandem schemes exhibited superior CO₂RR to C₂₊ performance with a Faraday efficiency (FE) of up to 55.1% and a current density of 48.6 mA cm^-2 which remain stable for more than 33 hours. Theoretical calculations show that the adsorption energy of CO is much higher on Cu (-1.066 eV) than on Ag (-0.615 eV), thus promoting the drift of *CO from Ag to Cu. Moreover, the calculations indicate that the key C-C coupling reaction of *CO with *COH is more favored on Ag-Cu/GDY than on the original Cu/GDY which contributes to the formation of C₂₊ products. Our findings shed light on a new strategy of combining a GDY support with a tandem catalytic scheme for developing new CO₂RR catalysts with superior selectivity and activity for C₂₊ products.

Electronic Perturbation of Copper Single-Atom CO2 Reduction Catalysts in a Molecular Way

Fine-tuning electronic structures of single-atom catalysts (SACs) plays a crucial role in harnessing their catalytic activities, yet challenges remain at a molecular scale in a controlled fashion. By tailoring the structure of graphdiyne (GDY) with electron-withdrawing/-donating groups, we show herein the electronic perturbation of Cu single-atom CO₂ reduction catalysts in a molecular way. The elaborately introduced functional groups (-F, -H and -OMe) can regulate the valance state of Cu^δ+ , which is found to be directly scaled with the selectivity of the electrochemical CO₂ -to-CH₄ conversion. An optimum CH₄ Faradaic efficiency of 72.3 % was achieved over the Cu SAC on the F-substituted GDY. In situ spectroscopic studies and theoretical calculations revealed that the positive Cu^δ+ centers adjusted by the electron-withdrawing group decrease the pK_a of adsorbed H₂ O, promoting the hydrogenation of intermediates toward the CH₄ production. Our strategy paves the way for precise electronic perturbation of SACs toward efficient electrocatalysis.

Graphdiyne-Based Single-Atom Catalysts with Different Coordination Environments

As a special carbon material, graphdiyne (GDY) features the superiorities of incomplete charge transfer effect on the atomic level, tunable electronic structure and anchoring metal atoms directly with organometallic coordination bonds M (metal)-C (alkynyl carbon in GDY), providing it an ideal platform to construct single-atom catalysts (ACs). The coordination environment of single atoms anchored on GDY plays a key role in their catalytic performance. The mini-review highlights state-of-the-art progress in the rational design of GDY-based ACs and their applications, and mainly reveals the relationship between the coordination engineering of the GDY-based ACs and corresponding catalytic performance. Finally, some prospects concerning the future development of GDY-based ACs in energy conversion are also discussed.

Electronic Oxide-Support Strong Interactions in the Graphdiyne-Supported Cuprous Oxide Nanocluster Catalyst

The interfacial interaction in supported catalysts is of great significance for heterogeneous catalysis because it can induce charge transfer, regulate electronic structure of active sites, influence reactant adsorption behavior, and eventually affect the catalytic performance. It has been theoretically and experimentally elucidated well in metal/oxide catalysts and oxide/metal inverse catalysts, but is rarely reported in carbon-supported catalysts due to the inertness of traditional carbon materials. Using an example of a graphdiyne-supported cuprous oxide nanocluster catalyst (Cu₂O NCs/GDY), we herein demonstrate the strong electronic interaction between them and put forward a new type of electronic oxide-graphdiyne strong interaction, analogous to the concept of electronic oxide/metal strong interactions in oxide/metal inverse catalysts. Such electronic oxide-graphdiyne strong interaction can not only stabilize Cu₂O NCs in a low-oxidation state without aggregation and oxidation under ambient conditions but also change their electronic structure, resulting in the optimized adsorption energy for reactants/intermediates and thus leading to improved catalytic activity in the Cu(I)-catalyzed azide-alkyne cycloaddition reaction. Our study will contribute to the comprehensive understanding of interfacial interactions in supported catalysts.

Surface Site-Specific Replacement for Catalysis Selectivity Switching

Surface atom replacement in materials without other composition/structure changes is challenging but is important for fundamental scientific research and for practical applications. In particular, for nanoparticles including nanoclusters, surface metal site-specific replacement with atomic precision has not yet been achieved. In this study, we for the first time achieved surface site-specific antigalvanic replacement with the remaining composition/structure and surface replacement-dependent selectivity in the electrocatalytic reduction of CO₂. Density functional theory (DFT) calculations describe the catalysis selectivity switch induced by replacing Ag with Cu and explain why Cu replacement facilitates C₂ production. Also, CO₂ electroreduction to C₂ on well-defined metal nanoclusters is first reported in this study.

