Frequency-Upconverted Stimulated Emission by Up to Six-Photon Excitation from Highly Extended Spiro-Fused Ladder-Type Oligo(p-phenylene)s

Two-photon pumped forward, backward and random lasing in a stilbazolium dye nanocomposite solution containing LAPONITE® as a scattering center

Multiphoton upconversion lasing in scattering gain media has attracted considerable attention in recent years. LAPONITE® is a scattering medium consisting of 2-D nano-discs that can be dispersed as a transparent solution in aqueous media and forms a gel at high concentration. In this paper, we demonstrate two-photon pumped upconversion regular lasing along forward and backward directions as well as random lasing along all other directions. The gain medium was a mixture of PRL-L5 dye solution in DMF with a water solution of LAPONITE® in which LAPONITE® nano-discs of 25-30 nm diameter may form large-size particles of several hundred nanometers due to electrostatic binding between the dye molecules and the LAPONITE® nano-discs, and therefore can produce more efficient scattering feedback for random lasing generation. Using 795 nm and 100 fs laser pulses as two-photon pump sources, we observed random lasing at around 500 nm, characterized by both spectral and temporal narrowing in all directions apart from the traditional (colinear forward/backward) lasing directions. The peak spectral intensity of random lasing is ∼3.4 times higher than the normal fluorescence emission, but 105-106 times lower than the traditional forward lasing. This study shows the feasibility of generating both traditional forward/backward and random lasing in a moderately scattering gain medium for applications in diverse fields such as remote sensing, optical communications, and upconversion imaging.

Exceptional three- to six-photon absorption at organometallic dendrimers

The light-intensity dependence of multi-photon absorption (MPA) affords outstanding spatial control. Furthermore, compared to the higher-energy photons needed for analogous linear absorption, the lower-energy photons involved in MPA often correspond to important wavelengths, such as those of the biological and telecommunications "windows". It is therefore of crucial importance to develop molecules that exhibit outstanding MPA cross-sections. However, although progress has been made with two-photon absorption, there is currently a dearth of efficient instantaneous n-photon absorbers (n > 2), a key reason being the scarcity of structure-property studies required to understand higher-order MPA. We herein report systematically-varied metallodendrimers up to third-generation in size, together with their nonlinear absorptive responses over the spectral range 600-2520 nm. We show that the dendrimers exhibit exceptional instantaneous three- to six-photon absorption cross-sections, with maximal values increasing with dendrimer generation and installation of solubilizing group, and we report that changing the groups at the dendrimer periphery can shift the wavelengths of the nPA maxima. We also describe time-dependent DFT studies that have facilitated assignment of the key linear and nonlinear transitions and disclosed the crucial role of the metal in the outstanding MPA performance.

C3-Symmetric Indole-Based Truxenes: Design, Synthesis, and Photophysical Studies

In recent years, truxenes and related polyaromatic hydrocarbons (PAHs) have engrossed ample interest of the scientific community because of their ease of synthesis, functionalizations, and use as building blocks for the synthesis of fullerene fragments, liquid crystals, larger polyarenes, and C3-tripod materials. In the present work, we have disclosed an ingenious method for the construction of various indolo-truxene hybrid molecules in good yields (52-90%), by means of the acid-catalyzed cotrimerization, Friedel-Crafts acylation, and Fischer indole synthesis, and fully characterized them through the standard spectroscopic techniques. The photophysical properties of the thus-prepared compounds have also been investigated using steady-state absorption and fluorescence and time-resolved fluorescence spectroscopy techniques. Moreover, the density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations have been studied to correlate them with the measured photophysical properties of the synthesized indolo-truxene derivatives.

Device parameter to evaluate exciton energy transfer in organic whispering-gallery-mode microresonators and its dependence on the amplified spontaneous emission threshold

Exciton energy transfer in organic whispering-gallery-mode (WGM) resonators and its effect on the amplified spontaneous emission (ASE) threshold have been investigated using the stilbene-based energy donor 4,4'-bis[(N-carbazole)styryl]biphenyl (BSB-Cz) and the coumarin-based energy acceptor 2,3,6,7-tetrahydro-1,1,7,7,-tetramethyl-1H,5H,11H-10-(2-benzothiazolyl)quinolizino[9,9a,1gh]coumarin (C545T). Using the stacked-layer structure of BSB-Cz/C545T/BSB-Cz, we fabricated bowl-shaped microresonators on silica microspheres with a total thickness of 250 nm fixing the thickness of the C545T layer to 1 nm. The ASE threshold depended on the thicknesses of the top and bottom BSB-Cz layers, which affect the magnitude of the energy transfer. To assess the relationship between the ASE threshold and energy transfer, we developed a device parameter to evaluate the magnitude of the energy transfer by formulating the rate equations. We found that ASE easily occurs under the condition that the C545T molecules become unable to accept energy from the BSB-Cz excitons owing to the high exciton density of C545T, and that the ASE threshold decreases with decreasing device parameter. The device parameter is useful for optimizing microresonator structures in multi-component organic WGM resonators that utilize energy transfer.

