High-Performance Sulfate Optical Materials Exhibiting Giant Second Harmonic Generation and Large Birefringence

Ba2GeF2Q3 (Q = S, Se) and Ba3GeF2Se4: new F-based chalcohalides with enhanced birefringence

Three new F-based chalcohalides, Ba2GeF2Q3 (Q = S, Se) and Ba3GeF2Se4, have been successfully synthesized. On going from Ba3GeF2Se4 (Δn = 0.063@1064 nm) to Ba2GeF2Q3 (Q = S, Se) (Δn = 0.109 and 0.103@1064 nm, respectively), the birefringence doubled. The structure-property relationship study shows that the enhanced birefringence originates from the modulation of the configuration of the ionic lattices and highly polymerized covalent lattices. This provides not only promising IR birefringent crystals, Ba2GeF2Q3, but also some insights into the design of IR birefringent materials.

SbO(OH)2(IO3): The First Polar Sb5+-Iodate with a Strong Second-Harmonic Generation Response and a Wide Bandgap

Widening the bandgaps while maintaining a strong second harmonic generation response has always been a research hotspot in the field of nonlinear optical iodate materials. A strategy involving covalent bonding is proposed that leverages the high valent later main group cation to construct iodates with predominantly covalent interactions. By using BiO(IO3) as a template, the first Sb5+-containing polar iodate, SbO(OH)2(IO3) is successfully isolated. The introduction of the two hydroxide anions led to the reduction of layered BiO(IO3) into 1D SbO(OH)2(IO3) in which two corner-sharing SbO4(OH)2 octahedra are further bridged by an iodate group. The covalently bonded [SbO(OH)2]+ chains and the optimal packing fashion of the asymmetric IO3 - groups generate a very strong second harmonic generation signal of 14 times that of KH2PO4. Furthermore, SbO(OH)2(IO3) exhibits a wide bandgap of 4.14 eV and a high laser induced damage threshold [27.9 × AgGaS2, 0.2 × KH2PO4 (10 ns, 10 Hz)].

Li2NaB3S2O12: A Deep-UV Transparent Borosulfate with Moderate Birefringence Derived from the [B3S2O12]∞ Infinite Chain Designed by the High Boron-to-Sulfur Ratio Strategy

The first mixed alkali metal borosulfate compound, Li2NaB3S2O12 (LNBSO), which contains [BO3] groups, was designed and synthesized by using a high boron-to-sulfur ratio strategy through the high temperature solution method. LNBSO exhibits a birefringence of 0.057@546.1 nm in experiments, which was mainly contributed by the [BO3] groups, and possesses a short absorption edge at 184 nm, and the space group of LNBSO is P21/c. This newly synthesized borosulfate compound holds potential as a promising birefringent material within the deep-ultraviolet wavelength range. Moreover, the investigation on the relationship among the ratio of boron to sulfur, the dimensionality of the anionic framework, and the formation of [BO3] groups has been conducted on available borosulfate, providing insights for the synthesis of borosulfate with desirable performances.

Unusual Triple-State Switching of Thermally Induced Birefringence in a Two-Dimensional Perovskite Ferroelectric

Birefringent crystals hold a significant position in optical and optoelectronic fields due to their capability to control polarized light. Despite various chemical strategies devoted to designing birefringent crystals, it remains a challenge to switch and manipulate birefringence under physical stimuli. Here we present an unusual triple-state switching of birefringence in a 2D perovskite ferroelectric, (N-methylcyclohexylammonium)2PbCl4 (1), which exhibits two reversible phase transitions at 361 and 373 K. The in-plane birefringence of 1 (Δnbc) shows three distinctive states inside the bc plane, namely, the low-, high-, and zero-Δnbc states. Strikingly, a huge augmentation of Δnbc is solidly confirmed up to ∼400% between its low and high states, far beyond other birefringent materials. The origin of this triple-state switching of birefringence involves the variation of the ferroelastic strain and domain in the vicinity of the phase transition. As an entirely new mode of switching birefringence, this work facilitates the further development of new intelligent nonlinear optics.

A highly birefringent metal-free crystal assembled by cooperative non-covalent interactions

Birefringent crystals can manipulate the phase and polarization of light, so they are widely used as essential components in various optical devices. Common strategies to construct birefringent crystals are introducing metal cations that are either able to realize favorable coordination with functional anionic units or are susceptible to polarizability anisotropy. Herein, we report a metal-free crystal, NH4(H2C6N7O3)·2H2O, synthesized using the facile solution method. In the crystal structure of NH4(H2C6N7O3)·2H2O, (H2C6N7O3)- functional units are assembled in an optimal manner by cooperative non-covalent interactions, i.e., hydrogen bonding and π-π interactions. As a result, this metal-free crystal possesses exceptional birefringence up to 0.54@550 nm, which is larger than those of most metal-containing birefringent crystals. In addition, the interference color of this crystal does not change obviously from 243 K to 313 K, indicating that the birefringence is robust at different temperatures. This work will inspire useful insights into the role of non-covalent interactions in designing outstanding birefringent crystals for efficient polarized optical devices.

Reconstructing nearly isotropic microstructures to construct a one-dimensional framework causing record birefringence in thiophosphates

Infrared birefringent crystals that hold significant importance for optoelectronic application have been rarely reported. Traditional tetrahedral PS4, ethane-like P2S6, and octahedral InS6 units in thiophosphates typically manifest near isotropy, often resulting in extremely small birefringence. However, this study prepares α-Rb2InP2S7 (1), β-Rb2InP2S7 (2), and Cs2InP2S7 (3), consisting of the aforementioned microstructures, notably exhibiting the highest refractive index difference or birefringence values (0.247, 0.298, and 0.250 at 546 nm, respectively) among thiophosphates, the middle one being larger than that of commercial birefringent materials. This unusual increase in birefringence can be primarily attributed to two key factors: (1) simultaneous stretching and compressing of the P-S and In-S covalent bond interactions, generating high polarizability anisotropy of InS6, PS4, and P2S6 polyhedral units; (2) the additional incorporation of alkali metals that further reduces the dimensionality of the crystal structure, creating one-dimensional [InP2S7]2- structures with increasing polarizability anisotropy. This study presents an alternative approach to enhance birefringent materials by reconstructing covalent bond interactions and specific spatial arrangements.