Operando X-ray Absorption Spectroscopy Study of SnO2 Nanoparticles for Electrochemical Reduction of CO2 to Formate

Tin-based electrocatalysts exhibit a remarkable ability to catalyze CO₂ to formate selectively. Understanding the size-property relationships and exploring the evolution of the active size still lack complete understanding. Herein, we prepared SnO₂ nanoparticles (NPs) with a controllable size supported on commercial carbon spheres (SnO₂/C-n, n = 1, 2, and 3) by a simple low-temperature annealing method. The transmission electron microscopy/scanning transmission electron microscopy images and fitting results of the small-angle X-ray scattering profile confirm the increased size of SnO₂ NPs due to the increase of SnO₂ loading. The catalytic performance of SnO₂ has proved the size-dependent effect during the CO₂ reduction reaction process. The as-prepared SnO₂/C-1 displayed the maximum Faradic efficiency of formate (FE_HCOO-) of 82.7% at -1.0 V versus reversible hydrogen electrode (RHE). In contrast, SnO₂/C-2 and SnO₂/C-3 with larger particle sizes achieved lower maximum FE_HCOO- and larger overpotential. Moreover, we employed operando X-ray absorption spectroscopy to study the evolution of the oxidation state and local coordination environment of SnO₂ under working conditions. In addition to the observed shifts of the rising edge of Sn K-edge X-ray absorption near-edge structure spectra to a lower energy side as the applied voltage decreases, the decreased coordination number of Sn in the Sn-O scattering path and the presence of Sn metal contribution in the extended X-ray absorption fine structure spectra verify the reduction of SnO₂ to SnO_x and metallic Sn.

Single-Site Heterogeneous Organometallic Ir Catalysts Embedded on Graphdiyne: Structural Manipulation Beyond the Carbon Support

Accurate control over the coordination circumstances of single-atom catalysts (SACs) is decisive to their intrinsic activity. Here, two single-site heterogeneous organometallic catalysts (SHOCs), Cp*Ir-L/GDY (L = OH^- and Cl^- ; Cp* = pentamethylcyclopentadienyl), with the fine-tuned local coordination and electronic structure of Ir sites, are constructed by anchoring Cp*Ir complexes on graphdiyne (GDY) matrix via a one-pot procedure. The spectroscopic studies and theoretical calculations indicate that the Ir atoms in Cp*Ir-Cl/GDY and Cp*Ir-OH/GDY have a much higher oxidation state than Ir in the SAC Ir/GDY. As a proof-of-principle demonstration, the GDY-supported SHOCs are used for formic acid dehydrogenation, which display a fivefold enhancement of catalytic activity compared with SAC Ir/GDY. The kinetic isotope effect and in situ Fourier-transform infrared studies reveal that the rate-limiting step is the β-hydride elimination process, and Cp* on the Ir site accelerates the β-hydride elimination reaction. The GDY-supported SHOCs integrate the merits of both SACs and molecular catalysts, wherein the isolated Ir anchored on GDY echoes with SACs' behavior, and the Cp* ligand enables precise structural and electronic regulation like molecular catalysts. The scheme of SHOCs adds a degree of freedom in accurate regulation of the local structure, the electronic property, and therefore the catalytic performance of single-atom catalysts.

Molecular Assembled Electrocatalyst for Highly Selective CO2 Fixation to C2+ Products

In certain metalloenzymes, multimetal centers with appropriate primary/secondary coordination environments allow carbon-carbon coupling reactions to occur efficiently and with high selectivity. This same function is seldom realized in molecular electrocatalysts. Herein we synthesized rod-shaped nanocatalysts with multiple copper centers through the molecular assembly of a triphenylphosphine copper complex (CuPPh). The assembled molecular CuPPh catalyst demonstrated excellent electrochemical CO₂ fixation performance in aqueous solution, yielding high-value C₂₊ hydrocarbons (ethene) and oxygenates (ethanol) as the main products. Using density functional theory (DFT) calculations, in situ X-ray absorption spectroscopy (XAS) and quasi-in situ X-ray photoelectron spectroscopy (XPS), and reaction intermediate capture, we established that the excellent catalytic performance originated from the large number of double copper centers in the rod-shaped assemblies. Cu-Cu distances in the absence of CO₂ were as long as 7.9 Å, decreasing substantially after binding CO₂ molecules indicating dynamic and cooperative function. The double copper centers were shown to promote carbon-carbon coupling via a CO₂ transfer-coupling mechanism involving an oxalate (OOC-COO) intermediate, allowing the efficient production of C₂₊ products. The assembled CuPPh nanorods showed high activity, excellent stability, and a high Faradaic efficiency (FE) to C₂₊ products (65.4%), with performance comparable to state-of-the-art copper oxide-based catalysts. To our knowledge, our findings demonstrate that harnessing metalloenzyme-like properties in molecularly assembled catalysts can greatly improve the selectivity of CO2RR, promoting the rational design of improved CO2 reduction catalysts.

A Deprotection-free Method for High-yield Synthesis of Graphdiyne Powder with In Situ Formed CuO Nanoparticles

With a direct band gap, superior charge carrier mobility, and uniformly distributed pores, graphdiyne (GDY) has stimulated tremendous interest from the scientific community. However, its broad application is greatly limited by the complicated multistep synthesis process including complex deprotection of hexakis-[(trimethylsilyl)ethynyl]benzene (HEB-TMS) and peeling of GDY from the substrates. Here, we describe a deprotection-free strategy to prepare GDY powder by directly using HEB-TMS as the monomer. When CuCl was used as the catalysts in DMF solvent, the yield of GDY powder reached ≈100 %. More interestingly, uniformly dispersed CuO nanoparticles with an average diameter of ≈2.9 nm were in situ formed on GDY after the reaction. The prepared CuO/GDY was demonstrated an excellent co-catalyst for photocatalytic hydrogen evolution, comparable to the state-of-art Pt co-catalyst. The deprotection-free approach will widen the use of GDY and facilitate its scaling up to industrial level.