A Rigid Multiple Resonance Thermally Activated Delayed Fluorescence Core Toward Stable Electroluminescence and Lasing

The investigation of organic light-emitting diodes (OLEDs) and organic laser devices with thermally activated delayed fluorescence (TADF) molecules is emerging due to the potential of harnessing triplets. In this work, a boron/nitrogen multiple-resonance TADF polycyclic framework fusing carbazole units (CzBNPh) was proposed. CzBNPh exhibited a narrowband emission (<30 nm), a unity photoluminescence quantum yield, and a fast radiative rate. Consequently, CzBNPh demonstrated a low distributed feedback (DFB) lasing threshold of 0.68 μJ cm-2 . Furthermore, the stimulated emission zone of CzBNPh was effectively separated from its singlet and triplet absorption, thereby minimizing the singlet-triplet annihilation under long-pulsed excitation ranging from 20 μs to 2.5 ms. Significantly, the enhanced rigid molecular conformation, thermal stability, and photo-stability resulted in improved lasing and electroluminescence stability compared to that of 5,9-diphenyl-5,9-diaza-13b-boranaphtho[3,2,1-de]anthracene (DABNA)-core. These findings indicate the potential of CzBN-core as a promising framework for achieving long-pulsed wave and electrically-pumped lasing in the future.

Single-Component Color-Tunable Smart Organic Emitters with Simultaneous Multistage Stimuli-Responsiveness and Multimode Emissions

Achieving color-tunable emission in single-component organic emitters with multistage stimuli-responsiveness is of vital significance for intelligent optoelectronic applications, but remains enormously challenging. Herein, we present an unprecedented example of a color-tunable single-component smart organic emitter (DDOP) that simultaneously exhibits multistage stimuli-responsiveness and multimode emissions. DDOP based on a highly twisted amide-bridged donor-acceptor-donor structure has been found to facilitate intersystem crossing, form multimode emissions, and generate multiple emissive species with multistage stimuli-responsiveness. DDOP pristine crystalline powders exhibit abnormal excitation-dependent emissions from a monomer-dominated blue emission centered at 470 nm to a dimer-dominated yellow emission centered at 550 nm through decreasing the ultraviolet (UV) excitation wavelengths, whereas DDOP single crystals show a wide emission band with a main emission peak at 585 nm when excited at different wavelengths. The emission behaviors of pristine crystalline powders and single crystals are different, demonstrating emission features that are closely related to the aggregation states. The work has developed color-tunable single-component organic emitters with simultaneous multistage stimuli-responsiveness and multimode emissions, which is vital for expanding intelligent optoelectronic applications, including multilevel information encryption, multicolor emissive patterns, and visual monitoring of UV wavelengths.

Phonon engineering in Yb:La2CaB10O19 crystal for extended lasing beyond the fluorescence spectrum

Since the first invention of the laser in 1960, direct lasing outside the fluorescence spectrum is deemed impossible owing to the "zero-gain" cross-section. However, when electron-phonon coupling meets laser oscillation, an energy modulation by the quantized phonon can tailor the electronic transitions, thus directly creating some unprecedented lasers with extended wavelengths by phonon engineering. Here, we demonstrate a broadband lasing (1000-1280 nm) in a Yb-doped La2CaB10O19 (Yb:LCB) crystal, far beyond its spontaneous fluorescence spectrum. Numerical calculations and in situ Raman verify that such a substantial laser emission is devoted to the multiphonon coupling to lattice vibrations of a dangling "quasi-free-oxygen" site, with the increasing phonon numbers step-by-step (n = 1-6). This new structural motif provides more alternative candidates with strong-coupling laser materials. Moreover, the quantitative relations between phonon density distribution and laser wavelength extension are discussed. These results give rise to the search for on-demand lasers in the darkness and pave a reliable guideline to study those intriguing electron-phonon-photon coupled systems for integrated photonic applications.