Optimization of Functional Building Blocks Generates a Substantial Improvement in Birefringence from Sn2OSO4 to Sn3O2(OH)(HSO4)

In this work, two tin(II)-based sulfates, Sn2OSO4 and Sn3O2(OH)(HSO4), were synthesized via the mild hydrothermal method. Both compounds employ the Sn2+ cation with stereochemically active lone pair (SCALP) electrons and non-π-conjugated tetrahedral anionic groups SO4 as the functional structural blocks. Interestingly, the experimental birefringence of Sn3O2(OH)(HSO4) is 0.169@546 nm, approximately 42 times larger than that of Sn2OSO4, which is 0.004@546 nm. Detailed structural analysis and theoretical calculations suggest that this significant birefringence difference arises from the optimization of functional building blocks in coordination environments and spatial arrangements. Furthermore, both compounds exhibit ultraviolet absorption edges at 308 and 307 nm, respectively. This indicates that Sn3O2(OH)(HSO4) has the potential to be a candidate for an ultraviolet (UV) birefringent crystal. This study offers inspiration for further exploration of tin(II)-based compounds with excellent comprehensive properties.

Sb2O2SeO3 and Sb2O(SeO3)2: Two-Layered Antimony(III) Selenites with Enhanced Birefringence

Two antimony selenites, Sb2O2SeO3 and Sb2O(SeO3)2, were synthesized by simultaneously incorporating stereochemically active lone pair electrons containing SeO32- and Sb3+. These compounds are structured with [SbOx] polyhedra and [SeO3] units within a two-dimensional framework. Both of them exhibit cutoffs at 300 and 330 nm within the ultraviolet (UV) range and demonstrate significant birefringence, with indices of 0.069 and 0.126 at 546 nm, respectively. These properties highlight their potential as UV birefringent materials. Structural analyses and theoretical calculations reveal that their exceptional birefringence results from the synergistic interactions between SeO32- anions and Sb3+ cations.

Two Short-Wave UV Beryllium Selenites Exhibiting Diverse Optical Properties Stemming from Functional Group Arrangements

The arrangement of functional groups exerts a crucial role in determining the characteristics of compounds. In this study, we synthesized two novel short-wave ultraviolet (UV) nonlinear optical (NLO) crystals: KBe2(SeO3)2(OH)·H2O and K2Be(SeO3)2. Interestingly, the two compounds show the same SeO3 triangular pyramids and K-O polyhedra. However, the two compounds exhibit distinct beryllium-oxygen anion groups: BeO3(OH) for KBe2(SeO3)2(OH)·H2O and BeO4 for K2Be(SeO3)2. This results in the SeO3 groups within the structure having different orientations, ultimately leading to the two compounds exhibiting completely different optical properties. KBe2(SeO3)2(OH)·H2O displays a large second harmonic generation (SHG) effect equivalent to 2× KH2PO4 (KDP), coupled with a large birefringence of 0.078 at 546 nm. In contrast, the SHG effect and birefringence of K2Be(SeO3)2 are only 0.33× that of KDP and 0.024 at 546 nm, respectively. Structural analyses and theoretical calculations indicate that these pronounced differences in optical properties stem from variations in the arrangement of the SeO3 functional groups. This study not only sheds light on the correlation between crystal structure and optical behavior but also presents a hopeful avenue for the advancement of materials in the short-wave UV spectrum.

KBa3M2F14Cl (M = Zr, Hf): novel short-wavelength mixed metal halides with the largest second-harmonic generation responses contributed by mixed functional moieties

The development of short-wavelength nonlinear optical (NLO) materials is indispensable and urgently required for further applications. Halides have been disregarded as potential NLO materials with deep-ultraviolet (DUV) cutoff edges due to their weak second-harmonic generation (SHG) response and poor birefringence. Here, two novel and isostructural halides, KBa3M2F14Cl (M = Zr (KBZFC), Hf (KBHFC)), possess structures that are formed by isolated MF7 monocapped triangular prisms and dissociative K+, Ba2+, and Cl- ions. Compared with reported metal halides that are transparent to the DUV region, KBZFC and KBHFC possess the strongest SHG responses (approximately 1, 0.9 × KH2PO4), which are contributed by the synergistic effect of MF7 (M = Zr, Hf) groups, Ba2+ cations, and Cl- ions. The zero-dimensional structures favour sufficient birefringences (0.12, 0.10 @ 1064 nm) for phase-matchable (PM) behaviours. The discovery of KBZFC and KBHFC showcases the potential of NLO mixed metal halides transparent to the DUV region.

From Cd(SCN)2(CH4N2S)2 to Cd(SCN)2(C4H6N2)2: Controlling Sulfur Content in Thiocyanate Systems Significantly Improves the Overall Performance of UV Nonlinear Optical Materials

Combining a strong second-order nonlinear optical (NLO) effect (>1×KH2PO4 (KDP)), a large band gap (>4.2 eV), and a moderate birefringence in ultraviolet (UV) NLO crystals remains a formidable challenge. Herein, Cd(SCN)2(C4H6N2)2, the first example of a thiocyanate capable of realizing a phase-matched UV NLO crystal material, is obtained by reducing the sulfur (S) content in the centrosymmetric (CS) structure of Cd(SCN)2(CH4N2S)2. Compared to the "shoulder-to-shoulder" one-dimensional (1D) chain of Cd(SCN)2(CH4N2S)2, Cd(SCN)2(C4H6N2)2 has a different sawtooth 1D chain structure. Cd(SCN)2(CH4N2S)2 has second harmonic generation (SHG) inertia with a band gap of 3.90 eV and a UV cutoff edge of 342 nm, however, it possesses a large birefringence (0.35@546 nm). In contrast, the symmetry center breaking of Cd(SCN)2(C4H6N2)2 leads to remarkably strong SHG intensity (10 times that of KDP). Furthermore, it has a wide band gap (4.74 eV), short UV cutoff edge (234 nm), and moderate birefringence capable of phase matching (0.17@546 nm). This research indicates that thiocyanates are a promising class of UV NLO crystal materials, and that modulation of the sulfur content of CS thiocyanates is an effective strategy for the development of UV NLO crystals with excellent overall performances.

Wide band gap selenide infrared nonlinear optical materials AIIMg6Ga6Se16 with strong SHG responses and high laser-induced damage thresholds

Infrared (IR) nonlinear optical (NLO) materials with strong NLO response, wide band gap and high laser-induced damage threshold (LIDT) are highly expected in current laser technologies. Herein, by introducing double alkaline-earth metal (AEM) atoms, three wide band gap selenide IR NLO materials AIIMg6Ga6Se16 (AII = Ca, Sr, Ba) with excellent linear and NLO optical properties have been rationally designed and fabricated. AIIMg6Ga6Se16 (AII = Ca, Sr, Ba) are composed of unique [AIISe6] triangular prisms, [MgSe6] octahedra and [GaSe4] tetrahedra. The introduction of double AEMs effectively broadens the band gaps of selenide-based IR NLO materials. Among them, CaMg6Ga6Se16, achieving the best balance between the second-harmonic generation response (∼1.5 × AgGaS2), wide band gap (2.71 eV), high LIDT (∼9 × AgGaS2), and moderate birefringence of 0.052 @ 1064 nm, is a promising NLO candidate for high power IR laser. Theoretical calculations indicate that the NLO responses and band gaps among the three compounds are mainly determined by the NLO-active [GaSe4] units. The results enrich the chemical diversity of chalcogenides, and give some insight into the design of new functional materials based on the rare [AIISe6] prismatic units.