Electrocatalytic CO2 reduction to alcohols by modulating the molecular geometry and Cu coordination in bicentric copper complexes

Electrocatalytic reduction of CO₂ into alcohols of high economic value offers a promising route to realize resourceful CO₂ utilization. In this study, we choose three model bicentric copper complexes based on the expanded and fluorinated porphyrin structure, but different spatial and coordination geometry, to unravel their structure-property-performance correlation in catalyzing electrochemical CO₂ reduction reactions. We show that the complexes with higher intramolecular tension and coordination asymmetry manifests a lower electrochemical stability and thus more active Cu centers, which can be reduced during electrolysis to form Cu clusters accompanied by partially-reduced or fragmented ligands. We demonstrate the hybrid structure of Cu cluster and partially reduced O-containing hexaphyrin ligand is highly potent in converting CO₂ into alcohols, up to 32.5% ethanol and 18.3% n-propanol in Faradaic efficiencies that have been rarely reported. More importantly, we uncover an interplay between the inorganic and organic phases to synergistically produce alcohols, of which the intermediates are stabilized by a confined space to afford extra O-Cu bonding. This study underlines the exploitation of structure-dependent electrochemical property to steer the CO₂ reduction pathway, as well as a potential generic tactic to target alcohol synthesis by constructing organic/inorganic Cu hybrids.

Electrocatalytic reduction of CO2 into multi-carbon alcohols of high economic merit offers an effective means to close the carbon cycle. Here the authors show the synergy between inorganic and organic phases derived from rationally designed molecular precursors to produce alcohols in high efficiency.

Polyethyleneimine-reinforced Sn/Cu foam dendritic self-supporting catalytic cathode for CO2 reduction to HCOOH

In this work, a novel catalytic cathode of polyethyleneimine (PEI)-Sn/Cu foam with dendritic structure was prepared by electrodeposition and impregnation. It was used in the electrocatalytic reduction of CO₂ to HCOOH, and its performance in this process was evaluated. At -0.97 V vs. RHE, the faradaic efficiency and current density reached 92.3% and 57.1 mA cm^-2, respectively, in a 0.5 M KHCO₃ electrolyte. The HCOOH production rate reached 890.4 μmol h^-1 cm^-2, which exceeds those for most reported Sn catalysts. Density functional theory calculations showed that use of Sn/Cu foam is more conducive to HCOOH formation than use of Cu or Sn alone, and *OCHO is the main intermediate in HCOOH formation. The results of OH^- adsorption experiments confirmed that the introduction of PEI enhanced the catalytic capacity of the Sn/Cu foam, stabilized CO₂·^- intermediates, and promoted HCOOH generation. These results will provide an attractive strategy for developing efficient catalysts with excellent activities and stabilities for CO₂ electroreduction.

Subnanometric Ru clusters with upshifted D band center improve performance for alkaline hydrogen evolution reaction

Subnanometric metal clusters usually have unique electronic structures and may display electrocatalytic performance distinctive from single atoms (SAs) and larger nanoparticles (NPs). However, the electrocatalytic performance of clusters, especially the size-activity relationship at the sub-nanoscale, is largely unexplored. Here, we synthesize a series of Ru nanocrystals from single atoms, subnanometric clusters to larger nanoparticles, aiming at investigating the size-dependent activity of hydrogen evolution in alkaline media. It is found that the d band center of Ru downshifts in a nearly linear relationship with the increase of diameter, and the subnanometric Ru clusters with d band center closer to Femi level display a stronger water dissociation ability and thus superior hydrogen evolution activity than SAs and larger nanoparticles. Benefiting from the high metal utilization and strong water dissociation ability, the Ru clusters manifest an ultrahigh turnover frequency of 43.3 s^-1 at the overpotential of 100 mV, 36.1-fold larger than the commercial Pt/C.

Understanding Synthesis and Structural Variation of Nanomaterials Through In Situ/Operando XAS and SAXS

Nanostructured materials with high surface area and low coordinated atoms present distinct intrinsic properties from their bulk counterparts. However, nanomaterials' nucleation/growth mechanism during the synthesis process and the changes of the nanomaterials in the working state are still not thoroughly studied. As two indispensable methods, X-ray absorption spectroscopy (XAS) provides nanomaterials' electronic structure and coordination environment, while small-angle X-ray scattering (SAXS) offers structural properties and morphology information. A combination of in situ/operando XAS and SAXS provides high temporal and spatial resolution to monitor the evolution of nanomaterials. This review gives a brief introduction to in situ/operando SAXS/XAS cells. In addition, the application of in situ/operando XAS and SAXS in preparing nanomaterials and studying changes of working nanomaterials are summarized.