An n-Type All-Fused-Ring Molecule with Photoresponse to 1000 nm for Highly Sensitive Near-Infrared Photodetector

Most of all-fused-ring π-conjugated molecules have wide or medium bandgap and show photo response in the visible range. In this work, an all-fused-ring n-type molecule, which exhibits an ultrasmall optical bandgap of 1.22 eV and strong near-infrared (NIR) absorption with an onset absorption wavelength of 1013 nm is reported. The molecule consists of 14 aromatic rings and has electron donor-acceptor characteristics. It exhibits excellent n-type properties with low-lying HOMO/LUMO energy levels of -5.48 eV/-3.95 eV and high electron mobility of 7.0 × 10^-4  cm²  V^-1  s^-1 . Most importantly, its thin film exhibits a low trap density of 5.55 × 10¹⁶  cm^-3 because of the fixed molecular conformation and consequently low conformation disorder. As a result, organic photodetector (OPD) based on the compound exhibits a remarkably low dark current density (J_d ) of 2.01 × 10^-10  A cm^-2 at 0 V. The device shows a shot-noise-limited specific detectivity (D_sh *) of exceeding 10¹³  Jones at 400-1000 nm wavelength region with a peak specific detectivity of 4.65 × 10¹³  Jones at 880 nm. This performance is among the best reported for self-powered NIR OPDs.

Seven-photon absorption from Na+/Bi3+-alloyed Cs2AgInCl6 perovskites

Nonlinear multi-phonon (2-7) absorption in the Na⁺/Bi³⁺-alloyed Cs₂AgInCl₆ lead-free double perovskites with ∼100% photoluminescence quantum yield and superior stability is observed for the first time, which can be pumped by a femtosecond laser in a wide spectral range (800-2600 nm). First-principles calculations verify that the parity-forbidden transition from the valence band maximum and conduction band minimum (at the Γ point) is not broken by Na⁺/Bi³⁺ doping, and strong optical band-to-band absorption occurs at the L&X points. Time-resolved emission spectra evidence that single-photon and multi-photon pumping leads to the same self-trapped exciton transition and high-order nonlinear absorption will not induce a remarkable thermal effect. Finally, we demonstrate that the Cs₂Na_0.4Ag_0.6In_0.99Bi_0.01Cl₆ DP shows great potential for next-generation wavelength-selective and highly sensitive multiphoton imaging applications.

Optical Amplification at 637 and 1067 nm Based on Organic Molecule AQ(PhDPA)2 and NdIII Complex Codoped Polymer Waveguides

Based on the molecular energy transfer mechanism, relative gains at 1067 and 637 nm wavelengths are achieved in thermally activated delayed fluorescence molecule AQ(PhDPA)₂ and Nd complex with chelating phosphine oxide as ligands codoped polymer waveguides, with the excitation of low-power UV light-emitting diodes (LEDs) instead of traditional semiconductor lasers as pump sources. For AQ(PhDPA)₂ -Nd(DBTTA)₃ (DBFDPO) (DBTTA = dibenzotetrathienoacene, DBFDPO = 4,6-bis (diphenylphosphoryl) dibenzofuran) -codoped polymethylmethacrylate (PMMA), and AQ(PhDPA)₂ -Nd(DBTTA)₃ (FDPO) (FDPO = 9,9-bis (diphenylphosphorylphenyl) fluorene)-codoped PMMA polymers with a mass ratio of 1:4 respectively, when they are spin-coated as upper claddings, the relative gains of 2.2 and 1.8 dB cm^-1 at 1067 nm are obtained in evanescent-field waveguides with cross-section of 4 × 8 µm² under excitation of 300 mW 405 nm LED, and the gains of 3.9 and 4.9 dB cm^-1 at 637 nm are achieved with pumping of 530 mW 450 nm LED respectively. By growing a 100 nm-thick aluminum reflector with the waveguides, the optical gain at 1067 and 637 nm can be enhanced to 3.5 and 6.1 dB cm^-1 , corresponding to AQ(PhDPA)₂ -Nd(DBTTA)₃ (DBFDPO) and AQ(PhDPA)₂ -Nd(DBTTA)₃ (FDPO)-codoped PMMA polymers, respectively.