Hg16O12(NO3)6F2(H2O): A Mercury-Rich Nitrate Oxyfluoride with Diverse Triple-Coordinated Mercury-Based Units That Exhibits an Unparalleled [(Hg16O12F2(H2O))6+]∞ Cationic Framework and a Large Birefringence

Designing new compounds based on anion regulation has been widely favored due to the production of diverse crystal structures and excellent optical properties. Here, a new nitrate oxyfluoride, Hg16O12(NO3)6F2(H2O), has been obtained through a hydrothermal reaction. It crystallizes in the centric Ibca space group and shows a novel three-dimensional [(Hg16O12F2(H2O))6+]∞ cationic framework composed of interconnected HgO2F, HgO3, and HgO2(H2O) units, with isolated NO3- groups as balanced anions to build the whole structure. Notably, the HgO2F and HgO2(H2O) units are first presented here among mercury (Hg)-based compounds. Additionally, Hg16O12(NO3)6F2(H2O) exhibits a large birefringence of 0.17 at 546 nm. This work enriches the multiformity of Hg-based compounds and provides a route for developing promising birefringent materials.

Polysubstitution Induced Centrosymmetric-to-Noncentrosymmetric Structural Transformation and Nonlinear-Optical Behavior: The Case of Na0.45Ag0.55Ga3Se5

Obtaining compounds with large nonlinear-optical (NLO) coefficients and wide band gaps is challenging due to their competitive requirements for chemical bonds. Herein, the first member with mixed cations on the A site in the A-M3-Q5 or A-Ag-M6-Q10 (A = alkali metal; M = Ga, In; Q = S, Se, Te) family, viz. Na0.45Ag0.55Ga3Se5 (NAGSe), was obtained by a solid-state reaction. Its structure features [GaSe4] tetrahedra built three-dimensional {[Ga3Se5]-}∞ network, with Na and Na/Ag cations located at the octahedral cavities. Noncentrosymmetric (R32) NAGSe can also be transformed from centrosymmetric RbGa3S5 (P21/c) via multiple-site cosubstitution. NAGSe exhibits the highest NLO response (1.9 × AGS) in the A-Ag-M-Q family. Crystal structure analysis and theoretical calculations suggest that the NLO response is mainly contributed by the regularly arranged [GaSe4] units. This work enriches the exploration of the undeveloped A-M3-Q5 or A-Ag-M6-Q10 family as potential infrared NLO materials.

Hg4(Te2O5)(SO4): A Giant Birefringent Sulfate Crystal Triggered by a Highly Selective Cation

Sulfate crystals are often criticized for their low birefringence. The small anisotropic SO4 group is becoming the biggest bottleneck hindering the application of sulfates in optical functional materials. In this study, we report a new method to significantly enhance the birefringence of sulfates. The title compound increases the birefringence recording of sulfates to 0.542@546 nm, which is significantly larger than that of the commercial birefringent crystal of TiO2 (0.306@546.1 nm). At the infrared wavelength, the birefringence of Hg4(Te2O5)(SO4) can be up to 0.400@1064 nm, which is also much larger than the infrared birefringent crystal of YVO4 (0.209@1064 nm). In addition, it also has a wide transparency range, high thermal stability, and excellent environmental stability, making it a potential birefringent material. Hg4(Te2O5)(SO4) features a novel two-dimensional layered structure composed of [Hg4(Te2O5)]2+ layers separated by isolated (SO4)2- tetrahedra. This compound was designed by introducing a highly selective cation in a tellurite sulfate system. The low valence low coordination cations connect with tellurite groups only, making the sulfate isolated in the structure. The steric repulsive action of the isolated SO4 tetrahedra may regulate the linear and lone pair groups arranged in a way that favors large birefringence. This method can be proven by theoretical calculations. PAWED studies showed that the large birefringence originated from the synergistic effect of (Hg2O2)2-, (Te2O5)2-, and (SO4)2- units, with a contribution ratio of 42.17, 37.92, and 19.88%, respectively. Our work breaks the limitation of low birefringence in sulfates and opens up new possibilities for their application as birefringent crystals.

Secondary-Bond-Driven Construction of a Polar Material Exhibiting Strong Broad-Spectrum Second-Harmonic Generation and Large Birefringence

Considerable effort has been invested in the development of non-centrosymmetric (NCS) inorganic solids for ferroelectricity-, piezoelectricity- and, particularly, optical nonlinearity-related applications. While great progress has been made, a persistent problem is the difficulty in constructing NCS materials, which probably stems from non-directionality and unsaturation of the ionic bonds between metal counter-cations and covalent anionic modules. We report herein a secondary-bond-driven approach that circumvents the cancellation of dipole moments between adjacent anionic modules that has plagued second-harmonic generation (SHG) material design, and which thereby affords a polar structure with strong SHG properties. The resultant first NCS counter-cation-free iodate, VO2 (H2 O)(IO3 ) (VIO), a new class of iodate, crystallizes in a polar lattice with∞ 1 [ ${{}_{{\rm { \infty }}}{}^{{\rm { 1}}}{\rm { [}}}$ VO2 (H2 O)(IO3 )] zigzag chains connected by weak hydrogen bonds and intermolecular forces. VIO exhibits very large SHG responses (18 × KH2 PO4 @ 1200 nm, 1.5 × KTiOPO4 @ 2100 nm) and sufficient birefringence (0.184 @ 546 nm). Calculations and crystal structure analysis attribute the large SHG responses to consistent polarization orientations of the∞ 1 [ ${{}_{{\rm { \infty }}}{}^{{\rm { 1}}}{\rm { [}}}$ VO2 (H2 O)(IO3 )] chains controlled by secondary bonds. This study highlights the advantages of manipulating the secondary bonds in inorganic solids to control NCS structure and optical nonlinearity, affording a new perspective in the development of high-performance NLO materials.