Microstructure-driven annihilation effects and dispersive excited state dynamics in solid-state films of a model sensitizer for photon energy up-conversion applications

Bimolecular processes involving exciton spin-state interactions gain attention for their deployment as wavelength-shifting tools. Particularly triplet-triplet annihilation induced photon energy up-conversion (TTA-UC) holds promise to enhance the performance of solar cell and photodetection technologies. Despite the progress noted, a correlation between the solid-state microstructure of photoactuating TTA-UC organic composites and their photophysical properties is missing. This lack of knowledge impedes the effective integration of functional TTA-UC interlayers as ancillary components in operating devices. We here investigate a solution-processed model green-to-blue TTA-UC binary composite. Solid-state films of a 9,10 diphenyl anthracene (DPA) blue-emitting activator blended with a (2,3,7,8,12,13,17,18-octaethyl-porphyrinato) PtII (PtOEP) green-absorbing sensitizer are prepared with a range of compositions and examined by a set of complementary characterization techniques. Grazing incidence X-ray diffractometry (GIXRD) measurements identify three PtOEP composition regions wherein the DPA:PtOEP composite microstructure varies due to changes in the packing motifs of the DPA and PtOEP phases. In Region 1 (≤2 wt%) DPA is semicrystalline and PtOEP is amorphous, in Region 2 (between 2 and 10 wt%) both DPA and PtOEP phases are amorphous, and in Region 3 (≥10 wt%) DPA remains amorphous and PtOEP is semicrystalline. GIXRD further reveals the metastable DPA-β polymorph species as the dominant DPA phase in Region 1. Composition dependent UV-vis and FT-IR measurements identify physical PtOEP dimers, irrespective of the structural order in the PtOEP phase. Time-gated photoluminescence (PL) spectroscopy and scanning electron microscopy imaging confirm the presence of PtOEP aggregates, even after dispersing DPA:PtOEP in amorphous poly(styrene). When arrested in Regions 1 and 2, DPA:PtOEP exhibits delayed PtOEP fluorescence at 580 nm that follows a power-law decay on the ns time scale. The origin of PtOEP delayed fluorescence is unraveled by temperature- and fluence-dependent PL experiments. Triplet PtOEP excitations undergo dispersive diffusion and enable TTA reactions that activate the first singlet-excited (S1) PtOEP state. The effect is reproduced when PtOEP is mixed with a poly(fluorene-2-octyl) (PFO) derivative. Transient absorption measurements on PFO:PtOEP films find that selective PtOEP photoexcitation activates the S1 of PFO within ∼100 fs through an up-converted 3(d, d*) PtII-centered state.

Polymerization-Induced Crystallization of Dopant Molecules: An Efficient Strategy for Room-Temperature Phosphorescence of Hydrogels

Conventional hydrogels such as polyacrylamide and polyacrylic acid ones seldom exhibit phosphorescences at ambient conditions, which limit their applications as optical materials. We propose and demonstrate here a facile strategy to afford these hydrogels with room-temperature phosphorescence by polymerization-induced crystallization of dopant molecules that results in segregation and confinement of the gel matrix with carbonyl groups and thus clusterization-induced phosphorescence. As a model system, crown ethers (CEs) are dissolved in an aqueous solution of concentrated acrylamide that greatly increases the solubility of CEs. During the polymerization process, CEs crystallize to form large spherulites in the polyacrylamide hydrogel. The crystallization arises from the drastically reduced solubility of CEs after the conversion of monomers to polymers during the gel synthesis. The resultant composite hydrogel with a water content of 67 wt % exhibits extraordinary phosphorescence behavior yet maintains good stretchability and resilience. We found that the partial gel matrix is squeezed and confined by in situ-formed crystals, leading to carbonyl clusters and thus phosphorescence emission. The composite gel shows green phosphorescence with an emission peak at 512 nm and a lifetime of 342 ms. The afterglow emission is detectable by the naked eye for several seconds. This strategy has good universality, as validated in other hydrogels with different polymeric matrices and dopant molecules. The development of hydrogels with good mechanical and phosphorescent properties should merit the design of multifunctional soft machines with applications in biomedical and engineering fields.

Dome-shaped mode lasing from liquid crystals for full-color lasers and high-sensitivity detection

In this communication, we report a new class of oscillation mode, dome-shaped mode (DSM), in liquid crystal (LC) microlasers. A record high Q-factor over 24 000 is achieved in LC soft-matter microlasers. We successfully presented a proof-of-concept demonstration of red, green, blue (RGB) LC-DSM microlaser pixels with a 74% broader achievable color gamut than the standard RGB color space. Besides, the detection limit for acetone vapor molecules is as low as 0.5 ppm, confirming the excellent potential of the proposed LC-DSM microlaser in ultra-high sensitivity detection.