Giant Optical Anisotropy in a Covalent Molybdenum Tellurite via Oxyanion Polymerization

Large birefringence is a crucial but hard-to-achieve optical parameter that is a necessity for birefringent crystals in practical applications involving modulation of the polarization of light in modern opto-electronic areas. Herein, an oxyanion polymerization strategy that involves the combination of two different types of second-order Jahn-Teller distorted units is employed to realize giant anisotropy in a covalent molybdenum tellurite. Mo(H2O)Te2O7 (MTO) exhibits a record birefringence value for an inorganic UV-transparent oxide crystalline material of 0.528 @ 546 nm, which is also significantly larger than those of all commercial birefringent crystals. MTO has a UV absorption edge of 366 nm and displays a strong powder second-harmonic generation response of 5.4 times that of KH2PO4. The dominant roles of the condensed polytellurite oxyanions [Te8O20]8- in combination with the [MoO6]6- polyhedra in achieving the giant birefringence in MTO are clarified by structural analysis and first-principles calculations. The results suggest that polymerization of polarizability-anisotropic oxyanions may unlock the promise of birefringent crystals with exceptional birefringence.

Novel antimony phosphates with enlarged birefringence induced by lone pair cations

Phosphates, whose obvious disadvantage is the relatively small birefringence, can be overcome by the introduction of post-transition metal cations containing stereochemically active lone-pair electrons. In this paper, two new compounds were successfully explored in the A-Sb-P-O system, i.e. Cs2Sb3O(PO4)3 (CsSbPO) and (NH4)2Sb4O2(H2O)(PO4)2[PO3(OH)]2 (NH4SbPOH). Transmission spectra show that CsSbPO has a surprising transmission range with a UV cutoff edge of 213 nm. First-principles calculations show that both compounds have a wide band gap (5.02 eV for CsSbPO and 5.30 eV for NH4SbPOH) and enlarged birefringence (Δn = 0.034@1064 nm for CsSbPO and Δn = 0.045@1064 nm for NH4SbPOH). The results of real-space atom-cutting investigations show that the distorted [SbOx] polyhedra originating from the asymmetric lone pair electrons give the main contribution to the total birefringence and overcome the disadvantage of small birefringence of phosphates but maintain wide transition windows.

Designing Sulfate Crystals with Strong Optical Anisotropy through π-Conjugated Tailoring

Sulfate crystals typically exhibit minimal optical anisotropy due to the near-zero polarizability anisotropy (δ) of [SO4 ]2- tetrahedra, arising from highly symmetrical electron clouds. Recent research sought to enhance δ via chemical modifications, such as fluorination. However, the resultant crystals often maintain subpar optical anisotropy, frequently with birefringence values below 0.1. In this study, we have uncovered that δ can be significantly strengthened by chemically tailoring the tetrahedral [SO4 ]2- with anisotropic π-conjugated modules. This has been demonstrated by several newly proposed S-O-Org (Org: π-conjugated organic species) moieties, which show a sharp increase in δ based on theoretical computations. To further validate this experimentally, we synthesized and characterized six new 3-pyridinesulfonate crystals with the formula A(3-C5 H4 NSO3 ) ⋅ xH2 O (A=Li, Ag, K, Rb, Cs, and NH4 ; x=0 and 1). Notably, these materials exhibit strong optical anisotropy, with birefringence values ranging from 0.240 to 0.312 at 546 nm. These values are approximately 23 to 145.5 times greater than those of corresponding sulfates, and they outperform a vast number of sulfate-related optical materials, thus verifying the effectiveness of the proposed strategy. Furthermore, the title compounds exhibit diverse microstructure peculiarities influenced by the size and binding natures of the counter cations.

C(NH2)3Cd(C2O4)Cl(H2O)·H2O and BaCd(C2O4)1.5Cl(H2O)2: Two Oxalate Chlorides Obtained by Chemical Scissors Strategy Exhibiting Low-Dimensional Structural Networks and Balanced Overall Optical Properties

Low-dimensional crystalline materials have attracted much attention due to their special physical and chemical properties. Herein, two new oxalate chlorides, C(NH2)3Cd(C2O4)Cl(H2O)·H2O and BaCd(C2O4)1.5Cl(H2O)2, were synthesized. C(NH2)3Cd(C2O4)Cl(H2O)·H2O presents the unique {[Cd(C2O4)Cl(H2O)]-}∞ zigzag chain, while BaCd(C2O4)1.5Cl(H2O)2 shows a novel {[Cd(C2O4)1.5Cl]2-}∞ layer. They showed large measured band gaps, which were 3.76 and 4.53 eV, respectively, and the latter was the largest band gap in the A-M-C2O4-X (A = Monovalent cationic or alkaline earth metals, X = F, Cl, Br, I) family. They exhibit a large calculated birefringence of 0.075 and 0.096 at 1064 nm, respectively. This study promotes the exploration of synthesizing low-dimensional crystalline materials with balanced overall optical performances by a chemical scissors strategy.

K(NH4)Zn2(PO4)2: a Beryllium-Free Sr2Be2B2O7 Derivative with Enhanced Interlayer Connectivity

A novel zinc phosphate derivative of Sr2Be2B2O7 (SBBO), K(NH4)Zn2(PO4)2 (KNZP), featuring [Zn2P2O8]∞2- double layers akin to the [Be2B2O7]∞4- layers in SBBO, was successfully synthesized via a moderate hydrothermal method. Through the substitution of BeO4 and BO3 with ZnO4 and PO4, the issue of toxicity has been effectively resolved, while the enhanced interlayer interactions facilitated by covalent and hydrogen bonding in KNZP overcome the inherent structural instability. Notably, KNZP exhibits a wide transparent window and a moderate second-harmonic generation (SHG) intensity, reaching 0.7 times that of KH2PO4 (KDP), rendering it type-I phase-matchable, indicating that it is a promising UV nonlinear optical (NLO) material.

Excellent Nonlinear Optical M[M4 Cl][Ga11 S20 ] (M = A/Ba, A = K, Rb) Achieved by Unusual Cationic Substitution Strategy

The typical chalcopyrite AgGaQ2 (Q = S, Se) are commercial infrared (IR) second-order nonlinear optical (NLO) materials; however, they suffer from unexpected laser-induced damage thresholds (LIDTs) primairy due to their narrow band gaps. Herein, what sets this apart from previously reported chemical substitutions is the utilization of an unusual cationic substitution strategy, represented by [[SZn4 ]S12 + [S4 Zn13 ]S24 + 11ZnS4 ⇒ MS12 + [M4 Cl]S24 + 11GaS4 ], in which the covalent Sx Zny units in the diamond-like sphalerite ZnS are synergistically replaced by cationic Mx Cly units, resulting in two novel salt-inclusion sulfides, M[M4 Cl][Ga11 S20 ] (M = A/Ba, A = K, 1; Rb, 2). As expected, the introduction of mixed cations in the GaS4 anionic frameworks of 1 and 2 leads to wide band gaps (3.04 and 3.01 eV), which exceeds the value of AgGaS2 , facilitating the improvement of high LIDTs (9.4 and 10.3 × AgGaS2 @1.06 µm, respectively). Furthermore, compounds 1 and 2 exhibit moderate second-harmonic generation intensities (0.84 and 0.78 × AgGaS2 @2.9 µm, respectively), mainly originating from the orderly packing tetrahedral GaS4 units. Importantly, this study demonstrates the successful application of the cationic substitution strategy based on diamond-like structures to provide a feasible chemical design insight for constructing high-performance NLO materials.

A2Hgx(SeO3)y (A = K, Rb, Cs): Three Alkali Metal Mercury Selenites Featuring Unique 1D [HgOm(SeO3)n]∞ Chains

Herein, three alkali metal mercury selenites, K2Hg2(SeO3)3, Rb2Hg2(SeO3)3, and Cs2Hg3(SeO3)4, were successfully obtained by a hydrothermal method. The three compounds featured same one-dimensional (1D) [HgOm(SeO3)n]∞ chain structure that consisting of distorted Hg-O polyhedra and SeO3 triangular pyramids with stereochemically active lone pair (SCALP) electrons. Interestingly, the rich coordination environment of Hg atoms and the size difference of alkali metal cations lead to diverse arrangement of SeO3 groups, which makes them exhibit different birefringence. The band gaps of the three compounds indicate that they are potential ultraviolet (UV) optical materials. Detailed theoretical calculations demonstrate that the combined effects of SeO3 triangular pyramids and Hg-O polyhedra are responsible for the optical characteristics of the reported compounds.

(C5H6.16N2Cl0.84)(IO2Cl2): a birefringent crystal featuring unprecedented (IO2Cl2)- anions and π-conjugated organic cations

Birefringent crystals can manipulate the polarization state of lasers and have vital application in polarizers, optical isolators, phase compensators, etc. The design and synthesis of crystals with large birefringence remains a challenging task. To design crystals with large birefringence, we combine an unprecedented chloroiodate(v) group (IO2Cl2)- featuring large polarizability anisotropy and a strong stereochemically active lone pair (SCALP) with the π-conjugated 2-amino-5-chloropyridine group. The superior synergy effect of (IO2Cl2)- and 2-amino-5-chloropyridine groups produces a new birefringent crystal, namely (C5H6.16N2Cl0.84)(IO2Cl2). It exhibits remarkably large birefringence of 0.67 at 546 nm, far exceeding those of most visible birefringent materials reported. This work discovers the first chloroiodate(v) group and provides a new synthetic route for birefringent materials.

Free Halogen Substitution of Chiral Hybrid Metal Halides for Activating the Linear and Nonlinear Chiroptical Properties

Halogen substitution has been proven as an effective approach to the band gap engineering and optoelectronic modulation of organic-inorganic hybrid metal halide (OIHMH) materials. Various high-performance mixed halide OIHMH film materials have been primarily obtained through the substitution of coordinated halogens in their inorganic octahedra. Herein, we propose a new strategy of substitution of free halogen outside the inorganic octahedra for constructing mixed halide OIHMH single crystals with chiral structures, resulting in a boost of their linear and nonlinear chiroptical properties. The substitution from DMA4[InCl6]Cl (DMA = dimethylammonium) to DMA4[InCl6]Br crystals through a facile antisolvent vaporization method produces centimeter-scale single crystals with high thermal stability along with high quantum yield photoluminescence, conspicuous circularly polarized luminescence, and greatly enhanced second harmonic generation (SHG). In particular, the obtained DMA4[InCl6]Br single crystal features an intrinsic chiral structure, exhibiting a significant SHG circular dichroism (SHG-CD) response with a highest reported anisotropy factor (gSHG-CD) of 1.56 among chiral OIHMH materials. The enhancements in both linear and nonlinear chiroptical properties are directly attributed to the modulation of octahedral distortion. The mixed halide OIHMH single crystals obtained by free halogen substitution confine the introduced halogens within free halogen sites of the lattice, thereby ensuring the stability of compositions and properties. The successful employment of such a free halogen substitution approach may broaden the horizon of the regulation of structures and the optoelectronic properties of the OIHMH materials.

Two van der Waals Layered Antimony(III) Phosphites as UV Optical Materials

Herein, two new Sb3+-based phosphites, Sb2O2(HPO3) (I) and Sb2O(HPO3)2 (II), were successfully obtained by ingeniously combining Sb3+-based polyhedra containing stereochemically active lone pair (SCALP) and HPO3 polar groups. Both reported compounds exhibit unique 2D van der Waals layered structures, [Sb4O4(HPO3)2]∞ and [Sb2O(HPO3)2]∞, respectively, which favors compounds with large optical anisotropy. Interestingly, the different curvatures of the two layers resulted in the two title compounds showing significantly different birefringences (0.079@546 and 0.046@546 nm, respectively). Both compounds endow wide optical band gaps (4.32 and 4.54 eV, respectively), which indicates their potential as promising ultraviolet (UV) birefringent crystals. The synthesis of the two title compounds enriched Sb3+-based phosphites in the UV region and provided guidance for the subsequent synthesis of superior optical materials.

A Two-Dimensional Hybrid Perovskite With Heat Switching Birefringence

Birefringent crystals that can switch light polarization have important applications in optoelectronics. In the last decades, birefringence is mostly optimized by chemical strategies. Recently, switching birefringence by physical means has attracted much attention. Here, this work reports the observation of heat switching birefringence in a 2D layered hybrid halide perovskite (C2 N3 H4 )2 PbCl4 ((C2 N3 H4 )+ =1,2,4-triazolium). This heat switching birefringence leads to a significant change in the interference color for the crystal plate under the illumination of orthogonal polarized light. Structure analyses reveal a heat dependent structure transition in (C2 N3 H4 )2 PbCl4 , whose birefringence is switched by the change in the distortion degree of PbCl6 octahedron. This discovery may be beneficial to the further development of stimuli-responsive polarization optical devices.

Giant Mid-Infrared Second-Harmonic Generation Response in a Densely-Stacked Van Der Waals Transition-Metal Oxychloride

Second-harmonic generation (SHG) is a fundamental optical property of nonlinear optical (NLO) crystals. Thus far, it has proved difficult to engineer large SHG responses, particularly in the mid-infrared region, owing to the difficulty in simultaneously controlling the arrangement and density of functional NLO-active units. Herein, a new assembly strategy employing functional modules only, and aimed at maximizing the density and optimizing the spatial arrangement of highly efficient functional modules, has been applied to the preparation of NLO crystals, affording the van der Waals crystal MoO2 Cl2 . This exhibits the strongest powder SHG response (2.1×KTiOPO4 (KTP) @ 2100 nm) for a transition-metal oxyhalide, a wide optical transparency window, and a sufficient birefringence. MoO2 Cl2 is the first SHG-active transition-metal oxyhalide effective in the infrared region. Theoretical studies and crystal structure analysis suggest that the densely packed, optimally-aligned [MoO4 Cl2 ] modules within the two-dimensional van der Waals layers are responsible for the giant SHG response.