Giant Multi‐Photon Absorption by Heptazine Organometalation

Multi‐photon absorption (MPA) is of increasing interest for applications in technologically important “windows” of the electromagnetic spectrum (near‐infrared III, NIR‐III, 1550–1870 nm; and the new 2080–2340 nm region); however, few molecules exist that display strong MPA at these long wavelengths. We herein report the syntheses of the first 2,5,8‐s‐heptazine‐cored organometallic complexes, together with organic analogues. The complexes exhibit outstanding 3PA cross‐sections in the NIR‐III and exceptional 4PA cross‐sections in the new 2080–2340 nm window. We demonstrate that replacing organic donor groups by organometallic units results in an order of magnitude increase in 3PA, the “switching on” of 4PA, and a dramatic improvement in photo‐stability. Our results highlight the impressive outcomes possible with an “organometalation” approach to NLO materials design.

Porous organic polymers for high-performance supercapacitors

With the aim of addressing the global warming issue and fossil energy shortage, eco-friendly and sustainable renewable energy technologies are urgently needed. In comparison to energy conversion, studies on energy storage fall behind and remain largely to be explored. By storing energy from electrochemical processes at the electrode surface, supercapacitors (SCs) bridge the performance gap between electrostatic double-layer capacitors and batteries. Organic electrode materials have drawn extensive attention because of their special power density, good round trip efficiency and excellent cycle stability. Porous organic polymers (POPs) have drawn extensive attention as attractive electrode materials in SCs. In this review, we present and discuss recent advancements and design principles of POPs as efficient electrode materials for SCs from the perspectives of synthetic strategies and the structure-performance relationships of POPs. Finally, we put forward the outlook and prospects of POPs for SCs.

Synthesis and Photophysical Properties of Quinoxaline-Based Blue Aggregation-Induced Emission Molecules

A series of quinoxaline-based compounds 1–4 have been synthesized by Palladium-Catalyzed cross-coupling reaction and their photophysical properties have been extensively studied. Compounds 1–4 show deep blue light emission both in solution (λem ≤ 425 nm, CIEy≤0.03) and in solid-state. Moreover, compounds 1–3 show a non-typical aggregation-induced enhanced emission (AIEE), which would be effective deep blue light-emitting materials. The DFT calculation indicated that the HOMO energy levels of compounds 1–3 are distributed throughout the molecule, and the LUMO energy levels are mainly concentrated on the quinoxaline group. while the HOMO of compound 4 is mainly on the benzene ring at 2,3-position, and the LUMO is distributed both of the quinoxaline and the benzaldehyde group at the 6,7-position.

Highly Efficient Multiphoton Absorption of Zn-AIEgen Frameworks

A series of luminescent frameworks were synthesized from the selective combination of AIE-linker tetra-(4-carboxylphenyl)ethylene (H 4 TCPE) and Zn 2+ . Complex 1 was formed by the close packing of Zn-TCPE hinge, and isostructural complexes 2 - 5 were constructed by the linkage of Zn-TCPE layer and pillar ligand. These complexes exhibit highly efficient multiphoton excited photoluminescence (MEPL) concomitant third-harmonic generation (THG). Interestingly, multiphoton apparent parameters of 1 are far superior to some excellent multiphoton emission materials, even the perovskite nanocrystal. The incorporation of pillar linkers slows down the charge transfer between layers of Zn-TCPE, and the aromatic core of pillar linkers has a great influence on the MEA performance of corresponding frameworks. The unprecedented structural and optical tuning of high performance MPA crystalline materials provides efficient suggestion for the design of next generation multiphoton absorption materials.

Random lasing carbon dot fibers for multilevel anti-counterfeiting

Random lasers, which achieve light amplification through random light scattering in disordered laser gain medium, have found widespread applications in varieties of areas due to the convenient design of laser cavities. In this work, carbon dot fibers with superior fluorescence stability under a high temperature or high humidity environment are fabricated by using a single-step partial thermal decomposition method. Random lasers, which are used for multilevel anti-counterfeiting, are achieved from different types of carbon dot fibers by 370 nm excitation at room temperature. Multilevel anti-counterfeiting is realized by tuning the lasing spectra (between ∼428 and 560 nm) and threshold (between ∼2 and 25 mJ cm^-2) at designated decomposition times and fiber diameters. It is extremely difficult to counterfeit lasing spectra and the specific laser threshold simultaneously. As a result, this will comprehensively improve system safety.

Phenanthroimidazole derivatives showing mild intramolecular charge transfer and high quantum yields and their applications in OLEDs

Phenanthroimidazole derivatives showing bipolar characters, strong emissions in the blue region and their applications in OLED is presented.