Second-Harmonic Generation in Homochiral Antimony Halides Directed by l-Histidine

Three homochiral organic-inorganic hybrid antimony halides, namely, (L-Hhis)2Sb2Cl8 (1), L-H2his·SbBr5·H2O (2), and (L-H2his)2·Sb3I13·4H2O (3), were prepared to investigate the structure-directing roles of l-histidine (l-his). These compounds feature dimeric, chainlike, and trimeric structures with different optical bandgaps. They display second-harmonic-generation (SHG) responses of 0.1, 2.6, and 0.05 times that of KH2PO4, respectively. Theoretical calculations for compound 2 were carried out to get insights into its structure-property relationship.

Quadruple-Bidentate Nitrate-Ligated A2 Hg(NO3 )4 (A=K, Rb): Strong Second-Harmonic Generation and Sufficient Birefringence

The design of efficient nonlinear optical (NLO) crystals continues to pose significant challenges due to the difficulty of assembling polar NLO-active modules in an optimal additive fashion. We report herein the first NLO-active mercuric nitrates A2 Hg(NO3 )4 (A=(KHNO), Rb (RHNO)), for which assembly is induced by ionic polarization of the d10 cations. The two new crystalline compounds are isostructural, featuring interesting pseudo-diamond-like structures with parallel [Hg(NO3 )4 ] modules, and leading to strong powder second-harmonic generation (SHG) responses of 9.2 (KHNO) and 8.8 (RHNO) times that of KH2 PO4 . In combination with the simple solution preparation of centimeter-scale crystals, sufficient birefringence, and short ultraviolet (UV) cutoff edges, these attributes make KHNO and RHNO promising candidates for UV NLO materials. Theoretical calculations and single-crystal structure analysis reveal that the newly-developed highly condensed and distorted [Hg(NO3 )4 ] module, with an Hg2+ cation that is quadruply bidentate nitrate-ligated, is crucial for the significant SHG responses. This work highlights the potential importance of modules with multiple bidentate ligands for the development of high-performing next-generation NLO materials.

A Hydrogen Bonded Supramolecular Framework Birefringent Crystal

Birefringent crystals could modulate the polarization of light and are widely used as polarizers, waveplates, optical isolators, etc. To date, commercial birefringent crystals have been exclusively limited to purely inorganic compounds such as α-BaB2 O4 with birefringence of about 0.12. Herein, we report a new hydrogen bonded supramolecular framework, namely, Cd(H2 C6 N7 O3 )2 ⋅8 H2 O, which exhibits exceptionally large birefringence up to about 0.60. To the best of our knowledge, the birefringence of Cd(H2 C6 N7 O3 )2 ⋅8 H2 O is significantly larger than those of all commercial birefringent crystals and is the largest among hydrogen bonded supramolecular framework crystals. First-principles calculations and structural analyses reveal that the exceptional birefringence is mainly ascribed to strong covalent interactions within (H2 C6 N7 O3 )- organic ligands and the perfect coplanarity between them. Given the rich structural diversity and tunability, hydrogen bonded supramolecular frameworks would offer unprecedented opportunities beyond the traditional purely inorganic oxides for birefringent crystals.

Improved Birefringence Activated by Tetrahedra Decorated with a Single Linear Unit

Performance enhancement induced by structural modification has long been the target in materials science fields. Direct evidence to witness the effectivity of one strategy is challenging and necessary. In this work, a tetrahedra-decoration strategy was proposed to improve the birefringent performance sharply, namely decorating the tetrahedra with a single linear [S2 ] unit. The strategy was verified by comprehensive characterization of two thiogermanates K2 BaGeS4 and K2 BaGeS5 , which crystallize in the same space group, have similar unit cells and the same units arrangements. Theoretical characterization verified that the [GeS5 ] group has much larger polarization anisotropy than [GeS4 ], further demonstrated that the linear [S2 ] led to the sharp birefringence enlargement of K2 BaGeS5 (0.19 vs 0.03 of K2 BaGeS4 ). This work provides a new guiding thought to improve the birefringence performance.

Li2RbSO4Cl with a Short Ultraviolet Absorption Edge and an Acentric Structure through Assembling Heteroleptic [LiO3Cl] Tetrahedra

Currently, short-wavelength nonlinear optical materials are urgently needed. Through substituting homoleptic [LiO4] in centrosymmetric LiRbSO4 with heteroleptic [LiO3Cl] tetrahedra, an acentric sulfate chloride, Li2RbSO4Cl, was designed and synthesized by the high-temperature melting method. Li2RbSO4Cl shows a relatively short ultraviolet absorption edge (<200 nm) among newly reported sulfate chlorides. Millimeter-sized crystals were grown due to the congruent melting behavior and high thermal stability of the compound.

Centrosymmetric Rb2Sb(C2O4)2.5(H2O)3 and Noncentrosymmetric RbSb2(C2O4)F5: Two Antimony (III) Oxalates as UV Optical Materials

Herein, we have successfully synthesized two rubidium antimony (III) oxalates, namely, Rb2Sb(C2O4)2.5(H2O)3 and RbSb2(C2O4)F5, utilizing a low-temperature hydrothermal method. These two compounds share a similar chemical composition, consisting of Sb3+ cations with active lone pair electrons, alkali metal Rb+ ions, and planar π-conjugated C2O42- anions. However, they exhibit different symmetries, Rb2Sb(C2O4)2.5(H2O)3 is centrosymmetric (CS), while RbSb2(C2O4)F5 is noncentrosymmetric (NCS), which should be caused by the presence of F- ions. Notably, the NCS compound, RbSb2(C2O4)F5, demonstrates a moderate second-harmonic generation (SHG) response, approximately 1.3 times that of KH2PO4 (KDP), and exhibits a large birefringence of 0.09 at 546 nm. These characteristics indicate that RbSb2(C2O4)F5 holds promising potential as a nonlinear optical material for ultraviolet (UV) applications. Detailed structural analysis and theoretical calculations confirm that the excellent optical properties arise from the synergistic effects between Sb3+ cations with SCALP and planar π-conjugated [C2O4]2- groups.

Stereochemically Active Tin(II)-Induced Enhancement of Birefringence in SnII SnIV (PO4 )2 and SrSn(PO4 )PO2 (OH)2

Two new tin(II) phosphates, SnII SnIV (PO4 )2 and SrSn(PO4 )PO2 (OH)2 , were synthesized by the high-temperature solution method and hydrothermal method, respectively. Theoretical study indicates that by introducing tin(II) with stereochemical activity lone pairs (SCALP) in metal phosphates, the birefringence was enhanced, 0.048@1064 nm for SnII SnIV (PO4 )2 and 0.080@1064 nm for SrSn(PO4 )PO2 (OH)2 .

From Centrosymmetry to Noncentrosymmetry: Precise Structural Regulation and Characterization on ZnHPO3·2H2O Polymorphs

Polymorphs of ZnHPO₃·2H₂O with centrosymmetry (Cmcm) and noncentrosymmetry (C2) structures were prepared by modified solution evaporation and seed-crystal-induced secondary nucleation methods. In Cmcm-ZnHPO₃·2H₂O, the zinc atoms are only octahedrally coordinated, while in C2-ZnHPO₃·2H₂O, they feature both tetrahedral and octahedral coordination. As a result, Cmcm-ZnHPO₃·2H₂O features a 2D layered structure with lattice water molecules located in the interlayer space, while C2-ZnHPO₃·2H₂O features a 3D electroneutral framework of tfa topology connected by Zn(1)O₄, Zn(2)O₆, and HPO₃ units. The UV-visible diffuse reflectance spectra associated with Tauc's analyses give a direct bandgap of 4.24 and 4.33 eV for Cmcm-ZnHPO₃·2H₂O and C2-ZnHPO₃·2H₂O, respectively. Moreover, C2-ZnHPO₃·2H₂O exhibits a weak second harmonic generation (SHG) response and a moderate birefringence for phase matching, indicating its potential as a nonlinear optical material. Detailed dipole moment calculation and analysis confirmed that the SHG response mainly derived from the HPO₃ pseudo-tetrahedra.

All-organic polymeric materials with high refractive index and excellent transparency

High refractive index polymers (HRIPs) have drawn attention for their optoelectronic applications and HRIPs with excellent transparency and facile preparation are highly demanded. Herein, sulfur-containing all organic HRIPs with refractive indices up to 1.8433 at 589 nm and excellent optical transparency even in one hundred micrometre scale in the visual and RI region as well as high weight-average molecular weights (up to 44500) are prepared by our developed organobase catalyzed polymerization of bromoalkynes and dithiophenols in yields up to 92%. Notably, the fabricated optical transmission waveguides using the resultant HRIP with the highest refractive index display a reduced propagation loss compared with that generated by the commercial material of SU-8. In addition, the tetraphenylethylene containing polymer not only exhibits a reduced propagation loss, but also is used to examine the uniformity and continuity of optical waveguides with naked eyes because of its aggregation-induced emission feature.

Controlling the Nonlinear Optical Behavior and Structural Transformation with A-Site Cation in α-AZnPO4 (A = Li, K)

Regulating the crystal structure by A-site cation substitution is one of the effective methods to explore high-performance nonlinear optical (NLO) materials. Herein, two non-centrosymmetric (NCS) compounds, α-MZnPO₄ (M = Li, K) with short UV absorption edges 221 and 225 nm, are obtained by performing A-site cation substitution method. It is noteworthy that α-LiZnPO₄ (α-LZPO) achieves >10 times second harmonic generation (SHG) response (2.3 × KDP) enhancement compared with that of α-KZnPO₄ (α-KZPO) (0.2 × KDP), which is the only case among phosphates with different A-site cations. By structural comparison, it is found that the A-site cations play important roles for anion rearrangements, and further the structure features of the two compounds by designing two suppositional crystal models as well as performing other theoretical calculations are analyzed. The study confirms the feasibility to design promising NLO materials with strengthen SHG response and structural stability in orthophosphate system.

A Rare-Earth Selenite with Unexpectedly Well-Balanced Ultraviolet Nonlinear Optical Functionality, Sc(HSeO3 )3

Establishing high performance ultraviolet (UV) nonlinear optical (NLO) selenite crystals with well-balanced properties is very challenging attributable to their strong absorption for UV light. Here a rare-earth selenite, Sc(HSeO₃ )₃ , with excellent UV NLO properties is introduced. Sc(HSeO₃ )₃ crystallizing in the polar NCS space group, Cc, features a 3D archetiture built up by interconnected ScO₆ octahedra and HSeO₃ groups. The crystal exhibits remarkably well-balanced UV-NLO functionality, namely, the shortest absorption edge (214 nm) among NLO-active selenites, wide bandgap (5.28 eV), large phase-matchable SHG response (5 × KDP), and sufficiently large birefringence (cal. 0.105 @1064 nm). Detailed DFT calculations have been performed to elucidate the structure-property relationships. This work provides a new example of discovering novel UV NLO selenite materials.

[K2 PbX][Ga7 S12 ] (X = Cl, Br, I): The First Lead-Containing Cationic Moieties with Ultrahigh Second-Harmonic Generation and Band Gaps Exceeding the Criterion of 2.33 eV

In contrast to anionic group theory of nonlinear optical (NLO) materials that second-harmonic generation (SHG) responses mainly originate from anionic groups, structural regulation on the cationic groups of salt-inclusion chalcogenides (SICs) is performed to make them also contribute to the NLO effects. Herein, the stereochemically active lone-electron-pair Pb2+ cation is first introduced to the cationic groups of NLO SICs, and the resultant [K2 PbX][Ga7 S12 ] (X = Cl, Br, I) are isolated via solid-state method. The features of their three-dimensional structures comprise highly oriented [Ga7 S12 ]3- and [K2 PbX]3+ frameworks derived from AgGaS2 , which display the largest phase-matching SHG intensities (2.5-2.7 × AgGaS2 @1800 nm) among all SICs. Concurrently, three compounds manifest band gap values of 2.54, 2.49, and 2.41 eV (exceeding the criterion of 2.33 eV), which can avoid two-photon absorption under the fundamental laser of 1064 nm, along with the relatively low anisotropy of thermal expansion coefficients, leading to improved laser-induced damage thresholds (LIDTs) values of 2.3, 3.8, and 4.0 times that of AgGaS2 . In addition, the density of states and SHG coefficient calculations demonstrate that the Pb2+ cations narrow the band gaps and benefit SHG responses.

Host-Guest Symmetry Matching in Two Crystalline Magnesium Sulfate Oxalates Obtained Via a Solvent-Free Route

The combination of π-conjugated oxalate anion with sulfate group has been explored in the solvent-free synthesis of two new magnesium sulfate oxalates. One of them has a layered structure crystallized in the noncentrosymmetric space group Ia, while the other has a chainlike structure crystallized in the centrosymmetric space group P2₁/c. The noncentrosymmetric solid has a wide optical bandgap and exhibits a moderate second-harmonic-generation response. Density functional theory calculations were carried out to disclose the origin of its second-order nonlinear-optical response.

Unveiling the Superior Optical Properties of Novel Melamine-Based Nonlinear Optical Material with Strong Second-Harmonic Generation and Giant Optical Anisotropy

Two melamine-based metal halides, (C₃ N₆ H₇ )(C₃ N₆ H₆ )HgCl₃ (I) and (C₃ N₆ H₇ )₃ HgCl₅ (II), are synthesized by incorporating the heavy d¹⁰ cation, Hg²⁺ , and the halide anion, Cl^- . The noncentrosymmetric structure of I results from two unique attributes: large asymmetric secondary building units produced by direct covalent coordination of melamine to Hg²⁺ and a small dihedral angle between melamine molecules. The former makes inorganic modules locally acentric, while the latter prevents planar organic groups from forming deleterious antiparallel arrangement. The unique coordination in I results in an enlarged band gap of 4.40 eV. Due to the large polarizability of the heavy Hg²⁺ cation and the π-conjugated system of melamine, I exhibits a strong second-harmonic generation efficiency of 5 × KH₂ PO₄ , larger than any reported melamine-based nonlinear optical materials to date. Density functional theory calculations indicate that I possesses giant optical anisotropy, with a birefringence of 0.246@1064 nm.

Two Mixed-Alkali-Metal Selenates as Short-Wave Ultraviolet Nonlinear-Optical Materials

Two novel mixed-alkali-metal selenate nonlinear-optical (NLO) crystals, Na₃Li(H₂O)₃(SeO₄)₂·3H₂O (I) and CsLi₃(H₂O)(SeO₄)₂ (II), have been successfully synthesized by an aqueous solution evaporation method. Both compounds feature the unique layers constructed of the same functional moieties including SeO₄ and LiO₄ tetrahedra: [Li(H₂O)₃(SeO₄)₂·3H₂O]_∞^3- layers in I and [Li₃(H₂O)(SeO₄)₂]_∞^- layers in II. The titled compounds display wide optical band gaps of 5.62 and 5.66 eV, respectively, according to the UV-vis spectra. Interestingly, they exhibit significantly different second-order nonlinear coefficients (0.34 × KDP and 0.70 × KDP, respectively). Detailed dipole moment calculations manifest that the large disparity can be attributed to the difference in the dipole moment of the crystallographically independent SeO₄ and LiO₄ groups. This work confirms that alkali-metal selenate system is an excellent candidate for short-wave ultraviolet NLO materials.

Pb2Cl2(HPO3)(H2O) and Pb3Br2(HPO3)2: Two Phosphite Halides with 3D Structural Networks and Enlarged Birefringence

Compounds constructed by mixed anions are widely favorable for their diverse crystal structures and physical performances. Here, two lead phosphite halides, Pb₂Cl₂(HPO₃)(H₂O) (1) and Pb₃Br₂(HPO₃)₂ (2), were obtained by facile hydrothermal reactions. Both compounds crystallize in the space group Pnma. 1 exhibits a 3D structure composed of HPO₃ units, PbCl₄O₃ pentagonal bipyramids, and PbO₃ pyramids. 2 also shows a 3D framework built by HPO₃ units, PbO₂Br₄ octahedron, PbO₅ and PbO₃Br₂ square pyramids. By introducing halogen anions to the lead phosphite system, 1 and 2 show enhanced birefringences of 0.083 and 0.072 at 1064 nm, respectively, compared with 0.023@1064 nm for Pb₂(HPO₃)₂. In this work, syntheses, crystal structures, optical properties, and theoretical calculation results have been studied in detail.

d6versus d10, Which Is Better for Second Harmonic Generation Susceptibility? A Case Study of K2TGe3Ch8 (T = Fe, Cd; Ch = S, Se)

Two acentric chalcogenide compounds, K₂CdGe₃S₈ and K₂CdGe₃Se₈, were synthesized via conventional high-temperature solid-state reactions. The crystal structures of K₂CdGe₃S₈ and K₂CdGe₃Se₈ were accurately determined by single-crystal X-ray diffraction and crystallize in the K₂FeGe₃S₈ structure type. K₂CdGe₃S₈ is isostructural to K₂FeGe₃S₈ with superior nonlinear optical properties. For the second harmonic generation (SHG) response, K₂CdGe₃S₈ is 18× K₂FeGe₃S₈ for samples of particle size of 38-55 μm. The superior nonlinear optical properties of K₂CdGe₃S₈ over K₂FeGe₃S₈ are mainly contributed by the chemical characteristics of Cd compared with Fe, which are elucidated by nonlinear optical property measurements, electronic structure calculations, and density functional theory calculations. The [CdS₄] tetrahedra within K₂CdGe₃S₈ exhibit a higher degree of distortion and larger volume compared to the [FeS₄] tetrahedra in K₂FeGe₃S₈. This study possesses a good platform to investigate how d-block elements contribute to the SHG response. The fully occupied d¹⁰-elements are better for SHG susceptibility than d⁶-elements in this study. K₂CdGe₃S₈ is a good candidate as an infrared nonlinear optical material of high SHG response (2.1× AgGaS₂, samples of particle size of 200-250 μm), type-I phase-matching capability, high laser damage threshold (6.2× AgGaS₂), and good stability.

SbHPO3F: 2D van der Waals Layered Phosphite Exhibiting Large Birefringence

A novel antimony(III)-based phosphite, SbHPO₃F, featuring a unique two-dimensional (2D) van der Waals layered structure, has been successfully designed and synthesized via the simultaneous employment of optically active moieties including SbO₃F seesaw and tetrahedral HPO₃ groups. Its optimized layered arrangement formed by the alternating connection of 4-membered rings (4-MRs) and 8-MRs endows the title compound with desirable optical properties including a large birefringence and short ultraviolet (UV) cutoff edge, implying that it is a potential UV birefringent material.

[C(NH2)3]2MoO2F4·H2O: Unique Chinese-Knot Structure Revealing Superior Nonlinear-Optical Properties

A novel organic-inorganic hybrid guanidine fluoromolybdate, [C(NH₂)₃]₂MoO₂F₄·H₂O, was successfully synthesized via our proposed cation-anion synergetic interaction strategy. The title compound features a unique Chinese-knot structure constructed by hydrogen-bonding interactions, which induces an all-around improvement of the optical band gap, second-harmonic-generation effect, and phase-matchable ability compared with the reported fluoromolybdates, demonstrating that it is a promising UV nonlinear-optical material.